diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
32 files changed, 9249 insertions, 6630 deletions
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig index 47844575caa..c9f81a388f1 100644 --- a/drivers/net/wireless/ath/ath5k/Kconfig +++ b/drivers/net/wireless/ath/ath5k/Kconfig @@ -1,10 +1,13 @@ config ATH5K tristate "Atheros 5xxx wireless cards support" - depends on PCI && MAC80211 + depends on (PCI || ATHEROS_AR231X) && MAC80211 + select ATH_COMMON select MAC80211_LEDS select LEDS_CLASS select NEW_LEDS select AVERAGE + select ATH5K_AHB if (ATHEROS_AR231X && !PCI) + select ATH5K_PCI if (!ATHEROS_AR231X && PCI) ---help--- This module adds support for wireless adapters based on Atheros 5xxx chipset. @@ -38,3 +41,35 @@ config ATH5K_DEBUG modprobe ath5k debug=0x00000400 +config ATH5K_TRACER + bool "Atheros 5xxx tracer" + depends on ATH5K + depends on EVENT_TRACING + ---help--- + Say Y here to enable tracepoints for the ath5k driver + using the kernel tracing infrastructure. Select this + option if you are interested in debugging the driver. + + If unsure, say N. + +config ATH5K_AHB + bool "Atheros 5xxx AHB bus support" + depends on (ATHEROS_AR231X && !PCI) + ---help--- + This adds support for WiSoC type chipsets of the 5xxx Atheros + family. + +config ATH5K_PCI + bool "Atheros 5xxx PCI bus support" + depends on (!ATHEROS_AR231X && PCI) + ---help--- + This adds support for PCI type chipsets of the 5xxx Atheros + family. + +config ATH5K_TEST_CHANNELS + bool "Enables testing channels on ath5k" + depends on ATH5K && CFG80211_CERTIFICATION_ONUS + ---help--- + This enables non-standard IEEE 802.11 channels on ath5k, which + can be used for research purposes. This option should be disabled + unless doing research. diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile index 2242a140e4f..1b3a34f7f22 100644 --- a/drivers/net/wireless/ath/ath5k/Makefile +++ b/drivers/net/wireless/ath/ath5k/Makefile @@ -10,9 +10,13 @@ ath5k-y += phy.o ath5k-y += reset.o ath5k-y += attach.o ath5k-y += base.o +CFLAGS_base.o += -I$(src) ath5k-y += led.o ath5k-y += rfkill.o ath5k-y += ani.o ath5k-y += sysfs.o +ath5k-y += mac80211-ops.o ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o +ath5k-$(CONFIG_ATH5K_AHB) += ahb.o +ath5k-$(CONFIG_ATH5K_PCI) += pci.o obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c new file mode 100644 index 00000000000..79bffe165ca --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -0,0 +1,234 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/nl80211.h> +#include <linux/platform_device.h> +#include <linux/etherdevice.h> +#include <linux/export.h> +#include <ar231x_platform.h> +#include "ath5k.h" +#include "debug.h" +#include "base.h" +#include "reg.h" + +/* return bus cachesize in 4B word units */ +static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz) +{ + *csz = L1_CACHE_BYTES >> 2; +} + +static bool +ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) +{ + struct ath5k_hw *ah = common->priv; + struct platform_device *pdev = to_platform_device(ah->dev); + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + u16 *eeprom, *eeprom_end; + + eeprom = (u16 *) bcfg->radio; + eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ; + + eeprom += off; + if (eeprom > eeprom_end) + return false; + + *data = *eeprom; + return true; +} + +int ath5k_hw_read_srev(struct ath5k_hw *ah) +{ + struct platform_device *pdev = to_platform_device(ah->dev); + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + ah->ah_mac_srev = bcfg->devid; + return 0; +} + +static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + struct platform_device *pdev = to_platform_device(ah->dev); + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + u8 *cfg_mac; + + if (to_platform_device(ah->dev)->id == 0) + cfg_mac = bcfg->config->wlan0_mac; + else + cfg_mac = bcfg->config->wlan1_mac; + + memcpy(mac, cfg_mac, ETH_ALEN); + return 0; +} + +static const struct ath_bus_ops ath_ahb_bus_ops = { + .ath_bus_type = ATH_AHB, + .read_cachesize = ath5k_ahb_read_cachesize, + .eeprom_read = ath5k_ahb_eeprom_read, + .eeprom_read_mac = ath5k_ahb_eeprom_read_mac, +}; + +/*Initialization*/ +static int ath_ahb_probe(struct platform_device *pdev) +{ + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + struct ath5k_hw *ah; + struct ieee80211_hw *hw; + struct resource *res; + void __iomem *mem; + int irq; + int ret = 0; + u32 reg; + + if (!dev_get_platdata(&pdev->dev)) { + dev_err(&pdev->dev, "no platform data specified\n"); + ret = -EINVAL; + goto err_out; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no memory resource found\n"); + ret = -ENXIO; + goto err_out; + } + + mem = ioremap_nocache(res->start, resource_size(res)); + if (mem == NULL) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto err_out; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no IRQ resource found\n"); + ret = -ENXIO; + goto err_iounmap; + } + + irq = res->start; + + hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops); + if (hw == NULL) { + dev_err(&pdev->dev, "no memory for ieee80211_hw\n"); + ret = -ENOMEM; + goto err_iounmap; + } + + ah = hw->priv; + ah->hw = hw; + ah->dev = &pdev->dev; + ah->iobase = mem; + ah->irq = irq; + ah->devid = bcfg->devid; + + if (bcfg->devid >= AR5K_SREV_AR2315_R6) { + /* Enable WMAC AHB arbitration */ + reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN; + iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + + /* Enable global WMAC swapping */ + reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP); + reg |= AR5K_AR2315_BYTESWAP_WMAC; + iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP); + } else { + /* Enable WMAC DMA access (assuming 5312 or 231x*/ + /* TODO: check other platforms */ + reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE); + if (to_platform_device(ah->dev)->id == 0) + reg |= AR5K_AR5312_ENABLE_WLAN0; + else + reg |= AR5K_AR5312_ENABLE_WLAN1; + iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE); + + /* + * On a dual-band AR5312, the multiband radio is only + * used as pass-through. Disable 2 GHz support in the + * driver for it + */ + if (to_platform_device(ah->dev)->id == 0 && + (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) == + (BD_WLAN1 | BD_WLAN0)) + ah->ah_capabilities.cap_needs_2GHz_ovr = true; + else + ah->ah_capabilities.cap_needs_2GHz_ovr = false; + } + + ret = ath5k_init_ah(ah, &ath_ahb_bus_ops); + if (ret != 0) { + dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret); + ret = -ENODEV; + goto err_free_hw; + } + + platform_set_drvdata(pdev, hw); + + return 0; + + err_free_hw: + ieee80211_free_hw(hw); + err_iounmap: + iounmap(mem); + err_out: + return ret; +} + +static int ath_ahb_remove(struct platform_device *pdev) +{ + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct ath5k_hw *ah; + u32 reg; + + if (!hw) + return 0; + + ah = hw->priv; + + if (bcfg->devid >= AR5K_SREV_AR2315_R6) { + /* Disable WMAC AHB arbitration */ + reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN; + iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + } else { + /*Stop DMA access */ + reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE); + if (to_platform_device(ah->dev)->id == 0) + reg &= ~AR5K_AR5312_ENABLE_WLAN0; + else + reg &= ~AR5K_AR5312_ENABLE_WLAN1; + iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE); + } + + ath5k_deinit_ah(ah); + iounmap(ah->iobase); + ieee80211_free_hw(hw); + + return 0; +} + +static struct platform_driver ath_ahb_driver = { + .probe = ath_ahb_probe, + .remove = ath_ahb_remove, + .driver = { + .name = "ar231x-wmac", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ath_ahb_driver); diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c index 6b75b22a929..5c008757662 100644 --- a/drivers/net/wireless/ath/ath5k/ani.c +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -14,8 +14,9 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" -#include "base.h" #include "reg.h" #include "debug.h" #include "ani.h" @@ -28,15 +29,21 @@ * or reducing sensitivity as necessary. * * The parameters are: + * * - "noise immunity" + * * - "spur immunity" + * * - "firstep level" + * * - "OFDM weak signal detection" + * * - "CCK weak signal detection" * * Basically we look at the amount of ODFM and CCK timing errors we get and then * raise or lower immunity accordingly by setting one or more of these * parameters. + * * Newer chipsets have PHY error counters in hardware which will generate a MIB * interrupt when they overflow. Older hardware has too enable PHY error frames * by setting a RX flag and then count every single PHY error. When a specified @@ -46,11 +53,13 @@ */ -/*** ANI parameter control ***/ +/***********************\ +* ANI parameter control * +\***********************/ /** * ath5k_ani_set_noise_immunity_level() - Set noise immunity level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @ATH5K_ANI_MAX_NOISE_IMM_LVL */ void @@ -58,23 +67,23 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) { /* TODO: * ANI documents suggest the following five levels to use, but the HAL - * and ath9k use only use the last two levels, making this + * and ath9k use only the last two levels, making this * essentially an on/off option. There *may* be a reason for this (???), * so i stick with the HAL version for now... */ #if 0 - static const s8 hi[] = { -18, -18, -16, -14, -12 }; static const s8 lo[] = { -52, -56, -60, -64, -70 }; + static const s8 hi[] = { -18, -18, -16, -14, -12 }; static const s8 sz[] = { -34, -41, -48, -55, -62 }; static const s8 fr[] = { -70, -72, -75, -78, -80 }; #else - static const s8 sz[] = { -55, -62 }; static const s8 lo[] = { -64, -70 }; static const s8 hi[] = { -14, -12 }; + static const s8 sz[] = { -55, -62 }; static const s8 fr[] = { -78, -80 }; #endif if (level < 0 || level >= ARRAY_SIZE(sz)) { - ATH5K_ERR(ah->ah_sc, "noise immuniy level %d out of range", + ATH5K_ERR(ah, "noise immunity level %d out of range", level); return; } @@ -88,16 +97,15 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRPWR, fr[level]); - ah->ah_sc->ani_state.noise_imm_level = level; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); + ah->ani_state.noise_imm_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** * ath5k_ani_set_spur_immunity_level() - Set spur immunity level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @max_spur_level (the maximum level is dependent - * on the chip revision). + * on the chip revision). */ void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) @@ -105,8 +113,8 @@ ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) static const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 }; if (level < 0 || level >= ARRAY_SIZE(val) || - level > ah->ah_sc->ani_state.max_spur_level) { - ATH5K_ERR(ah->ah_sc, "spur immunity level %d out of range", + level > ah->ani_state.max_spur_level) { + ATH5K_ERR(ah, "spur immunity level %d out of range", level); return; } @@ -114,14 +122,13 @@ ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, val[level]); - ah->ah_sc->ani_state.spur_level = level; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); + ah->ani_state.spur_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** * ath5k_ani_set_firstep_level() - Set "firstep" level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @ATH5K_ANI_MAX_FIRSTEP_LVL */ void @@ -130,22 +137,20 @@ ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level) static const int val[] = { 0, 4, 8 }; if (level < 0 || level >= ARRAY_SIZE(val)) { - ATH5K_ERR(ah->ah_sc, "firstep level %d out of range", level); + ATH5K_ERR(ah, "firstep level %d out of range", level); return; } AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRSTEP, val[level]); - ah->ah_sc->ani_state.firstep_level = level; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); + ah->ani_state.firstep_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** - * ath5k_ani_set_ofdm_weak_signal_detection() - Control OFDM weak signal - * detection - * + * ath5k_ani_set_ofdm_weak_signal_detection() - Set OFDM weak signal detection + * @ah: The &struct ath5k_hw * @on: turn on or off */ void @@ -178,15 +183,14 @@ ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on) AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN); - ah->ah_sc->ani_state.ofdm_weak_sig = on; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "turned %s", + ah->ani_state.ofdm_weak_sig = on; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "turned %s", on ? "on" : "off"); } - /** - * ath5k_ani_set_cck_weak_signal_detection() - control CCK weak signal detection - * + * ath5k_ani_set_cck_weak_signal_detection() - Set CCK weak signal detection + * @ah: The &struct ath5k_hw * @on: turn on or off */ void @@ -195,19 +199,22 @@ ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on) static const int val[] = { 8, 6 }; AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR, AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]); - ah->ah_sc->ani_state.cck_weak_sig = on; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "turned %s", + ah->ani_state.cck_weak_sig = on; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "turned %s", on ? "on" : "off"); } -/*** ANI algorithm ***/ +/***************\ +* ANI algorithm * +\***************/ /** * ath5k_ani_raise_immunity() - Increase noise immunity - * + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * @ofdm_trigger: If this is true we are called because of too many OFDM errors, - * the algorithm will tune more parameters then. + * the algorithm will tune more parameters then. * * Try to raise noise immunity (=decrease sensitivity) in several steps * depending on the average RSSI of the beacons we received. @@ -218,7 +225,7 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, { int rssi = ewma_read(&ah->ah_beacon_rssi_avg); - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "raise immunity (%s)", + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "raise immunity (%s)", ofdm_trigger ? "ODFM" : "CCK"); /* first: raise noise immunity */ @@ -229,13 +236,13 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, /* only OFDM: raise spur immunity level */ if (ofdm_trigger && - as->spur_level < ah->ah_sc->ani_state.max_spur_level) { + as->spur_level < ah->ani_state.max_spur_level) { ath5k_ani_set_spur_immunity_level(ah, as->spur_level + 1); return; } /* AP mode */ - if (ah->ah_sc->opmode == NL80211_IFTYPE_AP) { + if (ah->opmode == NL80211_IFTYPE_AP) { if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); return; @@ -248,11 +255,11 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, * don't shut out a remote node by raising immunity too high. */ if (rssi > ATH5K_ANI_RSSI_THR_HIGH) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "beacon RSSI high"); /* only OFDM: beacon RSSI is high, we can disable ODFM weak * signal detection */ - if (ofdm_trigger && as->ofdm_weak_sig == true) { + if (ofdm_trigger && as->ofdm_weak_sig) { ath5k_ani_set_ofdm_weak_signal_detection(ah, false); ath5k_ani_set_spur_immunity_level(ah, 0); return; @@ -265,9 +272,9 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { /* beacon RSSI in mid range, we need OFDM weak signal detect, * but can raise firstep level */ - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "beacon RSSI mid"); - if (ofdm_trigger && as->ofdm_weak_sig == false) + if (ofdm_trigger && !as->ofdm_weak_sig) ath5k_ani_set_ofdm_weak_signal_detection(ah, true); if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); @@ -275,9 +282,9 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, } else if (ah->ah_current_channel->band == IEEE80211_BAND_2GHZ) { /* beacon RSSI is low. in B/G mode turn of OFDM weak signal * detect and zero firstep level to maximize CCK sensitivity */ - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "beacon RSSI low, 2GHz"); - if (ofdm_trigger && as->ofdm_weak_sig == true) + if (ofdm_trigger && as->ofdm_weak_sig) ath5k_ani_set_ofdm_weak_signal_detection(ah, false); if (as->firstep_level > 0) ath5k_ani_set_firstep_level(ah, 0); @@ -291,9 +298,10 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, */ } - /** * ath5k_ani_lower_immunity() - Decrease noise immunity + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Try to lower noise immunity (=increase sensitivity) in several steps * depending on the average RSSI of the beacons we received. @@ -303,9 +311,9 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) { int rssi = ewma_read(&ah->ah_beacon_rssi_avg); - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "lower immunity"); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "lower immunity"); - if (ah->ah_sc->opmode == NL80211_IFTYPE_AP) { + if (ah->opmode == NL80211_IFTYPE_AP) { /* AP mode */ if (as->firstep_level > 0) { ath5k_ani_set_firstep_level(ah, as->firstep_level - 1); @@ -320,7 +328,7 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { /* beacon RSSI is mid-range: turn on ODFM weak signal * detection and next, lower firstep level */ - if (as->ofdm_weak_sig == false) { + if (!as->ofdm_weak_sig) { ath5k_ani_set_ofdm_weak_signal_detection(ah, true); return; @@ -353,9 +361,10 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) } } - /** * ath5k_hw_ani_get_listen_time() - Update counters and return listening time + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Return an approximation of the time spent "listening" in milliseconds (ms) * since the last call of this function. @@ -380,9 +389,10 @@ ath5k_hw_ani_get_listen_time(struct ath5k_hw *ah, struct ath5k_ani_state *as) return listen; } - /** * ath5k_ani_save_and_clear_phy_errors() - Clear and save PHY error counters + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Clear the PHY error counters as soon as possible, since this might be called * from a MIB interrupt and we want to make sure we don't get interrupted again. @@ -430,14 +440,14 @@ ath5k_ani_save_and_clear_phy_errors(struct ath5k_hw *ah, return 1; } - /** * ath5k_ani_period_restart() - Restart ANI period + * @as: The &struct ath5k_ani_state * * Just reset counters, so they are clear for the next "ani period". */ static void -ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) +ath5k_ani_period_restart(struct ath5k_ani_state *as) { /* keep last values for debugging */ as->last_ofdm_errors = as->ofdm_errors; @@ -449,9 +459,9 @@ ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) as->listen_time = 0; } - /** * ath5k_ani_calibration() - The main ANI calibration function + * @ah: The &struct ath5k_hw * * We count OFDM and CCK errors relative to the time where we did not send or * receive ("listen" time) and raise or lower immunity accordingly. @@ -464,7 +474,7 @@ ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) void ath5k_ani_calibration(struct ath5k_hw *ah) { - struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + struct ath5k_ani_state *as = &ah->ani_state; int listen, ofdm_high, ofdm_low, cck_high, cck_low; /* get listen time since last call and add it to the counter because we @@ -483,9 +493,9 @@ ath5k_ani_calibration(struct ath5k_hw *ah) ofdm_low = as->listen_time * ATH5K_ANI_OFDM_TRIG_LOW / 1000; cck_low = as->listen_time * ATH5K_ANI_CCK_TRIG_LOW / 1000; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "listen %d (now %d)", as->listen_time, listen); - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "check high ofdm %d/%d cck %d/%d", as->ofdm_errors, ofdm_high, as->cck_errors, cck_high); @@ -493,27 +503,30 @@ ath5k_ani_calibration(struct ath5k_hw *ah) /* too many PHY errors - we have to raise immunity */ bool ofdm_flag = as->ofdm_errors > ofdm_high ? true : false; ath5k_ani_raise_immunity(ah, as, ofdm_flag); - ath5k_ani_period_restart(ah, as); + ath5k_ani_period_restart(as); } else if (as->listen_time > 5 * ATH5K_ANI_LISTEN_PERIOD) { /* If more than 5 (TODO: why 5?) periods have passed and we got * relatively little errors we can try to lower immunity */ - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "check low ofdm %d/%d cck %d/%d", as->ofdm_errors, ofdm_low, as->cck_errors, cck_low); if (as->ofdm_errors <= ofdm_low && as->cck_errors <= cck_low) ath5k_ani_lower_immunity(ah, as); - ath5k_ani_period_restart(ah, as); + ath5k_ani_period_restart(as); } } -/*** INTERRUPT HANDLER ***/ +/*******************\ +* Interrupt handler * +\*******************/ /** * ath5k_ani_mib_intr() - Interrupt handler for ANI MIB counters + * @ah: The &struct ath5k_hw * * Just read & reset the registers quickly, so they don't generate more * interrupts, save the counters and schedule the tasklet to decide whether @@ -525,7 +538,7 @@ ath5k_ani_calibration(struct ath5k_hw *ah) void ath5k_ani_mib_intr(struct ath5k_hw *ah) { - struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + struct ath5k_ani_state *as = &ah->ani_state; /* nothing to do here if HW does not have PHY error counters - they * can't be the reason for the MIB interrupt then */ @@ -536,7 +549,7 @@ ath5k_ani_mib_intr(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT); ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); - if (ah->ah_sc->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO) + if (ah->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO) return; /* If one of the errors triggered, we can get a superfluous second @@ -547,12 +560,14 @@ ath5k_ani_mib_intr(struct ath5k_hw *ah) if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH || as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH) - tasklet_schedule(&ah->ah_sc->ani_tasklet); + tasklet_schedule(&ah->ani_tasklet); } - /** - * ath5k_ani_phy_error_report() - Used by older HW to report PHY errors + * ath5k_ani_phy_error_report - Used by older HW to report PHY errors + * + * @ah: The &struct ath5k_hw + * @phyerr: One of enum ath5k_phy_error_code * * This is used by hardware without PHY error counters to report PHY errors * on a frame-by-frame basis, instead of the interrupt. @@ -561,24 +576,27 @@ void ath5k_ani_phy_error_report(struct ath5k_hw *ah, enum ath5k_phy_error_code phyerr) { - struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + struct ath5k_ani_state *as = &ah->ani_state; if (phyerr == AR5K_RX_PHY_ERROR_OFDM_TIMING) { as->ofdm_errors++; if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH) - tasklet_schedule(&ah->ah_sc->ani_tasklet); + tasklet_schedule(&ah->ani_tasklet); } else if (phyerr == AR5K_RX_PHY_ERROR_CCK_TIMING) { as->cck_errors++; if (as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH) - tasklet_schedule(&ah->ah_sc->ani_tasklet); + tasklet_schedule(&ah->ani_tasklet); } } -/*** INIT ***/ +/****************\ +* Initialization * +\****************/ /** * ath5k_enable_phy_err_counters() - Enable PHY error counters + * @ah: The &struct ath5k_hw * * Enable PHY error counters for OFDM and CCK timing errors. */ @@ -597,9 +615,9 @@ ath5k_enable_phy_err_counters(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); } - /** * ath5k_disable_phy_err_counters() - Disable PHY error counters + * @ah: The &struct ath5k_hw * * Disable PHY error counters for OFDM and CCK timing errors. */ @@ -616,10 +634,10 @@ ath5k_disable_phy_err_counters(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); } - /** * ath5k_ani_init() - Initialize ANI - * @mode: Which mode to use (auto, manual high, manual low, off) + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_ani_mode * * Initialize ANI according to mode. */ @@ -630,20 +648,25 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) if (ah->ah_version < AR5K_AR5212) return; + if (mode < ATH5K_ANI_MODE_OFF || mode > ATH5K_ANI_MODE_AUTO) { + ATH5K_ERR(ah, "ANI mode %d out of range", mode); + return; + } + /* clear old state information */ - memset(&ah->ah_sc->ani_state, 0, sizeof(ah->ah_sc->ani_state)); + memset(&ah->ani_state, 0, sizeof(ah->ani_state)); /* older hardware has more spur levels than newer */ if (ah->ah_mac_srev < AR5K_SREV_AR2414) - ah->ah_sc->ani_state.max_spur_level = 7; + ah->ani_state.max_spur_level = 7; else - ah->ah_sc->ani_state.max_spur_level = 2; + ah->ani_state.max_spur_level = 2; /* initial values for our ani parameters */ if (mode == ATH5K_ANI_MODE_OFF) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI off\n"); - } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI off\n"); + } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI manual low -> high sensitivity\n"); ath5k_ani_set_noise_immunity_level(ah, 0); ath5k_ani_set_spur_immunity_level(ah, 0); @@ -651,17 +674,17 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) ath5k_ani_set_ofdm_weak_signal_detection(ah, true); ath5k_ani_set_cck_weak_signal_detection(ah, true); } else if (mode == ATH5K_ANI_MODE_MANUAL_HIGH) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI manual high -> low sensitivity\n"); ath5k_ani_set_noise_immunity_level(ah, ATH5K_ANI_MAX_NOISE_IMM_LVL); ath5k_ani_set_spur_immunity_level(ah, - ah->ah_sc->ani_state.max_spur_level); + ah->ani_state.max_spur_level); ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL); ath5k_ani_set_ofdm_weak_signal_detection(ah, false); ath5k_ani_set_cck_weak_signal_detection(ah, false); } else if (mode == ATH5K_ANI_MODE_AUTO) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI auto\n"); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI auto\n"); ath5k_ani_set_noise_immunity_level(ah, 0); ath5k_ani_set_spur_immunity_level(ah, 0); ath5k_ani_set_firstep_level(ah, 0); @@ -687,45 +710,45 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) ~AR5K_RX_FILTER_PHYERR); } - ah->ah_sc->ani_state.ani_mode = mode; + ah->ani_state.ani_mode = mode; } -/*** DEBUG ***/ +/**************\ +* Debug output * +\**************/ #ifdef CONFIG_ATH5K_DEBUG +/** + * ath5k_ani_print_counters() - Print ANI counters + * @ah: The &struct ath5k_hw + * + * Used for debugging ANI + */ void ath5k_ani_print_counters(struct ath5k_hw *ah) { /* clears too */ - printk(KERN_NOTICE "ACK fail\t%d\n", - ath5k_hw_reg_read(ah, AR5K_ACK_FAIL)); - printk(KERN_NOTICE "RTS fail\t%d\n", - ath5k_hw_reg_read(ah, AR5K_RTS_FAIL)); - printk(KERN_NOTICE "RTS success\t%d\n", - ath5k_hw_reg_read(ah, AR5K_RTS_OK)); - printk(KERN_NOTICE "FCS error\t%d\n", - ath5k_hw_reg_read(ah, AR5K_FCS_FAIL)); + pr_notice("ACK fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_ACK_FAIL)); + pr_notice("RTS fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_FAIL)); + pr_notice("RTS success\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_OK)); + pr_notice("FCS error\t%d\n", ath5k_hw_reg_read(ah, AR5K_FCS_FAIL)); /* no clear */ - printk(KERN_NOTICE "tx\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX)); - printk(KERN_NOTICE "rx\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX)); - printk(KERN_NOTICE "busy\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR)); - printk(KERN_NOTICE "cycles\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE)); - - printk(KERN_NOTICE "AR5K_PHYERR_CNT1\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)); - printk(KERN_NOTICE "AR5K_PHYERR_CNT2\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)); - printk(KERN_NOTICE "AR5K_OFDM_FIL_CNT\t%d\n", - ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT)); - printk(KERN_NOTICE "AR5K_CCK_FIL_CNT\t%d\n", - ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT)); + pr_notice("tx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX)); + pr_notice("rx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX)); + pr_notice("busy\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR)); + pr_notice("cycles\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE)); + + pr_notice("AR5K_PHYERR_CNT1\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)); + pr_notice("AR5K_PHYERR_CNT2\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)); + pr_notice("AR5K_OFDM_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT)); + pr_notice("AR5K_CCK_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT)); } #endif diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h index d0a664039c8..21aa355460b 100644 --- a/drivers/net/wireless/ath/ath5k/ani.h +++ b/drivers/net/wireless/ath/ath5k/ani.h @@ -16,6 +16,10 @@ #ifndef ANI_H #define ANI_H +#include "../ath.h" + +enum ath5k_phy_error_code; + /* these thresholds are relative to the ATH5K_ANI_LISTEN_PERIOD */ #define ATH5K_ANI_LISTEN_PERIOD 100 #define ATH5K_ANI_OFDM_TRIG_HIGH 500 @@ -27,7 +31,7 @@ #define ATH5K_ANI_RSSI_THR_HIGH 40 #define ATH5K_ANI_RSSI_THR_LOW 7 -/* maximum availabe levels */ +/* maximum available levels */ #define ATH5K_ANI_MAX_FIRSTEP_LVL 2 #define ATH5K_ANI_MAX_NOISE_IMM_LVL 1 @@ -36,13 +40,13 @@ * enum ath5k_ani_mode - mode for ANI / noise sensitivity * * @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI - * algorithm after it has been on auto mode. - * ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low, - * maximizing sensitivity. ANI will not run. - * ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high, - * minimizing sensitivity. ANI will not run. - * ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the - * amount of OFDM and CCK frame errors (default). + * algorithm after it has been on auto mode. + * @ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low, + * maximizing sensitivity. ANI will not run. + * @ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high, + * minimizing sensitivity. ANI will not run. + * @ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the + * amount of OFDM and CCK frame errors (default). */ enum ath5k_ani_mode { ATH5K_ANI_MODE_OFF = 0, @@ -54,8 +58,22 @@ enum ath5k_ani_mode { /** * struct ath5k_ani_state - ANI state and associated counters - * - * @max_spur_level: the maximum spur level is chip dependent + * @ani_mode: One of enum ath5k_ani_mode + * @noise_imm_level: Noise immunity level + * @spur_level: Spur immunity level + * @firstep_level: FIRstep level + * @ofdm_weak_sig: OFDM weak signal detection state (on/off) + * @cck_weak_sig: CCK weak signal detection state (on/off) + * @max_spur_level: Max spur immunity level (chip specific) + * @listen_time: Listen time + * @ofdm_errors: OFDM timing error count + * @cck_errors: CCK timing error count + * @last_cc: The &struct ath_cycle_counters (for stats) + * @last_listen: Listen time from previous run (for stats) + * @last_ofdm_errors: OFDM timing error count from previous run (for tats) + * @last_cck_errors: CCK timing error count from previous run (for stats) + * @sum_ofdm_errors: Sum of OFDM timing errors (for stats) + * @sum_cck_errors: Sum of all CCK timing errors (for stats) */ struct ath5k_ani_state { enum ath5k_ani_mode ani_mode; diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 2718136e488..74bd54d6ace 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -18,15 +18,18 @@ #ifndef _ATH5K_H #define _ATH5K_H -/* TODO: Clean up channel debuging -doesn't work anyway- and start +/* TODO: Clean up channel debugging (doesn't work anyway) and start * working on reg. control code using all available eeprom information - * -rev. engineering needed- */ + * (rev. engineering needed) */ #define CHAN_DEBUG 0 #include <linux/io.h> +#include <linux/interrupt.h> #include <linux/types.h> #include <linux/average.h> +#include <linux/leds.h> #include <net/mac80211.h> +#include <net/cfg80211.h> /* RX/TX descriptor hw structs * TODO: Driver part should only see sw structs */ @@ -36,61 +39,67 @@ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) * and clean up common bits, then introduce set/get functions in eeprom.c */ #include "eeprom.h" +#include "debug.h" #include "../ath.h" +#include "ani.h" /* PCI IDs */ -#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ -#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ -#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ -#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ -#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ -#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ +#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ +#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ +#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ +#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ +#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ -#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ -#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ -#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ -#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ +#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ +#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ +#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ +#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ /****************************\ GENERIC DRIVER DEFINITIONS \****************************/ -#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) +#define ATH5K_PRINTF(fmt, ...) \ + pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) -#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ - printk(_level "ath5k %s: " _fmt, \ - ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ - ##__VA_ARGS__) +void __printf(3, 4) +_ath5k_printk(const struct ath5k_hw *ah, const char *level, + const char *fmt, ...); -#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ - if (net_ratelimit()) \ - ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ - } while (0) +#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ + _ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__) -#define ATH5K_INFO(_sc, _fmt, ...) \ +#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \ +do { \ + if (net_ratelimit()) \ + ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ +} while (0) + +#define ATH5K_INFO(_sc, _fmt, ...) \ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) -#define ATH5K_WARN(_sc, _fmt, ...) \ +#define ATH5K_WARN(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) -#define ATH5K_ERR(_sc, _fmt, ...) \ +#define ATH5K_ERR(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) /* @@ -126,13 +135,6 @@ #define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) -/* Access to PHY registers */ -#define AR5K_PHY_READ(ah, _reg) \ - ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_PHY_WRITE(ah, _reg, _val) \ - ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) - /* Access QCU registers per queue */ #define AR5K_REG_READ_Q(ah, _reg, _queue) \ (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ @@ -154,27 +156,13 @@ udelay(1); \ } while (0) -/* Register dumps are done per operation mode */ -#define AR5K_INI_RFGAIN_5GHZ 0 -#define AR5K_INI_RFGAIN_2GHZ 1 - -/* TODO: Clean this up */ -#define AR5K_INI_VAL_11A 0 -#define AR5K_INI_VAL_11A_TURBO 1 -#define AR5K_INI_VAL_11B 2 -#define AR5K_INI_VAL_11G 3 -#define AR5K_INI_VAL_11G_TURBO 4 -#define AR5K_INI_VAL_XR 0 -#define AR5K_INI_VAL_MAX 5 - /* - * Some tuneable values (these should be changeable by the user) + * Some tunable values (these should be changeable by the user) * TODO: Make use of them and add more options OR use debug/configfs */ #define AR5K_TUNE_DMA_BEACON_RESP 2 #define AR5K_TUNE_SW_BEACON_RESP 10 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 -#define AR5K_TUNE_RADAR_ALERT false #define AR5K_TUNE_MIN_TX_FIFO_THRES 1 #define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) #define AR5K_TUNE_REGISTER_TIMEOUT 20000 @@ -183,8 +171,8 @@ #define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it - * the BMISS_THRES will be seen as 0, seems harware doesn't keep - * track of it. Max value depends on harware. For AR5210 this is just 7. + * the BMISS_THRES will be seen as 0, seems hardware doesn't keep + * track of it. Max value depends on hardware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ #define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 @@ -203,10 +191,9 @@ #define AR5K_TUNE_MAX_TXPOWER 63 #define AR5K_TUNE_DEFAULT_TXPOWER 25 #define AR5K_TUNE_TPC_TXPOWER false -#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 10000 /* 10 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ #define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ -#define ATH5K_TUNE_CALIBRATION_INTERVAL_NF 60000 /* 60 sec */ - #define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ #define AR5K_INIT_CARR_SENSE_EN 1 @@ -222,54 +209,90 @@ /* Initial values */ #define AR5K_INIT_CYCRSSI_THR1 2 -#define AR5K_INIT_TX_LATENCY 502 -#define AR5K_INIT_USEC 39 -#define AR5K_INIT_USEC_TURBO 79 -#define AR5K_INIT_USEC_32 31 -#define AR5K_INIT_SLOT_TIME 396 -#define AR5K_INIT_SLOT_TIME_TURBO 480 -#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 -#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 -#define AR5K_INIT_PROG_IFS 920 -#define AR5K_INIT_PROG_IFS_TURBO 960 -#define AR5K_INIT_EIFS 3440 -#define AR5K_INIT_EIFS_TURBO 6880 -#define AR5K_INIT_SIFS 560 -#define AR5K_INIT_SIFS_TURBO 480 -#define AR5K_INIT_SH_RETRY 10 -#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY -#define AR5K_INIT_SSH_RETRY 32 -#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY -#define AR5K_INIT_TX_RETRY 10 - -#define AR5K_INIT_TRANSMIT_LATENCY ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC) \ -) -#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC_TURBO) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ - (AR5K_INIT_PROG_IFS) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ - (AR5K_INIT_PROG_IFS_TURBO) \ -) - -/* GENERIC CHIPSET DEFINITIONS */ +/* Tx retry limit defaults from standard */ +#define AR5K_INIT_RETRY_SHORT 7 +#define AR5K_INIT_RETRY_LONG 4 + +/* Slot time */ +#define AR5K_INIT_SLOT_TIME_TURBO 6 +#define AR5K_INIT_SLOT_TIME_DEFAULT 9 +#define AR5K_INIT_SLOT_TIME_HALF_RATE 13 +#define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21 +#define AR5K_INIT_SLOT_TIME_B 20 +#define AR5K_SLOT_TIME_MAX 0xffff + +/* SIFS */ +#define AR5K_INIT_SIFS_TURBO 6 +#define AR5K_INIT_SIFS_DEFAULT_BG 10 +#define AR5K_INIT_SIFS_DEFAULT_A 16 +#define AR5K_INIT_SIFS_HALF_RATE 32 +#define AR5K_INIT_SIFS_QUARTER_RATE 64 + +/* Used to calculate tx time for non 5/10/40MHz + * operation */ +/* It's preamble time + signal time (16 + 4) */ +#define AR5K_INIT_OFDM_PREAMPLE_TIME 20 +/* Preamble time for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14 +#define AR5K_INIT_OFDM_SYMBOL_TIME 4 +#define AR5K_INIT_OFDM_PLCP_BITS 22 + +/* Rx latency for 5 and 10MHz operation (max ?) */ +#define AR5K_INIT_RX_LAT_MAX 63 +/* Tx latencies from initvals (5212 only but no problem + * because we only tweak them on 5212) */ +#define AR5K_INIT_TX_LAT_A 54 +#define AR5K_INIT_TX_LAT_BG 384 +/* Tx latency for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_TX_LAT_MIN 32 +/* Default Tx/Rx latencies (same for 5211)*/ +#define AR5K_INIT_TX_LATENCY_5210 54 +#define AR5K_INIT_RX_LATENCY_5210 29 + +/* Tx frame to Tx data start delay */ +#define AR5K_INIT_TXF2TXD_START_DEFAULT 14 +#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 +#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 + +/* We need to increase PHY switch and agc settling time + * on turbo mode */ +#define AR5K_SWITCH_SETTLING 5760 +#define AR5K_SWITCH_SETTLING_TURBO 7168 + +#define AR5K_AGC_SETTLING 28 +/* 38 on 5210 but shouldn't matter */ +#define AR5K_AGC_SETTLING_TURBO 37 + + + +/*****************************\ +* GENERIC CHIPSET DEFINITIONS * +\*****************************/ -/* MAC Chips */ +/** + * enum ath5k_version - MAC Chips + * @AR5K_AR5210: AR5210 (Crete) + * @AR5K_AR5211: AR5211 (Oahu/Maui) + * @AR5K_AR5212: AR5212 (Venice) and newer + */ enum ath5k_version { AR5K_AR5210 = 0, AR5K_AR5211 = 1, AR5K_AR5212 = 2, }; -/* PHY Chips */ +/** + * enum ath5k_radio - PHY Chips + * @AR5K_RF5110: RF5110 (Fez) + * @AR5K_RF5111: RF5111 (Sombrero) + * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) + * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) + * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) + * @AR5K_RF2316: RF2315/2316 (Cobra SoC) + * @AR5K_RF2317: RF2317 (Spider SoC) + * @AR5K_RF2425: RF2425/2417 (Swan/Nalla) + */ enum ath5k_radio { AR5K_RF5110 = 0, AR5K_RF5111 = 1, @@ -285,17 +308,6 @@ enum ath5k_radio { * Common silicon revision/version values */ -enum ath5k_srev_type { - AR5K_VERSION_MAC, - AR5K_VERSION_RAD, -}; - -struct ath5k_srev_name { - const char *sr_name; - enum ath5k_srev_type sr_type; - u_int sr_val; -}; - #define AR5K_SREV_UNKNOWN 0xffff #define AR5K_SREV_AR5210 0x00 /* Crete */ @@ -304,12 +316,19 @@ struct ath5k_srev_name { #define AR5K_SREV_AR5311B 0x30 /* Spirit */ #define AR5K_SREV_AR5211 0x40 /* Oahu */ #define AR5K_SREV_AR5212 0x50 /* Venice */ +#define AR5K_SREV_AR5312_R2 0x52 /* AP31 */ #define AR5K_SREV_AR5212_V4 0x54 /* ??? */ #define AR5K_SREV_AR5213 0x55 /* ??? */ +#define AR5K_SREV_AR5312_R7 0x57 /* AP30 */ +#define AR5K_SREV_AR2313_R8 0x58 /* AP43 */ #define AR5K_SREV_AR5213A 0x59 /* Hainan */ #define AR5K_SREV_AR2413 0x78 /* Griffin lite */ #define AR5K_SREV_AR2414 0x70 /* Griffin */ +#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ +#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ #define AR5K_SREV_AR5424 0x90 /* Condor */ +#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ +#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ #define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ #define AR5K_SREV_AR5414 0xa0 /* Eagle */ #define AR5K_SREV_AR2415 0xb0 /* Talon */ @@ -346,32 +365,40 @@ struct ath5k_srev_name { /* TODO add support to mac80211 for vendor-specific rates and modes */ -/* +/** + * DOC: Atheros XR + * * Some of this information is based on Documentation from: * - * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG * - * Modulation for Atheros' eXtended Range - range enhancing extension that is - * supposed to double the distance an Atheros client device can keep a - * connection with an Atheros access point. This is achieved by increasing - * the receiver sensitivity up to, -105dBm, which is about 20dB above what - * the 802.11 specifications demand. In addition, new (proprietary) data rates - * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. + * Atheros' eXtended Range - range enhancing extension is a modulation scheme + * that is supposed to double the link distance between an Atheros XR-enabled + * client device with an Atheros XR-enabled access point. This is achieved + * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB + * above what the 802.11 specifications demand. In addition, new (proprietary) + * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. * * Please note that can you either use XR or TURBO but you cannot use both, * they are exclusive. * + * Also note that we do not plan to support XR mode at least for now. You can + * get a mode similar to XR by using 5MHz bwmode. */ -#define MODULATION_XR 0x00000200 -/* - * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a - * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s - * signaling rate achieved through the bonding of two 54Mbit/s 802.11g - * channels. To use this feature your Access Point must also suport it. + + +/** + * DOC: Atheros SuperAG + * + * In addition to XR we have another modulation scheme called TURBO mode + * that is supposed to provide a throughput transmission speed up to 40Mbit/s + * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two + * 54Mbit/s 802.11g channels. To use this feature both ends must support it. * There is also a distinction between "static" and "dynamic" turbo modes: * * - Static: is the dumb version: devices set to this mode stick to it until * the mode is turned off. + * * - Dynamic: is the intelligent version, the network decides itself if it * is ok to use turbo. As soon as traffic is detected on adjacent channels * (which would get used in turbo mode), or when a non-turbo station joins @@ -385,63 +412,113 @@ struct ath5k_srev_name { * * http://www.pcworld.com/article/id,113428-page,1/article.html * - * The channel bonding seems to be driver specific though. In addition to - * deciding what channels will be used, these "Turbo" modes are accomplished - * by also enabling the following features: + * The channel bonding seems to be driver specific though. + * + * In addition to TURBO modes we also have the following features for even + * greater speed-up: * * - Bursting: allows multiple frames to be sent at once, rather than pausing * after each frame. Bursting is a standards-compliant feature that can be * used with any Access Point. + * * - Fast frames: increases the amount of information that can be sent per * frame, also resulting in a reduction of transmission overhead. It is a * proprietary feature that needs to be supported by the Access Point. + * * - Compression: data frames are compressed in real time using a Lempel Ziv * algorithm. This is done transparently. Once this feature is enabled, * compression and decompression takes place inside the chipset, without * putting additional load on the host CPU. * + * As with XR we also don't plan to support SuperAG features for now. You can + * get a mode similar to TURBO by using 40MHz bwmode. */ -#define MODULATION_TURBO 0x00000080 + +/** + * enum ath5k_driver_mode - PHY operation mode + * @AR5K_MODE_11A: 802.11a + * @AR5K_MODE_11B: 802.11b + * @AR5K_MODE_11G: 801.11g + * @AR5K_MODE_MAX: Used for boundary checks + * + * Do not change the order here, we use these as + * array indices and it also maps EEPROM structures. + */ enum ath5k_driver_mode { AR5K_MODE_11A = 0, - AR5K_MODE_11A_TURBO = 1, - AR5K_MODE_11B = 2, - AR5K_MODE_11G = 3, - AR5K_MODE_11G_TURBO = 4, - AR5K_MODE_XR = 0, - AR5K_MODE_MAX = 5 + AR5K_MODE_11B = 1, + AR5K_MODE_11G = 2, + AR5K_MODE_MAX = 3 }; +/** + * enum ath5k_ant_mode - Antenna operation mode + * @AR5K_ANTMODE_DEFAULT: Default antenna setup + * @AR5K_ANTMODE_FIXED_A: Only antenna A is present + * @AR5K_ANTMODE_FIXED_B: Only antenna B is present + * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap + * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc + * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc + * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- + * @AR5K_ANTMODE_MAX: Used for boundary checks + * + * For more infos on antenna control check out phy.c + */ enum ath5k_ant_mode { - AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */ - AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */ - AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */ - AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */ - AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */ - AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */ - AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */ + AR5K_ANTMODE_DEFAULT = 0, + AR5K_ANTMODE_FIXED_A = 1, + AR5K_ANTMODE_FIXED_B = 2, + AR5K_ANTMODE_SINGLE_AP = 3, + AR5K_ANTMODE_SECTOR_AP = 4, + AR5K_ANTMODE_SECTOR_STA = 5, + AR5K_ANTMODE_DEBUG = 6, AR5K_ANTMODE_MAX, }; +/** + * enum ath5k_bw_mode - Bandwidth operation mode + * @AR5K_BWMODE_DEFAULT: 20MHz, default operation + * @AR5K_BWMODE_5MHZ: Quarter rate + * @AR5K_BWMODE_10MHZ: Half rate + * @AR5K_BWMODE_40MHZ: Turbo + */ +enum ath5k_bw_mode { + AR5K_BWMODE_DEFAULT = 0, + AR5K_BWMODE_5MHZ = 1, + AR5K_BWMODE_10MHZ = 2, + AR5K_BWMODE_40MHZ = 3 +}; + + /****************\ TX DEFINITIONS \****************/ -/* - * TX Status descriptor +/** + * struct ath5k_tx_status - TX Status descriptor + * @ts_seqnum: Sequence number + * @ts_tstamp: Timestamp + * @ts_status: Status code + * @ts_final_idx: Final transmission series index + * @ts_final_retry: Final retry count + * @ts_rssi: RSSI for received ACK + * @ts_shortretry: Short retry count + * @ts_virtcol: Virtual collision count + * @ts_antenna: Antenna used + * + * TX status descriptor gets filled by the hw + * on each transmission attempt. */ struct ath5k_tx_status { u16 ts_seqnum; u16 ts_tstamp; u8 ts_status; - u8 ts_rate[4]; - u8 ts_retry[4]; u8 ts_final_idx; + u8 ts_final_retry; s8 ts_rssi; u8 ts_shortretry; - u8 ts_longretry; u8 ts_virtcol; u8 ts_antenna; }; @@ -455,7 +532,6 @@ struct ath5k_tx_status { * enum ath5k_tx_queue - Queue types used to classify tx queues. * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue * @AR5K_TX_QUEUE_DATA: A normal data queue - * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue * @AR5K_TX_QUEUE_BEACON: The beacon queue * @AR5K_TX_QUEUE_CAB: The after-beacon queue * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue @@ -463,7 +539,6 @@ struct ath5k_tx_status { enum ath5k_tx_queue { AR5K_TX_QUEUE_INACTIVE = 0, AR5K_TX_QUEUE_DATA, - AR5K_TX_QUEUE_XR_DATA, AR5K_TX_QUEUE_BEACON, AR5K_TX_QUEUE_CAB, AR5K_TX_QUEUE_UAPSD, @@ -472,36 +547,46 @@ enum ath5k_tx_queue { #define AR5K_NUM_TX_QUEUES 10 #define AR5K_NUM_TX_QUEUES_NOQCU 2 -/* - * Queue syb-types to classify normal data queues. +/** + * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues + * @AR5K_WME_AC_BK: Background traffic + * @AR5K_WME_AC_BE: Best-effort (normal) traffic + * @AR5K_WME_AC_VI: Video traffic + * @AR5K_WME_AC_VO: Voice traffic + * * These are the 4 Access Categories as defined in * WME spec. 0 is the lowest priority and 4 is the * highest. Normal data that hasn't been classified * goes to the Best Effort AC. */ enum ath5k_tx_queue_subtype { - AR5K_WME_AC_BK = 0, /*Background traffic*/ - AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ - AR5K_WME_AC_VI, /*Video traffic*/ - AR5K_WME_AC_VO, /*Voice traffic*/ + AR5K_WME_AC_BK = 0, + AR5K_WME_AC_BE, + AR5K_WME_AC_VI, + AR5K_WME_AC_VO, }; -/* - * Queue ID numbers as returned by the hw functions, each number - * represents a hw queue. If hw does not support hw queues - * (eg 5210) all data goes in one queue. These match - * d80211 definitions (net80211/MadWiFi don't use them). +/** + * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions + * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index + * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index + * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue + * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue + * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, + * + * Each number represents a hw queue. If hw does not support hw queues + * (eg 5210) all data goes in one queue. */ enum ath5k_tx_queue_id { AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, - AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ - AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ - AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ - AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ - AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ - AR5K_TX_QUEUE_ID_UAPSD = 8, - AR5K_TX_QUEUE_ID_XR_DATA = 9, + AR5K_TX_QUEUE_ID_DATA_MIN = 0, + AR5K_TX_QUEUE_ID_DATA_MAX = 3, + AR5K_TX_QUEUE_ID_UAPSD = 7, + AR5K_TX_QUEUE_ID_CAB = 8, + AR5K_TX_QUEUE_ID_BEACON = 9, }; /* @@ -522,25 +607,70 @@ enum ath5k_tx_queue_id { #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ -/* - * A struct to hold tx queue's parameters +/** + * struct ath5k_txq - Transmit queue state + * @qnum: Hardware q number + * @link: Link ptr in last TX desc + * @q: Transmit queue (&struct list_head) + * @lock: Lock on q and link + * @setup: Is the queue configured + * @txq_len:Number of queued buffers + * @txq_max: Max allowed num of queued buffers + * @txq_poll_mark: Used to check if queue got stuck + * @txq_stuck: Queue stuck counter + * + * One of these exists for each hardware transmit queue. + * Packets sent to us from above are assigned to queues based + * on their priority. Not all devices support a complete set + * of hardware transmit queues. For those devices the array + * sc_ac2q will map multiple priorities to fewer hardware queues + * (typically all to one hardware queue). + */ +struct ath5k_txq { + unsigned int qnum; + u32 *link; + struct list_head q; + spinlock_t lock; + bool setup; + int txq_len; + int txq_max; + bool txq_poll_mark; + unsigned int txq_stuck; +}; + +/** + * struct ath5k_txq_info - A struct to hold TX queue's parameters + * @tqi_type: One of enum ath5k_tx_queue + * @tqi_subtype: One of enum ath5k_tx_queue_subtype + * @tqi_flags: TX queue flags (see above) + * @tqi_aifs: Arbitrated Inter-frame Space + * @tqi_cw_min: Minimum Contention Window + * @tqi_cw_max: Maximum Contention Window + * @tqi_cbr_period: Constant bit rate period + * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled */ struct ath5k_txq_info { enum ath5k_tx_queue tqi_type; enum ath5k_tx_queue_subtype tqi_subtype; - u16 tqi_flags; /* Tx queue flags (see above) */ - u8 tqi_aifs; /* Arbitrated Interframe Space */ - u16 tqi_cw_min; /* Minimum Contention Window */ - u16 tqi_cw_max; /* Maximum Contention Window */ - u32 tqi_cbr_period; /* Constant bit rate period */ + u16 tqi_flags; + u8 tqi_aifs; + u16 tqi_cw_min; + u16 tqi_cw_max; + u32 tqi_cbr_period; u32 tqi_cbr_overflow_limit; u32 tqi_burst_time; - u32 tqi_ready_time; /* Time queue waits after an event */ + u32 tqi_ready_time; }; -/* - * Transmit packet types. - * used on tx control descriptor +/** + * enum ath5k_pkt_type - Transmit packet types + * @AR5K_PKT_TYPE_NORMAL: Normal data + * @AR5K_PKT_TYPE_ATIM: ATIM + * @AR5K_PKT_TYPE_PSPOLL: PS-Poll + * @AR5K_PKT_TYPE_BEACON: Beacon + * @AR5K_PKT_TYPE_PROBE_RESP: Probe response + * @AR5K_PKT_TYPE_PIFS: PIFS + * Used on tx control descriptor */ enum ath5k_pkt_type { AR5K_PKT_TYPE_NORMAL = 0, @@ -563,27 +693,23 @@ enum ath5k_pkt_type { (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ ) -/* - * DMA size definitions (2^(n+2)) - */ -enum ath5k_dmasize { - AR5K_DMASIZE_4B = 0, - AR5K_DMASIZE_8B, - AR5K_DMASIZE_16B, - AR5K_DMASIZE_32B, - AR5K_DMASIZE_64B, - AR5K_DMASIZE_128B, - AR5K_DMASIZE_256B, - AR5K_DMASIZE_512B -}; /****************\ RX DEFINITIONS \****************/ -/* - * RX Status descriptor +/** + * struct ath5k_rx_status - RX Status descriptor + * @rs_datalen: Data length + * @rs_tstamp: Timestamp + * @rs_status: Status code + * @rs_phyerr: PHY error mask + * @rs_rssi: RSSI in 0.5dbm units + * @rs_keyix: Index to the key used for decrypting + * @rs_rate: Rate used to decode the frame + * @rs_antenna: Antenna used to receive the frame + * @rs_more: Indicates this is a frame fragment (Fast frames) */ struct ath5k_rx_status { u16 rs_datalen; @@ -602,8 +728,8 @@ struct ath5k_rx_status { #define AR5K_RXERR_FIFO 0x04 #define AR5K_RXERR_DECRYPT 0x08 #define AR5K_RXERR_MIC 0x10 -#define AR5K_RXKEYIX_INVALID ((u8) - 1) -#define AR5K_TXKEYIX_INVALID ((u32) - 1) +#define AR5K_RXKEYIX_INVALID ((u8) -1) +#define AR5K_TXKEYIX_INVALID ((u32) -1) /**************************\ @@ -625,10 +751,18 @@ struct ath5k_rx_status { #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) + /*******************************\ GAIN OPTIMIZATION DEFINITIONS \*******************************/ +/** + * enum ath5k_rfgain - RF Gain optimization engine state + * @AR5K_RFGAIN_INACTIVE: Engine disabled + * @AR5K_RFGAIN_ACTIVE: Probe active + * @AR5K_RFGAIN_READ_REQUESTED: Probe requested + * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change + */ enum ath5k_rfgain { AR5K_RFGAIN_INACTIVE = 0, AR5K_RFGAIN_ACTIVE, @@ -636,6 +770,16 @@ enum ath5k_rfgain { AR5K_RFGAIN_NEED_CHANGE, }; +/** + * struct ath5k_gain - RF Gain optimization engine state data + * @g_step_idx: Current step index + * @g_current: Current gain + * @g_target: Target gain + * @g_low: Low gain boundary + * @g_high: High gain boundary + * @g_f_corr: Gain_F correction + * @g_state: One of enum ath5k_rfgain + */ struct ath5k_gain { u8 g_step_idx; u8 g_current; @@ -646,6 +790,8 @@ struct ath5k_gain { u8 g_state; }; + + /********************\ COMMON DEFINITIONS \********************/ @@ -654,42 +800,14 @@ struct ath5k_gain { #define AR5K_SLOT_TIME_20 880 #define AR5K_SLOT_TIME_MAX 0xffff -/* channel_flags */ -#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ -#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ -#define CHANNEL_CCK 0x0020 /* CCK channel */ -#define CHANNEL_OFDM 0x0040 /* OFDM channel */ -#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ -#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ -#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ -#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ -#define CHANNEL_XR 0x0800 /* XR channel */ - -#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) -#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) -#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) -#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_108A CHANNEL_T -#define CHANNEL_108G CHANNEL_TG -#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) - -#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ - CHANNEL_TURBO) - -#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) -#define CHANNEL_MODES CHANNEL_ALL - -/* - * Used internaly for reset_tx_queue). - * Also see struct struct ieee80211_channel. - */ -#define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0) -#define IS_CHAN_B(_c) ((_c->hw_value & CHANNEL_B) != 0) - -/* - * The following structure is used to map 2GHz channels to - * 5GHz Atheros channels. +/** + * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 + * @a2_flags: Channel flags (internal) + * @a2_athchan: HW channel number (internal) + * + * This structure is used to map 2GHz channels to + * 5GHz Atheros channels on 2111 frequency converter + * that comes together with RF5111 * TODO: Clean up */ struct ath5k_athchan_2ghz { @@ -697,36 +815,80 @@ struct ath5k_athchan_2ghz { u16 a2_athchan; }; +/** + * enum ath5k_dmasize - DMA size definitions (2^(n+2)) + * @AR5K_DMASIZE_4B: 4Bytes + * @AR5K_DMASIZE_8B: 8Bytes + * @AR5K_DMASIZE_16B: 16Bytes + * @AR5K_DMASIZE_32B: 32Bytes + * @AR5K_DMASIZE_64B: 64Bytes (Default) + * @AR5K_DMASIZE_128B: 128Bytes + * @AR5K_DMASIZE_256B: 256Bytes + * @AR5K_DMASIZE_512B: 512Bytes + * + * These are used to set DMA burst size on hw + * + * Note: Some platforms can't handle more than 4Bytes + * be careful on embedded boards. + */ +enum ath5k_dmasize { + AR5K_DMASIZE_4B = 0, + AR5K_DMASIZE_8B, + AR5K_DMASIZE_16B, + AR5K_DMASIZE_32B, + AR5K_DMASIZE_64B, + AR5K_DMASIZE_128B, + AR5K_DMASIZE_256B, + AR5K_DMASIZE_512B +}; + + /******************\ RATE DEFINITIONS \******************/ /** - * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. + * DOC: Rate codes + * + * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. * * The rate code is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control * and settings. * - * This is the hardware rate map we are aware of: - * - * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 - * rate_kbps 3000 1000 ? ? ? 2000 500 48000 + * This is the hardware rate map we are aware of (html unfriendly): * - * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 - * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? + * Rate code Rate (Kbps) + * --------- ----------- + * 0x01 3000 (XR) + * 0x02 1000 (XR) + * 0x03 250 (XR) + * 0x04 - 05 -Reserved- + * 0x06 2000 (XR) + * 0x07 500 (XR) + * 0x08 48000 (OFDM) + * 0x09 24000 (OFDM) + * 0x0A 12000 (OFDM) + * 0x0B 6000 (OFDM) + * 0x0C 54000 (OFDM) + * 0x0D 36000 (OFDM) + * 0x0E 18000 (OFDM) + * 0x0F 9000 (OFDM) + * 0x10 - 17 -Reserved- + * 0x18 11000L (CCK) + * 0x19 5500L (CCK) + * 0x1A 2000L (CCK) + * 0x1B 1000L (CCK) + * 0x1C 11000S (CCK) + * 0x1D 5500S (CCK) + * 0x1E 2000S (CCK) + * 0x1F -Reserved- * - * rate_code 17 18 19 20 21 22 23 24 - * rate_kbps ? ? ? ? ? ? ? 11000 - * - * rate_code 25 26 27 28 29 30 31 32 - * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? - * - * "S" indicates CCK rates with short preamble. + * "S" indicates CCK rates with short preamble and "L" with long preamble. * * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the - * lowest 4 bits, so they are the same as below with a 0xF mask. + * lowest 4 bits, so they are the same as above with a 0xF mask. * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). * We handle this in ath5k_setup_bands(). */ @@ -746,13 +908,9 @@ struct ath5k_athchan_2ghz { #define ATH5K_RATE_CODE_36M 0x0D #define ATH5K_RATE_CODE_48M 0x08 #define ATH5K_RATE_CODE_54M 0x0C -/* XR */ -#define ATH5K_RATE_CODE_XR_500K 0x07 -#define ATH5K_RATE_CODE_XR_1M 0x02 -#define ATH5K_RATE_CODE_XR_2M 0x06 -#define ATH5K_RATE_CODE_XR_3M 0x01 -/* adding this flag to rate_code enables short preamble */ +/* Adding this flag to rate_code on B rates + * enables short preamble */ #define AR5K_SET_SHORT_PREAMBLE 0x04 /* @@ -760,6 +918,7 @@ struct ath5k_athchan_2ghz { */ #define AR5K_KEYCACHE_SIZE 8 +extern bool ath5k_modparam_nohwcrypt; /***********************\ HW RELATED DEFINITIONS @@ -768,11 +927,11 @@ struct ath5k_athchan_2ghz { /* * Misc definitions */ -#define AR5K_RSSI_EP_MULTIPLIER (1<<7) +#define AR5K_RSSI_EP_MULTIPLIER (1 << 7) #define AR5K_ASSERT_ENTRY(_e, _s) do { \ if (_e >= _s) \ - return (false); \ + return false; \ } while (0) /* @@ -781,54 +940,70 @@ struct ath5k_athchan_2ghz { /** * enum ath5k_int - Hardware interrupt masks helpers + * @AR5K_INT_RXOK: Frame successfully received + * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor + * @AR5K_INT_RXERR: Frame reception failed + * @AR5K_INT_RXNOFRM: No frame received within a specified time period + * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors + * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is + * not always fatal, on some chips we can continue operation + * without resetting the card, that's why %AR5K_INT_FATAL is not + * common for all chips. + * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts + * + * @AR5K_INT_TXOK: Frame transmission success + * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor + * @AR5K_INT_TXERR: Frame transmission failure + * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The + * Queue Control Unit (QCU) signals an EOL interrupt only if a + * descriptor's LinkPtr is NULL. For more details, refer to: + * "http://www.freepatentsonline.com/20030225739.html" + * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period + * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should + * increase the TX trigger threshold. + * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts * - * @AR5K_INT_RX: mask to identify received frame interrupts, of type - * AR5K_ISR_RXOK or AR5K_ISR_RXERR - * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) - * @AR5K_INT_RXNOFRM: No frame received (?) - * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The - * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's - * LinkPtr is NULL. For more details, refer to: - * http://www.freepatentsonline.com/20030225739.html - * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). - * Note that Rx overrun is not always fatal, on some chips we can continue - * operation without reseting the card, that's why int_fatal is not - * common for all chips. - * @AR5K_INT_TX: mask to identify received frame interrupts, of type - * AR5K_ISR_TXOK or AR5K_ISR_TXERR - * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) - * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold - * We currently do increments on interrupt by - * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or - * one of the PHY error counters reached the maximum value and should be - * read and cleared. + * one of the PHY error counters reached the maximum value and + * should be read and cleared. + * @AR5K_INT_SWI: Software triggered interrupt. * @AR5K_INT_RXPHY: RX PHY Error * @AR5K_INT_RXKCM: RX Key cache miss * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a - * beacon that must be handled in software. The alternative is if you - * have VEOL support, in that case you let the hardware deal with things. + * beacon that must be handled in software. The alternative is if + * you have VEOL support, in that case you let the hardware deal + * with things. + * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing - * beacons from the AP have associated with, we should probably try to - * reassociate. When in IBSS mode this might mean we have not received - * any beacons from any local stations. Note that every station in an - * IBSS schedules to send beacons at the Target Beacon Transmission Time - * (TBTT) with a random backoff. - * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? - * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now - * until properly handled - * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA - * errors. These types of errors we can enable seem to be of type - * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. + * beacons from the AP have associated with, we should probably + * try to reassociate. When in IBSS mode this might mean we have + * not received any beacons from any local stations. Note that + * every station in an IBSS schedules to send beacons at the + * Target Beacon Transmission Time (TBTT) with a random backoff. + * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. + * @AR5K_INT_TIM: Beacon with local station's TIM bit set + * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received + * @AR5K_INT_DTIM_SYNC: DTIM sync lost + * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to + * our GPIO pins. + * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting + * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got + * nothing or an incomplete CAB frame sequence. + * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired + * @AR5K_INT_QCBRURN: A queue got triggered wile empty + * @AR5K_INT_QTRIG: A queue got triggered + * + * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA + * errors. Indicates we need to reset the card. * @AR5K_INT_GLOBAL: Used to clear and set the IER - * @AR5K_INT_NOCARD: signals the card has been removed - * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same - * bit value + * @AR5K_INT_NOCARD: Signals the card has been removed + * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same + * bit value * * These are mapped to take advantage of some common bits * between the MACs, to be able to set intr properties * easier. Some of them are not used yet inside hw.c. Most map - * to the respective hw interrupt value as they are common amogst different + * to the respective hw interrupt value as they are common among different * MACs. */ enum ath5k_int { @@ -859,12 +1034,25 @@ enum ath5k_int { AR5K_INT_GPIO = 0x01000000, AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ - AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ - AR5K_INT_QCBRORN = 0x10000000, /* Non common */ - AR5K_INT_QCBRURN = 0x20000000, /* Non common */ - AR5K_INT_QTRIG = 0x40000000, /* Non common */ + AR5K_INT_QCBRORN = 0x08000000, /* Non common */ + AR5K_INT_QCBRURN = 0x10000000, /* Non common */ + AR5K_INT_QTRIG = 0x20000000, /* Non common */ AR5K_INT_GLOBAL = 0x80000000, + AR5K_INT_TX_ALL = AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN, + + AR5K_INT_RX_ALL = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN, + AR5K_INT_COMMON = AR5K_INT_RXOK | AR5K_INT_RXDESC | AR5K_INT_RXERR @@ -890,15 +1078,32 @@ enum ath5k_int { AR5K_INT_NOCARD = 0xffffffff }; -/* mask which calibration is active at the moment */ +/** + * enum ath5k_calibration_mask - Mask which calibration is active at the moment + * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) + * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) + * @AR5K_CALIBRATION_NF: Noise Floor calibration + * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity + */ enum ath5k_calibration_mask { AR5K_CALIBRATION_FULL = 0x01, AR5K_CALIBRATION_SHORT = 0x02, - AR5K_CALIBRATION_ANI = 0x04, + AR5K_CALIBRATION_NF = 0x04, + AR5K_CALIBRATION_ANI = 0x08, }; -/* - * Power management +/** + * enum ath5k_power_mode - Power management modes + * @AR5K_PM_UNDEFINED: Undefined + * @AR5K_PM_AUTO: Allow card to sleep if possible + * @AR5K_PM_AWAKE: Force card to wake up + * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) + * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration + * + * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO + * are also known to have problems on some cards. This is not a big + * problem though because we can have almost the same effect as + * FULL_SLEEP by putting card on warm reset (it's almost powered down). */ enum ath5k_power_mode { AR5K_PM_UNDEFINED = 0, @@ -924,41 +1129,12 @@ enum ath5k_power_mode { #define AR5K_SOFTLED_ON 0 #define AR5K_SOFTLED_OFF 1 -/* - * Chipset capabilities -see ath5k_hw_get_capability- - * get_capability function is not yet fully implemented - * in ath5k so most of these don't work yet... - * TODO: Implement these & merge with _TUNE_ stuff above - */ -enum ath5k_capability_type { - AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ - AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ - AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ - AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ - AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ - AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ - AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ - AR5K_CAP_COMPRESSION = 8, /* Supports compression */ - AR5K_CAP_BURST = 9, /* Supports packet bursting */ - AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ - AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ - AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ - AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ - AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ - AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ - AR5K_CAP_XR = 16, /* Supports XR mode */ - AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ - AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ - AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ - AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ -}; - /* XXX: we *may* move cap_range stuff to struct wiphy */ struct ath5k_capabilities { /* * Supported PHY modes - * (ie. CHANNEL_A, CHANNEL_B, ...) + * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...) */ DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); @@ -985,29 +1161,77 @@ struct ath5k_capabilities { } cap_queues; bool cap_has_phyerr_counters; + bool cap_has_mrr_support; + bool cap_needs_2GHz_ovr; }; /* size of noise floor history (keep it a power of two) */ #define ATH5K_NF_CAL_HIST_MAX 8 -struct ath5k_nfcal_hist -{ +struct ath5k_nfcal_hist { s16 index; /* current index into nfval */ s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ }; -/** - * struct avg_val - Helper structure for average calculation - * @avg: contains the actual average value - * @avg_weight: is used internally during calculation to prevent rounding errors +#define ATH5K_LED_MAX_NAME_LEN 31 + +/* + * State for LED triggers */ -struct ath5k_avg_val { - int avg; - int avg_weight; +struct ath5k_led { + char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ + struct ath5k_hw *ah; /* driver state */ + struct led_classdev led_dev; /* led classdev */ +}; + +/* Rfkill */ +struct ath5k_rfkill { + /* GPIO PIN for rfkill */ + u16 gpio; + /* polarity of rfkill GPIO PIN */ + bool polarity; + /* RFKILL toggle tasklet */ + struct tasklet_struct toggleq; }; -/***************************************\ - HARDWARE ABSTRACTION LAYER STRUCTURE -\***************************************/ +/* statistics */ +struct ath5k_statistics { + /* antenna use */ + unsigned int antenna_rx[5]; /* frames count per antenna RX */ + unsigned int antenna_tx[5]; /* frames count per antenna TX */ + + /* frame errors */ + unsigned int rx_all_count; /* all RX frames, including errors */ + unsigned int tx_all_count; /* all TX frames, including errors */ + unsigned int rx_bytes_count; /* all RX bytes, including errored pkts + * and the MAC headers for each packet + */ + unsigned int tx_bytes_count; /* all TX bytes, including errored pkts + * and the MAC headers and padding for + * each packet. + */ + unsigned int rxerr_crc; + unsigned int rxerr_phy; + unsigned int rxerr_phy_code[32]; + unsigned int rxerr_fifo; + unsigned int rxerr_decrypt; + unsigned int rxerr_mic; + unsigned int rxerr_proc; + unsigned int rxerr_jumbo; + unsigned int txerr_retry; + unsigned int txerr_fifo; + unsigned int txerr_filt; + + /* MIB counters */ + unsigned int ack_fail; + unsigned int rts_fail; + unsigned int rts_ok; + unsigned int fcs_error; + unsigned int beacons; + + unsigned int mib_intr; + unsigned int rxorn_intr; + unsigned int rxeol_intr; +}; /* * Misc defines @@ -1016,23 +1240,118 @@ struct ath5k_avg_val { #define AR5K_MAX_GPIO 10 #define AR5K_MAX_RF_BANKS 8 -/* TODO: Clean up and merge with ath5k_softc */ +#if CHAN_DEBUG +#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) +#else +#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) +#endif + +#define ATH_RXBUF 40 /* number of RX buffers */ +#define ATH_TXBUF 200 /* number of TX buffers */ +#define ATH_BCBUF 4 /* number of beacon buffers */ +#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ +#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ + +/* Driver state associated with an instance of a device */ struct ath5k_hw { struct ath_common common; - struct ath5k_softc *ah_sc; - void __iomem *ah_iobase; + struct pci_dev *pdev; + struct device *dev; /* for dma mapping */ + int irq; + u16 devid; + void __iomem *iobase; /* address of the device */ + struct mutex lock; /* dev-level lock */ + struct ieee80211_hw *hw; /* IEEE 802.11 common */ + struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; + struct ieee80211_channel channels[ATH_CHAN_MAX]; + struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; + s8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; + enum nl80211_iftype opmode; + +#ifdef CONFIG_ATH5K_DEBUG + struct ath5k_dbg_info debug; /* debug info */ +#endif /* CONFIG_ATH5K_DEBUG */ + + struct ath5k_buf *bufptr; /* allocated buffer ptr */ + struct ath5k_desc *desc; /* TX/RX descriptors */ + dma_addr_t desc_daddr; /* DMA (physical) address */ + size_t desc_len; /* size of TX/RX descriptors */ + + DECLARE_BITMAP(status, 4); +#define ATH_STAT_INVALID 0 /* disable hardware accesses */ +#define ATH_STAT_PROMISC 1 +#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ +#define ATH_STAT_STARTED 3 /* opened & irqs enabled */ + + unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ + struct ieee80211_channel *curchan; /* current h/w channel */ + + u16 nvifs; + + enum ath5k_int imask; /* interrupt mask copy */ + + spinlock_t irqlock; + bool rx_pending; /* rx tasklet pending */ + bool tx_pending; /* tx tasklet pending */ + + u8 bssidmask[ETH_ALEN]; + + unsigned int led_pin, /* GPIO pin for driving LED */ + led_on; /* pin setting for LED on */ + + struct work_struct reset_work; /* deferred chip reset */ + struct work_struct calib_work; /* deferred phy calibration */ + + struct list_head rxbuf; /* receive buffer */ + spinlock_t rxbuflock; + u32 *rxlink; /* link ptr in last RX desc */ + struct tasklet_struct rxtq; /* rx intr tasklet */ + struct ath5k_led rx_led; /* rx led */ + + struct list_head txbuf; /* transmit buffer */ + spinlock_t txbuflock; + unsigned int txbuf_len; /* buf count in txbuf list */ + struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ + struct tasklet_struct txtq; /* tx intr tasklet */ + struct ath5k_led tx_led; /* tx led */ + + struct ath5k_rfkill rf_kill; + + spinlock_t block; /* protects beacon */ + struct tasklet_struct beacontq; /* beacon intr tasklet */ + struct list_head bcbuf; /* beacon buffer */ + struct ieee80211_vif *bslot[ATH_BCBUF]; + u16 num_ap_vifs; + u16 num_adhoc_vifs; + u16 num_mesh_vifs; + unsigned int bhalq, /* SW q for outgoing beacons */ + bmisscount, /* missed beacon transmits */ + bintval, /* beacon interval in TU */ + bsent; + unsigned int nexttbtt; /* next beacon time in TU */ + struct ath5k_txq *cabq; /* content after beacon */ + + bool assoc; /* associate state */ + bool enable_beacon; /* true if beacons are on */ + + struct ath5k_statistics stats; + + struct ath5k_ani_state ani_state; + struct tasklet_struct ani_tasklet; /* ANI calibration */ + + struct delayed_work tx_complete_work; + + struct survey_info survey; /* collected survey info */ enum ath5k_int ah_imr; struct ieee80211_channel *ah_current_channel; - bool ah_turbo; - bool ah_calibration; + bool ah_iq_cal_needed; bool ah_single_chip; enum ath5k_version ah_version; enum ath5k_radio ah_radio; - u32 ah_phy; u32 ah_mac_srev; u16 ah_mac_version; u16 ah_phy_revision; @@ -1042,15 +1361,21 @@ struct ath5k_hw { #define ah_modes ah_capabilities.cap_mode #define ah_ee_version ah_capabilities.cap_eeprom.ee_version - u32 ah_limit_tx_retries; + u8 ah_retry_long; + u8 ah_retry_short; + + u32 ah_use_32khz_clock; + u8 ah_coverage_class; + bool ah_ack_bitrate_high; + u8 ah_bwmode; + bool ah_short_slot; /* Antenna Control */ u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; u8 ah_ant_mode; u8 ah_tx_ant; u8 ah_def_ant; - bool ah_software_retry; struct ath5k_capabilities ah_capabilities; @@ -1065,7 +1390,13 @@ struct ath5k_hw { u32 ah_txq_imr_cbrurn; u32 ah_txq_imr_qtrig; u32 ah_txq_imr_nofrm; - u32 ah_txq_isr; + + u32 ah_txq_isr_txok_all; + u32 ah_txq_isr_txurn; + u32 ah_txq_isr_qcborn; + u32 ah_txq_isr_qcburn; + u32 ah_txq_isr_qtrig; + u32 *ah_rf_banks; size_t ah_rf_banks_size; size_t ah_rf_regs_count; @@ -1086,20 +1417,17 @@ struct ath5k_hw { /* Values in 0.25dB units */ s16 txp_min_pwr; s16 txp_max_pwr; + s16 txp_cur_pwr; /* Values in 0.5dB units */ s16 txp_offset; s16 txp_ofdm; s16 txp_cck_ofdm_gainf_delta; /* Value in dB units */ s16 txp_cck_ofdm_pwr_delta; + bool txp_setup; + int txp_requested; /* Requested tx power in dBm */ } ah_txpower; - struct { - bool r_enabled; - int r_last_alert; - struct ieee80211_channel r_last_channel; - } ah_radar; - struct ath5k_nfcal_hist ah_nfcal_hist; /* average beacon RSSI in our BSS (used by ANI) */ @@ -1110,8 +1438,8 @@ struct ath5k_hw { /* Calibration timestamp */ unsigned long ah_cal_next_full; + unsigned long ah_cal_next_short; unsigned long ah_cal_next_ani; - unsigned long ah_cal_next_nf; /* Calibration mask */ u8 ah_cal_mask; @@ -1129,39 +1457,57 @@ struct ath5k_hw { struct ath5k_rx_status *); }; +struct ath_bus_ops { + enum ath_bus_type ath_bus_type; + void (*read_cachesize)(struct ath_common *common, int *csz); + bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); + int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac); +}; + /* * Prototypes */ +extern const struct ieee80211_ops ath5k_hw_ops; + +/* Initialization and detach functions */ +int ath5k_hw_init(struct ath5k_hw *ah); +void ath5k_hw_deinit(struct ath5k_hw *ah); -/* Attach/Detach Functions */ -int ath5k_hw_attach(struct ath5k_softc *sc); -void ath5k_hw_detach(struct ath5k_hw *ah); +int ath5k_sysfs_register(struct ath5k_hw *ah); +void ath5k_sysfs_unregister(struct ath5k_hw *ah); -int ath5k_sysfs_register(struct ath5k_softc *sc); -void ath5k_sysfs_unregister(struct ath5k_softc *sc); +/*Chip id helper functions */ +int ath5k_hw_read_srev(struct ath5k_hw *ah); /* LED functions */ -int ath5k_init_leds(struct ath5k_softc *sc); -void ath5k_led_enable(struct ath5k_softc *sc); -void ath5k_led_off(struct ath5k_softc *sc); -void ath5k_unregister_leds(struct ath5k_softc *sc); +int ath5k_init_leds(struct ath5k_hw *ah); +void ath5k_led_enable(struct ath5k_hw *ah); +void ath5k_led_off(struct ath5k_hw *ah); +void ath5k_unregister_leds(struct ath5k_hw *ah); + /* Reset Functions */ -int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); +int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel); int ath5k_hw_on_hold(struct ath5k_hw *ah); int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, - struct ieee80211_channel *channel, bool change_channel); + struct ieee80211_channel *channel, bool fast, bool skip_pcu); int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); /* Power management functions */ + +/* Clock rate related functions */ +unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); +unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); +void ath5k_hw_set_clockrate(struct ath5k_hw *ah); + + /* DMA Related Functions */ void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); -int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); -void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); -int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue); u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); @@ -1171,38 +1517,43 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); +/* Init/Stop functions */ +void ath5k_hw_dma_init(struct ath5k_hw *ah); +int ath5k_hw_dma_stop(struct ath5k_hw *ah); /* EEPROM access functions */ int ath5k_eeprom_init(struct ath5k_hw *ah); void ath5k_eeprom_detach(struct ath5k_hw *ah); -int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); +int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel); /* Protocol Control Unit Functions */ -extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); +/* Helpers */ +int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band, + int len, struct ieee80211_rate *rate, bool shortpre); +unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); +unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); +int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); -/* BSSID Functions */ +/* RX filter control*/ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); void ath5k_hw_set_bssid(struct ath5k_hw *ah); void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); -/* Receive start/stop functions */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); -/* RX Filter functions */ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); +/* Receive (DRU) start/stop functions */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); /* Beacon control functions */ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); void ath5k_hw_reset_tsf(struct ath5k_hw *ah); -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); +void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, + u32 interval); bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); -/* ACK bit rate */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); -/* Clock rate related functions */ -unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); -unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); -void ath5k_hw_set_clockrate(struct ath5k_hw *ah); +/* Init function */ +void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); /* Queue Control Unit, DFS Control Unit Functions */ int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, @@ -1212,10 +1563,14 @@ int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); +void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, + unsigned int queue); u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); -int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); +int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time); +/* Init function */ +int ath5k_hw_init_queues(struct ath5k_hw *ah); /* Hardware Descriptor Functions */ int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); @@ -1225,6 +1580,7 @@ int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); + /* GPIO Functions */ void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); @@ -1234,31 +1590,31 @@ int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); -/* rfkill Functions */ + +/* RFkill Functions */ void ath5k_rfkill_hw_start(struct ath5k_hw *ah); void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); -/* Misc functions */ + +/* Misc functions TODO: Cleanup */ int ath5k_hw_set_capabilities(struct ath5k_hw *ah); -int ath5k_hw_get_capability(struct ath5k_hw *ah, - enum ath5k_capability_type cap_type, u32 capability, - u32 *result); int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); + /* Initial register settings functions */ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); -/* Initialize RF */ -int ath5k_hw_rfregs_init(struct ath5k_hw *ah, - struct ieee80211_channel *channel, - unsigned int mode); -int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq); + +/* PHY functions */ +/* Misc PHY functions */ +u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band); +int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* Gain_F optimization */ enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); /* PHY/RF channel functions */ -bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); -int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); +bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* PHY calibration */ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, @@ -1267,41 +1623,81 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); /* Spur mitigation */ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, struct ieee80211_channel *channel); -void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, - struct ieee80211_channel *channel); -/* Misc PHY functions */ -u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); -int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* Antenna control */ void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); /* TX power setup */ -int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - u8 ee_mode, u8 txpower); int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); +/* Init function */ +int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 mode, bool fast); /* - * Functions used internaly + * Functions used internally */ static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) { - return &ah->common; + return &ah->common; } static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) { - return &(ath5k_hw_common(ah)->regulatory); + return &(ath5k_hw_common(ah)->regulatory); +} + +#ifdef CONFIG_ATHEROS_AR231X +#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000) + +static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) +{ + /* On AR2315 and AR2317 the PCI clock domain registers + * are outside of the WMAC register space */ + if (unlikely((reg >= 0x4000) && (reg < 0x5000) && + (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) + return AR5K_AR2315_PCI_BASE + reg; + + return ah->iobase + reg; } static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) { - return ioread32(ah->ah_iobase + reg); + return ioread32(ath5k_ahb_reg(ah, reg)); } static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) { - iowrite32(val, ah->ah_iobase + reg); + iowrite32(val, ath5k_ahb_reg(ah, reg)); +} + +#else + +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return ioread32(ah->iobase + reg); +} + +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + iowrite32(val, ah->iobase + reg); +} + +#endif + +static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah) +{ + return ath5k_hw_common(ah)->bus_ops->ath_bus_type; +} + +static inline void ath5k_read_cachesize(struct ath_common *common, int *csz) +{ + common->bus_ops->read_cachesize(common, csz); +} + +static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data) +{ + struct ath_common *common = ath5k_hw_common(ah); + return common->bus_ops->eeprom_read(common, off, data); } static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index fbe8aca975d..7106547a14d 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -20,16 +20,16 @@ * Attach/Detach Functions and helpers * \*************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/pci.h> #include <linux/slab.h> #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" /** - * ath5k_hw_post - Power On Self Test helper function - * + * ath5k_hw_post() - Power On Self Test helper function * @ah: The &struct ath5k_hw */ static int ath5k_hw_post(struct ath5k_hw *ah) @@ -59,7 +59,7 @@ static int ath5k_hw_post(struct ath5k_hw *ah) cur_val = ath5k_hw_reg_read(ah, cur_reg); if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); + ATH5K_ERR(ah, "POST Failed !!!\n"); return -EAGAIN; } @@ -74,7 +74,7 @@ static int ath5k_hw_post(struct ath5k_hw *ah) cur_val = ath5k_hw_reg_read(ah, cur_reg); if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); + ATH5K_ERR(ah, "POST Failed !!!\n"); return -EAGAIN; } @@ -93,20 +93,19 @@ static int ath5k_hw_post(struct ath5k_hw *ah) } /** - * ath5k_hw_attach - Check if hw is supported and init the needed structs - * - * @sc: The &struct ath5k_softc we got from the driver's attach function + * ath5k_hw_init() - Check if hw is supported and init the needed structs + * @ah: The &struct ath5k_hw associated with the device * * Check if the device is supported, perform a POST and initialize the needed * structs. Returns -ENOMEM if we don't have memory for the needed structs, * -ENODEV if the device is not supported or prints an error msg if something * else went wrong. */ -int ath5k_hw_attach(struct ath5k_softc *sc) +int ath5k_hw_init(struct ath5k_hw *ah) { - struct ath5k_hw *ah = sc->ah; + static const u8 zero_mac[ETH_ALEN] = { }; struct ath_common *common = ath5k_hw_common(ah); - struct pci_dev *pdev = sc->pdev; + struct pci_dev *pdev = ah->pdev; struct ath5k_eeprom_info *ee; int ret; u32 srev; @@ -114,21 +113,21 @@ int ath5k_hw_attach(struct ath5k_softc *sc) /* * HW information */ - ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; - ah->ah_turbo = false; + ah->ah_bwmode = AR5K_BWMODE_DEFAULT; ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; ah->ah_imr = 0; - ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; - ah->ah_software_retry = false; + ah->ah_retry_short = AR5K_INIT_RETRY_SHORT; + ah->ah_retry_long = AR5K_INIT_RETRY_LONG; ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT; ah->ah_noise_floor = -95; /* until first NF calibration is run */ - sc->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO; - ah->ah_current_channel = &sc->channels[0]; + ah->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO; + ah->ah_current_channel = &ah->channels[0]; /* * Find the mac version */ - srev = ath5k_hw_reg_read(ah, AR5K_SREV); + ath5k_hw_read_srev(ah); + srev = ah->ah_mac_srev; if (srev < AR5K_SREV_AR5311) ah->ah_version = AR5K_AR5210; else if (srev < AR5K_SREV_AR5212) @@ -136,24 +135,24 @@ int ath5k_hw_attach(struct ath5k_softc *sc) else ah->ah_version = AR5K_AR5212; + /* Get the MAC version */ + ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); + /* Fill the ath5k_hw struct with the needed functions */ ret = ath5k_hw_init_desc_functions(ah); if (ret) goto err; /* Bring device out of sleep and reset its units */ - ret = ath5k_hw_nic_wakeup(ah, 0, true); + ret = ath5k_hw_nic_wakeup(ah, NULL); if (ret) goto err; - /* Get MAC, PHY and RADIO revisions */ - ah->ah_mac_srev = srev; - ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); + /* Get PHY and RADIO revisions */ ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & 0xffffffff; ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_5GHZ); - ah->ah_phy = AR5K_PHY(0); + IEEE80211_BAND_5GHZ); /* Try to identify radio chip based on its srev */ switch (ah->ah_radio_5ghz_revision & 0xf0) { @@ -161,14 +160,14 @@ int ath5k_hw_attach(struct ath5k_softc *sc) ah->ah_radio = AR5K_RF5111; ah->ah_single_chip = false; ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); + IEEE80211_BAND_2GHZ); break; case AR5K_SREV_RAD_5112: case AR5K_SREV_RAD_2112: ah->ah_radio = AR5K_RF5112; ah->ah_single_chip = false; ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); + IEEE80211_BAND_2GHZ); break; case AR5K_SREV_RAD_2413: ah->ah_radio = AR5K_RF2413; @@ -188,7 +187,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) break; case AR5K_SREV_RAD_5424: if (ah->ah_mac_version == AR5K_SREV_AR2425 || - ah->ah_mac_version == AR5K_SREV_AR2417){ + ah->ah_mac_version == AR5K_SREV_AR2417) { ah->ah_radio = AR5K_RF2425; ah->ah_single_chip = true; } else { @@ -205,44 +204,44 @@ int ath5k_hw_attach(struct ath5k_softc *sc) ah->ah_radio = AR5K_RF5111; ah->ah_single_chip = false; ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); + IEEE80211_BAND_2GHZ); } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) || - ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_2425) { + ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_2425) { ah->ah_radio = AR5K_RF2425; ah->ah_single_chip = true; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425; } else if (srev == AR5K_SREV_AR5213A && - ah->ah_phy_revision == AR5K_SREV_PHY_5212B) { + ah->ah_phy_revision == AR5K_SREV_PHY_5212B) { ah->ah_radio = AR5K_RF5112; ah->ah_single_chip = false; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5112B; - } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) { + } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4) || + ah->ah_mac_version == (AR5K_SREV_AR2315_R6 >> 4)) { ah->ah_radio = AR5K_RF2316; ah->ah_single_chip = true; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316; } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_5413) { + ah->ah_phy_revision == AR5K_SREV_PHY_5413) { ah->ah_radio = AR5K_RF5413; ah->ah_single_chip = true; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413; } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_2413) { + ah->ah_phy_revision == AR5K_SREV_PHY_2413) { ah->ah_radio = AR5K_RF2413; ah->ah_single_chip = true; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413; } else { - ATH5K_ERR(sc, "Couldn't identify radio revision.\n"); + ATH5K_ERR(ah, "Couldn't identify radio revision.\n"); ret = -ENODEV; goto err; } } - /* Return on unsuported chips (unsupported eeprom etc) */ - if ((srev >= AR5K_SREV_AR5416) && - (srev < AR5K_SREV_AR2425)) { - ATH5K_ERR(sc, "Device not yet supported.\n"); + /* Return on unsupported chips (unsupported eeprom etc) */ + if ((srev >= AR5K_SREV_AR5416) && (srev < AR5K_SREV_AR2425)) { + ATH5K_ERR(ah, "Device not yet supported.\n"); ret = -ENODEV; goto err; } @@ -264,7 +263,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) */ ret = ath5k_eeprom_init(ah); if (ret) { - ATH5K_ERR(sc, "unable to init EEPROM\n"); + ATH5K_ERR(ah, "unable to init EEPROM\n"); goto err; } @@ -273,7 +272,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) /* * Write PCI-E power save settings */ - if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { + if ((ah->ah_version == AR5K_AR5212) && pdev && (pci_is_pcie(pdev))) { ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES); ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES); @@ -281,7 +280,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc) ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES); ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES); - /* If serdes programing is enabled, increase PCI-E + /* If serdes programming is enabled, increase PCI-E * tx power for systems with long trace from host * to minicard connector. */ if (ee->ee_serdes) @@ -299,23 +298,22 @@ int ath5k_hw_attach(struct ath5k_softc *sc) /* Reset SERDES to load new settings */ ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET); - mdelay(1); + usleep_range(1000, 1500); } /* Get misc capabilities */ ret = ath5k_hw_set_capabilities(ah); if (ret) { - ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", - sc->pdev->device); + ATH5K_ERR(ah, "unable to get device capabilities\n"); goto err; } /* Crypto settings */ - common->keymax = (sc->ah->ah_version == AR5K_AR5210 ? + common->keymax = (ah->ah_version == AR5K_AR5210 ? AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211); if (srev >= AR5K_SREV_AR5212_V4 && - (ee->ee_version >= AR5K_EEPROM_VERSION_5_0 && + (ee->ee_version < AR5K_EEPROM_VERSION_5_0 || !AR5K_EEPROM_AES_DIS(ee->ee_misc5))) common->crypt_caps |= ATH_CRYPT_CAP_CIPHER_AESCCM; @@ -326,12 +324,12 @@ int ath5k_hw_attach(struct ath5k_softc *sc) } /* MAC address is cleared until add_interface */ - ath5k_hw_set_lladdr(ah, (u8[ETH_ALEN]){}); + ath5k_hw_set_lladdr(ah, zero_mac); /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ memcpy(common->curbssid, ath_bcast_mac, ETH_ALEN); ath5k_hw_set_bssid(ah); - ath5k_hw_set_opmode(ah, sc->opmode); + ath5k_hw_set_opmode(ah, ah->opmode); ath5k_hw_rfgain_opt_init(ah); @@ -346,13 +344,12 @@ err: } /** - * ath5k_hw_detach - Free the ath5k_hw struct - * + * ath5k_hw_deinit() - Free the &struct ath5k_hw * @ah: The &struct ath5k_hw */ -void ath5k_hw_detach(struct ath5k_hw *ah) +void ath5k_hw_deinit(struct ath5k_hw *ah) { - __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); + __set_bit(ATH_STAT_INVALID, ah->status); if (ah->ah_rf_banks != NULL) kfree(ah->ah_rf_banks); diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 7f783d9462a..4b18434ba69 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -40,37 +40,51 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/hardirq.h> #include <linux/if.h> #include <linux/io.h> #include <linux/netdevice.h> #include <linux/cache.h> -#include <linux/pci.h> -#include <linux/pci-aspm.h> #include <linux/ethtool.h> #include <linux/uaccess.h> #include <linux/slab.h> #include <linux/etherdevice.h> +#include <linux/nl80211.h> +#include <net/cfg80211.h> #include <net/ieee80211_radiotap.h> #include <asm/unaligned.h> +#include <net/mac80211.h> #include "base.h" #include "reg.h" #include "debug.h" #include "ani.h" -#include "../debug.h" +#include "ath5k.h" +#include "../regd.h" + +#define CREATE_TRACE_POINTS +#include "trace.h" -static int modparam_nohwcrypt; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +bool ath5k_modparam_nohwcrypt; +module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -static int modparam_all_channels; -module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO); -MODULE_PARM_DESC(all_channels, "Expose all channels the device can use."); +static bool modparam_fastchanswitch; +module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO); +MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios."); + +static bool ath5k_modparam_no_hw_rfkill_switch; +module_param_named(no_hw_rfkill_switch, ath5k_modparam_no_hw_rfkill_switch, + bool, S_IRUGO); +MODULE_PARM_DESC(no_hw_rfkill_switch, "Ignore the GPIO RFKill switch state"); + /* Module info */ MODULE_AUTHOR("Jiri Slaby"); @@ -78,39 +92,22 @@ MODULE_AUTHOR("Nick Kossifidis"); MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards."); MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards"); MODULE_LICENSE("Dual BSD/GPL"); -MODULE_VERSION("0.6.0 (EXPERIMENTAL)"); - -static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan); -static int ath5k_beacon_update(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); -static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf); - -/* Known PCI ids */ -static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = { - { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */ - { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */ - { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/ - { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */ - { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */ - { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */ - { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */ - { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */ - { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */ - { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ - { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ - { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */ - { 0 } -}; -MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); + +static int ath5k_init(struct ieee80211_hw *hw); +static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan, + bool skip_pcu); /* Known SREVs */ static const struct ath5k_srev_name srev_names[] = { +#ifdef CONFIG_ATHEROS_AR231X + { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R2 }, + { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R7 }, + { "2313", AR5K_VERSION_MAC, AR5K_SREV_AR2313_R8 }, + { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R6 }, + { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R7 }, + { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R1 }, + { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R2 }, +#else { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 }, { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 }, { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A }, @@ -129,6 +126,7 @@ static const struct ath5k_srev_name srev_names[] = { { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 }, { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 }, { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 }, +#endif { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN }, { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 }, { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 }, @@ -142,10 +140,12 @@ static const struct ath5k_srev_name srev_names[] = { { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B }, { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 }, { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 }, - { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 }, - { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 }, { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 }, { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 }, +#ifdef CONFIG_ATHEROS_AR231X + { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 }, + { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 }, +#endif { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, }; @@ -166,63 +166,38 @@ static const struct ieee80211_rate ath5k_rates[] = { .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 60, .hw_value = ATH5K_RATE_CODE_6M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 90, .hw_value = ATH5K_RATE_CODE_9M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 120, .hw_value = ATH5K_RATE_CODE_12M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 180, .hw_value = ATH5K_RATE_CODE_18M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 240, .hw_value = ATH5K_RATE_CODE_24M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 360, .hw_value = ATH5K_RATE_CODE_36M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 480, .hw_value = ATH5K_RATE_CODE_48M, - .flags = 0 }, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, { .bitrate = 540, .hw_value = ATH5K_RATE_CODE_54M, - .flags = 0 }, - /* XR missing */ + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, }; -static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc, - struct ath5k_buf *bf) -{ - BUG_ON(!bf); - if (!bf->skb) - return; - pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len, - PCI_DMA_TODEVICE); - dev_kfree_skb_any(bf->skb); - bf->skb = NULL; - bf->skbaddr = 0; - bf->desc->ds_data = 0; -} - -static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc, - struct ath5k_buf *bf) -{ - struct ath5k_hw *ah = sc->ah; - struct ath_common *common = ath5k_hw_common(ah); - - BUG_ON(!bf); - if (!bf->skb) - return; - pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize, - PCI_DMA_FROMDEVICE); - dev_kfree_skb_any(bf->skb); - bf->skb = NULL; - bf->skbaddr = 0; - bf->desc->ds_data = 0; -} - - static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) { u64 tsf = ath5k_hw_get_tsf64(ah); @@ -233,7 +208,7 @@ static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) return (tsf & ~0x7fff) | rstamp; } -static const char * +const char * ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val) { const char *name = "xxxxx"; @@ -275,13 +250,14 @@ static const struct ath_ops ath5k_common_ops = { * Driver Initialization * \***********************/ -static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) +static void ath5k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); - struct ath5k_softc *sc = hw->priv; - struct ath_regulatory *regulatory = ath5k_hw_regulatory(sc->ah); + struct ath5k_hw *ah = hw->priv; + struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); - return ath_reg_notifier_apply(wiphy, request, regulatory); + ath_reg_notifier_apply(wiphy, request, regulatory); } /********************\ @@ -289,142 +265,126 @@ static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *re \********************/ /* - * Convert IEEE channel number to MHz frequency. + * Returns true for the channel numbers used. */ -static inline short -ath5k_ieee2mhz(short chan) +#ifdef CONFIG_ATH5K_TEST_CHANNELS +static bool ath5k_is_standard_channel(short chan, enum ieee80211_band band) { - if (chan <= 14 || chan >= 27) - return ieee80211chan2mhz(chan); - else - return 2212 + chan * 20; + return true; } -/* - * Returns true for the channel numbers used without all_channels modparam. - */ -static bool ath5k_is_standard_channel(short chan) +#else +static bool ath5k_is_standard_channel(short chan, enum ieee80211_band band) { - return ((chan <= 14) || - /* UNII 1,2 */ - ((chan & 3) == 0 && chan >= 36 && chan <= 64) || + if (band == IEEE80211_BAND_2GHZ && chan <= 14) + return true; + + return /* UNII 1,2 */ + (((chan & 3) == 0 && chan >= 36 && chan <= 64) || /* midband */ ((chan & 3) == 0 && chan >= 100 && chan <= 140) || /* UNII-3 */ - ((chan & 3) == 1 && chan >= 149 && chan <= 165)); + ((chan & 3) == 1 && chan >= 149 && chan <= 165) || + /* 802.11j 5.030-5.080 GHz (20MHz) */ + (chan == 8 || chan == 12 || chan == 16) || + /* 802.11j 4.9GHz (20MHz) */ + (chan == 184 || chan == 188 || chan == 192 || chan == 196)); } +#endif static unsigned int -ath5k_copy_channels(struct ath5k_hw *ah, - struct ieee80211_channel *channels, - unsigned int mode, - unsigned int max) +ath5k_setup_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels, + unsigned int mode, unsigned int max) { - unsigned int i, count, size, chfreq, freq, ch; - - if (!test_bit(mode, ah->ah_modes)) - return 0; + unsigned int count, size, freq, ch; + enum ieee80211_band band; switch (mode) { case AR5K_MODE_11A: - case AR5K_MODE_11A_TURBO: /* 1..220, but 2GHz frequencies are filtered by check_channel */ - size = 220 ; - chfreq = CHANNEL_5GHZ; + size = 220; + band = IEEE80211_BAND_5GHZ; break; case AR5K_MODE_11B: case AR5K_MODE_11G: - case AR5K_MODE_11G_TURBO: size = 26; - chfreq = CHANNEL_2GHZ; + band = IEEE80211_BAND_2GHZ; break; default: - ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n"); + ATH5K_WARN(ah, "bad mode, not copying channels\n"); return 0; } - for (i = 0, count = 0; i < size && max > 0; i++) { - ch = i + 1 ; - freq = ath5k_ieee2mhz(ch); + count = 0; + for (ch = 1; ch <= size && count < max; ch++) { + freq = ieee80211_channel_to_frequency(ch, band); - /* Check if channel is supported by the chipset */ - if (!ath5k_channel_ok(ah, freq, chfreq)) + if (freq == 0) /* mapping failed - not a standard channel */ continue; - if (!modparam_all_channels && !ath5k_is_standard_channel(ch)) + /* Write channel info, needed for ath5k_channel_ok() */ + channels[count].center_freq = freq; + channels[count].band = band; + channels[count].hw_value = mode; + + /* Check if channel is supported by the chipset */ + if (!ath5k_channel_ok(ah, &channels[count])) continue; - /* Write channel info and increment counter */ - channels[count].center_freq = freq; - channels[count].band = (chfreq == CHANNEL_2GHZ) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - switch (mode) { - case AR5K_MODE_11A: - case AR5K_MODE_11G: - channels[count].hw_value = chfreq | CHANNEL_OFDM; - break; - case AR5K_MODE_11A_TURBO: - case AR5K_MODE_11G_TURBO: - channels[count].hw_value = chfreq | - CHANNEL_OFDM | CHANNEL_TURBO; - break; - case AR5K_MODE_11B: - channels[count].hw_value = CHANNEL_B; - } + if (!ath5k_is_standard_channel(ch, band)) + continue; count++; - max--; } return count; } static void -ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b) +ath5k_setup_rate_idx(struct ath5k_hw *ah, struct ieee80211_supported_band *b) { u8 i; for (i = 0; i < AR5K_MAX_RATES; i++) - sc->rate_idx[b->band][i] = -1; + ah->rate_idx[b->band][i] = -1; for (i = 0; i < b->n_bitrates; i++) { - sc->rate_idx[b->band][b->bitrates[i].hw_value] = i; + ah->rate_idx[b->band][b->bitrates[i].hw_value] = i; if (b->bitrates[i].hw_value_short) - sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i; + ah->rate_idx[b->band][b->bitrates[i].hw_value_short] = i; } } static int ath5k_setup_bands(struct ieee80211_hw *hw) { - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = hw->priv; struct ieee80211_supported_band *sband; int max_c, count_c = 0; int i; - BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS); - max_c = ARRAY_SIZE(sc->channels); + BUILD_BUG_ON(ARRAY_SIZE(ah->sbands) < IEEE80211_NUM_BANDS); + max_c = ARRAY_SIZE(ah->channels); /* 2GHz band */ - sband = &sc->sbands[IEEE80211_BAND_2GHZ]; + sband = &ah->sbands[IEEE80211_BAND_2GHZ]; sband->band = IEEE80211_BAND_2GHZ; - sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0]; + sband->bitrates = &ah->rates[IEEE80211_BAND_2GHZ][0]; - if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) { + if (test_bit(AR5K_MODE_11G, ah->ah_capabilities.cap_mode)) { /* G mode */ memcpy(sband->bitrates, &ath5k_rates[0], sizeof(struct ieee80211_rate) * 12); sband->n_bitrates = 12; - sband->channels = sc->channels; - sband->n_channels = ath5k_copy_channels(ah, sband->channels, + sband->channels = ah->channels; + sband->n_channels = ath5k_setup_channels(ah, sband->channels, AR5K_MODE_11G, max_c); hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; count_c = sband->n_channels; max_c -= count_c; - } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) { + } else if (test_bit(AR5K_MODE_11B, ah->ah_capabilities.cap_mode)) { /* B mode */ memcpy(sband->bitrates, &ath5k_rates[0], sizeof(struct ieee80211_rate) * 4); @@ -443,35 +403,35 @@ ath5k_setup_bands(struct ieee80211_hw *hw) } } - sband->channels = sc->channels; - sband->n_channels = ath5k_copy_channels(ah, sband->channels, + sband->channels = ah->channels; + sband->n_channels = ath5k_setup_channels(ah, sband->channels, AR5K_MODE_11B, max_c); hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; count_c = sband->n_channels; max_c -= count_c; } - ath5k_setup_rate_idx(sc, sband); + ath5k_setup_rate_idx(ah, sband); /* 5GHz band, A mode */ - if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) { - sband = &sc->sbands[IEEE80211_BAND_5GHZ]; + if (test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)) { + sband = &ah->sbands[IEEE80211_BAND_5GHZ]; sband->band = IEEE80211_BAND_5GHZ; - sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0]; + sband->bitrates = &ah->rates[IEEE80211_BAND_5GHZ][0]; memcpy(sband->bitrates, &ath5k_rates[4], sizeof(struct ieee80211_rate) * 8); sband->n_bitrates = 8; - sband->channels = &sc->channels[count_c]; - sband->n_channels = ath5k_copy_channels(ah, sband->channels, + sband->channels = &ah->channels[count_c]; + sband->n_channels = ath5k_setup_channels(ah, sband->channels, AR5K_MODE_11A, max_c); hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband; } - ath5k_setup_rate_idx(sc, sband); + ath5k_setup_rate_idx(ah, sband); - ath5k_debug_dump_bands(sc); + ath5k_debug_dump_bands(ah); return 0; } @@ -481,14 +441,30 @@ ath5k_setup_bands(struct ieee80211_hw *hw) * To accomplish this we must first cleanup any pending DMA, * then restart stuff after a la ath5k_init. * - * Called with sc->lock. + * Called with ah->lock. */ -static int -ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) +int +ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef) { - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "channel set, resetting (%u -> %u MHz)\n", - sc->curchan->center_freq, chan->center_freq); + ah->curchan->center_freq, chandef->chan->center_freq); + + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_20_NOHT: + ah->ah_bwmode = AR5K_BWMODE_DEFAULT; + break; + case NL80211_CHAN_WIDTH_5: + ah->ah_bwmode = AR5K_BWMODE_5MHZ; + break; + case NL80211_CHAN_WIDTH_10: + ah->ah_bwmode = AR5K_BWMODE_10MHZ; + break; + default: + WARN_ON(1); + return -EINVAL; + } /* * To switch channels clear any pending DMA operations; @@ -496,34 +472,12 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - return ath5k_reset(sc, chan); -} - -static void -ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) -{ - sc->curmode = mode; - - if (mode == AR5K_MODE_11A) { - sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ]; - } else { - sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ]; - } + return ath5k_reset(ah, chandef->chan, true); } -struct ath_vif_iter_data { - const u8 *hw_macaddr; - u8 mask[ETH_ALEN]; - u8 active_mac[ETH_ALEN]; /* first active MAC */ - bool need_set_hw_addr; - bool found_active; - bool any_assoc; - enum nl80211_iftype opmode; -}; - -static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) +void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) { - struct ath_vif_iter_data *iter_data = data; + struct ath5k_vif_iter_data *iter_data = data; int i; struct ath5k_vif *avf = (void *)vif->drv_priv; @@ -538,7 +492,7 @@ static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) } if (iter_data->need_set_hw_addr && iter_data->hw_macaddr) - if (compare_ether_addr(iter_data->hw_macaddr, mac) == 0) + if (ether_addr_equal(iter_data->hw_macaddr, mac)) iter_data->need_set_hw_addr = false; if (!iter_data->any_assoc) { @@ -553,16 +507,21 @@ static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) */ if (avf->opmode == NL80211_IFTYPE_AP) iter_data->opmode = NL80211_IFTYPE_AP; - else + else { + if (avf->opmode == NL80211_IFTYPE_STATION) + iter_data->n_stas++; if (iter_data->opmode == NL80211_IFTYPE_UNSPECIFIED) iter_data->opmode = avf->opmode; + } } -static void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc, - struct ieee80211_vif *vif) +void +ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah, + struct ieee80211_vif *vif) { - struct ath_common *common = ath5k_hw_common(sc->ah); - struct ath_vif_iter_data iter_data; + struct ath_common *common = ath5k_hw_common(ah); + struct ath5k_vif_iter_data iter_data; + u32 rfilt; /* * Use the hardware MAC address as reference, the hardware uses it @@ -573,47 +532,48 @@ static void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc, iter_data.found_active = false; iter_data.need_set_hw_addr = true; iter_data.opmode = NL80211_IFTYPE_UNSPECIFIED; + iter_data.n_stas = 0; if (vif) - ath_vif_iter(&iter_data, vif->addr, vif); + ath5k_vif_iter(&iter_data, vif->addr, vif); /* Get list of all active MAC addresses */ - ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter, - &iter_data); - memcpy(sc->bssidmask, iter_data.mask, ETH_ALEN); + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); + memcpy(ah->bssidmask, iter_data.mask, ETH_ALEN); - sc->opmode = iter_data.opmode; - if (sc->opmode == NL80211_IFTYPE_UNSPECIFIED) + ah->opmode = iter_data.opmode; + if (ah->opmode == NL80211_IFTYPE_UNSPECIFIED) /* Nothing active, default to station mode */ - sc->opmode = NL80211_IFTYPE_STATION; + ah->opmode = NL80211_IFTYPE_STATION; - ath5k_hw_set_opmode(sc->ah, sc->opmode); - ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n", - sc->opmode, ath_opmode_to_string(sc->opmode)); + ath5k_hw_set_opmode(ah, ah->opmode); + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n", + ah->opmode, ath_opmode_to_string(ah->opmode)); if (iter_data.need_set_hw_addr && iter_data.found_active) - ath5k_hw_set_lladdr(sc->ah, iter_data.active_mac); + ath5k_hw_set_lladdr(ah, iter_data.active_mac); - if (ath5k_hw_hasbssidmask(sc->ah)) - ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); -} + if (ath5k_hw_hasbssidmask(ah)) + ath5k_hw_set_bssid_mask(ah, ah->bssidmask); -static void -ath5k_mode_setup(struct ath5k_softc *sc, struct ieee80211_vif *vif) -{ - struct ath5k_hw *ah = sc->ah; - u32 rfilt; + /* Set up RX Filter */ + if (iter_data.n_stas > 1) { + /* If you have multiple STA interfaces connected to + * different APs, ARPs are not received (most of the time?) + * Enabling PROMISC appears to fix that problem. + */ + ah->filter_flags |= AR5K_RX_FILTER_PROM; + } - /* configure rx filter */ - rfilt = sc->filter_flags; + rfilt = ah->filter_flags; ath5k_hw_set_rx_filter(ah, rfilt); - ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); - - ath5k_update_bssid_mask_and_opmode(sc, vif); + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } static inline int -ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) +ath5k_hw_to_driver_rix(struct ath5k_hw *ah, int hw_rix) { int rix; @@ -622,7 +582,7 @@ ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) "hw_rix out of bounds: %x\n", hw_rix)) return 0; - rix = sc->rate_idx[sc->curband->band][hw_rix]; + rix = ah->rate_idx[ah->curchan->band][hw_rix]; if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix)) rix = 0; @@ -634,9 +594,9 @@ ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) \***************/ static -struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr) +struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_hw *ah, dma_addr_t *skb_addr) { - struct ath_common *common = ath5k_hw_common(sc->ah); + struct ath_common *common = ath5k_hw_common(ah); struct sk_buff *skb; /* @@ -648,16 +608,17 @@ struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr) GFP_ATOMIC); if (!skb) { - ATH5K_ERR(sc, "can't alloc skbuff of size %u\n", + ATH5K_ERR(ah, "can't alloc skbuff of size %u\n", common->rx_bufsize); return NULL; } - *skb_addr = pci_map_single(sc->pdev, + *skb_addr = dma_map_single(ah->dev, skb->data, common->rx_bufsize, - PCI_DMA_FROMDEVICE); - if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) { - ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__); + DMA_FROM_DEVICE); + + if (unlikely(dma_mapping_error(ah->dev, *skb_addr))) { + ATH5K_ERR(ah, "%s: DMA mapping failed\n", __func__); dev_kfree_skb(skb); return NULL; } @@ -665,15 +626,14 @@ struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr) } static int -ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) +ath5k_rxbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) { - struct ath5k_hw *ah = sc->ah; struct sk_buff *skb = bf->skb; struct ath5k_desc *ds; int ret; if (!skb) { - skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr); + skb = ath5k_rx_skb_alloc(ah, &bf->skbaddr); if (!skb) return -ENOMEM; bf->skb = skb; @@ -699,13 +659,13 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ds->ds_data = bf->skbaddr; ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0); if (ret) { - ATH5K_ERR(sc, "%s: could not setup RX desc\n", __func__); + ATH5K_ERR(ah, "%s: could not setup RX desc\n", __func__); return ret; } - if (sc->rxlink != NULL) - *sc->rxlink = bf->daddr; - sc->rxlink = &ds->ds_link; + if (ah->rxlink != NULL) + *ah->rxlink = bf->daddr; + ah->rxlink = &ds->ds_link; return 0; } @@ -732,11 +692,47 @@ static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb) return htype; } +static struct ieee80211_rate * +ath5k_get_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *info, + struct ath5k_buf *bf, int idx) +{ + /* + * convert a ieee80211_tx_rate RC-table entry to + * the respective ieee80211_rate struct + */ + if (bf->rates[idx].idx < 0) { + return NULL; + } + + return &hw->wiphy->bands[info->band]->bitrates[ bf->rates[idx].idx ]; +} + +static u16 +ath5k_get_rate_hw_value(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *info, + struct ath5k_buf *bf, int idx) +{ + struct ieee80211_rate *rate; + u16 hw_rate; + u8 rc_flags; + + rate = ath5k_get_rate(hw, info, bf, idx); + if (!rate) + return 0; + + rc_flags = bf->rates[idx].flags; + hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ? + rate->hw_value_short : rate->hw_value; + + return hw_rate; +} + static int -ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, - struct ath5k_txq *txq, int padsize) +ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf, + struct ath5k_txq *txq, int padsize, + struct ieee80211_tx_control *control) { - struct ath5k_hw *ah = sc->ah; struct ath5k_desc *ds = bf->desc; struct sk_buff *skb = bf->skb; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -752,10 +748,17 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK; /* XXX endianness */ - bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len, - PCI_DMA_TODEVICE); + bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len, + DMA_TO_DEVICE); + + if (dma_mapping_error(ah->dev, bf->skbaddr)) + return -ENOSPC; + + ieee80211_get_tx_rates(info->control.vif, (control) ? control->sta : NULL, skb, bf->rates, + ARRAY_SIZE(bf->rates)); + + rate = ath5k_get_rate(ah->hw, info, bf, 0); - rate = ieee80211_get_tx_rate(sc->hw, info); if (!rate) { ret = -EINVAL; goto err_unmap; @@ -765,8 +768,8 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, flags |= AR5K_TXDESC_NOACK; rc_flags = info->control.rates[0].flags; - hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ? - rate->hw_value_short : rate->hw_value; + + hw_rate = ath5k_get_rate_hw_value(ah->hw, info, bf, 0); pktlen = skb->len; @@ -779,41 +782,47 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, } if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { flags |= AR5K_TXDESC_RTSENA; - cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value; - duration = le16_to_cpu(ieee80211_rts_duration(sc->hw, + cts_rate = ieee80211_get_rts_cts_rate(ah->hw, info)->hw_value; + duration = le16_to_cpu(ieee80211_rts_duration(ah->hw, info->control.vif, pktlen, info)); } if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { flags |= AR5K_TXDESC_CTSENA; - cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value; - duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw, + cts_rate = ieee80211_get_rts_cts_rate(ah->hw, info)->hw_value; + duration = le16_to_cpu(ieee80211_ctstoself_duration(ah->hw, info->control.vif, pktlen, info)); } + ret = ah->ah_setup_tx_desc(ah, ds, pktlen, ieee80211_get_hdrlen_from_skb(skb), padsize, get_hw_packet_type(skb), - (sc->power_level * 2), + (ah->ah_txpower.txp_requested * 2), hw_rate, - info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags, + bf->rates[0].count, keyidx, ah->ah_tx_ant, flags, cts_rate, duration); if (ret) goto err_unmap; - memset(mrr_rate, 0, sizeof(mrr_rate)); - memset(mrr_tries, 0, sizeof(mrr_tries)); - for (i = 0; i < 3; i++) { - rate = ieee80211_get_alt_retry_rate(sc->hw, info, i); - if (!rate) - break; + /* Set up MRR descriptor */ + if (ah->ah_capabilities.cap_has_mrr_support) { + memset(mrr_rate, 0, sizeof(mrr_rate)); + memset(mrr_tries, 0, sizeof(mrr_tries)); - mrr_rate[i] = rate->hw_value; - mrr_tries[i] = info->control.rates[i + 1].count; - } + for (i = 0; i < 3; i++) { + + rate = ath5k_get_rate(ah->hw, info, bf, i); + if (!rate) + break; - ath5k_hw_setup_mrr_tx_desc(ah, ds, - mrr_rate[0], mrr_tries[0], - mrr_rate[1], mrr_tries[1], - mrr_rate[2], mrr_tries[2]); + mrr_rate[i] = ath5k_get_rate_hw_value(ah->hw, info, bf, i); + mrr_tries[i] = bf->rates[i].count; + } + + ath5k_hw_setup_mrr_tx_desc(ah, ds, + mrr_rate[0], mrr_tries[0], + mrr_rate[1], mrr_tries[1], + mrr_rate[2], mrr_tries[2]); + } ds->ds_link = 0; ds->ds_data = bf->skbaddr; @@ -833,7 +842,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, return 0; err_unmap: - pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); + dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE); return ret; } @@ -842,7 +851,7 @@ err_unmap: \*******************/ static int -ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev) +ath5k_desc_alloc(struct ath5k_hw *ah) { struct ath5k_desc *ds; struct ath5k_buf *bf; @@ -851,79 +860,110 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev) int ret; /* allocate descriptors */ - sc->desc_len = sizeof(struct ath5k_desc) * + ah->desc_len = sizeof(struct ath5k_desc) * (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1); - sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr); - if (sc->desc == NULL) { - ATH5K_ERR(sc, "can't allocate descriptors\n"); + + ah->desc = dma_alloc_coherent(ah->dev, ah->desc_len, + &ah->desc_daddr, GFP_KERNEL); + if (ah->desc == NULL) { + ATH5K_ERR(ah, "can't allocate descriptors\n"); ret = -ENOMEM; goto err; } - ds = sc->desc; - da = sc->desc_daddr; - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n", - ds, sc->desc_len, (unsigned long long)sc->desc_daddr); + ds = ah->desc; + da = ah->desc_daddr; + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n", + ds, ah->desc_len, (unsigned long long)ah->desc_daddr); bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF, sizeof(struct ath5k_buf), GFP_KERNEL); if (bf == NULL) { - ATH5K_ERR(sc, "can't allocate bufptr\n"); + ATH5K_ERR(ah, "can't allocate bufptr\n"); ret = -ENOMEM; goto err_free; } - sc->bufptr = bf; + ah->bufptr = bf; - INIT_LIST_HEAD(&sc->rxbuf); + INIT_LIST_HEAD(&ah->rxbuf); for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) { bf->desc = ds; bf->daddr = da; - list_add_tail(&bf->list, &sc->rxbuf); + list_add_tail(&bf->list, &ah->rxbuf); } - INIT_LIST_HEAD(&sc->txbuf); - sc->txbuf_len = ATH_TXBUF; - for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, - da += sizeof(*ds)) { + INIT_LIST_HEAD(&ah->txbuf); + ah->txbuf_len = ATH_TXBUF; + for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) { bf->desc = ds; bf->daddr = da; - list_add_tail(&bf->list, &sc->txbuf); + list_add_tail(&bf->list, &ah->txbuf); } /* beacon buffers */ - INIT_LIST_HEAD(&sc->bcbuf); + INIT_LIST_HEAD(&ah->bcbuf); for (i = 0; i < ATH_BCBUF; i++, bf++, ds++, da += sizeof(*ds)) { bf->desc = ds; bf->daddr = da; - list_add_tail(&bf->list, &sc->bcbuf); + list_add_tail(&bf->list, &ah->bcbuf); } return 0; err_free: - pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); + dma_free_coherent(ah->dev, ah->desc_len, ah->desc, ah->desc_daddr); err: - sc->desc = NULL; + ah->desc = NULL; return ret; } +void +ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf) +{ + BUG_ON(!bf); + if (!bf->skb) + return; + dma_unmap_single(ah->dev, bf->skbaddr, bf->skb->len, + DMA_TO_DEVICE); + ieee80211_free_txskb(ah->hw, bf->skb); + bf->skb = NULL; + bf->skbaddr = 0; + bf->desc->ds_data = 0; +} + +void +ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf) +{ + struct ath_common *common = ath5k_hw_common(ah); + + BUG_ON(!bf); + if (!bf->skb) + return; + dma_unmap_single(ah->dev, bf->skbaddr, common->rx_bufsize, + DMA_FROM_DEVICE); + dev_kfree_skb_any(bf->skb); + bf->skb = NULL; + bf->skbaddr = 0; + bf->desc->ds_data = 0; +} + static void -ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev) +ath5k_desc_free(struct ath5k_hw *ah) { struct ath5k_buf *bf; - list_for_each_entry(bf, &sc->txbuf, list) - ath5k_txbuf_free_skb(sc, bf); - list_for_each_entry(bf, &sc->rxbuf, list) - ath5k_rxbuf_free_skb(sc, bf); - list_for_each_entry(bf, &sc->bcbuf, list) - ath5k_txbuf_free_skb(sc, bf); + list_for_each_entry(bf, &ah->txbuf, list) + ath5k_txbuf_free_skb(ah, bf); + list_for_each_entry(bf, &ah->rxbuf, list) + ath5k_rxbuf_free_skb(ah, bf); + list_for_each_entry(bf, &ah->bcbuf, list) + ath5k_txbuf_free_skb(ah, bf); /* Free memory associated with all descriptors */ - pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); - sc->desc = NULL; - sc->desc_daddr = 0; + dma_free_coherent(ah->dev, ah->desc_len, ah->desc, ah->desc_daddr); + ah->desc = NULL; + ah->desc_daddr = 0; - kfree(sc->bufptr); - sc->bufptr = NULL; + kfree(ah->bufptr); + ah->bufptr = NULL; } @@ -932,10 +972,9 @@ ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev) \**************/ static struct ath5k_txq * -ath5k_txq_setup(struct ath5k_softc *sc, +ath5k_txq_setup(struct ath5k_hw *ah, int qtype, int subtype) { - struct ath5k_hw *ah = sc->ah; struct ath5k_txq *txq; struct ath5k_txq_info qi = { .tqi_subtype = subtype, @@ -969,13 +1008,7 @@ ath5k_txq_setup(struct ath5k_softc *sc, */ return ERR_PTR(qnum); } - if (qnum >= ARRAY_SIZE(sc->txqs)) { - ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n", - qnum, ARRAY_SIZE(sc->txqs)); - ath5k_hw_release_tx_queue(ah, qnum); - return ERR_PTR(-EINVAL); - } - txq = &sc->txqs[qnum]; + txq = &ah->txqs[qnum]; if (!txq->setup) { txq->qnum = qnum; txq->link = NULL; @@ -983,10 +1016,11 @@ ath5k_txq_setup(struct ath5k_softc *sc, spin_lock_init(&txq->lock); txq->setup = true; txq->txq_len = 0; + txq->txq_max = ATH5K_TXQ_LEN_MAX; txq->txq_poll_mark = false; txq->txq_stuck = 0; } - return &sc->txqs[qnum]; + return &ah->txqs[qnum]; } static int @@ -1006,18 +1040,17 @@ ath5k_beaconq_setup(struct ath5k_hw *ah) } static int -ath5k_beaconq_config(struct ath5k_softc *sc) +ath5k_beaconq_config(struct ath5k_hw *ah) { - struct ath5k_hw *ah = sc->ah; struct ath5k_txq_info qi; int ret; - ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi); + ret = ath5k_hw_get_tx_queueprops(ah, ah->bhalq, &qi); if (ret) goto err; - if (sc->opmode == NL80211_IFTYPE_AP || - sc->opmode == NL80211_IFTYPE_MESH_POINT) { + if (ah->opmode == NL80211_IFTYPE_AP || + ah->opmode == NL80211_IFTYPE_MESH_POINT) { /* * Always burst out beacon and CAB traffic * (aifs = cwmin = cwmax = 0) @@ -1025,7 +1058,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) qi.tqi_aifs = 0; qi.tqi_cw_min = 0; qi.tqi_cw_max = 0; - } else if (sc->opmode == NL80211_IFTYPE_ADHOC) { + } else if (ah->opmode == NL80211_IFTYPE_ADHOC) { /* * Adhoc mode; backoff between 0 and (2 * cw_min). */ @@ -1034,17 +1067,17 @@ ath5k_beaconq_config(struct ath5k_softc *sc) qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN; } - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n", qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max); - ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi); + ret = ath5k_hw_set_tx_queueprops(ah, ah->bhalq, &qi); if (ret) { - ATH5K_ERR(sc, "%s: unable to update parameters for beacon " + ATH5K_ERR(ah, "%s: unable to update parameters for beacon " "hardware queue!\n", __func__); goto err; } - ret = ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */ + ret = ath5k_hw_reset_tx_queue(ah, ah->bhalq); /* push to h/w */ if (ret) goto err; @@ -1053,7 +1086,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) if (ret) goto err; - qi.tqi_ready_time = (sc->bintval * 80) / 100; + qi.tqi_ready_time = (ah->bintval * 80) / 100; ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi); if (ret) goto err; @@ -1063,73 +1096,55 @@ err: return ret; } +/** + * ath5k_drain_tx_buffs - Empty tx buffers + * + * @ah The &struct ath5k_hw + * + * Empty tx buffers from all queues in preparation + * of a reset or during shutdown. + * + * NB: this assumes output has been stopped and + * we do not need to block ath5k_tx_tasklet + */ static void -ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq) +ath5k_drain_tx_buffs(struct ath5k_hw *ah) { + struct ath5k_txq *txq; struct ath5k_buf *bf, *bf0; + int i; - /* - * NB: this assumes output has been stopped and - * we do not need to block ath5k_tx_tasklet - */ - spin_lock_bh(&txq->lock); - list_for_each_entry_safe(bf, bf0, &txq->q, list) { - ath5k_debug_printtxbuf(sc, bf); - - ath5k_txbuf_free_skb(sc, bf); - - spin_lock_bh(&sc->txbuflock); - list_move_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - txq->txq_len--; - spin_unlock_bh(&sc->txbuflock); - } - txq->link = NULL; - txq->txq_poll_mark = false; - spin_unlock_bh(&txq->lock); -} + for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { + if (ah->txqs[i].setup) { + txq = &ah->txqs[i]; + spin_lock_bh(&txq->lock); + list_for_each_entry_safe(bf, bf0, &txq->q, list) { + ath5k_debug_printtxbuf(ah, bf); -/* - * Drain the transmit queues and reclaim resources. - */ -static void -ath5k_txq_cleanup(struct ath5k_softc *sc) -{ - struct ath5k_hw *ah = sc->ah; - unsigned int i; + ath5k_txbuf_free_skb(ah, bf); - /* XXX return value */ - if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) { - /* don't touch the hardware if marked invalid */ - ath5k_hw_stop_tx_dma(ah, sc->bhalq); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n", - ath5k_hw_get_txdp(ah, sc->bhalq)); - for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) - if (sc->txqs[i].setup) { - ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, " - "link %p\n", - sc->txqs[i].qnum, - ath5k_hw_get_txdp(ah, - sc->txqs[i].qnum), - sc->txqs[i].link); + spin_lock(&ah->txbuflock); + list_move_tail(&bf->list, &ah->txbuf); + ah->txbuf_len++; + txq->txq_len--; + spin_unlock(&ah->txbuflock); } + txq->link = NULL; + txq->txq_poll_mark = false; + spin_unlock_bh(&txq->lock); + } } - - for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) - if (sc->txqs[i].setup) - ath5k_txq_drainq(sc, &sc->txqs[i]); } static void -ath5k_txq_release(struct ath5k_softc *sc) +ath5k_txq_release(struct ath5k_hw *ah) { - struct ath5k_txq *txq = sc->txqs; + struct ath5k_txq *txq = ah->txqs; unsigned int i; - for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++) + for (i = 0; i < ARRAY_SIZE(ah->txqs); i++, txq++) if (txq->setup) { - ath5k_hw_release_tx_queue(sc->ah, txq->qnum); + ath5k_hw_release_tx_queue(ah, txq->qnum); txq->setup = false; } } @@ -1143,33 +1158,32 @@ ath5k_txq_release(struct ath5k_softc *sc) * Enable the receive h/w following a reset. */ static int -ath5k_rx_start(struct ath5k_softc *sc) +ath5k_rx_start(struct ath5k_hw *ah) { - struct ath5k_hw *ah = sc->ah; struct ath_common *common = ath5k_hw_common(ah); struct ath5k_buf *bf; int ret; common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n", + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n", common->cachelsz, common->rx_bufsize); - spin_lock_bh(&sc->rxbuflock); - sc->rxlink = NULL; - list_for_each_entry(bf, &sc->rxbuf, list) { - ret = ath5k_rxbuf_setup(sc, bf); + spin_lock_bh(&ah->rxbuflock); + ah->rxlink = NULL; + list_for_each_entry(bf, &ah->rxbuf, list) { + ret = ath5k_rxbuf_setup(ah, bf); if (ret != 0) { - spin_unlock_bh(&sc->rxbuflock); + spin_unlock_bh(&ah->rxbuflock); goto err; } } - bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); + bf = list_first_entry(&ah->rxbuf, struct ath5k_buf, list); ath5k_hw_set_rxdp(ah, bf->daddr); - spin_unlock_bh(&sc->rxbuflock); + spin_unlock_bh(&ah->rxbuflock); ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ - ath5k_mode_setup(sc, NULL); /* set filters, etc. */ + ath5k_update_bssid_mask_and_opmode(ah, NULL); /* set filters, etc. */ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ return 0; @@ -1178,25 +1192,26 @@ err: } /* - * Disable the receive h/w in preparation for a reset. + * Disable the receive logic on PCU (DRU) + * In preparation for a shutdown. + * + * Note: Doesn't stop rx DMA, ath5k_hw_dma_stop + * does. */ static void -ath5k_rx_stop(struct ath5k_softc *sc) +ath5k_rx_stop(struct ath5k_hw *ah) { - struct ath5k_hw *ah = sc->ah; - ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ - ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ + ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ - ath5k_debug_printrxbuffs(sc, ah); + ath5k_debug_printrxbuffs(ah); } static unsigned int -ath5k_rx_decrypted(struct ath5k_softc *sc, struct sk_buff *skb, +ath5k_rx_decrypted(struct ath5k_hw *ah, struct sk_buff *skb, struct ath5k_rx_status *rs) { - struct ath5k_hw *ah = sc->ah; struct ath_common *common = ath5k_hw_common(ah); struct ieee80211_hdr *hdr = (void *)skb->data; unsigned int keyix, hlen; @@ -1223,27 +1238,24 @@ ath5k_rx_decrypted(struct ath5k_softc *sc, struct sk_buff *skb, static void -ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, +ath5k_check_ibss_tsf(struct ath5k_hw *ah, struct sk_buff *skb, struct ieee80211_rx_status *rxs) { - struct ath_common *common = ath5k_hw_common(sc->ah); u64 tsf, bc_tstamp; u32 hw_tu; struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; - if (ieee80211_is_beacon(mgmt->frame_control) && - le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS && - memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) { + if (le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS) { /* * Received an IBSS beacon with the same BSSID. Hardware *must* * have updated the local TSF. We have to work around various * hardware bugs, though... */ - tsf = ath5k_hw_get_tsf64(sc->ah); + tsf = ath5k_hw_get_tsf64(ah); bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp); hw_tu = TSF_TO_TU(tsf); - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "beacon %llx mactime %llx (diff %lld) tsf now %llx\n", (unsigned long long)bc_tstamp, (unsigned long long)rxs->mactime, @@ -1262,7 +1274,7 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, * received, not like mac80211 which defines it at the start. */ if (bc_tstamp > rxs->mactime) { - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "fixing mactime from %llx to %llx\n", (unsigned long long)rxs->mactime, (unsigned long long)tsf); @@ -1275,53 +1287,34 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb, * beacons. This also takes care of synchronizing beacon sending * times with other stations. */ - if (hw_tu >= sc->nexttbtt) - ath5k_beacon_update_timers(sc, bc_tstamp); + if (hw_tu >= ah->nexttbtt) + ath5k_beacon_update_timers(ah, bc_tstamp); /* Check if the beacon timers are still correct, because a TSF * update might have created a window between them - for a * longer description see the comment of this function: */ - if (!ath5k_hw_check_beacon_timers(sc->ah, sc->bintval)) { - ath5k_beacon_update_timers(sc, bc_tstamp); - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + if (!ath5k_hw_check_beacon_timers(ah, ah->bintval)) { + ath5k_beacon_update_timers(ah, bc_tstamp); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "fixed beacon timers after beacon receive\n"); } } } -static void -ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi) -{ - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; - struct ath5k_hw *ah = sc->ah; - struct ath_common *common = ath5k_hw_common(ah); - - /* only beacons from our BSSID */ - if (!ieee80211_is_beacon(mgmt->frame_control) || - memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0) - return; - - ewma_add(&ah->ah_beacon_rssi_avg, rssi); - - /* in IBSS mode we should keep RSSI statistics per neighbour */ - /* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */ -} - /* * Compute padding position. skb must contain an IEEE 802.11 frame */ static int ath5k_common_padpos(struct sk_buff *skb) { - struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; __le16 frame_control = hdr->frame_control; int padpos = 24; - if (ieee80211_has_a4(frame_control)) { + if (ieee80211_has_a4(frame_control)) padpos += ETH_ALEN; - } - if (ieee80211_is_data_qos(frame_control)) { + + if (ieee80211_is_data_qos(frame_control)) padpos += IEEE80211_QOS_CTL_LEN; - } return padpos; } @@ -1335,13 +1328,13 @@ static int ath5k_add_padding(struct sk_buff *skb) int padpos = ath5k_common_padpos(skb); int padsize = padpos & 3; - if (padsize && skb->len>padpos) { + if (padsize && skb->len > padpos) { if (skb_headroom(skb) < padsize) return -1; skb_push(skb, padsize); - memmove(skb->data, skb->data+padsize, padpos); + memmove(skb->data, skb->data + padsize, padpos); return padsize; } @@ -1366,7 +1359,7 @@ static int ath5k_remove_padding(struct sk_buff *skb) int padpos = ath5k_common_padpos(skb); int padsize = padpos & 3; - if (padsize && skb->len>=padpos+padsize) { + if (padsize && skb->len >= padpos + padsize) { memmove(skb->data + padsize, skb->data, padpos); skb_pull(skb, padsize); return padsize; @@ -1376,10 +1369,11 @@ static int ath5k_remove_padding(struct sk_buff *skb) } static void -ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb, +ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb, struct ath5k_rx_status *rs) { struct ieee80211_rx_status *rxs; + struct ath_common *common = ath5k_hw_common(ah); ath5k_remove_padding(skb); @@ -1397,49 +1391,50 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb, * 15bit only. that means TSF extension has to be done within * 32768usec (about 32ms). it might be necessary to move this to * the interrupt handler, like it is done in madwifi. - * - * Unfortunately we don't know when the hardware takes the rx - * timestamp (beginning of phy frame, data frame, end of rx?). - * The only thing we know is that it is hardware specific... - * On AR5213 it seems the rx timestamp is at the end of the - * frame, but i'm not sure. - * - * NOTE: mac80211 defines mactime at the beginning of the first - * data symbol. Since we don't have any time references it's - * impossible to comply to that. This affects IBSS merge only - * right now, so it's not too bad... */ - rxs->mactime = ath5k_extend_tsf(sc->ah, rs->rs_tstamp); - rxs->flag |= RX_FLAG_TSFT; + rxs->mactime = ath5k_extend_tsf(ah, rs->rs_tstamp); + rxs->flag |= RX_FLAG_MACTIME_END; - rxs->freq = sc->curchan->center_freq; - rxs->band = sc->curband->band; + rxs->freq = ah->curchan->center_freq; + rxs->band = ah->curchan->band; - rxs->signal = sc->ah->ah_noise_floor + rs->rs_rssi; + rxs->signal = ah->ah_noise_floor + rs->rs_rssi; rxs->antenna = rs->rs_antenna; if (rs->rs_antenna > 0 && rs->rs_antenna < 5) - sc->stats.antenna_rx[rs->rs_antenna]++; + ah->stats.antenna_rx[rs->rs_antenna]++; else - sc->stats.antenna_rx[0]++; /* invalid */ + ah->stats.antenna_rx[0]++; /* invalid */ - rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs->rs_rate); - rxs->flag |= ath5k_rx_decrypted(sc, skb, rs); + rxs->rate_idx = ath5k_hw_to_driver_rix(ah, rs->rs_rate); + rxs->flag |= ath5k_rx_decrypted(ah, skb, rs); + switch (ah->ah_bwmode) { + case AR5K_BWMODE_5MHZ: + rxs->flag |= RX_FLAG_5MHZ; + break; + case AR5K_BWMODE_10MHZ: + rxs->flag |= RX_FLAG_10MHZ; + break; + default: + break; + } if (rxs->rate_idx >= 0 && rs->rs_rate == - sc->curband->bitrates[rxs->rate_idx].hw_value_short) + ah->sbands[ah->curchan->band].bitrates[rxs->rate_idx].hw_value_short) rxs->flag |= RX_FLAG_SHORTPRE; - ath5k_debug_dump_skb(sc, skb, "RX ", 0); + trace_ath5k_rx(ah, skb); - ath5k_update_beacon_rssi(sc, skb, rs->rs_rssi); + if (ath_is_mybeacon(common, (struct ieee80211_hdr *)skb->data)) { + ewma_add(&ah->ah_beacon_rssi_avg, rs->rs_rssi); - /* check beacons in IBSS mode */ - if (sc->opmode == NL80211_IFTYPE_ADHOC) - ath5k_check_ibss_tsf(sc, skb, rxs); + /* check beacons in IBSS mode */ + if (ah->opmode == NL80211_IFTYPE_ADHOC) + ath5k_check_ibss_tsf(ah, skb, rxs); + } - ieee80211_rx(sc->hw, skb); + ieee80211_rx(ah->hw, skb); } /** ath5k_frame_receive_ok() - Do we want to receive this frame or not? @@ -1448,20 +1443,20 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb, * statistics. Return true if we want this frame, false if not. */ static bool -ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs) +ath5k_receive_frame_ok(struct ath5k_hw *ah, struct ath5k_rx_status *rs) { - sc->stats.rx_all_count++; - sc->stats.rx_bytes_count += rs->rs_datalen; + ah->stats.rx_all_count++; + ah->stats.rx_bytes_count += rs->rs_datalen; if (unlikely(rs->rs_status)) { if (rs->rs_status & AR5K_RXERR_CRC) - sc->stats.rxerr_crc++; + ah->stats.rxerr_crc++; if (rs->rs_status & AR5K_RXERR_FIFO) - sc->stats.rxerr_fifo++; + ah->stats.rxerr_fifo++; if (rs->rs_status & AR5K_RXERR_PHY) { - sc->stats.rxerr_phy++; + ah->stats.rxerr_phy++; if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32) - sc->stats.rxerr_phy_code[rs->rs_phyerr]++; + ah->stats.rxerr_phy_code[rs->rs_phyerr]++; return false; } if (rs->rs_status & AR5K_RXERR_DECRYPT) { @@ -1475,13 +1470,13 @@ ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs) * * XXX do key cache faulting */ - sc->stats.rxerr_decrypt++; + ah->stats.rxerr_decrypt++; if (rs->rs_keyix == AR5K_RXKEYIX_INVALID && !(rs->rs_status & AR5K_RXERR_CRC)) return true; } if (rs->rs_status & AR5K_RXERR_MIC) { - sc->stats.rxerr_mic++; + ah->stats.rxerr_mic++; return true; } @@ -1491,51 +1486,66 @@ ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs) } if (unlikely(rs->rs_more)) { - sc->stats.rxerr_jumbo++; + ah->stats.rxerr_jumbo++; return false; } return true; } static void +ath5k_set_current_imask(struct ath5k_hw *ah) +{ + enum ath5k_int imask; + unsigned long flags; + + spin_lock_irqsave(&ah->irqlock, flags); + imask = ah->imask; + if (ah->rx_pending) + imask &= ~AR5K_INT_RX_ALL; + if (ah->tx_pending) + imask &= ~AR5K_INT_TX_ALL; + ath5k_hw_set_imr(ah, imask); + spin_unlock_irqrestore(&ah->irqlock, flags); +} + +static void ath5k_tasklet_rx(unsigned long data) { struct ath5k_rx_status rs = {}; struct sk_buff *skb, *next_skb; dma_addr_t next_skb_addr; - struct ath5k_softc *sc = (void *)data; - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = (void *)data; struct ath_common *common = ath5k_hw_common(ah); struct ath5k_buf *bf; struct ath5k_desc *ds; int ret; - spin_lock(&sc->rxbuflock); - if (list_empty(&sc->rxbuf)) { - ATH5K_WARN(sc, "empty rx buf pool\n"); + spin_lock(&ah->rxbuflock); + if (list_empty(&ah->rxbuf)) { + ATH5K_WARN(ah, "empty rx buf pool\n"); goto unlock; } do { - bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); + bf = list_first_entry(&ah->rxbuf, struct ath5k_buf, list); BUG_ON(bf->skb == NULL); skb = bf->skb; ds = bf->desc; /* bail if HW is still using self-linked descriptor */ - if (ath5k_hw_get_rxdp(sc->ah) == bf->daddr) + if (ath5k_hw_get_rxdp(ah) == bf->daddr) break; - ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs); + ret = ah->ah_proc_rx_desc(ah, ds, &rs); if (unlikely(ret == -EINPROGRESS)) break; else if (unlikely(ret)) { - ATH5K_ERR(sc, "error in processing rx descriptor\n"); - sc->stats.rxerr_proc++; + ATH5K_ERR(ah, "error in processing rx descriptor\n"); + ah->stats.rxerr_proc++; break; } - if (ath5k_receive_frame_ok(sc, &rs)) { - next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr); + if (ath5k_receive_frame_ok(ah, &rs)) { + next_skb = ath5k_rx_skb_alloc(ah, &next_skb_addr); /* * If we can't replace bf->skb with a new skb under @@ -1544,22 +1554,24 @@ ath5k_tasklet_rx(unsigned long data) if (!next_skb) goto next; - pci_unmap_single(sc->pdev, bf->skbaddr, + dma_unmap_single(ah->dev, bf->skbaddr, common->rx_bufsize, - PCI_DMA_FROMDEVICE); + DMA_FROM_DEVICE); skb_put(skb, rs.rs_datalen); - ath5k_receive_frame(sc, skb, &rs); + ath5k_receive_frame(ah, skb, &rs); bf->skb = next_skb; bf->skbaddr = next_skb_addr; } next: - list_move_tail(&bf->list, &sc->rxbuf); - } while (ath5k_rxbuf_setup(sc, bf) == 0); + list_move_tail(&bf->list, &ah->rxbuf); + } while (ath5k_rxbuf_setup(ah, bf) == 0); unlock: - spin_unlock(&sc->rxbuflock); + spin_unlock(&ah->rxbuflock); + ah->rx_pending = false; + ath5k_set_current_imask(ah); } @@ -1567,15 +1579,16 @@ unlock: * TX Handling * \*************/ -static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ath5k_txq *txq) +void +ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ath5k_txq *txq, struct ieee80211_tx_control *control) { - struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = hw->priv; struct ath5k_buf *bf; unsigned long flags; int padsize; - ath5k_debug_dump_skb(sc, skb, "TX ", 1); + trace_ath5k_tx(ah, skb, txq); /* * The hardware expects the header padded to 4 byte boundaries. @@ -1583,86 +1596,94 @@ static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, */ padsize = ath5k_add_padding(skb); if (padsize < 0) { - ATH5K_ERR(sc, "tx hdrlen not %%4: not enough" + ATH5K_ERR(ah, "tx hdrlen not %%4: not enough" " headroom to pad"); goto drop_packet; } - if (txq->txq_len >= ATH5K_TXQ_LEN_MAX) + if (txq->txq_len >= txq->txq_max && + txq->qnum <= AR5K_TX_QUEUE_ID_DATA_MAX) ieee80211_stop_queue(hw, txq->qnum); - spin_lock_irqsave(&sc->txbuflock, flags); - if (list_empty(&sc->txbuf)) { - ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); - spin_unlock_irqrestore(&sc->txbuflock, flags); + spin_lock_irqsave(&ah->txbuflock, flags); + if (list_empty(&ah->txbuf)) { + ATH5K_ERR(ah, "no further txbuf available, dropping packet\n"); + spin_unlock_irqrestore(&ah->txbuflock, flags); ieee80211_stop_queues(hw); goto drop_packet; } - bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); + bf = list_first_entry(&ah->txbuf, struct ath5k_buf, list); list_del(&bf->list); - sc->txbuf_len--; - if (list_empty(&sc->txbuf)) + ah->txbuf_len--; + if (list_empty(&ah->txbuf)) ieee80211_stop_queues(hw); - spin_unlock_irqrestore(&sc->txbuflock, flags); + spin_unlock_irqrestore(&ah->txbuflock, flags); bf->skb = skb; - if (ath5k_txbuf_setup(sc, bf, txq, padsize)) { + if (ath5k_txbuf_setup(ah, bf, txq, padsize, control)) { bf->skb = NULL; - spin_lock_irqsave(&sc->txbuflock, flags); - list_add_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; - spin_unlock_irqrestore(&sc->txbuflock, flags); + spin_lock_irqsave(&ah->txbuflock, flags); + list_add_tail(&bf->list, &ah->txbuf); + ah->txbuf_len++; + spin_unlock_irqrestore(&ah->txbuflock, flags); goto drop_packet; } - return NETDEV_TX_OK; + return; drop_packet: - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + ieee80211_free_txskb(hw, skb); } static void -ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb, - struct ath5k_tx_status *ts) +ath5k_tx_frame_completed(struct ath5k_hw *ah, struct sk_buff *skb, + struct ath5k_txq *txq, struct ath5k_tx_status *ts, + struct ath5k_buf *bf) { struct ieee80211_tx_info *info; + u8 tries[3]; int i; + int size = 0; - sc->stats.tx_all_count++; - sc->stats.tx_bytes_count += skb->len; + ah->stats.tx_all_count++; + ah->stats.tx_bytes_count += skb->len; info = IEEE80211_SKB_CB(skb); + size = min_t(int, sizeof(info->status.rates), sizeof(bf->rates)); + memcpy(info->status.rates, bf->rates, size); + + tries[0] = info->status.rates[0].count; + tries[1] = info->status.rates[1].count; + tries[2] = info->status.rates[2].count; + ieee80211_tx_info_clear_status(info); - for (i = 0; i < 4; i++) { + + for (i = 0; i < ts->ts_final_idx; i++) { struct ieee80211_tx_rate *r = &info->status.rates[i]; - if (ts->ts_rate[i]) { - r->idx = ath5k_hw_to_driver_rix(sc, ts->ts_rate[i]); - r->count = ts->ts_retry[i]; - } else { - r->idx = -1; - r->count = 0; - } + r->count = tries[i]; } - /* count the successful attempt as well */ - info->status.rates[ts->ts_final_idx].count++; + info->status.rates[ts->ts_final_idx].count = ts->ts_final_retry; + info->status.rates[ts->ts_final_idx + 1].idx = -1; if (unlikely(ts->ts_status)) { - sc->stats.ack_fail++; + ah->stats.ack_fail++; if (ts->ts_status & AR5K_TXERR_FILT) { info->flags |= IEEE80211_TX_STAT_TX_FILTERED; - sc->stats.txerr_filt++; + ah->stats.txerr_filt++; } if (ts->ts_status & AR5K_TXERR_XRETRY) - sc->stats.txerr_retry++; + ah->stats.txerr_retry++; if (ts->ts_status & AR5K_TXERR_FIFO) - sc->stats.txerr_fifo++; + ah->stats.txerr_fifo++; } else { info->flags |= IEEE80211_TX_STAT_ACK; info->status.ack_signal = ts->ts_rssi; + + /* count the successful attempt as well */ + info->status.rates[ts->ts_final_idx].count++; } /* @@ -1672,15 +1693,16 @@ ath5k_tx_frame_completed(struct ath5k_softc *sc, struct sk_buff *skb, ath5k_remove_padding(skb); if (ts->ts_antenna > 0 && ts->ts_antenna < 5) - sc->stats.antenna_tx[ts->ts_antenna]++; + ah->stats.antenna_tx[ts->ts_antenna]++; else - sc->stats.antenna_tx[0]++; /* invalid */ + ah->stats.antenna_tx[0]++; /* invalid */ - ieee80211_tx_status(sc->hw, skb); + trace_ath5k_tx_complete(ah, skb, txq, ts); + ieee80211_tx_status(ah->hw, skb); } static void -ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) +ath5k_tx_processq(struct ath5k_hw *ah, struct ath5k_txq *txq) { struct ath5k_tx_status ts = {}; struct ath5k_buf *bf, *bf0; @@ -1697,11 +1719,11 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) if (bf->skb != NULL) { ds = bf->desc; - ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); + ret = ah->ah_proc_tx_desc(ah, ds, &ts); if (unlikely(ret == -EINPROGRESS)) break; else if (unlikely(ret)) { - ATH5K_ERR(sc, + ATH5K_ERR(ah, "error %d while processing " "queue %u\n", ret, txq->qnum); break; @@ -1709,9 +1731,10 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) skb = bf->skb; bf->skb = NULL; - pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, - PCI_DMA_TODEVICE); - ath5k_tx_frame_completed(sc, skb, &ts); + + dma_unmap_single(ah->dev, bf->skbaddr, skb->len, + DMA_TO_DEVICE); + ath5k_tx_frame_completed(ah, skb, txq, &ts, bf); } /* @@ -1720,28 +1743,31 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) * host memory and moved on. * Always keep the last descriptor to avoid HW races... */ - if (ath5k_hw_get_txdp(sc->ah, txq->qnum) != bf->daddr) { - spin_lock(&sc->txbuflock); - list_move_tail(&bf->list, &sc->txbuf); - sc->txbuf_len++; + if (ath5k_hw_get_txdp(ah, txq->qnum) != bf->daddr) { + spin_lock(&ah->txbuflock); + list_move_tail(&bf->list, &ah->txbuf); + ah->txbuf_len++; txq->txq_len--; - spin_unlock(&sc->txbuflock); + spin_unlock(&ah->txbuflock); } } spin_unlock(&txq->lock); if (txq->txq_len < ATH5K_TXQ_LEN_LOW && txq->qnum < 4) - ieee80211_wake_queue(sc->hw, txq->qnum); + ieee80211_wake_queue(ah->hw, txq->qnum); } static void ath5k_tasklet_tx(unsigned long data) { int i; - struct ath5k_softc *sc = (void *)data; + struct ath5k_hw *ah = (void *)data; + + for (i = 0; i < AR5K_NUM_TX_QUEUES; i++) + if (ah->txqs[i].setup && (ah->ah_txq_isr_txok_all & BIT(i))) + ath5k_tx_processq(ah, &ah->txqs[i]); - for (i=0; i < AR5K_NUM_TX_QUEUES; i++) - if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i))) - ath5k_tx_processq(sc, &sc->txqs[i]); + ah->tx_pending = false; + ath5k_set_current_imask(ah); } @@ -1753,24 +1779,26 @@ ath5k_tasklet_tx(unsigned long data) * Setup the beacon frame for transmit. */ static int -ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) +ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) { struct sk_buff *skb = bf->skb; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ath5k_hw *ah = sc->ah; struct ath5k_desc *ds; int ret = 0; u8 antenna; u32 flags; const int padsize = 0; - bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len, - PCI_DMA_TODEVICE); - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] " + bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len, + DMA_TO_DEVICE); + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] " "skbaddr %llx\n", skb, skb->data, skb->len, (unsigned long long)bf->skbaddr); - if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) { - ATH5K_ERR(sc, "beacon DMA mapping failed\n"); + + if (dma_mapping_error(ah->dev, bf->skbaddr)) { + ATH5K_ERR(ah, "beacon DMA mapping failed\n"); + dev_kfree_skb_any(skb); + bf->skb = NULL; return -EIO; } @@ -1778,7 +1806,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) antenna = ah->ah_tx_ant; flags = AR5K_TXDESC_NOACK; - if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) { + if (ah->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) { ds->ds_link = bf->daddr; /* self-linked */ flags |= AR5K_TXDESC_VEOL; } else @@ -1790,7 +1818,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) * 4 beacons to make sure everybody hears our AP. * When a client tries to associate, hw will keep * track of the tx antenna to be used for this client - * automaticaly, based on ACKed packets. + * automatically, based on ACKed packets. * * Note: AP still listens and transmits RTS on the * default antenna which is supposed to be an omni. @@ -1803,7 +1831,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) * on all of them. */ if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP) - antenna = sc->bsent & 4 ? 2 : 1; + antenna = ah->bsent & 4 ? 2 : 1; /* FIXME: If we are in g mode and rate is a CCK rate @@ -1812,8 +1840,9 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ds->ds_data = bf->skbaddr; ret = ah->ah_setup_tx_desc(ah, ds, skb->len, ieee80211_get_hdrlen_from_skb(skb), padsize, - AR5K_PKT_TYPE_BEACON, (sc->power_level * 2), - ieee80211_get_tx_rate(sc->hw, info)->hw_value, + AR5K_PKT_TYPE_BEACON, + (ah->ah_txpower.txp_requested * 2), + ieee80211_get_tx_rate(ah->hw, info)->hw_value, 1, AR5K_TXKEYIX_INVALID, antenna, flags, 0, 0); if (ret) @@ -1821,7 +1850,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) return 0; err_unmap: - pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); + dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE); return ret; } @@ -1832,12 +1861,12 @@ err_unmap: * * Called with the beacon lock. */ -static int +int ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { int ret; - struct ath5k_softc *sc = hw->priv; - struct ath5k_vif *avf = (void *)vif->drv_priv; + struct ath5k_hw *ah = hw->priv; + struct ath5k_vif *avf; struct sk_buff *skb; if (WARN_ON(!vif)) { @@ -1852,13 +1881,10 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) goto out; } - ath5k_debug_dump_skb(sc, skb, "BC ", 1); - - ath5k_txbuf_free_skb(sc, avf->bbuf); + avf = (void *)vif->drv_priv; + ath5k_txbuf_free_skb(ah, avf->bbuf); avf->bbuf->skb = skb; - ret = ath5k_beacon_setup(sc, avf->bbuf); - if (ret) - avf->bbuf->skb = NULL; + ret = ath5k_beacon_setup(ah, avf->bbuf); out: return ret; } @@ -1872,15 +1898,15 @@ out: * or user context from ath5k_beacon_config. */ static void -ath5k_beacon_send(struct ath5k_softc *sc) +ath5k_beacon_send(struct ath5k_hw *ah) { - struct ath5k_hw *ah = sc->ah; struct ieee80211_vif *vif; struct ath5k_vif *avf; struct ath5k_buf *bf; struct sk_buff *skb; + int err; - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n"); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n"); /* * Check if the previous beacon has gone out. If @@ -1889,81 +1915,94 @@ ath5k_beacon_send(struct ath5k_softc *sc) * indicate a problem and should not occur. If we * miss too many consecutive beacons reset the device. */ - if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) { - sc->bmisscount++; - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, - "missed %u consecutive beacons\n", sc->bmisscount); - if (sc->bmisscount > 10) { /* NB: 10 is a guess */ - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + if (unlikely(ath5k_hw_num_tx_pending(ah, ah->bhalq) != 0)) { + ah->bmisscount++; + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, + "missed %u consecutive beacons\n", ah->bmisscount); + if (ah->bmisscount > 10) { /* NB: 10 is a guess */ + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "stuck beacon time (%u missed)\n", - sc->bmisscount); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + ah->bmisscount); + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "stuck beacon, resetting\n"); - ieee80211_queue_work(sc->hw, &sc->reset_work); + ieee80211_queue_work(ah->hw, &ah->reset_work); } return; } - if (unlikely(sc->bmisscount != 0)) { - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + if (unlikely(ah->bmisscount != 0)) { + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "resume beacon xmit after %u misses\n", - sc->bmisscount); - sc->bmisscount = 0; + ah->bmisscount); + ah->bmisscount = 0; } - if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) { + if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs + + ah->num_mesh_vifs > 1) || + ah->opmode == NL80211_IFTYPE_MESH_POINT) { u64 tsf = ath5k_hw_get_tsf64(ah); u32 tsftu = TSF_TO_TU(tsf); - int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval; - vif = sc->bslot[(slot + 1) % ATH_BCBUF]; - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + int slot = ((tsftu % ah->bintval) * ATH_BCBUF) / ah->bintval; + vif = ah->bslot[(slot + 1) % ATH_BCBUF]; + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "tsf %llx tsftu %x intval %u slot %u vif %p\n", - (unsigned long long)tsf, tsftu, sc->bintval, slot, vif); + (unsigned long long)tsf, tsftu, ah->bintval, slot, vif); } else /* only one interface */ - vif = sc->bslot[0]; + vif = ah->bslot[0]; if (!vif) return; avf = (void *)vif->drv_priv; bf = avf->bbuf; - if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION || - sc->opmode == NL80211_IFTYPE_MONITOR)) { - ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); - return; - } /* * Stop any current dma and put the new frame on the queue. * This should never fail since we check above that no frames * are still pending on the queue. */ - if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) { - ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq); + if (unlikely(ath5k_hw_stop_beacon_queue(ah, ah->bhalq))) { + ATH5K_WARN(ah, "beacon queue %u didn't start/stop ?\n", ah->bhalq); /* NB: hw still stops DMA, so proceed */ } - /* refresh the beacon for AP mode */ - if (sc->opmode == NL80211_IFTYPE_AP) - ath5k_beacon_update(sc->hw, vif); + /* refresh the beacon for AP or MESH mode */ + if (ah->opmode == NL80211_IFTYPE_AP || + ah->opmode == NL80211_IFTYPE_MESH_POINT) { + err = ath5k_beacon_update(ah->hw, vif); + if (err) + return; + } + + if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION || + ah->opmode == NL80211_IFTYPE_MONITOR)) { + ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb); + return; + } + + trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]); - ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); - ath5k_hw_start_tx_dma(ah, sc->bhalq); - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", - sc->bhalq, (unsigned long long)bf->daddr, bf->desc); + ath5k_hw_set_txdp(ah, ah->bhalq, bf->daddr); + ath5k_hw_start_tx_dma(ah, ah->bhalq); + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", + ah->bhalq, (unsigned long long)bf->daddr, bf->desc); - skb = ieee80211_get_buffered_bc(sc->hw, vif); + skb = ieee80211_get_buffered_bc(ah->hw, vif); while (skb) { - ath5k_tx_queue(sc->hw, skb, sc->cabq); - skb = ieee80211_get_buffered_bc(sc->hw, vif); + ath5k_tx_queue(ah->hw, skb, ah->cabq, NULL); + + if (ah->cabq->txq_len >= ah->cabq->txq_max) + break; + + skb = ieee80211_get_buffered_bc(ah->hw, vif); } - sc->bsent++; + ah->bsent++; } /** * ath5k_beacon_update_timers - update beacon timers * - * @sc: struct ath5k_softc pointer we are operating on + * @ah: struct ath5k_hw pointer we are operating on * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a * beacon timer update based on the current HW TSF. * @@ -1976,18 +2015,18 @@ ath5k_beacon_send(struct ath5k_softc *sc) * when we otherwise know we have to update the timers, but we keep it in this * function to have it all together in one place. */ -static void -ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) +void +ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf) { - struct ath5k_hw *ah = sc->ah; u32 nexttbtt, intval, hw_tu, bc_tu; u64 hw_tsf; - intval = sc->bintval & AR5K_BEACON_PERIOD; - if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) { + intval = ah->bintval & AR5K_BEACON_PERIOD; + if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs + + ah->num_mesh_vifs > 1) { intval /= ATH_BCBUF; /* staggered multi-bss beacons */ if (intval < 15) - ATH5K_WARN(sc, "intval %u is too low, min 15\n", + ATH5K_WARN(ah, "intval %u is too low, min 15\n", intval); } if (WARN_ON(!intval)) @@ -2000,9 +2039,9 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) hw_tsf = ath5k_hw_get_tsf64(ah); hw_tu = TSF_TO_TU(hw_tsf); -#define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3 +#define FUDGE (AR5K_TUNE_SW_BEACON_RESP + 3) /* We use FUDGE to make sure the next TBTT is ahead of the current TU. - * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer + * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer * configuration we need to make sure it is bigger than that. */ if (bc_tsf == -1) { @@ -2020,13 +2059,13 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) intval |= AR5K_BEACON_RESET_TSF; } else if (bc_tsf > hw_tsf) { /* - * beacon received, SW merge happend but HW TSF not yet updated. + * beacon received, SW merge happened but HW TSF not yet updated. * not possible to reconfigure timers yet, but next time we * receive a beacon with the same BSSID, the hardware will * automatically update the TSF and then we need to reconfigure * the timers. */ - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "need to wait for HW TSF sync\n"); return; } else { @@ -2041,30 +2080,30 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) } #undef FUDGE - sc->nexttbtt = nexttbtt; + ah->nexttbtt = nexttbtt; intval |= AR5K_BEACON_ENA; - ath5k_hw_init_beacon(ah, nexttbtt, intval); + ath5k_hw_init_beacon_timers(ah, nexttbtt, intval); /* * debugging output last in order to preserve the time critical aspect * of this function */ if (bc_tsf == -1) - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "reconfigured timers based on HW TSF\n"); else if (bc_tsf == 0) - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "reset HW TSF and timers\n"); else - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "updated timers based on beacon TSF\n"); - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n", (unsigned long long) bc_tsf, (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt); - ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n", + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "intval %u %s %s\n", intval & AR5K_BEACON_PERIOD, intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "", intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : ""); @@ -2073,22 +2112,19 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) /** * ath5k_beacon_config - Configure the beacon queues and interrupts * - * @sc: struct ath5k_softc pointer we are operating on + * @ah: struct ath5k_hw pointer we are operating on * * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA * interrupts to detect TSF updates only. */ -static void -ath5k_beacon_config(struct ath5k_softc *sc) +void +ath5k_beacon_config(struct ath5k_hw *ah) { - struct ath5k_hw *ah = sc->ah; - unsigned long flags; - - spin_lock_irqsave(&sc->block, flags); - sc->bmisscount = 0; - sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); + spin_lock_bh(&ah->block); + ah->bmisscount = 0; + ah->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); - if (sc->enable_beacon) { + if (ah->enable_beacon) { /* * In IBSS mode we use a self-linked tx descriptor and let the * hardware send the beacons automatically. We have to load it @@ -2096,50 +2132,50 @@ ath5k_beacon_config(struct ath5k_softc *sc) * We use the SWBA interrupt only to keep track of the beacon * timers in order to detect automatic TSF updates. */ - ath5k_beaconq_config(sc); + ath5k_beaconq_config(ah); - sc->imask |= AR5K_INT_SWBA; + ah->imask |= AR5K_INT_SWBA; - if (sc->opmode == NL80211_IFTYPE_ADHOC) { + if (ah->opmode == NL80211_IFTYPE_ADHOC) { if (ath5k_hw_hasveol(ah)) - ath5k_beacon_send(sc); + ath5k_beacon_send(ah); } else - ath5k_beacon_update_timers(sc, -1); + ath5k_beacon_update_timers(ah, -1); } else { - ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq); + ath5k_hw_stop_beacon_queue(ah, ah->bhalq); } - ath5k_hw_set_imr(ah, sc->imask); + ath5k_hw_set_imr(ah, ah->imask); mmiowb(); - spin_unlock_irqrestore(&sc->block, flags); + spin_unlock_bh(&ah->block); } static void ath5k_tasklet_beacon(unsigned long data) { - struct ath5k_softc *sc = (struct ath5k_softc *) data; + struct ath5k_hw *ah = (struct ath5k_hw *) data; /* * Software beacon alert--time to send a beacon. * * In IBSS mode we use this interrupt just to * keep track of the next TBTT (target beacon - * transmission time) in order to detect wether + * transmission time) in order to detect whether * automatic TSF updates happened. */ - if (sc->opmode == NL80211_IFTYPE_ADHOC) { - /* XXX: only if VEOL suppported */ - u64 tsf = ath5k_hw_get_tsf64(sc->ah); - sc->nexttbtt += sc->bintval; - ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + if (ah->opmode == NL80211_IFTYPE_ADHOC) { + /* XXX: only if VEOL supported */ + u64 tsf = ath5k_hw_get_tsf64(ah); + ah->nexttbtt += ah->bintval; + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "SWBA nexttbtt: %x hw_tu: %x " "TSF: %llx\n", - sc->nexttbtt, + ah->nexttbtt, TSF_TO_TU(tsf), (unsigned long long) tsf); } else { - spin_lock(&sc->block); - ath5k_beacon_send(sc); - spin_unlock(&sc->block); + spin_lock(&ah->block); + ath5k_beacon_send(ah); + spin_unlock(&ah->block); } } @@ -2152,102 +2188,183 @@ static void ath5k_intr_calibration_poll(struct ath5k_hw *ah) { if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) && - !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) { - /* run ANI only when full calibration is not active */ + !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) { + + /* Run ANI only when calibration is not active */ + ah->ah_cal_next_ani = jiffies + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI); - tasklet_schedule(&ah->ah_sc->ani_tasklet); + tasklet_schedule(&ah->ani_tasklet); - } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) { - ah->ah_cal_next_full = jiffies + - msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); - tasklet_schedule(&ah->ah_sc->calib); + } else if (time_is_before_eq_jiffies(ah->ah_cal_next_short) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) { + + /* Run calibration only when another calibration + * is not running. + * + * Note: This is for both full/short calibration, + * if it's time for a full one, ath5k_calibrate_work will deal + * with it. */ + + ah->ah_cal_next_short = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT); + ieee80211_queue_work(ah->hw, &ah->calib_work); } /* we could use SWI to generate enough interrupts to meet our * calibration interval requirements, if necessary: * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */ } +static void +ath5k_schedule_rx(struct ath5k_hw *ah) +{ + ah->rx_pending = true; + tasklet_schedule(&ah->rxtq); +} + +static void +ath5k_schedule_tx(struct ath5k_hw *ah) +{ + ah->tx_pending = true; + tasklet_schedule(&ah->txtq); +} + static irqreturn_t ath5k_intr(int irq, void *dev_id) { - struct ath5k_softc *sc = dev_id; - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = dev_id; enum ath5k_int status; unsigned int counter = 1000; - if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) || - !ath5k_hw_is_intr_pending(ah))) + + /* + * If hw is not ready (or detached) and we get an + * interrupt, or if we have no interrupts pending + * (that means it's not for us) skip it. + * + * NOTE: Group 0/1 PCI interface registers are not + * supported on WiSOCs, so we can't check for pending + * interrupts (ISR belongs to another register group + * so we are ok). + */ + if (unlikely(test_bit(ATH_STAT_INVALID, ah->status) || + ((ath5k_get_bus_type(ah) != ATH_AHB) && + !ath5k_hw_is_intr_pending(ah)))) return IRQ_NONE; + /** Main loop **/ do { - ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ - ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n", - status, sc->imask); + ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ + + ATH5K_DBG(ah, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n", + status, ah->imask); + + /* + * Fatal hw error -> Log and reset + * + * Fatal errors are unrecoverable so we have to + * reset the card. These errors include bus and + * dma errors. + */ if (unlikely(status & AR5K_INT_FATAL)) { - /* - * Fatal errors are unrecoverable. - * Typically these are caused by DMA errors. - */ - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "fatal int, resetting\n"); - ieee80211_queue_work(sc->hw, &sc->reset_work); + ieee80211_queue_work(ah->hw, &ah->reset_work); + + /* + * RX Overrun -> Count and reset if needed + * + * Receive buffers are full. Either the bus is busy or + * the CPU is not fast enough to process all received + * frames. + */ } else if (unlikely(status & AR5K_INT_RXORN)) { + /* - * Receive buffers are full. Either the bus is busy or - * the CPU is not fast enough to process all received - * frames. * Older chipsets need a reset to come out of this * condition, but we treat it as RX for newer chips. - * We don't know exactly which versions need a reset - + * We don't know exactly which versions need a reset * this guess is copied from the HAL. */ - sc->stats.rxorn_intr++; + ah->stats.rxorn_intr++; + if (ah->ah_mac_srev < AR5K_SREV_AR5212) { - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "rx overrun, resetting\n"); - ieee80211_queue_work(sc->hw, &sc->reset_work); - } - else - tasklet_schedule(&sc->rxtq); + ieee80211_queue_work(ah->hw, &ah->reset_work); + } else + ath5k_schedule_rx(ah); + } else { - if (status & AR5K_INT_SWBA) { - tasklet_hi_schedule(&sc->beacontq); - } - if (status & AR5K_INT_RXEOL) { - /* - * NB: the hardware should re-read the link when - * RXE bit is written, but it doesn't work at - * least on older hardware revs. - */ - sc->stats.rxeol_intr++; - } - if (status & AR5K_INT_TXURN) { - /* bump tx trigger level */ + + /* Software Beacon Alert -> Schedule beacon tasklet */ + if (status & AR5K_INT_SWBA) + tasklet_hi_schedule(&ah->beacontq); + + /* + * No more RX descriptors -> Just count + * + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work at + * least on older hardware revs. + */ + if (status & AR5K_INT_RXEOL) + ah->stats.rxeol_intr++; + + + /* TX Underrun -> Bump tx trigger level */ + if (status & AR5K_INT_TXURN) ath5k_hw_update_tx_triglevel(ah, true); - } + + /* RX -> Schedule rx tasklet */ if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR)) - tasklet_schedule(&sc->rxtq); - if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC - | AR5K_INT_TXERR | AR5K_INT_TXEOL)) - tasklet_schedule(&sc->txtq); - if (status & AR5K_INT_BMISS) { - /* TODO */ - } + ath5k_schedule_rx(ah); + + /* TX -> Schedule tx tasklet */ + if (status & (AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXEOL)) + ath5k_schedule_tx(ah); + + /* Missed beacon -> TODO + if (status & AR5K_INT_BMISS) + */ + + /* MIB event -> Update counters and notify ANI */ if (status & AR5K_INT_MIB) { - sc->stats.mib_intr++; + ah->stats.mib_intr++; ath5k_hw_update_mib_counters(ah); ath5k_ani_mib_intr(ah); } + + /* GPIO -> Notify RFKill layer */ if (status & AR5K_INT_GPIO) - tasklet_schedule(&sc->rf_kill.toggleq); + tasklet_schedule(&ah->rf_kill.toggleq); } + + if (ath5k_get_bus_type(ah) == ATH_AHB) + break; + } while (ath5k_hw_is_intr_pending(ah) && --counter > 0); + /* + * Until we handle rx/tx interrupts mask them on IMR + * + * NOTE: ah->(rx/tx)_pending are set when scheduling the tasklets + * and unset after we 've handled the interrupts. + */ + if (ah->rx_pending || ah->tx_pending) + ath5k_set_current_imask(ah); + if (unlikely(!counter)) - ATH5K_WARN(sc, "too many interrupts, giving up for now\n"); + ATH5K_WARN(ah, "too many interrupts, giving up for now\n"); + /* Fire up calibration poll */ ath5k_intr_calibration_poll(ah); return IRQ_HANDLED; @@ -2258,50 +2375,55 @@ ath5k_intr(int irq, void *dev_id) * for temperature/environment changes. */ static void -ath5k_tasklet_calibrate(unsigned long data) +ath5k_calibrate_work(struct work_struct *work) { - struct ath5k_softc *sc = (void *)data; - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = container_of(work, struct ath5k_hw, + calib_work); - /* Only full calibration for now */ - ah->ah_cal_mask |= AR5K_CALIBRATION_FULL; + /* Should we run a full calibration ? */ + if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) { - ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", - ieee80211_frequency_to_channel(sc->curchan->center_freq), - sc->curchan->hw_value); + ah->ah_cal_next_full = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); + ah->ah_cal_mask |= AR5K_CALIBRATION_FULL; - if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) { - /* - * Rfgain is out of bounds, reset the chip - * to load new gain values. - */ - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n"); - ieee80211_queue_work(sc->hw, &sc->reset_work); - } - if (ath5k_hw_phy_calibrate(ah, sc->curchan)) - ATH5K_ERR(sc, "calibration of channel %u failed\n", - ieee80211_frequency_to_channel( - sc->curchan->center_freq)); + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, + "running full calibration\n"); - /* Noise floor calibration interrupts rx/tx path while I/Q calibration - * doesn't. - * TODO: We should stop TX here, so that it doesn't interfere. - * Note that stopping the queues is not enough to stop TX! */ - if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) { - ah->ah_cal_next_nf = jiffies + - msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF); - ath5k_hw_update_noise_floor(ah); - } + if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) { + /* + * Rfgain is out of bounds, reset the chip + * to load new gain values. + */ + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "got new rfgain, resetting\n"); + ieee80211_queue_work(ah->hw, &ah->reset_work); + } + } else + ah->ah_cal_mask |= AR5K_CALIBRATION_SHORT; + + + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", + ieee80211_frequency_to_channel(ah->curchan->center_freq), + ah->curchan->hw_value); + + if (ath5k_hw_phy_calibrate(ah, ah->curchan)) + ATH5K_ERR(ah, "calibration of channel %u failed\n", + ieee80211_frequency_to_channel( + ah->curchan->center_freq)); - ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL; + /* Clear calibration flags */ + if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL) + ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL; + else if (ah->ah_cal_mask & AR5K_CALIBRATION_SHORT) + ah->ah_cal_mask &= ~AR5K_CALIBRATION_SHORT; } static void ath5k_tasklet_ani(unsigned long data) { - struct ath5k_softc *sc = (void *)data; - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = (void *)data; ah->ah_cal_mask |= AR5K_CALIBRATION_ANI; ath5k_ani_calibration(ah); @@ -2312,19 +2434,24 @@ ath5k_tasklet_ani(unsigned long data) static void ath5k_tx_complete_poll_work(struct work_struct *work) { - struct ath5k_softc *sc = container_of(work, struct ath5k_softc, + struct ath5k_hw *ah = container_of(work, struct ath5k_hw, tx_complete_work.work); struct ath5k_txq *txq; int i; bool needreset = false; - for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) { - if (sc->txqs[i].setup) { - txq = &sc->txqs[i]; + if (!test_bit(ATH_STAT_STARTED, ah->status)) + return; + + mutex_lock(&ah->lock); + + for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { + if (ah->txqs[i].setup) { + txq = &ah->txqs[i]; spin_lock_bh(&txq->lock); if (txq->txq_len > 1) { if (txq->txq_poll_mark) { - ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, + ATH5K_DBG(ah, ATH5K_DEBUG_XMIT, "TX queue stuck %d\n", txq->qnum); needreset = true; @@ -2340,12 +2467,14 @@ ath5k_tx_complete_poll_work(struct work_struct *work) } if (needreset) { - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "TX queues stuck, resetting\n"); - ath5k_reset(sc, sc->curchan); + ath5k_reset(ah, NULL, true); } - ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, + mutex_unlock(&ah->lock); + + ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work, msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); } @@ -2354,13 +2483,184 @@ ath5k_tx_complete_poll_work(struct work_struct *work) * Initialization routines * \*************************/ +static const struct ieee80211_iface_limit if_limits[] = { + { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) }, + { .max = 4, .types = +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif + BIT(NL80211_IFTYPE_AP) }, +}; + +static const struct ieee80211_iface_combination if_comb = { + .limits = if_limits, + .n_limits = ARRAY_SIZE(if_limits), + .max_interfaces = 2048, + .num_different_channels = 1, +}; + +int +ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops) +{ + struct ieee80211_hw *hw = ah->hw; + struct ath_common *common; + int ret; + int csz; + + /* Initialize driver private data */ + SET_IEEE80211_DEV(hw, ah->dev); + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_MFP_CAPABLE | + IEEE80211_HW_REPORTS_TX_ACK_STATUS | + IEEE80211_HW_SUPPORTS_RC_TABLE; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); + + hw->wiphy->iface_combinations = &if_comb; + hw->wiphy->n_iface_combinations = 1; + + /* SW support for IBSS_RSN is provided by mac80211 */ + hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + + hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ; + + /* both antennas can be configured as RX or TX */ + hw->wiphy->available_antennas_tx = 0x3; + hw->wiphy->available_antennas_rx = 0x3; + + hw->extra_tx_headroom = 2; + + /* + * Mark the device as detached to avoid processing + * interrupts until setup is complete. + */ + __set_bit(ATH_STAT_INVALID, ah->status); + + ah->opmode = NL80211_IFTYPE_STATION; + ah->bintval = 1000; + mutex_init(&ah->lock); + spin_lock_init(&ah->rxbuflock); + spin_lock_init(&ah->txbuflock); + spin_lock_init(&ah->block); + spin_lock_init(&ah->irqlock); + + /* Setup interrupt handler */ + ret = request_irq(ah->irq, ath5k_intr, IRQF_SHARED, "ath", ah); + if (ret) { + ATH5K_ERR(ah, "request_irq failed\n"); + goto err; + } + + common = ath5k_hw_common(ah); + common->ops = &ath5k_common_ops; + common->bus_ops = bus_ops; + common->ah = ah; + common->hw = hw; + common->priv = ah; + common->clockrate = 40; + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + ath5k_read_cachesize(common, &csz); + common->cachelsz = csz << 2; /* convert to bytes */ + + spin_lock_init(&common->cc_lock); + + /* Initialize device */ + ret = ath5k_hw_init(ah); + if (ret) + goto err_irq; + + /* Set up multi-rate retry capabilities */ + if (ah->ah_capabilities.cap_has_mrr_support) { + hw->max_rates = 4; + hw->max_rate_tries = max(AR5K_INIT_RETRY_SHORT, + AR5K_INIT_RETRY_LONG); + } + + hw->vif_data_size = sizeof(struct ath5k_vif); + + /* Finish private driver data initialization */ + ret = ath5k_init(hw); + if (ret) + goto err_ah; + + ATH5K_INFO(ah, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", + ath5k_chip_name(AR5K_VERSION_MAC, ah->ah_mac_srev), + ah->ah_mac_srev, + ah->ah_phy_revision); + + if (!ah->ah_single_chip) { + /* Single chip radio (!RF5111) */ + if (ah->ah_radio_5ghz_revision && + !ah->ah_radio_2ghz_revision) { + /* No 5GHz support -> report 2GHz radio */ + if (!test_bit(AR5K_MODE_11A, + ah->ah_capabilities.cap_mode)) { + ATH5K_INFO(ah, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_5ghz_revision), + ah->ah_radio_5ghz_revision); + /* No 2GHz support (5110 and some + * 5GHz only cards) -> report 5GHz radio */ + } else if (!test_bit(AR5K_MODE_11B, + ah->ah_capabilities.cap_mode)) { + ATH5K_INFO(ah, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_5ghz_revision), + ah->ah_radio_5ghz_revision); + /* Multiband radio */ + } else { + ATH5K_INFO(ah, "RF%s multiband radio found" + " (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_5ghz_revision), + ah->ah_radio_5ghz_revision); + } + } + /* Multi chip radio (RF5111 - RF2111) -> + * report both 2GHz/5GHz radios */ + else if (ah->ah_radio_5ghz_revision && + ah->ah_radio_2ghz_revision) { + ATH5K_INFO(ah, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_5ghz_revision), + ah->ah_radio_5ghz_revision); + ATH5K_INFO(ah, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_2ghz_revision), + ah->ah_radio_2ghz_revision); + } + } + + ath5k_debug_init_device(ah); + + /* ready to process interrupts */ + __clear_bit(ATH_STAT_INVALID, ah->status); + + return 0; +err_ah: + ath5k_hw_deinit(ah); +err_irq: + free_irq(ah->irq, ah); +err: + return ret; +} + static int -ath5k_stop_locked(struct ath5k_softc *sc) +ath5k_stop_locked(struct ath5k_hw *ah) { - struct ath5k_hw *ah = sc->ah; - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n", - test_bit(ATH_STAT_INVALID, sc->status)); + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "invalid %u\n", + test_bit(ATH_STAT_INVALID, ah->status)); /* * Shutdown the hardware and driver: @@ -2377,38 +2677,36 @@ ath5k_stop_locked(struct ath5k_softc *sc) * Note that some of this work is not possible if the * hardware is gone (invalid). */ - ieee80211_stop_queues(sc->hw); + ieee80211_stop_queues(ah->hw); - if (!test_bit(ATH_STAT_INVALID, sc->status)) { - ath5k_led_off(sc); + if (!test_bit(ATH_STAT_INVALID, ah->status)) { + ath5k_led_off(ah); ath5k_hw_set_imr(ah, 0); - synchronize_irq(sc->pdev->irq); - } - ath5k_txq_cleanup(sc); - if (!test_bit(ATH_STAT_INVALID, sc->status)) { - ath5k_rx_stop(sc); + synchronize_irq(ah->irq); + ath5k_rx_stop(ah); + ath5k_hw_dma_stop(ah); + ath5k_drain_tx_buffs(ah); ath5k_hw_phy_disable(ah); } return 0; } -static int -ath5k_init(struct ath5k_softc *sc) +int ath5k_start(struct ieee80211_hw *hw) { - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = hw->priv; struct ath_common *common = ath5k_hw_common(ah); int ret, i; - mutex_lock(&sc->lock); + mutex_lock(&ah->lock); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode); + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "mode %d\n", ah->opmode); /* * Stop anything previously setup. This is safe * no matter this is the first time through or not. */ - ath5k_stop_locked(sc); + ath5k_stop_locked(ah); /* * The basic interface to setting the hardware in a good @@ -2417,17 +2715,23 @@ ath5k_init(struct ath5k_softc *sc) * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ - sc->curchan = sc->hw->conf.channel; - sc->curband = &sc->sbands[sc->curchan->band]; - sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | - AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; - - ret = ath5k_reset(sc, NULL); + ah->curchan = ah->hw->conf.chandef.chan; + ah->imask = AR5K_INT_RXOK + | AR5K_INT_RXERR + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXDESC + | AR5K_INT_TXEOL + | AR5K_INT_FATAL + | AR5K_INT_GLOBAL + | AR5K_INT_MIB; + + ret = ath5k_reset(ah, NULL, false); if (ret) goto done; - ath5k_rfkill_hw_start(ah); + if (!ath5k_modparam_no_hw_rfkill_switch) + ath5k_rfkill_hw_start(ah); /* * Reset the key cache since some parts do not reset the @@ -2436,29 +2740,33 @@ ath5k_init(struct ath5k_softc *sc) for (i = 0; i < common->keymax; i++) ath_hw_keyreset(common, (u16) i); - ath5k_hw_set_ack_bitrate_high(ah, true); + /* Use higher rates for acks instead of base + * rate */ + ah->ah_ack_bitrate_high = true; - for (i = 0; i < ARRAY_SIZE(sc->bslot); i++) - sc->bslot[i] = NULL; + for (i = 0; i < ARRAY_SIZE(ah->bslot); i++) + ah->bslot[i] = NULL; ret = 0; done: mmiowb(); - mutex_unlock(&sc->lock); + mutex_unlock(&ah->lock); - ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, + set_bit(ATH_STAT_STARTED, ah->status); + ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work, msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); return ret; } -static void stop_tasklets(struct ath5k_softc *sc) +static void ath5k_stop_tasklets(struct ath5k_hw *ah) { - tasklet_kill(&sc->rxtq); - tasklet_kill(&sc->txtq); - tasklet_kill(&sc->calib); - tasklet_kill(&sc->beacontq); - tasklet_kill(&sc->ani_tasklet); + ah->rx_pending = false; + ah->tx_pending = false; + tasklet_kill(&ah->rxtq); + tasklet_kill(&ah->txtq); + tasklet_kill(&ah->beacontq); + tasklet_kill(&ah->ani_tasklet); } /* @@ -2467,14 +2775,14 @@ static void stop_tasklets(struct ath5k_softc *sc) * if another thread does a system call and the thread doing the * stop is preempted). */ -static int -ath5k_stop_hw(struct ath5k_softc *sc) +void ath5k_stop(struct ieee80211_hw *hw) { + struct ath5k_hw *ah = hw->priv; int ret; - mutex_lock(&sc->lock); - ret = ath5k_stop_locked(sc); - if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) { + mutex_lock(&ah->lock); + ret = ath5k_stop_locked(ah); + if (ret == 0 && !test_bit(ATH_STAT_INVALID, ah->status)) { /* * Don't set the card in full sleep mode! * @@ -2495,67 +2803,100 @@ ath5k_stop_hw(struct ath5k_softc *sc) * and Sam's HAL do anyway). Instead Perform a full reset * on the device (same as initial state after attach) and * leave it idle (keep MAC/BB on warm reset) */ - ret = ath5k_hw_on_hold(sc->ah); + ret = ath5k_hw_on_hold(ah); - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "putting device to sleep\n"); } mmiowb(); - mutex_unlock(&sc->lock); - - stop_tasklets(sc); + mutex_unlock(&ah->lock); - cancel_delayed_work_sync(&sc->tx_complete_work); + ath5k_stop_tasklets(ah); - ath5k_rfkill_hw_stop(sc->ah); + clear_bit(ATH_STAT_STARTED, ah->status); + cancel_delayed_work_sync(&ah->tx_complete_work); - return ret; + if (!ath5k_modparam_no_hw_rfkill_switch) + ath5k_rfkill_hw_stop(ah); } /* * Reset the hardware. If chan is not NULL, then also pause rx/tx * and change to the given channel. * - * This should be called with sc->lock. + * This should be called with ah->lock. */ static int -ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) +ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan, + bool skip_pcu) { - struct ath5k_hw *ah = sc->ah; - int ret; + struct ath_common *common = ath5k_hw_common(ah); + int ret, ani_mode; + bool fast; - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n"); ath5k_hw_set_imr(ah, 0); - synchronize_irq(sc->pdev->irq); - stop_tasklets(sc); + synchronize_irq(ah->irq); + ath5k_stop_tasklets(ah); - if (chan) { - ath5k_txq_cleanup(sc); - ath5k_rx_stop(sc); + /* Save ani mode and disable ANI during + * reset. If we don't we might get false + * PHY error interrupts. */ + ani_mode = ah->ani_state.ani_mode; + ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF); - sc->curchan = chan; - sc->curband = &sc->sbands[chan->band]; - } - ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL); + /* We are going to empty hw queues + * so we should also free any remaining + * tx buffers */ + ath5k_drain_tx_buffs(ah); + if (chan) + ah->curchan = chan; + + fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0; + + ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu); if (ret) { - ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); + ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret); goto err; } - ret = ath5k_rx_start(sc); + ret = ath5k_rx_start(ah); if (ret) { - ATH5K_ERR(sc, "can't start recv logic\n"); + ATH5K_ERR(ah, "can't start recv logic\n"); goto err; } - ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode); + ath5k_ani_init(ah, ani_mode); + + /* + * Set calibration intervals + * + * Note: We don't need to run calibration imediately + * since some initial calibration is done on reset + * even for fast channel switching. Also on scanning + * this will get set again and again and it won't get + * executed unless we connect somewhere and spend some + * time on the channel (that's what calibration needs + * anyway to be accurate). + */ + ah->ah_cal_next_full = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); + ah->ah_cal_next_ani = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI); + ah->ah_cal_next_short = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT); + + ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8); - ah->ah_cal_next_full = jiffies; - ah->ah_cal_next_ani = jiffies; - ah->ah_cal_next_nf = jiffies; - ewma_init(&ah->ah_beacon_rssi_avg, 1000, 8); + /* clear survey data and cycle counters */ + memset(&ah->survey, 0, sizeof(ah->survey)); + spin_lock_bh(&common->cc_lock); + ath_hw_cycle_counters_update(common); + memset(&common->cc_survey, 0, sizeof(common->cc_survey)); + memset(&common->cc_ani, 0, sizeof(common->cc_ani)); + spin_unlock_bh(&common->cc_lock); /* * Change channels and update the h/w rate map if we're switching; @@ -2566,12 +2907,12 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) * * XXX needed? */ -/* ath5k_chan_change(sc, c); */ +/* ath5k_chan_change(ah, c); */ - ath5k_beacon_config(sc); + ath5k_beacon_config(ah); /* intrs are enabled by ath5k_beacon_config */ - ieee80211_wake_queues(sc->hw); + ieee80211_wake_queues(ah->hw); return 0; err: @@ -2580,64 +2921,43 @@ err: static void ath5k_reset_work(struct work_struct *work) { - struct ath5k_softc *sc = container_of(work, struct ath5k_softc, + struct ath5k_hw *ah = container_of(work, struct ath5k_hw, reset_work); - mutex_lock(&sc->lock); - ath5k_reset(sc, sc->curchan); - mutex_unlock(&sc->lock); + mutex_lock(&ah->lock); + ath5k_reset(ah, NULL, true); + mutex_unlock(&ah->lock); } static int -ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) +ath5k_init(struct ieee80211_hw *hw) { - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; + + struct ath5k_hw *ah = hw->priv; struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); struct ath5k_txq *txq; u8 mac[ETH_ALEN] = {}; int ret; - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); - - /* - * Check if the MAC has multi-rate retry support. - * We do this by trying to setup a fake extended - * descriptor. MACs that don't have support will - * return false w/o doing anything. MACs that do - * support it will return true w/o doing anything. - */ - ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); - - if (ret < 0) - goto err; - if (ret > 0) - __set_bit(ATH_STAT_MRRETRY, sc->status); /* * Collect the channel list. The 802.11 layer - * is resposible for filtering this list based + * is responsible for filtering this list based * on settings like the phy mode and regulatory * domain restrictions. */ ret = ath5k_setup_bands(hw); if (ret) { - ATH5K_ERR(sc, "can't get channels\n"); + ATH5K_ERR(ah, "can't get channels\n"); goto err; } - /* NB: setup here so ath5k_rate_update is happy */ - if (test_bit(AR5K_MODE_11A, ah->ah_modes)) - ath5k_setcurmode(sc, AR5K_MODE_11A); - else - ath5k_setcurmode(sc, AR5K_MODE_11B); - /* * Allocate tx+rx descriptors and populate the lists. */ - ret = ath5k_desc_alloc(sc, pdev); + ret = ath5k_desc_alloc(ah); if (ret) { - ATH5K_ERR(sc, "can't allocate descriptors\n"); + ATH5K_ERR(ah, "can't allocate descriptors\n"); goto err; } @@ -2649,101 +2969,112 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) */ ret = ath5k_beaconq_setup(ah); if (ret < 0) { - ATH5K_ERR(sc, "can't setup a beacon xmit queue\n"); + ATH5K_ERR(ah, "can't setup a beacon xmit queue\n"); goto err_desc; } - sc->bhalq = ret; - sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0); - if (IS_ERR(sc->cabq)) { - ATH5K_ERR(sc, "can't setup cab queue\n"); - ret = PTR_ERR(sc->cabq); + ah->bhalq = ret; + ah->cabq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_CAB, 0); + if (IS_ERR(ah->cabq)) { + ATH5K_ERR(ah, "can't setup cab queue\n"); + ret = PTR_ERR(ah->cabq); goto err_bhal; } - /* This order matches mac80211's queue priority, so we can - * directly use the mac80211 queue number without any mapping */ - txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO); - if (IS_ERR(txq)) { - ATH5K_ERR(sc, "can't setup xmit queue\n"); - ret = PTR_ERR(txq); - goto err_queues; - } - txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI); - if (IS_ERR(txq)) { - ATH5K_ERR(sc, "can't setup xmit queue\n"); - ret = PTR_ERR(txq); - goto err_queues; - } - txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); - if (IS_ERR(txq)) { - ATH5K_ERR(sc, "can't setup xmit queue\n"); - ret = PTR_ERR(txq); - goto err_queues; - } - txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); - if (IS_ERR(txq)) { - ATH5K_ERR(sc, "can't setup xmit queue\n"); - ret = PTR_ERR(txq); - goto err_queues; + /* 5211 and 5212 usually support 10 queues but we better rely on the + * capability information */ + if (ah->ah_capabilities.cap_queues.q_tx_num >= 6) { + /* This order matches mac80211's queue priority, so we can + * directly use the mac80211 queue number without any mapping */ + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + hw->queues = 4; + } else { + /* older hardware (5210) can only support one data queue */ + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + hw->queues = 1; } - hw->queues = 4; - tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc); - tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); - tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc); - tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc); - tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc); + tasklet_init(&ah->rxtq, ath5k_tasklet_rx, (unsigned long)ah); + tasklet_init(&ah->txtq, ath5k_tasklet_tx, (unsigned long)ah); + tasklet_init(&ah->beacontq, ath5k_tasklet_beacon, (unsigned long)ah); + tasklet_init(&ah->ani_tasklet, ath5k_tasklet_ani, (unsigned long)ah); - INIT_WORK(&sc->reset_work, ath5k_reset_work); - INIT_DELAYED_WORK(&sc->tx_complete_work, ath5k_tx_complete_poll_work); + INIT_WORK(&ah->reset_work, ath5k_reset_work); + INIT_WORK(&ah->calib_work, ath5k_calibrate_work); + INIT_DELAYED_WORK(&ah->tx_complete_work, ath5k_tx_complete_poll_work); - ret = ath5k_eeprom_read_mac(ah, mac); + ret = ath5k_hw_common(ah)->bus_ops->eeprom_read_mac(ah, mac); if (ret) { - ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); + ATH5K_ERR(ah, "unable to read address from EEPROM\n"); goto err_queues; } SET_IEEE80211_PERM_ADDR(hw, mac); - memcpy(&sc->lladdr, mac, ETH_ALEN); /* All MAC address bits matter for ACKs */ - ath5k_update_bssid_mask_and_opmode(sc, NULL); + ath5k_update_bssid_mask_and_opmode(ah, NULL); regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain; ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier); if (ret) { - ATH5K_ERR(sc, "can't initialize regulatory system\n"); + ATH5K_ERR(ah, "can't initialize regulatory system\n"); goto err_queues; } ret = ieee80211_register_hw(hw); if (ret) { - ATH5K_ERR(sc, "can't register ieee80211 hw\n"); + ATH5K_ERR(ah, "can't register ieee80211 hw\n"); goto err_queues; } if (!ath_is_world_regd(regulatory)) regulatory_hint(hw->wiphy, regulatory->alpha2); - ath5k_init_leds(sc); + ath5k_init_leds(ah); - ath5k_sysfs_register(sc); + ath5k_sysfs_register(ah); return 0; err_queues: - ath5k_txq_release(sc); + ath5k_txq_release(ah); err_bhal: - ath5k_hw_release_tx_queue(ah, sc->bhalq); + ath5k_hw_release_tx_queue(ah, ah->bhalq); err_desc: - ath5k_desc_free(sc, pdev); + ath5k_desc_free(ah); err: return ret; } -static void -ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) +void +ath5k_deinit_ah(struct ath5k_hw *ah) { - struct ath5k_softc *sc = hw->priv; + struct ieee80211_hw *hw = ah->hw; /* * NB: the order of these is important: @@ -2759,512 +3090,40 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) * Other than that, it's straightforward... */ ieee80211_unregister_hw(hw); - ath5k_desc_free(sc, pdev); - ath5k_txq_release(sc); - ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); - ath5k_unregister_leds(sc); + ath5k_desc_free(ah); + ath5k_txq_release(ah); + ath5k_hw_release_tx_queue(ah, ah->bhalq); + ath5k_unregister_leds(ah); - ath5k_sysfs_unregister(sc); + ath5k_sysfs_unregister(ah); /* * NB: can't reclaim these until after ieee80211_ifdetach * returns because we'll get called back to reclaim node * state and potentially want to use them. */ + ath5k_hw_deinit(ah); + free_irq(ah->irq, ah); } -/********************\ -* Mac80211 functions * -\********************/ - -static int -ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct ath5k_softc *sc = hw->priv; - u16 qnum = skb_get_queue_mapping(skb); - - if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) { - dev_kfree_skb_any(skb); - return 0; - } - - return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]); -} - -static int ath5k_start(struct ieee80211_hw *hw) -{ - return ath5k_init(hw->priv); -} - -static void ath5k_stop(struct ieee80211_hw *hw) -{ - ath5k_stop_hw(hw->priv); -} - -static int ath5k_add_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct ath5k_softc *sc = hw->priv; - int ret; - struct ath5k_vif *avf = (void *)vif->drv_priv; - - mutex_lock(&sc->lock); - - if ((vif->type == NL80211_IFTYPE_AP || - vif->type == NL80211_IFTYPE_ADHOC) - && (sc->num_ap_vifs + sc->num_adhoc_vifs) >= ATH_BCBUF) { - ret = -ELNRNG; - goto end; - } - - /* Don't allow other interfaces if one ad-hoc is configured. - * TODO: Fix the problems with ad-hoc and multiple other interfaces. - * We would need to operate the HW in ad-hoc mode to allow TSF updates - * for the IBSS, but this breaks with additional AP or STA interfaces - * at the moment. */ - if (sc->num_adhoc_vifs || - (sc->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) { - ATH5K_ERR(sc, "Only one single ad-hoc interface is allowed.\n"); - ret = -ELNRNG; - goto end; - } - - switch (vif->type) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_MESH_POINT: - avf->opmode = vif->type; - break; - default: - ret = -EOPNOTSUPP; - goto end; - } - - sc->nvifs++; - ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode); - - /* Assign the vap/adhoc to a beacon xmit slot. */ - if ((avf->opmode == NL80211_IFTYPE_AP) || - (avf->opmode == NL80211_IFTYPE_ADHOC)) { - int slot; - - WARN_ON(list_empty(&sc->bcbuf)); - avf->bbuf = list_first_entry(&sc->bcbuf, struct ath5k_buf, - list); - list_del(&avf->bbuf->list); - - avf->bslot = 0; - for (slot = 0; slot < ATH_BCBUF; slot++) { - if (!sc->bslot[slot]) { - avf->bslot = slot; - break; - } - } - BUG_ON(sc->bslot[avf->bslot] != NULL); - sc->bslot[avf->bslot] = vif; - if (avf->opmode == NL80211_IFTYPE_AP) - sc->num_ap_vifs++; - else - sc->num_adhoc_vifs++; - } - - /* Any MAC address is fine, all others are included through the - * filter. - */ - memcpy(&sc->lladdr, vif->addr, ETH_ALEN); - ath5k_hw_set_lladdr(sc->ah, vif->addr); - - memcpy(&avf->lladdr, vif->addr, ETH_ALEN); - - ath5k_mode_setup(sc, vif); - - ret = 0; -end: - mutex_unlock(&sc->lock); - return ret; -} - -static void -ath5k_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) +bool +ath5k_any_vif_assoc(struct ath5k_hw *ah) { - struct ath5k_softc *sc = hw->priv; - struct ath5k_vif *avf = (void *)vif->drv_priv; - unsigned int i; - - mutex_lock(&sc->lock); - sc->nvifs--; - - if (avf->bbuf) { - ath5k_txbuf_free_skb(sc, avf->bbuf); - list_add_tail(&avf->bbuf->list, &sc->bcbuf); - for (i = 0; i < ATH_BCBUF; i++) { - if (sc->bslot[i] == vif) { - sc->bslot[i] = NULL; - break; - } - } - avf->bbuf = NULL; - } - if (avf->opmode == NL80211_IFTYPE_AP) - sc->num_ap_vifs--; - else if (avf->opmode == NL80211_IFTYPE_ADHOC) - sc->num_adhoc_vifs--; - - ath5k_update_bssid_mask_and_opmode(sc, NULL); - mutex_unlock(&sc->lock); -} - -/* - * TODO: Phy disable/diversity etc - */ -static int -ath5k_config(struct ieee80211_hw *hw, u32 changed) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - struct ieee80211_conf *conf = &hw->conf; - int ret = 0; - - mutex_lock(&sc->lock); - - if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - ret = ath5k_chan_set(sc, conf->channel); - if (ret < 0) - goto unlock; - } - - if ((changed & IEEE80211_CONF_CHANGE_POWER) && - (sc->power_level != conf->power_level)) { - sc->power_level = conf->power_level; - - /* Half dB steps */ - ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); - } - - /* TODO: - * 1) Move this on config_interface and handle each case - * separately eg. when we have only one STA vif, use - * AR5K_ANTMODE_SINGLE_AP - * - * 2) Allow the user to change antenna mode eg. when only - * one antenna is present - * - * 3) Allow the user to set default/tx antenna when possible - * - * 4) Default mode should handle 90% of the cases, together - * with fixed a/b and single AP modes we should be able to - * handle 99%. Sectored modes are extreme cases and i still - * haven't found a usage for them. If we decide to support them, - * then we must allow the user to set how many tx antennas we - * have available - */ - ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); - -unlock: - mutex_unlock(&sc->lock); - return ret; -} - -static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw, - struct netdev_hw_addr_list *mc_list) -{ - u32 mfilt[2], val; - u8 pos; - struct netdev_hw_addr *ha; - - mfilt[0] = 0; - mfilt[1] = 1; - - netdev_hw_addr_list_for_each(ha, mc_list) { - /* calculate XOR of eight 6-bit values */ - val = get_unaligned_le32(ha->addr + 0); - pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; - val = get_unaligned_le32(ha->addr + 3); - pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; - pos &= 0x3f; - mfilt[pos / 32] |= (1 << (pos % 32)); - /* XXX: we might be able to just do this instead, - * but not sure, needs testing, if we do use this we'd - * neet to inform below to not reset the mcast */ - /* ath5k_hw_set_mcast_filterindex(ah, - * ha->addr[5]); */ - } - - return ((u64)(mfilt[1]) << 32) | mfilt[0]; -} - -static bool ath_any_vif_assoc(struct ath5k_softc *sc) -{ - struct ath_vif_iter_data iter_data; + struct ath5k_vif_iter_data iter_data; iter_data.hw_macaddr = NULL; iter_data.any_assoc = false; iter_data.need_set_hw_addr = false; iter_data.found_active = true; - ieee80211_iterate_active_interfaces_atomic(sc->hw, ath_vif_iter, - &iter_data); + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); return iter_data.any_assoc; } -#define SUPPORTED_FIF_FLAGS \ - FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \ - FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \ - FIF_BCN_PRBRESP_PROMISC -/* - * o always accept unicast, broadcast, and multicast traffic - * o multicast traffic for all BSSIDs will be enabled if mac80211 - * says it should be - * o maintain current state of phy ofdm or phy cck error reception. - * If the hardware detects any of these type of errors then - * ath5k_hw_get_rx_filter() will pass to us the respective - * hardware filters to be able to receive these type of frames. - * o probe request frames are accepted only when operating in - * hostap, adhoc, or monitor modes - * o enable promiscuous mode according to the interface state - * o accept beacons: - * - when operating in adhoc mode so the 802.11 layer creates - * node table entries for peers, - * - when operating in station mode for collecting rssi data when - * the station is otherwise quiet, or - * - when scanning - */ -static void ath5k_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *new_flags, - u64 multicast) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - u32 mfilt[2], rfilt; - - mutex_lock(&sc->lock); - - mfilt[0] = multicast; - mfilt[1] = multicast >> 32; - - /* Only deal with supported flags */ - changed_flags &= SUPPORTED_FIF_FLAGS; - *new_flags &= SUPPORTED_FIF_FLAGS; - - /* If HW detects any phy or radar errors, leave those filters on. - * Also, always enable Unicast, Broadcasts and Multicast - * XXX: move unicast, bssid broadcasts and multicast to mac80211 */ - rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) | - (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST | - AR5K_RX_FILTER_MCAST); - - if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) { - if (*new_flags & FIF_PROMISC_IN_BSS) { - __set_bit(ATH_STAT_PROMISC, sc->status); - } else { - __clear_bit(ATH_STAT_PROMISC, sc->status); - } - } - - if (test_bit(ATH_STAT_PROMISC, sc->status)) - rfilt |= AR5K_RX_FILTER_PROM; - - /* Note, AR5K_RX_FILTER_MCAST is already enabled */ - if (*new_flags & FIF_ALLMULTI) { - mfilt[0] = ~0; - mfilt[1] = ~0; - } - - /* This is the best we can do */ - if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL)) - rfilt |= AR5K_RX_FILTER_PHYERR; - - /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons - * and probes for any BSSID */ - if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (sc->nvifs > 1)) - rfilt |= AR5K_RX_FILTER_BEACON; - - /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not - * set we should only pass on control frames for this - * station. This needs testing. I believe right now this - * enables *all* control frames, which is OK.. but - * but we should see if we can improve on granularity */ - if (*new_flags & FIF_CONTROL) - rfilt |= AR5K_RX_FILTER_CONTROL; - - /* Additional settings per mode -- this is per ath5k */ - - /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */ - - switch (sc->opmode) { - case NL80211_IFTYPE_MESH_POINT: - rfilt |= AR5K_RX_FILTER_CONTROL | - AR5K_RX_FILTER_BEACON | - AR5K_RX_FILTER_PROBEREQ | - AR5K_RX_FILTER_PROM; - break; - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_ADHOC: - rfilt |= AR5K_RX_FILTER_PROBEREQ | - AR5K_RX_FILTER_BEACON; - break; - case NL80211_IFTYPE_STATION: - if (sc->assoc) - rfilt |= AR5K_RX_FILTER_BEACON; - default: - break; - } - - /* Set filters */ - ath5k_hw_set_rx_filter(ah, rfilt); - - /* Set multicast bits */ - ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); - /* Set the cached hw filter flags, this will later actually - * be set in HW */ - sc->filter_flags = rfilt; - - mutex_unlock(&sc->lock); -} - -static int -ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) +void +ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable) { - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - struct ath_common *common = ath5k_hw_common(ah); - int ret = 0; - - if (modparam_nohwcrypt) - return -EOPNOTSUPP; - - switch (key->cipher) { - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - case WLAN_CIPHER_SUITE_TKIP: - break; - case WLAN_CIPHER_SUITE_CCMP: - if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM) - break; - return -EOPNOTSUPP; - default: - WARN_ON(1); - return -EINVAL; - } - - mutex_lock(&sc->lock); - - switch (cmd) { - case SET_KEY: - ret = ath_key_config(common, vif, sta, key); - if (ret >= 0) { - key->hw_key_idx = ret; - /* push IV and Michael MIC generation to stack */ - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - if (key->cipher == WLAN_CIPHER_SUITE_TKIP) - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - if (key->cipher == WLAN_CIPHER_SUITE_CCMP) - key->flags |= IEEE80211_KEY_FLAG_SW_MGMT; - ret = 0; - } - break; - case DISABLE_KEY: - ath_key_delete(common, key); - break; - default: - ret = -EINVAL; - } - - mmiowb(); - mutex_unlock(&sc->lock); - return ret; -} - -static int -ath5k_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - struct ath5k_softc *sc = hw->priv; - - /* Force update */ - ath5k_hw_update_mib_counters(sc->ah); - - stats->dot11ACKFailureCount = sc->stats.ack_fail; - stats->dot11RTSFailureCount = sc->stats.rts_fail; - stats->dot11RTSSuccessCount = sc->stats.rts_ok; - stats->dot11FCSErrorCount = sc->stats.fcs_error; - - return 0; -} - -static int ath5k_get_survey(struct ieee80211_hw *hw, int idx, - struct survey_info *survey) -{ - struct ath5k_softc *sc = hw->priv; - struct ieee80211_conf *conf = &hw->conf; - struct ath_common *common = ath5k_hw_common(sc->ah); - struct ath_cycle_counters *cc = &common->cc_survey; - unsigned int div = common->clockrate * 1000; - - if (idx != 0) - return -ENOENT; - - survey->channel = conf->channel; - survey->filled = SURVEY_INFO_NOISE_DBM; - survey->noise = sc->ah->ah_noise_floor; - - spin_lock_bh(&common->cc_lock); - ath_hw_cycle_counters_update(common); - if (cc->cycles > 0) { - survey->filled |= SURVEY_INFO_CHANNEL_TIME | - SURVEY_INFO_CHANNEL_TIME_BUSY | - SURVEY_INFO_CHANNEL_TIME_RX | - SURVEY_INFO_CHANNEL_TIME_TX; - survey->channel_time += cc->cycles / div; - survey->channel_time_busy += cc->rx_busy / div; - survey->channel_time_rx += cc->rx_frame / div; - survey->channel_time_tx += cc->tx_frame / div; - } - memset(cc, 0, sizeof(*cc)); - spin_unlock_bh(&common->cc_lock); - - return 0; -} - -static u64 -ath5k_get_tsf(struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - - return ath5k_hw_get_tsf64(sc->ah); -} - -static void -ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf) -{ - struct ath5k_softc *sc = hw->priv; - - ath5k_hw_set_tsf64(sc->ah, tsf); -} - -static void -ath5k_reset_tsf(struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - - /* - * in IBSS mode we need to update the beacon timers too. - * this will also reset the TSF if we call it with 0 - */ - if (sc->opmode == NL80211_IFTYPE_ADHOC) - ath5k_beacon_update_timers(sc, 0); - else - ath5k_hw_reset_tsf(sc->ah); -} - -static void -set_beacon_filter(struct ieee80211_hw *hw, bool enable) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = hw->priv; u32 rfilt; rfilt = ath5k_hw_get_rx_filter(ah); if (enable) @@ -3272,528 +3131,25 @@ set_beacon_filter(struct ieee80211_hw *hw, bool enable) else rfilt &= ~AR5K_RX_FILTER_BEACON; ath5k_hw_set_rx_filter(ah, rfilt); - sc->filter_flags = rfilt; -} - -static void ath5k_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) -{ - struct ath5k_vif *avf = (void *)vif->drv_priv; - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - struct ath_common *common = ath5k_hw_common(ah); - unsigned long flags; - - mutex_lock(&sc->lock); - - if (changes & BSS_CHANGED_BSSID) { - /* Cache for later use during resets */ - memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); - common->curaid = 0; - ath5k_hw_set_bssid(ah); - mmiowb(); - } - - if (changes & BSS_CHANGED_BEACON_INT) - sc->bintval = bss_conf->beacon_int; - - if (changes & BSS_CHANGED_ASSOC) { - avf->assoc = bss_conf->assoc; - if (bss_conf->assoc) - sc->assoc = bss_conf->assoc; - else - sc->assoc = ath_any_vif_assoc(sc); - - if (sc->opmode == NL80211_IFTYPE_STATION) - set_beacon_filter(hw, sc->assoc); - ath5k_hw_set_ledstate(sc->ah, sc->assoc ? - AR5K_LED_ASSOC : AR5K_LED_INIT); - if (bss_conf->assoc) { - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, - "Bss Info ASSOC %d, bssid: %pM\n", - bss_conf->aid, common->curbssid); - common->curaid = bss_conf->aid; - ath5k_hw_set_bssid(ah); - /* Once ANI is available you would start it here */ - } - } - - if (changes & BSS_CHANGED_BEACON) { - spin_lock_irqsave(&sc->block, flags); - ath5k_beacon_update(hw, vif); - spin_unlock_irqrestore(&sc->block, flags); - } - - if (changes & BSS_CHANGED_BEACON_ENABLED) - sc->enable_beacon = bss_conf->enable_beacon; - - if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED | - BSS_CHANGED_BEACON_INT)) - ath5k_beacon_config(sc); - - mutex_unlock(&sc->lock); -} - -static void ath5k_sw_scan_start(struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - if (!sc->assoc) - ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN); -} - -static void ath5k_sw_scan_complete(struct ieee80211_hw *hw) -{ - struct ath5k_softc *sc = hw->priv; - ath5k_hw_set_ledstate(sc->ah, sc->assoc ? - AR5K_LED_ASSOC : AR5K_LED_INIT); + ah->filter_flags = rfilt; } -/** - * ath5k_set_coverage_class - Set IEEE 802.11 coverage class - * - * @hw: struct ieee80211_hw pointer - * @coverage_class: IEEE 802.11 coverage class number - * - * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given - * coverage class. The values are persistent, they are restored after device - * reset. - */ -static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) +void _ath5k_printk(const struct ath5k_hw *ah, const char *level, + const char *fmt, ...) { - struct ath5k_softc *sc = hw->priv; + struct va_format vaf; + va_list args; - mutex_lock(&sc->lock); - ath5k_hw_set_coverage_class(sc->ah, coverage_class); - mutex_unlock(&sc->lock); -} - -static int ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue, - const struct ieee80211_tx_queue_params *params) -{ - struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - struct ath5k_txq_info qi; - int ret = 0; - - if (queue >= ah->ah_capabilities.cap_queues.q_tx_num) - return 0; + va_start(args, fmt); - mutex_lock(&sc->lock); + vaf.fmt = fmt; + vaf.va = &args; - ath5k_hw_get_tx_queueprops(ah, queue, &qi); - - qi.tqi_aifs = params->aifs; - qi.tqi_cw_min = params->cw_min; - qi.tqi_cw_max = params->cw_max; - qi.tqi_burst_time = params->txop; - - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, - "Configure tx [queue %d], " - "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", - queue, params->aifs, params->cw_min, - params->cw_max, params->txop); - - if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) { - ATH5K_ERR(sc, - "Unable to update hardware queue %u!\n", queue); - ret = -EIO; - } else - ath5k_hw_reset_tx_queue(ah, queue); - - mutex_unlock(&sc->lock); - - return ret; -} - -static int ath5k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) -{ - struct ath5k_softc *sc = hw->priv; - - if (tx_ant == 1 && rx_ant == 1) - ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_A); - else if (tx_ant == 2 && rx_ant == 2) - ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_B); - else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3) - ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_DEFAULT); + if (ah && ah->hw) + printk("%s" pr_fmt("%s: %pV"), + level, wiphy_name(ah->hw->wiphy), &vaf); else - return -EINVAL; - return 0; -} - -static int ath5k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) -{ - struct ath5k_softc *sc = hw->priv; + printk("%s" pr_fmt("%pV"), level, &vaf); - switch (sc->ah->ah_ant_mode) { - case AR5K_ANTMODE_FIXED_A: - *tx_ant = 1; *rx_ant = 1; break; - case AR5K_ANTMODE_FIXED_B: - *tx_ant = 2; *rx_ant = 2; break; - case AR5K_ANTMODE_DEFAULT: - *tx_ant = 3; *rx_ant = 3; break; - } - return 0; + va_end(args); } - -static const struct ieee80211_ops ath5k_hw_ops = { - .tx = ath5k_tx, - .start = ath5k_start, - .stop = ath5k_stop, - .add_interface = ath5k_add_interface, - .remove_interface = ath5k_remove_interface, - .config = ath5k_config, - .prepare_multicast = ath5k_prepare_multicast, - .configure_filter = ath5k_configure_filter, - .set_key = ath5k_set_key, - .get_stats = ath5k_get_stats, - .get_survey = ath5k_get_survey, - .conf_tx = ath5k_conf_tx, - .get_tsf = ath5k_get_tsf, - .set_tsf = ath5k_set_tsf, - .reset_tsf = ath5k_reset_tsf, - .bss_info_changed = ath5k_bss_info_changed, - .sw_scan_start = ath5k_sw_scan_start, - .sw_scan_complete = ath5k_sw_scan_complete, - .set_coverage_class = ath5k_set_coverage_class, - .set_antenna = ath5k_set_antenna, - .get_antenna = ath5k_get_antenna, -}; - -/********************\ -* PCI Initialization * -\********************/ - -static int __devinit -ath5k_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - void __iomem *mem; - struct ath5k_softc *sc; - struct ath_common *common; - struct ieee80211_hw *hw; - int ret; - u8 csz; - - /* - * L0s needs to be disabled on all ath5k cards. - * - * For distributions shipping with CONFIG_PCIEASPM (this will be enabled - * by default in the future in 2.6.36) this will also mean both L1 and - * L0s will be disabled when a pre 1.1 PCIe device is detected. We do - * know L1 works correctly even for all ath5k pre 1.1 PCIe devices - * though but cannot currently undue the effect of a blacklist, for - * details you can read pcie_aspm_sanity_check() and see how it adjusts - * the device link capability. - * - * It may be possible in the future to implement some PCI API to allow - * drivers to override blacklists for pre 1.1 PCIe but for now it is - * best to accept that both L0s and L1 will be disabled completely for - * distributions shipping with CONFIG_PCIEASPM rather than having this - * issue present. Motivation for adding this new API will be to help - * with power consumption for some of these devices. - */ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); - - ret = pci_enable_device(pdev); - if (ret) { - dev_err(&pdev->dev, "can't enable device\n"); - goto err; - } - - /* XXX 32-bit addressing only */ - ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (ret) { - dev_err(&pdev->dev, "32-bit DMA not available\n"); - goto err_dis; - } - - /* - * Cache line size is used to size and align various - * structures used to communicate with the hardware. - */ - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); - if (csz == 0) { - /* - * Linux 2.4.18 (at least) writes the cache line size - * register as a 16-bit wide register which is wrong. - * We must have this setup properly for rx buffer - * DMA to work so force a reasonable value here if it - * comes up zero. - */ - csz = L1_CACHE_BYTES >> 2; - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); - } - /* - * The default setting of latency timer yields poor results, - * set it to the value used by other systems. It may be worth - * tweaking this setting more. - */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); - - /* Enable bus mastering */ - pci_set_master(pdev); - - /* - * Disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state. - */ - pci_write_config_byte(pdev, 0x41, 0); - - ret = pci_request_region(pdev, 0, "ath5k"); - if (ret) { - dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); - goto err_dis; - } - - mem = pci_iomap(pdev, 0, 0); - if (!mem) { - dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; - ret = -EIO; - goto err_reg; - } - - /* - * Allocate hw (mac80211 main struct) - * and hw->priv (driver private data) - */ - hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops); - if (hw == NULL) { - dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); - ret = -ENOMEM; - goto err_map; - } - - dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); - - /* Initialize driver private data */ - SET_IEEE80211_DEV(hw, &pdev->dev); - hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; - - hw->wiphy->interface_modes = - BIT(NL80211_IFTYPE_AP) | - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_MESH_POINT); - - hw->extra_tx_headroom = 2; - hw->channel_change_time = 5000; - sc = hw->priv; - sc->hw = hw; - sc->pdev = pdev; - - /* - * Mark the device as detached to avoid processing - * interrupts until setup is complete. - */ - __set_bit(ATH_STAT_INVALID, sc->status); - - sc->iobase = mem; /* So we can unmap it on detach */ - sc->opmode = NL80211_IFTYPE_STATION; - sc->bintval = 1000; - mutex_init(&sc->lock); - spin_lock_init(&sc->rxbuflock); - spin_lock_init(&sc->txbuflock); - spin_lock_init(&sc->block); - - /* Set private data */ - pci_set_drvdata(pdev, sc); - - /* Setup interrupt handler */ - ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); - if (ret) { - ATH5K_ERR(sc, "request_irq failed\n"); - goto err_free; - } - - /* If we passed the test, malloc an ath5k_hw struct */ - sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); - if (!sc->ah) { - ret = -ENOMEM; - ATH5K_ERR(sc, "out of memory\n"); - goto err_irq; - } - - sc->ah->ah_sc = sc; - sc->ah->ah_iobase = sc->iobase; - common = ath5k_hw_common(sc->ah); - common->ops = &ath5k_common_ops; - common->ah = sc->ah; - common->hw = hw; - common->cachelsz = csz << 2; /* convert to bytes */ - spin_lock_init(&common->cc_lock); - - /* Initialize device */ - ret = ath5k_hw_attach(sc); - if (ret) { - goto err_free_ah; - } - - /* set up multi-rate retry capabilities */ - if (sc->ah->ah_version == AR5K_AR5212) { - hw->max_rates = 4; - hw->max_rate_tries = 11; - } - - hw->vif_data_size = sizeof(struct ath5k_vif); - - /* Finish private driver data initialization */ - ret = ath5k_attach(pdev, hw); - if (ret) - goto err_ah; - - ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", - ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), - sc->ah->ah_mac_srev, - sc->ah->ah_phy_revision); - - if (!sc->ah->ah_single_chip) { - /* Single chip radio (!RF5111) */ - if (sc->ah->ah_radio_5ghz_revision && - !sc->ah->ah_radio_2ghz_revision) { - /* No 5GHz support -> report 2GHz radio */ - if (!test_bit(AR5K_MODE_11A, - sc->ah->ah_capabilities.cap_mode)) { - ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* No 2GHz support (5110 and some - * 5Ghz only cards) -> report 5Ghz radio */ - } else if (!test_bit(AR5K_MODE_11B, - sc->ah->ah_capabilities.cap_mode)) { - ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - /* Multiband radio */ - } else { - ATH5K_INFO(sc, "RF%s multiband radio found" - " (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - } - } - /* Multi chip radio (RF5111 - RF2111) -> - * report both 2GHz/5GHz radios */ - else if (sc->ah->ah_radio_5ghz_revision && - sc->ah->ah_radio_2ghz_revision){ - ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_5ghz_revision), - sc->ah->ah_radio_5ghz_revision); - ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", - ath5k_chip_name(AR5K_VERSION_RAD, - sc->ah->ah_radio_2ghz_revision), - sc->ah->ah_radio_2ghz_revision); - } - } - - ath5k_debug_init_device(sc); - - /* ready to process interrupts */ - __clear_bit(ATH_STAT_INVALID, sc->status); - - return 0; -err_ah: - ath5k_hw_detach(sc->ah); -err_free_ah: - kfree(sc->ah); -err_irq: - free_irq(pdev->irq, sc); -err_free: - ieee80211_free_hw(hw); -err_map: - pci_iounmap(pdev, mem); -err_reg: - pci_release_region(pdev, 0); -err_dis: - pci_disable_device(pdev); -err: - return ret; -} - -static void __devexit -ath5k_pci_remove(struct pci_dev *pdev) -{ - struct ath5k_softc *sc = pci_get_drvdata(pdev); - - ath5k_debug_finish_device(sc); - ath5k_detach(pdev, sc->hw); - ath5k_hw_detach(sc->ah); - kfree(sc->ah); - free_irq(pdev->irq, sc); - pci_iounmap(pdev, sc->iobase); - pci_release_region(pdev, 0); - pci_disable_device(pdev); - ieee80211_free_hw(sc->hw); -} - -#ifdef CONFIG_PM_SLEEP -static int ath5k_pci_suspend(struct device *dev) -{ - struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev)); - - ath5k_led_off(sc); - return 0; -} - -static int ath5k_pci_resume(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct ath5k_softc *sc = pci_get_drvdata(pdev); - - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state - */ - pci_write_config_byte(pdev, 0x41, 0); - - ath5k_led_enable(sc); - return 0; -} - -static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); -#define ATH5K_PM_OPS (&ath5k_pm_ops) -#else -#define ATH5K_PM_OPS NULL -#endif /* CONFIG_PM_SLEEP */ - -static struct pci_driver ath5k_pci_driver = { - .name = KBUILD_MODNAME, - .id_table = ath5k_pci_id_table, - .probe = ath5k_pci_probe, - .remove = __devexit_p(ath5k_pci_remove), - .driver.pm = ATH5K_PM_OPS, -}; - -/* - * Module init/exit functions - */ -static int __init -init_ath5k_pci(void) -{ - int ret; - - ret = pci_register_driver(&ath5k_pci_driver); - if (ret) { - printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); - return ret; - } - - return 0; -} - -static void __exit -exit_ath5k_pci(void) -{ - pci_unregister_driver(&ath5k_pci_driver); -} - -module_init(init_ath5k_pci); -module_exit(exit_ath5k_pci); diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index 9a79773cdc2..97469d0fbad 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -38,228 +38,84 @@ /* * Definitions for the Atheros Wireless LAN controller driver. */ -#ifndef _DEV_ATH_ATHVAR_H -#define _DEV_ATH_ATHVAR_H - -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/wireless.h> -#include <linux/if_ether.h> -#include <linux/leds.h> -#include <linux/rfkill.h> -#include <linux/workqueue.h> - -#include "ath5k.h" -#include "debug.h" -#include "ani.h" - -#include "../regd.h" -#include "../ath.h" - -#define ATH_RXBUF 40 /* number of RX buffers */ -#define ATH_TXBUF 200 /* number of TX buffers */ -#define ATH_BCBUF 4 /* number of beacon buffers */ -#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ -#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ - -struct ath5k_buf { - struct list_head list; - struct ath5k_desc *desc; /* virtual addr of desc */ - dma_addr_t daddr; /* physical addr of desc */ - struct sk_buff *skb; /* skbuff for buf */ - dma_addr_t skbaddr;/* physical addr of skb data */ -}; - -/* - * Data transmit queue state. One of these exists for each - * hardware transmit queue. Packets sent to us from above - * are assigned to queues based on their priority. Not all - * devices support a complete set of hardware transmit queues. - * For those devices the array sc_ac2q will map multiple - * priorities to fewer hardware queues (typically all to one - * hardware queue). - */ -struct ath5k_txq { - unsigned int qnum; /* hardware q number */ - u32 *link; /* link ptr in last TX desc */ - struct list_head q; /* transmit queue */ - spinlock_t lock; /* lock on q and link */ - bool setup; - int txq_len; /* number of queued buffers */ - bool txq_poll_mark; - unsigned int txq_stuck; /* informational counter */ +#ifndef _DEV_ATH5K_BASE_H +#define _DEV_ATH5K_BASE_H + +struct ieee80211_vif; +struct ieee80211_hw; +struct ath5k_hw; +struct ath5k_txq; +struct ieee80211_channel; +struct ath_bus_ops; +struct ieee80211_tx_control; +enum nl80211_iftype; + +enum ath5k_srev_type { + AR5K_VERSION_MAC, + AR5K_VERSION_RAD, }; -#define ATH5K_LED_MAX_NAME_LEN 31 - -/* - * State for LED triggers - */ -struct ath5k_led -{ - char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ - struct ath5k_softc *sc; /* driver state */ - struct led_classdev led_dev; /* led classdev */ +struct ath5k_srev_name { + const char *sr_name; + enum ath5k_srev_type sr_type; + u_int sr_val; }; -/* Rfkill */ -struct ath5k_rfkill { - /* GPIO PIN for rfkill */ - u16 gpio; - /* polarity of rfkill GPIO PIN */ - bool polarity; - /* RFKILL toggle tasklet */ - struct tasklet_struct toggleq; -}; - -/* statistics */ -struct ath5k_statistics { - /* antenna use */ - unsigned int antenna_rx[5]; /* frames count per antenna RX */ - unsigned int antenna_tx[5]; /* frames count per antenna TX */ - - /* frame errors */ - unsigned int rx_all_count; /* all RX frames, including errors */ - unsigned int tx_all_count; /* all TX frames, including errors */ - unsigned int rx_bytes_count; /* all RX bytes, including errored pks - * and the MAC headers for each packet - */ - unsigned int tx_bytes_count; /* all TX bytes, including errored pkts - * and the MAC headers and padding for - * each packet. - */ - unsigned int rxerr_crc; - unsigned int rxerr_phy; - unsigned int rxerr_phy_code[32]; - unsigned int rxerr_fifo; - unsigned int rxerr_decrypt; - unsigned int rxerr_mic; - unsigned int rxerr_proc; - unsigned int rxerr_jumbo; - unsigned int txerr_retry; - unsigned int txerr_fifo; - unsigned int txerr_filt; - - /* MIB counters */ - unsigned int ack_fail; - unsigned int rts_fail; - unsigned int rts_ok; - unsigned int fcs_error; - unsigned int beacons; - - unsigned int mib_intr; - unsigned int rxorn_intr; - unsigned int rxeol_intr; +struct ath5k_buf { + struct list_head list; + struct ath5k_desc *desc; /* virtual addr of desc */ + dma_addr_t daddr; /* physical addr of desc */ + struct sk_buff *skb; /* skbuff for buf */ + dma_addr_t skbaddr; /* physical addr of skb data */ + struct ieee80211_tx_rate rates[4]; /* number of multi-rate stages */ }; -#if CHAN_DEBUG -#define ATH_CHAN_MAX (26+26+26+200+200) -#else -#define ATH_CHAN_MAX (14+14+14+252+20) -#endif - struct ath5k_vif { bool assoc; /* are we associated or not */ enum nl80211_iftype opmode; int bslot; struct ath5k_buf *bbuf; /* beacon buffer */ - u8 lladdr[ETH_ALEN]; }; -/* Software Carrier, keeps track of the driver state - * associated with an instance of a device */ -struct ath5k_softc { - struct pci_dev *pdev; /* for dma mapping */ - void __iomem *iobase; /* address of the device */ - struct mutex lock; /* dev-level lock */ - struct ieee80211_hw *hw; /* IEEE 802.11 common */ - struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; - struct ieee80211_channel channels[ATH_CHAN_MAX]; - struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; - s8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; - enum nl80211_iftype opmode; - struct ath5k_hw *ah; /* Atheros HW */ - - struct ieee80211_supported_band *curband; - -#ifdef CONFIG_ATH5K_DEBUG - struct ath5k_dbg_info debug; /* debug info */ -#endif /* CONFIG_ATH5K_DEBUG */ - - struct ath5k_buf *bufptr; /* allocated buffer ptr */ - struct ath5k_desc *desc; /* TX/RX descriptors */ - dma_addr_t desc_daddr; /* DMA (physical) address */ - size_t desc_len; /* size of TX/RX descriptors */ - - DECLARE_BITMAP(status, 5); -#define ATH_STAT_INVALID 0 /* disable hardware accesses */ -#define ATH_STAT_MRRETRY 1 /* multi-rate retry support */ -#define ATH_STAT_PROMISC 2 -#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */ -#define ATH_STAT_STARTED 4 /* opened & irqs enabled */ - - unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ - unsigned int curmode; /* current phy mode */ - struct ieee80211_channel *curchan; /* current h/w channel */ - - u16 nvifs; - - enum ath5k_int imask; /* interrupt mask copy */ - - u8 lladdr[ETH_ALEN]; - u8 bssidmask[ETH_ALEN]; - - unsigned int led_pin, /* GPIO pin for driving LED */ - led_on; /* pin setting for LED on */ - - struct work_struct reset_work; /* deferred chip reset */ - - unsigned int rxbufsize; /* rx size based on mtu */ - struct list_head rxbuf; /* receive buffer */ - spinlock_t rxbuflock; - u32 *rxlink; /* link ptr in last RX desc */ - struct tasklet_struct rxtq; /* rx intr tasklet */ - struct ath5k_led rx_led; /* rx led */ - - struct list_head txbuf; /* transmit buffer */ - spinlock_t txbuflock; - unsigned int txbuf_len; /* buf count in txbuf list */ - struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ - struct tasklet_struct txtq; /* tx intr tasklet */ - struct ath5k_led tx_led; /* tx led */ +struct ath5k_vif_iter_data { + const u8 *hw_macaddr; + u8 mask[ETH_ALEN]; + u8 active_mac[ETH_ALEN]; /* first active MAC */ + bool need_set_hw_addr; + bool found_active; + bool any_assoc; + enum nl80211_iftype opmode; + int n_stas; +}; - struct ath5k_rfkill rf_kill; +void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif); +bool ath5k_any_vif_assoc(struct ath5k_hw *ah); - struct tasklet_struct calib; /* calibration tasklet */ +int ath5k_start(struct ieee80211_hw *hw); +void ath5k_stop(struct ieee80211_hw *hw); - spinlock_t block; /* protects beacon */ - struct tasklet_struct beacontq; /* beacon intr tasklet */ - struct list_head bcbuf; /* beacon buffer */ - struct ieee80211_vif *bslot[ATH_BCBUF]; - u16 num_ap_vifs; - u16 num_adhoc_vifs; - unsigned int bhalq, /* SW q for outgoing beacons */ - bmisscount, /* missed beacon transmits */ - bintval, /* beacon interval in TU */ - bsent; - unsigned int nexttbtt; /* next beacon time in TU */ - struct ath5k_txq *cabq; /* content after beacon */ +void ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf); +int ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif); +void ath5k_beacon_config(struct ath5k_hw *ah); +void ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable); - int power_level; /* Requested tx power in dbm */ - bool assoc; /* associate state */ - bool enable_beacon; /* true if beacons are on */ +void ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah, + struct ieee80211_vif *vif); +int ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef); +void ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf); +void ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf); +void ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ath5k_txq *txq, struct ieee80211_tx_control *control); - struct ath5k_statistics stats; +const char *ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val); - struct ath5k_ani_state ani_state; - struct tasklet_struct ani_tasklet; /* ANI calibration */ +int ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops); +void ath5k_deinit_ah(struct ath5k_hw *ah); - struct delayed_work tx_complete_work; -}; +/* Check whether BSSID mask is supported */ +#define ath5k_hw_hasbssidmask(_ah) (ah->ah_version == AR5K_AR5212) -#define ath5k_hw_hasbssidmask(_ah) \ - (ath5k_hw_get_capability(_ah, AR5K_CAP_BSSIDMASK, 0, NULL) == 0) -#define ath5k_hw_hasveol(_ah) \ - (ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0) +/* Check whether virtual EOL is supported */ +#define ath5k_hw_hasveol(_ah) (ah->ah_version != AR5K_AR5210) -#endif +#endif /* _DEV_ATH5K_BASE_H */ diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c index beae519aa73..994169ad39c 100644 --- a/drivers/net/wireless/ath/ath5k/caps.c +++ b/drivers/net/wireless/ath/ath5k/caps.c @@ -24,7 +24,7 @@ #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" +#include "../regd.h" /* * Fill the capabilities struct @@ -32,34 +32,33 @@ */ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) { + struct ath5k_capabilities *caps = &ah->ah_capabilities; u16 ee_header; /* Capabilities stored in the EEPROM */ - ee_header = ah->ah_capabilities.cap_eeprom.ee_header; + ee_header = caps->cap_eeprom.ee_header; if (ah->ah_version == AR5K_AR5210) { /* * Set radio capabilities * (The AR5110 only supports the middle 5GHz band) */ - ah->ah_capabilities.cap_range.range_5ghz_min = 5120; - ah->ah_capabilities.cap_range.range_5ghz_max = 5430; - ah->ah_capabilities.cap_range.range_2ghz_min = 0; - ah->ah_capabilities.cap_range.range_2ghz_max = 0; + caps->cap_range.range_5ghz_min = 5120; + caps->cap_range.range_5ghz_max = 5430; + caps->cap_range.range_2ghz_min = 0; + caps->cap_range.range_2ghz_max = 0; /* Set supported modes */ - __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A, caps->cap_mode); } else { /* - * XXX The tranceiver supports frequencies from 4920 to 6100GHz - * XXX and from 2312 to 2732GHz. There are problems with the + * XXX The transceiver supports frequencies from 4920 to 6100MHz + * XXX and from 2312 to 2732MHz. There are problems with the * XXX current ieee80211 implementation because the IEEE * XXX channel mapping does not support negative channel * XXX numbers (2312MHz is channel -19). Of course, this - * XXX doesn't matter because these channels are out of range - * XXX but some regulation domains like MKK (Japan) will - * XXX support frequencies somewhere around 4.8GHz. + * XXX doesn't matter because these channels are out of the + * XXX legal range. */ /* @@ -67,18 +66,14 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) */ if (AR5K_EEPROM_HDR_11A(ee_header)) { - /* 4920 */ - ah->ah_capabilities.cap_range.range_5ghz_min = 5005; - ah->ah_capabilities.cap_range.range_5ghz_max = 6100; + if (ath_is_49ghz_allowed(caps->cap_eeprom.ee_regdomain)) + caps->cap_range.range_5ghz_min = 4920; + else + caps->cap_range.range_5ghz_min = 5005; + caps->cap_range.range_5ghz_max = 6100; /* Set supported modes */ - __set_bit(AR5K_MODE_11A, - ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, - ah->ah_capabilities.cap_mode); - if (ah->ah_version == AR5K_AR5212) - __set_bit(AR5K_MODE_11G_TURBO, - ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A, caps->cap_mode); } /* Enable 802.11b if a 2GHz capable radio (2111/5112) is @@ -87,78 +82,46 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) (AR5K_EEPROM_HDR_11G(ee_header) && ah->ah_version != AR5K_AR5211)) { /* 2312 */ - ah->ah_capabilities.cap_range.range_2ghz_min = 2412; - ah->ah_capabilities.cap_range.range_2ghz_max = 2732; - - if (AR5K_EEPROM_HDR_11B(ee_header)) - __set_bit(AR5K_MODE_11B, - ah->ah_capabilities.cap_mode); - - if (AR5K_EEPROM_HDR_11G(ee_header) && - ah->ah_version != AR5K_AR5211) - __set_bit(AR5K_MODE_11G, - ah->ah_capabilities.cap_mode); + caps->cap_range.range_2ghz_min = 2412; + caps->cap_range.range_2ghz_max = 2732; + + /* Override 2GHz modes on SoCs that need it + * NOTE: cap_needs_2GHz_ovr gets set from + * ath_ahb_probe */ + if (!caps->cap_needs_2GHz_ovr) { + if (AR5K_EEPROM_HDR_11B(ee_header)) + __set_bit(AR5K_MODE_11B, + caps->cap_mode); + + if (AR5K_EEPROM_HDR_11G(ee_header) && + ah->ah_version != AR5K_AR5211) + __set_bit(AR5K_MODE_11G, + caps->cap_mode); + } } } + if ((ah->ah_radio_5ghz_revision & 0xf0) == AR5K_SREV_RAD_2112) + __clear_bit(AR5K_MODE_11A, caps->cap_mode); + /* Set number of supported TX queues */ if (ah->ah_version == AR5K_AR5210) - ah->ah_capabilities.cap_queues.q_tx_num = - AR5K_NUM_TX_QUEUES_NOQCU; + caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES_NOQCU; else - ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; + caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; - /* newer hardware has PHY error counters */ + /* Newer hardware has PHY error counters */ if (ah->ah_mac_srev >= AR5K_SREV_AR5213A) - ah->ah_capabilities.cap_has_phyerr_counters = true; + caps->cap_has_phyerr_counters = true; else - ah->ah_capabilities.cap_has_phyerr_counters = false; - - return 0; -} + caps->cap_has_phyerr_counters = false; -/* Main function used by the driver part to check caps */ -int ath5k_hw_get_capability(struct ath5k_hw *ah, - enum ath5k_capability_type cap_type, - u32 capability, u32 *result) -{ - switch (cap_type) { - case AR5K_CAP_NUM_TXQUEUES: - if (result) { - if (ah->ah_version == AR5K_AR5210) - *result = AR5K_NUM_TX_QUEUES_NOQCU; - else - *result = AR5K_NUM_TX_QUEUES; - goto yes; - } - case AR5K_CAP_VEOL: - goto yes; - case AR5K_CAP_COMPRESSION: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_BURST: - goto yes; - case AR5K_CAP_TPC: - goto yes; - case AR5K_CAP_BSSIDMASK: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_XR: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - default: - goto no; - } + /* MACs since AR5212 have MRR support */ + if (ah->ah_version == AR5K_AR5212) + caps->cap_has_mrr_support = true; + else + caps->cap_has_mrr_support = false; -no: - return -EINVAL; -yes: return 0; } diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c index 7d785cb60ce..b8d031ae63c 100644 --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -58,25 +58,20 @@ * THE POSSIBILITY OF SUCH DAMAGES. */ -#include "base.h" -#include "debug.h" -#include "../debug.h" - -static unsigned int ath5k_debug; -module_param_named(debug, ath5k_debug, uint, 0); - +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#ifdef CONFIG_ATH5K_DEBUG +#include <linux/export.h> +#include <linux/moduleparam.h> #include <linux/seq_file.h> +#include <linux/list.h> +#include "debug.h" +#include "ath5k.h" #include "reg.h" -#include "ani.h" +#include "base.h" -static int ath5k_debugfs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} +static unsigned int ath5k_debug; +module_param_named(debug, ath5k_debug, uint, 0); /* debugfs: registers */ @@ -158,10 +153,10 @@ static void *reg_next(struct seq_file *seq, void *p, loff_t *pos) static int reg_show(struct seq_file *seq, void *p) { - struct ath5k_softc *sc = seq->private; + struct ath5k_hw *ah = seq->private; struct reg *r = p; seq_printf(seq, "%-25s0x%08x\n", r->name, - ath5k_hw_reg_read(sc->ah, r->addr)); + ath5k_hw_reg_read(ah, r->addr)); return 0; } @@ -198,43 +193,42 @@ static const struct file_operations fops_registers = { static ssize_t read_file_beacon(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = file->private_data; char buf[500]; unsigned int len = 0; unsigned int v; u64 tsf; - v = ath5k_hw_reg_read(sc->ah, AR5K_BEACON); - len += snprintf(buf+len, sizeof(buf)-len, + v = ath5k_hw_reg_read(ah, AR5K_BEACON); + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tintval: %d\tTIM: 0x%x\n", "AR5K_BEACON", v, v & AR5K_BEACON_PERIOD, (v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n", - "AR5K_LAST_TSTP", ath5k_hw_reg_read(sc->ah, AR5K_LAST_TSTP)); + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n", + "AR5K_LAST_TSTP", ath5k_hw_reg_read(ah, AR5K_LAST_TSTP)); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n\n", - "AR5K_BEACON_CNT", ath5k_hw_reg_read(sc->ah, AR5K_BEACON_CNT)); + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n\n", + "AR5K_BEACON_CNT", ath5k_hw_reg_read(ah, AR5K_BEACON_CNT)); - v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER0); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + v = ath5k_hw_reg_read(ah, AR5K_TIMER0); + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", "AR5K_TIMER0 (TBTT)", v, v); - v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER1); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + v = ath5k_hw_reg_read(ah, AR5K_TIMER1); + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", "AR5K_TIMER1 (DMA)", v, v >> 3); - v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER2); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + v = ath5k_hw_reg_read(ah, AR5K_TIMER2); + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", "AR5K_TIMER2 (SWBA)", v, v >> 3); - v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER3); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + v = ath5k_hw_reg_read(ah, AR5K_TIMER3); + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", "AR5K_TIMER3 (ATIM)", v, v); - tsf = ath5k_hw_get_tsf64(sc->ah); - len += snprintf(buf+len, sizeof(buf)-len, + tsf = ath5k_hw_get_tsf64(ah); + len += snprintf(buf + len, sizeof(buf) - len, "TSF\t\t0x%016llx\tTU: %08x\n", (unsigned long long)tsf, TSF_TO_TU(tsf)); @@ -248,19 +242,20 @@ static ssize_t write_file_beacon(struct file *file, const char __user *userbuf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; - struct ath5k_hw *ah = sc->ah; + struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "disable", 7) == 0) { AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); - printk(KERN_INFO "debugfs disable beacons\n"); + pr_info("debugfs disable beacons\n"); } else if (strncmp(buf, "enable", 6) == 0) { AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); - printk(KERN_INFO "debugfs enable beacons\n"); + pr_info("debugfs enable beacons\n"); } return count; } @@ -268,7 +263,7 @@ static ssize_t write_file_beacon(struct file *file, static const struct file_operations fops_beacon = { .read = read_file_beacon, .write = write_file_beacon, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -280,15 +275,15 @@ static ssize_t write_file_reset(struct file *file, const char __user *userbuf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "debug file triggered reset\n"); - ieee80211_queue_work(sc->hw, &sc->reset_work); + struct ath5k_hw *ah = file->private_data; + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "debug file triggered reset\n"); + ieee80211_queue_work(ah->hw, &ah->reset_work); return count; } static const struct file_operations fops_reset = { .write = write_file_reset, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = noop_llseek, }; @@ -309,9 +304,8 @@ static const struct { { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" }, { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" }, { ATH5K_DEBUG_LED, "led", "LED management" }, - { ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" }, - { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" }, { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, + { ATH5K_DEBUG_DMA, "dma", "dma start/stop" }, { ATH5K_DEBUG_ANI, "ani", "adaptive noise immunity" }, { ATH5K_DEBUG_DESC, "desc", "descriptor chains" }, { ATH5K_DEBUG_ANY, "all", "show all debug levels" }, @@ -320,23 +314,23 @@ static const struct { static ssize_t read_file_debug(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = file->private_data; char buf[700]; unsigned int len = 0; unsigned int i; - len += snprintf(buf+len, sizeof(buf)-len, - "DEBUG LEVEL: 0x%08x\n\n", sc->debug.level); + len += snprintf(buf + len, sizeof(buf) - len, + "DEBUG LEVEL: 0x%08x\n\n", ah->debug.level); for (i = 0; i < ARRAY_SIZE(dbg_info) - 1; i++) { - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "%10s %c 0x%08x - %s\n", dbg_info[i].name, - sc->debug.level & dbg_info[i].level ? '+' : ' ', + ah->debug.level & dbg_info[i].level ? '+' : ' ', dbg_info[i].level, dbg_info[i].desc); } - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "%10s %c 0x%08x - %s\n", dbg_info[i].name, - sc->debug.level == dbg_info[i].level ? '+' : ' ', + ah->debug.level == dbg_info[i].level ? '+' : ' ', dbg_info[i].level, dbg_info[i].desc); if (len > sizeof(buf)) @@ -349,17 +343,19 @@ static ssize_t write_file_debug(struct file *file, const char __user *userbuf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = file->private_data; unsigned int i; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; for (i = 0; i < ARRAY_SIZE(dbg_info); i++) { if (strncmp(buf, dbg_info[i].name, strlen(dbg_info[i].name)) == 0) { - sc->debug.level ^= dbg_info[i].level; /* toggle bit */ + ah->debug.level ^= dbg_info[i].level; /* toggle bit */ break; } } @@ -369,7 +365,7 @@ static ssize_t write_file_debug(struct file *file, static const struct file_operations fops_debug = { .read = read_file_debug, .write = write_file_debug, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -380,66 +376,66 @@ static const struct file_operations fops_debug = { static ssize_t read_file_antenna(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = file->private_data; char buf[700]; unsigned int len = 0; unsigned int i; unsigned int v; - len += snprintf(buf+len, sizeof(buf)-len, "antenna mode\t%d\n", - sc->ah->ah_ant_mode); - len += snprintf(buf+len, sizeof(buf)-len, "default antenna\t%d\n", - sc->ah->ah_def_ant); - len += snprintf(buf+len, sizeof(buf)-len, "tx antenna\t%d\n", - sc->ah->ah_tx_ant); + len += snprintf(buf + len, sizeof(buf) - len, "antenna mode\t%d\n", + ah->ah_ant_mode); + len += snprintf(buf + len, sizeof(buf) - len, "default antenna\t%d\n", + ah->ah_def_ant); + len += snprintf(buf + len, sizeof(buf) - len, "tx antenna\t%d\n", + ah->ah_tx_ant); - len += snprintf(buf+len, sizeof(buf)-len, "\nANTENNA\t\tRX\tTX\n"); - for (i = 1; i < ARRAY_SIZE(sc->stats.antenna_rx); i++) { - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nANTENNA\t\tRX\tTX\n"); + for (i = 1; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) { + len += snprintf(buf + len, sizeof(buf) - len, "[antenna %d]\t%d\t%d\n", - i, sc->stats.antenna_rx[i], sc->stats.antenna_tx[i]); + i, ah->stats.antenna_rx[i], ah->stats.antenna_tx[i]); } - len += snprintf(buf+len, sizeof(buf)-len, "[invalid]\t%d\t%d\n", - sc->stats.antenna_rx[0], sc->stats.antenna_tx[0]); + len += snprintf(buf + len, sizeof(buf) - len, "[invalid]\t%d\t%d\n", + ah->stats.antenna_rx[0], ah->stats.antenna_tx[0]); - v = ath5k_hw_reg_read(sc->ah, AR5K_DEFAULT_ANTENNA); - len += snprintf(buf+len, sizeof(buf)-len, + v = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + len += snprintf(buf + len, sizeof(buf) - len, "\nAR5K_DEFAULT_ANTENNA\t0x%08x\n", v); - v = ath5k_hw_reg_read(sc->ah, AR5K_STA_ID1); - len += snprintf(buf+len, sizeof(buf)-len, + v = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_STA_ID1_DEFAULT_ANTENNA\t%d\n", (v & AR5K_STA_ID1_DEFAULT_ANTENNA) != 0); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_STA_ID1_DESC_ANTENNA\t%d\n", (v & AR5K_STA_ID1_DESC_ANTENNA) != 0); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_STA_ID1_RTS_DEF_ANTENNA\t%d\n", (v & AR5K_STA_ID1_RTS_DEF_ANTENNA) != 0); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_STA_ID1_SELFGEN_DEF_ANT\t%d\n", (v & AR5K_STA_ID1_SELFGEN_DEF_ANT) != 0); - v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_AGCCTL); - len += snprintf(buf+len, sizeof(buf)-len, + v = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL); + len += snprintf(buf + len, sizeof(buf) - len, "\nAR5K_PHY_AGCCTL_OFDM_DIV_DIS\t%d\n", (v & AR5K_PHY_AGCCTL_OFDM_DIV_DIS) != 0); - v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_RESTART); - len += snprintf(buf+len, sizeof(buf)-len, + v = ath5k_hw_reg_read(ah, AR5K_PHY_RESTART); + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHY_RESTART_DIV_GC\t\t%x\n", (v & AR5K_PHY_RESTART_DIV_GC) >> AR5K_PHY_RESTART_DIV_GC_S); - v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_FAST_ANT_DIV); - len += snprintf(buf+len, sizeof(buf)-len, + v = ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ANT_DIV); + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHY_FAST_ANT_DIV_EN\t%d\n", (v & AR5K_PHY_FAST_ANT_DIV_EN) != 0); - v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_ANT_SWITCH_TABLE_0); - len += snprintf(buf+len, sizeof(buf)-len, + v = ath5k_hw_reg_read(ah, AR5K_PHY_ANT_SWITCH_TABLE_0); + len += snprintf(buf + len, sizeof(buf) - len, "\nAR5K_PHY_ANT_SWITCH_TABLE_0\t0x%08x\n", v); - v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_ANT_SWITCH_TABLE_1); - len += snprintf(buf+len, sizeof(buf)-len, + v = ath5k_hw_reg_read(ah, AR5K_PHY_ANT_SWITCH_TABLE_1); + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHY_ANT_SWITCH_TABLE_1\t0x%08x\n", v); if (len > sizeof(buf)) @@ -452,28 +448,30 @@ static ssize_t write_file_antenna(struct file *file, const char __user *userbuf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = file->private_data; unsigned int i; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "diversity", 9) == 0) { - ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_DEFAULT); - printk(KERN_INFO "ath5k debug: enable diversity\n"); + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); + pr_info("debug: enable diversity\n"); } else if (strncmp(buf, "fixed-a", 7) == 0) { - ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_A); - printk(KERN_INFO "ath5k debugfs: fixed antenna A\n"); + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A); + pr_info("debug: fixed antenna A\n"); } else if (strncmp(buf, "fixed-b", 7) == 0) { - ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_B); - printk(KERN_INFO "ath5k debug: fixed antenna B\n"); + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B); + pr_info("debug: fixed antenna B\n"); } else if (strncmp(buf, "clear", 5) == 0) { - for (i = 0; i < ARRAY_SIZE(sc->stats.antenna_rx); i++) { - sc->stats.antenna_rx[i] = 0; - sc->stats.antenna_tx[i] = 0; + for (i = 0; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) { + ah->stats.antenna_rx[i] = 0; + ah->stats.antenna_tx[i] = 0; } - printk(KERN_INFO "ath5k debug: cleared antenna stats\n"); + pr_info("debug: cleared antenna stats\n"); } return count; } @@ -481,7 +479,7 @@ static ssize_t write_file_antenna(struct file *file, static const struct file_operations fops_antenna = { .read = read_file_antenna, .write = write_file_antenna, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -491,42 +489,42 @@ static const struct file_operations fops_antenna = { static ssize_t read_file_misc(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = file->private_data; char buf[700]; unsigned int len = 0; - u32 filt = ath5k_hw_get_rx_filter(sc->ah); + u32 filt = ath5k_hw_get_rx_filter(ah); - len += snprintf(buf+len, sizeof(buf)-len, "bssid-mask: %pM\n", - sc->bssidmask); - len += snprintf(buf+len, sizeof(buf)-len, "filter-flags: 0x%x ", + len += snprintf(buf + len, sizeof(buf) - len, "bssid-mask: %pM\n", + ah->bssidmask); + len += snprintf(buf + len, sizeof(buf) - len, "filter-flags: 0x%x ", filt); if (filt & AR5K_RX_FILTER_UCAST) - len += snprintf(buf+len, sizeof(buf)-len, " UCAST"); + len += snprintf(buf + len, sizeof(buf) - len, " UCAST"); if (filt & AR5K_RX_FILTER_MCAST) - len += snprintf(buf+len, sizeof(buf)-len, " MCAST"); + len += snprintf(buf + len, sizeof(buf) - len, " MCAST"); if (filt & AR5K_RX_FILTER_BCAST) - len += snprintf(buf+len, sizeof(buf)-len, " BCAST"); + len += snprintf(buf + len, sizeof(buf) - len, " BCAST"); if (filt & AR5K_RX_FILTER_CONTROL) - len += snprintf(buf+len, sizeof(buf)-len, " CONTROL"); + len += snprintf(buf + len, sizeof(buf) - len, " CONTROL"); if (filt & AR5K_RX_FILTER_BEACON) - len += snprintf(buf+len, sizeof(buf)-len, " BEACON"); + len += snprintf(buf + len, sizeof(buf) - len, " BEACON"); if (filt & AR5K_RX_FILTER_PROM) - len += snprintf(buf+len, sizeof(buf)-len, " PROM"); + len += snprintf(buf + len, sizeof(buf) - len, " PROM"); if (filt & AR5K_RX_FILTER_XRPOLL) - len += snprintf(buf+len, sizeof(buf)-len, " XRPOLL"); + len += snprintf(buf + len, sizeof(buf) - len, " XRPOLL"); if (filt & AR5K_RX_FILTER_PROBEREQ) - len += snprintf(buf+len, sizeof(buf)-len, " PROBEREQ"); + len += snprintf(buf + len, sizeof(buf) - len, " PROBEREQ"); if (filt & AR5K_RX_FILTER_PHYERR_5212) - len += snprintf(buf+len, sizeof(buf)-len, " PHYERR-5212"); + len += snprintf(buf + len, sizeof(buf) - len, " PHYERR-5212"); if (filt & AR5K_RX_FILTER_RADARERR_5212) - len += snprintf(buf+len, sizeof(buf)-len, " RADARERR-5212"); + len += snprintf(buf + len, sizeof(buf) - len, " RADARERR-5212"); if (filt & AR5K_RX_FILTER_PHYERR_5211) - snprintf(buf+len, sizeof(buf)-len, " PHYERR-5211"); + snprintf(buf + len, sizeof(buf) - len, " PHYERR-5211"); if (filt & AR5K_RX_FILTER_RADARERR_5211) - len += snprintf(buf+len, sizeof(buf)-len, " RADARERR-5211"); + len += snprintf(buf + len, sizeof(buf) - len, " RADARERR-5211"); - len += snprintf(buf+len, sizeof(buf)-len, "\nopmode: %s (%d)\n", - ath_opmode_to_string(sc->opmode), sc->opmode); + len += snprintf(buf + len, sizeof(buf) - len, "\nopmode: %s (%d)\n", + ath_opmode_to_string(ah->opmode), ah->opmode); if (len > sizeof(buf)) len = sizeof(buf); @@ -536,7 +534,7 @@ static ssize_t read_file_misc(struct file *file, char __user *user_buf, static const struct file_operations fops_misc = { .read = read_file_misc, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, }; @@ -546,71 +544,71 @@ static const struct file_operations fops_misc = { static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; - struct ath5k_statistics *st = &sc->stats; + struct ath5k_hw *ah = file->private_data; + struct ath5k_statistics *st = &ah->stats; char buf[700]; unsigned int len = 0; int i; - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "RX\n---------------------\n"); - len += snprintf(buf+len, sizeof(buf)-len, "CRC\t%u\t(%u%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, "CRC\t%u\t(%u%%)\n", st->rxerr_crc, st->rx_all_count > 0 ? - st->rxerr_crc*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "PHY\t%u\t(%u%%)\n", + st->rxerr_crc * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "PHY\t%u\t(%u%%)\n", st->rxerr_phy, st->rx_all_count > 0 ? - st->rxerr_phy*100/st->rx_all_count : 0); + st->rxerr_phy * 100 / st->rx_all_count : 0); for (i = 0; i < 32; i++) { if (st->rxerr_phy_code[i]) - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, " phy_err[%u]\t%u\n", i, st->rxerr_phy_code[i]); } - len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%u\t(%u%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n", st->rxerr_fifo, st->rx_all_count > 0 ? - st->rxerr_fifo*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "decrypt\t%u\t(%u%%)\n", + st->rxerr_fifo * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "decrypt\t%u\t(%u%%)\n", st->rxerr_decrypt, st->rx_all_count > 0 ? - st->rxerr_decrypt*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "MIC\t%u\t(%u%%)\n", + st->rxerr_decrypt * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "MIC\t%u\t(%u%%)\n", st->rxerr_mic, st->rx_all_count > 0 ? - st->rxerr_mic*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "process\t%u\t(%u%%)\n", + st->rxerr_mic * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "process\t%u\t(%u%%)\n", st->rxerr_proc, st->rx_all_count > 0 ? - st->rxerr_proc*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "jumbo\t%u\t(%u%%)\n", + st->rxerr_proc * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "jumbo\t%u\t(%u%%)\n", st->rxerr_jumbo, st->rx_all_count > 0 ? - st->rxerr_jumbo*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "[RX all\t%u]\n", + st->rxerr_jumbo * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "[RX all\t%u]\n", st->rx_all_count); - len += snprintf(buf+len, sizeof(buf)-len, "RX-all-bytes\t%u\n", + len += snprintf(buf + len, sizeof(buf) - len, "RX-all-bytes\t%u\n", st->rx_bytes_count); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nTX\n---------------------\n"); - len += snprintf(buf+len, sizeof(buf)-len, "retry\t%u\t(%u%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, "retry\t%u\t(%u%%)\n", st->txerr_retry, st->tx_all_count > 0 ? - st->txerr_retry*100/st->tx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%u\t(%u%%)\n", + st->txerr_retry * 100 / st->tx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n", st->txerr_fifo, st->tx_all_count > 0 ? - st->txerr_fifo*100/st->tx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "filter\t%u\t(%u%%)\n", + st->txerr_fifo * 100 / st->tx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "filter\t%u\t(%u%%)\n", st->txerr_filt, st->tx_all_count > 0 ? - st->txerr_filt*100/st->tx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "[TX all\t%u]\n", + st->txerr_filt * 100 / st->tx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "[TX all\t%u]\n", st->tx_all_count); - len += snprintf(buf+len, sizeof(buf)-len, "TX-all-bytes\t%u\n", + len += snprintf(buf + len, sizeof(buf) - len, "TX-all-bytes\t%u\n", st->tx_bytes_count); if (len > sizeof(buf)) @@ -623,13 +621,15 @@ static ssize_t write_file_frameerrors(struct file *file, const char __user *userbuf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; - struct ath5k_statistics *st = &sc->stats; + struct ath5k_hw *ah = file->private_data; + struct ath5k_statistics *st = &ah->stats; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "clear", 5) == 0) { st->rxerr_crc = 0; st->rxerr_phy = 0; @@ -643,7 +643,7 @@ static ssize_t write_file_frameerrors(struct file *file, st->txerr_fifo = 0; st->txerr_filt = 0; st->tx_all_count = 0; - printk(KERN_INFO "ath5k debug: cleared frameerrors stats\n"); + pr_info("debug: cleared frameerrors stats\n"); } return count; } @@ -651,7 +651,7 @@ static ssize_t write_file_frameerrors(struct file *file, static const struct file_operations fops_frameerrors = { .read = read_file_frameerrors, .write = write_file_frameerrors, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -662,100 +662,104 @@ static const struct file_operations fops_frameerrors = { static ssize_t read_file_ani(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; - struct ath5k_statistics *st = &sc->stats; - struct ath5k_ani_state *as = &sc->ani_state; + struct ath5k_hw *ah = file->private_data; + struct ath5k_statistics *st = &ah->stats; + struct ath5k_ani_state *as = &ah->ani_state; char buf[700]; unsigned int len = 0; - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "HW has PHY error counters:\t%s\n", - sc->ah->ah_capabilities.cap_has_phyerr_counters ? + ah->ah_capabilities.cap_has_phyerr_counters ? "yes" : "no"); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "HW max spur immunity level:\t%d\n", as->max_spur_level); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nANI state\n--------------------------------------------\n"); - len += snprintf(buf+len, sizeof(buf)-len, "operating mode:\t\t\t"); + len += snprintf(buf + len, sizeof(buf) - len, "operating mode:\t\t\t"); switch (as->ani_mode) { case ATH5K_ANI_MODE_OFF: - len += snprintf(buf+len, sizeof(buf)-len, "OFF\n"); + len += snprintf(buf + len, sizeof(buf) - len, "OFF\n"); break; case ATH5K_ANI_MODE_MANUAL_LOW: - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "MANUAL LOW\n"); break; case ATH5K_ANI_MODE_MANUAL_HIGH: - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "MANUAL HIGH\n"); break; case ATH5K_ANI_MODE_AUTO: - len += snprintf(buf+len, sizeof(buf)-len, "AUTO\n"); + len += snprintf(buf + len, sizeof(buf) - len, "AUTO\n"); break; default: - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "??? (not good)\n"); break; } - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "noise immunity level:\t\t%d\n", as->noise_imm_level); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "spur immunity level:\t\t%d\n", as->spur_level); - len += snprintf(buf+len, sizeof(buf)-len, "firstep level:\t\t\t%d\n", + len += snprintf(buf + len, sizeof(buf) - len, + "firstep level:\t\t\t%d\n", as->firstep_level); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "OFDM weak signal detection:\t%s\n", as->ofdm_weak_sig ? "on" : "off"); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "CCK weak signal detection:\t%s\n", as->cck_weak_sig ? "on" : "off"); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nMIB INTERRUPTS:\t\t%u\n", st->mib_intr); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "beacon RSSI average:\t%d\n", - (int)ewma_read(&sc->ah->ah_beacon_rssi_avg)); + (int)ewma_read(&ah->ah_beacon_rssi_avg)); #define CC_PRINT(_struct, _field) \ _struct._field, \ _struct.cycles > 0 ? \ - _struct._field*100/_struct.cycles : 0 + _struct._field * 100 / _struct.cycles : 0 - len += snprintf(buf+len, sizeof(buf)-len, "profcnt tx\t\t%u\t(%d%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, + "profcnt tx\t\t%u\t(%d%%)\n", CC_PRINT(as->last_cc, tx_frame)); - len += snprintf(buf+len, sizeof(buf)-len, "profcnt rx\t\t%u\t(%d%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, + "profcnt rx\t\t%u\t(%d%%)\n", CC_PRINT(as->last_cc, rx_frame)); - len += snprintf(buf+len, sizeof(buf)-len, "profcnt busy\t\t%u\t(%d%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, + "profcnt busy\t\t%u\t(%d%%)\n", CC_PRINT(as->last_cc, rx_busy)); #undef CC_PRINT - len += snprintf(buf+len, sizeof(buf)-len, "profcnt cycles\t\t%u\n", + len += snprintf(buf + len, sizeof(buf) - len, "profcnt cycles\t\t%u\n", as->last_cc.cycles); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "listen time\t\t%d\tlast: %d\n", as->listen_time, as->last_listen); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "OFDM errors\t\t%u\tlast: %u\tsum: %u\n", as->ofdm_errors, as->last_ofdm_errors, as->sum_ofdm_errors); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "CCK errors\t\t%u\tlast: %u\tsum: %u\n", as->cck_errors, as->last_cck_errors, as->sum_cck_errors); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHYERR_CNT1\t%x\t(=%d)\n", - ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1), + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1), ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - - ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1))); - len += snprintf(buf+len, sizeof(buf)-len, + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1))); + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHYERR_CNT2\t%x\t(=%d)\n", - ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT2), + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2), ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - - ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT2))); + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2))); if (len > sizeof(buf)) len = sizeof(buf); @@ -767,42 +771,44 @@ static ssize_t write_file_ani(struct file *file, const char __user *userbuf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "sens-low", 8) == 0) { - ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_MANUAL_HIGH); + ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_HIGH); } else if (strncmp(buf, "sens-high", 9) == 0) { - ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_MANUAL_LOW); + ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_LOW); } else if (strncmp(buf, "ani-off", 7) == 0) { - ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_OFF); + ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF); } else if (strncmp(buf, "ani-on", 6) == 0) { - ath5k_ani_init(sc->ah, ATH5K_ANI_MODE_AUTO); + ath5k_ani_init(ah, ATH5K_ANI_MODE_AUTO); } else if (strncmp(buf, "noise-low", 9) == 0) { - ath5k_ani_set_noise_immunity_level(sc->ah, 0); + ath5k_ani_set_noise_immunity_level(ah, 0); } else if (strncmp(buf, "noise-high", 10) == 0) { - ath5k_ani_set_noise_immunity_level(sc->ah, + ath5k_ani_set_noise_immunity_level(ah, ATH5K_ANI_MAX_NOISE_IMM_LVL); } else if (strncmp(buf, "spur-low", 8) == 0) { - ath5k_ani_set_spur_immunity_level(sc->ah, 0); + ath5k_ani_set_spur_immunity_level(ah, 0); } else if (strncmp(buf, "spur-high", 9) == 0) { - ath5k_ani_set_spur_immunity_level(sc->ah, - sc->ani_state.max_spur_level); + ath5k_ani_set_spur_immunity_level(ah, + ah->ani_state.max_spur_level); } else if (strncmp(buf, "fir-low", 7) == 0) { - ath5k_ani_set_firstep_level(sc->ah, 0); + ath5k_ani_set_firstep_level(ah, 0); } else if (strncmp(buf, "fir-high", 8) == 0) { - ath5k_ani_set_firstep_level(sc->ah, ATH5K_ANI_MAX_FIRSTEP_LVL); + ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL); } else if (strncmp(buf, "ofdm-off", 8) == 0) { - ath5k_ani_set_ofdm_weak_signal_detection(sc->ah, false); + ath5k_ani_set_ofdm_weak_signal_detection(ah, false); } else if (strncmp(buf, "ofdm-on", 7) == 0) { - ath5k_ani_set_ofdm_weak_signal_detection(sc->ah, true); + ath5k_ani_set_ofdm_weak_signal_detection(ah, true); } else if (strncmp(buf, "cck-off", 7) == 0) { - ath5k_ani_set_cck_weak_signal_detection(sc->ah, false); + ath5k_ani_set_cck_weak_signal_detection(ah, false); } else if (strncmp(buf, "cck-on", 6) == 0) { - ath5k_ani_set_cck_weak_signal_detection(sc->ah, true); + ath5k_ani_set_cck_weak_signal_detection(ah, true); } return count; } @@ -810,7 +816,7 @@ static ssize_t write_file_ani(struct file *file, static const struct file_operations fops_ani = { .read = read_file_ani, .write = write_file_ani, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; @@ -821,7 +827,7 @@ static const struct file_operations fops_ani = { static ssize_t read_file_queue(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = file->private_data; char buf[700]; unsigned int len = 0; @@ -829,13 +835,13 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf, struct ath5k_buf *bf, *bf0; int i, n; - len += snprintf(buf+len, sizeof(buf)-len, - "available txbuffers: %d\n", sc->txbuf_len); + len += snprintf(buf + len, sizeof(buf) - len, + "available txbuffers: %d\n", ah->txbuf_len); - for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) { - txq = &sc->txqs[i]; + for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { + txq = &ah->txqs[i]; - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "%02d: %ssetup\n", i, txq->setup ? "" : "not "); if (!txq->setup) @@ -847,9 +853,9 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf, n++; spin_unlock_bh(&txq->lock); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, " len: %d bufs: %d\n", txq->txq_len, n); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, " stuck: %d\n", txq->txq_stuck); } @@ -863,16 +869,18 @@ static ssize_t write_file_queue(struct file *file, const char __user *userbuf, size_t count, loff_t *ppos) { - struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = file->private_data; char buf[20]; - if (copy_from_user(buf, userbuf, min(count, sizeof(buf)))) + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) return -EFAULT; + buf[count] = '\0'; if (strncmp(buf, "start", 5) == 0) - ieee80211_wake_queues(sc->hw); + ieee80211_wake_queues(ah->hw); else if (strncmp(buf, "stop", 4) == 0) - ieee80211_stop_queues(sc->hw); + ieee80211_stop_queues(ah->hw); return count; } @@ -881,88 +889,64 @@ static ssize_t write_file_queue(struct file *file, static const struct file_operations fops_queue = { .read = read_file_queue, .write = write_file_queue, - .open = ath5k_debugfs_open, + .open = simple_open, .owner = THIS_MODULE, .llseek = default_llseek, }; void -ath5k_debug_init_device(struct ath5k_softc *sc) +ath5k_debug_init_device(struct ath5k_hw *ah) { - sc->debug.level = ath5k_debug; + struct dentry *phydir; - sc->debug.debugfs_phydir = debugfs_create_dir("ath5k", - sc->hw->wiphy->debugfsdir); + ah->debug.level = ath5k_debug; - sc->debug.debugfs_debug = debugfs_create_file("debug", - S_IWUSR | S_IRUSR, - sc->debug.debugfs_phydir, sc, &fops_debug); + phydir = debugfs_create_dir("ath5k", ah->hw->wiphy->debugfsdir); + if (!phydir) + return; - sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUSR, - sc->debug.debugfs_phydir, sc, &fops_registers); + debugfs_create_file("debug", S_IWUSR | S_IRUSR, phydir, ah, + &fops_debug); - sc->debug.debugfs_beacon = debugfs_create_file("beacon", - S_IWUSR | S_IRUSR, - sc->debug.debugfs_phydir, sc, &fops_beacon); + debugfs_create_file("registers", S_IRUSR, phydir, ah, &fops_registers); - sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR, - sc->debug.debugfs_phydir, sc, &fops_reset); + debugfs_create_file("beacon", S_IWUSR | S_IRUSR, phydir, ah, + &fops_beacon); - sc->debug.debugfs_antenna = debugfs_create_file("antenna", - S_IWUSR | S_IRUSR, - sc->debug.debugfs_phydir, sc, &fops_antenna); + debugfs_create_file("reset", S_IWUSR, phydir, ah, &fops_reset); - sc->debug.debugfs_misc = debugfs_create_file("misc", - S_IRUSR, - sc->debug.debugfs_phydir, sc, &fops_misc); + debugfs_create_file("antenna", S_IWUSR | S_IRUSR, phydir, ah, + &fops_antenna); - sc->debug.debugfs_frameerrors = debugfs_create_file("frameerrors", - S_IWUSR | S_IRUSR, - sc->debug.debugfs_phydir, sc, - &fops_frameerrors); + debugfs_create_file("misc", S_IRUSR, phydir, ah, &fops_misc); - sc->debug.debugfs_ani = debugfs_create_file("ani", - S_IWUSR | S_IRUSR, - sc->debug.debugfs_phydir, sc, - &fops_ani); + debugfs_create_file("frameerrors", S_IWUSR | S_IRUSR, phydir, ah, + &fops_frameerrors); - sc->debug.debugfs_queue = debugfs_create_file("queue", - S_IWUSR | S_IRUSR, - sc->debug.debugfs_phydir, sc, - &fops_queue); -} + debugfs_create_file("ani", S_IWUSR | S_IRUSR, phydir, ah, &fops_ani); -void -ath5k_debug_finish_device(struct ath5k_softc *sc) -{ - debugfs_remove(sc->debug.debugfs_debug); - debugfs_remove(sc->debug.debugfs_registers); - debugfs_remove(sc->debug.debugfs_beacon); - debugfs_remove(sc->debug.debugfs_reset); - debugfs_remove(sc->debug.debugfs_antenna); - debugfs_remove(sc->debug.debugfs_misc); - debugfs_remove(sc->debug.debugfs_frameerrors); - debugfs_remove(sc->debug.debugfs_ani); - debugfs_remove(sc->debug.debugfs_queue); - debugfs_remove(sc->debug.debugfs_phydir); -} + debugfs_create_file("queue", S_IWUSR | S_IRUSR, phydir, ah, + &fops_queue); + debugfs_create_bool("32khz_clock", S_IWUSR | S_IRUSR, phydir, + &ah->ah_use_32khz_clock); +} /* functions used in other places */ void -ath5k_debug_dump_bands(struct ath5k_softc *sc) +ath5k_debug_dump_bands(struct ath5k_hw *ah) { unsigned int b, i; - if (likely(!(sc->debug.level & ATH5K_DEBUG_DUMPBANDS))) + if (likely(!(ah->debug.level & ATH5K_DEBUG_DUMPBANDS))) return; - BUG_ON(!sc->sbands); + BUG_ON(!ah->sbands); for (b = 0; b < IEEE80211_NUM_BANDS; b++) { - struct ieee80211_supported_band *band = &sc->sbands[b]; + struct ieee80211_supported_band *band = &ah->sbands[b]; char bname[6]; switch (band->band) { case IEEE80211_BAND_2GHZ: @@ -1012,59 +996,41 @@ ath5k_debug_printrxbuf(struct ath5k_buf *bf, int done, } void -ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) +ath5k_debug_printrxbuffs(struct ath5k_hw *ah) { struct ath5k_desc *ds; struct ath5k_buf *bf; struct ath5k_rx_status rs = {}; int status; - if (likely(!(sc->debug.level & ATH5K_DEBUG_DESC))) + if (likely(!(ah->debug.level & ATH5K_DEBUG_DESC))) return; printk(KERN_DEBUG "rxdp %x, rxlink %p\n", - ath5k_hw_get_rxdp(ah), sc->rxlink); + ath5k_hw_get_rxdp(ah), ah->rxlink); - spin_lock_bh(&sc->rxbuflock); - list_for_each_entry(bf, &sc->rxbuf, list) { + spin_lock_bh(&ah->rxbuflock); + list_for_each_entry(bf, &ah->rxbuf, list) { ds = bf->desc; status = ah->ah_proc_rx_desc(ah, ds, &rs); if (!status) ath5k_debug_printrxbuf(bf, status == 0, &rs); } - spin_unlock_bh(&sc->rxbuflock); -} - -void -ath5k_debug_dump_skb(struct ath5k_softc *sc, - struct sk_buff *skb, const char *prefix, int tx) -{ - char buf[16]; - - if (likely(!((tx && (sc->debug.level & ATH5K_DEBUG_DUMP_TX)) || - (!tx && (sc->debug.level & ATH5K_DEBUG_DUMP_RX))))) - return; - - snprintf(buf, sizeof(buf), "%s %s", wiphy_name(sc->hw->wiphy), prefix); - - print_hex_dump_bytes(buf, DUMP_PREFIX_NONE, skb->data, - min(200U, skb->len)); - - printk(KERN_DEBUG "\n"); + spin_unlock_bh(&ah->rxbuflock); } void -ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf) +ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf) { struct ath5k_desc *ds = bf->desc; struct ath5k_hw_5212_tx_desc *td = &ds->ud.ds_tx5212; struct ath5k_tx_status ts = {}; int done; - if (likely(!(sc->debug.level & ATH5K_DEBUG_DESC))) + if (likely(!(ah->debug.level & ATH5K_DEBUG_DESC))) return; - done = sc->ah->ah_proc_tx_desc(sc->ah, bf->desc, &ts); + done = ah->ah_proc_tx_desc(ah, bf->desc, &ts); printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x " "%08x %c\n", ds, (unsigned long long)bf->daddr, ds->ds_link, @@ -1073,5 +1039,3 @@ ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf) td->tx_stat.tx_status_0, td->tx_stat.tx_status_1, done ? ' ' : (ts.ts_status == 0) ? '*' : '!'); } - -#endif /* ifdef CONFIG_ATH5K_DEBUG */ diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h index 236edbd2507..0a3f916a1ef 100644 --- a/drivers/net/wireless/ath/ath5k/debug.h +++ b/drivers/net/wireless/ath/ath5k/debug.h @@ -61,24 +61,12 @@ #ifndef _ATH5K_DEBUG_H #define _ATH5K_DEBUG_H -struct ath5k_softc; struct ath5k_hw; struct sk_buff; struct ath5k_buf; struct ath5k_dbg_info { unsigned int level; /* debug level */ - /* debugfs entries */ - struct dentry *debugfs_phydir; - struct dentry *debugfs_debug; - struct dentry *debugfs_registers; - struct dentry *debugfs_beacon; - struct dentry *debugfs_reset; - struct dentry *debugfs_antenna; - struct dentry *debugfs_misc; - struct dentry *debugfs_frameerrors; - struct dentry *debugfs_ani; - struct dentry *debugfs_queue; }; /** @@ -95,6 +83,7 @@ struct ath5k_dbg_info { * @ATH5K_DEBUG_DUMP_RX: print received skb content * @ATH5K_DEBUG_DUMP_TX: print transmit skb content * @ATH5K_DEBUG_DUMPBANDS: dump bands + * @ATH5K_DEBUG_DMA: debug dma start/stop * @ATH5K_DEBUG_TRACE: trace function calls * @ATH5K_DEBUG_DESC: descriptor setup * @ATH5K_DEBUG_ANY: show at any debug level @@ -115,9 +104,8 @@ enum ath5k_debug_level { ATH5K_DEBUG_CALIBRATE = 0x00000020, ATH5K_DEBUG_TXPOWER = 0x00000040, ATH5K_DEBUG_LED = 0x00000080, - ATH5K_DEBUG_DUMP_RX = 0x00000100, - ATH5K_DEBUG_DUMP_TX = 0x00000200, ATH5K_DEBUG_DUMPBANDS = 0x00000400, + ATH5K_DEBUG_DMA = 0x00000800, ATH5K_DEBUG_ANI = 0x00002000, ATH5K_DEBUG_DESC = 0x00004000, ATH5K_DEBUG_ANY = 0xffffffff @@ -138,53 +126,39 @@ enum ath5k_debug_level { } while (0) void -ath5k_debug_init_device(struct ath5k_softc *sc); +ath5k_debug_init_device(struct ath5k_hw *ah); void -ath5k_debug_finish_device(struct ath5k_softc *sc); +ath5k_debug_printrxbuffs(struct ath5k_hw *ah); void -ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah); +ath5k_debug_dump_bands(struct ath5k_hw *ah); void -ath5k_debug_dump_bands(struct ath5k_softc *sc); - -void -ath5k_debug_dump_skb(struct ath5k_softc *sc, - struct sk_buff *skb, const char *prefix, int tx); - -void -ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf); +ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf); #else /* no debugging */ #include <linux/compiler.h> -static inline void __attribute__ ((format (printf, 3, 4))) -ATH5K_DBG(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) {} +static inline __printf(3, 4) void +ATH5K_DBG(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...) {} -static inline void __attribute__ ((format (printf, 3, 4))) -ATH5K_DBG_UNLIMIT(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) +static inline __printf(3, 4) void +ATH5K_DBG_UNLIMIT(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...) {} static inline void -ath5k_debug_init_device(struct ath5k_softc *sc) {} - -static inline void -ath5k_debug_finish_device(struct ath5k_softc *sc) {} - -static inline void -ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) {} +ath5k_debug_init_device(struct ath5k_hw *ah) {} static inline void -ath5k_debug_dump_bands(struct ath5k_softc *sc) {} +ath5k_debug_printrxbuffs(struct ath5k_hw *ah) {} static inline void -ath5k_debug_dump_skb(struct ath5k_softc *sc, - struct sk_buff *skb, const char *prefix, int tx) {} +ath5k_debug_dump_bands(struct ath5k_hw *ah) {} static inline void -ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf) {} +ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf) {} #endif /* ifdef CONFIG_ATH5K_DEBUG */ diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 43244382f21..bd8d4392d68 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -21,25 +21,68 @@ Hardware Descriptor Functions \******************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" -/* - * TX Descriptors + +/** + * DOC: Hardware descriptor functions + * + * Here we handle the processing of the low-level hw descriptors + * that hw reads and writes via DMA for each TX and RX attempt (that means + * we can also have descriptors for failed TX/RX tries). We have two kind of + * descriptors for RX and TX, control descriptors tell the hw how to send or + * receive a packet where to read/write it from/to etc and status descriptors + * that contain information about how the packet was sent or received (errors + * included). + * + * Descriptor format is not exactly the same for each MAC chip version so we + * have function pointers on &struct ath5k_hw we initialize at runtime based on + * the chip used. */ -/* - * Initialize the 2-word tx control descriptor on 5210/5211 + +/************************\ +* TX Control descriptors * +\************************/ + +/** + * ath5k_hw_setup_2word_tx_desc() - Initialize a 2-word tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @pkt_len: Frame length in bytes + * @hdr_len: Header length in bytes (only used on AR5210) + * @padsize: Any padding we've added to the frame length + * @type: One of enum ath5k_pkt_type + * @tx_power: Tx power in 0.5dB steps + * @tx_rate0: HW idx for transmission rate + * @tx_tries0: Max number of retransmissions + * @key_index: Index on key table to use for encryption + * @antenna_mode: Which antenna to use (0 for auto) + * @flags: One of AR5K_TXDESC_* flags (desc.h) + * @rtscts_rate: HW idx for RTS/CTS transmission rate + * @rtscts_duration: What to put on duration field on the header of RTS/CTS + * + * Internal function to initialize a 2-Word TX control descriptor + * found on AR5210 and AR5211 MACs chips. + * + * Returns 0 on success or -EINVAL on false input */ static int -ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int pkt_len, unsigned int hdr_len, int padsize, - enum ath5k_pkt_type type, - unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, - unsigned int key_index, unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, unsigned int rtscts_duration) +ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, + int padsize, + enum ath5k_pkt_type type, + unsigned int tx_power, + unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, + unsigned int antenna_mode, + unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) { u32 frame_type; struct ath5k_hw_2w_tx_ctl *tx_ctl; @@ -50,16 +93,16 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, /* * Validate input * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends + * - A zero rate will put the HW into a mode where it continuously sends * noise on the channel, so it is important to avoid this. */ if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); + ATH5K_ERR(ah, "zero retries\n"); WARN_ON(1); return -EINVAL; } if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); + ATH5K_ERR(ah, "zero rate\n"); WARN_ON(1); return -EINVAL; } @@ -106,10 +149,13 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, case AR5K_PKT_TYPE_BEACON: case AR5K_PKT_TYPE_PROBE_RESP: frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + break; case AR5K_PKT_TYPE_PIFS: frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + break; default: frame_type = type; + break; } tx_ctl->tx_control_0 |= @@ -169,36 +215,65 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, return 0; } -/* - * Initialize the 4-word tx control descriptor on 5212 +/** + * ath5k_hw_setup_4word_tx_desc() - Initialize a 4-word tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @pkt_len: Frame length in bytes + * @hdr_len: Header length in bytes (only used on AR5210) + * @padsize: Any padding we've added to the frame length + * @type: One of enum ath5k_pkt_type + * @tx_power: Tx power in 0.5dB steps + * @tx_rate0: HW idx for transmission rate + * @tx_tries0: Max number of retransmissions + * @key_index: Index on key table to use for encryption + * @antenna_mode: Which antenna to use (0 for auto) + * @flags: One of AR5K_TXDESC_* flags (desc.h) + * @rtscts_rate: HW idx for RTS/CTS transmission rate + * @rtscts_duration: What to put on duration field on the header of RTS/CTS + * + * Internal function to initialize a 4-Word TX control descriptor + * found on AR5212 and later MACs chips. + * + * Returns 0 on success or -EINVAL on false input */ -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, - struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, - int padsize, - enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, - unsigned int tx_tries0, unsigned int key_index, - unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, - unsigned int rtscts_duration) +static int +ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, + int padsize, + enum ath5k_pkt_type type, + unsigned int tx_power, + unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, + unsigned int antenna_mode, + unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) { struct ath5k_hw_4w_tx_ctl *tx_ctl; unsigned int frame_len; + /* + * Use local variables for these to reduce load/store access on + * uncached memory + */ + u32 txctl0 = 0, txctl1 = 0, txctl2 = 0, txctl3 = 0; + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; /* * Validate input * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends + * - A zero rate will put the HW into a mode where it continuously sends * noise on the channel, so it is important to avoid this. */ if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); + ATH5K_ERR(ah, "zero retries\n"); WARN_ON(1); return -EINVAL; } if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); + ATH5K_ERR(ah, "zero rate\n"); WARN_ON(1); return -EINVAL; } @@ -207,8 +282,9 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, if (tx_power > AR5K_TUNE_MAX_TXPOWER) tx_power = AR5K_TUNE_MAX_TXPOWER; - /* Clear descriptor */ - memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); + /* Clear descriptor status area */ + memset(&desc->ud.ds_tx5212.tx_stat, 0, + sizeof(desc->ud.ds_tx5212.tx_stat)); /* Setup control descriptor */ @@ -220,7 +296,7 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) return -EINVAL; - tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; + txctl0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; /* Verify and set buffer length */ @@ -231,21 +307,17 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) return -EINVAL; - tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; + txctl1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | - AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= AR5K_REG_SM(type, - AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); - tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); - tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + txctl0 |= AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | + AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); + txctl1 |= AR5K_REG_SM(type, AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); + txctl2 = AR5K_REG_SM(tx_tries0, AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); + txctl3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; #define _TX_FLAGS(_c, _flag) \ if (flags & AR5K_TXDESC_##_flag) { \ - tx_ctl->tx_control_##_c |= \ - AR5K_4W_TX_DESC_CTL##_c##_##_flag; \ + txctl##_c |= AR5K_4W_TX_DESC_CTL##_c##_##_flag; \ } _TX_FLAGS(0, CLRDMASK); @@ -261,8 +333,8 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, * WEP crap */ if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, + txctl0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + txctl1 |= AR5K_REG_SM(key_index, AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_IDX); } @@ -273,22 +345,42 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, if ((flags & AR5K_TXDESC_RTSENA) && (flags & AR5K_TXDESC_CTSENA)) return -EINVAL; - tx_ctl->tx_control_2 |= rtscts_duration & - AR5K_4W_TX_DESC_CTL2_RTS_DURATION; - tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, + txctl2 |= rtscts_duration & AR5K_4W_TX_DESC_CTL2_RTS_DURATION; + txctl3 |= AR5K_REG_SM(rtscts_rate, AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); } + tx_ctl->tx_control_0 = txctl0; + tx_ctl->tx_control_1 = txctl1; + tx_ctl->tx_control_2 = txctl2; + tx_ctl->tx_control_3 = txctl3; + return 0; } -/* - * Initialize a 4-word multi rate retry tx control descriptor on 5212 +/** + * ath5k_hw_setup_mrr_tx_desc() - Initialize an MRR tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @tx_rate1: HW idx for rate used on transmission series 1 + * @tx_tries1: Max number of retransmissions for transmission series 1 + * @tx_rate2: HW idx for rate used on transmission series 2 + * @tx_tries2: Max number of retransmissions for transmission series 2 + * @tx_rate3: HW idx for rate used on transmission series 3 + * @tx_tries3: Max number of retransmissions for transmission series 3 + * + * Multi rate retry (MRR) tx control descriptors are available only on AR5212 + * MACs, they are part of the normal 4-word tx control descriptor (see above) + * but we handle them through a separate function for better abstraction. + * + * Returns 0 on success or -EINVAL on invalid input */ int -ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, - u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3) +ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + u_int tx_rate1, u_int tx_tries1, + u_int tx_rate2, u_int tx_tries2, + u_int tx_rate3, u_int tx_tries3) { struct ath5k_hw_4w_tx_ctl *tx_ctl; @@ -299,13 +391,13 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, /* * Rates can be 0 as long as the retry count is 0 too. * A zero rate and nonzero retry count will put the HW into a mode where - * it continously sends noise on the channel, so it is important to + * it continuously sends noise on the channel, so it is important to * avoid this. */ if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || (tx_rate2 == 0 && tx_tries2 != 0) || (tx_rate3 == 0 && tx_tries3 != 0))) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); + ATH5K_ERR(ah, "zero rate\n"); WARN_ON(1); return -EINVAL; } @@ -335,16 +427,24 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, return 0; } -/* - * Proccess the tx status descriptor on 5210/5211 + +/***********************\ +* TX Status descriptors * +\***********************/ + +/** + * ath5k_hw_proc_2word_tx_status() - Process a tx status descriptor on 5210/1 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @ts: The &struct ath5k_tx_status */ -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) +static int +ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_tx_status *ts) { - struct ath5k_hw_2w_tx_ctl *tx_ctl; struct ath5k_hw_tx_status *tx_status; - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; tx_status = &desc->ud.ds_tx5210.tx_stat; /* No frame has been send or error */ @@ -358,7 +458,7 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + ts->ts_final_retry = AR5K_REG_MS(tx_status->tx_status_0, AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); /*TODO: ts->ts_virtcol + test*/ ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, @@ -367,9 +467,6 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); ts->ts_antenna = 1; ts->ts_status = 0; - ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0, - AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - ts->ts_retry[0] = ts->ts_longretry; ts->ts_final_idx = 0; if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { @@ -387,104 +484,81 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, return 0; } -/* - * Proccess a tx status descriptor on 5212 +/** + * ath5k_hw_proc_4word_tx_status() - Process a tx status descriptor on 5212 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @ts: The &struct ath5k_tx_status */ -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) +static int +ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_tx_status *ts) { - struct ath5k_hw_4w_tx_ctl *tx_ctl; struct ath5k_hw_tx_status *tx_status; + u32 txstat0, txstat1; - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; tx_status = &desc->ud.ds_tx5212.tx_stat; + txstat1 = ACCESS_ONCE(tx_status->tx_status_1); + /* No frame has been send or error */ - if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE))) + if (unlikely(!(txstat1 & AR5K_DESC_TX_STATUS1_DONE))) return -EINPROGRESS; + txstat0 = ACCESS_ONCE(tx_status->tx_status_0); + /* * Get descriptor status */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + ts->ts_tstamp = AR5K_REG_MS(txstat0, AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + ts->ts_shortretry = AR5K_REG_MS(txstat0, AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + ts->ts_final_retry = AR5K_REG_MS(txstat0, AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + ts->ts_seqnum = AR5K_REG_MS(txstat1, AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + ts->ts_rssi = AR5K_REG_MS(txstat1, AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = (tx_status->tx_status_1 & + ts->ts_antenna = (txstat1 & AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212) ? 2 : 1; ts->ts_status = 0; - ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1, + ts->ts_final_idx = AR5K_REG_MS(txstat1, AR5K_DESC_TX_STATUS1_FINAL_TS_IX_5212); - /* The longretry counter has the number of un-acked retries - * for the final rate. To get the total number of retries - * we have to add the retry counters for the other rates - * as well - */ - ts->ts_retry[ts->ts_final_idx] = ts->ts_longretry; - switch (ts->ts_final_idx) { - case 3: - ts->ts_rate[3] = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); - - ts->ts_retry[2] = AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); - ts->ts_longretry += ts->ts_retry[2]; - /* fall through */ - case 2: - ts->ts_rate[2] = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); - - ts->ts_retry[1] = AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); - ts->ts_longretry += ts->ts_retry[1]; - /* fall through */ - case 1: - ts->ts_rate[1] = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); - - ts->ts_retry[0] = AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); - ts->ts_longretry += ts->ts_retry[0]; - /* fall through */ - case 0: - ts->ts_rate[0] = tx_ctl->tx_control_3 & - AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - break; - } - /* TX error */ - if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + if (!(txstat0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (txstat0 & AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) ts->ts_status |= AR5K_TXERR_XRETRY; - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + if (txstat0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) ts->ts_status |= AR5K_TXERR_FIFO; - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + if (txstat0 & AR5K_DESC_TX_STATUS0_FILTERED) ts->ts_status |= AR5K_TXERR_FILT; } return 0; } -/* - * RX Descriptors - */ -/* - * Initialize an rx control descriptor +/****************\ +* RX Descriptors * +\****************/ + +/** + * ath5k_hw_setup_rx_desc() - Initialize an rx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @size: RX buffer length in bytes + * @flags: One of AR5K_RXDESC_* flags */ -int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - u32 size, unsigned int flags) +int +ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + u32 size, unsigned int flags) { struct ath5k_hw_rx_ctl *rx_ctl; @@ -511,11 +585,22 @@ int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, return 0; } -/* - * Proccess the rx status descriptor on 5210/5211 +/** + * ath5k_hw_proc_5210_rx_status() - Process the rx status descriptor on 5210/1 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @rs: The &struct ath5k_rx_status + * + * Internal function used to process an RX status descriptor + * on AR5210/5211 MAC. + * + * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e + * frame yet. */ -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) +static int +ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_rx_status *rs) { struct ath5k_hw_rx_status *rx_status; @@ -594,45 +679,55 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, return 0; } -/* - * Proccess the rx status descriptor on 5212 +/** + * ath5k_hw_proc_5212_rx_status() - Process the rx status descriptor on 5212 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @rs: The &struct ath5k_rx_status + * + * Internal function used to process an RX status descriptor + * on AR5212 and later MAC. + * + * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e + * frame yet. */ -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, - struct ath5k_rx_status *rs) +static int +ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_rx_status *rs) { struct ath5k_hw_rx_status *rx_status; + u32 rxstat0, rxstat1; rx_status = &desc->ud.ds_rx.rx_stat; + rxstat1 = ACCESS_ONCE(rx_status->rx_status_1); /* No frame received / not ready */ - if (unlikely(!(rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_DONE))) + if (unlikely(!(rxstat1 & AR5K_5212_RX_DESC_STATUS1_DONE))) return -EINPROGRESS; memset(rs, 0, sizeof(struct ath5k_rx_status)); + rxstat0 = ACCESS_ONCE(rx_status->rx_status_0); /* * Frame receive status */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + rs->rs_datalen = rxstat0 & AR5K_5212_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rxstat0, AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + rs->rs_rate = AR5K_REG_MS(rxstat0, AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + rs->rs_antenna = AR5K_REG_MS(rxstat0, AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA); - rs->rs_more = !!(rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_MORE); - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + rs->rs_more = !!(rxstat0 & AR5K_5212_RX_DESC_STATUS0_MORE); + rs->rs_tstamp = AR5K_REG_MS(rxstat1, AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); /* * Key table status */ - if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rxstat1, AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); else rs->rs_keyix = AR5K_RXKEYIX_INVALID; @@ -640,36 +735,42 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, /* * Receive/descriptor errors */ - if (!(rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) + if (!(rxstat1 & AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) rs->rs_status |= AR5K_RXERR_CRC; - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1, + rs->rs_phyerr = AR5K_REG_MS(rxstat1, AR5K_5212_RX_DESC_STATUS1_PHY_ERROR_CODE); if (!ah->ah_capabilities.cap_has_phyerr_counters) ath5k_ani_phy_error_report(ah, rs->rs_phyerr); } - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) rs->rs_status |= AR5K_RXERR_DECRYPT; - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) rs->rs_status |= AR5K_RXERR_MIC; } return 0; } -/* - * Init function pointers inside ath5k_hw struct + +/********\ +* Attach * +\********/ + +/** + * ath5k_hw_init_desc_functions() - Init function pointers inside ah + * @ah: The &struct ath5k_hw + * + * Maps the internal descriptor functions to the function pointers on ah, used + * from above. This is used as an abstraction layer to handle the various chips + * the same way. */ -int ath5k_hw_init_desc_functions(struct ath5k_hw *ah) +int +ath5k_hw_init_desc_functions(struct ath5k_hw *ah) { if (ah->ah_version == AR5K_AR5212) { ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h index 2509d0bf037..8d6c01a49ea 100644 --- a/drivers/net/wireless/ath/ath5k/desc.h +++ b/drivers/net/wireless/ath/ath5k/desc.h @@ -20,25 +20,30 @@ * RX/TX descriptor structures */ -/* - * Common hardware RX control descriptor +/** + * struct ath5k_hw_rx_ctl - Common hardware RX control descriptor + * @rx_control_0: RX control word 0 + * @rx_control_1: RX control word 1 */ struct ath5k_hw_rx_ctl { - u32 rx_control_0; /* RX control word 0 */ - u32 rx_control_1; /* RX control word 1 */ + u32 rx_control_0; + u32 rx_control_1; } __packed __aligned(4); /* RX control word 1 fields/flags */ #define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff /* data buffer length */ #define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 /* RX interrupt request */ -/* - * Common hardware RX status descriptor +/** + * struct ath5k_hw_rx_status - Common hardware RX status descriptor + * @rx_status_0: RX status word 0 + * @rx_status_1: RX status word 1 + * * 5210, 5211 and 5212 differ only in the fields and flags defined below */ struct ath5k_hw_rx_status { - u32 rx_status_0; /* RX status word 0 */ - u32 rx_status_1; /* RX status word 1 */ + u32 rx_status_0; + u32 rx_status_1; } __packed __aligned(4); /* 5210/5211 */ @@ -58,11 +63,11 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 /* reception success */ #define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 /* CRC error */ #define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN_5210 0x00000008 /* [5210] FIFO overrun */ -#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decyption CRC failure */ +#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decryption CRC failure */ #define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 /* PHY error */ #define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5 #define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 /* key index valid */ -#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decyption key index */ +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decryption key index */ #define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9 #define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 /* 13 bit of TSF */ #define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15 @@ -98,17 +103,36 @@ struct ath5k_hw_rx_status { /** * enum ath5k_phy_error_code - PHY Error codes + * @AR5K_RX_PHY_ERROR_UNDERRUN: Transmit underrun, [5210] No error + * @AR5K_RX_PHY_ERROR_TIMING: Timing error + * @AR5K_RX_PHY_ERROR_PARITY: Illegal parity + * @AR5K_RX_PHY_ERROR_RATE: Illegal rate + * @AR5K_RX_PHY_ERROR_LENGTH: Illegal length + * @AR5K_RX_PHY_ERROR_RADAR: Radar detect, [5210] 64 QAM rate + * @AR5K_RX_PHY_ERROR_SERVICE: Illegal service + * @AR5K_RX_PHY_ERROR_TOR: Transmit override receive + * @AR5K_RX_PHY_ERROR_OFDM_TIMING: OFDM Timing error [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY: OFDM Signal parity error [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL: OFDM Illegal rate [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_LENGTH_ILLEGAL: OFDM Illegal length [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_POWER_DROP: OFDM Power drop [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_SERVICE: OFDM Service (?) [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_RESTART: OFDM Restart (?) [5212+] + * @AR5K_RX_PHY_ERROR_CCK_TIMING: CCK Timing error [5212+] + * @AR5K_RX_PHY_ERROR_CCK_HEADER_CRC: Header CRC error [5212+] + * @AR5K_RX_PHY_ERROR_CCK_RATE_ILLEGAL: Illegal rate [5212+] + * @AR5K_RX_PHY_ERROR_CCK_SERVICE: CCK Service (?) [5212+] + * @AR5K_RX_PHY_ERROR_CCK_RESTART: CCK Restart (?) [5212+] */ enum ath5k_phy_error_code { - AR5K_RX_PHY_ERROR_UNDERRUN = 0, /* Transmit underrun, [5210] No error */ - AR5K_RX_PHY_ERROR_TIMING = 1, /* Timing error */ - AR5K_RX_PHY_ERROR_PARITY = 2, /* Illegal parity */ - AR5K_RX_PHY_ERROR_RATE = 3, /* Illegal rate */ - AR5K_RX_PHY_ERROR_LENGTH = 4, /* Illegal length */ - AR5K_RX_PHY_ERROR_RADAR = 5, /* Radar detect, [5210] 64 QAM rate */ - AR5K_RX_PHY_ERROR_SERVICE = 6, /* Illegal service */ - AR5K_RX_PHY_ERROR_TOR = 7, /* Transmit override receive */ - /* these are specific to the 5212 */ + AR5K_RX_PHY_ERROR_UNDERRUN = 0, + AR5K_RX_PHY_ERROR_TIMING = 1, + AR5K_RX_PHY_ERROR_PARITY = 2, + AR5K_RX_PHY_ERROR_RATE = 3, + AR5K_RX_PHY_ERROR_LENGTH = 4, + AR5K_RX_PHY_ERROR_RADAR = 5, + AR5K_RX_PHY_ERROR_SERVICE = 6, + AR5K_RX_PHY_ERROR_TOR = 7, AR5K_RX_PHY_ERROR_OFDM_TIMING = 17, AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY = 18, AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL = 19, @@ -123,12 +147,14 @@ enum ath5k_phy_error_code { AR5K_RX_PHY_ERROR_CCK_RESTART = 31, }; -/* - * 5210/5211 hardware 2-word TX control descriptor +/** + * struct ath5k_hw_2w_tx_ctl - 5210/5211 hardware 2-word TX control descriptor + * @tx_control_0: TX control word 0 + * @tx_control_1: TX control word 1 */ struct ath5k_hw_2w_tx_ctl { - u32 tx_control_0; /* TX control word 0 */ - u32 tx_control_1; /* TX control word 1 */ + u32 tx_control_0; + u32 tx_control_1; } __packed __aligned(4); /* TX control word 0 fields/flags */ @@ -177,14 +203,18 @@ struct ath5k_hw_2w_tx_ctl { #define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 4 #define AR5K_AR5211_TX_DESC_FRAME_TYPE_PRESP 4 -/* - * 5212 hardware 4-word TX control descriptor +/** + * struct ath5k_hw_4w_tx_ctl - 5212 hardware 4-word TX control descriptor + * @tx_control_0: TX control word 0 + * @tx_control_1: TX control word 1 + * @tx_control_2: TX control word 2 + * @tx_control_3: TX control word 3 */ struct ath5k_hw_4w_tx_ctl { - u32 tx_control_0; /* TX control word 0 */ - u32 tx_control_1; /* TX control word 1 */ - u32 tx_control_2; /* TX control word 2 */ - u32 tx_control_3; /* TX control word 3 */ + u32 tx_control_0; + u32 tx_control_1; + u32 tx_control_2; + u32 tx_control_3; } __packed __aligned(4); /* TX control word 0 fields/flags */ @@ -238,12 +268,14 @@ struct ath5k_hw_4w_tx_ctl { #define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000 /* RTS or CTS rate */ #define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20 -/* - * Common TX status descriptor +/** + * struct ath5k_hw_tx_status - Common TX status descriptor + * @tx_status_0: TX status word 0 + * @tx_status_1: TX status word 1 */ struct ath5k_hw_tx_status { - u32 tx_status_0; /* TX status word 0 */ - u32 tx_status_1; /* TX status word 1 */ + u32 tx_status_0; + u32 tx_status_1; } __packed __aligned(4); /* TX status word 0 fields/flags */ @@ -276,37 +308,47 @@ struct ath5k_hw_tx_status { #define AR5K_DESC_TX_STATUS1_COMP_SUCCESS_5212 0x00800000 /* [5212] compression status */ #define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212 0x01000000 /* [5212] transmit antenna */ -/* - * 5210/5211 hardware TX descriptor +/** + * struct ath5k_hw_5210_tx_desc - 5210/5211 hardware TX descriptor + * @tx_ctl: The &struct ath5k_hw_2w_tx_ctl + * @tx_stat: The &struct ath5k_hw_tx_status */ struct ath5k_hw_5210_tx_desc { struct ath5k_hw_2w_tx_ctl tx_ctl; struct ath5k_hw_tx_status tx_stat; } __packed __aligned(4); -/* - * 5212 hardware TX descriptor +/** + * struct ath5k_hw_5212_tx_desc - 5212 hardware TX descriptor + * @tx_ctl: The &struct ath5k_hw_4w_tx_ctl + * @tx_stat: The &struct ath5k_hw_tx_status */ struct ath5k_hw_5212_tx_desc { struct ath5k_hw_4w_tx_ctl tx_ctl; struct ath5k_hw_tx_status tx_stat; } __packed __aligned(4); -/* - * Common hardware RX descriptor +/** + * struct ath5k_hw_all_rx_desc - Common hardware RX descriptor + * @rx_ctl: The &struct ath5k_hw_rx_ctl + * @rx_stat: The &struct ath5k_hw_rx_status */ struct ath5k_hw_all_rx_desc { struct ath5k_hw_rx_ctl rx_ctl; struct ath5k_hw_rx_status rx_stat; } __packed __aligned(4); -/* - * Atheros hardware DMA descriptor +/** + * struct ath5k_desc - Atheros hardware DMA descriptor + * @ds_link: Physical address of the next descriptor + * @ds_data: Physical address of data buffer (skb) + * @ud: Union containing hw_5xxx_tx_desc structs and hw_all_rx_desc + * * This is read and written to by the hardware */ struct ath5k_desc { - u32 ds_link; /* physical address of the next descriptor */ - u32 ds_data; /* physical address of data buffer (skb) */ + u32 ds_link; + u32 ds_data; union { struct ath5k_hw_5210_tx_desc ds_tx5210; diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c index 923c9ca5c4f..e6c52f7c26e 100644 --- a/drivers/net/wireless/ath/ath5k/dma.c +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -20,44 +20,43 @@ * DMA and interrupt masking functions * \*************************************/ -/* - * dma.c - DMA and interrupt masking functions +/** + * DOC: DMA and interrupt masking functions * * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and * handle queue setup for 5210 chipset (rest are handled on qcu.c). - * Also we setup interrupt mask register (IMR) and read the various iterrupt + * Also we setup interrupt mask register (IMR) and read the various interrupt * status registers (ISR). - * - * TODO: Handle SISR on 5211+ and introduce a function to return the queue - * number that resulted the interrupt. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" + /*********\ * Receive * \*********/ /** - * ath5k_hw_start_rx_dma - Start DMA receive - * + * ath5k_hw_start_rx_dma() - Start DMA receive * @ah: The &struct ath5k_hw */ -void ath5k_hw_start_rx_dma(struct ath5k_hw *ah) +void +ath5k_hw_start_rx_dma(struct ath5k_hw *ah) { ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); ath5k_hw_reg_read(ah, AR5K_CR); } /** - * ath5k_hw_stop_rx_dma - Stop DMA receive - * + * ath5k_hw_stop_rx_dma() - Stop DMA receive * @ah: The &struct ath5k_hw */ -int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +static int +ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) { unsigned int i; @@ -69,32 +68,43 @@ int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) for (i = 1000; i > 0 && (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; i--) - udelay(10); + udelay(100); + + if (!i) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "failed to stop RX DMA !\n"); return i ? 0 : -EBUSY; } /** - * ath5k_hw_get_rxdp - Get RX Descriptor's address - * + * ath5k_hw_get_rxdp() - Get RX Descriptor's address * @ah: The &struct ath5k_hw */ -u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah) +u32 +ath5k_hw_get_rxdp(struct ath5k_hw *ah) { return ath5k_hw_reg_read(ah, AR5K_RXDP); } /** - * ath5k_hw_set_rxdp - Set RX Descriptor's address - * + * ath5k_hw_set_rxdp() - Set RX Descriptor's address * @ah: The &struct ath5k_hw * @phys_addr: RX descriptor address * - * XXX: Should we check if rx is enabled before setting rxdp ? + * Returns -EIO if rx is active */ -void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) +int +ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) { + if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "tried to set RXDP while rx was active !\n"); + return -EIO; + } + ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); + return 0; } @@ -103,8 +113,7 @@ void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) \**********/ /** - * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue - * + * ath5k_hw_start_tx_dma() - Start DMA transmit for a specific queue * @ah: The &struct ath5k_hw * @queue: The hw queue number * @@ -117,7 +126,8 @@ void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) * NOTE: Must be called after setting up tx control descriptor for that * queue (see below). */ -int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) +int +ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) { u32 tx_queue; @@ -125,7 +135,7 @@ int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Return if queue is declared inactive */ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; + return -EINVAL; if (ah->ah_version == AR5K_AR5210) { tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); @@ -166,17 +176,16 @@ int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) } /** - * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue - * + * ath5k_hw_stop_tx_dma() - Stop DMA transmit on a specific queue * @ah: The &struct ath5k_hw * @queue: The hw queue number * * Stop DMA transmit on a specific hw queue and drain queue so we don't * have any pending frames. Returns -EBUSY if we still have pending frames, - * -EINVAL if queue number is out of range. - * + * -EINVAL if queue number is out of range or inactive. */ -int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +static int +ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) { unsigned int i = 40; u32 tx_queue, pending; @@ -185,7 +194,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Return if queue is declared inactive */ if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; + return -EINVAL; if (ah->ah_version == AR5K_AR5210) { tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); @@ -211,12 +220,31 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); ath5k_hw_reg_read(ah, AR5K_CR); } else { + + /* + * Enable DCU early termination to quickly + * flush any pending frames from QCU + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_DCU_EARLY); + /* * Schedule TX disable and wait until queue is empty */ AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); - /*Check for pending frames*/ + /* Wait for queue to stop */ + for (i = 1000; i > 0 && + (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue) != 0); + i--) + udelay(100); + + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "queue %i didn't stop !\n", queue); + + /* Check for pending frames */ + i = 1000; do { pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue)) & @@ -227,7 +255,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* For 2413+ order PCU to drop packets using * QUIET mechanism */ if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) && - pending){ + pending) { /* Set periodicity and duration */ ath5k_hw_reg_write(ah, AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)| @@ -247,12 +275,12 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) AR5K_DIAG_SW_CHANNEL_IDLE_HIGH); /* Wait a while and disable mechanism */ - udelay(200); + udelay(400); AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1, AR5K_QUIET_CTL1_QT_EN); /* Re-check for pending frames */ - i = 40; + i = 100; do { pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue)) & @@ -262,12 +290,27 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211, AR5K_DIAG_SW_CHANNEL_IDLE_HIGH); + + if (pending) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "quiet mechanism didn't work q:%i !\n", + queue); } + /* + * Disable DCU early termination + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_DCU_EARLY); + /* Clear register */ ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); - if (pending) + if (pending) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "tx dma didn't stop (q:%i, frm:%i) !\n", + queue, pending); return -EBUSY; + } } /* TODO: Check for success on 5210 else return error */ @@ -275,8 +318,27 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) } /** - * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue + * ath5k_hw_stop_beacon_queue() - Stop beacon queue + * @ah: The &struct ath5k_hw + * @queue: The queue number * + * Returns -EIO if queue didn't stop + */ +int +ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue) +{ + int ret; + ret = ath5k_hw_stop_tx_dma(ah, queue); + if (ret) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "beacon queue didn't stop !\n"); + return -EIO; + } + return 0; +} + +/** + * ath5k_hw_get_txdp() - Get TX Descriptor's address for a specific queue * @ah: The &struct ath5k_hw * @queue: The hw queue number * @@ -287,7 +349,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) * * XXX: Is TXDP read and clear ? */ -u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) +u32 +ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) { u16 tx_reg; @@ -317,10 +380,10 @@ u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) } /** - * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue - * + * ath5k_hw_set_txdp() - Set TX Descriptor's address for a specific queue * @ah: The &struct ath5k_hw * @queue: The hw queue number + * @phys_addr: The physical address * * Set TX descriptor's address for a specific queue. For 5210 we ignore * the queue number and we use tx queue type since we only have 2 queues @@ -329,7 +392,8 @@ u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still * active. */ -int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +int +ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) { u16 tx_reg; @@ -370,8 +434,7 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) } /** - * ath5k_hw_update_tx_triglevel - Update tx trigger level - * + * ath5k_hw_update_tx_triglevel() - Update tx trigger level * @ah: The &struct ath5k_hw * @increase: Flag to force increase of trigger level * @@ -379,15 +442,15 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) * buffer (aka FIFO threshold) that is used to indicate when PCU flushes * the buffer and transmits its data. Lowering this results sending small * frames more quickly but can lead to tx underruns, raising it a lot can - * result other problems (i think bmiss is related). Right now we start with - * the lowest possible (64Bytes) and if we get tx underrun we increase it using - * the increase flag. Returns -EIO if we have reached maximum/minimum. + * result other problems. Right now we start with the lowest possible + * (64Bytes) and if we get tx underrun we increase it using the increase + * flag. Returns -EIO if we have reached maximum/minimum. * * XXX: Link this with tx DMA size ? - * XXX: Use it to save interrupts ? - * TODO: Needs testing, i think it's related to bmiss... + * XXX2: Use it to save interrupts ? */ -int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) +int +ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) { u32 trigger_level, imr; int ret = -EIO; @@ -427,26 +490,26 @@ done: return ret; } + /*******************\ * Interrupt masking * \*******************/ /** - * ath5k_hw_is_intr_pending - Check if we have pending interrupts - * + * ath5k_hw_is_intr_pending() - Check if we have pending interrupts * @ah: The &struct ath5k_hw * * Check if we have pending interrupts to process. Returns 1 if we * have pending interrupts and 0 if we haven't. */ -bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +bool +ath5k_hw_is_intr_pending(struct ath5k_hw *ah) { return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0; } /** - * ath5k_hw_get_isr - Get interrupt status - * + * ath5k_hw_get_isr() - Get interrupt status * @ah: The @struct ath5k_hw * @interrupt_mask: Driver's interrupt mask used to filter out * interrupts in sw. @@ -457,62 +520,171 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) * being mapped on some standard non hw-specific positions * (check out &ath5k_int). * - * NOTE: We use read-and-clear register, so after this function is called ISR - * is zeroed. + * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this + * function gets called are cleared on return. */ -int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +int +ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) { - u32 data; + u32 data = 0; /* - * Read interrupt status from the Interrupt Status register - * on 5210 + * Read interrupt status from Primary Interrupt + * Register. + * + * Note: PISR/SISR Not available on 5210 */ if (ah->ah_version == AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_ISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; + u32 isr = 0; + isr = ath5k_hw_reg_read(ah, AR5K_ISR); + if (unlikely(isr == AR5K_INT_NOCARD)) { + *interrupt_mask = isr; return -ENODEV; } - } else { + /* - * Read interrupt status from Interrupt - * Status Register shadow copy (Read And Clear) - * - * Note: PISR/SISR Not available on 5210 + * Filter out the non-common bits from the interrupt + * status. + */ + *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr; + + /* Hanlde INT_FATAL */ + if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT + | AR5K_ISR_DPERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successful assoc + some jiffies. + interrupt_mask &= ~AR5K_INT_BMISS; */ - data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; + + data = isr; + } else { + u32 pisr = 0; + u32 pisr_clear = 0; + u32 sisr0 = 0; + u32 sisr1 = 0; + u32 sisr2 = 0; + u32 sisr3 = 0; + u32 sisr4 = 0; + + /* Read PISR and SISRs... */ + pisr = ath5k_hw_reg_read(ah, AR5K_PISR); + if (unlikely(pisr == AR5K_INT_NOCARD)) { + *interrupt_mask = pisr; return -ENODEV; } - } - /* - * Get abstract interrupt mask (driver-compatible) - */ - *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; + sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0); + sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1); + sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2); + sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3); + sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4); - if (ah->ah_version != AR5K_AR5210) { - u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2); + /* + * PISR holds the logical OR of interrupt bits + * from SISR registers: + * + * TXOK and TXDESC -> Logical OR of TXOK and TXDESC + * per-queue bits on SISR0 + * + * TXERR and TXEOL -> Logical OR of TXERR and TXEOL + * per-queue bits on SISR1 + * + * TXURN -> Logical OR of TXURN per-queue bits on SISR2 + * + * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2 + * + * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC + * BCN_TIMEOUT, CAB_TIMEOUT and DTIM + * (and TSFOOR ?) bits on SISR2 + * + * QCBRORN and QCBRURN -> Logical OR of QCBRORN and + * QCBRURN per-queue bits on SISR3 + * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4 + * + * If we clean these bits on PISR we 'll also clear all + * related bits from SISRs, e.g. if we write the TXOK bit on + * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK + * interrupt got fired for another queue while we were reading + * the interrupt registers and we write back the TXOK bit on + * PISR we 'll lose it. So make sure that we don't write back + * on PISR any bits that come from SISRs. Clearing them from + * SISRs will also clear PISR so no need to worry here. + */ - /*HIU = Host Interface Unit (PCI etc)*/ - if (unlikely(data & (AR5K_ISR_HIUERR))) - *interrupt_mask |= AR5K_INT_FATAL; + /* XXX: There seems to be an issue on some cards + * with tx interrupt flags not being updated + * on PISR despite that all Tx interrupt bits + * are cleared on SISRs. Since we handle all + * Tx queues all together it shouldn't be an + * issue if we clear Tx interrupt flags also + * on PISR to avoid that. + */ + pisr_clear = (pisr & ~AR5K_ISR_BITS_FROM_SISRS) | + (pisr & AR5K_INT_TX_ALL); - /*Beacon Not Ready*/ - if (unlikely(data & (AR5K_ISR_BNR))) - *interrupt_mask |= AR5K_INT_BNR; + /* + * Write to clear them... + * Note: This means that each bit we write back + * to the registers will get cleared, leaving the + * rest unaffected. So this won't affect new interrupts + * we didn't catch while reading/processing, we 'll get + * them next time get_isr gets called. + */ + ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0); + ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1); + ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2); + ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3); + ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4); + ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR); + /* Flush previous write */ + ath5k_hw_reg_read(ah, AR5K_PISR); - if (unlikely(sisr2 & (AR5K_SISR2_SSERR | - AR5K_SISR2_DPERR | - AR5K_SISR2_MCABT))) - *interrupt_mask |= AR5K_INT_FATAL; + /* + * Filter out the non-common bits from the interrupt + * status. + */ + *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr; + + + /* We treat TXOK,TXDESC, TXERR and TXEOL + * the same way (schedule the tx tasklet) + * so we track them all together per queue */ + if (pisr & AR5K_ISR_TXOK) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0, + AR5K_SISR0_QCU_TXOK); - if (data & AR5K_ISR_TIM) + if (pisr & AR5K_ISR_TXDESC) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0, + AR5K_SISR0_QCU_TXDESC); + + if (pisr & AR5K_ISR_TXERR) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1, + AR5K_SISR1_QCU_TXERR); + + if (pisr & AR5K_ISR_TXEOL) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1, + AR5K_SISR1_QCU_TXEOL); + + /* Currently this is not much useful since we treat + * all queues the same way if we get a TXURN (update + * tx trigger level) but we might need it later on*/ + if (pisr & AR5K_ISR_TXURN) + ah->ah_txq_isr_txurn |= AR5K_REG_MS(sisr2, + AR5K_SISR2_QCU_TXURN); + + /* Misc Beacon related interrupts */ + + /* For AR5211 */ + if (pisr & AR5K_ISR_TIM) *interrupt_mask |= AR5K_INT_TIM; - if (data & AR5K_ISR_BCNMISC) { + /* For AR5212+ */ + if (pisr & AR5K_ISR_BCNMISC) { if (sisr2 & AR5K_SISR2_TIM) *interrupt_mask |= AR5K_INT_TIM; if (sisr2 & AR5K_SISR2_DTIM) @@ -525,63 +697,39 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) *interrupt_mask |= AR5K_INT_CAB_TIMEOUT; } - if (data & AR5K_ISR_RXDOPPLER) - *interrupt_mask |= AR5K_INT_RX_DOPPLER; - if (data & AR5K_ISR_QCBRORN) { + /* Below interrupts are unlikely to happen */ + + /* HIU = Host Interface Unit (PCI etc) + * Can be one of MCABT, SSERR, DPERR from SISR2 */ + if (unlikely(pisr & (AR5K_ISR_HIUERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (unlikely(pisr & (AR5K_ISR_BNR))) + *interrupt_mask |= AR5K_INT_BNR; + + /* A queue got CBR overrun */ + if (unlikely(pisr & (AR5K_ISR_QCBRORN))) { *interrupt_mask |= AR5K_INT_QCBRORN; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), - AR5K_SISR3_QCBRORN); + ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3, + AR5K_SISR3_QCBRORN); } - if (data & AR5K_ISR_QCBRURN) { + + /* A queue got CBR underrun */ + if (unlikely(pisr & (AR5K_ISR_QCBRURN))) { *interrupt_mask |= AR5K_INT_QCBRURN; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), - AR5K_SISR3_QCBRURN); + ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3, + AR5K_SISR3_QCBRURN); } - if (data & AR5K_ISR_QTRIG) { + + /* A queue got triggered */ + if (unlikely(pisr & (AR5K_ISR_QTRIG))) { *interrupt_mask |= AR5K_INT_QTRIG; - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR4), - AR5K_SISR4_QTRIG); + ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4, + AR5K_SISR4_QTRIG); } - if (data & AR5K_ISR_TXOK) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), - AR5K_SISR0_QCU_TXOK); - - if (data & AR5K_ISR_TXDESC) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), - AR5K_SISR0_QCU_TXDESC); - - if (data & AR5K_ISR_TXERR) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), - AR5K_SISR1_QCU_TXERR); - - if (data & AR5K_ISR_TXEOL) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), - AR5K_SISR1_QCU_TXEOL); - - if (data & AR5K_ISR_TXURN) - ah->ah_txq_isr |= AR5K_REG_MS( - ath5k_hw_reg_read(ah, AR5K_RAC_SISR2), - AR5K_SISR2_QCU_TXURN); - } else { - if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT - | AR5K_ISR_HIUERR | AR5K_ISR_DPERR))) - *interrupt_mask |= AR5K_INT_FATAL; - - /* - * XXX: BMISS interrupts may occur after association. - * I found this on 5210 code but it needs testing. If this is - * true we should disable them before assoc and re-enable them - * after a successful assoc + some jiffies. - interrupt_mask &= ~AR5K_INT_BMISS; - */ + data = pisr; } /* @@ -595,8 +743,7 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) } /** - * ath5k_hw_set_imr - Set interrupt mask - * + * ath5k_hw_set_imr() - Set interrupt mask * @ah: The &struct ath5k_hw * @new_mask: The new interrupt mask to be set * @@ -604,7 +751,8 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) * ath5k_int bits to hw-specific bits to remove abstraction and writing * Interrupt Mask Register. */ -enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) +enum ath5k_int +ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) { enum ath5k_int old_mask, int_mask; @@ -631,16 +779,14 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2) & AR5K_SIMR2_QCU_TXURN; + /* Fatal interrupt abstraction for 5211+ */ if (new_mask & AR5K_INT_FATAL) { int_mask |= AR5K_IMR_HIUERR; simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); } - /*Beacon Not Ready*/ - if (new_mask & AR5K_INT_BNR) - int_mask |= AR5K_INT_BNR; - + /* Misc beacon related interrupts */ if (new_mask & AR5K_INT_TIM) int_mask |= AR5K_IMR_TIM; @@ -655,19 +801,22 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) if (new_mask & AR5K_INT_CAB_TIMEOUT) simr2 |= AR5K_SISR2_CAB_TIMEOUT; - if (new_mask & AR5K_INT_RX_DOPPLER) - int_mask |= AR5K_IMR_RXDOPPLER; + /*Beacon Not Ready*/ + if (new_mask & AR5K_INT_BNR) + int_mask |= AR5K_INT_BNR; /* Note: Per queue interrupt masks - * are set via reset_tx_queue (qcu.c) */ + * are set via ath5k_hw_reset_tx_queue() (qcu.c) */ ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); } else { + /* Fatal interrupt abstraction for 5210 */ if (new_mask & AR5K_INT_FATAL) int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT | AR5K_IMR_HIUERR | AR5K_IMR_DPERR); + /* Only common interrupts left for 5210 (no SIMRs) */ ath5k_hw_reg_write(ah, int_mask, AR5K_IMR); } @@ -688,3 +837,92 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) return old_mask; } + +/********************\ + Init/Stop functions +\********************/ + +/** + * ath5k_hw_dma_init() - Initialize DMA unit + * @ah: The &struct ath5k_hw + * + * Set DMA size and pre-enable interrupts + * (driver handles tx/rx buffer setup and + * dma start/stop) + * + * XXX: Save/restore RXDP/TXDP registers ? + */ +void +ath5k_hw_dma_init(struct ath5k_hw *ah) +{ + /* + * Set Rx/Tx DMA Configuration + * + * Set standard DMA size (128). Note that + * a DMA size of 512 causes rx overruns and tx errors + * on pci-e cards (tested on 5424 but since rx overruns + * also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * XXX: need to check 5210 for this + * TODO: Check out tx trigger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) + */ + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B); + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_imr(ah, ah->ah_imr); + +} + +/** + * ath5k_hw_dma_stop() - stop DMA unit + * @ah: The &struct ath5k_hw + * + * Stop tx/rx DMA and interrupts. Returns + * -EBUSY if tx or rx dma failed to stop. + * + * XXX: Sometimes DMA unit hangs and we have + * stuck frames on tx queues, only a reset + * can fix that. + */ +int +ath5k_hw_dma_stop(struct ath5k_hw *ah) +{ + int i, qmax, err; + err = 0; + + /* Disable interrupts */ + ath5k_hw_set_imr(ah, 0); + + /* Stop rx dma */ + err = ath5k_hw_stop_rx_dma(ah); + if (err) + return err; + + /* Clear any pending interrupts + * and disable tx dma */ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); + qmax = AR5K_NUM_TX_QUEUES; + } else { + /* PISR/SISR Not available on 5210 */ + ath5k_hw_reg_read(ah, AR5K_ISR); + qmax = AR5K_NUM_TX_QUEUES_NOQCU; + } + + for (i = 0; i < qmax; i++) { + err = ath5k_hw_stop_tx_dma(ah, i); + /* -EINVAL -> queue inactive */ + if (err && err != -EINVAL) + return err; + } + + return 0; +} diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 39722dd73e4..94d34ee0226 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -21,52 +21,24 @@ * EEPROM access functions and helpers * \*************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/slab.h> #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" -/* - * Read from eeprom - */ -static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) -{ - u32 status, timeout; - /* - * Initialize EEPROM access - */ - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); - (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); - } else { - ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_READ); - } - - for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { - status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); - if (status & AR5K_EEPROM_STAT_RDDONE) { - if (status & AR5K_EEPROM_STAT_RDERR) - return -EIO; - *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & - 0xffff); - return 0; - } - udelay(15); - } - - return -ETIMEDOUT; -} +/******************\ +* Helper functions * +\******************/ /* * Translate binary channel representation in EEPROM to frequency */ static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, - unsigned int mode) + unsigned int mode) { u16 val; @@ -89,6 +61,11 @@ static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, return val; } + +/*********\ +* Parsers * +\*********/ + /* * Initialize eeprom & capabilities structs */ @@ -96,7 +73,6 @@ static int ath5k_eeprom_init_header(struct ath5k_hw *ah) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - int ret; u16 val; u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX; @@ -130,7 +106,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) * big still, waiting on a better value. */ if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) { - ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: " + ATH5K_ERR(ah, "Invalid max custom EEPROM size: " "%d (0x%04x) max expected: %d (0x%04x)\n", eep_max, eep_max, 3 * AR5K_EEPROM_INFO_MAX, @@ -144,7 +120,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) cksum ^= val; } if (cksum != AR5K_EEPROM_INFO_CKSUM) { - ATH5K_ERR(ah->ah_sc, "Invalid EEPROM " + ATH5K_ERR(ah, "Invalid EEPROM " "checksum: 0x%04x eep_max: 0x%04x (%s)\n", cksum, eep_max, eep_max == AR5K_EEPROM_INFO_MAX ? @@ -198,7 +174,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) * * XXX: Serdes values seem to be fixed so * no need to read them here, we write them - * during ath5k_hw_attach */ + * during ath5k_hw_init */ AR5K_EEPROM_READ(AR5K_EEPROM_PCIE_OFFSET, val); ee->ee_serdes = (val == AR5K_EEPROM_PCIE_SERDES_SECTION) ? true : false; @@ -216,7 +192,7 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 o = *offset; u16 val; - int ret, i = 0; + int i = 0; AR5K_EEPROM_READ(o++, val); ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; @@ -248,14 +224,14 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, ah->ah_ant_ctl[mode][AR5K_ANT_CTL] = (ee->ee_ant_control[mode][0] << 4); ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] = - ee->ee_ant_control[mode][1] | - (ee->ee_ant_control[mode][2] << 6) | + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | (ee->ee_ant_control[mode][3] << 12) | (ee->ee_ant_control[mode][4] << 18) | (ee->ee_ant_control[mode][5] << 24); ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] = - ee->ee_ant_control[mode][6] | - (ee->ee_ant_control[mode][7] << 6) | + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | (ee->ee_ant_control[mode][8] << 12) | (ee->ee_ant_control[mode][9] << 18) | (ee->ee_ant_control[mode][10] << 24); @@ -276,12 +252,11 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 o = *offset; u16 val; - int ret; ee->ee_n_piers[mode] = 0; AR5K_EEPROM_READ(o++, val); ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11A: ee->ee_ob[mode][3] = (val >> 5) & 0x7; ee->ee_db[mode][3] = (val >> 2) & 0x7; @@ -375,7 +350,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, /* Note: >= v5 have bg freq piers on another location * so these freq piers are ignored for >= v5 (should be 0xff * anyway) */ - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11A: if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1) break; @@ -448,7 +423,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, if (ee->ee_version < AR5K_EEPROM_VERSION_5_0) goto done; - switch (mode){ + switch (mode) { case AR5K_EEPROM_MODE_11A: ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f; @@ -462,7 +437,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7; ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff; - if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >=2) + if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >= 2) ee->ee_pd_gain_overlap = (val >> 9) & 0xf; break; case AR5K_EEPROM_MODE_11G: @@ -539,11 +514,10 @@ ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, int o = *offset; int i = 0; u8 freq1, freq2; - int ret; u16 val; ee->ee_n_piers[mode] = 0; - while(i < max) { + while (i < max) { AR5K_EEPROM_READ(o++, val); freq1 = val & 0xff; @@ -575,7 +549,7 @@ ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a; - int i, ret; + int i; u16 val; u8 mask; @@ -629,7 +603,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; struct ath5k_chan_pcal_info *pcal; - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11B: pcal = ee->ee_pwr_cal_b; break; @@ -647,6 +621,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) return 0; } + /* * Read power calibration for RF5111 chips * @@ -660,7 +635,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) /* Used to match PCDAC steps with power values on RF5111 chips * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC * steps that match with the power values we read from eeprom. On - * older eeprom versions (< 3.2) these steps are equaly spaced at + * older eeprom versions (< 3.2) these steps are equally spaced at * 10% of the pcdac curve -until the curve reaches its maximum- * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) * these 11 steps are spaced in a different way. This function returns @@ -670,10 +645,12 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) static inline void ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) { - static const u16 intercepts3[] = - { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; - static const u16 intercepts3_2[] = - { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; + static const u16 intercepts3[] = { + 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 + }; + static const u16 intercepts3_2[] = { + 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 + }; const u16 *ip; int i; @@ -686,6 +663,51 @@ ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100; } +static int +ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *chinfo; + u8 pier, pdg; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + if (!chinfo[pier].pd_curves) + continue; + + for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) { + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[pdg]; + + kfree(pd->pd_step); + kfree(pd->pd_pwr); + } + + kfree(chinfo[pier].pd_curves); + } + + return 0; +} + /* Convert RF5111 specific data to generic raw data * used by interpolation code */ static int @@ -710,7 +732,7 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, GFP_KERNEL); if (!chinfo[pier].pd_curves) - return -ENOMEM; + goto err_out; /* Only one curve for RF5111 * find out which one and place @@ -734,16 +756,16 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, sizeof(u8), GFP_KERNEL); if (!pd->pd_step) - return -ENOMEM; + goto err_out; pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, sizeof(s16), GFP_KERNEL); if (!pd->pd_pwr) - return -ENOMEM; + goto err_out; /* Fill raw dataset * (convert power to 0.25dB units - * for RF5112 combatibility) */ + * for RF5112 compatibility) */ for (point = 0; point < pd->pd_points; point++) { /* Absolute values */ @@ -760,6 +782,10 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, } return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; } /* Parse EEPROM data */ @@ -773,7 +799,7 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) u16 val; offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11A: if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) return 0; @@ -859,7 +885,7 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) * Read power calibration for RF5112 chips * * For RF5112 we have 4 XPD -eXternal Power Detector- curves - * for each calibrated channel on 0, -6, -12 and -18dbm but we only + * for each calibrated channel on 0, -6, -12 and -18dBm but we only * use the higher (3) and the lower (0) curves. Each curve has 0.5dB * power steps on x axis and PCDAC steps on y axis and looks like a * linear function. To recreate the curve and pass the power values @@ -893,7 +919,7 @@ ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, GFP_KERNEL); if (!chinfo[pier].pd_curves) - return -ENOMEM; + goto err_out; /* Fill pd_curves */ for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { @@ -912,14 +938,13 @@ ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, sizeof(u8), GFP_KERNEL); if (!pd->pd_step) - return -ENOMEM; + goto err_out; pd->pd_pwr = kcalloc(pd->pd_points, sizeof(s16), GFP_KERNEL); if (!pd->pd_pwr) - return -ENOMEM; - + goto err_out; /* Fill raw dataset * (all power levels are in 0.25dB units) */ @@ -951,13 +976,13 @@ ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, sizeof(u8), GFP_KERNEL); if (!pd->pd_step) - return -ENOMEM; + goto err_out; pd->pd_pwr = kcalloc(pd->pd_points, sizeof(s16), GFP_KERNEL); if (!pd->pd_pwr) - return -ENOMEM; + goto err_out; /* Fill raw dataset * (all power levels are in 0.25dB units) */ @@ -980,6 +1005,10 @@ ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, } return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; } /* Parse EEPROM data */ @@ -993,7 +1022,6 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) u32 offset; u8 i, c; u16 val; - int ret; u8 pd_gains = 0; /* Count how many curves we have and @@ -1107,7 +1135,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) * * To recreate the curves we read here the points and interpolate * later. Note that in most cases only 2 (higher and lower) curves are - * used (like RF5112) but vendors have the oportunity to include all + * used (like RF5112) but vendors have the opportunity to include all * 4 curves on eeprom. The final curve (higher power) has an extra * point for better accuracy like RF5112. */ @@ -1138,7 +1166,7 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) { u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4); - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11G: if (AR5K_EEPROM_HDR_11B(ee->ee_header)) offset += ath5k_pdgains_size_2413(ee, @@ -1183,7 +1211,7 @@ ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, GFP_KERNEL); if (!chinfo[pier].pd_curves) - return -ENOMEM; + goto err_out; /* Fill pd_curves */ for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { @@ -1204,17 +1232,17 @@ ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, sizeof(u8), GFP_KERNEL); if (!pd->pd_step) - return -ENOMEM; + goto err_out; pd->pd_pwr = kcalloc(pd->pd_points, sizeof(s16), GFP_KERNEL); if (!pd->pd_pwr) - return -ENOMEM; + goto err_out; /* Fill raw dataset * convert all pwr levels to - * quarter dB for RF5112 combatibility */ + * quarter dB for RF5112 compatibility */ pd->pd_step[0] = pcinfo->pddac_i[pdg]; pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg]; @@ -1240,6 +1268,10 @@ ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, } return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; } /* Parse EEPROM data */ @@ -1251,7 +1283,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) struct ath5k_chan_pcal_info *chinfo; u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; u32 offset; - int idx, i, ret; + int idx, i; u16 val; u8 pd_gains = 0; @@ -1329,7 +1361,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) /* * Pd gain 0 is not the last pd gain * so it only has 2 pd points. - * Continue wih pd gain 1. + * Continue with pd gain 1. */ pcinfo->pwr_i[1] = (val >> 10) & 0x1f; @@ -1442,7 +1474,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) u8 *rate_target_pwr_num; u32 offset; u16 val; - int ret, i; + int i; offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1); rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode]; @@ -1450,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) case AR5K_EEPROM_MODE_11A: offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); rate_pcal_info = ee->ee_rate_tpwr_a; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; break; case AR5K_EEPROM_MODE_11B: offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); @@ -1514,6 +1546,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) return 0; } + /* * Read per channel calibration info from EEPROM * @@ -1560,62 +1593,6 @@ ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) return 0; } -static int -ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_chan_pcal_info *chinfo; - u8 pier, pdg; - - switch (mode) { - case AR5K_EEPROM_MODE_11A: - if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) - return 0; - chinfo = ee->ee_pwr_cal_a; - break; - case AR5K_EEPROM_MODE_11B: - if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) - return 0; - chinfo = ee->ee_pwr_cal_b; - break; - case AR5K_EEPROM_MODE_11G: - if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) - return 0; - chinfo = ee->ee_pwr_cal_g; - break; - default: - return -EINVAL; - } - - for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { - if (!chinfo[pier].pd_curves) - continue; - - for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { - struct ath5k_pdgain_info *pd = - &chinfo[pier].pd_curves[pdg]; - - if (pd != NULL) { - kfree(pd->pd_step); - kfree(pd->pd_pwr); - } - } - - kfree(chinfo[pier].pd_curves); - } - - return 0; -} - -void -ath5k_eeprom_detach(struct ath5k_hw *ah) -{ - u8 mode; - - for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) - ath5k_eeprom_free_pcal_info(ah, mode); -} - /* Read conformance test limits used for regulatory control */ static int ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) @@ -1624,7 +1601,7 @@ ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) struct ath5k_edge_power *rep; unsigned int fmask, pmask; unsigned int ctl_mode; - int ret, i, j; + int i, j; u32 offset; u16 val; @@ -1646,8 +1623,8 @@ ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) offset += AR5K_EEPROM_GROUPS_START(ee->ee_version); rep = ee->ee_ctl_pwr; - for(i = 0; i < ee->ee_ctls; i++) { - switch(ee->ee_ctl[i] & AR5K_CTL_MODE_M) { + for (i = 0; i < ee->ee_ctls; i++) { + switch (ee->ee_ctl[i] & AR5K_CTL_MODE_M) { case AR5K_CTL_11A: case AR5K_CTL_TURBO: ctl_mode = AR5K_EEPROM_MODE_11A; @@ -1756,6 +1733,11 @@ ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah) return ret; } + +/***********************\ +* Init/Detach functions * +\***********************/ + /* * Initialize eeprom data structure */ @@ -1787,35 +1769,28 @@ ath5k_eeprom_init(struct ath5k_hw *ah) return 0; } -/* - * Read the MAC address from eeprom - */ -int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +void +ath5k_eeprom_detach(struct ath5k_hw *ah) { - u8 mac_d[ETH_ALEN] = {}; - u32 total, offset; - u16 data; - int octet, ret; - - ret = ath5k_hw_eeprom_read(ah, 0x20, &data); - if (ret) - return ret; + u8 mode; - for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { - ret = ath5k_hw_eeprom_read(ah, offset, &data); - if (ret) - return ret; + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) + ath5k_eeprom_free_pcal_info(ah, mode); +} - total += data; - mac_d[octet + 1] = data & 0xff; - mac_d[octet] = data >> 8; - octet += 2; +int +ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + switch (channel->hw_value) { + case AR5K_MODE_11A: + return AR5K_EEPROM_MODE_11A; + case AR5K_MODE_11G: + return AR5K_EEPROM_MODE_11G; + case AR5K_MODE_11B: + return AR5K_EEPROM_MODE_11B; + default: + ATH5K_WARN(ah, "channel is not A/B/G!"); + return AR5K_EEPROM_MODE_11A; } - - if (!total || total == 3 * 0xffff) - return -EINVAL; - - memcpy(mac, mac_d, ETH_ALEN); - - return 0; } diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index c4a6d5f26af..693296ee969 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -50,7 +50,7 @@ #define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ #define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (ar5211_rfregs) */ #define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ #define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ #define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ @@ -75,11 +75,11 @@ #define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) #define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) #define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz */ +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz */ #define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for < 2W power consumption */ #define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) /* Device type (1 Cardbus, 2 PCI, 3 MiniPCI, 4 AP) */ #define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */ +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz */ /* Newer EEPROMs are using a different offset */ #define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ @@ -120,7 +120,7 @@ #define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) /* disable fast frames */ #define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) /* disable bursting */ #define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) /* max number of QCUs. defaults to 10 */ -#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heayy clipping */ +#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heavy clipping */ #define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) /* key cache size. defaults to 128 */ #define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) @@ -182,6 +182,7 @@ #define AR5K_EEPROM_EEP_DELTA 10 #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 @@ -223,7 +224,7 @@ #define AR5K_EEPROM_CCK_OFDM_DELTA 15 #define AR5K_EEPROM_N_IQ_CAL 2 /* 5GHz/2GHz */ -enum ath5k_eeprom_freq_bands{ +enum ath5k_eeprom_freq_bands { AR5K_EEPROM_BAND_5GHZ = 0, AR5K_EEPROM_BAND_2GHZ = 1, AR5K_EEPROM_N_FREQ_BANDS, @@ -241,9 +242,8 @@ enum ath5k_eeprom_freq_bands{ #define AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz 6250 #define AR5K_EEPROM_READ(_o, _v) do { \ - ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \ - if (ret) \ - return ret; \ + if (!ath5k_hw_nvram_read(ah, (_o), &(_v))) \ + return -EIO; \ } while (0) #define AR5K_EEPROM_READ_HDR(_o, _v) \ @@ -269,32 +269,9 @@ enum ath5k_ctl_mode { AR5K_CTL_MODE_M = 15, }; -/* Default CTL ids for the 3 main reg domains. - * Atheros only uses these by default but vendors - * can have up to 32 different CTLs for different - * scenarios. Note that theese values are ORed with - * the mode id (above) so we can have up to 24 CTL - * datasets out of these 3 main regdomains. That leaves - * 8 ids that can be used by vendors and since 0x20 is - * missing from HAL sources i guess this is the set of - * custom CTLs vendors can use. */ -#define AR5K_CTL_FCC 0x10 -#define AR5K_CTL_CUSTOM 0x20 -#define AR5K_CTL_ETSI 0x30 -#define AR5K_CTL_MKK 0x40 - -/* Indicates a CTL with only mode set and - * no reg domain mapping, such CTLs are used - * for world roaming domains or simply when - * a reg domain is not set */ -#define AR5K_CTL_NO_REGDOMAIN 0xf0 - -/* Indicates an empty (invalid) CTL */ -#define AR5K_CTL_NO_CTL 0xff - /* Per channel calibration data, used for power table setup */ struct ath5k_chan_pcal_info_rf5111 { - /* Power levels in half dbm units + /* Power levels in half dBm units * for one power curve. */ u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; /* PCDAC table steps @@ -516,4 +493,3 @@ struct ath5k_eeprom_info { /* Antenna raw switch tables */ u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; }; - diff --git a/drivers/net/wireless/ath/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c index bc90503f4b7..73d3dd8a306 100644 --- a/drivers/net/wireless/ath/ath5k/gpio.c +++ b/drivers/net/wireless/ath/ath5k/gpio.c @@ -23,12 +23,34 @@ #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" -/* - * Set led state + +/** + * DOC: GPIO/LED functions + * + * Here we control the 6 bidirectional GPIO pins provided by the hw. + * We can set a GPIO pin to be an input or an output pin on GPIO control + * register and then read or set its status from GPIO data input/output + * registers. + * + * We also control the two LED pins provided by the hw, LED_0 is our + * "power" LED and LED_1 is our "network activity" LED but many scenarios + * are available from hw. Vendors might also provide LEDs connected to the + * GPIO pins, we handle them through the LED subsystem on led.c + */ + + +/** + * ath5k_hw_set_ledstate() - Set led state + * @ah: The &struct ath5k_hw + * @state: One of AR5K_LED_* + * + * Used to set the LED blinking state. This only + * works for the LED connected to the LED_0, LED_1 pins, + * not the GPIO based. */ -void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) +void +ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) { u32 led; /*5210 has different led mode handling*/ @@ -75,10 +97,13 @@ void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); } -/* - * Set GPIO inputs +/** + * ath5k_hw_set_gpio_input() - Set GPIO inputs + * @ah: The &struct ath5k_hw + * @gpio: GPIO pin to set as input */ -int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +int +ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) { if (gpio >= AR5K_NUM_GPIO) return -EINVAL; @@ -90,10 +115,13 @@ int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) return 0; } -/* - * Set GPIO outputs +/** + * ath5k_hw_set_gpio_output() - Set GPIO outputs + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to set as output */ -int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +int +ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) { if (gpio >= AR5K_NUM_GPIO) return -EINVAL; @@ -105,10 +133,13 @@ int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) return 0; } -/* - * Get GPIO state +/** + * ath5k_hw_get_gpio() - Get GPIO state + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to read */ -u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +u32 +ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) { if (gpio >= AR5K_NUM_GPIO) return 0xffffffff; @@ -118,10 +149,14 @@ u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) 0x1; } -/* - * Set GPIO state +/** + * ath5k_hw_set_gpio() - Set GPIO state + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to set + * @val: Value to set (boolean) */ -int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +int +ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) { u32 data; @@ -139,10 +174,19 @@ int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) return 0; } -/* - * Initialize the GPIO interrupt (RFKill switch) +/** + * ath5k_hw_set_gpio_intr() - Initialize the GPIO interrupt (RFKill switch) + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to use + * @interrupt_level: True to generate interrupt on active pin (high) + * + * This function is used to set up the GPIO interrupt for the hw RFKill switch. + * That switch is connected to a GPIO pin and it's number is stored on EEPROM. + * It can either open or close the circuit to indicate that we should disable + * RF/Wireless to save power (we also get that from EEPROM). */ -void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, +void +ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level) { u32 data; diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c index 8fa43930882..ee1c2fa8b59 100644 --- a/drivers/net/wireless/ath/ath5k/initvals.c +++ b/drivers/net/wireless/ath/ath5k/initvals.c @@ -19,32 +19,36 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" -/* - * Mode-independent initial register writes +/** + * struct ath5k_ini - Mode-independent initial register writes + * @ini_register: Register address + * @ini_value: Default value + * @ini_mode: 0 to write 1 to read (and clear) */ - struct ath5k_ini { u16 ini_register; u32 ini_value; enum { AR5K_INI_WRITE = 0, /* Default */ - AR5K_INI_READ = 1, /* Cleared on read */ + AR5K_INI_READ = 1, } ini_mode; }; -/* - * Mode specific initial register values +/** + * struct ath5k_ini_mode - Mode specific initial register values + * @mode_register: Register address + * @mode_value: Set of values for each enum ath5k_driver_mode */ - struct ath5k_ini_mode { u16 mode_register; - u32 mode_value[5]; + u32 mode_value[3]; }; /* Initial register settings for AR5210 */ @@ -113,8 +117,8 @@ static const struct ath5k_ini ar5210_ini[] = { { AR5K_PHY(28), 0x0000000f }, { AR5K_PHY(29), 0x00000080 }, { AR5K_PHY(30), 0x00000004 }, - { AR5K_PHY(31), 0x00000018 }, /* 0x987c */ - { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */ + { AR5K_PHY(31), 0x00000018 }, /* 0x987c */ + { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */ { AR5K_PHY(65), 0x00000000 }, { AR5K_PHY(66), 0x00000000 }, { AR5K_PHY(67), 0x00800000 }, @@ -387,83 +391,80 @@ static const struct ath5k_ini ar5211_ini[] = { /* Initial mode-specific settings for AR5211 * 5211 supports OFDM-only g (draft g) but we - * need to test it ! - */ + * need to test it ! */ static const struct ath5k_ini_mode ar5211_ini_mode[] = { { AR5K_TXCFG, - /* a aTurbo b g (OFDM) */ - { 0x00000015, 0x00000015, 0x0000001d, 0x00000015 } }, + /* A B G */ + { 0x00000015, 0x0000001d, 0x00000015 } }, { AR5K_QUEUE_DFS_LOCAL_IFS(0), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(1), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(2), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(3), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(4), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(5), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(6), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(7), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(8), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(9), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_DCU_GBL_IFS_SLOT, - { 0x00000168, 0x000001e0, 0x000001b8, 0x00000168 } }, + { 0x00000168, 0x000001b8, 0x00000168 } }, { AR5K_DCU_GBL_IFS_SIFS, - { 0x00000230, 0x000001e0, 0x000000b0, 0x00000230 } }, + { 0x00000230, 0x000000b0, 0x00000230 } }, { AR5K_DCU_GBL_IFS_EIFS, - { 0x00000d98, 0x00001180, 0x00001f48, 0x00000d98 } }, + { 0x00000d98, 0x00001f48, 0x00000d98 } }, { AR5K_DCU_GBL_IFS_MISC, - { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000a0e0 } }, + { 0x0000a0e0, 0x00005880, 0x0000a0e0 } }, { AR5K_TIME_OUT, - { 0x04000400, 0x08000800, 0x20003000, 0x04000400 } }, + { 0x04000400, 0x20003000, 0x04000400 } }, { AR5K_USEC_5211, - { 0x0e8d8fa7, 0x0e8d8fcf, 0x01608f95, 0x0e8d8fa7 } }, - { AR5K_PHY_TURBO, - { 0x00000000, 0x00000003, 0x00000000, 0x00000000 } }, + { 0x0e8d8fa7, 0x01608f95, 0x0e8d8fa7 } }, { AR5K_PHY(8), - { 0x02020200, 0x02020200, 0x02010200, 0x02020200 } }, - { AR5K_PHY(9), - { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e } }, - { AR5K_PHY(10), - { 0x0a020001, 0x0a020001, 0x05010000, 0x0a020001 } }, - { AR5K_PHY(13), - { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, - { AR5K_PHY(14), - { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b } }, - { AR5K_PHY(17), - { 0x1372169c, 0x137216a5, 0x137216a8, 0x1372169c } }, - { AR5K_PHY(18), - { 0x0018ba67, 0x0018ba67, 0x0018ba69, 0x0018ba69 } }, - { AR5K_PHY(20), - { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } }, + { 0x02020200, 0x02010200, 0x02020200 } }, + { AR5K_PHY_RF_CTL2, + { 0x00000e0e, 0x00000707, 0x00000e0e } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x05010000, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000007, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_SETTLING, + { 0x1372169c, 0x137216a8, 0x1372169c } }, + { AR5K_PHY_GAIN, + { 0x0018ba67, 0x0018ba69, 0x0018ba69 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } }, { AR5K_PHY_SIG, - { 0x7e800d2e, 0x7e800d2e, 0x7ec00d2e, 0x7e800d2e } }, + { 0x7e800d2e, 0x7ec00d2e, 0x7e800d2e } }, { AR5K_PHY_AGCCOARSE, - { 0x31375d5e, 0x31375d5e, 0x313a5d5e, 0x31375d5e } }, + { 0x31375d5e, 0x313a5d5e, 0x31375d5e } }, { AR5K_PHY_AGCCTL, - { 0x0000bd10, 0x0000bd10, 0x0000bd38, 0x0000bd10 } }, + { 0x0000bd10, 0x0000bd38, 0x0000bd10 } }, { AR5K_PHY_NF, - { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, + { 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, { AR5K_PHY_RX_DELAY, - { 0x00002710, 0x00002710, 0x0000157c, 0x00002710 } }, + { 0x00002710, 0x0000157c, 0x00002710 } }, { AR5K_PHY(70), - { 0x00000190, 0x00000190, 0x00000084, 0x00000190 } }, + { 0x00000190, 0x00000084, 0x00000190 } }, { AR5K_PHY_FRAME_CTL_5211, - { 0x6fe01020, 0x6fe01020, 0x6fe00920, 0x6fe01020 } }, + { 0x6fe01020, 0x6fe00920, 0x6fe01020 } }, { AR5K_PHY_PCDAC_TXPOWER_BASE, - { 0x05ff14ff, 0x05ff14ff, 0x05ff14ff, 0x05ff19ff } }, + { 0x05ff14ff, 0x05ff14ff, 0x05ff19ff } }, { AR5K_RF_BUFFER_CONTROL_4, - { 0x00000010, 0x00000014, 0x00000010, 0x00000010 } }, + { 0x00000010, 0x00000010, 0x00000010 } }, }; -/* Initial register settings for AR5212 */ +/* Initial register settings for AR5212 and newer chips */ static const struct ath5k_ini ar5212_ini_common_start[] = { { AR5K_RXDP, 0x00000000 }, { AR5K_RXCFG, 0x00000005 }, @@ -551,7 +552,7 @@ static const struct ath5k_ini ar5212_ini_common_start[] = { { AR5K_DIAG_SW_5211, 0x00000000 }, { AR5K_ADDAC_TEST, 0x00000000 }, { AR5K_DEFAULT_ANTENNA, 0x00000000 }, - { AR5K_FRAME_CTL_QOSM, 0x000fc78f }, + { AR5K_FRAME_CTL_QOSM, 0x000fc78f }, { AR5K_XRMODE, 0x2a82301a }, { AR5K_XRDELAY, 0x05dc01e0 }, { AR5K_XRTIMEOUT, 0x1f402710 }, @@ -677,96 +678,96 @@ static const struct ath5k_ini ar5212_ini_common_start[] = { /* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */ static const struct ath5k_ini_mode ar5212_ini_mode_start[] = { { AR5K_QUEUE_DFS_LOCAL_IFS(0), - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + /* A/XR B G */ + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(1), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(2), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(3), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(4), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(5), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(6), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(7), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(8), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_QUEUE_DFS_LOCAL_IFS(9), - { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, { AR5K_DCU_GBL_IFS_SIFS, - { 0x00000230, 0x000001e0, 0x000000b0, 0x00000160, 0x000001e0 } }, + { 0x00000230, 0x000000b0, 0x00000160 } }, { AR5K_DCU_GBL_IFS_SLOT, - { 0x00000168, 0x000001e0, 0x000001b8, 0x0000018c, 0x000001e0 } }, + { 0x00000168, 0x000001b8, 0x0000018c } }, { AR5K_DCU_GBL_IFS_EIFS, - { 0x00000e60, 0x00001180, 0x00001f1c, 0x00003e38, 0x00001180 } }, + { 0x00000e60, 0x00001f1c, 0x00003e38 } }, { AR5K_DCU_GBL_IFS_MISC, - { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000b0e0, 0x00014068 } }, + { 0x0000a0e0, 0x00005880, 0x0000b0e0 } }, { AR5K_TIME_OUT, - { 0x03e803e8, 0x06e006e0, 0x04200420, 0x08400840, 0x06e006e0 } }, - { AR5K_PHY_TURBO, - { 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000003 } }, + { 0x03e803e8, 0x04200420, 0x08400840 } }, { AR5K_PHY(8), - { 0x02020200, 0x02020200, 0x02010200, 0x02020200, 0x02020200 } }, + { 0x02020200, 0x02010200, 0x02020200 } }, { AR5K_PHY_RF_CTL2, - { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e, 0x00000e0e } }, + { 0x00000e0e, 0x00000707, 0x00000e0e } }, { AR5K_PHY_SETTLING, - { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } }, + { 0x1372161c, 0x13721722, 0x137216a2 } }, { AR5K_PHY_AGCCTL, - { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d10 } }, + { 0x00009d10, 0x00009d18, 0x00009d18 } }, { AR5K_PHY_NF, - { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, + { 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, { AR5K_PHY_WEAK_OFDM_HIGH_THR, - { 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 } }, + { 0x409a4190, 0x409a4190, 0x409a4190 } }, { AR5K_PHY(70), - { 0x000001b8, 0x000001b8, 0x00000084, 0x00000108, 0x000001b8 } }, + { 0x000001b8, 0x00000084, 0x00000108 } }, { AR5K_PHY_OFDM_SELFCORR, - { 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05 } }, + { 0x10058a05, 0x10058a05, 0x10058a05 } }, { 0xa230, - { 0x00000000, 0x00000000, 0x00000000, 0x00000108, 0x00000000 } }, + { 0x00000000, 0x00000000, 0x00000108 } }, }; -/* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */ +/* Initial mode-specific settings for AR5212 + RF5111 + * (Written after ar5212_ini) */ static const struct ath5k_ini_mode rf5111_ini_mode_end[] = { { AR5K_TXCFG, - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } }, + /* A/XR B G */ + { 0x00008015, 0x00008015, 0x00008015 } }, { AR5K_USEC_5211, - { 0x128d8fa7, 0x09880fcf, 0x04e00f95, 0x12e00fab, 0x09880fcf } }, + { 0x128d8fa7, 0x04e00f95, 0x12e00fab } }, { AR5K_PHY_RF_CTL3, - { 0x0a020001, 0x0a020001, 0x05010100, 0x0a020001, 0x0a020001 } }, + { 0x0a020001, 0x05010100, 0x0a020001 } }, { AR5K_PHY_RF_CTL4, - { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, { AR5K_PHY_PA_CTL, - { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { 0x00000007, 0x0000000b, 0x0000000b } }, { AR5K_PHY_GAIN, - { 0x0018da5a, 0x0018da5a, 0x0018ca69, 0x0018ca69, 0x0018ca69 } }, + { 0x0018da5a, 0x0018ca69, 0x0018ca69 } }, { AR5K_PHY_DESIRED_SIZE, - { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, { AR5K_PHY_SIG, - { 0x7e800d2e, 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e, 0x7e800d2e } }, + { 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e } }, { AR5K_PHY_AGCCOARSE, - { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137615e } }, + { 0x3137665e, 0x3137665e, 0x3137665e } }, { AR5K_PHY_WEAK_OFDM_LOW_THR, - { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb080, 0x050cb080 } }, + { 0x050cb081, 0x050cb081, 0x050cb080 } }, { AR5K_PHY_RX_DELAY, - { 0x00002710, 0x00002710, 0x0000157c, 0x00002af8, 0x00002710 } }, + { 0x00002710, 0x0000157c, 0x00002af8 } }, { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81020, 0xf7b81020, 0xf7b80d20, 0xf7b81020, 0xf7b81020 } }, + { 0xf7b81020, 0xf7b80d20, 0xf7b81020 } }, { AR5K_PHY_GAIN_2GHZ, - { 0x642c416a, 0x642c416a, 0x6440416a, 0x6440416a, 0x6440416a } }, + { 0x642c416a, 0x6440416a, 0x6440416a } }, { AR5K_PHY_CCK_RX_CTL_4, - { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } }, + { 0x1883800a, 0x1873800a, 0x1883800a } }, }; +/* Common for all modes */ static const struct ath5k_ini rf5111_ini_common_end[] = { { AR5K_DCU_FP, 0x00000000 }, - { AR5K_PHY_AGC, 0x00000000 }, - { AR5K_PHY_ADC_CTL, 0x00022ffe }, - { 0x983c, 0x00020100 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY_ADC_CTL, 0x00022ffe }, + { 0x983c, 0x00020100 }, { AR5K_PHY_GAIN_OFFSET, 0x1284613c }, { AR5K_PHY_PAPD_PROBE, 0x00004883 }, { 0x9940, 0x00000004 }, @@ -779,41 +780,43 @@ static const struct ath5k_ini rf5111_ini_common_end[] = { { 0xa23c, 0x13c889af }, }; -/* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */ + +/* Initial mode-specific settings for AR5212 + RF5112 + * (Written after ar5212_ini) */ static const struct ath5k_ini_mode rf5112_ini_mode_end[] = { { AR5K_TXCFG, - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } }, + /* A/XR B G */ + { 0x00008015, 0x00008015, 0x00008015 } }, { AR5K_USEC_5211, - { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { 0x128d93a7, 0x04e01395, 0x12e013ab } }, { AR5K_PHY_RF_CTL3, - { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, + { 0x0a020001, 0x05020100, 0x0a020001 } }, { AR5K_PHY_RF_CTL4, - { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, { AR5K_PHY_PA_CTL, - { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { 0x00000007, 0x0000000b, 0x0000000b } }, { AR5K_PHY_GAIN, - { 0x0018da6d, 0x0018da6d, 0x0018ca75, 0x0018ca75, 0x0018ca75 } }, + { 0x0018da6d, 0x0018ca75, 0x0018ca75 } }, { AR5K_PHY_DESIRED_SIZE, - { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, { AR5K_PHY_SIG, - { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7e800d2e } }, + { 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e } }, { AR5K_PHY_AGCCOARSE, - { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } }, + { 0x3137665e, 0x3137665e, 0x3137665e } }, { AR5K_PHY_WEAK_OFDM_LOW_THR, - { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { 0x050cb081, 0x050cb081, 0x050cb081 } }, { AR5K_PHY_RX_DELAY, - { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { 0x000007d0, 0x0000044c, 0x00000898 } }, { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81020, 0xf7b81020, 0xf7b80d10, 0xf7b81010, 0xf7b81010 } }, + { 0xf7b81020, 0xf7b80d10, 0xf7b81010 } }, { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000, 0x00000008, 0x00000008, 0x00000008 } }, + { 0x00000000, 0x00000008, 0x00000008 } }, { AR5K_PHY_CCK_CROSSCORR, - { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xd6be6788, 0xd03e6788, 0xd03e6788 } }, { AR5K_PHY_GAIN_2GHZ, - { 0x642c0140, 0x642c0140, 0x6442c160, 0x6442c160, 0x6442c160 } }, + { 0x642c0140, 0x6442c160, 0x6442c160 } }, { AR5K_PHY_CCK_RX_CTL_4, - { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } }, + { 0x1883800a, 0x1873800a, 0x1883800a } }, }; static const struct ath5k_ini rf5112_ini_common_end[] = { @@ -830,69 +833,71 @@ static const struct ath5k_ini rf5112_ini_common_end[] = { { 0xa23c, 0x13c889af }, }; -/* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */ + +/* Initial mode-specific settings for RF5413/5414 + * (Written after ar5212_ini) */ static const struct ath5k_ini_mode rf5413_ini_mode_end[] = { { AR5K_TXCFG, - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } }, + /* A/XR B G */ + { 0x00000015, 0x00000015, 0x00000015 } }, { AR5K_USEC_5211, - { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { 0x128d93a7, 0x04e01395, 0x12e013ab } }, { AR5K_PHY_RF_CTL3, - { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, + { 0x0a020001, 0x05020100, 0x0a020001 } }, { AR5K_PHY_RF_CTL4, - { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, { AR5K_PHY_PA_CTL, - { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { 0x00000007, 0x0000000b, 0x0000000b } }, { AR5K_PHY_GAIN, - { 0x0018fa61, 0x0018fa61, 0x001a1a63, 0x001a1a63, 0x001a1a63 } }, + { 0x0018fa61, 0x001a1a63, 0x001a1a63 } }, { AR5K_PHY_DESIRED_SIZE, - { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } }, + { 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da } }, { AR5K_PHY_SIG, - { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, + { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, { AR5K_PHY_AGCCOARSE, - { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } }, + { 0x3139605e, 0x3139605e, 0x3139605e } }, { AR5K_PHY_WEAK_OFDM_LOW_THR, - { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { 0x050cb081, 0x050cb081, 0x050cb081 } }, { AR5K_PHY_RX_DELAY, - { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { 0x000007d0, 0x0000044c, 0x00000898 } }, { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, + { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } }, { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x00000000, 0x00000000, 0x00000000 } }, { AR5K_PHY_CCK_CROSSCORR, - { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xd6be6788, 0xd03e6788, 0xd03e6788 } }, { AR5K_PHY_GAIN_2GHZ, - { 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 } }, + { 0x002ec1e0, 0x002ac120, 0x002ac120 } }, { AR5K_PHY_CCK_RX_CTL_4, - { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } }, + { 0x1883800a, 0x1863800a, 0x1883800a } }, { 0xa300, - { 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 } }, + { 0x18010000, 0x18010000, 0x18010000 } }, { 0xa304, - { 0x30032602, 0x30032602, 0x30032602, 0x30032602, 0x30032602 } }, + { 0x30032602, 0x30032602, 0x30032602 } }, { 0xa308, - { 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06 } }, + { 0x48073e06, 0x48073e06, 0x48073e06 } }, { 0xa30c, - { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } }, + { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } }, { 0xa310, - { 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f } }, + { 0x641a600f, 0x641a600f, 0x641a600f } }, { 0xa314, - { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } }, + { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } }, { 0xa318, - { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } }, + { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } }, { 0xa31c, - { 0x90cf865b, 0x90cf865b, 0x8ecf865b, 0x8ecf865b, 0x8ecf865b } }, + { 0x90cf865b, 0x8ecf865b, 0x8ecf865b } }, { 0xa320, - { 0x9d4f970f, 0x9d4f970f, 0x9b4f970f, 0x9b4f970f, 0x9b4f970f } }, + { 0x9d4f970f, 0x9b4f970f, 0x9b4f970f } }, { 0xa324, - { 0xa7cfa38f, 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f, 0xa3cf9f8f } }, + { 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f } }, { 0xa328, - { 0xb55faf1f, 0xb55faf1f, 0xb35faf1f, 0xb35faf1f, 0xb35faf1f } }, + { 0xb55faf1f, 0xb35faf1f, 0xb35faf1f } }, { 0xa32c, - { 0xbddfb99f, 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f, 0xbbdfb99f } }, + { 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f } }, { 0xa330, - { 0xcb7fc53f, 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f, 0xcb7fc73f } }, + { 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f } }, { 0xa334, - { 0xd5ffd1bf, 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } }, + { 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } }, }; static const struct ath5k_ini rf5413_ini_common_end[] = { @@ -968,42 +973,43 @@ static const struct ath5k_ini rf5413_ini_common_end[] = { { 0xa384, 0xf3307ff0 }, }; -/* Initial mode-specific settings for RF2413/2414 (Written after ar5212_ini) */ +/* Initial mode-specific settings for RF2413/2414 + * (Written after ar5212_ini) */ /* XXX: a mode ? */ static const struct ath5k_ini_mode rf2413_ini_mode_end[] = { { AR5K_TXCFG, - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } }, + /* A/XR B G */ + { 0x00000015, 0x00000015, 0x00000015 } }, { AR5K_USEC_5211, - { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { 0x128d93a7, 0x04e01395, 0x12e013ab } }, { AR5K_PHY_RF_CTL3, - { 0x0a020001, 0x0a020001, 0x05020000, 0x0a020001, 0x0a020001 } }, + { 0x0a020001, 0x05020000, 0x0a020001 } }, { AR5K_PHY_RF_CTL4, - { 0x00000e00, 0x00000e00, 0x00000e00, 0x00000e00, 0x00000e00 } }, + { 0x00000e00, 0x00000e00, 0x00000e00 } }, { AR5K_PHY_PA_CTL, - { 0x00000002, 0x00000002, 0x0000000a, 0x0000000a, 0x0000000a } }, + { 0x00000002, 0x0000000a, 0x0000000a } }, { AR5K_PHY_GAIN, - { 0x0018da6d, 0x0018da6d, 0x001a6a64, 0x001a6a64, 0x001a6a64 } }, + { 0x0018da6d, 0x001a6a64, 0x001a6a64 } }, { AR5K_PHY_DESIRED_SIZE, - { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b0da, 0x0c98b0da, 0x0de8b0da } }, + { 0x0de8b4e0, 0x0de8b0da, 0x0c98b0da } }, { AR5K_PHY_SIG, - { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ec80d2e, 0x7e800d2e } }, + { 0x7e800d2e, 0x7ee80d2e, 0x7ec80d2e } }, { AR5K_PHY_AGCCOARSE, - { 0x3137665e, 0x3137665e, 0x3137665e, 0x3139605e, 0x3137665e } }, + { 0x3137665e, 0x3137665e, 0x3139605e } }, { AR5K_PHY_WEAK_OFDM_LOW_THR, - { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { 0x050cb081, 0x050cb081, 0x050cb081 } }, { AR5K_PHY_RX_DELAY, - { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { 0x000007d0, 0x0000044c, 0x00000898 } }, { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, + { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } }, { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x00000000, 0x00000000, 0x00000000 } }, { AR5K_PHY_CCK_CROSSCORR, - { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xd6be6788, 0xd03e6788, 0xd03e6788 } }, { AR5K_PHY_GAIN_2GHZ, - { 0x002c0140, 0x002c0140, 0x0042c140, 0x0042c140, 0x0042c140 } }, + { 0x002c0140, 0x0042c140, 0x0042c140 } }, { AR5K_PHY_CCK_RX_CTL_4, - { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } }, + { 0x1883800a, 0x1863800a, 0x1883800a } }, }; static const struct ath5k_ini rf2413_ini_common_end[] = { @@ -1090,56 +1096,55 @@ static const struct ath5k_ini rf2413_ini_common_end[] = { { 0xa384, 0xf3307ff0 }, }; -/* Initial mode-specific settings for RF2425 (Written after ar5212_ini) */ +/* Initial mode-specific settings for RF2425 + * (Written after ar5212_ini) */ /* XXX: a mode ? */ static const struct ath5k_ini_mode rf2425_ini_mode_end[] = { { AR5K_TXCFG, - /* a/XR aTurbo b g (DYN) gTurbo */ - { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } }, + /* A/XR B G */ + { 0x00000015, 0x00000015, 0x00000015 } }, { AR5K_USEC_5211, - { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, - { AR5K_PHY_TURBO, - { 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000001 } }, + { 0x128d93a7, 0x04e01395, 0x12e013ab } }, { AR5K_PHY_RF_CTL3, - { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, + { 0x0a020001, 0x05020100, 0x0a020001 } }, { AR5K_PHY_RF_CTL4, - { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, { AR5K_PHY_PA_CTL, - { 0x00000003, 0x00000003, 0x0000000b, 0x0000000b, 0x0000000b } }, + { 0x00000003, 0x0000000b, 0x0000000b } }, { AR5K_PHY_SETTLING, - { 0x1372161c, 0x13721c25, 0x13721722, 0x13721422, 0x13721c25 } }, + { 0x1372161c, 0x13721722, 0x13721422 } }, { AR5K_PHY_GAIN, - { 0x0018fa61, 0x0018fa61, 0x00199a65, 0x00199a65, 0x00199a65 } }, + { 0x0018fa61, 0x00199a65, 0x00199a65 } }, { AR5K_PHY_DESIRED_SIZE, - { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } }, + { 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da } }, { AR5K_PHY_SIG, - { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, + { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, { AR5K_PHY_AGCCOARSE, - { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } }, + { 0x3139605e, 0x3139605e, 0x3139605e } }, { AR5K_PHY_WEAK_OFDM_LOW_THR, - { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { 0x050cb081, 0x050cb081, 0x050cb081 } }, { AR5K_PHY_RX_DELAY, - { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { 0x000007d0, 0x0000044c, 0x00000898 } }, { AR5K_PHY_FRAME_CTL_5211, - { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, + { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } }, { AR5K_PHY_CCKTXCTL, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x00000000, 0x00000000, 0x00000000 } }, { AR5K_PHY_CCK_CROSSCORR, - { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xd6be6788, 0xd03e6788, 0xd03e6788 } }, { AR5K_PHY_GAIN_2GHZ, - { 0x00000140, 0x00000140, 0x0052c140, 0x0052c140, 0x0052c140 } }, + { 0x00000140, 0x0052c140, 0x0052c140 } }, { AR5K_PHY_CCK_RX_CTL_4, - { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } }, + { 0x1883800a, 0x1863800a, 0x1883800a } }, { 0xa324, - { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, { 0xa328, - { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, { 0xa32c, - { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, { 0xa330, - { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, { 0xa334, - { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, }; static const struct ath5k_ini rf2425_ini_common_end[] = { @@ -1364,19 +1369,24 @@ static const struct ath5k_ini rf5112_ini_bbgain[] = { }; -/* - * Write initial register dump +/** + * ath5k_hw_ini_registers() - Write initial register dump common for all modes + * @ah: The &struct ath5k_hw + * @size: Dump size + * @ini_regs: The array of &struct ath5k_ini + * @skip_pcu: Skip PCU registers */ -static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, - const struct ath5k_ini *ini_regs, bool change_channel) +static void +ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, + const struct ath5k_ini *ini_regs, bool skip_pcu) { unsigned int i; /* Write initial registers */ for (i = 0; i < size; i++) { - /* On channel change there is - * no need to mess with PCU */ - if (change_channel && + /* Skip PCU registers if + * requested */ + if (skip_pcu && ini_regs[i].ini_register >= AR5K_PCU_MIN && ini_regs[i].ini_register <= AR5K_PCU_MAX) continue; @@ -1395,7 +1405,15 @@ static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, } } -static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, +/** + * ath5k_hw_ini_mode_registers() - Write initial mode-specific register dump + * @ah: The &struct ath5k_hw + * @size: Dump size + * @ini_mode: The array of &struct ath5k_ini_mode + * @mode: One of enum ath5k_driver_mode + */ +static void +ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, unsigned int size, const struct ath5k_ini_mode *ini_mode, u8 mode) { @@ -1409,13 +1427,23 @@ static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, } -int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) +/** + * ath5k_hw_write_initvals() - Write initial chip-specific register dump + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_driver_mode + * @skip_pcu: Skip PCU registers + * + * Write initial chip-specific register dump, to get the chipset on a + * clean and ready-to-work state after warm reset. + */ +int +ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu) { /* * Write initial register settings */ - /* For AR5212 and combatible */ + /* For AR5212 and compatible */ if (ah->ah_version == AR5K_AR5212) { /* First set of mode-specific settings */ @@ -1427,7 +1455,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) * Write initial settings common for all modes */ ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini_common_start), - ar5212_ini_common_start, change_channel); + ar5212_ini_common_start, skip_pcu); /* Second set of mode-specific settings */ switch (ah->ah_radio) { @@ -1439,12 +1467,12 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_common_end), - rf5111_ini_common_end, change_channel); + rf5111_ini_common_end, skip_pcu); /* Baseband gain table */ ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain), - rf5111_ini_bbgain, change_channel); + rf5111_ini_bbgain, skip_pcu); break; case AR5K_RF5112: @@ -1455,11 +1483,11 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5112_ini_common_end), - rf5112_ini_common_end, change_channel); + rf5112_ini_common_end, skip_pcu); ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5112_ini_bbgain), - rf5112_ini_bbgain, change_channel); + rf5112_ini_bbgain, skip_pcu); break; case AR5K_RF5413: @@ -1470,11 +1498,11 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5413_ini_common_end), - rf5413_ini_common_end, change_channel); + rf5413_ini_common_end, skip_pcu); ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5112_ini_bbgain), - rf5112_ini_bbgain, change_channel); + rf5112_ini_bbgain, skip_pcu); break; case AR5K_RF2316: @@ -1486,7 +1514,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf2413_ini_common_end), - rf2413_ini_common_end, change_channel); + rf2413_ini_common_end, skip_pcu); /* Override settings from rf2413_ini_common_end */ if (ah->ah_radio == AR5K_RF2316) { @@ -1498,9 +1526,32 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5112_ini_bbgain), - rf5112_ini_bbgain, change_channel); + rf5112_ini_bbgain, skip_pcu); break; case AR5K_RF2317: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf2413_ini_mode_end), + rf2413_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf2425_ini_common_end), + rf2425_ini_common_end, skip_pcu); + + /* Override settings from rf2413_ini_mode_end */ + ath5k_hw_reg_write(ah, 0x00180a65, AR5K_PHY_GAIN); + + /* Override settings from rf2413_ini_common_end */ + ath5k_hw_reg_write(ah, 0x00004000, AR5K_PHY_AGC); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TPC_RG5, + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP, 0xa); + ath5k_hw_reg_write(ah, 0x800000a8, 0x8140); + ath5k_hw_reg_write(ah, 0x000000ff, 0x9958); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, skip_pcu); + break; case AR5K_RF2425: ath5k_hw_ini_mode_registers(ah, @@ -1509,11 +1560,11 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf2425_ini_common_end), - rf2425_ini_common_end, change_channel); + rf2425_ini_common_end, skip_pcu); ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5112_ini_bbgain), - rf5112_ini_bbgain, change_channel); + rf5112_ini_bbgain, skip_pcu); break; default: return -EINVAL; @@ -1525,8 +1576,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) /* AR5K_MODE_11B */ if (mode > 2) { - ATH5K_ERR(ah->ah_sc, - "unsupported channel mode: %d\n", mode); + ATH5K_ERR(ah, "unsupported channel mode: %d\n", mode); return -EINVAL; } @@ -1538,17 +1588,17 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) * Write initial settings common for all modes */ ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini), - ar5211_ini, change_channel); + ar5211_ini, skip_pcu); /* AR5211 only comes with 5111 */ /* Baseband gain table */ ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain), - rf5111_ini_bbgain, change_channel); + rf5111_ini_bbgain, skip_pcu); /* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */ } else if (ah->ah_version == AR5K_AR5210) { ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini), - ar5210_ini, change_channel); + ar5210_ini, skip_pcu); } return 0; diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index 67aa52e9bf9..f77ef36acf8 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -39,20 +39,21 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/pci.h> #include "ath5k.h" -#include "base.h" -#define ATH_SDEVICE(subv,subd) \ +#define ATH_SDEVICE(subv, subd) \ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \ .subvendor = (subv), .subdevice = (subd) -#define ATH_LED(pin,polarity) .driver_data = (((pin) << 8) | (polarity)) +#define ATH_LED(pin, polarity) .driver_data = (((pin) << 8) | (polarity)) #define ATH_PIN(data) ((data) >> 8) #define ATH_POLARITY(data) ((data) & 0xff) /* Devices we match on for LED config info (typically laptops) */ -static const struct pci_device_id ath5k_led_devices[] = { +static DEFINE_PCI_DEVICE_TABLE(ath5k_led_devices) = { /* AR5211 */ { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) }, /* HP Compaq nc6xx, nc4000, nx6000 */ @@ -86,26 +87,26 @@ static const struct pci_device_id ath5k_led_devices[] = { { } }; -void ath5k_led_enable(struct ath5k_softc *sc) +void ath5k_led_enable(struct ath5k_hw *ah) { - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(sc->ah, sc->led_pin); - ath5k_led_off(sc); + if (test_bit(ATH_STAT_LEDSOFT, ah->status)) { + ath5k_hw_set_gpio_output(ah, ah->led_pin); + ath5k_led_off(ah); } } -static void ath5k_led_on(struct ath5k_softc *sc) +static void ath5k_led_on(struct ath5k_hw *ah) { - if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + if (!test_bit(ATH_STAT_LEDSOFT, ah->status)) return; - ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on); + ath5k_hw_set_gpio(ah, ah->led_pin, ah->led_on); } -void ath5k_led_off(struct ath5k_softc *sc) +void ath5k_led_off(struct ath5k_hw *ah) { - if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + if (!test_bit(ATH_STAT_LEDSOFT, ah->status)) return; - ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); + ath5k_hw_set_gpio(ah, ah->led_pin, !ah->led_on); } static void @@ -116,27 +117,27 @@ ath5k_led_brightness_set(struct led_classdev *led_dev, led_dev); if (brightness == LED_OFF) - ath5k_led_off(led->sc); + ath5k_led_off(led->ah); else - ath5k_led_on(led->sc); + ath5k_led_on(led->ah); } static int -ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led, +ath5k_register_led(struct ath5k_hw *ah, struct ath5k_led *led, const char *name, char *trigger) { int err; - led->sc = sc; + led->ah = ah; strncpy(led->name, name, sizeof(led->name)); led->led_dev.name = led->name; led->led_dev.default_trigger = trigger; led->led_dev.brightness_set = ath5k_led_brightness_set; - err = led_classdev_register(&sc->pdev->dev, &led->led_dev); + err = led_classdev_register(ah->dev, &led->led_dev); if (err) { - ATH5K_WARN(sc, "could not register LED %s\n", name); - led->sc = NULL; + ATH5K_WARN(ah, "could not register LED %s\n", name); + led->ah = NULL; } return err; } @@ -144,47 +145,56 @@ ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led, static void ath5k_unregister_led(struct ath5k_led *led) { - if (!led->sc) + if (!led->ah) return; led_classdev_unregister(&led->led_dev); - ath5k_led_off(led->sc); - led->sc = NULL; + ath5k_led_off(led->ah); + led->ah = NULL; } -void ath5k_unregister_leds(struct ath5k_softc *sc) +void ath5k_unregister_leds(struct ath5k_hw *ah) { - ath5k_unregister_led(&sc->rx_led); - ath5k_unregister_led(&sc->tx_led); + ath5k_unregister_led(&ah->rx_led); + ath5k_unregister_led(&ah->tx_led); } -int ath5k_init_leds(struct ath5k_softc *sc) +int ath5k_init_leds(struct ath5k_hw *ah) { int ret = 0; - struct ieee80211_hw *hw = sc->hw; - struct pci_dev *pdev = sc->pdev; + struct ieee80211_hw *hw = ah->hw; +#ifndef CONFIG_ATHEROS_AR231X + struct pci_dev *pdev = ah->pdev; +#endif char name[ATH5K_LED_MAX_NAME_LEN + 1]; const struct pci_device_id *match; + if (!ah->pdev) + return 0; + +#ifdef CONFIG_ATHEROS_AR231X + match = NULL; +#else match = pci_match_id(&ath5k_led_devices[0], pdev); +#endif if (match) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = ATH_PIN(match->driver_data); - sc->led_on = ATH_POLARITY(match->driver_data); + __set_bit(ATH_STAT_LEDSOFT, ah->status); + ah->led_pin = ATH_PIN(match->driver_data); + ah->led_on = ATH_POLARITY(match->driver_data); } - if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + if (!test_bit(ATH_STAT_LEDSOFT, ah->status)) goto out; - ath5k_led_enable(sc); + ath5k_led_enable(ah); snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy)); - ret = ath5k_register_led(sc, &sc->rx_led, name, + ret = ath5k_register_led(ah, &ah->rx_led, name, ieee80211_get_rx_led_name(hw)); if (ret) goto out; snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy)); - ret = ath5k_register_led(sc, &sc->tx_led, name, + ret = ath5k_register_led(ah, &ah->tx_led, name, ieee80211_get_tx_led_name(hw)); out: return ret; diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c new file mode 100644 index 00000000000..afb23b3cc7b --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -0,0 +1,830 @@ +/*- + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2010 Bruno Randolf <br1@einfach.org> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <net/mac80211.h> +#include <asm/unaligned.h> + +#include "ath5k.h" +#include "base.h" +#include "reg.h" + +/********************\ +* Mac80211 functions * +\********************/ + +static void +ath5k_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct ath5k_hw *ah = hw->priv; + u16 qnum = skb_get_queue_mapping(skb); + + if (WARN_ON(qnum >= ah->ah_capabilities.cap_queues.q_tx_num)) { + ieee80211_free_txskb(hw, skb); + return; + } + + ath5k_tx_queue(hw, skb, &ah->txqs[qnum], control); +} + + +static int +ath5k_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + int ret; + struct ath5k_vif *avf = (void *)vif->drv_priv; + + mutex_lock(&ah->lock); + + if ((vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_ADHOC) + && (ah->num_ap_vifs + ah->num_adhoc_vifs) >= ATH_BCBUF) { + ret = -ELNRNG; + goto end; + } + + /* Don't allow other interfaces if one ad-hoc is configured. + * TODO: Fix the problems with ad-hoc and multiple other interfaces. + * We would need to operate the HW in ad-hoc mode to allow TSF updates + * for the IBSS, but this breaks with additional AP or STA interfaces + * at the moment. */ + if (ah->num_adhoc_vifs || + (ah->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) { + ATH5K_ERR(ah, "Only one single ad-hoc interface is allowed.\n"); + ret = -ELNRNG; + goto end; + } + + switch (vif->type) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + avf->opmode = vif->type; + break; + default: + ret = -EOPNOTSUPP; + goto end; + } + + ah->nvifs++; + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode); + + /* Assign the vap/adhoc to a beacon xmit slot. */ + if ((avf->opmode == NL80211_IFTYPE_AP) || + (avf->opmode == NL80211_IFTYPE_ADHOC) || + (avf->opmode == NL80211_IFTYPE_MESH_POINT)) { + int slot; + + WARN_ON(list_empty(&ah->bcbuf)); + avf->bbuf = list_first_entry(&ah->bcbuf, struct ath5k_buf, + list); + list_del(&avf->bbuf->list); + + avf->bslot = 0; + for (slot = 0; slot < ATH_BCBUF; slot++) { + if (!ah->bslot[slot]) { + avf->bslot = slot; + break; + } + } + BUG_ON(ah->bslot[avf->bslot] != NULL); + ah->bslot[avf->bslot] = vif; + if (avf->opmode == NL80211_IFTYPE_AP) + ah->num_ap_vifs++; + else if (avf->opmode == NL80211_IFTYPE_ADHOC) + ah->num_adhoc_vifs++; + else if (avf->opmode == NL80211_IFTYPE_MESH_POINT) + ah->num_mesh_vifs++; + } + + /* Any MAC address is fine, all others are included through the + * filter. + */ + ath5k_hw_set_lladdr(ah, vif->addr); + + ath5k_update_bssid_mask_and_opmode(ah, vif); + ret = 0; +end: + mutex_unlock(&ah->lock); + return ret; +} + + +static void +ath5k_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + struct ath5k_vif *avf = (void *)vif->drv_priv; + unsigned int i; + + mutex_lock(&ah->lock); + ah->nvifs--; + + if (avf->bbuf) { + ath5k_txbuf_free_skb(ah, avf->bbuf); + list_add_tail(&avf->bbuf->list, &ah->bcbuf); + for (i = 0; i < ATH_BCBUF; i++) { + if (ah->bslot[i] == vif) { + ah->bslot[i] = NULL; + break; + } + } + avf->bbuf = NULL; + } + if (avf->opmode == NL80211_IFTYPE_AP) + ah->num_ap_vifs--; + else if (avf->opmode == NL80211_IFTYPE_ADHOC) + ah->num_adhoc_vifs--; + else if (avf->opmode == NL80211_IFTYPE_MESH_POINT) + ah->num_mesh_vifs--; + + ath5k_update_bssid_mask_and_opmode(ah, NULL); + mutex_unlock(&ah->lock); +} + + +/* + * TODO: Phy disable/diversity etc + */ +static int +ath5k_config(struct ieee80211_hw *hw, u32 changed) +{ + struct ath5k_hw *ah = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + int ret = 0; + int i; + + mutex_lock(&ah->lock); + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + ret = ath5k_chan_set(ah, &conf->chandef); + if (ret < 0) + goto unlock; + } + + if ((changed & IEEE80211_CONF_CHANGE_POWER) && + (ah->ah_txpower.txp_requested != conf->power_level)) { + ah->ah_txpower.txp_requested = conf->power_level; + + /* Half dB steps */ + ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); + } + + if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { + ah->ah_retry_long = conf->long_frame_max_tx_count; + ah->ah_retry_short = conf->short_frame_max_tx_count; + + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) + ath5k_hw_set_tx_retry_limits(ah, i); + } + + /* TODO: + * 1) Move this on config_interface and handle each case + * separately eg. when we have only one STA vif, use + * AR5K_ANTMODE_SINGLE_AP + * + * 2) Allow the user to change antenna mode eg. when only + * one antenna is present + * + * 3) Allow the user to set default/tx antenna when possible + * + * 4) Default mode should handle 90% of the cases, together + * with fixed a/b and single AP modes we should be able to + * handle 99%. Sectored modes are extreme cases and i still + * haven't found a usage for them. If we decide to support them, + * then we must allow the user to set how many tx antennas we + * have available + */ + ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); + +unlock: + mutex_unlock(&ah->lock); + return ret; +} + + +static void +ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, u32 changes) +{ + struct ath5k_vif *avf = (void *)vif->drv_priv; + struct ath5k_hw *ah = hw->priv; + struct ath_common *common = ath5k_hw_common(ah); + + mutex_lock(&ah->lock); + + if (changes & BSS_CHANGED_BSSID) { + /* Cache for later use during resets */ + memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); + common->curaid = 0; + ath5k_hw_set_bssid(ah); + mmiowb(); + } + + if (changes & BSS_CHANGED_BEACON_INT) + ah->bintval = bss_conf->beacon_int; + + if (changes & BSS_CHANGED_ERP_SLOT) { + int slot_time; + + ah->ah_short_slot = bss_conf->use_short_slot; + slot_time = ath5k_hw_get_default_slottime(ah) + + 3 * ah->ah_coverage_class; + ath5k_hw_set_ifs_intervals(ah, slot_time); + } + + if (changes & BSS_CHANGED_ASSOC) { + avf->assoc = bss_conf->assoc; + if (bss_conf->assoc) + ah->assoc = bss_conf->assoc; + else + ah->assoc = ath5k_any_vif_assoc(ah); + + if (ah->opmode == NL80211_IFTYPE_STATION) + ath5k_set_beacon_filter(hw, ah->assoc); + ath5k_hw_set_ledstate(ah, ah->assoc ? + AR5K_LED_ASSOC : AR5K_LED_INIT); + if (bss_conf->assoc) { + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, + "Bss Info ASSOC %d, bssid: %pM\n", + bss_conf->aid, common->curbssid); + common->curaid = bss_conf->aid; + ath5k_hw_set_bssid(ah); + /* Once ANI is available you would start it here */ + } + } + + if (changes & BSS_CHANGED_BEACON) { + spin_lock_bh(&ah->block); + ath5k_beacon_update(hw, vif); + spin_unlock_bh(&ah->block); + } + + if (changes & BSS_CHANGED_BEACON_ENABLED) + ah->enable_beacon = bss_conf->enable_beacon; + + if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED | + BSS_CHANGED_BEACON_INT)) + ath5k_beacon_config(ah); + + mutex_unlock(&ah->lock); +} + + +static u64 +ath5k_prepare_multicast(struct ieee80211_hw *hw, + struct netdev_hw_addr_list *mc_list) +{ + u32 mfilt[2], val; + u8 pos; + struct netdev_hw_addr *ha; + + mfilt[0] = 0; + mfilt[1] = 0; + + netdev_hw_addr_list_for_each(ha, mc_list) { + /* calculate XOR of eight 6-bit values */ + val = get_unaligned_le32(ha->addr + 0); + pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; + val = get_unaligned_le32(ha->addr + 3); + pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; + pos &= 0x3f; + mfilt[pos / 32] |= (1 << (pos % 32)); + /* XXX: we might be able to just do this instead, + * but not sure, needs testing, if we do use this we'd + * need to inform below not to reset the mcast */ + /* ath5k_hw_set_mcast_filterindex(ah, + * ha->addr[5]); */ + } + + return ((u64)(mfilt[1]) << 32) | mfilt[0]; +} + + +/* + * o always accept unicast, broadcast, and multicast traffic + * o multicast traffic for all BSSIDs will be enabled if mac80211 + * says it should be + * o maintain current state of phy ofdm or phy cck error reception. + * If the hardware detects any of these type of errors then + * ath5k_hw_get_rx_filter() will pass to us the respective + * hardware filters to be able to receive these type of frames. + * o probe request frames are accepted only when operating in + * hostap, adhoc, or monitor modes + * o enable promiscuous mode according to the interface state + * o accept beacons: + * - when operating in adhoc mode so the 802.11 layer creates + * node table entries for peers, + * - when operating in station mode for collecting rssi data when + * the station is otherwise quiet, or + * - when scanning + */ +static void +ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, + unsigned int *new_flags, u64 multicast) +{ +#define SUPPORTED_FIF_FLAGS \ + (FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \ + FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \ + FIF_BCN_PRBRESP_PROMISC) + + struct ath5k_hw *ah = hw->priv; + u32 mfilt[2], rfilt; + struct ath5k_vif_iter_data iter_data; /* to count STA interfaces */ + + mutex_lock(&ah->lock); + + mfilt[0] = multicast; + mfilt[1] = multicast >> 32; + + /* Only deal with supported flags */ + changed_flags &= SUPPORTED_FIF_FLAGS; + *new_flags &= SUPPORTED_FIF_FLAGS; + + /* If HW detects any phy or radar errors, leave those filters on. + * Also, always enable Unicast, Broadcasts and Multicast + * XXX: move unicast, bssid broadcasts and multicast to mac80211 */ + rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) | + (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST | + AR5K_RX_FILTER_MCAST); + + if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) { + if (*new_flags & FIF_PROMISC_IN_BSS) + __set_bit(ATH_STAT_PROMISC, ah->status); + else + __clear_bit(ATH_STAT_PROMISC, ah->status); + } + + if (test_bit(ATH_STAT_PROMISC, ah->status)) + rfilt |= AR5K_RX_FILTER_PROM; + + /* Note, AR5K_RX_FILTER_MCAST is already enabled */ + if (*new_flags & FIF_ALLMULTI) { + mfilt[0] = ~0; + mfilt[1] = ~0; + } + + /* This is the best we can do */ + if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL)) + rfilt |= AR5K_RX_FILTER_PHYERR; + + /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons + * and probes for any BSSID */ + if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (ah->nvifs > 1)) + rfilt |= AR5K_RX_FILTER_BEACON; + + /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not + * set we should only pass on control frames for this + * station. This needs testing. I believe right now this + * enables *all* control frames, which is OK.. but + * but we should see if we can improve on granularity */ + if (*new_flags & FIF_CONTROL) + rfilt |= AR5K_RX_FILTER_CONTROL; + + /* Additional settings per mode -- this is per ath5k */ + + /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */ + + switch (ah->opmode) { + case NL80211_IFTYPE_MESH_POINT: + rfilt |= AR5K_RX_FILTER_CONTROL | + AR5K_RX_FILTER_BEACON | + AR5K_RX_FILTER_PROBEREQ | + AR5K_RX_FILTER_PROM; + break; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_ADHOC: + rfilt |= AR5K_RX_FILTER_PROBEREQ | + AR5K_RX_FILTER_BEACON; + break; + case NL80211_IFTYPE_STATION: + if (ah->assoc) + rfilt |= AR5K_RX_FILTER_BEACON; + default: + break; + } + + iter_data.hw_macaddr = NULL; + iter_data.n_stas = 0; + iter_data.need_set_hw_addr = false; + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); + + /* Set up RX Filter */ + if (iter_data.n_stas > 1) { + /* If you have multiple STA interfaces connected to + * different APs, ARPs are not received (most of the time?) + * Enabling PROMISC appears to fix that problem. + */ + rfilt |= AR5K_RX_FILTER_PROM; + } + + /* Set filters */ + ath5k_hw_set_rx_filter(ah, rfilt); + + /* Set multicast bits */ + ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); + /* Set the cached hw filter flags, this will later actually + * be set in HW */ + ah->filter_flags = rfilt; + + mutex_unlock(&ah->lock); +} + + +static int +ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct ath5k_hw *ah = hw->priv; + struct ath_common *common = ath5k_hw_common(ah); + int ret = 0; + + if (ath5k_modparam_nohwcrypt) + return -EOPNOTSUPP; + + if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) + return -EOPNOTSUPP; + + if (vif->type == NL80211_IFTYPE_ADHOC && + (key->cipher == WLAN_CIPHER_SUITE_TKIP || + key->cipher == WLAN_CIPHER_SUITE_CCMP) && + !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { + /* don't program group keys when using IBSS_RSN */ + return -EOPNOTSUPP; + } + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + case WLAN_CIPHER_SUITE_TKIP: + break; + case WLAN_CIPHER_SUITE_CCMP: + if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM) + break; + return -EOPNOTSUPP; + default: + WARN_ON(1); + return -EINVAL; + } + + mutex_lock(&ah->lock); + + switch (cmd) { + case SET_KEY: + ret = ath_key_config(common, vif, sta, key); + if (ret >= 0) { + key->hw_key_idx = ret; + /* push IV and Michael MIC generation to stack */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + if (key->cipher == WLAN_CIPHER_SUITE_TKIP) + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + if (key->cipher == WLAN_CIPHER_SUITE_CCMP) + key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; + ret = 0; + } + break; + case DISABLE_KEY: + ath_key_delete(common, key); + break; + default: + ret = -EINVAL; + } + + mmiowb(); + mutex_unlock(&ah->lock); + return ret; +} + + +static void +ath5k_sw_scan_start(struct ieee80211_hw *hw) +{ + struct ath5k_hw *ah = hw->priv; + if (!ah->assoc) + ath5k_hw_set_ledstate(ah, AR5K_LED_SCAN); +} + + +static void +ath5k_sw_scan_complete(struct ieee80211_hw *hw) +{ + struct ath5k_hw *ah = hw->priv; + ath5k_hw_set_ledstate(ah, ah->assoc ? + AR5K_LED_ASSOC : AR5K_LED_INIT); +} + + +static int +ath5k_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) +{ + struct ath5k_hw *ah = hw->priv; + + /* Force update */ + ath5k_hw_update_mib_counters(ah); + + stats->dot11ACKFailureCount = ah->stats.ack_fail; + stats->dot11RTSFailureCount = ah->stats.rts_fail; + stats->dot11RTSSuccessCount = ah->stats.rts_ok; + stats->dot11FCSErrorCount = ah->stats.fcs_error; + + return 0; +} + + +static int +ath5k_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct ath5k_hw *ah = hw->priv; + struct ath5k_txq_info qi; + int ret = 0; + + if (queue >= ah->ah_capabilities.cap_queues.q_tx_num) + return 0; + + mutex_lock(&ah->lock); + + ath5k_hw_get_tx_queueprops(ah, queue, &qi); + + qi.tqi_aifs = params->aifs; + qi.tqi_cw_min = params->cw_min; + qi.tqi_cw_max = params->cw_max; + qi.tqi_burst_time = params->txop * 32; + + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, + "Configure tx [queue %d], " + "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", + queue, params->aifs, params->cw_min, + params->cw_max, params->txop); + + if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) { + ATH5K_ERR(ah, + "Unable to update hardware queue %u!\n", queue); + ret = -EIO; + } else + ath5k_hw_reset_tx_queue(ah, queue); + + mutex_unlock(&ah->lock); + + return ret; +} + + +static u64 +ath5k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + + return ath5k_hw_get_tsf64(ah); +} + + +static void +ath5k_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u64 tsf) +{ + struct ath5k_hw *ah = hw->priv; + + ath5k_hw_set_tsf64(ah, tsf); +} + + +static void +ath5k_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + + /* + * in IBSS mode we need to update the beacon timers too. + * this will also reset the TSF if we call it with 0 + */ + if (ah->opmode == NL80211_IFTYPE_ADHOC) + ath5k_beacon_update_timers(ah, 0); + else + ath5k_hw_reset_tsf(ah); +} + + +static int +ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey) +{ + struct ath5k_hw *ah = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + struct ath_common *common = ath5k_hw_common(ah); + struct ath_cycle_counters *cc = &common->cc_survey; + unsigned int div = common->clockrate * 1000; + + if (idx != 0) + return -ENOENT; + + spin_lock_bh(&common->cc_lock); + ath_hw_cycle_counters_update(common); + if (cc->cycles > 0) { + ah->survey.channel_time += cc->cycles / div; + ah->survey.channel_time_busy += cc->rx_busy / div; + ah->survey.channel_time_rx += cc->rx_frame / div; + ah->survey.channel_time_tx += cc->tx_frame / div; + } + memset(cc, 0, sizeof(*cc)); + spin_unlock_bh(&common->cc_lock); + + memcpy(survey, &ah->survey, sizeof(*survey)); + + survey->channel = conf->chandef.chan; + survey->noise = ah->ah_noise_floor; + survey->filled = SURVEY_INFO_NOISE_DBM | + SURVEY_INFO_IN_USE | + SURVEY_INFO_CHANNEL_TIME | + SURVEY_INFO_CHANNEL_TIME_BUSY | + SURVEY_INFO_CHANNEL_TIME_RX | + SURVEY_INFO_CHANNEL_TIME_TX; + + return 0; +} + + +/** + * ath5k_set_coverage_class - Set IEEE 802.11 coverage class + * + * @hw: struct ieee80211_hw pointer + * @coverage_class: IEEE 802.11 coverage class number + * + * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given + * coverage class. The values are persistent, they are restored after device + * reset. + */ +static void +ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) +{ + struct ath5k_hw *ah = hw->priv; + + mutex_lock(&ah->lock); + ath5k_hw_set_coverage_class(ah, coverage_class); + mutex_unlock(&ah->lock); +} + + +static int +ath5k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) +{ + struct ath5k_hw *ah = hw->priv; + + if (tx_ant == 1 && rx_ant == 1) + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A); + else if (tx_ant == 2 && rx_ant == 2) + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B); + else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3) + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); + else + return -EINVAL; + return 0; +} + + +static int +ath5k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) +{ + struct ath5k_hw *ah = hw->priv; + + switch (ah->ah_ant_mode) { + case AR5K_ANTMODE_FIXED_A: + *tx_ant = 1; *rx_ant = 1; break; + case AR5K_ANTMODE_FIXED_B: + *tx_ant = 2; *rx_ant = 2; break; + case AR5K_ANTMODE_DEFAULT: + *tx_ant = 3; *rx_ant = 3; break; + } + return 0; +} + + +static void ath5k_get_ringparam(struct ieee80211_hw *hw, + u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max) +{ + struct ath5k_hw *ah = hw->priv; + + *tx = ah->txqs[AR5K_TX_QUEUE_ID_DATA_MIN].txq_max; + + *tx_max = ATH5K_TXQ_LEN_MAX; + *rx = *rx_max = ATH_RXBUF; +} + + +static int ath5k_set_ringparam(struct ieee80211_hw *hw, u32 tx, u32 rx) +{ + struct ath5k_hw *ah = hw->priv; + u16 qnum; + + /* only support setting tx ring size for now */ + if (rx != ATH_RXBUF) + return -EINVAL; + + /* restrict tx ring size min/max */ + if (!tx || tx > ATH5K_TXQ_LEN_MAX) + return -EINVAL; + + for (qnum = 0; qnum < ARRAY_SIZE(ah->txqs); qnum++) { + if (!ah->txqs[qnum].setup) + continue; + if (ah->txqs[qnum].qnum < AR5K_TX_QUEUE_ID_DATA_MIN || + ah->txqs[qnum].qnum > AR5K_TX_QUEUE_ID_DATA_MAX) + continue; + + ah->txqs[qnum].txq_max = tx; + if (ah->txqs[qnum].txq_len >= ah->txqs[qnum].txq_max) + ieee80211_stop_queue(hw, ah->txqs[qnum].qnum); + } + + return 0; +} + + +const struct ieee80211_ops ath5k_hw_ops = { + .tx = ath5k_tx, + .start = ath5k_start, + .stop = ath5k_stop, + .add_interface = ath5k_add_interface, + /* .change_interface = not implemented */ + .remove_interface = ath5k_remove_interface, + .config = ath5k_config, + .bss_info_changed = ath5k_bss_info_changed, + .prepare_multicast = ath5k_prepare_multicast, + .configure_filter = ath5k_configure_filter, + /* .set_tim = not implemented */ + .set_key = ath5k_set_key, + /* .update_tkip_key = not implemented */ + /* .hw_scan = not implemented */ + .sw_scan_start = ath5k_sw_scan_start, + .sw_scan_complete = ath5k_sw_scan_complete, + .get_stats = ath5k_get_stats, + /* .get_tkip_seq = not implemented */ + /* .set_frag_threshold = not implemented */ + /* .set_rts_threshold = not implemented */ + /* .sta_add = not implemented */ + /* .sta_remove = not implemented */ + /* .sta_notify = not implemented */ + .conf_tx = ath5k_conf_tx, + .get_tsf = ath5k_get_tsf, + .set_tsf = ath5k_set_tsf, + .reset_tsf = ath5k_reset_tsf, + /* .tx_last_beacon = not implemented */ + /* .ampdu_action = not needed */ + .get_survey = ath5k_get_survey, + .set_coverage_class = ath5k_set_coverage_class, + /* .rfkill_poll = not implemented */ + /* .flush = not implemented */ + /* .channel_switch = not implemented */ + /* .napi_poll = not implemented */ + .set_antenna = ath5k_set_antenna, + .get_antenna = ath5k_get_antenna, + .set_ringparam = ath5k_set_ringparam, + .get_ringparam = ath5k_get_ringparam, +}; diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c new file mode 100644 index 00000000000..859db7c34f8 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -0,0 +1,343 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/nl80211.h> +#include <linux/pci.h> +#include <linux/pci-aspm.h> +#include <linux/etherdevice.h> +#include <linux/module.h> +#include "../ath.h" +#include "ath5k.h" +#include "debug.h" +#include "base.h" +#include "reg.h" + +/* Known PCI ids */ +static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = { + { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */ + { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */ + { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/ + { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */ + { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */ + { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */ + { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */ + { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */ + { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */ + { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ + { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ + { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */ + { PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */ + { 0 } +}; +MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); + +/* return bus cachesize in 4B word units */ +static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz) +{ + struct ath5k_hw *ah = (struct ath5k_hw *) common->priv; + u8 u8tmp; + + pci_read_config_byte(ah->pdev, PCI_CACHE_LINE_SIZE, &u8tmp); + *csz = (int)u8tmp; + + /* + * This check was put in to avoid "unpleasant" consequences if + * the bootrom has not fully initialized all PCI devices. + * Sometimes the cache line size register is not set + */ + + if (*csz == 0) + *csz = L1_CACHE_BYTES >> 2; /* Use the default size */ +} + +/* + * Read from eeprom + */ +static bool +ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data) +{ + struct ath5k_hw *ah = (struct ath5k_hw *) common->ah; + u32 status, timeout; + + /* + * Initialize EEPROM access + */ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_READ); + } + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_RDDONE) { + if (status & AR5K_EEPROM_STAT_RDERR) + return false; + *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & + 0xffff); + return true; + } + usleep_range(15, 20); + } + + return false; +} + +int ath5k_hw_read_srev(struct ath5k_hw *ah) +{ + ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV); + return 0; +} + +/* + * Read the MAC address from eeprom or platform_data + */ +static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + u8 mac_d[ETH_ALEN] = {}; + u32 total, offset; + u16 data; + int octet; + + AR5K_EEPROM_READ(0x20, data); + + for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { + AR5K_EEPROM_READ(offset, data); + + total += data; + mac_d[octet + 1] = data & 0xff; + mac_d[octet] = data >> 8; + octet += 2; + } + + if (!total || total == 3 * 0xffff) + return -EINVAL; + + memcpy(mac, mac_d, ETH_ALEN); + + return 0; +} + + +/* Common ath_bus_opts structure */ +static const struct ath_bus_ops ath_pci_bus_ops = { + .ath_bus_type = ATH_PCI, + .read_cachesize = ath5k_pci_read_cachesize, + .eeprom_read = ath5k_pci_eeprom_read, + .eeprom_read_mac = ath5k_pci_eeprom_read_mac, +}; + +/********************\ +* PCI Initialization * +\********************/ + +static int +ath5k_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + void __iomem *mem; + struct ath5k_hw *ah; + struct ieee80211_hw *hw; + int ret; + u8 csz; + + /* + * L0s needs to be disabled on all ath5k cards. + * + * For distributions shipping with CONFIG_PCIEASPM (this will be enabled + * by default in the future in 2.6.36) this will also mean both L1 and + * L0s will be disabled when a pre 1.1 PCIe device is detected. We do + * know L1 works correctly even for all ath5k pre 1.1 PCIe devices + * though but cannot currently undue the effect of a blacklist, for + * details you can read pcie_aspm_sanity_check() and see how it adjusts + * the device link capability. + * + * It may be possible in the future to implement some PCI API to allow + * drivers to override blacklists for pre 1.1 PCIe but for now it is + * best to accept that both L0s and L1 will be disabled completely for + * distributions shipping with CONFIG_PCIEASPM rather than having this + * issue present. Motivation for adding this new API will be to help + * with power consumption for some of these devices. + */ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device\n"); + goto err; + } + + /* XXX 32-bit addressing only */ + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "32-bit DMA not available\n"); + goto err_dis; + } + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * Linux 2.4.18 (at least) writes the cache line size + * register as a 16-bit wide register which is wrong. + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = L1_CACHE_BYTES >> 2; + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + /* Enable bus mastering */ + pci_set_master(pdev); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_write_config_byte(pdev, 0x41, 0); + + ret = pci_request_region(pdev, 0, "ath5k"); + if (ret) { + dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); + goto err_dis; + } + + mem = pci_iomap(pdev, 0, 0); + if (!mem) { + dev_err(&pdev->dev, "cannot remap PCI memory region\n"); + ret = -EIO; + goto err_reg; + } + + /* + * Allocate hw (mac80211 main struct) + * and hw->priv (driver private data) + */ + hw = ieee80211_alloc_hw(sizeof(*ah), &ath5k_hw_ops); + if (hw == NULL) { + dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); + ret = -ENOMEM; + goto err_map; + } + + dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); + + ah = hw->priv; + ah->hw = hw; + ah->pdev = pdev; + ah->dev = &pdev->dev; + ah->irq = pdev->irq; + ah->devid = id->device; + ah->iobase = mem; /* So we can unmap it on detach */ + + /* Initialize */ + ret = ath5k_init_ah(ah, &ath_pci_bus_ops); + if (ret) + goto err_free; + + /* Set private data */ + pci_set_drvdata(pdev, hw); + + return 0; +err_free: + ieee80211_free_hw(hw); +err_map: + pci_iounmap(pdev, mem); +err_reg: + pci_release_region(pdev, 0); +err_dis: + pci_disable_device(pdev); +err: + return ret; +} + +static void +ath5k_pci_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_hw *ah = hw->priv; + + ath5k_deinit_ah(ah); + pci_iounmap(pdev, ah->iobase); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + ieee80211_free_hw(hw); +} + +#ifdef CONFIG_PM_SLEEP +static int ath5k_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_hw *ah = hw->priv; + + ath5k_led_off(ah); + return 0; +} + +static int ath5k_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_hw *ah = hw->priv; + + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_write_config_byte(pdev, 0x41, 0); + + ath5k_led_enable(ah); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); +#define ATH5K_PM_OPS (&ath5k_pm_ops) +#else +#define ATH5K_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct pci_driver ath5k_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ath5k_pci_id_table, + .probe = ath5k_pci_probe, + .remove = ath5k_pci_remove, + .driver.pm = ATH5K_PM_OPS, +}; + +module_pci_driver(ath5k_pci_driver); diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 074b4c64439..c60d36aa13e 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -29,101 +29,220 @@ #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" + +/** + * DOC: Protocol Control Unit (PCU) functions + * + * Protocol control unit is responsible to maintain various protocol + * properties before a frame is send and after a frame is received to/from + * baseband. To be more specific, PCU handles: + * + * - Buffering of RX and TX frames (after QCU/DCUs) + * + * - Encrypting and decrypting (using the built-in engine) + * + * - Generating ACKs, RTS/CTS frames + * + * - Maintaining TSF + * + * - FCS + * + * - Updating beacon data (with TSF etc) + * + * - Generating virtual CCA + * + * - RX/Multicast filtering + * + * - BSSID filtering + * + * - Various statistics + * + * -Different operating modes: AP, STA, IBSS + * + * Note: Most of these functions can be tweaked/bypassed so you can do + * them on sw above for debugging or research. For more infos check out PCU + * registers on reg.h. + */ + +/** + * DOC: ACK rates + * + * AR5212+ can use higher rates for ack transmission + * based on current tx rate instead of the base rate. + * It does this to better utilize channel usage. + * There is a mapping between G rates (that cover both + * CCK and OFDM) and ack rates that we use when setting + * rate -> duration table. This mapping is hw-based so + * don't change anything. + * + * To enable this functionality we must set + * ah->ah_ack_bitrate_high to true else base rate is + * used (1Mb for CCK, 6Mb for OFDM). + */ +static const unsigned int ack_rates_high[] = +/* Tx -> ACK */ +/* 1Mb -> 1Mb */ { 0, +/* 2MB -> 2Mb */ 1, +/* 5.5Mb -> 2Mb */ 1, +/* 11Mb -> 2Mb */ 1, +/* 6Mb -> 6Mb */ 4, +/* 9Mb -> 6Mb */ 4, +/* 12Mb -> 12Mb */ 6, +/* 18Mb -> 12Mb */ 6, +/* 24Mb -> 24Mb */ 8, +/* 36Mb -> 24Mb */ 8, +/* 48Mb -> 24Mb */ 8, +/* 54Mb -> 24Mb */ 8 }; /*******************\ -* Generic functions * +* Helper functions * \*******************/ /** - * ath5k_hw_set_opmode - Set PCU operating mode - * + * ath5k_hw_get_frame_duration() - Get tx time of a frame * @ah: The &struct ath5k_hw - * @op_mode: &enum nl80211_iftype operating mode + * @len: Frame's length in bytes + * @rate: The @struct ieee80211_rate + * @shortpre: Indicate short preample * - * Initialize PCU for the various operating modes (AP/STA etc) + * Calculate tx duration of a frame given it's rate and length + * It extends ieee80211_generic_frame_duration for non standard + * bwmodes. */ -int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +int +ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band, + int len, struct ieee80211_rate *rate, bool shortpre) { - struct ath_common *common = ath5k_hw_common(ah); - u32 pcu_reg, beacon_reg, low_id, high_id; + int sifs, preamble, plcp_bits, sym_time; + int bitrate, bits, symbols, symbol_bits; + int dur; - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode); + /* Fallback */ + if (!ah->ah_bwmode) { + __le16 raw_dur = ieee80211_generic_frame_duration(ah->hw, + NULL, band, len, rate); - /* Preserve rest settings */ - pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; - pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP - | AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); + /* subtract difference between long and short preamble */ + dur = le16_to_cpu(raw_dur); + if (shortpre) + dur -= 96; - beacon_reg = 0; + return dur; + } - switch (op_mode) { - case NL80211_IFTYPE_ADHOC: - pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE; - beacon_reg |= AR5K_BCR_ADHOC; - if (ah->ah_version == AR5K_AR5210) - pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; - else - AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); - break; + bitrate = rate->bitrate; + preamble = AR5K_INIT_OFDM_PREAMPLE_TIME; + plcp_bits = AR5K_INIT_OFDM_PLCP_BITS; + sym_time = AR5K_INIT_OFDM_SYMBOL_TIME; - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_MESH_POINT: - pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE; - beacon_reg |= AR5K_BCR_AP; - if (ah->ah_version == AR5K_AR5210) - pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; - else - AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + sifs = AR5K_INIT_SIFS_TURBO; + preamble = AR5K_INIT_OFDM_PREAMBLE_TIME_MIN; break; - - case NL80211_IFTYPE_STATION: - pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_PWR_SV : 0); - case NL80211_IFTYPE_MONITOR: - pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE - | (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); + case AR5K_BWMODE_10MHZ: + sifs = AR5K_INIT_SIFS_HALF_RATE; + preamble *= 2; + sym_time *= 2; + bitrate = DIV_ROUND_UP(bitrate, 2); + break; + case AR5K_BWMODE_5MHZ: + sifs = AR5K_INIT_SIFS_QUARTER_RATE; + preamble *= 4; + sym_time *= 4; + bitrate = DIV_ROUND_UP(bitrate, 4); + break; + default: + sifs = AR5K_INIT_SIFS_DEFAULT_BG; break; + } + + bits = plcp_bits + (len << 3); + /* Bit rate is in 100Kbits */ + symbol_bits = bitrate * sym_time; + symbols = DIV_ROUND_UP(bits * 10, symbol_bits); + + dur = sifs + preamble + (sym_time * symbols); + + return dur; +} +/** + * ath5k_hw_get_default_slottime() - Get the default slot time for current mode + * @ah: The &struct ath5k_hw + */ +unsigned int +ath5k_hw_get_default_slottime(struct ath5k_hw *ah) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + unsigned int slot_time; + + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + slot_time = AR5K_INIT_SLOT_TIME_TURBO; + break; + case AR5K_BWMODE_10MHZ: + slot_time = AR5K_INIT_SLOT_TIME_HALF_RATE; + break; + case AR5K_BWMODE_5MHZ: + slot_time = AR5K_INIT_SLOT_TIME_QUARTER_RATE; + break; + case AR5K_BWMODE_DEFAULT: default: - return -EINVAL; + slot_time = AR5K_INIT_SLOT_TIME_DEFAULT; + if ((channel->hw_value == AR5K_MODE_11B) && !ah->ah_short_slot) + slot_time = AR5K_INIT_SLOT_TIME_B; + break; } - /* - * Set PCU registers - */ - low_id = get_unaligned_le32(common->macaddr); - high_id = get_unaligned_le16(common->macaddr + 4); - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + return slot_time; +} - /* - * Set Beacon Control Register on 5210 - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); +/** + * ath5k_hw_get_default_sifs() - Get the default SIFS for current mode + * @ah: The &struct ath5k_hw + */ +unsigned int +ath5k_hw_get_default_sifs(struct ath5k_hw *ah) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + unsigned int sifs; - return 0; + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + sifs = AR5K_INIT_SIFS_TURBO; + break; + case AR5K_BWMODE_10MHZ: + sifs = AR5K_INIT_SIFS_HALF_RATE; + break; + case AR5K_BWMODE_5MHZ: + sifs = AR5K_INIT_SIFS_QUARTER_RATE; + break; + case AR5K_BWMODE_DEFAULT: + sifs = AR5K_INIT_SIFS_DEFAULT_BG; + default: + if (channel->band == IEEE80211_BAND_5GHZ) + sifs = AR5K_INIT_SIFS_DEFAULT_A; + break; + } + + return sifs; } /** - * ath5k_hw_update - Update MIB counters (mac layer statistics) - * + * ath5k_hw_update_mib_counters() - Update MIB counters (mac layer statistics) * @ah: The &struct ath5k_hw * * Reads MIB counters from PCU and updates sw statistics. Is called after a * MIB interrupt, because one of these counters might have reached their maximum * and triggered the MIB interrupt, to let us read and clear the counter. * - * Is called in interrupt context! + * NOTE: Is called in interrupt context! */ -void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) +void +ath5k_hw_update_mib_counters(struct ath5k_hw *ah) { - struct ath5k_statistics *stats = &ah->ah_sc->stats; + struct ath5k_statistics *stats = &ah->stats; /* Read-And-Clear */ stats->ack_fail += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); @@ -133,43 +252,79 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) stats->beacons += ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); } + +/******************\ +* ACK/CTS Timeouts * +\******************/ + /** - * ath5k_hw_set_ack_bitrate - set bitrate for ACKs - * + * ath5k_hw_write_rate_duration() - Fill rate code to duration table * @ah: The &struct ath5k_hw - * @high: Flag to determine if we want to use high transmission rate - * for ACKs or not * - * If high flag is set, we tell hw to use a set of control rates based on - * the current transmission rate (check out control_rates array inside reset.c). - * If not hw just uses the lowest rate available for the current modulation - * scheme being used (1Mbit for CCK and 6Mbits for OFDM). + * Write the rate code to duration table upon hw reset. This is a helper for + * ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on + * the hardware, based on current mode, for each rate. The rates which are + * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have + * different rate code so we write their value twice (one for long preamble + * and one for short). + * + * Note: Band doesn't matter here, if we set the values for OFDM it works + * on both a and g modes. So all we have to do is set values for all g rates + * that include all OFDM and CCK rates. + * */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) +static inline void +ath5k_hw_write_rate_duration(struct ath5k_hw *ah) { - if (ah->ah_version != AR5K_AR5212) - return; - else { - u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; - if (high) - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + struct ieee80211_rate *rate; + unsigned int i; + /* 802.11g covers both OFDM and CCK */ + u8 band = IEEE80211_BAND_2GHZ; + + /* Write rate duration table */ + for (i = 0; i < ah->sbands[band].n_bitrates; i++) { + u32 reg; + u16 tx_time; + + if (ah->ah_ack_bitrate_high) + rate = &ah->sbands[band].bitrates[ack_rates_high[i]]; + /* CCK -> 1Mb */ + else if (i < 4) + rate = &ah->sbands[band].bitrates[0]; + /* OFDM -> 6Mb */ else - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); - } -} + rate = &ah->sbands[band].bitrates[4]; + /* Set ACK timeout */ + reg = AR5K_RATE_DUR(rate->hw_value); -/******************\ -* ACK/CTS Timeouts * -\******************/ + /* An ACK frame consists of 10 bytes. If you add the FCS, + * which ieee80211_generic_frame_duration() adds, + * its 14 bytes. Note we use the control rate and not the + * actual rate for this rate. See mac80211 tx.c + * ieee80211_duration() for a brief description of + * what rate we should choose to TX ACKs. */ + tx_time = ath5k_hw_get_frame_duration(ah, band, 10, + rate, false); + + ath5k_hw_reg_write(ah, tx_time, reg); + + if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) + continue; + + tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, true); + ath5k_hw_reg_write(ah, tx_time, + reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } +} /** - * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU - * + * ath5k_hw_set_ack_timeout() - Set ACK timeout on PCU * @ah: The &struct ath5k_hw * @timeout: Timeout in usec */ -static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +static int +ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) { if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK)) <= timeout) @@ -182,12 +337,12 @@ static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) } /** - * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU - * + * ath5k_hw_set_cts_timeout() - Set CTS timeout on PCU * @ah: The &struct ath5k_hw * @timeout: Timeout in usec */ -static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +static int +ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) { if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS)) <= timeout) @@ -199,98 +354,20 @@ static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) return 0; } -/** - * ath5k_hw_htoclock - Translate usec to hw clock units - * - * @ah: The &struct ath5k_hw - * @usec: value in microseconds - */ -unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) -{ - struct ath_common *common = ath5k_hw_common(ah); - return usec * common->clockrate; -} - -/** - * ath5k_hw_clocktoh - Translate hw clock units to usec - * @clock: value in hw clock units - */ -unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) -{ - struct ath_common *common = ath5k_hw_common(ah); - return clock / common->clockrate; -} - -/** - * ath5k_hw_set_clockrate - Set common->clockrate for the current channel - * - * @ah: The &struct ath5k_hw - */ -void ath5k_hw_set_clockrate(struct ath5k_hw *ah) -{ - struct ieee80211_channel *channel = ah->ah_current_channel; - struct ath_common *common = ath5k_hw_common(ah); - int clock; - if (channel->hw_value & CHANNEL_5GHZ) - clock = 40; /* 802.11a */ - else if (channel->hw_value & CHANNEL_CCK) - clock = 22; /* 802.11b */ - else - clock = 44; /* 802.11g */ - - /* Clock rate in turbo modes is twice the normal rate */ - if (channel->hw_value & CHANNEL_TURBO) - clock *= 2; - - common->clockrate = clock; -} - -/** - * ath5k_hw_get_default_slottime - Get the default slot time for current mode - * - * @ah: The &struct ath5k_hw - */ -static unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah) -{ - struct ieee80211_channel *channel = ah->ah_current_channel; - - if (channel->hw_value & CHANNEL_TURBO) - return 6; /* both turbo modes */ - - if (channel->hw_value & CHANNEL_CCK) - return 20; /* 802.11b */ - - return 9; /* 802.11 a/g */ -} - -/** - * ath5k_hw_get_default_sifs - Get the default SIFS for current mode - * - * @ah: The &struct ath5k_hw - */ -static unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah) -{ - struct ieee80211_channel *channel = ah->ah_current_channel; - - if (channel->hw_value & CHANNEL_TURBO) - return 8; /* both turbo modes */ - - if (channel->hw_value & CHANNEL_5GHZ) - return 16; /* 802.11a */ - - return 10; /* 802.11 b/g */ -} +/*******************\ +* RX filter Control * +\*******************/ /** - * ath5k_hw_set_lladdr - Set station id - * + * ath5k_hw_set_lladdr() - Set station id * @ah: The &struct ath5k_hw - * @mac: The card's mac address + * @mac: The card's mac address (array of octets) * * Set station id on hw using the provided mac address */ -int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +int +ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) { struct ath_common *common = ath5k_hw_common(ah); u32 low_id, high_id; @@ -311,14 +388,14 @@ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) } /** - * ath5k_hw_set_bssid - Set current BSSID on hw - * + * ath5k_hw_set_bssid() - Set current BSSID on hw * @ah: The &struct ath5k_hw * * Sets the current BSSID and BSSID mask we have from the * common struct into the hardware */ -void ath5k_hw_set_bssid(struct ath5k_hw *ah) +void +ath5k_hw_set_bssid(struct ath5k_hw *ah) { struct ath_common *common = ath5k_hw_common(ah); u16 tim_offset = 0; @@ -351,7 +428,23 @@ void ath5k_hw_set_bssid(struct ath5k_hw *ah) ath5k_hw_enable_pspoll(ah, NULL, 0); } -void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +/** + * ath5k_hw_set_bssid_mask() - Filter out bssids we listen + * @ah: The &struct ath5k_hw + * @mask: The BSSID mask to set (array of octets) + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * For more information check out ../hw.c of the common ath module. + */ +void +ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) { struct ath_common *common = ath5k_hw_common(ah); @@ -362,51 +455,21 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) ath_hw_setbssidmask(common); } -/************\ -* RX Control * -\************/ - -/** - * ath5k_hw_start_rx_pcu - Start RX engine - * - * @ah: The &struct ath5k_hw - * - * Starts RX engine on PCU so that hw can process RXed frames - * (ACK etc). - * - * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma - */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) -{ - AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); -} - /** - * at5k_hw_stop_rx_pcu - Stop RX engine - * + * ath5k_hw_set_mcast_filter() - Set multicast filter * @ah: The &struct ath5k_hw - * - * Stops RX engine on PCU - * - * TODO: Detach ANI here - */ -void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) -{ - AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); -} - -/* - * Set multicast filter + * @filter0: Lower 32bits of muticast filter + * @filter1: Higher 16bits of multicast filter */ -void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +void +ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) { ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); } /** - * ath5k_hw_get_rx_filter - Get current rx filter - * + * ath5k_hw_get_rx_filter() - Get current rx filter * @ah: The &struct ath5k_hw * * Returns the RX filter by reading rx filter and @@ -415,7 +478,8 @@ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) * and pass to the driver. For a list of frame types * check out reg.h. */ -u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +u32 +ath5k_hw_get_rx_filter(struct ath5k_hw *ah) { u32 data, filter = 0; @@ -435,8 +499,7 @@ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) } /** - * ath5k_hw_set_rx_filter - Set rx filter - * + * ath5k_hw_set_rx_filter() - Set rx filter * @ah: The &struct ath5k_hw * @filter: RX filter mask (see reg.h) * @@ -444,7 +507,8 @@ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) * register on 5212 and newer chips so that we have proper PHY * error reporting. */ -void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +void +ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) { u32 data = 0; @@ -457,7 +521,7 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) } /* - * The AR5210 uses promiscous mode to detect radar activity + * The AR5210 uses promiscuous mode to detect radar activity */ if (ah->ah_version == AR5K_AR5210 && (filter & AR5K_RX_FILTER_RADARERR)) { @@ -488,13 +552,13 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) #define ATH5K_MAX_TSF_READ 10 /** - * ath5k_hw_get_tsf64 - Get the full 64bit TSF - * + * ath5k_hw_get_tsf64() - Get the full 64bit TSF * @ah: The &struct ath5k_hw * * Returns the current TSF */ -u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) +u64 +ath5k_hw_get_tsf64(struct ath5k_hw *ah) { u32 tsf_lower, tsf_upper1, tsf_upper2; int i; @@ -526,33 +590,35 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) local_irq_restore(flags); - WARN_ON( i == ATH5K_MAX_TSF_READ ); + WARN_ON(i == ATH5K_MAX_TSF_READ); - return (((u64)tsf_upper1 << 32) | tsf_lower); + return ((u64)tsf_upper1 << 32) | tsf_lower; } +#undef ATH5K_MAX_TSF_READ + /** - * ath5k_hw_set_tsf64 - Set a new 64bit TSF - * + * ath5k_hw_set_tsf64() - Set a new 64bit TSF * @ah: The &struct ath5k_hw * @tsf64: The new 64bit TSF * * Sets the new TSF */ -void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64) +void +ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64) { ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32); ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32); } /** - * ath5k_hw_reset_tsf - Force a TSF reset - * + * ath5k_hw_reset_tsf() - Force a TSF reset * @ah: The &struct ath5k_hw * * Forces a TSF reset on PCU */ -void ath5k_hw_reset_tsf(struct ath5k_hw *ah) +void +ath5k_hw_reset_tsf(struct ath5k_hw *ah) { u32 val; @@ -568,17 +634,24 @@ void ath5k_hw_reset_tsf(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, val, AR5K_BEACON); } -/* - * Initialize beacon timers +/** + * ath5k_hw_init_beacon_timers() - Initialize beacon timers + * @ah: The &struct ath5k_hw + * @next_beacon: Next TBTT + * @interval: Current beacon interval + * + * This function is used to initialize beacon timers based on current + * operation mode and settings. */ -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +void +ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, u32 interval) { u32 timer1, timer2, timer3; /* * Set the additional timers by mode */ - switch (ah->ah_sc->opmode) { + switch (ah->opmode) { case NL80211_IFTYPE_MONITOR: case NL80211_IFTYPE_STATION: /* In STA mode timer1 is used as next wakeup @@ -615,8 +688,8 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) * Set the beacon register and enable all timers. */ /* When in AP or Mesh Point mode zero timer0 to start TSF */ - if (ah->ah_sc->opmode == NL80211_IFTYPE_AP || - ah->ah_sc->opmode == NL80211_IFTYPE_MESH_POINT) + if (ah->opmode == NL80211_IFTYPE_AP || + ah->opmode == NL80211_IFTYPE_MESH_POINT) ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); @@ -635,14 +708,14 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) /* Flush any pending BMISS interrupts on ISR by * performing a clear-on-write operation on PISR * register for the BMISS bit (writing a bit on - * ISR togles a reset for that bit and leaves - * the rest bits intact) */ + * ISR toggles a reset for that bit and leaves + * the remaining bits intact) */ if (ah->ah_version == AR5K_AR5210) ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR); else ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR); - /* TODO: Set enchanced sleep registers on AR5212 + /* TODO: Set enhanced sleep registers on AR5212 * based on vif->bss_conf params, until then * disable power save reporting.*/ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV); @@ -650,8 +723,7 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) } /** - * ath5k_check_timer_win - Check if timer B is timer A + window - * + * ath5k_check_timer_win() - Check if timer B is timer A + window * @a: timer a (before b) * @b: timer b (after a) * @window: difference between a and b @@ -681,18 +753,17 @@ ath5k_check_timer_win(int a, int b, int window, int intval) } /** - * ath5k_hw_check_beacon_timers - Check if the beacon timers are correct - * + * ath5k_hw_check_beacon_timers() - Check if the beacon timers are correct * @ah: The &struct ath5k_hw * @intval: beacon interval * - * This is a workaround for IBSS mode: + * This is a workaround for IBSS mode * * The need for this function arises from the fact that we have 4 separate * HW timer registers (TIMER0 - TIMER3), which are closely related to the * next beacon target time (NBTT), and that the HW updates these timers - * seperately based on the current TSF value. The hardware increments each - * timer by the beacon interval, when the local TSF coverted to TU is equal + * separately based on the current TSF value. The hardware increments each + * timer by the beacon interval, when the local TSF converted to TU is equal * to the value stored in the timer. * * The reception of a beacon with the same BSSID can update the local HW TSF @@ -730,7 +801,7 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) dma = ath5k_hw_reg_read(ah, AR5K_TIMER1) >> 3; /* NOTE: SWBA is different. Having a wrong window there does not - * stop us from sending data and this condition is catched thru + * stop us from sending data and this condition is caught by * other means (SWBA interrupt) */ if (ath5k_check_timer_win(nbtt, atim, 1, intval) && @@ -741,23 +812,198 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) } /** - * ath5k_hw_set_coverage_class - Set IEEE 802.11 coverage class - * + * ath5k_hw_set_coverage_class() - Set IEEE 802.11 coverage class * @ah: The &struct ath5k_hw * @coverage_class: IEEE 802.11 coverage class number * - * Sets slot time, ACK timeout and CTS timeout for given coverage class. + * Sets IFS intervals and ACK/CTS timeouts for given coverage class. */ -void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) +void +ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) { /* As defined by IEEE 802.11-2007 17.3.8.6 */ int slot_time = ath5k_hw_get_default_slottime(ah) + 3 * coverage_class; int ack_timeout = ath5k_hw_get_default_sifs(ah) + slot_time; int cts_timeout = ack_timeout; - ath5k_hw_set_slot_time(ah, slot_time); + ath5k_hw_set_ifs_intervals(ah, slot_time); ath5k_hw_set_ack_timeout(ah, ack_timeout); ath5k_hw_set_cts_timeout(ah, cts_timeout); ah->ah_coverage_class = coverage_class; } + +/***************************\ +* Init/Start/Stop functions * +\***************************/ + +/** + * ath5k_hw_start_rx_pcu() - Start RX engine + * @ah: The &struct ath5k_hw + * + * Starts RX engine on PCU so that hw can process RXed frames + * (ACK etc). + * + * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma + */ +void +ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * at5k_hw_stop_rx_pcu() - Stop RX engine + * @ah: The &struct ath5k_hw + * + * Stops RX engine on PCU + */ +void +ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +{ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * ath5k_hw_set_opmode() - Set PCU operating mode + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * + * Configure PCU for the various operating modes (AP/STA etc) + */ +int +ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +{ + struct ath_common *common = ath5k_hw_common(ah); + u32 pcu_reg, beacon_reg, low_id, high_id; + + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "mode %d\n", op_mode); + + /* Preserve rest settings */ + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP + | AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); + + beacon_reg = 0; + + switch (op_mode) { + case NL80211_IFTYPE_ADHOC: + pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE; + beacon_reg |= AR5K_BCR_ADHOC; + if (ah->ah_version == AR5K_AR5210) + pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; + else + AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + break; + + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE; + beacon_reg |= AR5K_BCR_AP; + if (ah->ah_version == AR5K_AR5210) + pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; + else + AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + break; + + case NL80211_IFTYPE_STATION: + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + case NL80211_IFTYPE_MONITOR: + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + break; + + default: + return -EINVAL; + } + + /* + * Set PCU registers + */ + low_id = get_unaligned_le32(common->macaddr); + high_id = get_unaligned_le16(common->macaddr + 4); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +/** + * ath5k_hw_pcu_init() - Initialize PCU + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * @mode: One of enum ath5k_driver_mode + * + * This function is used to initialize PCU by setting current + * operation mode and various other settings. + */ +void +ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +{ + /* Set bssid and bssid mask */ + ath5k_hw_set_bssid(ah); + + /* Set PCU config */ + ath5k_hw_set_opmode(ah, op_mode); + + /* Write rate duration table only on AR5212 and if + * virtual interface has already been brought up + * XXX: rethink this after new mode changes to + * mac80211 are integrated */ + if (ah->ah_version == AR5K_AR5212 && + ah->nvifs) + ath5k_hw_write_rate_duration(ah); + + /* Set RSSI/BRSSI thresholds + * + * Note: If we decide to set this value + * dynamically, have in mind that when AR5K_RSSI_THR + * register is read it might return 0x40 if we haven't + * wrote anything to it plus BMISS RSSI threshold is zeroed. + * So doing a save/restore procedure here isn't the right + * choice. Instead store it on ath5k_hw */ + ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES | + AR5K_TUNE_BMISS_THRES << + AR5K_RSSI_THR_BMISS_S), + AR5K_RSSI_THR); + + /* MIC QoS support */ + if (ah->ah_mac_srev >= AR5K_SREV_AR2413) { + ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL); + ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL); + } + + /* QoS NOACK Policy */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, + AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) | + AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) | + AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET), + AR5K_QOS_NOACK); + } + + /* Restore slot time and ACK timeouts */ + if (ah->ah_coverage_class > 0) + ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class); + + /* Set ACK bitrate mode (see ack_rates_high) */ + if (ah->ah_version == AR5K_AR5212) { + u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; + if (ah->ah_ack_bitrate_high) + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); + } + return; +} diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 6b43f535ff5..0fce1c76638 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1,6 +1,4 @@ /* - * PHY functions - * * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> @@ -20,20 +18,179 @@ * */ +/***********************\ +* PHY related functions * +\***********************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/delay.h> #include <linux/slab.h> +#include <asm/unaligned.h> #include "ath5k.h" #include "reg.h" -#include "base.h" #include "rfbuffer.h" #include "rfgain.h" +#include "../regd.h" -/* - * Used to modify RF Banks before writing them to AR5K_RF_BUFFER + +/** + * DOC: PHY related functions + * + * Here we handle the low-level functions related to baseband + * and analog frontend (RF) parts. This is by far the most complex + * part of the hw code so make sure you know what you are doing. + * + * Here is a list of what this is all about: + * + * - Channel setting/switching + * + * - Automatic Gain Control (AGC) calibration + * + * - Noise Floor calibration + * + * - I/Q imbalance calibration (QAM correction) + * + * - Calibration due to thermal changes (gain_F) + * + * - Spur noise mitigation + * + * - RF/PHY initialization for the various operating modes and bwmodes + * + * - Antenna control + * + * - TX power control per channel/rate/packet type + * + * Also have in mind we never got documentation for most of these + * functions, what we have comes mostly from Atheros's code, reverse + * engineering and patent docs/presentations etc. + */ + + +/******************\ +* Helper functions * +\******************/ + +/** + * ath5k_hw_radio_revision() - Get the PHY Chip revision + * @ah: The &struct ath5k_hw + * @band: One of enum ieee80211_band + * + * Returns the revision number of a 2GHz, 5GHz or single chip + * radio. + */ +u16 +ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) +{ + unsigned int i; + u32 srev; + u16 ret; + + /* + * Set the radio chip access register + */ + switch (band) { + case IEEE80211_BAND_2GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); + break; + case IEEE80211_BAND_5GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + break; + default: + return 0; + } + + usleep_range(2000, 2500); + + /* ...wait until PHY is ready and read the selected radio revision */ + ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); + + for (i = 0; i < 8; i++) + ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); + + if (ah->ah_version == AR5K_AR5210) { + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(256)) >> 28) & 0xf; + ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; + } else { + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; + ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) | + ((srev & 0x0f) << 4), 8); + } + + /* Reset to the 5GHz mode */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + return ret; +} + +/** + * ath5k_channel_ok() - Check if a channel is supported by the hw + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Note: We don't do any regulatory domain checks here, it's just + * a sanity check. */ -static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, - const struct ath5k_rf_reg *rf_regs, +bool +ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel) +{ + u16 freq = channel->center_freq; + + /* Check if the channel is in our supported range */ + if (channel->band == IEEE80211_BAND_2GHZ) { + if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) + return true; + } else if (channel->band == IEEE80211_BAND_5GHZ) + if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) + return true; + + return false; +} + +/** + * ath5k_hw_chan_has_spur_noise() - Check if channel is sensitive to spur noise + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + */ +bool +ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u8 refclk_freq; + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + refclk_freq = 40; + else + refclk_freq = 32; + + if ((channel->center_freq % refclk_freq != 0) && + ((channel->center_freq % refclk_freq < 10) || + (channel->center_freq % refclk_freq > 22))) + return true; + else + return false; +} + +/** + * ath5k_hw_rfb_op() - Perform an operation on the given RF Buffer + * @ah: The &struct ath5k_hw + * @rf_regs: The struct ath5k_rf_reg + * @val: New value + * @reg_id: RF register ID + * @set: Indicate we need to swap data + * + * This is an internal function used to modify RF Banks before + * writing them to AR5K_RF_BUFFER. Check out rfbuffer.h for more + * infos. + */ +static unsigned int +ath5k_hw_rfb_op(struct ath5k_hw *ah, const struct ath5k_rf_reg *rf_regs, u32 val, u8 reg_id, bool set) { const struct ath5k_rf_reg *rfreg = NULL; @@ -84,7 +241,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, data = ath5k_hw_bitswap(val, num_bits); for (bits_shifted = 0, bits_left = num_bits; bits_left > 0; - position = 0, entry++) { + position = 0, entry++) { last_bit = (position + bits_left > 8) ? 8 : position + bits_left; @@ -110,11 +267,132 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, return data; } +/** + * ath5k_hw_write_ofdm_timings() - set OFDM timings on AR5212 + * @ah: the &struct ath5k_hw + * @channel: the currently set channel upon reset + * + * Write the delta slope coefficient (used on pilot tracking ?) for OFDM + * operation on the AR5212 upon reset. This is a helper for ath5k_hw_phy_init. + * + * Since delta slope is floating point we split it on its exponent and + * mantissa and provide these values on hw. + * + * For more infos i think this patent is related + * "http://www.freepatentsonline.com/7184495.html" + */ +static inline int +ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* Get exponent and mantissa and set it */ + u32 coef_scaled, coef_exp, coef_man, + ds_coef_exp, ds_coef_man, clock; + + BUG_ON(!(ah->ah_version == AR5K_AR5212) || + (channel->hw_value == AR5K_MODE_11B)); + + /* Get coefficient + * ALGO: coef = (5 * clock / carrier_freq) / 2 + * we scale coef by shifting clock value by 24 for + * better precision since we use integers */ + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + clock = 40 * 2; + break; + case AR5K_BWMODE_10MHZ: + clock = 40 / 2; + break; + case AR5K_BWMODE_5MHZ: + clock = 40 / 4; + break; + default: + clock = 40; + break; + } + coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq; + + /* Get exponent + * ALGO: coef_exp = 14 - highest set bit position */ + coef_exp = ilog2(coef_scaled); + + /* Doesn't make sense if it's zero*/ + if (!coef_scaled || !coef_exp) + return -EINVAL; + + /* Note: we've shifted coef_scaled by 24 */ + coef_exp = 14 - (coef_exp - 24); + + + /* Get mantissa (significant digits) + * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */ + coef_man = coef_scaled + + (1 << (24 - coef_exp - 1)); + + /* Calculate delta slope coefficient exponent + * and mantissa (remove scaling) and set them on hw */ + ds_coef_man = coef_man >> (24 - coef_exp); + ds_coef_exp = coef_exp - 16; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + + return 0; +} + +/** + * ath5k_hw_phy_disable() - Disable PHY + * @ah: The &struct ath5k_hw + */ +int ath5k_hw_phy_disable(struct ath5k_hw *ah) +{ + /*Just a try M.F.*/ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + + return 0; +} + +/** + * ath5k_hw_wait_for_synth() - Wait for synth to settle + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + */ +static void +ath5k_hw_wait_for_synth(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* + * On 5211+ read activation -> rx delay + * and use it (100ns steps). + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value == AR5K_MODE_11B) ? + ((delay << 2) / 22) : (delay / 10); + if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) + delay = delay << 1; + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) + delay = delay << 2; + /* XXX: /2 on turbo ? Let's be safe + * for now */ + usleep_range(100 + delay, 100 + (2 * delay)); + } else { + usleep_range(1000, 1500); + } +} + + /**********************\ * RF Gain optimization * \**********************/ -/* +/** + * DOC: RF Gain optimization + * * This code is used to optimize RF gain on different environments * (temperature mostly) based on feedback from a power detector. * @@ -123,22 +401,22 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, * no gain optimization ladder-. * * For more infos check out this patent doc - * http://www.freepatentsonline.com/7400691.html + * "http://www.freepatentsonline.com/7400691.html" * * This paper describes power drops as seen on the receiver due to * probe packets - * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues - * %20of%20Power%20Control.pdf + * "http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues + * %20of%20Power%20Control.pdf" * * And this is the MadWiFi bug entry related to the above - * http://madwifi-project.org/ticket/1659 + * "http://madwifi-project.org/ticket/1659" * with various measurements and diagrams - * - * TODO: Deal with power drops due to probes by setting an apropriate - * tx power on the probe packets ! Make this part of the calibration process. */ -/* Initialize ah_gain durring attach */ +/** + * ath5k_hw_rfgain_opt_init() - Initialize ah_gain during attach + * @ah: The &struct ath5k_hw + */ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) { /* Initialize the gain optimization values */ @@ -162,17 +440,21 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) return 0; } -/* Schedule a gain probe check on the next transmited packet. +/** + * ath5k_hw_request_rfgain_probe() - Request a PAPD probe packet + * @ah: The &struct ath5k_hw + * + * Schedules a gain probe check on the next transmitted packet. * That means our next packet is going to be sent with lower * tx power and a Peak to Average Power Detector (PAPD) will try * to measure the gain. * - * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc) + * TODO: Force a tx packet (bypassing PCU arbitrator etc) * just after we enable the probe so that we don't mess with - * standard traffic ? Maybe it's time to use sw interrupts and - * a probe tasklet !!! + * standard traffic. */ -static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) +static void +ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) { /* Skip if gain calibration is inactive or @@ -190,9 +472,15 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) } -/* Calculate gain_F measurement correction - * based on the current step for RF5112 rev. 2 */ -static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) +/** + * ath5k_hw_rf_gainf_corr() - Calculate Gain_F measurement correction + * @ah: The &struct ath5k_hw + * + * Calculate Gain_F measurement correction + * based on the current step for RF5112 rev. 2 + */ +static u32 +ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) { u32 mix, step; u32 *rf; @@ -245,11 +533,19 @@ static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) return ah->ah_gain.g_f_corr; } -/* Check if current gain_F measurement is in the range of our +/** + * ath5k_hw_rf_check_gainf_readback() - Validate Gain_F feedback from detector + * @ah: The &struct ath5k_hw + * + * Check if current gain_F measurement is in the range of our * power detector windows. If we get a measurement outside range * we know it's not accurate (detectors can't measure anything outside - * their detection window) so we must ignore it */ -static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) + * their detection window) so we must ignore it. + * + * Returns true if readback was O.K. or false on failure + */ +static bool +ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) { const struct ath5k_rf_reg *rf_regs; u32 step, mix_ovr, level[4]; @@ -271,7 +567,7 @@ static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) level[0] = 0; level[1] = (step == 63) ? 50 : step + 4; level[2] = (step != 63) ? 64 : level[0]; - level[3] = level[2] + 50 ; + level[3] = level[2] + 50; ah->ah_gain.g_high = level[3] - (step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5); @@ -301,9 +597,15 @@ static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) ah->ah_gain.g_current <= level[3]); } -/* Perform gain_F adjustment by choosing the right set - * of parameters from RF gain optimization ladder */ -static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) +/** + * ath5k_hw_rf_gainf_adjust() - Perform Gain_F adjustment + * @ah: The &struct ath5k_hw + * + * Choose the right target gain based on current gain + * and RF gain optimization ladder + */ +static s8 +ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) { const struct ath5k_gain_opt *go; const struct ath5k_gain_opt_step *g_step; @@ -348,7 +650,7 @@ static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) for (ah->ah_gain.g_target = ah->ah_gain.g_current; ah->ah_gain.g_target <= ah->ah_gain.g_low && - ah->ah_gain.g_step_idx < go->go_steps_count-1; + ah->ah_gain.g_step_idx < go->go_steps_count - 1; g_step = &go->go_step[ah->ah_gain.g_step_idx]) ah->ah_gain.g_target -= 2 * (go->go_step[++ah->ah_gain.g_step_idx].gos_gain - @@ -359,7 +661,7 @@ static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) } done: - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "ret %d, gain step %u, current gain %u, target gain %u\n", ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current, ah->ah_gain.g_target); @@ -367,13 +669,18 @@ done: return ret; } -/* Main callback for thermal RF gain calibration engine +/** + * ath5k_hw_gainf_calibrate() - Do a gain_F calibration + * @ah: The &struct ath5k_hw + * + * Main callback for thermal RF gain calibration engine * Check for a new gain reading and schedule an adjustment * if needed. * - * TODO: Use sw interrupt to schedule reset if gain_F needs - * adjustment */ -enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) + * Returns one of enum ath5k_rfgain codes + */ +enum ath5k_rfgain +ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) { u32 data, type; struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; @@ -413,13 +720,13 @@ enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) ath5k_hw_rf_gainf_corr(ah); ah->ah_gain.g_current = ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ? - (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) : + (ah->ah_gain.g_current - ah->ah_gain.g_f_corr) : 0; } /* Check if measurement is ok and if we need * to adjust gain, schedule a gain adjustment, - * else switch back to the acive state */ + * else switch back to the active state */ if (ath5k_hw_rf_check_gainf_readback(ah) && AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && ath5k_hw_rf_gainf_adjust(ah)) { @@ -433,13 +740,21 @@ done: return ah->ah_gain.g_state; } -/* Write initial RF gain table to set the RF sensitivity - * this one works on all RF chips and has nothing to do - * with gain_F calibration */ -int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) +/** + * ath5k_hw_rfgain_init() - Write initial RF gain settings to hw + * @ah: The &struct ath5k_hw + * @band: One of enum ieee80211_band + * + * Write initial RF gain table to set the RF sensitivity. + * + * NOTE: This one works on all RF chips and has nothing to do + * with Gain_F calibration + */ +static int +ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band) { const struct ath5k_ini_rfgain *ath5k_rfg; - unsigned int i, size; + unsigned int i, size, index; switch (ah->ah_radio) { case AR5K_RF5111: @@ -471,17 +786,11 @@ int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) return -EINVAL; } - switch (freq) { - case AR5K_INI_RFGAIN_2GHZ: - case AR5K_INI_RFGAIN_5GHZ: - break; - default: - return -EINVAL; - } + index = (band == IEEE80211_BAND_2GHZ) ? 1 : 0; for (i = 0; i < size; i++) { AR5K_REG_WAIT(i); - ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq], + ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[index], (u32)ath5k_rfg[i].rfg_register); } @@ -489,17 +798,23 @@ int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) } - /********************\ * RF Registers setup * \********************/ - -/* - * Setup RF registers by writing RF buffer on hw +/** + * ath5k_hw_rfregs_init() - Initialize RF register settings + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @mode: One of enum ath5k_driver_mode + * + * Setup RF registers by writing RF buffer on hw. For + * more infos on this, check out rfbuffer.h */ -int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, - unsigned int mode) +static int +ath5k_hw_rfregs_init(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + unsigned int mode) { const struct ath5k_rf_reg *rf_regs; const struct ath5k_ini_rfbuffer *ini_rfb; @@ -578,7 +893,7 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, ah->ah_rf_banks = kmalloc(sizeof(u32) * ah->ah_rf_banks_size, GFP_KERNEL); if (ah->ah_rf_banks == NULL) { - ATH5K_ERR(ah->ah_sc, "out of memory\n"); + ATH5K_ERR(ah, "out of memory\n"); return -ENOMEM; } } @@ -588,7 +903,7 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, for (i = 0; i < ah->ah_rf_banks_size; i++) { if (ini_rfb[i].rfb_bank >= AR5K_MAX_RF_BANKS) { - ATH5K_ERR(ah->ah_sc, "invalid bank\n"); + ATH5K_ERR(ah, "invalid bank\n"); return -EINVAL; } @@ -602,9 +917,9 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, } /* Set Output and Driver bias current (OB/DB) */ - if (channel->hw_value & CHANNEL_2GHZ) { + if (channel->band == IEEE80211_BAND_2GHZ) { - if (channel->hw_value & CHANNEL_CCK) + if (channel->hw_value == AR5K_MODE_11B) ee_mode = AR5K_EEPROM_MODE_11B; else ee_mode = AR5K_EEPROM_MODE_11G; @@ -613,7 +928,7 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, * use b_OB and b_DB parameters stored * in eeprom on ee->ee_ob[ee_mode][0] * - * For all other chips we use OB/DB for 2Ghz + * For all other chips we use OB/DB for 2GHz * stored in the b/g modal section just like * 802.11a on ee->ee_ob[ee_mode][1] */ if ((ah->ah_radio == AR5K_RF5111) || @@ -629,7 +944,7 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, AR5K_RF_DB_2GHZ, true); /* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */ - } else if ((channel->hw_value & CHANNEL_5GHZ) || + } else if ((channel->band == IEEE80211_BAND_5GHZ) || (ah->ah_radio == AR5K_RF5111)) { /* For 11a, Turbo and XR we need to choose @@ -652,11 +967,16 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, g_step = &go->go_step[ah->ah_gain.g_step_idx]; + /* Set turbo mode (N/A on RF5413) */ + if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) && + (ah->ah_radio != AR5K_RF5413)) + ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_TURBO, false); + /* Bank Modifications (chip-specific) */ if (ah->ah_radio == AR5K_RF5111) { /* Set gain_F settings according to current step */ - if (channel->hw_value & CHANNEL_OFDM) { + if (channel->hw_value != AR5K_MODE_11B) { AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, AR5K_PHY_FRAME_CTL_TX_CLIP, @@ -691,13 +1011,29 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode], AR5K_RF_PLO_SEL, true); - /* TODO: Half/quarter channel support */ + /* Tweak power detectors for half/quarter rate support */ + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ || + ah->ah_bwmode == AR5K_BWMODE_10MHZ) { + u8 wait_i; + + ath5k_hw_rfb_op(ah, rf_regs, 0x1f, + AR5K_RF_WAIT_S, true); + + wait_i = (ah->ah_bwmode == AR5K_BWMODE_5MHZ) ? + 0x1f : 0x10; + + ath5k_hw_rfb_op(ah, rf_regs, wait_i, + AR5K_RF_WAIT_I, true); + ath5k_hw_rfb_op(ah, rf_regs, 3, + AR5K_RF_MAX_TIME, true); + + } } if (ah->ah_radio == AR5K_RF5112) { /* Set gain_F settings according to current step */ - if (channel->hw_value & CHANNEL_OFDM) { + if (channel->hw_value != AR5K_MODE_11B) { ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[0], AR5K_RF_MIXGAIN_OVR, true); @@ -755,17 +1091,20 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, } /* Lower synth voltage on Rev 2 */ - ath5k_hw_rfb_op(ah, rf_regs, 2, - AR5K_RF_HIGH_VC_CP, true); + if (ah->ah_radio == AR5K_RF5112 && + (ah->ah_radio_5ghz_revision & AR5K_SREV_REV) > 0) { + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_HIGH_VC_CP, true); - ath5k_hw_rfb_op(ah, rf_regs, 2, - AR5K_RF_MID_VC_CP, true); + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_MID_VC_CP, true); - ath5k_hw_rfb_op(ah, rf_regs, 2, - AR5K_RF_LOW_VC_CP, true); + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_LOW_VC_CP, true); - ath5k_hw_rfb_op(ah, rf_regs, 2, - AR5K_RF_PUSH_UP, true); + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_PUSH_UP, true); + } /* Decrease power consumption on 5213+ BaseBand */ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { @@ -789,12 +1128,24 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode], AR5K_RF_GAIN_I, true); - /* TODO: Half/quarter channel support */ + /* Tweak power detector for half/quarter rates */ + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ || + ah->ah_bwmode == AR5K_BWMODE_10MHZ) { + u8 pd_delay; + + pd_delay = (ah->ah_bwmode == AR5K_BWMODE_5MHZ) ? + 0xf : 0x8; + + ath5k_hw_rfb_op(ah, rf_regs, pd_delay, + AR5K_RF_PD_PERIOD_A, true); + ath5k_hw_rfb_op(ah, rf_regs, 0xf, + AR5K_RF_PD_DELAY_A, true); + } } if (ah->ah_radio == AR5K_RF5413 && - channel->hw_value & CHANNEL_2GHZ) { + channel->band == IEEE80211_BAND_2GHZ) { ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE, true); @@ -821,37 +1172,18 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, PHY/RF channel functions \**************************/ -/* - * Check if a channel is supported - */ -bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags) -{ - /* Check if the channel is in our supported range */ - if (flags & CHANNEL_2GHZ) { - if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && - (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) - return true; - } else if (flags & CHANNEL_5GHZ) - if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && - (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) - return true; - - return false; -} - -/* - * Convertion needed for RF5110 +/** + * ath5k_hw_rf5110_chan2athchan() - Convert channel freq on RF5110 + * @channel: The &struct ieee80211_channel + * + * Map channel frequency to IEEE channel number and convert it + * to an internal channel value used by the RF5110 chipset. */ -static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) +static u32 +ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) { u32 athchan; - /* - * Convert IEEE channel/MHz to an internal channel value used - * by the AR5210 chipset. This has not been verified with - * newer chipsets like the AR5212A who have a completely - * different RF/PHY part. - */ athchan = (ath5k_hw_bitswap( (ieee80211_frequency_to_channel( channel->center_freq) - 24) / 2, 5) @@ -859,10 +1191,13 @@ static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) return athchan; } -/* - * Set channel on RF5110 +/** + * ath5k_hw_rf5110_channel() - Set channel frequency on RF5110 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel */ -static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, +static int +ath5k_hw_rf5110_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 data; @@ -873,15 +1208,23 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, data = ath5k_hw_rf5110_chan2athchan(channel); ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER); ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0); - mdelay(1); + usleep_range(1000, 1500); return 0; } -/* - * Convertion needed for 5111 +/** + * ath5k_hw_rf5111_chan2athchan() - Handle 2GHz channels on RF5111/2111 + * @ieee: IEEE channel number + * @athchan: The &struct ath5k_athchan_2ghz + * + * In order to enable the RF2111 frequency converter on RF5111/2111 setups + * we need to add some offsets and extra flags to the data values we pass + * on to the PHY. So for every 2GHz channel this function gets called + * to do the conversion. */ -static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, +static int +ath5k_hw_rf5111_chan2athchan(unsigned int ieee, struct ath5k_athchan_2ghz *athchan) { int channel; @@ -907,10 +1250,13 @@ static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, return 0; } -/* - * Set channel on 5111 +/** + * ath5k_hw_rf5111_channel() - Set channel frequency on RF5111/2111 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel */ -static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, +static int +ath5k_hw_rf5111_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { struct ath5k_athchan_2ghz ath5k_channel_2ghz; @@ -924,7 +1270,7 @@ static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, */ data0 = data1 = 0; - if (channel->hw_value & CHANNEL_2GHZ) { + if (channel->band == IEEE80211_BAND_2GHZ) { /* Map 2GHz channel to 5GHz Atheros channel ID */ ret = ath5k_hw_rf5111_chan2athchan( ieee80211_frequency_to_channel(channel->center_freq), @@ -955,10 +1301,20 @@ static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, return 0; } -/* - * Set channel on 5112 and newer +/** + * ath5k_hw_rf5112_channel() - Set channel frequency on 5112 and newer + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * On RF5112/2112 and newer we don't need to do any conversion. + * We pass the frequency value after a few modifications to the + * chip directly. + * + * NOTE: Make sure channel frequency given is within our range or else + * we might damage the chip ! Use ath5k_channel_ok before calling this one. */ -static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, +static int +ath5k_hw_rf5112_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 data, data0, data1, data2; @@ -967,17 +1323,37 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, data = data0 = data1 = data2 = 0; c = channel->center_freq; + /* My guess based on code: + * 2GHz RF has 2 synth modes, one with a Local Oscillator + * at 2224Hz and one with a LO at 2192Hz. IF is 1520Hz + * (3040/2). data0 is used to set the PLL divider and data1 + * selects synth mode. */ if (c < 4800) { + /* Channel 14 and all frequencies with 2Hz spacing + * below/above (non-standard channels) */ if (!((c - 2224) % 5)) { + /* Same as (c - 2224) / 5 */ data0 = ((2 * (c - 704)) - 3040) / 10; data1 = 1; + /* Channel 1 and all frequencies with 5Hz spacing + * below/above (standard channels without channel 14) */ } else if (!((c - 2192) % 5)) { + /* Same as (c - 2192) / 5 */ data0 = ((2 * (c - 672)) - 3040) / 10; data1 = 0; } else return -EINVAL; data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8); + /* This is more complex, we have a single synthesizer with + * 4 reference clock settings (?) based on frequency spacing + * and set using data2. LO is at 4800Hz and data0 is again used + * to set some divider. + * + * NOTE: There is an old atheros presentation at Stanford + * that mentions a method called dual direct conversion + * with 1GHz sliding IF for RF5110. Maybe that's what we + * have here, or an updated version. */ } else if ((c % 5) != 2 || c > 5435) { if (!(c % 20) && c >= 5120) { data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); @@ -1003,10 +1379,16 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, return 0; } -/* - * Set the channel on the RF2425 +/** + * ath5k_hw_rf2425_channel() - Set channel frequency on RF2425 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * AR2425/2417 have a different 2GHz RF so code changes + * a little bit from RF5112. */ -static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, +static int +ath5k_hw_rf2425_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 data, data0, data2; @@ -1042,19 +1424,25 @@ static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, return 0; } -/* - * Set a channel on the radio chip +/** + * ath5k_hw_channel() - Set a channel on the radio chip + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * This is the main function called to set a channel on the + * radio chip based on the radio chip version. */ -int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) +static int +ath5k_hw_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) { int ret; /* - * Check bounds supported by the PHY (we don't care about regultory - * restrictions at this point). Note: hw_value already has the band - * (CHANNEL_2GHZ, or CHANNEL_5GHZ) so we inform ath5k_channel_ok() - * of the band by that */ - if (!ath5k_channel_ok(ah, channel->center_freq, channel->hw_value)) { - ATH5K_ERR(ah->ah_sc, + * Check bounds supported by the PHY (we don't care about regulatory + * restrictions at this point). + */ + if (!ath5k_channel_ok(ah, channel)) { + ATH5K_ERR(ah, "channel frequency (%u MHz) out of supported " "band range\n", channel->center_freq); @@ -1071,6 +1459,7 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) case AR5K_RF5111: ret = ath5k_hw_rf5111_channel(ah, channel); break; + case AR5K_RF2317: case AR5K_RF2425: ret = ath5k_hw_rf2425_channel(ah, channel); break; @@ -1092,17 +1481,50 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) } ah->ah_current_channel = channel; - ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false; - ath5k_hw_set_clockrate(ah); return 0; } + /*****************\ PHY calibration \*****************/ -static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah) +/** + * DOC: PHY Calibration routines + * + * Noise floor calibration: When we tell the hardware to + * perform a noise floor calibration by setting the + * AR5K_PHY_AGCCTL_NF bit on AR5K_PHY_AGCCTL, it will periodically + * sample-and-hold the minimum noise level seen at the antennas. + * This value is then stored in a ring buffer of recently measured + * noise floor values so we have a moving window of the last few + * samples. The median of the values in the history is then loaded + * into the hardware for its own use for RSSI and CCA measurements. + * This type of calibration doesn't interfere with traffic. + * + * AGC calibration: When we tell the hardware to perform + * an AGC (Automatic Gain Control) calibration by setting the + * AR5K_PHY_AGCCTL_CAL, hw disconnects the antennas and does + * a calibration on the DC offsets of ADCs. During this period + * rx/tx gets disabled so we have to deal with it on the driver + * part. + * + * I/Q calibration: When we tell the hardware to perform + * an I/Q calibration, it tries to correct I/Q imbalance and + * fix QAM constellation by sampling data from rxed frames. + * It doesn't interfere with traffic. + * + * For more infos on AGC and I/Q calibration check out patent doc + * #03/094463. + */ + +/** + * ath5k_hw_read_measured_noise_floor() - Read measured NF from hw + * @ah: The &struct ath5k_hw + */ +static s32 +ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah) { s32 val; @@ -1110,7 +1532,12 @@ static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah) return sign_extend32(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 8); } -void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah) +/** + * ath5k_hw_init_nfcal_hist() - Initialize NF calibration history buffer + * @ah: The &struct ath5k_hw + */ +void +ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah) { int i; @@ -1119,14 +1546,24 @@ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah) ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE; } +/** + * ath5k_hw_update_nfcal_hist() - Update NF calibration history buffer + * @ah: The &struct ath5k_hw + * @noise_floor: The NF we got from hw + */ static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor) { struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist; - hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX-1); + hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX - 1); hist->nfval[hist->index] = noise_floor; } -static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) +/** + * ath5k_hw_get_median_noise_floor() - Get median NF from history buffer + * @ah: The &struct ath5k_hw + */ +static s16 +ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) { s16 sort[ATH5K_NF_CAL_HIST_MAX]; s16 tmp; @@ -1135,32 +1572,30 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort)); for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) { for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) { - if (sort[j] > sort[j-1]) { + if (sort[j] > sort[j - 1]) { tmp = sort[j]; - sort[j] = sort[j-1]; - sort[j-1] = tmp; + sort[j] = sort[j - 1]; + sort[j - 1] = tmp; } } } for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++) { - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "cal %d:%d\n", i, sort[i]); } - return sort[(ATH5K_NF_CAL_HIST_MAX-1) / 2]; + return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2]; } -/* - * When we tell the hardware to perform a noise floor calibration - * by setting the AR5K_PHY_AGCCTL_NF bit, it will periodically - * sample-and-hold the minimum noise level seen at the antennas. - * This value is then stored in a ring buffer of recently measured - * noise floor values so we have a moving window of the last few - * samples. +/** + * ath5k_hw_update_noise_floor() - Update NF on hardware + * @ah: The &struct ath5k_hw * - * The median of the values in the history is then loaded into the - * hardware for its own use for RSSI and CCA measurements. + * This is the main function we call to perform a NF calibration, + * it reads NF from hardware, calculates the median and updates + * NF on hw. */ -void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) +void +ath5k_hw_update_noise_floor(struct ath5k_hw *ah) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 val; @@ -1169,35 +1604,22 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) /* keep last value if calibration hasn't completed */ if (ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL) & AR5K_PHY_AGCCTL_NF) { - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "NF did not complete in calibration window\n"); return; } - switch (ah->ah_current_channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_T: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - case CHANNEL_TG: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - default: - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - } + ah->ah_cal_mask |= AR5K_CALIBRATION_NF; + ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel); /* completed NF calibration, test threshold */ nf = ath5k_hw_read_measured_noise_floor(ah); threshold = ee->ee_noise_floor_thr[ee_mode]; if (nf > threshold) { - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "noise floor failure detected; " "read %d, threshold %d\n", nf, threshold); @@ -1234,20 +1656,29 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) ah->ah_noise_floor = nf; - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF; + + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "noise floor calibrated: %d\n", nf); } -/* - * Perform a PHY calibration on RF5110 - * -Fix BPSK/QAM Constellation (I/Q correction) +/** + * ath5k_hw_rf5110_calibrate() - Perform a PHY calibration on RF5110 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Do a complete PHY calibration (AGC + NF + I/Q) on RF5110 */ -static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, +static int +ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 phy_sig, phy_agc, phy_sat, beacon; int ret; + if (!(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) + return 0; + /* * Disable beacons and RX/TX queues, wait */ @@ -1256,7 +1687,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210); ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210); - mdelay(2); + usleep_range(2000, 2500); /* * Set the channel (with AGC turned off) @@ -1269,7 +1700,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, * Activate PHY and wait */ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - mdelay(1); + usleep_range(1000, 1500); AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); @@ -1306,7 +1737,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG); AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); - mdelay(1); + usleep_range(1000, 1500); /* * Enable calibration and wait until completion @@ -1322,7 +1753,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT); if (ret) { - ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", + ATH5K_ERR(ah, "calibration timeout (%uMHz)\n", channel->center_freq); return ret; } @@ -1337,8 +1768,9 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, return 0; } -/* - * Perform I/Q calibration on RF5111/5112 and newer chips +/** + * ath5k_hw_rf511x_iq_calibrate() - Perform I/Q calibration on RF5111 and newer + * @ah: The &struct ath5k_hw */ static int ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) @@ -1347,17 +1779,24 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; int i; - if (!ah->ah_calibration || - ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) - return 0; + /* Skip if I/Q calibration is not needed or if it's still running */ + if (!ah->ah_iq_cal_needed) + return -EINVAL; + else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, + "I/Q calibration still running"); + return -EBUSY; + } /* Calibration has finished, get the results and re-run */ - /* work around empty results which can apparently happen on 5212 */ + + /* Work around for empty results which can apparently happen on 5212: + * Read registers up to 10 times until we get both i_pr and q_pwr */ for (i = 0; i <= 10; i++) { iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, "iq_corr:%x i_pwr:%x q_pwr:%x", iq_corr, i_pwr, q_pwr); if (i_pwr && q_pwr) break; @@ -1370,9 +1809,13 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) else q_coffd = q_pwr >> 7; - /* protect against divide by 0 and loss of sign bits */ + /* In case i_coffd became zero, cancel calibration + * not only it's too small, it'll also result a divide + * by zero later on. */ if (i_coffd == 0 || q_coffd < 2) - return 0; + return -ECANCELED; + + /* Protect against loss of sign bits */ i_coff = (-iq_corr) / i_coffd; i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */ @@ -1383,7 +1826,7 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) q_coff = (i_pwr / q_coffd) - 128; q_coff = clamp(q_coff, -16, 15); /* signed 5 bit */ - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, "new I:%d Q:%d (i_coffd:%x q_coffd:%x)", i_coff, q_coff, i_coffd, q_coffd); @@ -1401,49 +1844,66 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) return 0; } -/* - * Perform a PHY calibration +/** + * ath5k_hw_phy_calibrate() - Perform a PHY calibration + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * The main function we call from above to perform + * a short or full PHY calibration based on RF chip + * and current channel */ -int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, +int +ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel) { int ret; if (ah->ah_radio == AR5K_RF5110) - ret = ath5k_hw_rf5110_calibrate(ah, channel); - else { - ret = ath5k_hw_rf511x_iq_calibrate(ah); - ath5k_hw_request_rfgain_probe(ah); + return ath5k_hw_rf5110_calibrate(ah, channel); + + ret = ath5k_hw_rf511x_iq_calibrate(ah); + if (ret) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, + "No I/Q correction performed (%uMHz)\n", + channel->center_freq); + + /* Happens all the time if there is not much + * traffic, consider it normal behaviour. */ + ret = 0; } + /* On full calibration request a PAPD probe for + * gainf calibration if needed */ + if ((ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + (ah->ah_radio == AR5K_RF5111 || + ah->ah_radio == AR5K_RF5112) && + channel->hw_value != AR5K_MODE_11B) + ath5k_hw_request_rfgain_probe(ah); + + /* Update noise floor */ + if (!(ah->ah_cal_mask & AR5K_CALIBRATION_NF)) + ath5k_hw_update_noise_floor(ah); + return ret; } + /***************************\ * Spur mitigation functions * \***************************/ -bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - u8 refclk_freq; - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) - refclk_freq = 40; - else - refclk_freq = 32; - - if ((channel->center_freq % refclk_freq != 0) && - ((channel->center_freq % refclk_freq < 10) || - (channel->center_freq % refclk_freq > 22))) - return true; - else - return false; -} - -void +/** + * ath5k_hw_set_spur_mitigation_filter() - Configure SPUR filter + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * This function gets called during PHY initialization to + * configure the spur filter for the given channel. Spur is noise + * generated due to "reflection" effects, for more information on this + * method check out patent US7643810 + */ +static void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, struct ieee80211_channel *channel) { @@ -1459,7 +1919,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, /* Convert current frequency to fbin value (the same way channels * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale * up by 2 so we can compare it later */ - if (channel->hw_value & CHANNEL_2GHZ) { + if (channel->band == IEEE80211_BAND_2GHZ) { chan_fbin = (channel->center_freq - 2300) * 10; freq_band = AR5K_EEPROM_BAND_2GHZ; } else { @@ -1472,7 +1932,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, spur_chan_fbin = AR5K_EEPROM_NO_SPUR; spur_detection_window = AR5K_SPUR_CHAN_WIDTH; /* XXX: Half/Quarter channels ?*/ - if (channel->hw_value & CHANNEL_TURBO) + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) spur_detection_window *= 2; for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) { @@ -1501,32 +1961,45 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, * Calculate deltas: * spur_freq_sigma_delta -> spur_offset / sample_freq << 21 * spur_delta_phase -> spur_offset / chip_freq << 11 - * Note: Both values have 100KHz resolution + * Note: Both values have 100Hz resolution */ - /* XXX: Half/Quarter rate channels ? */ - switch (channel->hw_value) { - case CHANNEL_A: - /* Both sample_freq and chip_freq are 40MHz */ - spur_delta_phase = (spur_offset << 17) / 25; + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + /* Both sample_freq and chip_freq are 80MHz */ + spur_delta_phase = (spur_offset << 16) / 25; spur_freq_sigma_delta = (spur_delta_phase >> 10); - symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz; + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz * 2; break; - case CHANNEL_G: - /* sample_freq -> 40MHz chip_freq -> 44MHz - * (for b compatibility) */ - spur_freq_sigma_delta = (spur_offset << 8) / 55; - spur_delta_phase = (spur_offset << 17) / 25; - symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz; + case AR5K_BWMODE_10MHZ: + /* Both sample_freq and chip_freq are 20MHz (?) */ + spur_delta_phase = (spur_offset << 18) / 25; + spur_freq_sigma_delta = (spur_delta_phase >> 10); + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 2; break; - case CHANNEL_T: - case CHANNEL_TG: - /* Both sample_freq and chip_freq are 80MHz */ - spur_delta_phase = (spur_offset << 16) / 25; + case AR5K_BWMODE_5MHZ: + /* Both sample_freq and chip_freq are 10MHz (?) */ + spur_delta_phase = (spur_offset << 19) / 25; spur_freq_sigma_delta = (spur_delta_phase >> 10); - symbol_width = AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz; + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 4; break; default: - return; + if (channel->band == IEEE80211_BAND_5GHZ) { + /* Both sample_freq and chip_freq are 40MHz */ + spur_delta_phase = (spur_offset << 17) / 25; + spur_freq_sigma_delta = + (spur_delta_phase >> 10); + symbol_width = + AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz; + } else { + /* sample_freq -> 40MHz chip_freq -> 44MHz + * (for b compatibility) */ + spur_delta_phase = (spur_offset << 17) / 25; + spur_freq_sigma_delta = + (spur_offset << 8) / 55; + symbol_width = + AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz; + } + break; } /* Calculate pilot and magnitude masks */ @@ -1629,7 +2102,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, } else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_SPUR_FILT_EN) { - /* Clean up spur mitigation settings and disable fliter */ + /* Clean up spur mitigation settings and disable filter */ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, AR5K_PHY_BIN_MASK_CTL_RATE, 0); AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ, @@ -1666,77 +2139,78 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, } } -/********************\ - Misc PHY functions -\********************/ - -int ath5k_hw_phy_disable(struct ath5k_hw *ah) -{ - /*Just a try M.F.*/ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - - return 0; -} - -/* - * Get the PHY Chip revision - */ -u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan) -{ - unsigned int i; - u32 srev; - u16 ret; - - /* - * Set the radio chip access register - */ - switch (chan) { - case CHANNEL_2GHZ: - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); - break; - case CHANNEL_5GHZ: - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - break; - default: - return 0; - } - - mdelay(2); - - /* ...wait until PHY is ready and read the selected radio revision */ - ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); - - for (i = 0; i < 8; i++) - ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); - - if (ah->ah_version == AR5K_AR5210) { - srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf; - ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; - } else { - srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; - ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) | - ((srev & 0x0f) << 4), 8); - } - - /* Reset to the 5GHz mode */ - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - - return ret; -} /*****************\ * Antenna control * \*****************/ -static void /*TODO:Boundary check*/ +/** + * DOC: Antenna control + * + * Hw supports up to 14 antennas ! I haven't found any card that implements + * that. The maximum number of antennas I've seen is up to 4 (2 for 2GHz and 2 + * for 5GHz). Antenna 1 (MAIN) should be omnidirectional, 2 (AUX) + * omnidirectional or sectorial and antennas 3-14 sectorial (or directional). + * + * We can have a single antenna for RX and multiple antennas for TX. + * RX antenna is our "default" antenna (usually antenna 1) set on + * DEFAULT_ANTENNA register and TX antenna is set on each TX control descriptor + * (0 for automatic selection, 1 - 14 antenna number). + * + * We can let hw do all the work doing fast antenna diversity for both + * tx and rx or we can do things manually. Here are the options we have + * (all are bits of STA_ID1 register): + * + * AR5K_STA_ID1_DEFAULT_ANTENNA -> When 0 is set as the TX antenna on TX + * control descriptor, use the default antenna to transmit or else use the last + * antenna on which we received an ACK. + * + * AR5K_STA_ID1_DESC_ANTENNA -> Update default antenna after each TX frame to + * the antenna on which we got the ACK for that frame. + * + * AR5K_STA_ID1_RTS_DEF_ANTENNA -> Use default antenna for RTS or else use the + * one on the TX descriptor. + * + * AR5K_STA_ID1_SELFGEN_DEF_ANT -> Use default antenna for self generated frames + * (ACKs etc), or else use current antenna (the one we just used for TX). + * + * Using the above we support the following scenarios: + * + * AR5K_ANTMODE_DEFAULT -> Hw handles antenna diversity etc automatically + * + * AR5K_ANTMODE_FIXED_A -> Only antenna A (MAIN) is present + * + * AR5K_ANTMODE_FIXED_B -> Only antenna B (AUX) is present + * + * AR5K_ANTMODE_SINGLE_AP -> Sta locked on a single ap + * + * AR5K_ANTMODE_SECTOR_AP -> AP with tx antenna set on tx desc + * + * AR5K_ANTMODE_SECTOR_STA -> STA with tx antenna set on tx desc + * + * AR5K_ANTMODE_DEBUG Debug mode -A -> Rx, B-> Tx- + * + * Also note that when setting antenna to F on tx descriptor card inverts + * current tx antenna. + */ + +/** + * ath5k_hw_set_def_antenna() - Set default rx antenna on AR5211/5212 and newer + * @ah: The &struct ath5k_hw + * @ant: Antenna number + */ +static void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant) { if (ah->ah_version != AR5K_AR5210) ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA); } -/* - * Enable/disable fast rx antenna diversity +/** + * ath5k_hw_set_fast_div() - Enable/disable fast rx antenna diversity + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * @enable: True to enable, false to disable */ static void ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable) @@ -1776,6 +2250,14 @@ ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable) } } +/** + * ath5k_hw_set_antenna_switch() - Set up antenna switch table + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * + * Switch table comes from EEPROM and includes information on controlling + * the 2 antenna RX attenuators + */ void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode) { @@ -1807,8 +2289,10 @@ ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode) AR5K_PHY_ANT_SWITCH_TABLE_1); } -/* - * Set antenna operating mode +/** + * ath5k_hw_set_antenna_mode() - Set antenna operating mode + * @ah: The &struct ath5k_hw + * @ant_mode: One of enum ath5k_ant_mode */ void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) @@ -1816,7 +2300,8 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) struct ieee80211_channel *channel = ah->ah_current_channel; bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div; bool use_def_for_sg; - u8 def_ant, tx_ant, ee_mode; + int ee_mode; + u8 def_ant, tx_ant; u32 sta_id1 = 0; /* if channel is not initialized yet we can't set the antennas @@ -1828,24 +2313,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) def_ant = ah->ah_def_ant; - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_T: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - case CHANNEL_TG: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); - return; - } + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); switch (ant_mode) { case AR5K_ANTMODE_DEFAULT: @@ -1942,8 +2410,13 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) * Helper functions */ -/* - * Do linear interpolation between two given (x, y) points +/** + * ath5k_get_interpolated_value() - Get interpolated Y val between two points + * @target: X value of the middle point + * @x_left: X value of the left point + * @x_right: X value of the right point + * @y_left: Y value of the left point + * @y_right: Y value of the right point */ static s16 ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, @@ -1962,7 +2435,7 @@ ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, * always 1 instead of 1.25, 1.75 etc). We scale up by 100 * to have some accuracy both for 0.5 and 0.25 steps. */ - ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left)); + ratio = ((100 * y_right - 100 * y_left) / (x_right - x_left)); /* Now scale down to be in range */ result = y_left + (ratio * (target - x_left) / 100); @@ -1970,13 +2443,18 @@ ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, return result; } -/* - * Find vertical boundary (min pwr) for the linear PCDAC curve. +/** + * ath5k_get_linear_pcdac_min() - Find vertical boundary (min pwr) for the + * linear PCDAC curve + * @stepL: Left array with y values (pcdac steps) + * @stepR: Right array with y values (pcdac steps) + * @pwrL: Left array with x values (power steps) + * @pwrR: Right array with x values (power steps) * * Since we have the top of the curve and we draw the line below * until we reach 1 (1 pcdac step) we need to know which point - * (x value) that is so that we don't go below y axis and have negative - * pcdac values when creating the curve, or fill the table with zeroes. + * (x value) that is so that we don't go below x axis and have negative + * pcdac values when creating the curve, or fill the table with zeros. */ static s16 ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, @@ -2022,7 +2500,16 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, return max(min_pwrL, min_pwrR); } -/* +/** + * ath5k_create_power_curve() - Create a Power to PDADC or PCDAC curve + * @pmin: Minimum power value (xmin) + * @pmax: Maximum power value (xmax) + * @pwr: Array of power steps (x values) + * @vpd: Array of matching PCDAC/PDADC steps (y values) + * @num_points: Number of provided points + * @vpd_table: Array to fill with the full PCDAC/PDADC values (y values) + * @type: One of enum ath5k_powertable_type (eeprom.h) + * * Interpolate (pwr,vpd) points to create a Power to PDADC or a * Power to PCDAC curve. * @@ -2041,7 +2528,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax, u8 *vpd_table, u8 type) { u8 idx[2] = { 0, 1 }; - s16 pwr_i = 2*pmin; + s16 pwr_i = 2 * pmin; int i; if (num_points < 2) @@ -2080,10 +2567,17 @@ ath5k_create_power_curve(s16 pmin, s16 pmax, } } -/* +/** + * ath5k_get_chan_pcal_surrounding_piers() - Get surrounding calibration piers + * for a given channel. + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @pcinfo_l: The &struct ath5k_chan_pcal_info to put the left cal. pier + * @pcinfo_r: The &struct ath5k_chan_pcal_info to put the right cal. pier + * * Get the surrounding per-channel power calibration piers * for a given frequency so that we can interpolate between - * them and come up with an apropriate dataset for our current + * them and come up with an appropriate dataset for our current * channel. */ static void @@ -2101,15 +2595,20 @@ ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah, idx_l = 0; idx_r = 0; - if (!(channel->hw_value & CHANNEL_OFDM)) { + switch (channel->hw_value) { + case AR5K_EEPROM_MODE_11A: + pcinfo = ee->ee_pwr_cal_a; + mode = AR5K_EEPROM_MODE_11A; + break; + case AR5K_EEPROM_MODE_11B: pcinfo = ee->ee_pwr_cal_b; mode = AR5K_EEPROM_MODE_11B; - } else if (channel->hw_value & CHANNEL_2GHZ) { + break; + case AR5K_EEPROM_MODE_11G: + default: pcinfo = ee->ee_pwr_cal_g; mode = AR5K_EEPROM_MODE_11G; - } else { - pcinfo = ee->ee_pwr_cal_a; - mode = AR5K_EEPROM_MODE_11A; + break; } max = ee->ee_n_piers[mode] - 1; @@ -2158,11 +2657,17 @@ done: *pcinfo_r = &pcinfo[idx_r]; } -/* +/** + * ath5k_get_rate_pcal_data() - Get the interpolated per-rate power + * calibration data + * @ah: The &struct ath5k_hw *ah, + * @channel: The &struct ieee80211_channel + * @rates: The &struct ath5k_rate_pcal_info to fill + * * Get the surrounding per-rate power calibration data * for a given frequency and interpolate between power * values to set max target power supported by hw for - * each rate. + * each rate on this frequency. */ static void ath5k_get_rate_pcal_data(struct ath5k_hw *ah, @@ -2178,15 +2683,20 @@ ath5k_get_rate_pcal_data(struct ath5k_hw *ah, idx_l = 0; idx_r = 0; - if (!(channel->hw_value & CHANNEL_OFDM)) { + switch (channel->hw_value) { + case AR5K_MODE_11A: + rpinfo = ee->ee_rate_tpwr_a; + mode = AR5K_EEPROM_MODE_11A; + break; + case AR5K_MODE_11B: rpinfo = ee->ee_rate_tpwr_b; mode = AR5K_EEPROM_MODE_11B; - } else if (channel->hw_value & CHANNEL_2GHZ) { + break; + case AR5K_MODE_11G: + default: rpinfo = ee->ee_rate_tpwr_g; mode = AR5K_EEPROM_MODE_11G; - } else { - rpinfo = ee->ee_rate_tpwr_a; - mode = AR5K_EEPROM_MODE_11A; + break; } max = ee->ee_rate_target_pwr_num[mode] - 1; @@ -2245,7 +2755,11 @@ done: rpinfo[idx_r].target_power_54); } -/* +/** + * ath5k_get_max_ctl_power() - Get max edge power for a given frequency + * @ah: the &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * * Get the max edge power for this channel if * we have such data from EEPROM's Conformance Test * Limits (CTL), and limit max power if needed. @@ -2267,24 +2781,22 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah, ctl_mode = ath_regd_get_band_ctl(regulatory, channel->band); - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - ctl_mode |= AR5K_CTL_11A; + switch (channel->hw_value) { + case AR5K_MODE_11A: + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + ctl_mode |= AR5K_CTL_TURBO; + else + ctl_mode |= AR5K_CTL_11A; break; - case CHANNEL_G: - ctl_mode |= AR5K_CTL_11G; + case AR5K_MODE_11G: + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + ctl_mode |= AR5K_CTL_TURBOG; + else + ctl_mode |= AR5K_CTL_11G; break; - case CHANNEL_B: + case AR5K_MODE_11B: ctl_mode |= AR5K_CTL_11B; break; - case CHANNEL_T: - ctl_mode |= AR5K_CTL_TURBO; - break; - case CHANNEL_TG: - ctl_mode |= AR5K_CTL_TURBOG; - break; - case CHANNEL_XR: - /* Fall through */ default: return; } @@ -2319,7 +2831,7 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah, } if (edge_pwr) - ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr); + ah->ah_txpower.txp_max_pwr = 4 * min(edge_pwr, max_chan_pwr); } @@ -2327,8 +2839,39 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah, * Power to PCDAC table functions */ -/* - * Fill Power to PCDAC table on RF5111 +/** + * DOC: Power to PCDAC table functions + * + * For RF5111 we have an XPD -eXternal Power Detector- curve + * for each calibrated channel. Each curve has 0,5dB Power steps + * on x axis and PCDAC steps (offsets) on y axis and looks like an + * exponential function. To recreate the curve we read 11 points + * from eeprom (eeprom.c) and interpolate here. + * + * For RF5112 we have 4 XPD -eXternal Power Detector- curves + * for each calibrated channel on 0, -6, -12 and -18dBm but we only + * use the higher (3) and the lower (0) curves. Each curve again has 0.5dB + * power steps on x axis and PCDAC steps on y axis and looks like a + * linear function. To recreate the curve and pass the power values + * on hw, we get 4 points for xpd 0 (lower gain -> max power) + * and 3 points for xpd 3 (higher gain -> lower power) from eeprom (eeprom.c) + * and interpolate here. + * + * For a given channel we get the calibrated points (piers) for it or + * -if we don't have calibration data for this specific channel- from the + * available surrounding channels we have calibration data for, after we do a + * linear interpolation between them. Then since we have our calibrated points + * for this channel, we do again a linear interpolation between them to get the + * whole curve. + * + * We finally write the Y values of the curve(s) (the PCDAC values) on hw + */ + +/** + * ath5k_fill_pwr_to_pcdac_table() - Fill Power to PCDAC table on RF5111 + * @ah: The &struct ath5k_hw + * @table_min: Minimum power (x min) + * @table_max: Maximum power (x max) * * No further processing is needed for RF5111, the only thing we have to * do is fill the values below and above calibration range since eeprom data @@ -2338,7 +2881,7 @@ static void ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, s16 *table_max) { - u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; u8 *pcdac_tmp = ah->ah_txpower.tmpL[0]; u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i; s16 min_pwr, max_pwr; @@ -2357,8 +2900,8 @@ ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, /* Copy values from pcdac_tmp */ pwr_idx = min_pwr; - for (i = 0 ; pwr_idx <= max_pwr && - pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) { + for (i = 0; pwr_idx <= max_pwr && + pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) { pcdac_out[pcdac_i++] = pcdac_tmp[i]; pwr_idx++; } @@ -2369,10 +2912,14 @@ ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, } -/* - * Combine available XPD Curves and fill Linear Power to PCDAC table - * on RF5112 +/** + * ath5k_combine_linear_pcdac_curves() - Combine available PCDAC Curves + * @ah: The &struct ath5k_hw + * @table_min: Minimum power (x min) + * @table_max: Maximum power (x max) + * @pdcurves: Number of pd curves * + * Combine available XPD Curves and fill Linear Power to PCDAC table on RF5112 * RFX112 can have up to 2 curves (one for low txpower range and one for * higher txpower range). We need to put them both on pcdac_out and place * them in the correct location. In case we only have one curve available @@ -2384,7 +2931,7 @@ static void ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, s16 *table_max, u8 pdcurves) { - u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; u8 *pcdac_low_pwr; u8 *pcdac_high_pwr; u8 *pcdac_tmp; @@ -2392,8 +2939,8 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, s16 max_pwr_idx; s16 min_pwr_idx; s16 mid_pwr_idx = 0; - /* Edge flag turs on the 7nth bit on the PCDAC - * to delcare the higher power curve (force values + /* Edge flag turns on the 7nth bit on the PCDAC + * to declare the higher power curve (force values * to be greater than 64). If we only have one curve * we don't need to set this, if we have 2 curves and * fill the table backwards this can also be used to @@ -2434,7 +2981,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, } /* This is used when setting tx power*/ - ah->ah_txpower.txp_min_idx = min_pwr_idx/2; + ah->ah_txpower.txp_min_idx = min_pwr_idx / 2; /* Fill Power to PCDAC table backwards */ pwr = max_pwr_idx; @@ -2443,14 +2990,14 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, * edge flag and set pcdac_tmp to lower * power curve.*/ if (edge_flag == 0x40 && - (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) { + (2 * pwr <= (table_max[1] - table_min[0]) || pwr == 0)) { edge_flag = 0x00; pcdac_tmp = pcdac_low_pwr; - pwr = mid_pwr_idx/2; + pwr = mid_pwr_idx / 2; } /* Don't go below 1, extrapolate below if we have - * already swithced to the lower power curve -or + * already switched to the lower power curve -or * we only have one curve and edge_flag is zero * anyway */ if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) { @@ -2474,11 +3021,14 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, } } -/* Write PCDAC values on hw */ +/** + * ath5k_write_pcdac_table() - Write the PCDAC values on hw + * @ah: The &struct ath5k_hw + */ static void -ath5k_setup_pcdac_table(struct ath5k_hw *ah) +ath5k_write_pcdac_table(struct ath5k_hw *ah) { - u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; int i; /* @@ -2486,8 +3036,8 @@ ath5k_setup_pcdac_table(struct ath5k_hw *ah) */ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { ath5k_hw_reg_write(ah, - (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) | - (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16), + (((pcdac_out[2 * i + 0] << 8 | 0xff) & 0xffff) << 0) | + (((pcdac_out[2 * i + 1] << 8 | 0xff) & 0xffff) << 16), AR5K_PHY_PCDAC_TXPOWER(i)); } } @@ -2497,10 +3047,33 @@ ath5k_setup_pcdac_table(struct ath5k_hw *ah) * Power to PDADC table functions */ -/* - * Set the gain boundaries and create final Power to PDADC table +/** + * DOC: Power to PDADC table functions + * + * For RF2413 and later we have a Power to PDADC table (Power Detector) + * instead of a PCDAC (Power Control) and 4 pd gain curves for each + * calibrated channel. Each curve has power on x axis in 0.5 db steps and + * PDADC steps on y axis and looks like an exponential function like the + * RF5111 curve. + * + * To recreate the curves we read the points from eeprom (eeprom.c) + * and interpolate here. Note that in most cases only 2 (higher and lower) + * curves are used (like RF5112) but vendors have the opportunity to include + * all 4 curves on eeprom. The final curve (higher power) has an extra + * point for better accuracy like RF5112. * - * We can have up to 4 pd curves, we need to do a simmilar process + * The process is similar to what we do above for RF5111/5112 + */ + +/** + * ath5k_combine_pwr_to_pdadc_curves() - Combine the various PDADC curves + * @ah: The &struct ath5k_hw + * @pwr_min: Minimum power (x min) + * @pwr_max: Maximum power (x max) + * @pdcurves: Number of available curves + * + * Combine the various pd curves and create the final Power to PDADC table + * We can have up to 4 pd curves, we need to do a similar process * as we do for RF5112. This time we don't have an edge_flag but we * set the gain boundaries on a separate register. */ @@ -2623,12 +3196,18 @@ ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah, } -/* Write PDADC values on hw */ +/** + * ath5k_write_pwr_to_pdadc_table() - Write the PDADC values on hw + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + */ static void -ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah, - u8 pdcurves, u8 *pdg_to_idx) +ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) { + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u8 *pdg_to_idx = ee->ee_pdc_to_idx[ee_mode]; + u8 pdcurves = ee->ee_pd_gains[ee_mode]; u32 reg; u8 i; @@ -2668,12 +3247,8 @@ ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah, * Write TX power values */ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { - ath5k_hw_reg_write(ah, - ((pdadc_out[4*i + 0] & 0xff) << 0) | - ((pdadc_out[4*i + 1] & 0xff) << 8) | - ((pdadc_out[4*i + 2] & 0xff) << 16) | - ((pdadc_out[4*i + 3] & 0xff) << 24), - AR5K_PHY_PDADC_TXPOWER(i)); + u32 val = get_unaligned_le32(&pdadc_out[4 * i]); + ath5k_hw_reg_write(ah, val, AR5K_PHY_PDADC_TXPOWER(i)); } } @@ -2682,10 +3257,16 @@ ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah, * Common code for PCDAC/PDADC tables */ -/* +/** + * ath5k_setup_channel_powertable() - Set up power table for this channel + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @ee_mode: One of enum ath5k_driver_mode + * @type: One of enum ath5k_powertable_type (eeprom.h) + * * This is the main function that uses all of the above * to set PCDAC/PDADC table on hw for the current channel. - * This table is used for tx power calibration on the basband, + * This table is used for tx power calibration on the baseband, * without it we get weird tx power levels and in some cases * distorted spectral mask */ @@ -2706,13 +3287,13 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, u32 target = channel->center_freq; int pdg, i; - /* Get surounding freq piers for this channel */ + /* Get surrounding freq piers for this channel */ ath5k_get_chan_pcal_surrounding_piers(ah, channel, &pcinfo_L, &pcinfo_R); /* Loop over pd gain curves on - * surounding freq piers by index */ + * surrounding freq piers by index */ for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) { /* Fill curves in reverse order @@ -2803,7 +3384,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, } /* Interpolate between curves - * of surounding freq piers to + * of surrounding freq piers to * get the final curve for this * pd gain. Re-use tmpL for interpolation * output */ @@ -2827,7 +3408,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* Fill min and max power levels for this * channel by interpolating the values on - * surounding channels to complete the dataset */ + * surrounding channels to complete the dataset */ ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target, (s16) pcinfo_L->freq, (s16) pcinfo_R->freq, @@ -2838,8 +3419,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, (s16) pcinfo_R->freq, pcinfo_L->max_pwr, pcinfo_R->max_pwr); - /* We are ready to go, fill PCDAC/PDADC - * table and write settings on hardware */ + /* Fill PCDAC/PDADC table */ switch (type) { case AR5K_PWRTABLE_LINEAR_PCDAC: /* For RF5112 we can have one or two curves @@ -2852,9 +3432,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, * match max power value with max * table index */ ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2); - - /* Write settings on hw */ - ath5k_setup_pcdac_table(ah); break; case AR5K_PWRTABLE_PWR_TO_PCDAC: /* We are done for RF5111 since it has only @@ -2864,9 +3441,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* No rate powertable adjustment for RF5111 */ ah->ah_txpower.txp_min_idx = 0; ah->ah_txpower.txp_offset = 0; - - /* Write settings on hw */ - ath5k_setup_pcdac_table(ah); break; case AR5K_PWRTABLE_PWR_TO_PDADC: /* Set PDADC boundaries and fill @@ -2874,9 +3448,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max, ee->ee_pd_gains[ee_mode]); - /* Write settings on hw */ - ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx); - /* Set txp.offset, note that table_min * can be negative */ ah->ah_txpower.txp_offset = table_min[0]; @@ -2885,32 +3456,56 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, return -EINVAL; } + ah->ah_txpower.txp_setup = true; + return 0; } +/** + * ath5k_write_channel_powertable() - Set power table for current channel on hw + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * @type: One of enum ath5k_powertable_type (eeprom.h) + */ +static void +ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type) +{ + if (type == AR5K_PWRTABLE_PWR_TO_PDADC) + ath5k_write_pwr_to_pdadc_table(ah, ee_mode); + else + ath5k_write_pcdac_table(ah); +} + -/* - * Per-rate tx power setting +/** + * DOC: Per-rate tx power setting * - * This is the code that sets the desired tx power (below + * This is the code that sets the desired tx power limit (below * maximum) on hw for each rate (we also have TPC that sets - * power per packet). We do that by providing an index on the - * PCDAC/PDADC table we set up. - */ - -/* - * Set rate power table + * power per packet type). We do that by providing an index on the + * PCDAC/PDADC table we set up above, for each rate. * * For now we only limit txpower based on maximum tx power - * supported by hw (what's inside rate_info). We need to limit - * this even more, based on regulatory domain etc. + * supported by hw (what's inside rate_info) + conformance test + * limits. We need to limit this even more, based on regulatory domain + * etc to be safe. Normally this is done from above so we don't care + * here, all we care is that the tx power we set will be O.K. + * for the hw (e.g. won't create noise on PA etc). * - * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps) - * and is indexed as follows: + * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps - + * x values) and is indexed as follows: * rates[0] - rates[7] -> OFDM rates * rates[8] - rates[14] -> CCK rates * rates[15] -> XR rates (they all have the same power) */ + +/** + * ath5k_setup_rate_powertable() - Set up rate power table for a given tx power + * @ah: The &struct ath5k_hw + * @max_pwr: The maximum tx power requested in 0.5dB steps + * @rate_info: The &struct ath5k_rate_pcal_info to fill + * @ee_mode: One of enum ath5k_driver_mode + */ static void ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, struct ath5k_rate_pcal_info *rate_info, @@ -2918,6 +3513,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, { unsigned int i; u16 *rates; + s16 rate_idx_scaled = 0; /* max_pwr is power level we got from driver/user in 0.5dB * units, switch to 0.25dB units so we can compare */ @@ -2964,47 +3560,66 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, for (i = 8; i <= 15; i++) rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + /* Save min/max and current tx power for this channel + * in 0.25dB units. + * + * Note: We use rates[0] for current tx power because + * it covers most of the rates, in most cases. It's our + * tx power limit and what the user expects to see. */ + ah->ah_txpower.txp_min_pwr = 2 * rates[7]; + ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; + + /* Set max txpower for correct OFDM operation on all rates + * -that is the txpower for 54Mbit-, it's used for the PAPD + * gain probe and it's in 0.5dB units */ + ah->ah_txpower.txp_ofdm = rates[7]; + /* Now that we have all rates setup use table offset to * match the power range set by user with the power indices * on PCDAC/PDADC table */ for (i = 0; i < 16; i++) { - rates[i] += ah->ah_txpower.txp_offset; + rate_idx_scaled = rates[i] + ah->ah_txpower.txp_offset; /* Don't get out of bounds */ - if (rates[i] > 63) - rates[i] = 63; + if (rate_idx_scaled > 63) + rate_idx_scaled = 63; + if (rate_idx_scaled < 0) + rate_idx_scaled = 0; + rates[i] = rate_idx_scaled; } - - /* Min/max in 0.25dB units */ - ah->ah_txpower.txp_min_pwr = 2 * rates[7]; - ah->ah_txpower.txp_max_pwr = 2 * rates[0]; - ah->ah_txpower.txp_ofdm = rates[7]; } -/* - * Set transmission power +/** + * ath5k_hw_txpower() - Set transmission power limit for a given channel + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @txpower: Requested tx power in 0.5dB steps + * + * Combines all of the above to set the requested tx power limit + * on hw. */ -int +static int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - u8 ee_mode, u8 txpower) + u8 txpower) { struct ath5k_rate_pcal_info rate_info; + struct ieee80211_channel *curr_channel = ah->ah_current_channel; + int ee_mode; u8 type; int ret; if (txpower > AR5K_TUNE_MAX_TXPOWER) { - ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); + ATH5K_ERR(ah, "invalid tx power: %u\n", txpower); return -EINVAL; } - /* Reset TX power values */ - memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); - ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; - ah->ah_txpower.txp_min_pwr = 0; - ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER; + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); /* Initialize TX power table */ switch (ah->ah_radio) { + case AR5K_RF5110: + /* TODO */ + return 0; case AR5K_RF5111: type = AR5K_PWRTABLE_PWR_TO_PCDAC; break; @@ -3022,10 +3637,33 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, return -EINVAL; } - /* FIXME: Only on channel/mode change */ - ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type); - if (ret) - return ret; + /* + * If we don't change channel/mode skip tx powertable calculation + * and use the cached one. + */ + if (!ah->ah_txpower.txp_setup || + (channel->hw_value != curr_channel->hw_value) || + (channel->center_freq != curr_channel->center_freq)) { + /* Reset TX power values but preserve requested + * tx power from above */ + int requested_txpower = ah->ah_txpower.txp_requested; + + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + + /* Restore TPC setting and requested tx power */ + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + + ah->ah_txpower.txp_requested = requested_txpower; + + /* Calculate the powertable */ + ret = ath5k_setup_channel_powertable(ah, channel, + ee_mode, type); + if (ret) + return ret; + } + + /* Write table on hw */ + ath5k_write_channel_powertable(ah, ee_mode, type); /* Limit max power if we have a CTL available */ ath5k_get_max_ctl_power(ah, channel); @@ -3036,7 +3674,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* FIXME: TPC scale reduction */ - /* Get surounding channels for per-rate power table + /* Get surrounding channels for per-rate power table * calibration */ ath5k_get_rate_pcal_data(ah, channel, &rate_info); @@ -3071,40 +3709,257 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP), AR5K_TPC); } else { - ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | - AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + ath5k_hw_reg_write(ah, AR5K_TUNE_MAX_TXPOWER, + AR5K_PHY_TXPOWER_RATE_MAX); } return 0; } -int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) +/** + * ath5k_hw_set_txpower_limit() - Set txpower limit for the current channel + * @ah: The &struct ath5k_hw + * @txpower: The requested tx power limit in 0.5dB steps + * + * This function provides access to ath5k_hw_txpower to the driver in + * case user or an application changes it while PHY is running. + */ +int +ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) { - /*Just a try M.F.*/ - struct ieee80211_channel *channel = ah->ah_current_channel; - u8 ee_mode; + ATH5K_DBG(ah, ATH5K_DEBUG_TXPOWER, + "changing txpower to %d\n", txpower); - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_T: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - case CHANNEL_TG: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); + return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower); +} + + +/*************\ + Init function +\*************/ + +/** + * ath5k_hw_phy_init() - Initialize PHY + * @ah: The &struct ath5k_hw + * @channel: The @struct ieee80211_channel + * @mode: One of enum ath5k_driver_mode + * @fast: Try a fast channel switch instead + * + * This is the main function used during reset to initialize PHY + * or do a fast channel change if possible. + * + * NOTE: Do not call this one from the driver, it assumes PHY is in a + * warm reset state ! + */ +int +ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 mode, bool fast) +{ + struct ieee80211_channel *curr_channel; + int ret, i; + u32 phy_tst1; + ret = 0; + + /* + * Sanity check for fast flag + * Don't try fast channel change when changing modulation + * mode/band. We check for chip compatibility on + * ath5k_hw_reset. + */ + curr_channel = ah->ah_current_channel; + if (fast && (channel->hw_value != curr_channel->hw_value)) return -EINVAL; + + /* + * On fast channel change we only set the synth parameters + * while PHY is running, enable calibration and skip the rest. + */ + if (fast) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + for (i = 0; i < 100; i++) { + if (ath5k_hw_reg_read(ah, AR5K_PHY_RFBUS_GRANT)) + break; + udelay(5); + } + /* Failed */ + if (i >= 100) + return -EIO; + + /* Set channel and wait for synth */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + ath5k_hw_wait_for_synth(ah, channel); } - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, - "changing txpower to %d\n", txpower); + /* + * Set TX power + * + * Note: We need to do that before we set + * RF buffer settings on 5211/5212+ so that we + * properly set curve indices. + */ + ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_requested ? + ah->ah_txpower.txp_requested * 2 : + AR5K_TUNE_MAX_TXPOWER); + if (ret) + return ret; + + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value != AR5K_MODE_11B) { - return ath5k_hw_txpower(ah, channel, ee_mode, txpower); + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + + /* Spur info is available only from EEPROM versions + * greater than 5.3, but the EEPROM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); + } + + /* If we used fast channel switching + * we are done, release RF bus and + * fire up NF calibration. + * + * Note: Only NF calibration due to + * channel change, not AGC calibration + * since AGC is still running ! + */ + if (fast) { + /* + * Release RF Bus grant + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + + /* + * Start NF calibration + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + return ret; + } + + /* + * For 5210 we do all initialization using + * initvals, so we don't have to modify + * any settings (5210 also only supports + * a/aturbo modes) + */ + if (ah->ah_version != AR5K_AR5210) { + + /* + * Write initial RF gain settings + * This should work for both 5111/5112 + */ + ret = ath5k_hw_rfgain_init(ah, channel->band); + if (ret) + return ret; + + usleep_range(1000, 1500); + + /* + * Write RF buffer + */ + ret = ath5k_hw_rfregs_init(ah, channel, mode); + if (ret) + return ret; + + /*Enable/disable 802.11b mode on 5111 + (enable 2111 frequency converter + CCK)*/ + if (ah->ah_radio == AR5K_RF5111) { + if (mode == AR5K_MODE_11B) + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + } + + } else if (ah->ah_version == AR5K_AR5210) { + usleep_range(1000, 1500); + /* Disable phy and wait */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + usleep_range(1000, 1500); + } + + /* Set channel on PHY */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + /* + * Enable the PHY and wait until completion + * This includes BaseBand and Synthesizer + * activation. + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + + ath5k_hw_wait_for_synth(ah, channel); + + /* + * Perform ADC test to see if baseband is ready + * Set tx hold and check adc test register + */ + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + usleep_range(200, 250); + } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + + /* + * Start automatic gain control calibration + * + * During AGC calibration RX path is re-routed to + * a power detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), which doesn't + * interrupt rx path. + * + * While rx path is re-routed to the power detector we also + * start a noise floor calibration to measure the + * card's noise floor (the noise we measure when we are not + * transmitting or receiving anything). + * + * If we are in a noisy environment, AGC calibration may time + * out and/or noise floor calibration might timeout. + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF); + + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_iq_cal_needed = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_iq_cal_needed = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ + if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false)) { + ATH5K_ERR(ah, "gain calibration timeout (%uMHz)\n", + channel->center_freq); + } + + /* Restore antenna mode */ + ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); + + return ret; } diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c index 84c717ded1c..0583c69d26d 100644 --- a/drivers/net/wireless/ath/ath5k/qcu.c +++ b/drivers/net/wireless/ath/ath5k/qcu.c @@ -17,42 +17,141 @@ */ /********************************************\ -Queue Control Unit, DFS Control Unit Functions +Queue Control Unit, DCF Control Unit Functions \********************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" #include "reg.h" #include "debug.h" -#include "base.h" +#include <linux/log2.h> -/* - * Get properties for a transmit queue +/** + * DOC: Queue Control Unit (QCU)/DCF Control Unit (DCU) functions + * + * Here we setup parameters for the 12 available TX queues. Note that + * on the various registers we can usually only map the first 10 of them so + * basically we have 10 queues to play with. Each queue has a matching + * QCU that controls when the queue will get triggered and multiple QCUs + * can be mapped to a single DCU that controls the various DFS parameters + * for the various queues. In our setup we have a 1:1 mapping between QCUs + * and DCUs allowing us to have different DFS settings for each queue. + * + * When a frame goes into a TX queue, QCU decides when it'll trigger a + * transmission based on various criteria (such as how many data we have inside + * it's buffer or -if it's a beacon queue- if it's time to fire up the queue + * based on TSF etc), DCU adds backoff, IFSes etc and then a scheduler + * (arbitrator) decides the priority of each QCU based on it's configuration + * (e.g. beacons are always transmitted when they leave DCU bypassing all other + * frames from other queues waiting to be transmitted). After a frame leaves + * the DCU it goes to PCU for further processing and then to PHY for + * the actual transmission. */ -int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, - struct ath5k_txq_info *queue_info) + + +/******************\ +* Helper functions * +\******************/ + +/** + * ath5k_hw_num_tx_pending() - Get number of pending frames for a given queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + */ +u32 +ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) { - memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); - return 0; + u32 pending; + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return false; + + /* XXX: How about AR5K_CFG_TXCNT ? */ + if (ah->ah_version == AR5K_AR5210) + return false; + + pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue)); + pending &= AR5K_QCU_STS_FRMPENDCNT; + + /* It's possible to have no frames pending even if TXE + * is set. To indicate that q has not stopped return + * true */ + if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return true; + + return pending; } -/* +/** + * ath5k_hw_release_tx_queue() - Set a transmit queue inactive + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + */ +void +ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) + return; + + /* This queue will be skipped in further operations */ + ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; + /*For SIMR setup*/ + AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); +} + +/** + * ath5k_cw_validate() - Make sure the given cw is valid + * @cw_req: The contention window value to check + * * Make sure cw is a power of 2 minus 1 and smaller than 1024 */ -static u16 ath5k_cw_validate(u16 cw_req) +static u16 +ath5k_cw_validate(u16 cw_req) { - u32 cw = 1; cw_req = min(cw_req, (u16)1023); - while (cw < cw_req) - cw = (cw << 1) | 1; + /* Check if cw_req + 1 a power of 2 */ + if (is_power_of_2(cw_req + 1)) + return cw_req; + + /* Check if cw_req is a power of 2 */ + if (is_power_of_2(cw_req)) + return cw_req - 1; - return cw; + /* If none of the above is correct + * find the closest power of 2 */ + cw_req = (u16) roundup_pow_of_two(cw_req) - 1; + + return cw_req; } -/* - * Set properties for a transmit queue +/** + * ath5k_hw_get_tx_queueprops() - Get properties for a transmit queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * @queue_info: The &struct ath5k_txq_info to fill + */ +int +ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info) +{ + memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); + return 0; +} + +/** + * ath5k_hw_set_tx_queueprops() - Set properties for a transmit queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * @qinfo: The &struct ath5k_txq_info to use + * + * Returns 0 on success or -EIO if queue is inactive */ -int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, +int +ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *qinfo) { struct ath5k_txq_info *qi; @@ -92,10 +191,16 @@ int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, return 0; } -/* - * Initialize a transmit queue +/** + * ath5k_hw_setup_tx_queue() - Initialize a transmit queue + * @ah: The &struct ath5k_hw + * @queue_type: One of enum ath5k_tx_queue + * @queue_info: The &struct ath5k_txq_info to use + * + * Returns 0 on success, -EINVAL on invalid arguments */ -int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, +int +ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info) { unsigned int queue; @@ -104,8 +209,8 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, /* * Get queue by type */ - /*5210 only has 2 queues*/ - if (ah->ah_version == AR5K_AR5210) { + /* 5210 only has 2 queues */ + if (ah->ah_capabilities.cap_queues.q_tx_num == 2) { switch (queue_type) { case AR5K_TX_QUEUE_DATA: queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; @@ -137,13 +242,6 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, case AR5K_TX_QUEUE_CAB: queue = AR5K_TX_QUEUE_ID_CAB; break; - case AR5K_TX_QUEUE_XR_DATA: - if (ah->ah_version != AR5K_AR5212) - ATH5K_ERR(ah->ah_sc, - "XR data queues only supported in" - " 5212!\n"); - queue = AR5K_TX_QUEUE_ID_XR_DATA; - break; default: return -EINVAL; } @@ -172,361 +270,468 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, return queue; } -/* - * Get number of pending frames - * for a specific queue [5211+] - */ -u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) -{ - u32 pending; - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return false; - - /* XXX: How about AR5K_CFG_TXCNT ? */ - if (ah->ah_version == AR5K_AR5210) - return false; - - pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue)); - pending &= AR5K_QCU_STS_FRMPENDCNT; - /* It's possible to have no frames pending even if TXE - * is set. To indicate that q has not stopped return - * true */ - if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) - return true; +/*******************************\ +* Single QCU/DCU initialization * +\*******************************/ - return pending; -} - -/* - * Set a transmit queue inactive +/** + * ath5k_hw_set_tx_retry_limits() - Set tx retry limits on DCU + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * + * This function is used when initializing a queue, to set + * retry limits based on ah->ah_retry_* and the chipset used. */ -void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +void +ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, + unsigned int queue) { - if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) - return; + /* Single data queue on AR5210 */ + if (ah->ah_version == AR5K_AR5210) { + struct ath5k_txq_info *tq = &ah->ah_txq[queue]; - /* This queue will be skipped in further operations */ - ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; - /*For SIMR setup*/ - AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); + if (queue > 0) + return; + + ath5k_hw_reg_write(ah, + (tq->tqi_cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) + | AR5K_REG_SM(ah->ah_retry_long, + AR5K_NODCU_RETRY_LMT_SLG_RETRY) + | AR5K_REG_SM(ah->ah_retry_short, + AR5K_NODCU_RETRY_LMT_SSH_RETRY) + | AR5K_REG_SM(ah->ah_retry_long, + AR5K_NODCU_RETRY_LMT_LG_RETRY) + | AR5K_REG_SM(ah->ah_retry_short, + AR5K_NODCU_RETRY_LMT_SH_RETRY), + AR5K_NODCU_RETRY_LMT); + /* DCU on AR5211+ */ + } else { + ath5k_hw_reg_write(ah, + AR5K_REG_SM(ah->ah_retry_long, + AR5K_DCU_RETRY_LMT_RTS) + | AR5K_REG_SM(ah->ah_retry_long, + AR5K_DCU_RETRY_LMT_STA_RTS) + | AR5K_REG_SM(max(ah->ah_retry_long, ah->ah_retry_short), + AR5K_DCU_RETRY_LMT_STA_DATA), + AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); + } } -/* - * Set DFS properties for a transmit queue on DCU +/** + * ath5k_hw_reset_tx_queue() - Initialize a single hw queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * + * Set DCF properties for the given transmit queue on DCU + * and configures all queue-specific parameters. */ -int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) +int +ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) { - u32 retry_lg, retry_sh; struct ath5k_txq_info *tq = &ah->ah_txq[queue]; AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); tq = &ah->ah_txq[queue]; - if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) + /* Skip if queue inactive or if we are on AR5210 + * that doesn't have QCU/DCU */ + if ((ah->ah_version == AR5K_AR5210) || + (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)) return 0; - if (ah->ah_version == AR5K_AR5210) { - /* Only handle data queues, others will be ignored */ - if (tq->tqi_type != AR5K_TX_QUEUE_DATA) - return 0; - - /* Set Slot time */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, - AR5K_SLOT_TIME); - /* Set ACK_CTS timeout */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : - AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); - /* Set Transmit Latency */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_TRANSMIT_LATENCY_TURBO : - AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); - - /* Set IFS0 */ - if (ah->ah_turbo) { - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + - tq->tqi_aifs * AR5K_INIT_SLOT_TIME_TURBO) << - AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, - AR5K_IFS0); - } else { - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + - tq->tqi_aifs * AR5K_INIT_SLOT_TIME) << - AR5K_IFS0_DIFS_S) | - AR5K_INIT_SIFS, AR5K_IFS0); - } + /* + * Set contention window (cw_min/cw_max) + * and arbitrated interframe space (aifs)... + */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(tq->tqi_cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | + AR5K_REG_SM(tq->tqi_cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | + AR5K_REG_SM(tq->tqi_aifs, AR5K_DCU_LCL_IFS_AIFS), + AR5K_QUEUE_DFS_LOCAL_IFS(queue)); + + /* + * Set tx retry limits for this queue + */ + ath5k_hw_set_tx_retry_limits(ah, queue); - /* Set IFS1 */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_PROTO_TIME_CNTRL_TURBO : - AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); - /* Set AR5K_PHY_SETTLING */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x38 : - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x1C, - AR5K_PHY_SETTLING); - /* Set Frame Control Register */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | - AR5K_PHY_TURBO_SHORT | 0x2020) : - (AR5K_PHY_FRAME_CTL_INI | 0x1020), - AR5K_PHY_FRAME_CTL_5210); - } /* - * Calculate and set retry limits + * Set misc registers */ - if (ah->ah_software_retry) { - /* XXX Need to test this */ - retry_lg = ah->ah_limit_tx_retries; - retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? - AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; - } else { - retry_lg = AR5K_INIT_LG_RETRY; - retry_sh = AR5K_INIT_SH_RETRY; - } - /*No QCU/DCU [5210]*/ - if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_reg_write(ah, - (tq->tqi_cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) - | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_NODCU_RETRY_LMT_SLG_RETRY) - | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_NODCU_RETRY_LMT_SSH_RETRY) - | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) - | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), - AR5K_NODCU_RETRY_LMT); - } else { - /*QCU/DCU [5211+]*/ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_DCU_RETRY_LMT_SLG_RETRY) | - AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_DCU_RETRY_LMT_SSH_RETRY) | - AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | - AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), - AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); + /* Enable DCU to wait for next fragment from QCU */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + AR5K_DCU_MISC_FRAG_WAIT); - /*===Rest is also for QCU/DCU only [5211+]===*/ + /* On Maui and Spirit use the global seqnum on DCU */ + if (ah->ah_mac_version < AR5K_SREV_AR5211) + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + AR5K_DCU_MISC_SEQNUM_CTL); + + /* Constant bit rate period */ + if (tq->tqi_cbr_period) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, + AR5K_QCU_CBRCFG_INTVAL) | + AR5K_REG_SM(tq->tqi_cbr_overflow_limit, + AR5K_QCU_CBRCFG_ORN_THRES), + AR5K_QUEUE_CBRCFG(queue)); - /* - * Set contention window (cw_min/cw_max) - * and arbitrated interframe space (aifs)... - */ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(tq->tqi_cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | - AR5K_REG_SM(tq->tqi_cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | - AR5K_REG_SM(tq->tqi_aifs, AR5K_DCU_LCL_IFS_AIFS), - AR5K_QUEUE_DFS_LOCAL_IFS(queue)); - - /* - * Set misc registers - */ - /* Enable DCU early termination for this queue */ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_DCU_EARLY); + AR5K_QCU_MISC_FRSHED_CBR); - /* Enable DCU to wait for next fragment from QCU */ - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - AR5K_DCU_MISC_FRAG_WAIT); - - /* On Maui and Spirit use the global seqnum on DCU */ - if (ah->ah_mac_version < AR5K_SREV_AR5211) - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - AR5K_DCU_MISC_SEQNUM_CTL); - - if (tq->tqi_cbr_period) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, - AR5K_QCU_CBRCFG_INTVAL) | - AR5K_REG_SM(tq->tqi_cbr_overflow_limit, - AR5K_QCU_CBRCFG_ORN_THRES), - AR5K_QUEUE_CBRCFG(queue)); + if (tq->tqi_cbr_overflow_limit) AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_CBR); - if (tq->tqi_cbr_overflow_limit) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), AR5K_QCU_MISC_CBR_THRES_ENABLE); - } + } + + /* Ready time interval */ + if (tq->tqi_ready_time && (tq->tqi_type != AR5K_TX_QUEUE_CAB)) + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, + AR5K_QCU_RDYTIMECFG_INTVAL) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); - if (tq->tqi_ready_time && - (tq->tqi_type != AR5K_TX_QUEUE_CAB)) - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, - AR5K_QCU_RDYTIMECFG_INTVAL) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - - if (tq->tqi_burst_time) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, - AR5K_DCU_CHAN_TIME_DUR) | - AR5K_DCU_CHAN_TIME_ENABLE, - AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); - - if (tq->tqi_flags - & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), + if (tq->tqi_burst_time) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, + AR5K_DCU_CHAN_TIME_DUR) | + AR5K_DCU_CHAN_TIME_ENABLE, + AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), AR5K_QCU_MISC_RDY_VEOL_POLICY); - } + } - if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, - AR5K_QUEUE_DFS_MISC(queue)); + /* Enable/disable Post frame backoff */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, + AR5K_QUEUE_DFS_MISC(queue)); - if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, - AR5K_QUEUE_DFS_MISC(queue)); + /* Enable/disable fragmentation burst backoff */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, + AR5K_QUEUE_DFS_MISC(queue)); - /* - * Set registers by queue type - */ - switch (tq->tqi_type) { - case AR5K_TX_QUEUE_BEACON: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + /* + * Set registers by queue type + */ + switch (tq->tqi_type) { + case AR5K_TX_QUEUE_BEACON: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), AR5K_QCU_MISC_FRSHED_DBA_GT | AR5K_QCU_MISC_CBREXP_BCN_DIS | AR5K_QCU_MISC_BCN_ENABLE); - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << AR5K_DCU_MISC_ARBLOCK_CTL_S) | AR5K_DCU_MISC_ARBLOCK_IGNORE | AR5K_DCU_MISC_POST_FR_BKOFF_DIS | AR5K_DCU_MISC_BCN_ENABLE); - break; + break; - case AR5K_TX_QUEUE_CAB: - /* XXX: use BCN_SENT_GT, if we can figure out how */ - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP_DIS | - AR5K_QCU_MISC_CBREXP_BCN_DIS); + case AR5K_TX_QUEUE_CAB: + /* XXX: use BCN_SENT_GT, if we can figure out how */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP_DIS | + AR5K_QCU_MISC_CBREXP_BCN_DIS); - ath5k_hw_reg_write(ah, ((tq->tqi_ready_time - - (AR5K_TUNE_SW_BEACON_RESP - - AR5K_TUNE_DMA_BEACON_RESP) - + ath5k_hw_reg_write(ah, ((tq->tqi_ready_time - + (AR5K_TUNE_SW_BEACON_RESP - + AR5K_TUNE_DMA_BEACON_RESP) - AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S)); - break; + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S)); + break; - case AR5K_TX_QUEUE_UAPSD: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBREXP_DIS); - break; + case AR5K_TX_QUEUE_UAPSD: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBREXP_DIS); + break; - case AR5K_TX_QUEUE_DATA: - default: + case AR5K_TX_QUEUE_DATA: + default: break; - } - - /* TODO: Handle frame compression */ - - /* - * Enable interrupts for this tx queue - * in the secondary interrupt mask registers - */ - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue); - - /* Update secondary interrupt mask registers */ - - /* Filter out inactive queues */ - ah->ah_txq_imr_txok &= ah->ah_txq_status; - ah->ah_txq_imr_txerr &= ah->ah_txq_status; - ah->ah_txq_imr_txurn &= ah->ah_txq_status; - ah->ah_txq_imr_txdesc &= ah->ah_txq_status; - ah->ah_txq_imr_txeol &= ah->ah_txq_status; - ah->ah_txq_imr_cbrorn &= ah->ah_txq_status; - ah->ah_txq_imr_cbrurn &= ah->ah_txq_status; - ah->ah_txq_imr_qtrig &= ah->ah_txq_status; - ah->ah_txq_imr_nofrm &= ah->ah_txq_status; - - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, - AR5K_SIMR0_QCU_TXOK) | - AR5K_REG_SM(ah->ah_txq_imr_txdesc, - AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, - AR5K_SIMR1_QCU_TXERR) | - AR5K_REG_SM(ah->ah_txq_imr_txeol, - AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); - /* Update simr2 but don't overwrite rest simr2 settings */ - AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN); - AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, - AR5K_REG_SM(ah->ah_txq_imr_txurn, - AR5K_SIMR2_QCU_TXURN)); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn, - AR5K_SIMR3_QCBRORN) | - AR5K_REG_SM(ah->ah_txq_imr_cbrurn, - AR5K_SIMR3_QCBRURN), AR5K_SIMR3); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig, - AR5K_SIMR4_QTRIG), AR5K_SIMR4); - /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */ - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm, - AR5K_TXNOFRM_QCU), AR5K_TXNOFRM); - /* No queue has TXNOFRM enabled, disable the interrupt - * by setting AR5K_TXNOFRM to zero */ - if (ah->ah_txq_imr_nofrm == 0) - ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM); - - /* Set QCU mask for this DCU to save power */ - AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue); } + /* TODO: Handle frame compression */ + + /* + * Enable interrupts for this tx queue + * in the secondary interrupt mask registers + */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue); + + /* Update secondary interrupt mask registers */ + + /* Filter out inactive queues */ + ah->ah_txq_imr_txok &= ah->ah_txq_status; + ah->ah_txq_imr_txerr &= ah->ah_txq_status; + ah->ah_txq_imr_txurn &= ah->ah_txq_status; + ah->ah_txq_imr_txdesc &= ah->ah_txq_status; + ah->ah_txq_imr_txeol &= ah->ah_txq_status; + ah->ah_txq_imr_cbrorn &= ah->ah_txq_status; + ah->ah_txq_imr_cbrurn &= ah->ah_txq_status; + ah->ah_txq_imr_qtrig &= ah->ah_txq_status; + ah->ah_txq_imr_nofrm &= ah->ah_txq_status; + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, + AR5K_SIMR0_QCU_TXOK) | + AR5K_REG_SM(ah->ah_txq_imr_txdesc, + AR5K_SIMR0_QCU_TXDESC), + AR5K_SIMR0); + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, + AR5K_SIMR1_QCU_TXERR) | + AR5K_REG_SM(ah->ah_txq_imr_txeol, + AR5K_SIMR1_QCU_TXEOL), + AR5K_SIMR1); + + /* Update SIMR2 but don't overwrite rest simr2 settings */ + AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN); + AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, + AR5K_REG_SM(ah->ah_txq_imr_txurn, + AR5K_SIMR2_QCU_TXURN)); + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn, + AR5K_SIMR3_QCBRORN) | + AR5K_REG_SM(ah->ah_txq_imr_cbrurn, + AR5K_SIMR3_QCBRURN), + AR5K_SIMR3); + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig, + AR5K_SIMR4_QTRIG), AR5K_SIMR4); + + /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */ + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm, + AR5K_TXNOFRM_QCU), AR5K_TXNOFRM); + + /* No queue has TXNOFRM enabled, disable the interrupt + * by setting AR5K_TXNOFRM to zero */ + if (ah->ah_txq_imr_nofrm == 0) + ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM); + + /* Set QCU mask for this DCU to save power */ + AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue); + return 0; } -/* - * Set slot time on DCU + +/**************************\ +* Global QCU/DCU functions * +\**************************/ + +/** + * ath5k_hw_set_ifs_intervals() - Set global inter-frame spaces on DCU + * @ah: The &struct ath5k_hw + * @slot_time: Slot time in us + * + * Sets the global IFS intervals on DCU (also works on AR5210) for + * the given slot time and the current bwmode. */ -int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) +int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time) { + struct ieee80211_channel *channel = ah->ah_current_channel; + enum ieee80211_band band; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + u32 ack_tx_time, eifs, eifs_clock, sifs, sifs_clock; u32 slot_time_clock = ath5k_hw_htoclock(ah, slot_time); + u32 rate_flags, i; if (slot_time < 6 || slot_time_clock > AR5K_SLOT_TIME_MAX) return -EINVAL; - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, slot_time_clock, AR5K_SLOT_TIME); + sifs = ath5k_hw_get_default_sifs(ah); + sifs_clock = ath5k_hw_htoclock(ah, sifs - 2); + + /* EIFS + * Txtime of ack at lowest rate + SIFS + DIFS + * (DIFS = SIFS + 2 * Slot time) + * + * Note: HAL has some predefined values for EIFS + * Turbo: (37 + 2 * 6) + * Default: (74 + 2 * 9) + * Half: (149 + 2 * 13) + * Quarter: (298 + 2 * 21) + * + * (74 + 2 * 6) for AR5210 default and turbo ! + * + * According to the formula we have + * ack_tx_time = 25 for turbo and + * ack_tx_time = 42.5 * clock multiplier + * for default/half/quarter. + * + * This can't be right, 42 is what we would get + * from ath5k_hw_get_frame_dur_for_bwmode or + * ieee80211_generic_frame_duration for zero frame + * length and without SIFS ! + * + * Also we have different lowest rate for 802.11a + */ + if (channel->band == IEEE80211_BAND_5GHZ) + band = IEEE80211_BAND_5GHZ; else - ath5k_hw_reg_write(ah, slot_time_clock, AR5K_DCU_GBL_IFS_SLOT); + band = IEEE80211_BAND_2GHZ; + + switch (ah->ah_bwmode) { + case AR5K_BWMODE_5MHZ: + rate_flags = IEEE80211_RATE_SUPPORTS_5MHZ; + break; + case AR5K_BWMODE_10MHZ: + rate_flags = IEEE80211_RATE_SUPPORTS_10MHZ; + break; + default: + rate_flags = 0; + break; + } + sband = &ah->sbands[band]; + rate = NULL; + for (i = 0; i < sband->n_bitrates; i++) { + if ((rate_flags & sband->bitrates[i].flags) != rate_flags) + continue; + rate = &sband->bitrates[i]; + break; + } + if (WARN_ON(!rate)) + return -EINVAL; + + ack_tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, false); + + /* ack_tx_time includes an SIFS already */ + eifs = ack_tx_time + sifs + 2 * slot_time; + eifs_clock = ath5k_hw_htoclock(ah, eifs); + + /* Set IFS settings on AR5210 */ + if (ah->ah_version == AR5K_AR5210) { + u32 pifs, pifs_clock, difs, difs_clock; + + /* Set slot time */ + ath5k_hw_reg_write(ah, slot_time_clock, AR5K_SLOT_TIME); + + /* Set EIFS */ + eifs_clock = AR5K_REG_SM(eifs_clock, AR5K_IFS1_EIFS); + + /* PIFS = Slot time + SIFS */ + pifs = slot_time + sifs; + pifs_clock = ath5k_hw_htoclock(ah, pifs); + pifs_clock = AR5K_REG_SM(pifs_clock, AR5K_IFS1_PIFS); + + /* DIFS = SIFS + 2 * Slot time */ + difs = sifs + 2 * slot_time; + difs_clock = ath5k_hw_htoclock(ah, difs); + + /* Set SIFS/DIFS */ + ath5k_hw_reg_write(ah, (difs_clock << + AR5K_IFS0_DIFS_S) | sifs_clock, + AR5K_IFS0); + + /* Set PIFS/EIFS and preserve AR5K_INIT_CARR_SENSE_EN */ + ath5k_hw_reg_write(ah, pifs_clock | eifs_clock | + (AR5K_INIT_CARR_SENSE_EN << AR5K_IFS1_CS_EN_S), + AR5K_IFS1); + + return 0; + } + + /* Set IFS slot time */ + ath5k_hw_reg_write(ah, slot_time_clock, AR5K_DCU_GBL_IFS_SLOT); + + /* Set EIFS interval */ + ath5k_hw_reg_write(ah, eifs_clock, AR5K_DCU_GBL_IFS_EIFS); + + /* Set SIFS interval in usecs */ + AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, + AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC, + sifs); + + /* Set SIFS interval in clock cycles */ + ath5k_hw_reg_write(ah, sifs_clock, AR5K_DCU_GBL_IFS_SIFS); return 0; } + +/** + * ath5k_hw_init_queues() - Initialize tx queues + * @ah: The &struct ath5k_hw + * + * Initializes all tx queues based on information on + * ah->ah_txq* set by the driver + */ +int +ath5k_hw_init_queues(struct ath5k_hw *ah) +{ + int i, ret; + + /* TODO: HW Compression support for data queues */ + /* TODO: Burst prefetch for data queues */ + + /* + * Reset queues and start beacon timers at the end of the reset routine + * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping + * Note: If we want we can assign multiple qcus on one dcu. + */ + if (ah->ah_version != AR5K_AR5210) + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { + ret = ath5k_hw_reset_tx_queue(ah, i); + if (ret) { + ATH5K_ERR(ah, + "failed to reset TX queue #%d\n", i); + return ret; + } + } + else + /* No QCU/DCU on AR5210, just set tx + * retry limits. We set IFS parameters + * on ath5k_hw_set_ifs_intervals */ + ath5k_hw_set_tx_retry_limits(ah, 0); + + /* Set the turbo flag when operating on 40MHz */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + AR5K_REG_ENABLE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, + AR5K_DCU_GBL_IFS_MISC_TURBO_MODE); + + /* If we didn't set IFS timings through + * ath5k_hw_set_coverage_class make sure + * we set them here */ + if (!ah->ah_coverage_class) { + unsigned int slot_time = ath5k_hw_get_default_slottime(ah); + ath5k_hw_set_ifs_intervals(ah, slot_time); + } + + return 0; +} diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index ca79ecd832f..0ea1608b47f 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -72,7 +72,7 @@ #define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ #define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ #define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ -#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ +#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ #define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ #define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ #define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ @@ -132,8 +132,8 @@ * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). - * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i - * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what + * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i + * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. */ #define AR5K_BSR 0x002c /* Register Address */ @@ -170,7 +170,7 @@ #define AR5K_TXCFG_SDMAMR_S 0 #define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ #define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ -#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */ #define AR5K_TXCFG_TXFULL_S 4 #define AR5K_TXCFG_TXFULL_0B 0x00000000 #define AR5K_TXCFG_TXFULL_64B 0x00000010 @@ -280,19 +280,26 @@ * 5211/5212 we have one primary and 4 secondary registers. * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. * Most of these bits are common for all chipsets. + * + * NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain + * the logical OR from per-queue interrupt bits found on SISR registers + * (see below). */ #define AR5K_ISR 0x001c /* Register Address [5210] */ #define AR5K_PISR 0x0080 /* Register Address [5211+] */ -#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */ #define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ #define AR5K_ISR_RXERR 0x00000004 /* Receive error */ #define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ #define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ #define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ -#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */ +#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */ #define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ #define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ -#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */ +#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) + * NOTE: We don't have per-queue info for this + * one, but we can enable it per-queue through + * TXNOFRM_QCU field on TXNOFRM register */ #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ @@ -302,21 +309,29 @@ #define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ #define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ -#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ -#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] + * 'or' of MCABT, SSERR, DPERR from SISR2 */ +#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ #define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ #define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ #define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ -#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ +#define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */ #define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ #define AR5K_ISR_TIM 0x00800000 /* [5211+] */ -#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, - CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ +#define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt + * 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + * CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ #define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ #define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ #define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ #define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ +#define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\ + AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\ + AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\ + AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\ + AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG) + /* * Secondary status registers [5211+] (0 - 4) * @@ -347,7 +362,7 @@ #define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ #define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ -#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */ +#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */ #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ #define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ @@ -372,21 +387,21 @@ /* * Interrupt Mask Registers * - * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary + * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. */ #define AR5K_IMR 0x0020 /* Register Address [5210] */ #define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ -#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/ #define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ #define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ #define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ #define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ #define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ -#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/ +#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/ #define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ #define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ -#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/ +#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/ #define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ #define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ #define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ @@ -397,7 +412,7 @@ #define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ #define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ -#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ #define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ #define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ #define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ @@ -601,7 +616,7 @@ * QCU misc registers */ #define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ -#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ +#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */ #define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ #define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ #define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ @@ -653,13 +668,13 @@ * registers [5211+] * * These registers control the various characteristics of each queue - * for 802.11e (WME) combatibility so they go together with + * for 802.11e (WME) compatibility so they go together with * QCU registers in pairs. For each queue we have a QCU mask register, * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), * a retry limit register (0x1080 - 0x10ac), a channel time register * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and * a sequence number register (0x1140 - 0x116c). It seems that "global" - * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). + * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). * We use the same macros here for easier register access. * */ @@ -686,16 +701,15 @@ /* * DCU retry limit registers + * all these fields don't allow zero values */ #define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */ -#define AR5K_DCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ -#define AR5K_DCU_RETRY_LMT_SH_RETRY_S 0 -#define AR5K_DCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry limit mask */ -#define AR5K_DCU_RETRY_LMT_LG_RETRY_S 4 -#define AR5K_DCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask (?) */ -#define AR5K_DCU_RETRY_LMT_SSH_RETRY_S 8 -#define AR5K_DCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask (?) */ -#define AR5K_DCU_RETRY_LMT_SLG_RETRY_S 14 +#define AR5K_DCU_RETRY_LMT_RTS 0x0000000f /* RTS failure limit. Transmission fails if no CTS is received for this number of times */ +#define AR5K_DCU_RETRY_LMT_RTS_S 0 +#define AR5K_DCU_RETRY_LMT_STA_RTS 0x00003f00 /* STA RTS failure limit. If exceeded CW reset */ +#define AR5K_DCU_RETRY_LMT_STA_RTS_S 8 +#define AR5K_DCU_RETRY_LMT_STA_DATA 0x000fc000 /* STA data failure limit. If exceeded CW reset. */ +#define AR5K_DCU_RETRY_LMT_STA_DATA_S 14 #define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q) /* @@ -780,13 +794,14 @@ * and it's used for generating pseudo-random * number sequences. * - * (If i understand corectly, random numbers are + * (If i understand correctly, random numbers are * used for idle sensing -multiplied with cwmin/max etc-) */ #define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ #define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ #define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ #define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC_S 4 #define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ #define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 #define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ @@ -895,7 +910,7 @@ #define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ #define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ -#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even with pending interrupts*/ #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ @@ -1007,7 +1022,7 @@ #define AR5K_PCIE_WAEN 0x407c /* - * PCI-E Serializer/Desirializer + * PCI-E Serializer/Deserializer * registers */ #define AR5K_PCIE_SERDES 0x4080 @@ -1063,7 +1078,7 @@ /* * EEPROM command register */ -#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */ +#define AR5K_EEPROM_CMD 0x6008 /* Register Address */ #define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ #define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ #define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ @@ -1083,7 +1098,7 @@ /* * EEPROM config register */ -#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ +#define AR5K_EEPROM_CFG 0x6010 /* Register Address */ #define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ #define AR5K_EEPROM_CFG_SIZE_AUTO 0 #define AR5K_EEPROM_CFG_SIZE_4KBIT 1 @@ -1125,7 +1140,7 @@ * Second station id register (Upper 16 bits of MAC address + PCU settings) */ #define AR5K_STA_ID1 0x8004 /* Register Address */ -#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */ +#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */ #define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ #define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ #define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ @@ -1227,7 +1242,7 @@ AR5K_USEC_5210 : AR5K_USEC_5211) #define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ #define AR5K_USEC_1_S 0 -#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ +#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */ #define AR5K_USEC_32_S 7 #define AR5K_USEC_TX_LATENCY_5211 0x007fc000 #define AR5K_USEC_TX_LATENCY_5211_S 14 @@ -1311,7 +1326,7 @@ #define AR5K_IFS1_EIFS 0x03fff000 #define AR5K_IFS1_EIFS_S 12 #define AR5K_IFS1_CS_EN 0x04000000 - +#define AR5K_IFS1_CS_EN_S 26 /* * CFP duration register @@ -1328,16 +1343,16 @@ #define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ #define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) -#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ -#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ -#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ -#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ -#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ -#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ -#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ +#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ +#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ +#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ +#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ +#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ +#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ +#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ #define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ #define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ -#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ +#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ #define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ #define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ #define AR5K_RX_FILTER_PHYERR \ @@ -1461,7 +1476,7 @@ * ADDAC test register [5211+] */ #define AR5K_ADDAC_TEST 0x8054 /* Register Address */ -#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ +#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ #define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ #define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ #define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ @@ -1632,7 +1647,7 @@ #define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ #define AR5K_SLEEP0_NEXT_DTIM_S 0 #define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ -#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */ #define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ #define AR5K_SLEEP0_CABTO_S 24 @@ -1657,7 +1672,7 @@ /* * TX power control (TPC) register * - * XXX: PCDAC steps (0.5dbm) or DBM ? + * XXX: PCDAC steps (0.5dBm) or dBm ? * */ #define AR5K_TXPC 0x80e8 /* Register Address */ @@ -1673,7 +1688,7 @@ /* * Profile count registers * - * These registers can be cleared and freezed with ATH5K_MIBC, but they do not + * These registers can be cleared and frozen with ATH5K_MIBC, but they do not * generate a MIB interrupt. * Instead of overflowing, they shift by one bit to the right. All registers * shift together, i.e. when one reaches the max, all shift at the same time by @@ -1838,7 +1853,7 @@ #define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ #define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ #define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ -#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ +#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */ #define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ #define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ #define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ @@ -2002,7 +2017,7 @@ #define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ #define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ #define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ -#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ +#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */ /* * PHY noise floor status register (CCA = Clear Channel Assessment) @@ -2038,7 +2053,7 @@ #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 /* Low thresholds */ -#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c +#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c #define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 @@ -2058,6 +2073,7 @@ #define AR5K_PHY_SCAL 0x9878 #define AR5K_PHY_SCAL_32MHZ 0x0000000e +#define AR5K_PHY_SCAL_32MHZ_5311 0x00000008 #define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a #define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 @@ -2088,7 +2104,7 @@ * * It's obvious from the code that 0x989c is the buffer register but * for the other special registers that we write to after sending each - * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers + * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers * for now. It's interesting that they are also used for some other operations. */ @@ -2244,6 +2260,8 @@ #define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) /*---[5111+]---*/ +#define AR5K_PHY_FRAME_CTL_WIN_LEN 0x00000003 /* Force window length (?) */ +#define AR5K_PHY_FRAME_CTL_WIN_LEN_S 0 #define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ #define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 #define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ @@ -2256,12 +2274,13 @@ #define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ #define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 #define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ -#define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ - AR5K_PHY_FRAME_CTL_TXURN_ERR | \ - AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ - AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ - AR5K_PHY_FRAME_CTL_PARITY_ERR | \ - AR5K_PHY_FRAME_CTL_TIMING_ERR +#define AR5K_PHY_FRAME_CTL_INI \ + (AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ + AR5K_PHY_FRAME_CTL_TXURN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ + AR5K_PHY_FRAME_CTL_PARITY_ERR | \ + AR5K_PHY_FRAME_CTL_TIMING_ERR) /* * PHY Tx Power adjustment register [5212A+] @@ -2278,22 +2297,22 @@ #define AR5K_PHY_RADAR 0x9954 #define AR5K_PHY_RADAR_ENABLE 0x00000001 #define AR5K_PHY_RADAR_DISABLE 0x00000000 -#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold +#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold 5-bits, units unknown {0..31} (? MHz ?) */ #define AR5K_PHY_RADAR_INBANDTHR_S 1 -#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold +#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold 6-bits, dBm range {0..63} in dBm units. */ #define AR5K_PHY_RADAR_PRSSI_THR_S 6 -#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold +#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold 6-bits, dBm range {0..63} in dBm units. */ #define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 -#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. +#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. 6-bits, dBm range {0..63} in dBm units. */ #define AR5K_PHY_RADAR_RSSI_THR_S 18 @@ -2336,7 +2355,7 @@ #define AR5K_PHY_RESTART_DIV_GC_S 18 /* - * RF Bus access request register (for synth-oly channel switching) + * RF Bus access request register (for synth-only channel switching) */ #define AR5K_PHY_RFBUS_REQ 0x997C #define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 @@ -2378,7 +2397,7 @@ */ #define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) -#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */ #define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) /* @@ -2558,3 +2577,28 @@ */ #define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280 #define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2)) + +/* + * Platform registers for WiSoC + */ +#define AR5K_AR5312_RESET 0xbc003020 +#define AR5K_AR5312_RESET_BB0_COLD 0x00000004 +#define AR5K_AR5312_RESET_BB1_COLD 0x00000200 +#define AR5K_AR5312_RESET_WMAC0 0x00002000 +#define AR5K_AR5312_RESET_BB0_WARM 0x00004000 +#define AR5K_AR5312_RESET_WMAC1 0x00020000 +#define AR5K_AR5312_RESET_BB1_WARM 0x00040000 + +#define AR5K_AR5312_ENABLE 0xbc003080 +#define AR5K_AR5312_ENABLE_WLAN0 0x00000001 +#define AR5K_AR5312_ENABLE_WLAN1 0x00000008 + +#define AR5K_AR2315_RESET 0xb1000004 +#define AR5K_AR2315_RESET_WMAC 0x00000001 +#define AR5K_AR2315_RESET_BB_WARM 0x00000002 + +#define AR5K_AR2315_AHB_ARB_CTL 0xb1000008 +#define AR5K_AR2315_AHB_ARB_CTL_WLAN 0x00000002 + +#define AR5K_AR2315_BYTESWAP 0xb100000c +#define AR5K_AR2315_BYTESWAP_WMAC 0x00000002 diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 5b179d01f97..a3399c4f13a 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -19,23 +19,52 @@ * */ -/*****************************\ - Reset functions and helpers -\*****************************/ +/****************************\ + Reset function and helpers +\****************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <asm/unaligned.h> -#include <linux/pci.h> /* To determine if a card is pci-e */ +#include <linux/pci.h> /* To determine if a card is pci-e */ #include <linux/log2.h> +#include <linux/platform_device.h> #include "ath5k.h" #include "reg.h" -#include "base.h" #include "debug.h" -/* - * Check if a register write has been completed + +/** + * DOC: Reset function and helpers + * + * Here we implement the main reset routine, used to bring the card + * to a working state and ready to receive. We also handle routines + * that don't fit on other places such as clock, sleep and power control + */ + + +/******************\ +* Helper functions * +\******************/ + +/** + * ath5k_hw_register_timeout() - Poll a register for a flag/field change + * @ah: The &struct ath5k_hw + * @reg: The register to read + * @flag: The flag/field to check on the register + * @val: The field value we expect (if we check a field) + * @is_set: Instead of checking if the flag got cleared, check if it got set + * + * Some registers contain flags that indicate that an operation is + * running. We use this function to poll these registers and check + * if these flags get cleared. We also use it to poll a register + * field (containing multiple flags) until it gets a specific value. + * + * Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0 */ -int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, +int +ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set) { int i; @@ -53,150 +82,319 @@ int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, return (i <= 0) ? -EAGAIN : 0; } + +/*************************\ +* Clock related functions * +\*************************/ + /** - * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 + * ath5k_hw_htoclock() - Translate usec to hw clock units + * @ah: The &struct ath5k_hw + * @usec: value in microseconds * - * @ah: the &struct ath5k_hw - * @channel: the currently set channel upon reset + * Translate usecs to hw clock units based on the current + * hw clock rate. + * + * Returns number of clock units + */ +unsigned int +ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) +{ + struct ath_common *common = ath5k_hw_common(ah); + return usec * common->clockrate; +} + +/** + * ath5k_hw_clocktoh() - Translate hw clock units to usec + * @ah: The &struct ath5k_hw + * @clock: value in hw clock units * - * Write the delta slope coefficient (used on pilot tracking ?) for OFDM - * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset(). + * Translate hw clock units to usecs based on the current + * hw clock rate. * - * Since delta slope is floating point we split it on its exponent and - * mantissa and provide these values on hw. + * Returns number of usecs + */ +unsigned int +ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) +{ + struct ath_common *common = ath5k_hw_common(ah); + return clock / common->clockrate; +} + +/** + * ath5k_hw_init_core_clock() - Initialize core clock + * @ah: The &struct ath5k_hw * - * For more infos i think this patent is related - * http://www.freepatentsonline.com/7184495.html + * Initialize core clock parameters (usec, usec32, latencies etc), + * based on current bwmode and chipset properties. */ -static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, - struct ieee80211_channel *channel) +static void +ath5k_hw_init_core_clock(struct ath5k_hw *ah) { - /* Get exponent and mantissa and set it */ - u32 coef_scaled, coef_exp, coef_man, - ds_coef_exp, ds_coef_man, clock; - - BUG_ON(!(ah->ah_version == AR5K_AR5212) || - !(channel->hw_value & CHANNEL_OFDM)); - - /* Get coefficient - * ALGO: coef = (5 * clock / carrier_freq) / 2 - * we scale coef by shifting clock value by 24 for - * better precision since we use integers */ - /* TODO: Half/quarter rate */ - clock = (channel->hw_value & CHANNEL_TURBO) ? 80 : 40; - coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq; - - /* Get exponent - * ALGO: coef_exp = 14 - highest set bit position */ - coef_exp = ilog2(coef_scaled); - - /* Doesn't make sense if it's zero*/ - if (!coef_scaled || !coef_exp) - return -EINVAL; + struct ieee80211_channel *channel = ah->ah_current_channel; + struct ath_common *common = ath5k_hw_common(ah); + u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs; - /* Note: we've shifted coef_scaled by 24 */ - coef_exp = 14 - (coef_exp - 24); + /* + * Set core clock frequency + */ + switch (channel->hw_value) { + case AR5K_MODE_11A: + clock = 40; + break; + case AR5K_MODE_11B: + clock = 22; + break; + case AR5K_MODE_11G: + default: + clock = 44; + break; + } + /* Use clock multiplier for non-default + * bwmode */ + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + clock *= 2; + break; + case AR5K_BWMODE_10MHZ: + clock /= 2; + break; + case AR5K_BWMODE_5MHZ: + clock /= 4; + break; + default: + break; + } - /* Get mantissa (significant digits) - * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */ - coef_man = coef_scaled + - (1 << (24 - coef_exp - 1)); + common->clockrate = clock; - /* Calculate delta slope coefficient exponent - * and mantissa (remove scaling) and set them on hw */ - ds_coef_man = coef_man >> (24 - coef_exp); - ds_coef_exp = coef_exp - 16; + /* + * Set USEC parameters + */ + /* Set USEC counter on PCU*/ + usec = clock - 1; + usec = AR5K_REG_SM(usec, AR5K_USEC_1); - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + /* Set usec duration on DCU */ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, + AR5K_DCU_GBL_IFS_MISC_USEC_DUR, + clock); + + /* Set 32MHz USEC counter */ + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF2413) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_radio == AR5K_RF2317)) + /* Remain on 40MHz clock ? */ + sclock = 40 - 1; + else + sclock = 32 - 1; + sclock = AR5K_REG_SM(sclock, AR5K_USEC_32); - return 0; -} + /* + * Set tx/rx latencies + */ + usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); + txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211); + /* + * Set default Tx frame to Tx data start delay + */ + txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; -/* - * index into rates for control rates, we can set it up like this because - * this is only used for AR5212 and we know it supports G mode - */ -static const unsigned int control_rates[] = - { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; + /* + * 5210 initvals don't include usec settings + * so we need to use magic values here for + * tx/rx latencies + */ + if (ah->ah_version == AR5K_AR5210) { + /* same for turbo */ + txlat = AR5K_INIT_TX_LATENCY_5210; + rxlat = AR5K_INIT_RX_LATENCY_5210; + } + + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + /* 5311 has different tx/rx latency masks + * from 5211, since we deal 5311 the same + * as 5211 when setting initvals, shift + * values here to their proper locations + * + * Note: Initvals indicate tx/rx/ latencies + * are the same for turbo mode */ + txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210); + rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210); + } else + switch (ah->ah_bwmode) { + case AR5K_BWMODE_10MHZ: + txlat = AR5K_REG_SM(txlat * 2, + AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ; + break; + case AR5K_BWMODE_5MHZ: + txlat = AR5K_REG_SM(txlat * 4, + AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ; + break; + case AR5K_BWMODE_40MHZ: + txlat = AR5K_INIT_TX_LAT_MIN; + rxlat = AR5K_REG_SM(rxlat / 2, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; + break; + default: + break; + } + + usec_reg = (usec | sclock | txlat | rxlat); + ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC); + + /* On 5112 set tx frame to tx data start delay */ + if (ah->ah_radio == AR5K_RF5112) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2, + AR5K_PHY_RF_CTL2_TXF2TXD_START, + txf2txs); + } +} /** - * ath5k_hw_write_rate_duration - fill rate code to duration table + * ath5k_hw_set_sleep_clock() - Setup sleep clock operation + * @ah: The &struct ath5k_hw + * @enable: Enable sleep clock operation (false to disable) * - * @ah: the &struct ath5k_hw - * @mode: one of enum ath5k_driver_mode - * - * Write the rate code to duration table upon hw reset. This is a helper for - * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on - * the hardware, based on current mode, for each rate. The rates which are - * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have - * different rate code so we write their value twice (one for long preample - * and one for short). + * If there is an external 32KHz crystal available, use it + * as ref. clock instead of 32/40MHz clock and baseband clocks + * to save power during sleep or restore normal 32/40MHz + * operation. * - * Note: Band doesn't matter here, if we set the values for OFDM it works - * on both a and g modes. So all we have to do is set values for all g rates - * that include all OFDM and CCK rates. If we operate in turbo or xr/half/ - * quarter rate mode, we need to use another set of bitrates (that's why we - * need the mode parameter) but we don't handle these proprietary modes yet. + * NOTE: When operating on 32KHz certain PHY registers (27 - 31, + * 123 - 127) require delay on access. */ -static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, - unsigned int mode) +static void +ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) { - struct ath5k_softc *sc = ah->ah_sc; - struct ieee80211_rate *rate; - unsigned int i; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 scal, spending, sclock; - /* Write rate duration table */ - for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { - u32 reg; - u16 tx_time; + /* Only set 32KHz settings if we have an external + * 32KHz crystal present */ + if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) || + AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) && + enable) { - rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; + /* 1 usec/cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1); + /* Set up tsf increment on each cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61); - /* Set ACK timeout */ - reg = AR5K_RATE_DUR(rate->hw_value); + /* Set baseband sleep control registers + * and sleep control rate */ + ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); - /* An ACK frame consists of 10 bytes. If you add the FCS, - * which ieee80211_generic_frame_duration() adds, - * its 14 bytes. Note we use the control rate and not the - * actual rate for this rate. See mac80211 tx.c - * ieee80211_duration() for a brief description of - * what rate we should choose to TX ACKs. */ - tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, - NULL, 10, rate)); + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + spending = 0x14; + else + spending = 0x18; + ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); - ath5k_hw_reg_write(ah, tx_time, reg); + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { + ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02); + } else { + ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03); + } - if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) - continue; + /* Enable sleep clock operation */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_EN); - /* - * We're not distinguishing short preamble here, - * This is true, all we'll get is a longer value here - * which is not necessarilly bad. We could use - * export ieee80211_frame_duration() but that needs to be - * fixed first to be properly used by mac802111 drivers: - * - * - remove erp stuff and let the routine figure ofdm - * erp rates - * - remove passing argument ieee80211_local as - * drivers don't have access to it - * - move drivers using ieee80211_generic_frame_duration() - * to this - */ - ath5k_hw_reg_write(ah, tx_time, - reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } else { + + /* Disable sleep clock operation and + * restore default parameters */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_EN); + + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0); + + /* Set DAC/ADC delays */ + ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); + ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); + + if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) + scal = AR5K_PHY_SCAL_32MHZ_2417; + else if (ee->ee_is_hb63) + scal = AR5K_PHY_SCAL_32MHZ_HB63; + else + scal = AR5K_PHY_SCAL_32MHZ; + ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); + + ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + spending = 0x14; + else + spending = 0x18; + ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); + + /* Set up tsf increment on each cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_radio == AR5K_RF2317)) + sclock = 40 - 1; + else + sclock = 32 - 1; + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, sclock); } } -/* - * Reset chipset + +/*********************\ +* Reset/Sleep control * +\*********************/ + +/** + * ath5k_hw_nic_reset() - Reset the various chipset units + * @ah: The &struct ath5k_hw + * @val: Mask to indicate what units to reset + * + * To reset the various chipset units we need to write + * the mask to AR5K_RESET_CTL and poll the register until + * all flags are cleared. + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) */ -static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +static int +ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) { int ret; u32 mask = val ? val : ~0U; @@ -210,7 +408,7 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); /* Wait at least 128 PCI clocks */ - udelay(15); + usleep_range(15, 20); if (ah->ah_version == AR5K_AR5210) { val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA @@ -235,10 +433,85 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) return ret; } -/* - * Sleep control +/** + * ath5k_hw_wisoc_reset() - Reset AHB chipset + * @ah: The &struct ath5k_hw + * @flags: Mask to indicate what units to reset + * + * Same as ath5k_hw_nic_reset but for AHB based devices + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) + */ +static int +ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) +{ + u32 mask = flags ? flags : ~0U; + u32 __iomem *reg; + u32 regval; + u32 val = 0; + + /* ah->ah_mac_srev is not available at this point yet */ + if (ah->devid >= AR5K_SREV_AR2315_R6) { + reg = (u32 __iomem *) AR5K_AR2315_RESET; + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR2315_RESET_WMAC; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR2315_RESET_BB_WARM; + } else { + reg = (u32 __iomem *) AR5K_AR5312_RESET; + if (to_platform_device(ah->dev)->id == 0) { + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR5312_RESET_WMAC0; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR5312_RESET_BB0_COLD | + AR5K_AR5312_RESET_BB0_WARM; + } else { + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR5312_RESET_WMAC1; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR5312_RESET_BB1_COLD | + AR5K_AR5312_RESET_BB1_WARM; + } + } + + /* Put BB/MAC into reset */ + regval = ioread32(reg); + iowrite32(regval | val, reg); + regval = ioread32(reg); + usleep_range(100, 150); + + /* Bring BB/MAC out of reset */ + iowrite32(regval & ~val, reg); + regval = ioread32(reg); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((flags & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return 0; +} + +/** + * ath5k_hw_set_power_mode() - Set power mode + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_power_mode + * @set_chip: Set to true to write sleep control register + * @sleep_duration: How much time the device is allowed to sleep + * when sleep logic is enabled (in 128 microsecond increments). + * + * This function is used to configure sleep policy and allowed + * sleep modes. For more information check out the sleep control + * register on reg.h and STA_ID1. + * + * Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid + * mode is requested. */ -static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, +static int +ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration) { unsigned int i; @@ -288,7 +561,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, AR5K_SLEEP_CTL); - udelay(15); + usleep_range(15, 20); for (i = 200; i > 0; i--) { /* Check if the chip did wake up */ @@ -297,7 +570,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, break; /* Wait a bit and retry */ - udelay(50); + usleep_range(50, 75); ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, AR5K_SLEEP_CTL); } @@ -318,26 +591,32 @@ commit: return 0; } -/* - * Put device on hold +/** + * ath5k_hw_on_hold() - Put device on hold + * @ah: The &struct ath5k_hw * - * Put MAC and Baseband on warm reset and - * keep that state (don't clean sleep control - * register). After this MAC and Baseband are - * disabled and a full reset is needed to come - * back. This way we save as much power as possible + * Put MAC and Baseband on warm reset and keep that state + * (don't clean sleep control register). After this MAC + * and Baseband are disabled and a full reset is needed + * to come back. This way we save as much power as possible * without putting the card on full sleep. + * + * Returns 0 on success or -EIO on error */ -int ath5k_hw_on_hold(struct ath5k_hw *ah) +int +ath5k_hw_on_hold(struct ath5k_hw *ah) { - struct pci_dev *pdev = ah->ah_sc->pdev; + struct pci_dev *pdev = ah->pdev; u32 bus_flags; int ret; + if (ath5k_get_bus_type(ah) == ATH_AHB) + return 0; + /* Make sure device is awake */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); + ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); return ret; } @@ -346,43 +625,50 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) * * Note: putting PCI core on warm reset on PCI-E cards * results card to hang and always return 0xffff... so - * we ingore that flag for PCI-E cards. On PCI cards + * we ignore that flag for PCI-E cards. On PCI cards * this flag gets cleared after 64 PCI clocks. */ - bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; + bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; if (ah->ah_version == AR5K_AR5210) { ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); - mdelay(2); + usleep_range(2000, 2500); } else { ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND | bus_flags); } if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to put device on warm reset\n"); + ATH5K_ERR(ah, "failed to put device on warm reset\n"); return -EIO; } /* ...wakeup again!*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to put device on hold\n"); + ATH5K_ERR(ah, "failed to put device on hold\n"); return ret; } return ret; } -/* +/** + * ath5k_hw_nic_wakeup() - Force card out of sleep + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * * Bring up MAC + PHY Chips and program PLL - * TODO: Half/Quarter rate support + * NOTE: Channel is NULL for the initial wakeup. + * + * Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos */ -int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) +int +ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) { - struct pci_dev *pdev = ah->ah_sc->pdev; + struct pci_dev *pdev = ah->pdev; u32 turbo, mode, clock, bus_flags; int ret; @@ -390,11 +676,13 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) mode = 0; clock = 0; - /* Wakeup the device */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); - return ret; + if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) { + /* Wakeup the device */ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); + return ret; + } } /* @@ -402,43 +690,53 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) * * Note: putting PCI core on warm reset on PCI-E cards * results card to hang and always return 0xffff... so - * we ingore that flag for PCI-E cards. On PCI cards + * we ignore that flag for PCI-E cards. On PCI cards * this flag gets cleared after 64 PCI clocks. */ - bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; + bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; if (ah->ah_version == AR5K_AR5210) { ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); - mdelay(2); + usleep_range(2000, 2500); } else { - ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | - AR5K_RESET_CTL_BASEBAND | bus_flags); + if (ath5k_get_bus_type(ah) == ATH_AHB) + ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND); + else + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); } if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); + ATH5K_ERR(ah, "failed to reset the MAC Chip\n"); return -EIO; } /* ...wakeup again!...*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); + ATH5K_ERR(ah, "failed to resume the MAC Chip\n"); return ret; } - /* ...clear reset control register and pull device out of - * warm reset */ - if (ath5k_hw_nic_reset(ah, 0)) { - ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); + /* ...reset configuration register on Wisoc ... + * ...clear reset control register and pull device out of + * warm reset on others */ + if (ath5k_get_bus_type(ah) == ATH_AHB) + ret = ath5k_hw_wisoc_reset(ah, 0); + else + ret = ath5k_hw_nic_reset(ah, 0); + + if (ret) { + ATH5K_ERR(ah, "failed to warm reset the MAC Chip\n"); return -EIO; } /* On initialization skip PLL programming since we don't have * a channel / mode set yet */ - if (initial) + if (!channel) return 0; if (ah->ah_version != AR5K_AR5210) { @@ -454,54 +752,62 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) clock = AR5K_PHY_PLL_RF5111; /*Zero*/ } - if (flags & CHANNEL_2GHZ) { + if (channel->band == IEEE80211_BAND_2GHZ) { mode |= AR5K_PHY_MODE_FREQ_2GHZ; clock |= AR5K_PHY_PLL_44MHZ; - if (flags & CHANNEL_CCK) { + if (channel->hw_value == AR5K_MODE_11B) { mode |= AR5K_PHY_MODE_MOD_CCK; - } else if (flags & CHANNEL_OFDM) { + } else { /* XXX Dynamic OFDM/CCK is not supported by the * AR5211 so we set MOD_OFDM for plain g (no * CCK headers) operation. We need to test * this, 5211 might support ofdm-only g after * all, there are also initial register values - * in the code for g mode (see initvals.c). */ + * in the code for g mode (see initvals.c). + */ if (ah->ah_version == AR5K_AR5211) mode |= AR5K_PHY_MODE_MOD_OFDM; else mode |= AR5K_PHY_MODE_MOD_DYN; - } else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; } - } else if (flags & CHANNEL_5GHZ) { - mode |= AR5K_PHY_MODE_FREQ_5GHZ; + } else if (channel->band == IEEE80211_BAND_5GHZ) { + mode |= (AR5K_PHY_MODE_FREQ_5GHZ | + AR5K_PHY_MODE_MOD_OFDM); + /* Different PLL setting for 5413 */ if (ah->ah_radio == AR5K_RF5413) clock = AR5K_PHY_PLL_40MHZ_5413; else clock |= AR5K_PHY_PLL_40MHZ; - - if (flags & CHANNEL_OFDM) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } } else { - ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); + ATH5K_ERR(ah, "invalid radio frequency mode\n"); return -EINVAL; } - if (flags & CHANNEL_TURBO) - turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; + /*XXX: Can bwmode be used with dynamic mode ? + * (I don't think it supports 44MHz) */ + /* On 2425 initvals TURBO_SHORT is not present */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { + turbo = AR5K_PHY_TURBO_MODE; + if (ah->ah_radio != AR5K_RF2425) + turbo |= AR5K_PHY_TURBO_SHORT; + } else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) { + if (ah->ah_radio == AR5K_RF5413) { + mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? + AR5K_PHY_MODE_HALF_RATE : + AR5K_PHY_MODE_QUARTER_RATE; + } else if (ah->ah_version == AR5K_AR5212) { + clock |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? + AR5K_PHY_PLL_HALF_RATE : + AR5K_PHY_PLL_QUARTER_RATE; + } + } + } else { /* Reset the device */ /* ...enable Atheros turbo mode if requested */ - if (flags & CHANNEL_TURBO) + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, AR5K_PHY_TURBO); } @@ -511,7 +817,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) /* ...update PLL if needed */ if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) { ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); - udelay(300); + usleep_range(300, 350); } /* ...set the PHY operating mode */ @@ -522,110 +828,24 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) return 0; } -/* - * If there is an external 32KHz crystal available, use it - * as ref. clock instead of 32/40MHz clock and baseband clocks - * to save power during sleep or restore normal 32/40MHz - * operation. - * - * XXX: When operating on 32KHz certain PHY registers (27 - 31, - * 123 - 127) require delay on access. - */ -static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 scal, spending, usec32; - - /* Only set 32KHz settings if we have an external - * 32KHz crystal present */ - if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) || - AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) && - enable) { - /* 1 usec/cycle */ - AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1); - /* Set up tsf increment on each cycle */ - AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61); - - /* Set baseband sleep control registers - * and sleep control rate */ - ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) - spending = 0x14; - else - spending = 0x18; - ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); +/**************************************\ +* Post-initvals register modifications * +\**************************************/ - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { - ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT); - ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL); - ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY); - AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02); - } else { - ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT); - ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL); - ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY); - AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03); - } - - /* Enable sleep clock operation */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_EN); - - } else { - - /* Disable sleep clock operation and - * restore default parameters */ - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_EN); - - AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_SLEEP_CLOCK_RATE, 0); - - ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); - ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); - - if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) - scal = AR5K_PHY_SCAL_32MHZ_2417; - else if (ee->ee_is_hb63) - scal = AR5K_PHY_SCAL_32MHZ_HB63; - else - scal = AR5K_PHY_SCAL_32MHZ; - ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); - - ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) - spending = 0x14; - else - spending = 0x18; - ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); - - if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413)) - usec32 = 39; - else - usec32 = 31; - AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32); - - AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); - } -} - -/* TODO: Half/Quarter rate */ -static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, +/** + * ath5k_hw_tweak_initval_settings() - Tweak initial settings + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Some settings are not handled on initvals, e.g. bwmode + * settings, some phy settings, workarounds etc that in general + * don't fit anywhere else or are too small to introduce a separate + * function for each one. So we have this function to handle + * them all during reset and complete card's initialization. + */ +static void +ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, struct ieee80211_channel *channel) { if (ah->ah_version == AR5K_AR5212 && @@ -663,22 +883,10 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_DCU_DBL_BUF_DIS); - /* Set DAC/ADC delays */ - if (ah->ah_version == AR5K_AR5212) { - u32 scal; - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) - scal = AR5K_PHY_SCAL_32MHZ_2417; - else if (ee->ee_is_hb63) - scal = AR5K_PHY_SCAL_32MHZ_HB63; - else - scal = AR5K_PHY_SCAL_32MHZ; - ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); - } - /* Set fast ADC */ if ((ah->ah_radio == AR5K_RF5413) || - (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { + (ah->ah_radio == AR5K_RF2317) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { u32 fast_adc = true; if (channel->center_freq == 2462 || @@ -698,7 +906,7 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, u32 data; ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, AR5K_PHY_CCKTXCTL); - if (channel->hw_value & CHANNEL_5GHZ) + if (channel->band == IEEE80211_BAND_5GHZ) data = 0xffb81020; else data = 0xffb80d20; @@ -706,33 +914,77 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, } if (ah->ah_mac_srev < AR5K_SREV_AR5211) { - u32 usec_reg; - /* 5311 has different tx/rx latency masks - * from 5211, since we deal 5311 the same - * as 5211 when setting initvals, shift - * values here to their proper locations */ - usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); - ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 | - AR5K_USEC_32 | - AR5K_USEC_TX_LATENCY_5211 | - AR5K_REG_SM(29, - AR5K_USEC_RX_LATENCY_5210)), - AR5K_USEC_5211); /* Clear QCU/DCU clock gating register */ ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT); /* Set DAC/ADC delays */ - ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311, + AR5K_PHY_SCAL); /* Enable PCU FIFO corruption ECO */ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, AR5K_DIAG_SW_ECO_ENABLE); } + + if (ah->ah_bwmode) { + /* Increase PHY switch and AGC settling time + * on turbo mode (ath5k_hw_commit_eeprom_settings + * will override settling time if available) */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_AGC, + AR5K_AGC_SETTLING_TURBO); + + /* XXX: Initvals indicate we only increase + * switch time on AR5212, 5211 and 5210 + * only change agc time (bug?) */ + if (ah->ah_version == AR5K_AR5212) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + AR5K_SWITCH_SETTLING_TURBO); + + if (ah->ah_version == AR5K_AR5210) { + /* Set Frame Control Register */ + ath5k_hw_reg_write(ah, + (AR5K_PHY_FRAME_CTL_INI | + AR5K_PHY_TURBO_MODE | + AR5K_PHY_TURBO_SHORT | 0x2020), + AR5K_PHY_FRAME_CTL_5210); + } + /* On 5413 PHY force window length for half/quarter rate*/ + } else if ((ah->ah_mac_srev >= AR5K_SREV_AR5424) && + (ah->ah_mac_srev <= AR5K_SREV_AR5414)) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL_5211, + AR5K_PHY_FRAME_CTL_WIN_LEN, + 3); + } + } else if (ah->ah_version == AR5K_AR5210) { + /* Set Frame Control Register for normal operation */ + ath5k_hw_reg_write(ah, (AR5K_PHY_FRAME_CTL_INI | 0x1020), + AR5K_PHY_FRAME_CTL_5210); + } } -static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, - struct ieee80211_channel *channel, u8 ee_mode) +/** + * ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Use settings stored on EEPROM to properly initialize the card + * based on various infos and per-mode calibration data. + */ +static void +ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; s16 cck_ofdm_pwr_delta; + u8 ee_mode; + + /* TODO: Add support for AR5210 EEPROM */ + if (ah->ah_version == AR5K_AR5210) + return; + + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); /* Adjust power delta for channel 14 */ if (channel->center_freq == 2484) @@ -746,7 +998,7 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, /* Set CCK to OFDM power delta on tx power * adjustment register */ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { - if (channel->hw_value == CHANNEL_G) + if (channel->hw_value == AR5K_MODE_11G) ath5k_hw_reg_write(ah, AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1), AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) | @@ -772,7 +1024,7 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), AR5K_PHY_NFTHRES); - if ((channel->hw_value & CHANNEL_TURBO) && + if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) && (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) { /* Switch settling time (Turbo) */ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, @@ -870,146 +1122,180 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE); } -/* - * Main reset function + +/*********************\ +* Main reset function * +\*********************/ + +/** + * ath5k_hw_reset() - The main reset function + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * @channel: The &struct ieee80211_channel + * @fast: Enable fast channel switching + * @skip_pcu: Skip pcu initialization + * + * This is the function we call each time we want to (re)initialize the + * card and pass new settings to hw. We also call it when hw runs into + * trouble to make it come back to a working state. + * + * Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO + * on failure. */ -int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, - struct ieee80211_channel *channel, bool change_channel) +int +ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, + struct ieee80211_channel *channel, bool fast, bool skip_pcu) { - struct ath_common *common = ath5k_hw_common(ah); - u32 s_seq[10], s_led[3], staid1_flags, tsf_up, tsf_lo; - u32 phy_tst1; - u8 mode, freq, ee_mode; + u32 s_seq[10], s_led[3], tsf_up, tsf_lo; + u8 mode; int i, ret; - ee_mode = 0; - staid1_flags = 0; tsf_up = 0; tsf_lo = 0; - freq = 0; mode = 0; /* - * Save some registers before a reset + * Sanity check for fast flag + * Fast channel change only available + * on AR2413/AR5413. */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { + if (fast && (ah->ah_radio != AR5K_RF2413) && + (ah->ah_radio != AR5K_RF5413)) + fast = false; - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - mode = AR5K_MODE_11A; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - mode = AR5K_MODE_11G; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - mode = AR5K_MODE_11B; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11B; - break; - case CHANNEL_T: - mode = AR5K_MODE_11A_TURBO; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_TG: - if (ah->ah_version == AR5K_AR5211) { - ATH5K_ERR(ah->ah_sc, - "TurboG mode not available on 5211"); - return -EINVAL; - } - mode = AR5K_MODE_11G_TURBO; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_XR: - if (ah->ah_version == AR5K_AR5211) { - ATH5K_ERR(ah->ah_sc, - "XR mode not available on 5211"); - return -EINVAL; - } - mode = AR5K_MODE_XR; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); + /* Disable sleep clock operation + * to avoid register access delay on certain + * PHY registers */ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_set_sleep_clock(ah, false); + + /* + * Stop PCU + */ + ath5k_hw_stop_rx_pcu(ah); + + /* + * Stop DMA + * + * Note: If DMA didn't stop continue + * since only a reset will fix it. + */ + ret = ath5k_hw_dma_stop(ah); + + /* RF Bus grant won't work if we have pending + * frames */ + if (ret && fast) { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "DMA didn't stop, falling back to normal reset\n"); + fast = false; + /* Non fatal, just continue with + * normal reset */ + ret = 0; + } + + mode = channel->hw_value; + switch (mode) { + case AR5K_MODE_11A: + break; + case AR5K_MODE_11G: + if (ah->ah_version <= AR5K_AR5211) { + ATH5K_ERR(ah, + "G mode not available on 5210/5211"); + return -EINVAL; + } + break; + case AR5K_MODE_11B: + if (ah->ah_version < AR5K_AR5211) { + ATH5K_ERR(ah, + "B mode not available on 5210"); return -EINVAL; } + break; + default: + ATH5K_ERR(ah, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } - if (change_channel) { - /* - * Save frame sequence count - * For revs. after Oahu, only save - * seq num for DCU 0 (Global seq num) - */ - if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + /* + * If driver requested fast channel change and DMA has stopped + * go on. If it fails continue with a normal reset. + */ + if (fast) { + ret = ath5k_hw_phy_init(ah, channel, mode, true); + if (ret) { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "fast chan change failed, falling back to normal reset\n"); + /* Non fatal, can happen eg. + * on mode change */ + ret = 0; + } else { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "fast chan change successful\n"); + return 0; + } + } - for (i = 0; i < 10; i++) - s_seq[i] = ath5k_hw_reg_read(ah, - AR5K_QUEUE_DCU_SEQNUM(i)); + /* + * Save some registers before a reset + */ + if (ah->ah_version != AR5K_AR5210) { + /* + * Save frame sequence count + * For revs. after Oahu, only save + * seq num for DCU 0 (Global seq num) + */ + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { - } else { - s_seq[0] = ath5k_hw_reg_read(ah, - AR5K_QUEUE_DCU_SEQNUM(0)); - } + for (i = 0; i < 10; i++) + s_seq[i] = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DCU_SEQNUM(i)); - /* TSF accelerates on AR5211 during reset - * As a workaround save it here and restore - * it later so that it's back in time after - * reset. This way it'll get re-synced on the - * next beacon without breaking ad-hoc. - * - * On AR5212 TSF is almost preserved across a - * reset so it stays back in time anyway and - * we don't have to save/restore it. - * - * XXX: Since this breaks power saving we have - * to disable power saving until we receive the - * next beacon, so we can resync beacon timers */ - if (ah->ah_version == AR5K_AR5211) { - tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32); - tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32); - } + } else { + s_seq[0] = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DCU_SEQNUM(0)); } - if (ah->ah_version == AR5K_AR5212) { - /* Restore normal 32/40MHz clock operation - * to avoid register access delay on certain - * PHY registers */ - ath5k_hw_set_sleep_clock(ah, false); - - /* Since we are going to write rf buffer - * check if we have any pending gain_F - * optimization settings */ - if (change_channel && ah->ah_rf_banks != NULL) - ath5k_hw_gainf_calibrate(ah); + /* TSF accelerates on AR5211 during reset + * As a workaround save it here and restore + * it later so that it's back in time after + * reset. This way it'll get re-synced on the + * next beacon without breaking ad-hoc. + * + * On AR5212 TSF is almost preserved across a + * reset so it stays back in time anyway and + * we don't have to save/restore it. + * + * XXX: Since this breaks power saving we have + * to disable power saving until we receive the + * next beacon, so we can resync beacon timers */ + if (ah->ah_version == AR5K_AR5211) { + tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32); } } + /*GPIOs*/ s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); - /* AR5K_STA_ID1 flags, only preserve antenna - * settings and ack/cts rate mode */ - staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & - (AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_DESC_ANTENNA | - AR5K_STA_ID1_RTS_DEF_ANTENNA | - AR5K_STA_ID1_ACKCTS_6MB | - AR5K_STA_ID1_BASE_RATE_11B | - AR5K_STA_ID1_SELFGEN_DEF_ANT); + + /* + * Since we are going to write rf buffer + * check if we have any pending gain_F + * optimization settings + */ + if (ah->ah_version == AR5K_AR5212 && + (ah->ah_radio <= AR5K_RF5112)) { + if (!fast && ah->ah_rf_banks != NULL) + ath5k_hw_gainf_calibrate(ah); + } /* Wakeup the device */ - ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); + ret = ath5k_hw_nic_wakeup(ah, channel); if (ret) return ret; @@ -1021,121 +1307,42 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, AR5K_PHY(0)); /* Write initial settings */ - ret = ath5k_hw_write_initvals(ah, mode, change_channel); + ret = ath5k_hw_write_initvals(ah, mode, skip_pcu); if (ret) return ret; + /* Initialize core clock settings */ + ath5k_hw_init_core_clock(ah); + /* - * 5211/5212 Specific + * Tweak initval settings for revised + * chipsets and add some more config + * bits */ - if (ah->ah_version != AR5K_AR5210) { - - /* - * Write initial RF gain settings - * This should work for both 5111/5112 - */ - ret = ath5k_hw_rfgain_init(ah, freq); - if (ret) - return ret; + ath5k_hw_tweak_initval_settings(ah, channel); - mdelay(1); + /* Commit values from EEPROM */ + ath5k_hw_commit_eeprom_settings(ah, channel); - /* - * Tweak initval settings for revised - * chipsets and add some more config - * bits - */ - ath5k_hw_tweak_initval_settings(ah, channel); - - /* - * Set TX power - */ - ret = ath5k_hw_txpower(ah, channel, ee_mode, - ah->ah_txpower.txp_max_pwr / 2); - if (ret) - return ret; - - /* Write rate duration table only on AR5212 and if - * virtual interface has already been brought up - * XXX: rethink this after new mode changes to - * mac80211 are integrated */ - if (ah->ah_version == AR5K_AR5212 && - ah->ah_sc->nvifs) - ath5k_hw_write_rate_duration(ah, mode); - - /* - * Write RF buffer - */ - ret = ath5k_hw_rfregs_init(ah, channel, mode); - if (ret) - return ret; - - - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - - /* Spur info is available only from EEPROM versions - * greater than 5.3, but the EEPROM routines will use - * static values for older versions */ - if (ah->ah_mac_srev >= AR5K_SREV_AR5424) - ath5k_hw_set_spur_mitigation_filter(ah, - channel); - } - - /*Enable/disable 802.11b mode on 5111 - (enable 2111 frequency converter + CCK)*/ - if (ah->ah_radio == AR5K_RF5111) { - if (mode == AR5K_MODE_11B) - AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - } - - /* Commit values from EEPROM */ - ath5k_hw_commit_eeprom_settings(ah, channel, ee_mode); - - } else { - /* - * For 5210 we do all initialization using - * initvals, so we don't have to modify - * any settings (5210 also only supports - * a/aturbo modes) - */ - mdelay(1); - /* Disable phy and wait */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - mdelay(1); - } /* * Restore saved values */ - /*DCU/Antenna selection not available on 5210*/ + /* Seqnum, TSF */ if (ah->ah_version != AR5K_AR5210) { + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + for (i = 0; i < 10; i++) + ath5k_hw_reg_write(ah, s_seq[i], + AR5K_QUEUE_DCU_SEQNUM(i)); + } else { + ath5k_hw_reg_write(ah, s_seq[0], + AR5K_QUEUE_DCU_SEQNUM(0)); + } - if (change_channel) { - if (ah->ah_mac_srev < AR5K_SREV_AR5211) { - for (i = 0; i < 10; i++) - ath5k_hw_reg_write(ah, s_seq[i], - AR5K_QUEUE_DCU_SEQNUM(i)); - } else { - ath5k_hw_reg_write(ah, s_seq[0], - AR5K_QUEUE_DCU_SEQNUM(0)); - } - - - if (ah->ah_version == AR5K_AR5211) { - ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32); - ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32); - } + if (ah->ah_version == AR5K_AR5211) { + ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32); + ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32); } } @@ -1146,209 +1353,45 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); - /* Restore sta_id flags and preserve our mac address*/ - ath5k_hw_reg_write(ah, - get_unaligned_le32(common->macaddr), - AR5K_STA_ID0); - ath5k_hw_reg_write(ah, - staid1_flags | get_unaligned_le16(common->macaddr + 4), - AR5K_STA_ID1); - - /* - * Configure PCU + * Initialize PCU */ - - /* Restore bssid and bssid mask */ - ath5k_hw_set_bssid(ah); - - /* Set PCU config */ - ath5k_hw_set_opmode(ah, op_mode); - - /* Clear any pending interrupts - * PISR/SISR Not available on 5210 */ - if (ah->ah_version != AR5K_AR5210) - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); - - /* Set RSSI/BRSSI thresholds - * - * Note: If we decide to set this value - * dynamically, keep in mind that when AR5K_RSSI_THR - * register is read, it might return 0x40 if we haven't - * written anything to it. Also, BMISS RSSI threshold is zeroed. - * So doing a save/restore procedure here isn't the right - * choice. Instead, store it in ath5k_hw */ - ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES | - AR5K_TUNE_BMISS_THRES << - AR5K_RSSI_THR_BMISS_S), - AR5K_RSSI_THR); - - /* MIC QoS support */ - if (ah->ah_mac_srev >= AR5K_SREV_AR2413) { - ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL); - ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL); - } - - /* QoS NOACK Policy */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, - AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) | - AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) | - AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET), - AR5K_QOS_NOACK); - } - + ath5k_hw_pcu_init(ah, op_mode); /* - * Configure PHY + * Initialize PHY */ - - /* Set channel on PHY */ - ret = ath5k_hw_channel(ah, channel); - if (ret) + ret = ath5k_hw_phy_init(ah, channel, mode, false); + if (ret) { + ATH5K_ERR(ah, + "failed to initialize PHY (%i) !\n", ret); return ret; - - /* - * Enable the PHY and wait until completion - * This includes BaseBand and Synthesizer - * activation. - */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - - /* - * On 5211+ read activation -> rx delay - * and use it. - * - * TODO: Half/quarter rate support - */ - if (ah->ah_version != AR5K_AR5210) { - u32 delay; - delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - delay = (channel->hw_value & CHANNEL_CCK) ? - ((delay << 2) / 22) : (delay / 10); - - udelay(100 + (2 * delay)); - } else { - mdelay(1); - } - - /* - * Perform ADC test to see if baseband is ready - * Set TX hold and check ADC test register - */ - phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); } - ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); - - /* - * Start automatic gain control calibration - * - * During AGC calibration RX path is re-routed to - * a power detector so we don't receive anything. - * - * This method is used to calibrate some static offsets - * used together with on-the fly I/Q calibration (the - * one performed via ath5k_hw_phy_calibrate), which doesn't - * interrupt rx path. - * - * While rx path is re-routed to the power detector we also - * start a noise floor calibration to measure the - * card's noise floor (the noise we measure when we are not - * transmitting or receiving anything). - * - * If we are in a noisy environment, AGC calibration may time - * out and/or noise floor calibration might timeout. - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF); - - /* At the same time start I/Q calibration for QAM constellation - * -no need for CCK- */ - ah->ah_calibration = false; - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - - /* Wait for gain calibration to finish (we check for I/Q calibration - * during ath5k_phy_calibrate) */ - if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", - channel->center_freq); - } - - /* Restore antenna mode */ - ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); - - /* Restore slot time and ACK timeouts */ - if (ah->ah_coverage_class > 0) - ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class); /* * Configure QCUs/DCUs */ + ret = ath5k_hw_init_queues(ah); + if (ret) + return ret; - /* TODO: HW Compression support for data queues */ - /* TODO: Burst prefetch for data queues */ /* - * Reset queues and start beacon timers at the end of the reset routine - * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping - * Note: If we want we can assign multiple qcus on one dcu. + * Initialize DMA/Interrupts */ - for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { - ret = ath5k_hw_reset_tx_queue(ah, i); - if (ret) { - ATH5K_ERR(ah->ah_sc, - "failed to reset TX queue #%d\n", i); - return ret; - } - } + ath5k_hw_dma_init(ah); /* - * Configure DMA/Interrupts - */ - - /* - * Set Rx/Tx DMA Configuration - * - * Set standard DMA size (128). Note that - * a DMA size of 512 causes rx overruns and tx errors - * on pci-e cards (tested on 5424 but since rx overruns - * also occur on 5416/5418 with madwifi we set 128 - * for all PCI-E cards to be safe). - * - * XXX: need to check 5210 for this - * TODO: Check out tx triger level, it's always 64 on dumps but I - * guess we can tweak it and see how it goes ;-) - */ - if (ah->ah_version != AR5K_AR5210) { - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B); - AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, - AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B); - } - - /* Pre-enable interrupts on 5211/5212*/ - if (ah->ah_version != AR5K_AR5210) - ath5k_hw_set_imr(ah, ah->ah_imr); - - /* Enable 32KHz clock function for AR5212+ chips + * Enable 32KHz clock function for AR5212+ chips * Set clocks to 32KHz operation and use an * external 32KHz crystal when sleeping if one - * exists */ - if (ah->ah_version == AR5K_AR5212 && + * exists. + * Disabled by default because it is also disabled in + * other drivers and it is known to cause stability + * issues on some devices + */ + if (ah->ah_use_32khz_clock && ah->ah_version == AR5K_AR5212 && op_mode != NL80211_IFTYPE_AP) ath5k_hw_set_sleep_clock(ah, true); diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h index 3ac4cff4239..aed34d9954c 100644 --- a/drivers/net/wireless/ath/ath5k/rfbuffer.h +++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h @@ -18,7 +18,9 @@ */ -/* +/** + * DOC: RF Buffer registers + * * There are some special registers on the RF chip * that control various operation settings related mostly to * the analog parts (channel, gain adjustment etc). @@ -44,43 +46,68 @@ */ -/* +/** + * struct ath5k_ini_rfbuffer - Initial RF Buffer settings + * @rfb_bank: RF Bank number + * @rfb_ctrl_register: RF Buffer control register + * @rfb_mode_data: RF Buffer data for each mode + * * Struct to hold default mode specific RF - * register values (RF Banks) + * register values (RF Banks) for each chip. */ struct ath5k_ini_rfbuffer { - u8 rfb_bank; /* RF Bank number */ - u16 rfb_ctrl_register; /* RF Buffer control register */ - u32 rfb_mode_data[5]; /* RF Buffer data for each mode */ + u8 rfb_bank; + u16 rfb_ctrl_register; + u32 rfb_mode_data[3]; }; -/* +/** + * struct ath5k_rfb_field - An RF Buffer field (register/value) + * @len: Field length + * @pos: Offset on the raw packet + * @col: Used for shifting + * * Struct to hold RF Buffer field * infos used to access certain RF * analog registers */ struct ath5k_rfb_field { - u8 len; /* Field length */ - u16 pos; /* Offset on the raw packet */ - u8 col; /* Column -used for shifting */ + u8 len; + u16 pos; + u8 col; }; -/* - * RF analog register definition +/** + * struct ath5k_rf_reg - RF analog register definition + * @bank: RF Buffer Bank number + * @index: Register's index on ath5k_rf_regx_idx + * @field: The &struct ath5k_rfb_field + * + * We use this struct to define the set of RF registers + * on each chip that we want to tweak. Some RF registers + * are common between different chip versions so this saves + * us space and complexity because we can refer to an rf + * register by it's index no matter what chip we work with + * as long as it has that register. */ struct ath5k_rf_reg { - u8 bank; /* RF Buffer Bank number */ - u8 index; /* Register's index on rf_regs_idx */ - struct ath5k_rfb_field field; /* RF Buffer field for this register */ + u8 bank; + u8 index; + struct ath5k_rfb_field field; }; -/* Map RF registers to indexes +/** + * enum ath5k_rf_regs_idx - Map RF registers to indexes + * * We do this to handle common bits and make our * life easier by using an index for each register - * instead of a full rfb_field */ + * instead of a full rfb_field + */ enum ath5k_rf_regs_idx { + /* BANK 2 */ + AR5K_RF_TURBO = 0, /* BANK 6 */ - AR5K_RF_OB_2GHZ = 0, + AR5K_RF_OB_2GHZ, AR5K_RF_OB_5GHZ, AR5K_RF_DB_2GHZ, AR5K_RF_DB_5GHZ, @@ -134,6 +161,9 @@ enum ath5k_rf_regs_idx { * RF5111 (Sombrero) * \*******************/ +/* BANK 2 len pos col */ +#define AR5K_RF5111_RF_TURBO { 1, 3, 0 } + /* BANK 6 len pos col */ #define AR5K_RF5111_OB_2GHZ { 3, 119, 0 } #define AR5K_RF5111_DB_2GHZ { 3, 122, 0 } @@ -158,6 +188,7 @@ enum ath5k_rf_regs_idx { #define AR5K_RF5111_MAX_TIME { 2, 49, 0 } static const struct ath5k_rf_reg rf_regs_5111[] = { + {2, AR5K_RF_TURBO, AR5K_RF5111_RF_TURBO}, {6, AR5K_RF_OB_2GHZ, AR5K_RF5111_OB_2GHZ}, {6, AR5K_RF_DB_2GHZ, AR5K_RF5111_DB_2GHZ}, {6, AR5K_RF_OB_5GHZ, AR5K_RF5111_OB_5GHZ}, @@ -177,97 +208,52 @@ static const struct ath5k_rf_reg rf_regs_5111[] = { /* Default mode specific settings */ static const struct ath5k_ini_rfbuffer rfb_5111[] = { - { 0, 0x989c, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } }, - { 0, 0x989c, - { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } }, - { 0, 0x98d4, - { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } }, - { 1, 0x98d4, - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d4, - { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } }, - { 3, 0x98d8, - { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, - { 6, 0x989c, - { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } }, - { 6, 0x989c, - { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } }, - { 6, 0x989c, - { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } }, - { 6, 0x989c, - { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } }, - { 6, 0x989c, - { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } }, - { 6, 0x98d4, - { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } }, - { 7, 0x989c, - { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } }, - { 7, 0x989c, - { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } }, - { 7, 0x989c, - { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, - { 7, 0x989c, - { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } }, - { 7, 0x989c, - { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } }, - { 7, 0x989c, - { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } }, - { 7, 0x989c, - { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } }, + /* BANK / C.R. A/XR B G */ + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00380000, 0x00380000, 0x00380000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x000000c0, 0x00000080 } }, + { 0, 0x989c, { 0x000400f9, 0x000400ff, 0x000400fd } }, + { 0, 0x98d4, { 0x00000000, 0x00000004, 0x00000004 } }, + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d4, { 0x00000010, 0x00000010, 0x00000010 } }, + { 3, 0x98d8, { 0x00601068, 0x00601068, 0x00601068 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, { 0x04000000, 0x04000000, 0x04000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x0a000000, 0x00000000 } }, + { 6, 0x989c, { 0x003800c0, 0x023800c0, 0x003800c0 } }, + { 6, 0x989c, { 0x00020006, 0x00000006, 0x00020006 } }, + { 6, 0x989c, { 0x00000089, 0x00000089, 0x00000089 } }, + { 6, 0x989c, { 0x000000a0, 0x000000a0, 0x000000a0 } }, + { 6, 0x989c, { 0x00040007, 0x00040007, 0x00040007 } }, + { 6, 0x98d4, { 0x0000001a, 0x0000001a, 0x0000001a } }, + { 7, 0x989c, { 0x00000040, 0x00000040, 0x00000040 } }, + { 7, 0x989c, { 0x00000010, 0x00000010, 0x00000010 } }, + { 7, 0x989c, { 0x00000008, 0x00000008, 0x00000008 } }, + { 7, 0x989c, { 0x0000004f, 0x0000004f, 0x0000004f } }, + { 7, 0x989c, { 0x000000f1, 0x00000061, 0x000000f1 } }, + { 7, 0x989c, { 0x0000904f, 0x0000904c, 0x0000904f } }, + { 7, 0x989c, { 0x0000125a, 0x0000129a, 0x0000125a } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000f, 0x0000000e } }, }; @@ -276,6 +262,9 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = { * RF5112/RF2112 (Derby) * \***********************/ +/* BANK 2 (Common) len pos col */ +#define AR5K_RF5112X_RF_TURBO { 1, 1, 2 } + /* BANK 7 (Common) len pos col */ #define AR5K_RF5112X_GAIN_I { 6, 14, 0 } #define AR5K_RF5112X_MIXVGA_OVR { 1, 36, 0 } @@ -290,7 +279,7 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = { /* RFX112 (Derby 1) */ -/* BANK 6 len pos col */ +/* BANK 6 len pos col */ #define AR5K_RF5112_OB_2GHZ { 3, 269, 0 } #define AR5K_RF5112_DB_2GHZ { 3, 272, 0 } @@ -307,6 +296,7 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = { #define AR5K_RF5112_PWD(_n) { 1, (302 - _n), 3 } static const struct ath5k_rf_reg rf_regs_5112[] = { + {2, AR5K_RF_TURBO, AR5K_RF5112X_RF_TURBO}, {6, AR5K_RF_OB_2GHZ, AR5K_RF5112_OB_2GHZ}, {6, AR5K_RF_DB_2GHZ, AR5K_RF5112_DB_2GHZ}, {6, AR5K_RF_OB_5GHZ, AR5K_RF5112_OB_5GHZ}, @@ -335,115 +325,61 @@ static const struct ath5k_rf_reg rf_regs_5112[] = { /* Default mode specific settings */ static const struct ath5k_ini_rfbuffer rfb_5112[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, - { 3, 0x98dc, - { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, - { 6, 0x989c, - { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } }, - { 6, 0x989c, - { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } }, - { 6, 0x989c, - { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } }, - { 6, 0x989c, - { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } }, - { 6, 0x989c, - { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, - { 6, 0x989c, - { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } }, - { 6, 0x989c, - { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } }, - { 6, 0x989c, - { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, - { 6, 0x989c, - { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } }, - { 6, 0x989c, - { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } }, - { 6, 0x989c, - { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, - { 6, 0x989c, - { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } }, - { 6, 0x989c, - { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } }, - { 6, 0x989c, - { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } }, - { 6, 0x989c, - { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } }, - { 6, 0x989c, - { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } }, - { 6, 0x989c, - { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } }, - { 6, 0x989c, - { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } }, - { 6, 0x989c, - { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } }, - { 6, 0x989c, - { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } }, - { 6, 0x989c, - { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } }, - { 6, 0x98d0, - { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } }, - { 7, 0x989c, - { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, - { 7, 0x989c, - { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, - { 7, 0x989c, - { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } }, - { 7, 0x989c, - { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, - { 7, 0x989c, - { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } }, - { 7, 0x989c, - { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, - { 7, 0x989c, - { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, - { 7, 0x989c, - { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } }, - { 7, 0x989c, - { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } }, - { 7, 0x989c, - { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, - { 7, 0x989c, - { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, - { 7, 0x989c, - { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, - { 7, 0x98c4, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x03060408, 0x03060408, 0x03060408 } }, + { 3, 0x98dc, { 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, + { 6, 0x989c, { 0x00a00000, 0x00a00000, 0x00a00000 } }, + { 6, 0x989c, { 0x000a0000, 0x000a0000, 0x000a0000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00660000, 0x00660000, 0x00660000 } }, + { 6, 0x989c, { 0x00db0000, 0x00db0000, 0x00db0000 } }, + { 6, 0x989c, { 0x00f10000, 0x00f10000, 0x00f10000 } }, + { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x008b0000, 0x008b0000, 0x008b0000 } }, + { 6, 0x989c, { 0x00600000, 0x00600000, 0x00600000 } }, + { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, { 0x00840000, 0x00840000, 0x00840000 } }, + { 6, 0x989c, { 0x00640000, 0x00640000, 0x00640000 } }, + { 6, 0x989c, { 0x00200000, 0x00200000, 0x00200000 } }, + { 6, 0x989c, { 0x00240000, 0x00240000, 0x00240000 } }, + { 6, 0x989c, { 0x00250000, 0x00250000, 0x00250000 } }, + { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, { 0x00510000, 0x00510000, 0x00510000 } }, + { 6, 0x989c, { 0x1c040000, 0x1c040000, 0x1c040000 } }, + { 6, 0x989c, { 0x000a0000, 0x000a0000, 0x000a0000 } }, + { 6, 0x989c, { 0x00a10000, 0x00a10000, 0x00a10000 } }, + { 6, 0x989c, { 0x00400000, 0x00400000, 0x00400000 } }, + { 6, 0x989c, { 0x03090000, 0x03090000, 0x03090000 } }, + { 6, 0x989c, { 0x06000000, 0x06000000, 0x06000000 } }, + { 6, 0x989c, { 0x000000b0, 0x000000a8, 0x000000a8 } }, + { 6, 0x989c, { 0x0000002e, 0x0000002e, 0x0000002e } }, + { 6, 0x989c, { 0x006c4a41, 0x006c4af1, 0x006c4a61 } }, + { 6, 0x989c, { 0x0050892a, 0x0050892b, 0x0050892b } }, + { 6, 0x989c, { 0x00842400, 0x00842400, 0x00842400 } }, + { 6, 0x989c, { 0x00c69200, 0x00c69200, 0x00c69200 } }, + { 6, 0x98d0, { 0x0002000c, 0x0002000c, 0x0002000c } }, + { 7, 0x989c, { 0x00000094, 0x00000094, 0x00000094 } }, + { 7, 0x989c, { 0x00000091, 0x00000091, 0x00000091 } }, + { 7, 0x989c, { 0x0000000a, 0x00000012, 0x00000012 } }, + { 7, 0x989c, { 0x00000080, 0x00000080, 0x00000080 } }, + { 7, 0x989c, { 0x000000c1, 0x000000c1, 0x000000c1 } }, + { 7, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } }, + { 7, 0x989c, { 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, 0x989c, { 0x00000022, 0x00000022, 0x00000022 } }, + { 7, 0x989c, { 0x00000092, 0x00000092, 0x00000092 } }, + { 7, 0x989c, { 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, 0x989c, { 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, 0x989c, { 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, 0x98c4, { 0x00000003, 0x00000003, 0x00000003 } }, }; /* RFX112A (Derby 2) */ @@ -477,6 +413,7 @@ static const struct ath5k_ini_rfbuffer rfb_5112[] = { #define AR5K_RF5112A_XB5_LVL { 2, 3, 3 } static const struct ath5k_rf_reg rf_regs_5112a[] = { + {2, AR5K_RF_TURBO, AR5K_RF5112X_RF_TURBO}, {6, AR5K_RF_OB_2GHZ, AR5K_RF5112A_OB_2GHZ}, {6, AR5K_RF_DB_2GHZ, AR5K_RF5112A_DB_2GHZ}, {6, AR5K_RF_OB_5GHZ, AR5K_RF5112A_OB_5GHZ}, @@ -515,119 +452,63 @@ static const struct ath5k_rf_reg rf_regs_5112a[] = { /* Default mode specific settings */ static const struct ath5k_ini_rfbuffer rfb_5112a[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, - { 3, 0x98dc, - { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, 0x989c, - { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } }, - { 6, 0x989c, - { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } }, - { 6, 0x989c, - { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } }, - { 6, 0x989c, - { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } }, - { 6, 0x989c, - { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } }, - { 6, 0x989c, - { 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000 } }, - { 6, 0x989c, - { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x02190000, 0x02190000, 0x02190000, 0x02190000, 0x02190000 } }, - { 6, 0x989c, - { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, - { 6, 0x989c, - { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } }, - { 6, 0x989c, - { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } }, - { 6, 0x989c, - { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } }, - { 6, 0x989c, - { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } }, - { 6, 0x989c, - { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } }, - { 6, 0x989c, - { 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080 } }, - { 6, 0x989c, - { 0x00270019, 0x00270019, 0x00270019, 0x00270019, 0x00270019 } }, - { 6, 0x989c, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } }, - { 6, 0x989c, - { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } }, - { 6, 0x989c, - { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } }, - { 6, 0x989c, - { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } }, - { 6, 0x989c, - { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } }, - { 6, 0x98d8, - { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } }, - { 7, 0x989c, - { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, - { 7, 0x989c, - { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, - { 7, 0x989c, - { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } }, - { 7, 0x989c, - { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, - { 7, 0x989c, - { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } }, - { 7, 0x989c, - { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, - { 7, 0x989c, - { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, - { 7, 0x989c, - { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } }, - { 7, 0x989c, - { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } }, - { 7, 0x989c, - { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, - { 7, 0x989c, - { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, - { 7, 0x989c, - { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, - { 7, 0x98c4, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x03060408, 0x03060408, 0x03060408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x0f000000, 0x0f000000, 0x0f000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00800000, 0x00800000, 0x00800000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00010000, 0x00010000, 0x00010000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00180000, 0x00180000, 0x00180000 } }, + { 6, 0x989c, { 0x00600000, 0x006e0000, 0x006e0000 } }, + { 6, 0x989c, { 0x00c70000, 0x00c70000, 0x00c70000 } }, + { 6, 0x989c, { 0x004b0000, 0x004b0000, 0x004b0000 } }, + { 6, 0x989c, { 0x04480000, 0x04480000, 0x04480000 } }, + { 6, 0x989c, { 0x004c0000, 0x004c0000, 0x004c0000 } }, + { 6, 0x989c, { 0x00e40000, 0x00e40000, 0x00e40000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x043f0000, 0x043f0000, 0x043f0000 } }, + { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, { 0x02190000, 0x02190000, 0x02190000 } }, + { 6, 0x989c, { 0x00240000, 0x00240000, 0x00240000 } }, + { 6, 0x989c, { 0x00b40000, 0x00b40000, 0x00b40000 } }, + { 6, 0x989c, { 0x00990000, 0x00990000, 0x00990000 } }, + { 6, 0x989c, { 0x00500000, 0x00500000, 0x00500000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, { 0xc0320000, 0xc0320000, 0xc0320000 } }, + { 6, 0x989c, { 0x01740000, 0x01740000, 0x01740000 } }, + { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, { 0x86280000, 0x86280000, 0x86280000 } }, + { 6, 0x989c, { 0x31840000, 0x31840000, 0x31840000 } }, + { 6, 0x989c, { 0x00f20080, 0x00f20080, 0x00f20080 } }, + { 6, 0x989c, { 0x00270019, 0x00270019, 0x00270019 } }, + { 6, 0x989c, { 0x00000003, 0x00000003, 0x00000003 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x000000b2, 0x000000b2, 0x000000b2 } }, + { 6, 0x989c, { 0x00b02084, 0x00b02084, 0x00b02084 } }, + { 6, 0x989c, { 0x004125a4, 0x004125a4, 0x004125a4 } }, + { 6, 0x989c, { 0x00119220, 0x00119220, 0x00119220 } }, + { 6, 0x989c, { 0x001a4800, 0x001a4800, 0x001a4800 } }, + { 6, 0x98d8, { 0x000b0230, 0x000b0230, 0x000b0230 } }, + { 7, 0x989c, { 0x00000094, 0x00000094, 0x00000094 } }, + { 7, 0x989c, { 0x00000091, 0x00000091, 0x00000091 } }, + { 7, 0x989c, { 0x00000012, 0x00000012, 0x00000012 } }, + { 7, 0x989c, { 0x00000080, 0x00000080, 0x00000080 } }, + { 7, 0x989c, { 0x000000d9, 0x000000d9, 0x000000d9 } }, + { 7, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } }, + { 7, 0x989c, { 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, 0x989c, { 0x000000a2, 0x000000a2, 0x000000a2 } }, + { 7, 0x989c, { 0x00000052, 0x00000052, 0x00000052 } }, + { 7, 0x989c, { 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, 0x989c, { 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, 0x989c, { 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, 0x98c4, { 0x00000003, 0x00000003, 0x00000003 } }, }; @@ -636,11 +517,15 @@ static const struct ath5k_ini_rfbuffer rfb_5112a[] = { * RF2413 (Griffin) * \******************/ -/* BANK 6 len pos col */ +/* BANK 2 len pos col */ +#define AR5K_RF2413_RF_TURBO { 1, 1, 2 } + +/* BANK 6 len pos col */ #define AR5K_RF2413_OB_2GHZ { 3, 168, 0 } #define AR5K_RF2413_DB_2GHZ { 3, 165, 0 } static const struct ath5k_rf_reg rf_regs_2413[] = { + {2, AR5K_RF_TURBO, AR5K_RF2413_RF_TURBO}, {6, AR5K_RF_OB_2GHZ, AR5K_RF2413_OB_2GHZ}, {6, AR5K_RF_DB_2GHZ, AR5K_RF2413_DB_2GHZ}, }; @@ -649,73 +534,40 @@ static const struct ath5k_rf_reg rf_regs_2413[] = { * XXX: a/aTurbo ??? */ static const struct ath5k_ini_rfbuffer rfb_2413[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } }, - { 3, 0x98dc, - { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, 0x989c, - { 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x03000000, 0x03000000, 0x03000000, 0x03000000, 0x03000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x40400000, 0x40400000, 0x40400000, 0x40400000, 0x40400000 } }, - { 6, 0x989c, - { 0x65050000, 0x65050000, 0x65050000, 0x65050000, 0x65050000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00420000, 0x00420000, 0x00420000, 0x00420000, 0x00420000 } }, - { 6, 0x989c, - { 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000 } }, - { 6, 0x989c, - { 0x00030000, 0x00030000, 0x00030000, 0x00030000, 0x00030000 } }, - { 6, 0x989c, - { 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000 } }, - { 6, 0x989c, - { 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000 } }, - { 6, 0x989c, - { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } }, - { 6, 0x989c, - { 0x04220000, 0x04220000, 0x04220000, 0x04220000, 0x04220000 } }, - { 6, 0x989c, - { 0x00230018, 0x00230018, 0x00230018, 0x00230018, 0x00230018 } }, - { 6, 0x989c, - { 0x00280000, 0x00280000, 0x00280060, 0x00280060, 0x00280060 } }, - { 6, 0x989c, - { 0x005000c0, 0x005000c0, 0x005000c3, 0x005000c3, 0x005000c3 } }, - { 6, 0x989c, - { 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f } }, - { 6, 0x989c, - { 0x00000458, 0x00000458, 0x00000458, 0x00000458, 0x00000458 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000 } }, - { 6, 0x98d8, - { 0x00400230, 0x00400230, 0x00400230, 0x00400230, 0x00400230 } }, - { 7, 0x989c, - { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, - { 7, 0x989c, - { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0xf0000000, 0xf0000000, 0xf0000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x03000000, 0x03000000, 0x03000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x40400000, 0x40400000, 0x40400000 } }, + { 6, 0x989c, { 0x65050000, 0x65050000, 0x65050000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00420000, 0x00420000, 0x00420000 } }, + { 6, 0x989c, { 0x00b50000, 0x00b50000, 0x00b50000 } }, + { 6, 0x989c, { 0x00030000, 0x00030000, 0x00030000 } }, + { 6, 0x989c, { 0x00f70000, 0x00f70000, 0x00f70000 } }, + { 6, 0x989c, { 0x009d0000, 0x009d0000, 0x009d0000 } }, + { 6, 0x989c, { 0x00220000, 0x00220000, 0x00220000 } }, + { 6, 0x989c, { 0x04220000, 0x04220000, 0x04220000 } }, + { 6, 0x989c, { 0x00230018, 0x00230018, 0x00230018 } }, + { 6, 0x989c, { 0x00280000, 0x00280060, 0x00280060 } }, + { 6, 0x989c, { 0x005000c0, 0x005000c3, 0x005000c3 } }, + { 6, 0x989c, { 0x0004007f, 0x0004007f, 0x0004007f } }, + { 6, 0x989c, { 0x00000458, 0x00000458, 0x00000458 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x0000c000, 0x0000c000, 0x0000c000 } }, + { 6, 0x98d8, { 0x00400230, 0x00400230, 0x00400230 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, }; @@ -724,88 +576,57 @@ static const struct ath5k_ini_rfbuffer rfb_2413[] = { * RF2315/RF2316 (Cobra SoC) * \***************************/ +/* BANK 2 len pos col */ +#define AR5K_RF2316_RF_TURBO { 1, 1, 2 } + /* BANK 6 len pos col */ #define AR5K_RF2316_OB_2GHZ { 3, 178, 0 } #define AR5K_RF2316_DB_2GHZ { 3, 175, 0 } static const struct ath5k_rf_reg rf_regs_2316[] = { + {2, AR5K_RF_TURBO, AR5K_RF2316_RF_TURBO}, {6, AR5K_RF_OB_2GHZ, AR5K_RF2316_OB_2GHZ}, {6, AR5K_RF_DB_2GHZ, AR5K_RF2316_DB_2GHZ}, }; /* Default mode specific settings */ static const struct ath5k_ini_rfbuffer rfb_2316[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } }, - { 3, 0x98dc, - { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000 } }, - { 6, 0x989c, - { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } }, - { 6, 0x989c, - { 0x02000000, 0x02000000, 0x02000000, 0x02000000, 0x02000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x95150000, 0x95150000, 0x95150000, 0x95150000, 0x95150000 } }, - { 6, 0x989c, - { 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00080000, 0x00080000, 0x00080000, 0x00080000, 0x00080000 } }, - { 6, 0x989c, - { 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000 } }, - { 6, 0x989c, - { 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000 } }, - { 6, 0x989c, - { 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000 } }, - { 6, 0x989c, - { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } }, - { 6, 0x989c, - { 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000 } }, - { 6, 0x989c, - { 0x10880000, 0x10880000, 0x10880000, 0x10880000, 0x10880000 } }, - { 6, 0x989c, - { 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060 } }, - { 6, 0x989c, - { 0x00a00000, 0x00a00000, 0x00a00080, 0x00a00080, 0x00a00080 } }, - { 6, 0x989c, - { 0x00400000, 0x00400000, 0x0040000d, 0x0040000d, 0x0040000d } }, - { 6, 0x989c, - { 0x00110400, 0x00110400, 0x00110400, 0x00110400, 0x00110400 } }, - { 6, 0x989c, - { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, - { 6, 0x989c, - { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, - { 6, 0x989c, - { 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00 } }, - { 6, 0x989c, - { 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8 } }, - { 6, 0x98c0, - { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } }, - { 7, 0x989c, - { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, - { 7, 0x989c, - { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0xc0000000, 0xc0000000, 0xc0000000 } }, + { 6, 0x989c, { 0x0f000000, 0x0f000000, 0x0f000000 } }, + { 6, 0x989c, { 0x02000000, 0x02000000, 0x02000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0xf8000000, 0xf8000000, 0xf8000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x95150000, 0x95150000, 0x95150000 } }, + { 6, 0x989c, { 0xc1000000, 0xc1000000, 0xc1000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00080000, 0x00080000, 0x00080000 } }, + { 6, 0x989c, { 0x00d50000, 0x00d50000, 0x00d50000 } }, + { 6, 0x989c, { 0x000e0000, 0x000e0000, 0x000e0000 } }, + { 6, 0x989c, { 0x00dc0000, 0x00dc0000, 0x00dc0000 } }, + { 6, 0x989c, { 0x00770000, 0x00770000, 0x00770000 } }, + { 6, 0x989c, { 0x008a0000, 0x008a0000, 0x008a0000 } }, + { 6, 0x989c, { 0x10880000, 0x10880000, 0x10880000 } }, + { 6, 0x989c, { 0x008c0060, 0x008c0060, 0x008c0060 } }, + { 6, 0x989c, { 0x00a00000, 0x00a00080, 0x00a00080 } }, + { 6, 0x989c, { 0x00400000, 0x0040000d, 0x0040000d } }, + { 6, 0x989c, { 0x00110400, 0x00110400, 0x00110400 } }, + { 6, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } }, + { 6, 0x989c, { 0x00000001, 0x00000001, 0x00000001 } }, + { 6, 0x989c, { 0x00000b00, 0x00000b00, 0x00000b00 } }, + { 6, 0x989c, { 0x00000be8, 0x00000be8, 0x00000be8 } }, + { 6, 0x98c0, { 0x00010000, 0x00010000, 0x00010000 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, }; @@ -835,93 +656,50 @@ static const struct ath5k_rf_reg rf_regs_5413[] = { /* Default mode specific settings */ static const struct ath5k_ini_rfbuffer rfb_5413[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, - { 3, 0x98dc, - { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } }, - { 6, 0x989c, - { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } }, - { 6, 0x989c, - { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } }, - { 6, 0x989c, - { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } }, - { 6, 0x989c, - { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, - { 6, 0x989c, - { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, - { 6, 0x989c, - { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } }, - { 6, 0x989c, - { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } }, - { 6, 0x989c, - { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } }, - { 6, 0x989c, - { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } }, - { 6, 0x989c, - { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } }, - { 6, 0x989c, - { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } }, - { 6, 0x989c, - { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } }, - { 6, 0x989c, - { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } }, - { 6, 0x989c, - { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, - { 6, 0x989c, - { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } }, - { 6, 0x989c, - { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } }, - { 6, 0x989c, - { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } }, - { 6, 0x989c, - { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } }, - { 6, 0x989c, - { 0x00510040, 0x00510040, 0x00510040, 0x00510040, 0x00510040 } }, - { 6, 0x989c, - { 0x005000da, 0x005000da, 0x005000da, 0x005000da, 0x005000da } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } }, - { 6, 0x989c, - { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00002c00 } }, - { 6, 0x98c8, - { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } }, - { 7, 0x989c, - { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, - { 7, 0x989c, - { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x00000008, 0x00000008, 0x00000008 } }, + { 3, 0x98dc, { 0x00a000c0, 0x00e000c0, 0x00e000c0 } }, + { 6, 0x989c, { 0x33000000, 0x33000000, 0x33000000 } }, + { 6, 0x989c, { 0x01000000, 0x01000000, 0x01000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x1f000000, 0x1f000000, 0x1f000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00b80000, 0x00b80000, 0x00b80000 } }, + { 6, 0x989c, { 0x00b70000, 0x00b70000, 0x00b70000 } }, + { 6, 0x989c, { 0x00840000, 0x00840000, 0x00840000 } }, + { 6, 0x989c, { 0x00980000, 0x00980000, 0x00980000 } }, + { 6, 0x989c, { 0x00c00000, 0x00c00000, 0x00c00000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00d70000, 0x00d70000, 0x00d70000 } }, + { 6, 0x989c, { 0x00610000, 0x00610000, 0x00610000 } }, + { 6, 0x989c, { 0x00fe0000, 0x00fe0000, 0x00fe0000 } }, + { 6, 0x989c, { 0x00de0000, 0x00de0000, 0x00de0000 } }, + { 6, 0x989c, { 0x007f0000, 0x007f0000, 0x007f0000 } }, + { 6, 0x989c, { 0x043d0000, 0x043d0000, 0x043d0000 } }, + { 6, 0x989c, { 0x00770000, 0x00770000, 0x00770000 } }, + { 6, 0x989c, { 0x00440000, 0x00440000, 0x00440000 } }, + { 6, 0x989c, { 0x00980000, 0x00980000, 0x00980000 } }, + { 6, 0x989c, { 0x00100080, 0x00100080, 0x00100080 } }, + { 6, 0x989c, { 0x0005c034, 0x0005c034, 0x0005c034 } }, + { 6, 0x989c, { 0x003100f0, 0x003100f0, 0x003100f0 } }, + { 6, 0x989c, { 0x000c011f, 0x000c011f, 0x000c011f } }, + { 6, 0x989c, { 0x00510040, 0x00510040, 0x00510040 } }, + { 6, 0x989c, { 0x005000da, 0x005000da, 0x005000da } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00004044, 0x00004044, 0x00004044 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x000060c0, 0x000060c0, 0x000060c0 } }, + { 6, 0x989c, { 0x00002c00, 0x00003600, 0x00003600 } }, + { 6, 0x98c8, { 0x00000403, 0x00040403, 0x00040403 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, }; @@ -931,92 +709,59 @@ static const struct ath5k_ini_rfbuffer rfb_5413[] = { * AR2317 (Spider SoC) * \***************************/ +/* BANK 2 len pos col */ +#define AR5K_RF2425_RF_TURBO { 1, 1, 2 } + /* BANK 6 len pos col */ #define AR5K_RF2425_OB_2GHZ { 3, 193, 0 } #define AR5K_RF2425_DB_2GHZ { 3, 190, 0 } static const struct ath5k_rf_reg rf_regs_2425[] = { + {2, AR5K_RF_TURBO, AR5K_RF2425_RF_TURBO}, {6, AR5K_RF_OB_2GHZ, AR5K_RF2425_OB_2GHZ}, {6, AR5K_RF_DB_2GHZ, AR5K_RF2425_DB_2GHZ}, }; /* Default mode specific settings - * XXX: a/aTurbo ? */ static const struct ath5k_ini_rfbuffer rfb_2425[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } }, - { 3, 0x98dc, - { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, 0x989c, - { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } }, - { 6, 0x989c, - { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } }, - { 6, 0x989c, - { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, - { 6, 0x989c, - { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } }, - { 6, 0x989c, - { 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } }, - { 6, 0x989c, - { 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } }, - { 6, 0x989c, - { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } }, - { 6, 0x989c, - { 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } }, - { 6, 0x989c, - { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } }, - { 6, 0x989c, - { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } }, - { 6, 0x989c, - { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } }, - { 6, 0x989c, - { 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } }, - { 6, 0x98c4, - { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, - { 7, 0x989c, - { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, - { 7, 0x989c, - { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, { 0x00e70000, 0x00e70000, 0x00e70000 } }, + { 6, 0x989c, { 0x00140000, 0x00140000, 0x00140000 } }, + { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, { 0x0007001a, 0x0007001a, 0x0007001a } }, + { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } }, + { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, { 0x00001688, 0x00001688, 0x00001688 } }, + { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, }; /* @@ -1024,158 +769,85 @@ static const struct ath5k_ini_rfbuffer rfb_2425[] = { * bank modification and get rid of this */ static const struct ath5k_ini_rfbuffer rfb_2317[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } }, - { 3, 0x98dc, - { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, 0x989c, - { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } }, - { 6, 0x989c, - { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } }, - { 6, 0x989c, - { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, - { 6, 0x989c, - { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } }, - { 6, 0x989c, - { 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } }, - { 6, 0x989c, - { 0x00140100, 0x00140100, 0x00140100, 0x00140100, 0x00140100 } }, - { 6, 0x989c, - { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } }, - { 6, 0x989c, - { 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } }, - { 6, 0x989c, - { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } }, - { 6, 0x989c, - { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } }, - { 6, 0x989c, - { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } }, - { 6, 0x989c, - { 0x00009688, 0x00009688, 0x00009688, 0x00009688, 0x00009688 } }, - { 6, 0x98c4, - { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, - { 7, 0x989c, - { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, - { 7, 0x989c, - { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, { 0x00e70000, 0x00e70000, 0x00e70000 } }, + { 6, 0x989c, { 0x00140100, 0x00140100, 0x00140100 } }, + { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, { 0x0007001a, 0x0007001a, 0x0007001a } }, + { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } }, + { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, { 0x00009688, 0x00009688, 0x00009688 } }, + { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, }; /* * TODO: Handle the few differences with swan during * bank modification and get rid of this - * XXX: a/aTurbo ? */ static const struct ath5k_ini_rfbuffer rfb_2417[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } }, - { 3, 0x98dc, - { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, 0x989c, - { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } }, - { 6, 0x989c, - { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } }, - { 6, 0x989c, - { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, - { 6, 0x989c, - { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } }, - { 6, 0x989c, - { 0x00e70000, 0x00e70000, 0x80e70000, 0x80e70000, 0x00e70000 } }, - { 6, 0x989c, - { 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } }, - { 6, 0x989c, - { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } }, - { 6, 0x989c, - { 0x0007001a, 0x0007001a, 0x0207001a, 0x0207001a, 0x0007001a } }, - { 6, 0x989c, - { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } }, - { 6, 0x989c, - { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } }, - { 6, 0x989c, - { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } }, - { 6, 0x989c, - { 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } }, - { 6, 0x98c4, - { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, - { 7, 0x989c, - { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, - { 7, 0x989c, - { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, { 0x00e70000, 0x80e70000, 0x80e70000 } }, + { 6, 0x989c, { 0x00140000, 0x00140000, 0x00140000 } }, + { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, { 0x0007001a, 0x0207001a, 0x0207001a } }, + { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } }, + { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, { 0x00001688, 0x00001688, 0x00001688 } }, + { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, }; diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h index 1354d8c392c..4d21df0e597 100644 --- a/drivers/net/wireless/ath/ath5k/rfgain.h +++ b/drivers/net/wireless/ath/ath5k/rfgain.h @@ -18,19 +18,23 @@ * */ -/* +/** + * struct ath5k_ini_rfgain - RF Gain table + * @rfg_register: RF Gain register address + * @rfg_value: Register value for 5 and 2GHz + * * Mode-specific RF Gain table (64bytes) for RF5111/5112 * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial * RF Gain values are included in AR5K_AR5210_INI) */ struct ath5k_ini_rfgain { - u16 rfg_register; /* RF Gain register address */ + u16 rfg_register; u32 rfg_value[2]; /* [freq (see below)] */ }; /* Initial RF Gain settings for RF5111 */ static const struct ath5k_ini_rfgain rfgain_5111[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, @@ -99,7 +103,7 @@ static const struct ath5k_ini_rfgain rfgain_5111[] = { /* Initial RF Gain settings for RF5112 */ static const struct ath5k_ini_rfgain rfgain_5112[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } }, { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } }, { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } }, @@ -305,7 +309,7 @@ static const struct ath5k_ini_rfgain rfgain_2316[] = { /* Initial RF Gain settings for RF5413 */ static const struct ath5k_ini_rfgain rfgain_5413[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } }, { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } }, @@ -452,21 +456,34 @@ static const struct ath5k_ini_rfgain rfgain_2425[] = { /* Check if our current measurement is inside our * current variable attenuation window */ -#define AR5K_GAIN_CHECK_ADJUST(_g) \ +#define AR5K_GAIN_CHECK_ADJUST(_g) \ ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) +/** + * struct ath5k_gain_opt_step - An RF gain optimization step + * @gos_param: Set of parameters + * @gos_gain: Gain + */ struct ath5k_gain_opt_step { s8 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; s8 gos_gain; }; +/** + * struct ath5k_gain_opt - RF Gain optimization ladder + * @go_default: The default step + * @go_steps_count: How many optimization steps + * @go_step: Array of &struct ath5k_gain_opt_step + */ struct ath5k_gain_opt { u8 go_default; u8 go_steps_count; const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT]; }; + /* + * RF5111 * Parameters on gos_param: * 1) Tx clip PHY register * 2) PWD 90 RF register @@ -490,6 +507,7 @@ static const struct ath5k_gain_opt rfgain_opt_5111 = { }; /* + * RF5112 * Parameters on gos_param: * 1) Mixgain ovr RF register * 2) PWD 138 RF register diff --git a/drivers/net/wireless/ath/ath5k/rfkill.c b/drivers/net/wireless/ath/ath5k/rfkill.c index 41a877b73fc..270a319f3ae 100644 --- a/drivers/net/wireless/ath/ath5k/rfkill.c +++ b/drivers/net/wireless/ath/ath5k/rfkill.c @@ -33,89 +33,84 @@ * THE POSSIBILITY OF SUCH DAMAGES. */ -#include "base.h" +#include "ath5k.h" -static inline void ath5k_rfkill_disable(struct ath5k_softc *sc) +static inline void ath5k_rfkill_disable(struct ath5k_hw *ah) { - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "rfkill disable (gpio:%d polarity:%d)\n", - sc->rf_kill.gpio, sc->rf_kill.polarity); - ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio); - ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, !sc->rf_kill.polarity); + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "rfkill disable (gpio:%d polarity:%d)\n", + ah->rf_kill.gpio, ah->rf_kill.polarity); + ath5k_hw_set_gpio_output(ah, ah->rf_kill.gpio); + ath5k_hw_set_gpio(ah, ah->rf_kill.gpio, !ah->rf_kill.polarity); } -static inline void ath5k_rfkill_enable(struct ath5k_softc *sc) +static inline void ath5k_rfkill_enable(struct ath5k_hw *ah) { - ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "rfkill enable (gpio:%d polarity:%d)\n", - sc->rf_kill.gpio, sc->rf_kill.polarity); - ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio); - ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, sc->rf_kill.polarity); + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "rfkill enable (gpio:%d polarity:%d)\n", + ah->rf_kill.gpio, ah->rf_kill.polarity); + ath5k_hw_set_gpio_output(ah, ah->rf_kill.gpio); + ath5k_hw_set_gpio(ah, ah->rf_kill.gpio, ah->rf_kill.polarity); } -static inline void ath5k_rfkill_set_intr(struct ath5k_softc *sc, bool enable) +static inline void ath5k_rfkill_set_intr(struct ath5k_hw *ah, bool enable) { - struct ath5k_hw *ah = sc->ah; u32 curval; - ath5k_hw_set_gpio_input(ah, sc->rf_kill.gpio); - curval = ath5k_hw_get_gpio(ah, sc->rf_kill.gpio); - ath5k_hw_set_gpio_intr(ah, sc->rf_kill.gpio, enable ? + ath5k_hw_set_gpio_input(ah, ah->rf_kill.gpio); + curval = ath5k_hw_get_gpio(ah, ah->rf_kill.gpio); + ath5k_hw_set_gpio_intr(ah, ah->rf_kill.gpio, enable ? !!curval : !curval); } static bool -ath5k_is_rfkill_set(struct ath5k_softc *sc) +ath5k_is_rfkill_set(struct ath5k_hw *ah) { /* configuring GPIO for input for some reason disables rfkill */ - /*ath5k_hw_set_gpio_input(sc->ah, sc->rf_kill.gpio);*/ - return ath5k_hw_get_gpio(sc->ah, sc->rf_kill.gpio) == - sc->rf_kill.polarity; + /*ath5k_hw_set_gpio_input(ah, ah->rf_kill.gpio);*/ + return ath5k_hw_get_gpio(ah, ah->rf_kill.gpio) == + ah->rf_kill.polarity; } static void ath5k_tasklet_rfkill_toggle(unsigned long data) { - struct ath5k_softc *sc = (void *)data; + struct ath5k_hw *ah = (void *)data; bool blocked; - blocked = ath5k_is_rfkill_set(sc); - wiphy_rfkill_set_hw_state(sc->hw->wiphy, blocked); + blocked = ath5k_is_rfkill_set(ah); + wiphy_rfkill_set_hw_state(ah->hw->wiphy, blocked); } void ath5k_rfkill_hw_start(struct ath5k_hw *ah) { - struct ath5k_softc *sc = ah->ah_sc; - /* read rfkill GPIO configuration from EEPROM header */ - sc->rf_kill.gpio = ah->ah_capabilities.cap_eeprom.ee_rfkill_pin; - sc->rf_kill.polarity = ah->ah_capabilities.cap_eeprom.ee_rfkill_pol; + ah->rf_kill.gpio = ah->ah_capabilities.cap_eeprom.ee_rfkill_pin; + ah->rf_kill.polarity = ah->ah_capabilities.cap_eeprom.ee_rfkill_pol; - tasklet_init(&sc->rf_kill.toggleq, ath5k_tasklet_rfkill_toggle, - (unsigned long)sc); + tasklet_init(&ah->rf_kill.toggleq, ath5k_tasklet_rfkill_toggle, + (unsigned long)ah); - ath5k_rfkill_disable(sc); + ath5k_rfkill_disable(ah); /* enable interrupt for rfkill switch */ if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) - ath5k_rfkill_set_intr(sc, true); + ath5k_rfkill_set_intr(ah, true); } void ath5k_rfkill_hw_stop(struct ath5k_hw *ah) { - struct ath5k_softc *sc = ah->ah_sc; - /* disable interrupt for rfkill switch */ if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) - ath5k_rfkill_set_intr(sc, false); + ath5k_rfkill_set_intr(ah, false); - tasklet_kill(&sc->rf_kill.toggleq); + tasklet_kill(&ah->rf_kill.toggleq); /* enable RFKILL when stopping HW so Wifi LED is turned off */ - ath5k_rfkill_enable(sc); + ath5k_rfkill_enable(ah); } diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c index 90757de7bf5..04cf0ca7261 100644 --- a/drivers/net/wireless/ath/ath5k/sysfs.c +++ b/drivers/net/wireless/ath/ath5k/sysfs.c @@ -1,7 +1,8 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/device.h> #include <linux/pci.h> -#include "base.h" #include "ath5k.h" #include "reg.h" @@ -10,19 +11,23 @@ static ssize_t ath5k_attr_show_##name(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ - return snprintf(buf, PAGE_SIZE, "%d\n", get); \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_hw *ah = hw->priv; \ + return snprintf(buf, PAGE_SIZE, "%d\n", get); \ } \ \ static ssize_t ath5k_attr_store_##name(struct device *dev, \ struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ - int val; \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_hw *ah = hw->priv; \ + int val, ret; \ \ - val = (int)simple_strtoul(buf, NULL, 10); \ - set(sc->ah, val); \ + ret = kstrtoint(buf, 10, &val); \ + if (ret < 0) \ + return ret; \ + set(ah, val); \ return count; \ } \ static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, \ @@ -33,25 +38,26 @@ static ssize_t ath5k_attr_show_##name(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ - return snprintf(buf, PAGE_SIZE, "%d\n", get); \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_hw *ah = hw->priv; \ + return snprintf(buf, PAGE_SIZE, "%d\n", get); \ } \ static DEVICE_ATTR(name, S_IRUGO, ath5k_attr_show_##name, NULL) /*** ANI ***/ -SIMPLE_SHOW_STORE(ani_mode, sc->ani_state.ani_mode, ath5k_ani_init); -SIMPLE_SHOW_STORE(noise_immunity_level, sc->ani_state.noise_imm_level, +SIMPLE_SHOW_STORE(ani_mode, ah->ani_state.ani_mode, ath5k_ani_init); +SIMPLE_SHOW_STORE(noise_immunity_level, ah->ani_state.noise_imm_level, ath5k_ani_set_noise_immunity_level); -SIMPLE_SHOW_STORE(spur_level, sc->ani_state.spur_level, +SIMPLE_SHOW_STORE(spur_level, ah->ani_state.spur_level, ath5k_ani_set_spur_immunity_level); -SIMPLE_SHOW_STORE(firstep_level, sc->ani_state.firstep_level, +SIMPLE_SHOW_STORE(firstep_level, ah->ani_state.firstep_level, ath5k_ani_set_firstep_level); -SIMPLE_SHOW_STORE(ofdm_weak_signal_detection, sc->ani_state.ofdm_weak_sig, +SIMPLE_SHOW_STORE(ofdm_weak_signal_detection, ah->ani_state.ofdm_weak_sig, ath5k_ani_set_ofdm_weak_signal_detection); -SIMPLE_SHOW_STORE(cck_weak_signal_detection, sc->ani_state.cck_weak_sig, +SIMPLE_SHOW_STORE(cck_weak_signal_detection, ah->ani_state.cck_weak_sig, ath5k_ani_set_cck_weak_signal_detection); -SIMPLE_SHOW(spur_level_max, sc->ani_state.max_spur_level); +SIMPLE_SHOW(spur_level_max, ah->ani_state.max_spur_level); static ssize_t ath5k_attr_show_noise_immunity_level_max(struct device *dev, struct device_attribute *attr, @@ -93,14 +99,14 @@ static struct attribute_group ath5k_attribute_group_ani = { /*** register / unregister ***/ int -ath5k_sysfs_register(struct ath5k_softc *sc) +ath5k_sysfs_register(struct ath5k_hw *ah) { - struct device *dev = &sc->pdev->dev; + struct device *dev = ah->dev; int err; err = sysfs_create_group(&dev->kobj, &ath5k_attribute_group_ani); if (err) { - ATH5K_ERR(sc, "failed to create sysfs group\n"); + ATH5K_ERR(ah, "failed to create sysfs group\n"); return err; } @@ -108,9 +114,9 @@ ath5k_sysfs_register(struct ath5k_softc *sc) } void -ath5k_sysfs_unregister(struct ath5k_softc *sc) +ath5k_sysfs_unregister(struct ath5k_hw *ah) { - struct device *dev = &sc->pdev->dev; + struct device *dev = ah->dev; sysfs_remove_group(&dev->kobj, &ath5k_attribute_group_ani); } diff --git a/drivers/net/wireless/ath/ath5k/trace.h b/drivers/net/wireless/ath/ath5k/trace.h new file mode 100644 index 00000000000..c6eef519bb6 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/trace.h @@ -0,0 +1,106 @@ +#if !defined(__TRACE_ATH5K_H) || defined(TRACE_HEADER_MULTI_READ) +#define __TRACE_ATH5K_H + +#include <linux/tracepoint.h> + + +#if !defined(CONFIG_ATH5K_TRACER) || defined(__CHECKER__) +#undef TRACE_EVENT +#define TRACE_EVENT(name, proto, ...) \ +static inline void trace_ ## name(proto) {} +#endif + +struct sk_buff; +struct ath5k_txq; +struct ath5k_tx_status; + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM ath5k + +TRACE_EVENT(ath5k_rx, + TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb), + TP_ARGS(priv, skb), + TP_STRUCT__entry( + __field(struct ath5k_hw *, priv) + __field(unsigned long, skbaddr) + __dynamic_array(u8, frame, skb->len) + ), + TP_fast_assign( + __entry->priv = priv; + __entry->skbaddr = (unsigned long) skb; + memcpy(__get_dynamic_array(frame), skb->data, skb->len); + ), + TP_printk( + "[%p] RX skb=%lx", __entry->priv, __entry->skbaddr + ) +); + +TRACE_EVENT(ath5k_tx, + TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb, + struct ath5k_txq *q), + + TP_ARGS(priv, skb, q), + + TP_STRUCT__entry( + __field(struct ath5k_hw *, priv) + __field(unsigned long, skbaddr) + __field(u8, qnum) + __dynamic_array(u8, frame, skb->len) + ), + + TP_fast_assign( + __entry->priv = priv; + __entry->skbaddr = (unsigned long) skb; + __entry->qnum = (u8) q->qnum; + memcpy(__get_dynamic_array(frame), skb->data, skb->len); + ), + + TP_printk( + "[%p] TX skb=%lx q=%d", __entry->priv, __entry->skbaddr, + __entry->qnum + ) +); + +TRACE_EVENT(ath5k_tx_complete, + TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb, + struct ath5k_txq *q, struct ath5k_tx_status *ts), + + TP_ARGS(priv, skb, q, ts), + + TP_STRUCT__entry( + __field(struct ath5k_hw *, priv) + __field(unsigned long, skbaddr) + __field(u8, qnum) + __field(u8, ts_status) + __field(s8, ts_rssi) + __field(u8, ts_antenna) + ), + + TP_fast_assign( + __entry->priv = priv; + __entry->skbaddr = (unsigned long) skb; + __entry->qnum = (u8) q->qnum; + __entry->ts_status = ts->ts_status; + __entry->ts_rssi = ts->ts_rssi; + __entry->ts_antenna = ts->ts_antenna; + ), + + TP_printk( + "[%p] TX end skb=%lx q=%d stat=%x rssi=%d ant=%x", + __entry->priv, __entry->skbaddr, __entry->qnum, + __entry->ts_status, __entry->ts_rssi, __entry->ts_antenna + ) +); + +#endif /* __TRACE_ATH5K_H */ + +#if defined(CONFIG_ATH5K_TRACER) && !defined(__CHECKER__) + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include <trace/define_trace.h> + +#endif |