diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/ath5k.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/ath5k.h | 1232 |
1 files changed, 814 insertions, 418 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 2718136e488..74bd54d6ace 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -18,15 +18,18 @@ #ifndef _ATH5K_H #define _ATH5K_H -/* TODO: Clean up channel debuging -doesn't work anyway- and start +/* TODO: Clean up channel debugging (doesn't work anyway) and start * working on reg. control code using all available eeprom information - * -rev. engineering needed- */ + * (rev. engineering needed) */ #define CHAN_DEBUG 0 #include <linux/io.h> +#include <linux/interrupt.h> #include <linux/types.h> #include <linux/average.h> +#include <linux/leds.h> #include <net/mac80211.h> +#include <net/cfg80211.h> /* RX/TX descriptor hw structs * TODO: Driver part should only see sw structs */ @@ -36,61 +39,67 @@ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) * and clean up common bits, then introduce set/get functions in eeprom.c */ #include "eeprom.h" +#include "debug.h" #include "../ath.h" +#include "ani.h" /* PCI IDs */ -#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ -#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ -#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ -#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ -#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ -#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ +#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ +#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ +#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ +#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ +#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ -#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ -#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ -#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ -#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ +#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ +#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ +#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ +#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ /****************************\ GENERIC DRIVER DEFINITIONS \****************************/ -#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) +#define ATH5K_PRINTF(fmt, ...) \ + pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) -#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ - printk(_level "ath5k %s: " _fmt, \ - ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ - ##__VA_ARGS__) +void __printf(3, 4) +_ath5k_printk(const struct ath5k_hw *ah, const char *level, + const char *fmt, ...); -#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ - if (net_ratelimit()) \ - ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ - } while (0) +#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ + _ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__) -#define ATH5K_INFO(_sc, _fmt, ...) \ +#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \ +do { \ + if (net_ratelimit()) \ + ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ +} while (0) + +#define ATH5K_INFO(_sc, _fmt, ...) \ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) -#define ATH5K_WARN(_sc, _fmt, ...) \ +#define ATH5K_WARN(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) -#define ATH5K_ERR(_sc, _fmt, ...) \ +#define ATH5K_ERR(_sc, _fmt, ...) \ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) /* @@ -126,13 +135,6 @@ #define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) -/* Access to PHY registers */ -#define AR5K_PHY_READ(ah, _reg) \ - ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_PHY_WRITE(ah, _reg, _val) \ - ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) - /* Access QCU registers per queue */ #define AR5K_REG_READ_Q(ah, _reg, _queue) \ (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ @@ -154,27 +156,13 @@ udelay(1); \ } while (0) -/* Register dumps are done per operation mode */ -#define AR5K_INI_RFGAIN_5GHZ 0 -#define AR5K_INI_RFGAIN_2GHZ 1 - -/* TODO: Clean this up */ -#define AR5K_INI_VAL_11A 0 -#define AR5K_INI_VAL_11A_TURBO 1 -#define AR5K_INI_VAL_11B 2 -#define AR5K_INI_VAL_11G 3 -#define AR5K_INI_VAL_11G_TURBO 4 -#define AR5K_INI_VAL_XR 0 -#define AR5K_INI_VAL_MAX 5 - /* - * Some tuneable values (these should be changeable by the user) + * Some tunable values (these should be changeable by the user) * TODO: Make use of them and add more options OR use debug/configfs */ #define AR5K_TUNE_DMA_BEACON_RESP 2 #define AR5K_TUNE_SW_BEACON_RESP 10 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 -#define AR5K_TUNE_RADAR_ALERT false #define AR5K_TUNE_MIN_TX_FIFO_THRES 1 #define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) #define AR5K_TUNE_REGISTER_TIMEOUT 20000 @@ -183,8 +171,8 @@ #define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it - * the BMISS_THRES will be seen as 0, seems harware doesn't keep - * track of it. Max value depends on harware. For AR5210 this is just 7. + * the BMISS_THRES will be seen as 0, seems hardware doesn't keep + * track of it. Max value depends on hardware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ #define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 @@ -203,10 +191,9 @@ #define AR5K_TUNE_MAX_TXPOWER 63 #define AR5K_TUNE_DEFAULT_TXPOWER 25 #define AR5K_TUNE_TPC_TXPOWER false -#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 10000 /* 10 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ #define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ -#define ATH5K_TUNE_CALIBRATION_INTERVAL_NF 60000 /* 60 sec */ - #define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ #define AR5K_INIT_CARR_SENSE_EN 1 @@ -222,54 +209,90 @@ /* Initial values */ #define AR5K_INIT_CYCRSSI_THR1 2 -#define AR5K_INIT_TX_LATENCY 502 -#define AR5K_INIT_USEC 39 -#define AR5K_INIT_USEC_TURBO 79 -#define AR5K_INIT_USEC_32 31 -#define AR5K_INIT_SLOT_TIME 396 -#define AR5K_INIT_SLOT_TIME_TURBO 480 -#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 -#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 -#define AR5K_INIT_PROG_IFS 920 -#define AR5K_INIT_PROG_IFS_TURBO 960 -#define AR5K_INIT_EIFS 3440 -#define AR5K_INIT_EIFS_TURBO 6880 -#define AR5K_INIT_SIFS 560 -#define AR5K_INIT_SIFS_TURBO 480 -#define AR5K_INIT_SH_RETRY 10 -#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY -#define AR5K_INIT_SSH_RETRY 32 -#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY -#define AR5K_INIT_TX_RETRY 10 - -#define AR5K_INIT_TRANSMIT_LATENCY ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC) \ -) -#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC_TURBO) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ - (AR5K_INIT_PROG_IFS) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ - (AR5K_INIT_PROG_IFS_TURBO) \ -) - -/* GENERIC CHIPSET DEFINITIONS */ +/* Tx retry limit defaults from standard */ +#define AR5K_INIT_RETRY_SHORT 7 +#define AR5K_INIT_RETRY_LONG 4 + +/* Slot time */ +#define AR5K_INIT_SLOT_TIME_TURBO 6 +#define AR5K_INIT_SLOT_TIME_DEFAULT 9 +#define AR5K_INIT_SLOT_TIME_HALF_RATE 13 +#define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21 +#define AR5K_INIT_SLOT_TIME_B 20 +#define AR5K_SLOT_TIME_MAX 0xffff + +/* SIFS */ +#define AR5K_INIT_SIFS_TURBO 6 +#define AR5K_INIT_SIFS_DEFAULT_BG 10 +#define AR5K_INIT_SIFS_DEFAULT_A 16 +#define AR5K_INIT_SIFS_HALF_RATE 32 +#define AR5K_INIT_SIFS_QUARTER_RATE 64 + +/* Used to calculate tx time for non 5/10/40MHz + * operation */ +/* It's preamble time + signal time (16 + 4) */ +#define AR5K_INIT_OFDM_PREAMPLE_TIME 20 +/* Preamble time for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14 +#define AR5K_INIT_OFDM_SYMBOL_TIME 4 +#define AR5K_INIT_OFDM_PLCP_BITS 22 + +/* Rx latency for 5 and 10MHz operation (max ?) */ +#define AR5K_INIT_RX_LAT_MAX 63 +/* Tx latencies from initvals (5212 only but no problem + * because we only tweak them on 5212) */ +#define AR5K_INIT_TX_LAT_A 54 +#define AR5K_INIT_TX_LAT_BG 384 +/* Tx latency for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_TX_LAT_MIN 32 +/* Default Tx/Rx latencies (same for 5211)*/ +#define AR5K_INIT_TX_LATENCY_5210 54 +#define AR5K_INIT_RX_LATENCY_5210 29 + +/* Tx frame to Tx data start delay */ +#define AR5K_INIT_TXF2TXD_START_DEFAULT 14 +#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 +#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 + +/* We need to increase PHY switch and agc settling time + * on turbo mode */ +#define AR5K_SWITCH_SETTLING 5760 +#define AR5K_SWITCH_SETTLING_TURBO 7168 + +#define AR5K_AGC_SETTLING 28 +/* 38 on 5210 but shouldn't matter */ +#define AR5K_AGC_SETTLING_TURBO 37 + + + +/*****************************\ +* GENERIC CHIPSET DEFINITIONS * +\*****************************/ -/* MAC Chips */ +/** + * enum ath5k_version - MAC Chips + * @AR5K_AR5210: AR5210 (Crete) + * @AR5K_AR5211: AR5211 (Oahu/Maui) + * @AR5K_AR5212: AR5212 (Venice) and newer + */ enum ath5k_version { AR5K_AR5210 = 0, AR5K_AR5211 = 1, AR5K_AR5212 = 2, }; -/* PHY Chips */ +/** + * enum ath5k_radio - PHY Chips + * @AR5K_RF5110: RF5110 (Fez) + * @AR5K_RF5111: RF5111 (Sombrero) + * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) + * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) + * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) + * @AR5K_RF2316: RF2315/2316 (Cobra SoC) + * @AR5K_RF2317: RF2317 (Spider SoC) + * @AR5K_RF2425: RF2425/2417 (Swan/Nalla) + */ enum ath5k_radio { AR5K_RF5110 = 0, AR5K_RF5111 = 1, @@ -285,17 +308,6 @@ enum ath5k_radio { * Common silicon revision/version values */ -enum ath5k_srev_type { - AR5K_VERSION_MAC, - AR5K_VERSION_RAD, -}; - -struct ath5k_srev_name { - const char *sr_name; - enum ath5k_srev_type sr_type; - u_int sr_val; -}; - #define AR5K_SREV_UNKNOWN 0xffff #define AR5K_SREV_AR5210 0x00 /* Crete */ @@ -304,12 +316,19 @@ struct ath5k_srev_name { #define AR5K_SREV_AR5311B 0x30 /* Spirit */ #define AR5K_SREV_AR5211 0x40 /* Oahu */ #define AR5K_SREV_AR5212 0x50 /* Venice */ +#define AR5K_SREV_AR5312_R2 0x52 /* AP31 */ #define AR5K_SREV_AR5212_V4 0x54 /* ??? */ #define AR5K_SREV_AR5213 0x55 /* ??? */ +#define AR5K_SREV_AR5312_R7 0x57 /* AP30 */ +#define AR5K_SREV_AR2313_R8 0x58 /* AP43 */ #define AR5K_SREV_AR5213A 0x59 /* Hainan */ #define AR5K_SREV_AR2413 0x78 /* Griffin lite */ #define AR5K_SREV_AR2414 0x70 /* Griffin */ +#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ +#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ #define AR5K_SREV_AR5424 0x90 /* Condor */ +#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ +#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ #define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ #define AR5K_SREV_AR5414 0xa0 /* Eagle */ #define AR5K_SREV_AR2415 0xb0 /* Talon */ @@ -346,32 +365,40 @@ struct ath5k_srev_name { /* TODO add support to mac80211 for vendor-specific rates and modes */ -/* +/** + * DOC: Atheros XR + * * Some of this information is based on Documentation from: * - * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG * - * Modulation for Atheros' eXtended Range - range enhancing extension that is - * supposed to double the distance an Atheros client device can keep a - * connection with an Atheros access point. This is achieved by increasing - * the receiver sensitivity up to, -105dBm, which is about 20dB above what - * the 802.11 specifications demand. In addition, new (proprietary) data rates - * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. + * Atheros' eXtended Range - range enhancing extension is a modulation scheme + * that is supposed to double the link distance between an Atheros XR-enabled + * client device with an Atheros XR-enabled access point. This is achieved + * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB + * above what the 802.11 specifications demand. In addition, new (proprietary) + * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. * * Please note that can you either use XR or TURBO but you cannot use both, * they are exclusive. * + * Also note that we do not plan to support XR mode at least for now. You can + * get a mode similar to XR by using 5MHz bwmode. */ -#define MODULATION_XR 0x00000200 -/* - * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a - * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s - * signaling rate achieved through the bonding of two 54Mbit/s 802.11g - * channels. To use this feature your Access Point must also suport it. + + +/** + * DOC: Atheros SuperAG + * + * In addition to XR we have another modulation scheme called TURBO mode + * that is supposed to provide a throughput transmission speed up to 40Mbit/s + * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two + * 54Mbit/s 802.11g channels. To use this feature both ends must support it. * There is also a distinction between "static" and "dynamic" turbo modes: * * - Static: is the dumb version: devices set to this mode stick to it until * the mode is turned off. + * * - Dynamic: is the intelligent version, the network decides itself if it * is ok to use turbo. As soon as traffic is detected on adjacent channels * (which would get used in turbo mode), or when a non-turbo station joins @@ -385,63 +412,113 @@ struct ath5k_srev_name { * * http://www.pcworld.com/article/id,113428-page,1/article.html * - * The channel bonding seems to be driver specific though. In addition to - * deciding what channels will be used, these "Turbo" modes are accomplished - * by also enabling the following features: + * The channel bonding seems to be driver specific though. + * + * In addition to TURBO modes we also have the following features for even + * greater speed-up: * * - Bursting: allows multiple frames to be sent at once, rather than pausing * after each frame. Bursting is a standards-compliant feature that can be * used with any Access Point. + * * - Fast frames: increases the amount of information that can be sent per * frame, also resulting in a reduction of transmission overhead. It is a * proprietary feature that needs to be supported by the Access Point. + * * - Compression: data frames are compressed in real time using a Lempel Ziv * algorithm. This is done transparently. Once this feature is enabled, * compression and decompression takes place inside the chipset, without * putting additional load on the host CPU. * + * As with XR we also don't plan to support SuperAG features for now. You can + * get a mode similar to TURBO by using 40MHz bwmode. */ -#define MODULATION_TURBO 0x00000080 + +/** + * enum ath5k_driver_mode - PHY operation mode + * @AR5K_MODE_11A: 802.11a + * @AR5K_MODE_11B: 802.11b + * @AR5K_MODE_11G: 801.11g + * @AR5K_MODE_MAX: Used for boundary checks + * + * Do not change the order here, we use these as + * array indices and it also maps EEPROM structures. + */ enum ath5k_driver_mode { AR5K_MODE_11A = 0, - AR5K_MODE_11A_TURBO = 1, - AR5K_MODE_11B = 2, - AR5K_MODE_11G = 3, - AR5K_MODE_11G_TURBO = 4, - AR5K_MODE_XR = 0, - AR5K_MODE_MAX = 5 + AR5K_MODE_11B = 1, + AR5K_MODE_11G = 2, + AR5K_MODE_MAX = 3 }; +/** + * enum ath5k_ant_mode - Antenna operation mode + * @AR5K_ANTMODE_DEFAULT: Default antenna setup + * @AR5K_ANTMODE_FIXED_A: Only antenna A is present + * @AR5K_ANTMODE_FIXED_B: Only antenna B is present + * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap + * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc + * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc + * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- + * @AR5K_ANTMODE_MAX: Used for boundary checks + * + * For more infos on antenna control check out phy.c + */ enum ath5k_ant_mode { - AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */ - AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */ - AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */ - AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */ - AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */ - AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */ - AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */ + AR5K_ANTMODE_DEFAULT = 0, + AR5K_ANTMODE_FIXED_A = 1, + AR5K_ANTMODE_FIXED_B = 2, + AR5K_ANTMODE_SINGLE_AP = 3, + AR5K_ANTMODE_SECTOR_AP = 4, + AR5K_ANTMODE_SECTOR_STA = 5, + AR5K_ANTMODE_DEBUG = 6, AR5K_ANTMODE_MAX, }; +/** + * enum ath5k_bw_mode - Bandwidth operation mode + * @AR5K_BWMODE_DEFAULT: 20MHz, default operation + * @AR5K_BWMODE_5MHZ: Quarter rate + * @AR5K_BWMODE_10MHZ: Half rate + * @AR5K_BWMODE_40MHZ: Turbo + */ +enum ath5k_bw_mode { + AR5K_BWMODE_DEFAULT = 0, + AR5K_BWMODE_5MHZ = 1, + AR5K_BWMODE_10MHZ = 2, + AR5K_BWMODE_40MHZ = 3 +}; + + /****************\ TX DEFINITIONS \****************/ -/* - * TX Status descriptor +/** + * struct ath5k_tx_status - TX Status descriptor + * @ts_seqnum: Sequence number + * @ts_tstamp: Timestamp + * @ts_status: Status code + * @ts_final_idx: Final transmission series index + * @ts_final_retry: Final retry count + * @ts_rssi: RSSI for received ACK + * @ts_shortretry: Short retry count + * @ts_virtcol: Virtual collision count + * @ts_antenna: Antenna used + * + * TX status descriptor gets filled by the hw + * on each transmission attempt. */ struct ath5k_tx_status { u16 ts_seqnum; u16 ts_tstamp; u8 ts_status; - u8 ts_rate[4]; - u8 ts_retry[4]; u8 ts_final_idx; + u8 ts_final_retry; s8 ts_rssi; u8 ts_shortretry; - u8 ts_longretry; u8 ts_virtcol; u8 ts_antenna; }; @@ -455,7 +532,6 @@ struct ath5k_tx_status { * enum ath5k_tx_queue - Queue types used to classify tx queues. * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue * @AR5K_TX_QUEUE_DATA: A normal data queue - * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue * @AR5K_TX_QUEUE_BEACON: The beacon queue * @AR5K_TX_QUEUE_CAB: The after-beacon queue * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue @@ -463,7 +539,6 @@ struct ath5k_tx_status { enum ath5k_tx_queue { AR5K_TX_QUEUE_INACTIVE = 0, AR5K_TX_QUEUE_DATA, - AR5K_TX_QUEUE_XR_DATA, AR5K_TX_QUEUE_BEACON, AR5K_TX_QUEUE_CAB, AR5K_TX_QUEUE_UAPSD, @@ -472,36 +547,46 @@ enum ath5k_tx_queue { #define AR5K_NUM_TX_QUEUES 10 #define AR5K_NUM_TX_QUEUES_NOQCU 2 -/* - * Queue syb-types to classify normal data queues. +/** + * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues + * @AR5K_WME_AC_BK: Background traffic + * @AR5K_WME_AC_BE: Best-effort (normal) traffic + * @AR5K_WME_AC_VI: Video traffic + * @AR5K_WME_AC_VO: Voice traffic + * * These are the 4 Access Categories as defined in * WME spec. 0 is the lowest priority and 4 is the * highest. Normal data that hasn't been classified * goes to the Best Effort AC. */ enum ath5k_tx_queue_subtype { - AR5K_WME_AC_BK = 0, /*Background traffic*/ - AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ - AR5K_WME_AC_VI, /*Video traffic*/ - AR5K_WME_AC_VO, /*Voice traffic*/ + AR5K_WME_AC_BK = 0, + AR5K_WME_AC_BE, + AR5K_WME_AC_VI, + AR5K_WME_AC_VO, }; -/* - * Queue ID numbers as returned by the hw functions, each number - * represents a hw queue. If hw does not support hw queues - * (eg 5210) all data goes in one queue. These match - * d80211 definitions (net80211/MadWiFi don't use them). +/** + * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions + * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index + * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index + * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue + * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue + * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, + * + * Each number represents a hw queue. If hw does not support hw queues + * (eg 5210) all data goes in one queue. */ enum ath5k_tx_queue_id { AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, - AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ - AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ - AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ - AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ - AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ - AR5K_TX_QUEUE_ID_UAPSD = 8, - AR5K_TX_QUEUE_ID_XR_DATA = 9, + AR5K_TX_QUEUE_ID_DATA_MIN = 0, + AR5K_TX_QUEUE_ID_DATA_MAX = 3, + AR5K_TX_QUEUE_ID_UAPSD = 7, + AR5K_TX_QUEUE_ID_CAB = 8, + AR5K_TX_QUEUE_ID_BEACON = 9, }; /* @@ -522,25 +607,70 @@ enum ath5k_tx_queue_id { #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ -/* - * A struct to hold tx queue's parameters +/** + * struct ath5k_txq - Transmit queue state + * @qnum: Hardware q number + * @link: Link ptr in last TX desc + * @q: Transmit queue (&struct list_head) + * @lock: Lock on q and link + * @setup: Is the queue configured + * @txq_len:Number of queued buffers + * @txq_max: Max allowed num of queued buffers + * @txq_poll_mark: Used to check if queue got stuck + * @txq_stuck: Queue stuck counter + * + * One of these exists for each hardware transmit queue. + * Packets sent to us from above are assigned to queues based + * on their priority. Not all devices support a complete set + * of hardware transmit queues. For those devices the array + * sc_ac2q will map multiple priorities to fewer hardware queues + * (typically all to one hardware queue). + */ +struct ath5k_txq { + unsigned int qnum; + u32 *link; + struct list_head q; + spinlock_t lock; + bool setup; + int txq_len; + int txq_max; + bool txq_poll_mark; + unsigned int txq_stuck; +}; + +/** + * struct ath5k_txq_info - A struct to hold TX queue's parameters + * @tqi_type: One of enum ath5k_tx_queue + * @tqi_subtype: One of enum ath5k_tx_queue_subtype + * @tqi_flags: TX queue flags (see above) + * @tqi_aifs: Arbitrated Inter-frame Space + * @tqi_cw_min: Minimum Contention Window + * @tqi_cw_max: Maximum Contention Window + * @tqi_cbr_period: Constant bit rate period + * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled */ struct ath5k_txq_info { enum ath5k_tx_queue tqi_type; enum ath5k_tx_queue_subtype tqi_subtype; - u16 tqi_flags; /* Tx queue flags (see above) */ - u8 tqi_aifs; /* Arbitrated Interframe Space */ - u16 tqi_cw_min; /* Minimum Contention Window */ - u16 tqi_cw_max; /* Maximum Contention Window */ - u32 tqi_cbr_period; /* Constant bit rate period */ + u16 tqi_flags; + u8 tqi_aifs; + u16 tqi_cw_min; + u16 tqi_cw_max; + u32 tqi_cbr_period; u32 tqi_cbr_overflow_limit; u32 tqi_burst_time; - u32 tqi_ready_time; /* Time queue waits after an event */ + u32 tqi_ready_time; }; -/* - * Transmit packet types. - * used on tx control descriptor +/** + * enum ath5k_pkt_type - Transmit packet types + * @AR5K_PKT_TYPE_NORMAL: Normal data + * @AR5K_PKT_TYPE_ATIM: ATIM + * @AR5K_PKT_TYPE_PSPOLL: PS-Poll + * @AR5K_PKT_TYPE_BEACON: Beacon + * @AR5K_PKT_TYPE_PROBE_RESP: Probe response + * @AR5K_PKT_TYPE_PIFS: PIFS + * Used on tx control descriptor */ enum ath5k_pkt_type { AR5K_PKT_TYPE_NORMAL = 0, @@ -563,27 +693,23 @@ enum ath5k_pkt_type { (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ ) -/* - * DMA size definitions (2^(n+2)) - */ -enum ath5k_dmasize { - AR5K_DMASIZE_4B = 0, - AR5K_DMASIZE_8B, - AR5K_DMASIZE_16B, - AR5K_DMASIZE_32B, - AR5K_DMASIZE_64B, - AR5K_DMASIZE_128B, - AR5K_DMASIZE_256B, - AR5K_DMASIZE_512B -}; /****************\ RX DEFINITIONS \****************/ -/* - * RX Status descriptor +/** + * struct ath5k_rx_status - RX Status descriptor + * @rs_datalen: Data length + * @rs_tstamp: Timestamp + * @rs_status: Status code + * @rs_phyerr: PHY error mask + * @rs_rssi: RSSI in 0.5dbm units + * @rs_keyix: Index to the key used for decrypting + * @rs_rate: Rate used to decode the frame + * @rs_antenna: Antenna used to receive the frame + * @rs_more: Indicates this is a frame fragment (Fast frames) */ struct ath5k_rx_status { u16 rs_datalen; @@ -602,8 +728,8 @@ struct ath5k_rx_status { #define AR5K_RXERR_FIFO 0x04 #define AR5K_RXERR_DECRYPT 0x08 #define AR5K_RXERR_MIC 0x10 -#define AR5K_RXKEYIX_INVALID ((u8) - 1) -#define AR5K_TXKEYIX_INVALID ((u32) - 1) +#define AR5K_RXKEYIX_INVALID ((u8) -1) +#define AR5K_TXKEYIX_INVALID ((u32) -1) /**************************\ @@ -625,10 +751,18 @@ struct ath5k_rx_status { #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) + /*******************************\ GAIN OPTIMIZATION DEFINITIONS \*******************************/ +/** + * enum ath5k_rfgain - RF Gain optimization engine state + * @AR5K_RFGAIN_INACTIVE: Engine disabled + * @AR5K_RFGAIN_ACTIVE: Probe active + * @AR5K_RFGAIN_READ_REQUESTED: Probe requested + * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change + */ enum ath5k_rfgain { AR5K_RFGAIN_INACTIVE = 0, AR5K_RFGAIN_ACTIVE, @@ -636,6 +770,16 @@ enum ath5k_rfgain { AR5K_RFGAIN_NEED_CHANGE, }; +/** + * struct ath5k_gain - RF Gain optimization engine state data + * @g_step_idx: Current step index + * @g_current: Current gain + * @g_target: Target gain + * @g_low: Low gain boundary + * @g_high: High gain boundary + * @g_f_corr: Gain_F correction + * @g_state: One of enum ath5k_rfgain + */ struct ath5k_gain { u8 g_step_idx; u8 g_current; @@ -646,6 +790,8 @@ struct ath5k_gain { u8 g_state; }; + + /********************\ COMMON DEFINITIONS \********************/ @@ -654,42 +800,14 @@ struct ath5k_gain { #define AR5K_SLOT_TIME_20 880 #define AR5K_SLOT_TIME_MAX 0xffff -/* channel_flags */ -#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ -#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ -#define CHANNEL_CCK 0x0020 /* CCK channel */ -#define CHANNEL_OFDM 0x0040 /* OFDM channel */ -#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ -#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ -#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ -#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ -#define CHANNEL_XR 0x0800 /* XR channel */ - -#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) -#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) -#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) -#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_108A CHANNEL_T -#define CHANNEL_108G CHANNEL_TG -#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) - -#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ - CHANNEL_TURBO) - -#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) -#define CHANNEL_MODES CHANNEL_ALL - -/* - * Used internaly for reset_tx_queue). - * Also see struct struct ieee80211_channel. - */ -#define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0) -#define IS_CHAN_B(_c) ((_c->hw_value & CHANNEL_B) != 0) - -/* - * The following structure is used to map 2GHz channels to - * 5GHz Atheros channels. +/** + * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 + * @a2_flags: Channel flags (internal) + * @a2_athchan: HW channel number (internal) + * + * This structure is used to map 2GHz channels to + * 5GHz Atheros channels on 2111 frequency converter + * that comes together with RF5111 * TODO: Clean up */ struct ath5k_athchan_2ghz { @@ -697,36 +815,80 @@ struct ath5k_athchan_2ghz { u16 a2_athchan; }; +/** + * enum ath5k_dmasize - DMA size definitions (2^(n+2)) + * @AR5K_DMASIZE_4B: 4Bytes + * @AR5K_DMASIZE_8B: 8Bytes + * @AR5K_DMASIZE_16B: 16Bytes + * @AR5K_DMASIZE_32B: 32Bytes + * @AR5K_DMASIZE_64B: 64Bytes (Default) + * @AR5K_DMASIZE_128B: 128Bytes + * @AR5K_DMASIZE_256B: 256Bytes + * @AR5K_DMASIZE_512B: 512Bytes + * + * These are used to set DMA burst size on hw + * + * Note: Some platforms can't handle more than 4Bytes + * be careful on embedded boards. + */ +enum ath5k_dmasize { + AR5K_DMASIZE_4B = 0, + AR5K_DMASIZE_8B, + AR5K_DMASIZE_16B, + AR5K_DMASIZE_32B, + AR5K_DMASIZE_64B, + AR5K_DMASIZE_128B, + AR5K_DMASIZE_256B, + AR5K_DMASIZE_512B +}; + + /******************\ RATE DEFINITIONS \******************/ /** - * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. + * DOC: Rate codes + * + * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. * * The rate code is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control * and settings. * - * This is the hardware rate map we are aware of: - * - * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 - * rate_kbps 3000 1000 ? ? ? 2000 500 48000 + * This is the hardware rate map we are aware of (html unfriendly): * - * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 - * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? + * Rate code Rate (Kbps) + * --------- ----------- + * 0x01 3000 (XR) + * 0x02 1000 (XR) + * 0x03 250 (XR) + * 0x04 - 05 -Reserved- + * 0x06 2000 (XR) + * 0x07 500 (XR) + * 0x08 48000 (OFDM) + * 0x09 24000 (OFDM) + * 0x0A 12000 (OFDM) + * 0x0B 6000 (OFDM) + * 0x0C 54000 (OFDM) + * 0x0D 36000 (OFDM) + * 0x0E 18000 (OFDM) + * 0x0F 9000 (OFDM) + * 0x10 - 17 -Reserved- + * 0x18 11000L (CCK) + * 0x19 5500L (CCK) + * 0x1A 2000L (CCK) + * 0x1B 1000L (CCK) + * 0x1C 11000S (CCK) + * 0x1D 5500S (CCK) + * 0x1E 2000S (CCK) + * 0x1F -Reserved- * - * rate_code 17 18 19 20 21 22 23 24 - * rate_kbps ? ? ? ? ? ? ? 11000 - * - * rate_code 25 26 27 28 29 30 31 32 - * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? - * - * "S" indicates CCK rates with short preamble. + * "S" indicates CCK rates with short preamble and "L" with long preamble. * * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the - * lowest 4 bits, so they are the same as below with a 0xF mask. + * lowest 4 bits, so they are the same as above with a 0xF mask. * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). * We handle this in ath5k_setup_bands(). */ @@ -746,13 +908,9 @@ struct ath5k_athchan_2ghz { #define ATH5K_RATE_CODE_36M 0x0D #define ATH5K_RATE_CODE_48M 0x08 #define ATH5K_RATE_CODE_54M 0x0C -/* XR */ -#define ATH5K_RATE_CODE_XR_500K 0x07 -#define ATH5K_RATE_CODE_XR_1M 0x02 -#define ATH5K_RATE_CODE_XR_2M 0x06 -#define ATH5K_RATE_CODE_XR_3M 0x01 -/* adding this flag to rate_code enables short preamble */ +/* Adding this flag to rate_code on B rates + * enables short preamble */ #define AR5K_SET_SHORT_PREAMBLE 0x04 /* @@ -760,6 +918,7 @@ struct ath5k_athchan_2ghz { */ #define AR5K_KEYCACHE_SIZE 8 +extern bool ath5k_modparam_nohwcrypt; /***********************\ HW RELATED DEFINITIONS @@ -768,11 +927,11 @@ struct ath5k_athchan_2ghz { /* * Misc definitions */ -#define AR5K_RSSI_EP_MULTIPLIER (1<<7) +#define AR5K_RSSI_EP_MULTIPLIER (1 << 7) #define AR5K_ASSERT_ENTRY(_e, _s) do { \ if (_e >= _s) \ - return (false); \ + return false; \ } while (0) /* @@ -781,54 +940,70 @@ struct ath5k_athchan_2ghz { /** * enum ath5k_int - Hardware interrupt masks helpers + * @AR5K_INT_RXOK: Frame successfully received + * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor + * @AR5K_INT_RXERR: Frame reception failed + * @AR5K_INT_RXNOFRM: No frame received within a specified time period + * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors + * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is + * not always fatal, on some chips we can continue operation + * without resetting the card, that's why %AR5K_INT_FATAL is not + * common for all chips. + * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts + * + * @AR5K_INT_TXOK: Frame transmission success + * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor + * @AR5K_INT_TXERR: Frame transmission failure + * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The + * Queue Control Unit (QCU) signals an EOL interrupt only if a + * descriptor's LinkPtr is NULL. For more details, refer to: + * "http://www.freepatentsonline.com/20030225739.html" + * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period + * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should + * increase the TX trigger threshold. + * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts * - * @AR5K_INT_RX: mask to identify received frame interrupts, of type - * AR5K_ISR_RXOK or AR5K_ISR_RXERR - * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) - * @AR5K_INT_RXNOFRM: No frame received (?) - * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The - * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's - * LinkPtr is NULL. For more details, refer to: - * http://www.freepatentsonline.com/20030225739.html - * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). - * Note that Rx overrun is not always fatal, on some chips we can continue - * operation without reseting the card, that's why int_fatal is not - * common for all chips. - * @AR5K_INT_TX: mask to identify received frame interrupts, of type - * AR5K_ISR_TXOK or AR5K_ISR_TXERR - * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) - * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold - * We currently do increments on interrupt by - * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or - * one of the PHY error counters reached the maximum value and should be - * read and cleared. + * one of the PHY error counters reached the maximum value and + * should be read and cleared. + * @AR5K_INT_SWI: Software triggered interrupt. * @AR5K_INT_RXPHY: RX PHY Error * @AR5K_INT_RXKCM: RX Key cache miss * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a - * beacon that must be handled in software. The alternative is if you - * have VEOL support, in that case you let the hardware deal with things. + * beacon that must be handled in software. The alternative is if + * you have VEOL support, in that case you let the hardware deal + * with things. + * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing - * beacons from the AP have associated with, we should probably try to - * reassociate. When in IBSS mode this might mean we have not received - * any beacons from any local stations. Note that every station in an - * IBSS schedules to send beacons at the Target Beacon Transmission Time - * (TBTT) with a random backoff. - * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? - * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now - * until properly handled - * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA - * errors. These types of errors we can enable seem to be of type - * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. + * beacons from the AP have associated with, we should probably + * try to reassociate. When in IBSS mode this might mean we have + * not received any beacons from any local stations. Note that + * every station in an IBSS schedules to send beacons at the + * Target Beacon Transmission Time (TBTT) with a random backoff. + * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. + * @AR5K_INT_TIM: Beacon with local station's TIM bit set + * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received + * @AR5K_INT_DTIM_SYNC: DTIM sync lost + * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to + * our GPIO pins. + * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting + * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got + * nothing or an incomplete CAB frame sequence. + * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired + * @AR5K_INT_QCBRURN: A queue got triggered wile empty + * @AR5K_INT_QTRIG: A queue got triggered + * + * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA + * errors. Indicates we need to reset the card. * @AR5K_INT_GLOBAL: Used to clear and set the IER - * @AR5K_INT_NOCARD: signals the card has been removed - * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same - * bit value + * @AR5K_INT_NOCARD: Signals the card has been removed + * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same + * bit value * * These are mapped to take advantage of some common bits * between the MACs, to be able to set intr properties * easier. Some of them are not used yet inside hw.c. Most map - * to the respective hw interrupt value as they are common amogst different + * to the respective hw interrupt value as they are common among different * MACs. */ enum ath5k_int { @@ -859,12 +1034,25 @@ enum ath5k_int { AR5K_INT_GPIO = 0x01000000, AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ - AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ - AR5K_INT_QCBRORN = 0x10000000, /* Non common */ - AR5K_INT_QCBRURN = 0x20000000, /* Non common */ - AR5K_INT_QTRIG = 0x40000000, /* Non common */ + AR5K_INT_QCBRORN = 0x08000000, /* Non common */ + AR5K_INT_QCBRURN = 0x10000000, /* Non common */ + AR5K_INT_QTRIG = 0x20000000, /* Non common */ AR5K_INT_GLOBAL = 0x80000000, + AR5K_INT_TX_ALL = AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN, + + AR5K_INT_RX_ALL = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN, + AR5K_INT_COMMON = AR5K_INT_RXOK | AR5K_INT_RXDESC | AR5K_INT_RXERR @@ -890,15 +1078,32 @@ enum ath5k_int { AR5K_INT_NOCARD = 0xffffffff }; -/* mask which calibration is active at the moment */ +/** + * enum ath5k_calibration_mask - Mask which calibration is active at the moment + * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) + * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) + * @AR5K_CALIBRATION_NF: Noise Floor calibration + * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity + */ enum ath5k_calibration_mask { AR5K_CALIBRATION_FULL = 0x01, AR5K_CALIBRATION_SHORT = 0x02, - AR5K_CALIBRATION_ANI = 0x04, + AR5K_CALIBRATION_NF = 0x04, + AR5K_CALIBRATION_ANI = 0x08, }; -/* - * Power management +/** + * enum ath5k_power_mode - Power management modes + * @AR5K_PM_UNDEFINED: Undefined + * @AR5K_PM_AUTO: Allow card to sleep if possible + * @AR5K_PM_AWAKE: Force card to wake up + * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) + * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration + * + * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO + * are also known to have problems on some cards. This is not a big + * problem though because we can have almost the same effect as + * FULL_SLEEP by putting card on warm reset (it's almost powered down). */ enum ath5k_power_mode { AR5K_PM_UNDEFINED = 0, @@ -924,41 +1129,12 @@ enum ath5k_power_mode { #define AR5K_SOFTLED_ON 0 #define AR5K_SOFTLED_OFF 1 -/* - * Chipset capabilities -see ath5k_hw_get_capability- - * get_capability function is not yet fully implemented - * in ath5k so most of these don't work yet... - * TODO: Implement these & merge with _TUNE_ stuff above - */ -enum ath5k_capability_type { - AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ - AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ - AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ - AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ - AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ - AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ - AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ - AR5K_CAP_COMPRESSION = 8, /* Supports compression */ - AR5K_CAP_BURST = 9, /* Supports packet bursting */ - AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ - AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ - AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ - AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ - AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ - AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ - AR5K_CAP_XR = 16, /* Supports XR mode */ - AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ - AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ - AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ - AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ -}; - /* XXX: we *may* move cap_range stuff to struct wiphy */ struct ath5k_capabilities { /* * Supported PHY modes - * (ie. CHANNEL_A, CHANNEL_B, ...) + * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...) */ DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); @@ -985,29 +1161,77 @@ struct ath5k_capabilities { } cap_queues; bool cap_has_phyerr_counters; + bool cap_has_mrr_support; + bool cap_needs_2GHz_ovr; }; /* size of noise floor history (keep it a power of two) */ #define ATH5K_NF_CAL_HIST_MAX 8 -struct ath5k_nfcal_hist -{ +struct ath5k_nfcal_hist { s16 index; /* current index into nfval */ s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ }; -/** - * struct avg_val - Helper structure for average calculation - * @avg: contains the actual average value - * @avg_weight: is used internally during calculation to prevent rounding errors +#define ATH5K_LED_MAX_NAME_LEN 31 + +/* + * State for LED triggers */ -struct ath5k_avg_val { - int avg; - int avg_weight; +struct ath5k_led { + char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ + struct ath5k_hw *ah; /* driver state */ + struct led_classdev led_dev; /* led classdev */ +}; + +/* Rfkill */ +struct ath5k_rfkill { + /* GPIO PIN for rfkill */ + u16 gpio; + /* polarity of rfkill GPIO PIN */ + bool polarity; + /* RFKILL toggle tasklet */ + struct tasklet_struct toggleq; }; -/***************************************\ - HARDWARE ABSTRACTION LAYER STRUCTURE -\***************************************/ +/* statistics */ +struct ath5k_statistics { + /* antenna use */ + unsigned int antenna_rx[5]; /* frames count per antenna RX */ + unsigned int antenna_tx[5]; /* frames count per antenna TX */ + + /* frame errors */ + unsigned int rx_all_count; /* all RX frames, including errors */ + unsigned int tx_all_count; /* all TX frames, including errors */ + unsigned int rx_bytes_count; /* all RX bytes, including errored pkts + * and the MAC headers for each packet + */ + unsigned int tx_bytes_count; /* all TX bytes, including errored pkts + * and the MAC headers and padding for + * each packet. + */ + unsigned int rxerr_crc; + unsigned int rxerr_phy; + unsigned int rxerr_phy_code[32]; + unsigned int rxerr_fifo; + unsigned int rxerr_decrypt; + unsigned int rxerr_mic; + unsigned int rxerr_proc; + unsigned int rxerr_jumbo; + unsigned int txerr_retry; + unsigned int txerr_fifo; + unsigned int txerr_filt; + + /* MIB counters */ + unsigned int ack_fail; + unsigned int rts_fail; + unsigned int rts_ok; + unsigned int fcs_error; + unsigned int beacons; + + unsigned int mib_intr; + unsigned int rxorn_intr; + unsigned int rxeol_intr; +}; /* * Misc defines @@ -1016,23 +1240,118 @@ struct ath5k_avg_val { #define AR5K_MAX_GPIO 10 #define AR5K_MAX_RF_BANKS 8 -/* TODO: Clean up and merge with ath5k_softc */ +#if CHAN_DEBUG +#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) +#else +#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) +#endif + +#define ATH_RXBUF 40 /* number of RX buffers */ +#define ATH_TXBUF 200 /* number of TX buffers */ +#define ATH_BCBUF 4 /* number of beacon buffers */ +#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ +#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ + +/* Driver state associated with an instance of a device */ struct ath5k_hw { struct ath_common common; - struct ath5k_softc *ah_sc; - void __iomem *ah_iobase; + struct pci_dev *pdev; + struct device *dev; /* for dma mapping */ + int irq; + u16 devid; + void __iomem *iobase; /* address of the device */ + struct mutex lock; /* dev-level lock */ + struct ieee80211_hw *hw; /* IEEE 802.11 common */ + struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; + struct ieee80211_channel channels[ATH_CHAN_MAX]; + struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; + s8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; + enum nl80211_iftype opmode; + +#ifdef CONFIG_ATH5K_DEBUG + struct ath5k_dbg_info debug; /* debug info */ +#endif /* CONFIG_ATH5K_DEBUG */ + + struct ath5k_buf *bufptr; /* allocated buffer ptr */ + struct ath5k_desc *desc; /* TX/RX descriptors */ + dma_addr_t desc_daddr; /* DMA (physical) address */ + size_t desc_len; /* size of TX/RX descriptors */ + + DECLARE_BITMAP(status, 4); +#define ATH_STAT_INVALID 0 /* disable hardware accesses */ +#define ATH_STAT_PROMISC 1 +#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ +#define ATH_STAT_STARTED 3 /* opened & irqs enabled */ + + unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ + struct ieee80211_channel *curchan; /* current h/w channel */ + + u16 nvifs; + + enum ath5k_int imask; /* interrupt mask copy */ + + spinlock_t irqlock; + bool rx_pending; /* rx tasklet pending */ + bool tx_pending; /* tx tasklet pending */ + + u8 bssidmask[ETH_ALEN]; + + unsigned int led_pin, /* GPIO pin for driving LED */ + led_on; /* pin setting for LED on */ + + struct work_struct reset_work; /* deferred chip reset */ + struct work_struct calib_work; /* deferred phy calibration */ + + struct list_head rxbuf; /* receive buffer */ + spinlock_t rxbuflock; + u32 *rxlink; /* link ptr in last RX desc */ + struct tasklet_struct rxtq; /* rx intr tasklet */ + struct ath5k_led rx_led; /* rx led */ + + struct list_head txbuf; /* transmit buffer */ + spinlock_t txbuflock; + unsigned int txbuf_len; /* buf count in txbuf list */ + struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ + struct tasklet_struct txtq; /* tx intr tasklet */ + struct ath5k_led tx_led; /* tx led */ + + struct ath5k_rfkill rf_kill; + + spinlock_t block; /* protects beacon */ + struct tasklet_struct beacontq; /* beacon intr tasklet */ + struct list_head bcbuf; /* beacon buffer */ + struct ieee80211_vif *bslot[ATH_BCBUF]; + u16 num_ap_vifs; + u16 num_adhoc_vifs; + u16 num_mesh_vifs; + unsigned int bhalq, /* SW q for outgoing beacons */ + bmisscount, /* missed beacon transmits */ + bintval, /* beacon interval in TU */ + bsent; + unsigned int nexttbtt; /* next beacon time in TU */ + struct ath5k_txq *cabq; /* content after beacon */ + + bool assoc; /* associate state */ + bool enable_beacon; /* true if beacons are on */ + + struct ath5k_statistics stats; + + struct ath5k_ani_state ani_state; + struct tasklet_struct ani_tasklet; /* ANI calibration */ + + struct delayed_work tx_complete_work; + + struct survey_info survey; /* collected survey info */ enum ath5k_int ah_imr; struct ieee80211_channel *ah_current_channel; - bool ah_turbo; - bool ah_calibration; + bool ah_iq_cal_needed; bool ah_single_chip; enum ath5k_version ah_version; enum ath5k_radio ah_radio; - u32 ah_phy; u32 ah_mac_srev; u16 ah_mac_version; u16 ah_phy_revision; @@ -1042,15 +1361,21 @@ struct ath5k_hw { #define ah_modes ah_capabilities.cap_mode #define ah_ee_version ah_capabilities.cap_eeprom.ee_version - u32 ah_limit_tx_retries; + u8 ah_retry_long; + u8 ah_retry_short; + + u32 ah_use_32khz_clock; + u8 ah_coverage_class; + bool ah_ack_bitrate_high; + u8 ah_bwmode; + bool ah_short_slot; /* Antenna Control */ u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; u8 ah_ant_mode; u8 ah_tx_ant; u8 ah_def_ant; - bool ah_software_retry; struct ath5k_capabilities ah_capabilities; @@ -1065,7 +1390,13 @@ struct ath5k_hw { u32 ah_txq_imr_cbrurn; u32 ah_txq_imr_qtrig; u32 ah_txq_imr_nofrm; - u32 ah_txq_isr; + + u32 ah_txq_isr_txok_all; + u32 ah_txq_isr_txurn; + u32 ah_txq_isr_qcborn; + u32 ah_txq_isr_qcburn; + u32 ah_txq_isr_qtrig; + u32 *ah_rf_banks; size_t ah_rf_banks_size; size_t ah_rf_regs_count; @@ -1086,20 +1417,17 @@ struct ath5k_hw { /* Values in 0.25dB units */ s16 txp_min_pwr; s16 txp_max_pwr; + s16 txp_cur_pwr; /* Values in 0.5dB units */ s16 txp_offset; s16 txp_ofdm; s16 txp_cck_ofdm_gainf_delta; /* Value in dB units */ s16 txp_cck_ofdm_pwr_delta; + bool txp_setup; + int txp_requested; /* Requested tx power in dBm */ } ah_txpower; - struct { - bool r_enabled; - int r_last_alert; - struct ieee80211_channel r_last_channel; - } ah_radar; - struct ath5k_nfcal_hist ah_nfcal_hist; /* average beacon RSSI in our BSS (used by ANI) */ @@ -1110,8 +1438,8 @@ struct ath5k_hw { /* Calibration timestamp */ unsigned long ah_cal_next_full; + unsigned long ah_cal_next_short; unsigned long ah_cal_next_ani; - unsigned long ah_cal_next_nf; /* Calibration mask */ u8 ah_cal_mask; @@ -1129,39 +1457,57 @@ struct ath5k_hw { struct ath5k_rx_status *); }; +struct ath_bus_ops { + enum ath_bus_type ath_bus_type; + void (*read_cachesize)(struct ath_common *common, int *csz); + bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); + int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac); +}; + /* * Prototypes */ +extern const struct ieee80211_ops ath5k_hw_ops; + +/* Initialization and detach functions */ +int ath5k_hw_init(struct ath5k_hw *ah); +void ath5k_hw_deinit(struct ath5k_hw *ah); -/* Attach/Detach Functions */ -int ath5k_hw_attach(struct ath5k_softc *sc); -void ath5k_hw_detach(struct ath5k_hw *ah); +int ath5k_sysfs_register(struct ath5k_hw *ah); +void ath5k_sysfs_unregister(struct ath5k_hw *ah); -int ath5k_sysfs_register(struct ath5k_softc *sc); -void ath5k_sysfs_unregister(struct ath5k_softc *sc); +/*Chip id helper functions */ +int ath5k_hw_read_srev(struct ath5k_hw *ah); /* LED functions */ -int ath5k_init_leds(struct ath5k_softc *sc); -void ath5k_led_enable(struct ath5k_softc *sc); -void ath5k_led_off(struct ath5k_softc *sc); -void ath5k_unregister_leds(struct ath5k_softc *sc); +int ath5k_init_leds(struct ath5k_hw *ah); +void ath5k_led_enable(struct ath5k_hw *ah); +void ath5k_led_off(struct ath5k_hw *ah); +void ath5k_unregister_leds(struct ath5k_hw *ah); + /* Reset Functions */ -int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); +int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel); int ath5k_hw_on_hold(struct ath5k_hw *ah); int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, - struct ieee80211_channel *channel, bool change_channel); + struct ieee80211_channel *channel, bool fast, bool skip_pcu); int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); /* Power management functions */ + +/* Clock rate related functions */ +unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); +unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); +void ath5k_hw_set_clockrate(struct ath5k_hw *ah); + + /* DMA Related Functions */ void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); -int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); -void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); -int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue); u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); @@ -1171,38 +1517,43 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); +/* Init/Stop functions */ +void ath5k_hw_dma_init(struct ath5k_hw *ah); +int ath5k_hw_dma_stop(struct ath5k_hw *ah); /* EEPROM access functions */ int ath5k_eeprom_init(struct ath5k_hw *ah); void ath5k_eeprom_detach(struct ath5k_hw *ah); -int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); +int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel); /* Protocol Control Unit Functions */ -extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); +/* Helpers */ +int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band, + int len, struct ieee80211_rate *rate, bool shortpre); +unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); +unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); +int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); -/* BSSID Functions */ +/* RX filter control*/ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); void ath5k_hw_set_bssid(struct ath5k_hw *ah); void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); -/* Receive start/stop functions */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); -/* RX Filter functions */ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); +/* Receive (DRU) start/stop functions */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); /* Beacon control functions */ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); void ath5k_hw_reset_tsf(struct ath5k_hw *ah); -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); +void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, + u32 interval); bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); -/* ACK bit rate */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); -/* Clock rate related functions */ -unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); -unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); -void ath5k_hw_set_clockrate(struct ath5k_hw *ah); +/* Init function */ +void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); /* Queue Control Unit, DFS Control Unit Functions */ int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, @@ -1212,10 +1563,14 @@ int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); +void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, + unsigned int queue); u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); -int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); +int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time); +/* Init function */ +int ath5k_hw_init_queues(struct ath5k_hw *ah); /* Hardware Descriptor Functions */ int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); @@ -1225,6 +1580,7 @@ int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); + /* GPIO Functions */ void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); @@ -1234,31 +1590,31 @@ int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); -/* rfkill Functions */ + +/* RFkill Functions */ void ath5k_rfkill_hw_start(struct ath5k_hw *ah); void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); -/* Misc functions */ + +/* Misc functions TODO: Cleanup */ int ath5k_hw_set_capabilities(struct ath5k_hw *ah); -int ath5k_hw_get_capability(struct ath5k_hw *ah, - enum ath5k_capability_type cap_type, u32 capability, - u32 *result); int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); + /* Initial register settings functions */ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); -/* Initialize RF */ -int ath5k_hw_rfregs_init(struct ath5k_hw *ah, - struct ieee80211_channel *channel, - unsigned int mode); -int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq); + +/* PHY functions */ +/* Misc PHY functions */ +u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band); +int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* Gain_F optimization */ enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); /* PHY/RF channel functions */ -bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); -int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); +bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* PHY calibration */ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, @@ -1267,41 +1623,81 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); /* Spur mitigation */ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, struct ieee80211_channel *channel); -void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, - struct ieee80211_channel *channel); -/* Misc PHY functions */ -u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); -int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* Antenna control */ void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); /* TX power setup */ -int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - u8 ee_mode, u8 txpower); int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); +/* Init function */ +int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 mode, bool fast); /* - * Functions used internaly + * Functions used internally */ static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) { - return &ah->common; + return &ah->common; } static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) { - return &(ath5k_hw_common(ah)->regulatory); + return &(ath5k_hw_common(ah)->regulatory); +} + +#ifdef CONFIG_ATHEROS_AR231X +#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000) + +static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) +{ + /* On AR2315 and AR2317 the PCI clock domain registers + * are outside of the WMAC register space */ + if (unlikely((reg >= 0x4000) && (reg < 0x5000) && + (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) + return AR5K_AR2315_PCI_BASE + reg; + + return ah->iobase + reg; } static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) { - return ioread32(ah->ah_iobase + reg); + return ioread32(ath5k_ahb_reg(ah, reg)); } static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) { - iowrite32(val, ah->ah_iobase + reg); + iowrite32(val, ath5k_ahb_reg(ah, reg)); +} + +#else + +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return ioread32(ah->iobase + reg); +} + +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + iowrite32(val, ah->iobase + reg); +} + +#endif + +static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah) +{ + return ath5k_hw_common(ah)->bus_ops->ath_bus_type; +} + +static inline void ath5k_read_cachesize(struct ath_common *common, int *csz) +{ + common->bus_ops->read_cachesize(common, csz); +} + +static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data) +{ + struct ath_common *common = ath5k_hw_common(ah); + return common->bus_ops->eeprom_read(common, off, data); } static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) |