diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/ani.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ani.c | 239 |
1 files changed, 131 insertions, 108 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c index 6b75b22a929..5c008757662 100644 --- a/drivers/net/wireless/ath/ath5k/ani.c +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -14,8 +14,9 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "ath5k.h" -#include "base.h" #include "reg.h" #include "debug.h" #include "ani.h" @@ -28,15 +29,21 @@ * or reducing sensitivity as necessary. * * The parameters are: + * * - "noise immunity" + * * - "spur immunity" + * * - "firstep level" + * * - "OFDM weak signal detection" + * * - "CCK weak signal detection" * * Basically we look at the amount of ODFM and CCK timing errors we get and then * raise or lower immunity accordingly by setting one or more of these * parameters. + * * Newer chipsets have PHY error counters in hardware which will generate a MIB * interrupt when they overflow. Older hardware has too enable PHY error frames * by setting a RX flag and then count every single PHY error. When a specified @@ -46,11 +53,13 @@ */ -/*** ANI parameter control ***/ +/***********************\ +* ANI parameter control * +\***********************/ /** * ath5k_ani_set_noise_immunity_level() - Set noise immunity level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @ATH5K_ANI_MAX_NOISE_IMM_LVL */ void @@ -58,23 +67,23 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) { /* TODO: * ANI documents suggest the following five levels to use, but the HAL - * and ath9k use only use the last two levels, making this + * and ath9k use only the last two levels, making this * essentially an on/off option. There *may* be a reason for this (???), * so i stick with the HAL version for now... */ #if 0 - static const s8 hi[] = { -18, -18, -16, -14, -12 }; static const s8 lo[] = { -52, -56, -60, -64, -70 }; + static const s8 hi[] = { -18, -18, -16, -14, -12 }; static const s8 sz[] = { -34, -41, -48, -55, -62 }; static const s8 fr[] = { -70, -72, -75, -78, -80 }; #else - static const s8 sz[] = { -55, -62 }; static const s8 lo[] = { -64, -70 }; static const s8 hi[] = { -14, -12 }; + static const s8 sz[] = { -55, -62 }; static const s8 fr[] = { -78, -80 }; #endif if (level < 0 || level >= ARRAY_SIZE(sz)) { - ATH5K_ERR(ah->ah_sc, "noise immuniy level %d out of range", + ATH5K_ERR(ah, "noise immunity level %d out of range", level); return; } @@ -88,16 +97,15 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRPWR, fr[level]); - ah->ah_sc->ani_state.noise_imm_level = level; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); + ah->ani_state.noise_imm_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** * ath5k_ani_set_spur_immunity_level() - Set spur immunity level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @max_spur_level (the maximum level is dependent - * on the chip revision). + * on the chip revision). */ void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) @@ -105,8 +113,8 @@ ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) static const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 }; if (level < 0 || level >= ARRAY_SIZE(val) || - level > ah->ah_sc->ani_state.max_spur_level) { - ATH5K_ERR(ah->ah_sc, "spur immunity level %d out of range", + level > ah->ani_state.max_spur_level) { + ATH5K_ERR(ah, "spur immunity level %d out of range", level); return; } @@ -114,14 +122,13 @@ ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, val[level]); - ah->ah_sc->ani_state.spur_level = level; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); + ah->ani_state.spur_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** * ath5k_ani_set_firstep_level() - Set "firstep" level - * + * @ah: The &struct ath5k_hw * @level: level between 0 and @ATH5K_ANI_MAX_FIRSTEP_LVL */ void @@ -130,22 +137,20 @@ ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level) static const int val[] = { 0, 4, 8 }; if (level < 0 || level >= ARRAY_SIZE(val)) { - ATH5K_ERR(ah->ah_sc, "firstep level %d out of range", level); + ATH5K_ERR(ah, "firstep level %d out of range", level); return; } AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG, AR5K_PHY_SIG_FIRSTEP, val[level]); - ah->ah_sc->ani_state.firstep_level = level; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "new level %d", level); + ah->ani_state.firstep_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); } - /** - * ath5k_ani_set_ofdm_weak_signal_detection() - Control OFDM weak signal - * detection - * + * ath5k_ani_set_ofdm_weak_signal_detection() - Set OFDM weak signal detection + * @ah: The &struct ath5k_hw * @on: turn on or off */ void @@ -178,15 +183,14 @@ ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on) AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN); - ah->ah_sc->ani_state.ofdm_weak_sig = on; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "turned %s", + ah->ani_state.ofdm_weak_sig = on; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "turned %s", on ? "on" : "off"); } - /** - * ath5k_ani_set_cck_weak_signal_detection() - control CCK weak signal detection - * + * ath5k_ani_set_cck_weak_signal_detection() - Set CCK weak signal detection + * @ah: The &struct ath5k_hw * @on: turn on or off */ void @@ -195,19 +199,22 @@ ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on) static const int val[] = { 8, 6 }; AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR, AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]); - ah->ah_sc->ani_state.cck_weak_sig = on; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "turned %s", + ah->ani_state.cck_weak_sig = on; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "turned %s", on ? "on" : "off"); } -/*** ANI algorithm ***/ +/***************\ +* ANI algorithm * +\***************/ /** * ath5k_ani_raise_immunity() - Increase noise immunity - * + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * @ofdm_trigger: If this is true we are called because of too many OFDM errors, - * the algorithm will tune more parameters then. + * the algorithm will tune more parameters then. * * Try to raise noise immunity (=decrease sensitivity) in several steps * depending on the average RSSI of the beacons we received. @@ -218,7 +225,7 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, { int rssi = ewma_read(&ah->ah_beacon_rssi_avg); - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "raise immunity (%s)", + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "raise immunity (%s)", ofdm_trigger ? "ODFM" : "CCK"); /* first: raise noise immunity */ @@ -229,13 +236,13 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, /* only OFDM: raise spur immunity level */ if (ofdm_trigger && - as->spur_level < ah->ah_sc->ani_state.max_spur_level) { + as->spur_level < ah->ani_state.max_spur_level) { ath5k_ani_set_spur_immunity_level(ah, as->spur_level + 1); return; } /* AP mode */ - if (ah->ah_sc->opmode == NL80211_IFTYPE_AP) { + if (ah->opmode == NL80211_IFTYPE_AP) { if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); return; @@ -248,11 +255,11 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, * don't shut out a remote node by raising immunity too high. */ if (rssi > ATH5K_ANI_RSSI_THR_HIGH) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "beacon RSSI high"); /* only OFDM: beacon RSSI is high, we can disable ODFM weak * signal detection */ - if (ofdm_trigger && as->ofdm_weak_sig == true) { + if (ofdm_trigger && as->ofdm_weak_sig) { ath5k_ani_set_ofdm_weak_signal_detection(ah, false); ath5k_ani_set_spur_immunity_level(ah, 0); return; @@ -265,9 +272,9 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { /* beacon RSSI in mid range, we need OFDM weak signal detect, * but can raise firstep level */ - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "beacon RSSI mid"); - if (ofdm_trigger && as->ofdm_weak_sig == false) + if (ofdm_trigger && !as->ofdm_weak_sig) ath5k_ani_set_ofdm_weak_signal_detection(ah, true); if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); @@ -275,9 +282,9 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, } else if (ah->ah_current_channel->band == IEEE80211_BAND_2GHZ) { /* beacon RSSI is low. in B/G mode turn of OFDM weak signal * detect and zero firstep level to maximize CCK sensitivity */ - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "beacon RSSI low, 2GHz"); - if (ofdm_trigger && as->ofdm_weak_sig == true) + if (ofdm_trigger && as->ofdm_weak_sig) ath5k_ani_set_ofdm_weak_signal_detection(ah, false); if (as->firstep_level > 0) ath5k_ani_set_firstep_level(ah, 0); @@ -291,9 +298,10 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, */ } - /** * ath5k_ani_lower_immunity() - Decrease noise immunity + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Try to lower noise immunity (=increase sensitivity) in several steps * depending on the average RSSI of the beacons we received. @@ -303,9 +311,9 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) { int rssi = ewma_read(&ah->ah_beacon_rssi_avg); - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "lower immunity"); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "lower immunity"); - if (ah->ah_sc->opmode == NL80211_IFTYPE_AP) { + if (ah->opmode == NL80211_IFTYPE_AP) { /* AP mode */ if (as->firstep_level > 0) { ath5k_ani_set_firstep_level(ah, as->firstep_level - 1); @@ -320,7 +328,7 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { /* beacon RSSI is mid-range: turn on ODFM weak signal * detection and next, lower firstep level */ - if (as->ofdm_weak_sig == false) { + if (!as->ofdm_weak_sig) { ath5k_ani_set_ofdm_weak_signal_detection(ah, true); return; @@ -353,9 +361,10 @@ ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) } } - /** * ath5k_hw_ani_get_listen_time() - Update counters and return listening time + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Return an approximation of the time spent "listening" in milliseconds (ms) * since the last call of this function. @@ -380,9 +389,10 @@ ath5k_hw_ani_get_listen_time(struct ath5k_hw *ah, struct ath5k_ani_state *as) return listen; } - /** * ath5k_ani_save_and_clear_phy_errors() - Clear and save PHY error counters + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state * * Clear the PHY error counters as soon as possible, since this might be called * from a MIB interrupt and we want to make sure we don't get interrupted again. @@ -430,14 +440,14 @@ ath5k_ani_save_and_clear_phy_errors(struct ath5k_hw *ah, return 1; } - /** * ath5k_ani_period_restart() - Restart ANI period + * @as: The &struct ath5k_ani_state * * Just reset counters, so they are clear for the next "ani period". */ static void -ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) +ath5k_ani_period_restart(struct ath5k_ani_state *as) { /* keep last values for debugging */ as->last_ofdm_errors = as->ofdm_errors; @@ -449,9 +459,9 @@ ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) as->listen_time = 0; } - /** * ath5k_ani_calibration() - The main ANI calibration function + * @ah: The &struct ath5k_hw * * We count OFDM and CCK errors relative to the time where we did not send or * receive ("listen" time) and raise or lower immunity accordingly. @@ -464,7 +474,7 @@ ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as) void ath5k_ani_calibration(struct ath5k_hw *ah) { - struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + struct ath5k_ani_state *as = &ah->ani_state; int listen, ofdm_high, ofdm_low, cck_high, cck_low; /* get listen time since last call and add it to the counter because we @@ -483,9 +493,9 @@ ath5k_ani_calibration(struct ath5k_hw *ah) ofdm_low = as->listen_time * ATH5K_ANI_OFDM_TRIG_LOW / 1000; cck_low = as->listen_time * ATH5K_ANI_CCK_TRIG_LOW / 1000; - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "listen %d (now %d)", as->listen_time, listen); - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "check high ofdm %d/%d cck %d/%d", as->ofdm_errors, ofdm_high, as->cck_errors, cck_high); @@ -493,27 +503,30 @@ ath5k_ani_calibration(struct ath5k_hw *ah) /* too many PHY errors - we have to raise immunity */ bool ofdm_flag = as->ofdm_errors > ofdm_high ? true : false; ath5k_ani_raise_immunity(ah, as, ofdm_flag); - ath5k_ani_period_restart(ah, as); + ath5k_ani_period_restart(as); } else if (as->listen_time > 5 * ATH5K_ANI_LISTEN_PERIOD) { /* If more than 5 (TODO: why 5?) periods have passed and we got * relatively little errors we can try to lower immunity */ - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "check low ofdm %d/%d cck %d/%d", as->ofdm_errors, ofdm_low, as->cck_errors, cck_low); if (as->ofdm_errors <= ofdm_low && as->cck_errors <= cck_low) ath5k_ani_lower_immunity(ah, as); - ath5k_ani_period_restart(ah, as); + ath5k_ani_period_restart(as); } } -/*** INTERRUPT HANDLER ***/ +/*******************\ +* Interrupt handler * +\*******************/ /** * ath5k_ani_mib_intr() - Interrupt handler for ANI MIB counters + * @ah: The &struct ath5k_hw * * Just read & reset the registers quickly, so they don't generate more * interrupts, save the counters and schedule the tasklet to decide whether @@ -525,7 +538,7 @@ ath5k_ani_calibration(struct ath5k_hw *ah) void ath5k_ani_mib_intr(struct ath5k_hw *ah) { - struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + struct ath5k_ani_state *as = &ah->ani_state; /* nothing to do here if HW does not have PHY error counters - they * can't be the reason for the MIB interrupt then */ @@ -536,7 +549,7 @@ ath5k_ani_mib_intr(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT); ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); - if (ah->ah_sc->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO) + if (ah->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO) return; /* If one of the errors triggered, we can get a superfluous second @@ -547,12 +560,14 @@ ath5k_ani_mib_intr(struct ath5k_hw *ah) if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH || as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH) - tasklet_schedule(&ah->ah_sc->ani_tasklet); + tasklet_schedule(&ah->ani_tasklet); } - /** - * ath5k_ani_phy_error_report() - Used by older HW to report PHY errors + * ath5k_ani_phy_error_report - Used by older HW to report PHY errors + * + * @ah: The &struct ath5k_hw + * @phyerr: One of enum ath5k_phy_error_code * * This is used by hardware without PHY error counters to report PHY errors * on a frame-by-frame basis, instead of the interrupt. @@ -561,24 +576,27 @@ void ath5k_ani_phy_error_report(struct ath5k_hw *ah, enum ath5k_phy_error_code phyerr) { - struct ath5k_ani_state *as = &ah->ah_sc->ani_state; + struct ath5k_ani_state *as = &ah->ani_state; if (phyerr == AR5K_RX_PHY_ERROR_OFDM_TIMING) { as->ofdm_errors++; if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH) - tasklet_schedule(&ah->ah_sc->ani_tasklet); + tasklet_schedule(&ah->ani_tasklet); } else if (phyerr == AR5K_RX_PHY_ERROR_CCK_TIMING) { as->cck_errors++; if (as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH) - tasklet_schedule(&ah->ah_sc->ani_tasklet); + tasklet_schedule(&ah->ani_tasklet); } } -/*** INIT ***/ +/****************\ +* Initialization * +\****************/ /** * ath5k_enable_phy_err_counters() - Enable PHY error counters + * @ah: The &struct ath5k_hw * * Enable PHY error counters for OFDM and CCK timing errors. */ @@ -597,9 +615,9 @@ ath5k_enable_phy_err_counters(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); } - /** * ath5k_disable_phy_err_counters() - Disable PHY error counters + * @ah: The &struct ath5k_hw * * Disable PHY error counters for OFDM and CCK timing errors. */ @@ -616,10 +634,10 @@ ath5k_disable_phy_err_counters(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); } - /** * ath5k_ani_init() - Initialize ANI - * @mode: Which mode to use (auto, manual high, manual low, off) + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_ani_mode * * Initialize ANI according to mode. */ @@ -630,20 +648,25 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) if (ah->ah_version < AR5K_AR5212) return; + if (mode < ATH5K_ANI_MODE_OFF || mode > ATH5K_ANI_MODE_AUTO) { + ATH5K_ERR(ah, "ANI mode %d out of range", mode); + return; + } + /* clear old state information */ - memset(&ah->ah_sc->ani_state, 0, sizeof(ah->ah_sc->ani_state)); + memset(&ah->ani_state, 0, sizeof(ah->ani_state)); /* older hardware has more spur levels than newer */ if (ah->ah_mac_srev < AR5K_SREV_AR2414) - ah->ah_sc->ani_state.max_spur_level = 7; + ah->ani_state.max_spur_level = 7; else - ah->ah_sc->ani_state.max_spur_level = 2; + ah->ani_state.max_spur_level = 2; /* initial values for our ani parameters */ if (mode == ATH5K_ANI_MODE_OFF) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI off\n"); - } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI off\n"); + } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI manual low -> high sensitivity\n"); ath5k_ani_set_noise_immunity_level(ah, 0); ath5k_ani_set_spur_immunity_level(ah, 0); @@ -651,17 +674,17 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) ath5k_ani_set_ofdm_weak_signal_detection(ah, true); ath5k_ani_set_cck_weak_signal_detection(ah, true); } else if (mode == ATH5K_ANI_MODE_MANUAL_HIGH) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI manual high -> low sensitivity\n"); ath5k_ani_set_noise_immunity_level(ah, ATH5K_ANI_MAX_NOISE_IMM_LVL); ath5k_ani_set_spur_immunity_level(ah, - ah->ah_sc->ani_state.max_spur_level); + ah->ani_state.max_spur_level); ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL); ath5k_ani_set_ofdm_weak_signal_detection(ah, false); ath5k_ani_set_cck_weak_signal_detection(ah, false); } else if (mode == ATH5K_ANI_MODE_AUTO) { - ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI auto\n"); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI auto\n"); ath5k_ani_set_noise_immunity_level(ah, 0); ath5k_ani_set_spur_immunity_level(ah, 0); ath5k_ani_set_firstep_level(ah, 0); @@ -687,45 +710,45 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) ~AR5K_RX_FILTER_PHYERR); } - ah->ah_sc->ani_state.ani_mode = mode; + ah->ani_state.ani_mode = mode; } -/*** DEBUG ***/ +/**************\ +* Debug output * +\**************/ #ifdef CONFIG_ATH5K_DEBUG +/** + * ath5k_ani_print_counters() - Print ANI counters + * @ah: The &struct ath5k_hw + * + * Used for debugging ANI + */ void ath5k_ani_print_counters(struct ath5k_hw *ah) { /* clears too */ - printk(KERN_NOTICE "ACK fail\t%d\n", - ath5k_hw_reg_read(ah, AR5K_ACK_FAIL)); - printk(KERN_NOTICE "RTS fail\t%d\n", - ath5k_hw_reg_read(ah, AR5K_RTS_FAIL)); - printk(KERN_NOTICE "RTS success\t%d\n", - ath5k_hw_reg_read(ah, AR5K_RTS_OK)); - printk(KERN_NOTICE "FCS error\t%d\n", - ath5k_hw_reg_read(ah, AR5K_FCS_FAIL)); + pr_notice("ACK fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_ACK_FAIL)); + pr_notice("RTS fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_FAIL)); + pr_notice("RTS success\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_OK)); + pr_notice("FCS error\t%d\n", ath5k_hw_reg_read(ah, AR5K_FCS_FAIL)); /* no clear */ - printk(KERN_NOTICE "tx\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX)); - printk(KERN_NOTICE "rx\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX)); - printk(KERN_NOTICE "busy\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR)); - printk(KERN_NOTICE "cycles\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE)); - - printk(KERN_NOTICE "AR5K_PHYERR_CNT1\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)); - printk(KERN_NOTICE "AR5K_PHYERR_CNT2\t%d\n", - ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)); - printk(KERN_NOTICE "AR5K_OFDM_FIL_CNT\t%d\n", - ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT)); - printk(KERN_NOTICE "AR5K_CCK_FIL_CNT\t%d\n", - ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT)); + pr_notice("tx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX)); + pr_notice("rx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX)); + pr_notice("busy\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR)); + pr_notice("cycles\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE)); + + pr_notice("AR5K_PHYERR_CNT1\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)); + pr_notice("AR5K_PHYERR_CNT2\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)); + pr_notice("AR5K_OFDM_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT)); + pr_notice("AR5K_CCK_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT)); } #endif |
