diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/eeprom.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/eeprom.h | 42 |
1 files changed, 9 insertions, 33 deletions
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index c4a6d5f26af..693296ee969 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -50,7 +50,7 @@ #define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ #define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (ar5211_rfregs) */ #define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ #define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ #define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ @@ -75,11 +75,11 @@ #define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) #define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) #define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz */ +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz */ #define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for < 2W power consumption */ #define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) /* Device type (1 Cardbus, 2 PCI, 3 MiniPCI, 4 AP) */ #define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */ +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz */ /* Newer EEPROMs are using a different offset */ #define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ @@ -120,7 +120,7 @@ #define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) /* disable fast frames */ #define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) /* disable bursting */ #define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) /* max number of QCUs. defaults to 10 */ -#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heayy clipping */ +#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heavy clipping */ #define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) /* key cache size. defaults to 128 */ #define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) @@ -182,6 +182,7 @@ #define AR5K_EEPROM_EEP_DELTA 10 #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 @@ -223,7 +224,7 @@ #define AR5K_EEPROM_CCK_OFDM_DELTA 15 #define AR5K_EEPROM_N_IQ_CAL 2 /* 5GHz/2GHz */ -enum ath5k_eeprom_freq_bands{ +enum ath5k_eeprom_freq_bands { AR5K_EEPROM_BAND_5GHZ = 0, AR5K_EEPROM_BAND_2GHZ = 1, AR5K_EEPROM_N_FREQ_BANDS, @@ -241,9 +242,8 @@ enum ath5k_eeprom_freq_bands{ #define AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz 6250 #define AR5K_EEPROM_READ(_o, _v) do { \ - ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \ - if (ret) \ - return ret; \ + if (!ath5k_hw_nvram_read(ah, (_o), &(_v))) \ + return -EIO; \ } while (0) #define AR5K_EEPROM_READ_HDR(_o, _v) \ @@ -269,32 +269,9 @@ enum ath5k_ctl_mode { AR5K_CTL_MODE_M = 15, }; -/* Default CTL ids for the 3 main reg domains. - * Atheros only uses these by default but vendors - * can have up to 32 different CTLs for different - * scenarios. Note that theese values are ORed with - * the mode id (above) so we can have up to 24 CTL - * datasets out of these 3 main regdomains. That leaves - * 8 ids that can be used by vendors and since 0x20 is - * missing from HAL sources i guess this is the set of - * custom CTLs vendors can use. */ -#define AR5K_CTL_FCC 0x10 -#define AR5K_CTL_CUSTOM 0x20 -#define AR5K_CTL_ETSI 0x30 -#define AR5K_CTL_MKK 0x40 - -/* Indicates a CTL with only mode set and - * no reg domain mapping, such CTLs are used - * for world roaming domains or simply when - * a reg domain is not set */ -#define AR5K_CTL_NO_REGDOMAIN 0xf0 - -/* Indicates an empty (invalid) CTL */ -#define AR5K_CTL_NO_CTL 0xff - /* Per channel calibration data, used for power table setup */ struct ath5k_chan_pcal_info_rf5111 { - /* Power levels in half dbm units + /* Power levels in half dBm units * for one power curve. */ u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; /* PCDAC table steps @@ -516,4 +493,3 @@ struct ath5k_eeprom_info { /* Antenna raw switch tables */ u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; }; - |