aboutsummaryrefslogtreecommitdiff
path: root/tcl/interface
AgeCommit message (Collapse)Author
2020-02-24coding style: add newline at end of text filesAntonio Borneo
Some text file is missing newline at EOF. Add it. Change-Id: Ieebc790096f40961283c644642e56fde975e957f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5167 Tested-by: jenkins
2020-02-23tcl/interface/ftdi: Add imx8mp-evk internal JTAG interfaceLeonard Crestez
The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-06tcl: fix remaining scripts after rework adapter commandsAntonio Borneo
Some script have been added or modified after the patches for reworking the adapter commands were pushed in gerrit. Such scripts use the old command syntax and trigger a "deprecated" warning at runtime. Fix them with the same sed commands used for the other scripts: sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Change-Id: I0824d6c506a9af3eb9129b74c02a92b4eb1b100d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5424 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins
2020-02-06tcl: Add interface config for isodebug isolated JTAG/SWD+UARTAndreas Fritiofson
Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-01-29tcl: replace the deprecated commands with "adapter ..."Antonio Borneo
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-29tcl: replace command "interface" with "adapter driver"Antonio Borneo
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with command sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5283 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-14stlink: add DAP direct driverAntonio Borneo
STLINK-V3 and the new firmware V2J24 for ST-LINK/V2 provide API to directly access the DAP registers. This mode permits to use the native target in cortex_m.c, with no need to override it with the target in hla_target.c. Other advantages wrt HLA are: support for Cortex-A cores, support for SoC multi-core and/or multi AP, support for OpenOCD commands "dap" thus including control of CSW. This obsoletes the existing HLA driver for ST-Link, that should anyway be kept for those cases where it's not possible to update the ST-Link firmware. This commit introduces the minimal implementation for direct DAP access. The implementation is much slower than the HLA because every memory transfer requires several USB packets. Further commits will close the performance gap. The whole ST-Link driver is compiled under BUILD_HLADAPTER, to remove the need to split the driver between the two modes. This has to be reworked, but it's quite invasive! A new interface file stlink-dap.cfg is added and should be used in place of stlink.cfg to enable the DAP mode. Documentation is updated and reports limitation on the maximum AP number that can be accessed by ST-Link for some firmware already tested. Change-Id: I932ffe16bc81d00b1fe489e2944fda13470cce9b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4904 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-10-15Update FTDI C232HM cfg, and add two new cfgs from cable modem researchAl Dyrius
Change-Id: Idbeffcd5ff4380b1e7c9fd5ef6ba3ca77cc22d99 Signed-off-by: Al Dyrius <aldyrius42@gmail.com> Reviewed-on: http://openocd.zylin.com/5307 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2018-12-06stlink: add support for STLINK-V3Antonio Borneo
Extend the driver to include the minimal functionality to support the HLA model. Due to the small change in the name (ST-LINK/V2 => STLINK-V3), fix the existing names in the comments in udev rules. Change-Id: Ied33e38063a6da81d9bf249ed195444d7cdf4f03 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4717 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2018-12-06stlink: add usb pid for v2.1 without mass storage deviceAntonio Borneo
New version of ST-Link/V2.1 without mass storage device. From debug point of view, it is compatible with existing ST-Link/V2.1 It uses a new USB PID because the USB endpoints and interfaces are different from usual ST-Link/V2.1 Add the new PID in the driver, in the tcl interface script and in the udev configuration script. Change-Id: Id2e1b5a5d0347c5d951a86a9cdb76be52cfd4ea3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4702 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2018-09-10interface: adapter configuration for FTDI C232HMSteven Stallion
This patch adds support for the C232HM-DDSL-0 and C232HM-EDSL-0 FT232H-based cables from FTDI. For more information, see: http://www.ftdichip.com/Products/Cables/USBMPSSE.htm Change-Id: Ic97423eb1e2f6b5ebae04943cd5cce86f38771d5 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/4081 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-05-31jtag/drivers: Add support for TI XDS110 debug probeEdward Fewell
Add support for the XDS110 debug probe using the APIs in the probe's firmware. Includes support for older versions of the firmware (with reduced performance) and support for a newer version that includes OpenOCD specific APIs. Tested on various TI LauchPads including MSP432P4, MSP432E4, CC2650, CC2652, and CC3220SF. Updated to add better support for swd switch. Removed issues found with clang static analysis. Updated to add rules entry for the XDS110 probe and Tiva DFU mode (which affects both XDS110 and ICDI probes). Change-Id: Ib274143111a68e67e80003797c6a68e3e80976b2 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4322 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-13jtag: drivers: add support for FT232R sync bitbang JTAG interfacesMatej Kogovsek
Change-Id: Ib88a9e270f5c2a50902a137bcc97fdefd5aad1c6 Signed-off-by: Matej Kogovsek <matej@hamradio.si> Reviewed-on: http://openocd.zylin.com/4215 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-03-13tcl: interface: usb blaster I: specify driver explicitlyPaul Fertser
When a user asks for blaster I, he or she should either get it, or get an error, not blaster II driver. Change-Id: Ibc7683676ce42773e2b14ea5ccb3d119d1e6acea Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/4381 Tested-by: jenkins
2018-03-12Add SWD protocol support to buspirate (2nd try)Mateusz Manowiecki
This is a second try for this patch. I removed the queues from the previous version. I made it compatible with SRST reset and added support for those features that could be supported in raw binary mode. Change-Id: I96fc06abbea9873e98b414f34afd9043fd9c2a41 Signed-off-by: Mateusz Manowiecki <segmentation@fault.pl> Reviewed-on: http://openocd.zylin.com/3960 Tested-by: jenkins Reviewed-by: Eric Work <work.eric@gmail.com> Reviewed-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Reviewed-by: Jacob Alexander <haata@kiibohd.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-03-07pipistrello: decrease jtag speed to 10 MHzRobert Jordens
30 MHz is not working reliably here Change-Id: I38f5f8c7153fc64e313ee911b1629fb5f1114c39 Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/4242 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-01-30tcl: interface: harmonise RPi configsPaul Fertser
Make all configs specify same JTAG and SWD GPIO numbers. Change-Id: I65b09c1671c97f253f0aab88e511de7409d91e0a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3932 Tested-by: jenkins
2018-01-13ftdi swd: disable SWD output pin during inputPatrick Stewart
* Disables the data output pin while SWD is reading, so that a simple FTDI SWD interface can be made by connecting TCK to SWD_CLK and TDI+TDO directly to SWDIO. Enabled by setting SWDIO_OE to 0. Change-Id: I7d3b71cf3f4eea163cb320aff69ed95d219190bd Signed-off-by: Patrick Stewart <patstew@gmail.com> Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com> Reviewed-on: http://openocd.zylin.com/2274 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2018-01-13digilent_jtag_smt2_nc: add supportRobert Jordens
The Digilent SMT2 NC is nominally the connector-less version of the SMT2. But neither the SMT2 configuration nor the HS3 configuration work for on the Xilinx KCU105 board where the SMT2 NC is used. Change-Id: Ieb27cbc6d8b0f9c64ef778e4e0c839acc85ec0ef Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/4187 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-12-12jtag: drivers: stlink: handle all versions with single configPaul Fertser
Extend HLA interface to allow multiple VID/PID pairs and use it to autodetect the connected stlink version. Change-Id: I35cd895b2260e23cf0e8fcb1fc11a78c2b99c69b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3961 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-10-27tcl/interface/ftdi/openrd: Fix FTDI channel + device descriptionJonathan McDowell
Similar to the Sheevaplug fix inf95f8b70fbd0f7e9c91a2d9006b1abb2dd07ebf2 the OpenRD device has its JTAG interface on the first channel of the ft2232, which is 0 for the new driver but was 1 for the old one. Correct the config file appropriately. Also the device description was missing the trailing " B" and thus not picking up the device correctly. Finally add an adapter_khz setting in the OpenRD board configuration file - set to 2MHz to match the Sheeva variant. Confirmed as working thanks to Phil Hands providing me access to his hardware to test on. See also Debian Bug#793214; https://bugs.debian.org/793214 Change-Id: Ifacf53124eaa330bbbdf36dfa79e3256bf2a5201 Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-on: http://openocd.zylin.com/4254 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-10-03tcl/interface/ftdi: improve minimodule configDiego Herranz
- Tested on a real FT2232H MiniModule, so warning removed. - Every pin initially set to high impedance except TCK, TDI, TDO and TMS: Safest values given it's an evaluation board and the rest of pins might be connected to something else. - Reset is now initially de-asserted (it was asserted which is not recommended). - nRST pin choice is arbitrary so comment added (wondering if it should be an "echo"). - "-oe" option added to NRST signal so it can be set as high impedance (tri-stated). Change-Id: I967ab0c7bbccf72dbf6d6d78b3180b74e016e0d6 Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com> Reviewed-on: http://openocd.zylin.com/4185 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-10-03tcl/interface/ftdi/sheevaplug: Fix FTDI channel configurationJonathan McDowell
The migration from the old ft2232 driver to the new generic ftdi driver ended up breaking support for the SheevaPlug device. The old driver defaulted to channel 1, but numbered the channels 1 to 4. The new driver starts at 0. The SheevaPlug JTAG is on interface A (interface B is the serial console), so it should be using channel 0. Fix this. Confirmed as working; serial console remains available and a new u-boot image can be transferred across using the JTAG link. See also Debian Bug#837989; https://bugs.debian.org/837989 Change-Id: I4ac2bfeb0d1e7e99d70fa47dc55f186e6af2c542 Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-on: http://openocd.zylin.com/4206 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins
2017-05-31imx_gpio: add mmap based jtag interface for IMX processorsGrzegorz Kostka
For some targets (like nrf51) sysfs driver is too slow. This patch implements memory maped driver for IMX processors. Mostly based on bcm2835gpio. Tested on imx6ul CPU. However, it should work on any NXP IMX CPU. Change-Id: Idace4c98181c6e9c64dd158bfa52631204b5c4a7 Signed-off-by: Grzegorz Kostka <kostka.grzegorz@gmail.com> Reviewed-on: http://openocd.zylin.com/4106 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-05-12jtag/drivers: Add Cypress KitProg driverForest Crossman
This patch adds a driver for the SWD-only Cypress KitProg programmer/debugger. Change-Id: I3a9a8011a762781d560ebb305597e782a4f9a8e5 Signed-off-by: Forest Crossman <cyrozap@gmail.com> Reviewed-on: http://openocd.zylin.com/3221 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-04-23added interface config file for In-Circuit's ICprog OpenOCD JTAG adapterMatthias Bock
Change-Id: I9f9758d3a30bbcca9f750f604e011e5cc25809c5 Signed-off-by: Matthias Bock <mail@matthiasbock.net> Reviewed-on: http://openocd.zylin.com/4107 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-06Remove support for the GPL incompatible FTDI D2XX libraryAndreas Fritiofson
Convert Presto, OpenJTAG and USB-Blaster (I) adapter drivers to libftdi only. Change-Id: Ib28887620a3dcbb754b9dbf87b9731acca3ac600 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3237 Tested-by: jenkins Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-06Remove since long deprecated ft2232 driverAndreas Fritiofson
Purge all legacy interface configurations so there's no more confusion over which one to use. Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just duplicates what INSTALL says. Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3236 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-08-14interface: Add XDS100v3 support.Remco Bloemen
XDS100v3 is software compatible with the XDS100v2, but has a different usb pid. This commit adds `xds100v3.cfg` that sources the v2 one and changes the usb pid. Change-Id: Ie29d325e8992d2de2f97d70862beeb63932ffa80 Signed-off-by: Remco Bloemen <openocd-gerrit@xn--2-umb.com> Reviewed-on: http://openocd.zylin.com/3632 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14tcl/interface/ftdi: add config for the MBFTDI adapterAntony Pavlov
MBFTDI is a very cheap FT2232-based JTAG adapter for programming Marsohod FPGA board. Please see http://www.marsohod.org/prodmbftdi for details. Change-Id: I35f758b49d1566098dc27f9581829cccad93ceeb Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/3604 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-04-12interface/jlink: Fix comment about serial numberMarc Schink
Leading zeros for the serial number are not necessary anymore. Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Change-Id: Ie4ff47b9cda7ccf314c6fda9a2784947db5ee4d9 Reviewed-on: http://openocd.zylin.com/3401 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13add Digilent HS2 supportAndrew Kohlsmith
Change-Id: If506c33f22d95f4c47f30c4348d461197c976fdd Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3160 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-03tcl: Support for the miniSpartan6+ board.Tim 'mithro' Ansell
* https://www.scarabhardware.com/minispartan6/ * https://github.com/scarabhardware/miniSpartan6-plus/raw/master/miniSpartan6%2B_Rev_B.pdf The miniSpartan6+ board is wired identically to the Pipistrello device but sadly doesn't have a custom device description. Change-Id: I07fd57b1ec87d72edf68860684928a3781e2f08a Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on: http://openocd.zylin.com/3117 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-11-16tcl/interface/ftdi: add 100ask's OpenJTAG configPaul Fertser
Schematics provided by Matthias Bock. Change-Id: I3d00453fece3b4df58a53bee21fff646a8b71a34 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2718 Tested-by: jenkins
2015-11-13topic: Interface config file for FTDI UM232H moduleRagnar Sundblad
Added interface config file for the FTDI FT232H based UM232H module. This should work with UM232H-B too, an even cheaper module, but that has not been tested. Change-Id: Ifc312d6741da0b7862fe07d854023190d7afe251 Signed-off-by: Ragnar Sundblad <raggesu@gmail.com> Reviewed-on: http://openocd.zylin.com/3031 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-21tcl: Setting lowlevel driver for ixo-usb-jtagTim 'mithro' Ansell
Also add further documentation about the project and how to use it. Change-Id: Ia9878de566b3c8c1ea29f129287d5aea904d861d Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on: http://openocd.zylin.com/2961 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-09-30tcl/interface/ftdi: Add Digilent JTAG-HS3 configAndreas Färber
Derived from tcl/interface/digilent-hs1.cfg. JTAG-HS3 has an open drain buffer on pin 14 for SRST to work with PS_SRST_B on Xilinx Zynq SoC. Change-Id: I1e9e72d0511528a61207e318aff937ae9fad5bf9 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2728 Tested-by: jenkins Reviewed-by: Robert Jordens <jordens@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06bcm2835gpio: Add SWD support, Raspberry Pi 2 support.Christoph Pittracher
Added support for SWD transport similar to sysfsgpio driver. Added configurable peripheral base address to support Raspberry Pi 2. Change-Id: If76d45fbe74ce49f1f22af72e5f246e973237e04 Signed-off-by: Christoph Pittracher <pitt@segfault.info> Reviewed-on: http://openocd.zylin.com/2802 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06kc705: digilent-jtag/kintex7/jtagspi boardRobert Jordens
Xilinx Kintex7 Development board with integrated Digilent JTAG-SMT1 (a.k.a. HS1) interface and a 128 MBit SPI flash. Change-Id: I9daba0a2fb2c17e04bcb37bd41872ebde25e0d2f Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/2861 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06pipistrello: ftdi-jtag/spartan6/jtagspi boardRobert Jordens
The Pipistrello is a low cost FPGA board with a Xilinx Spartan6 LX45, a SPI flash and onboard FTDI JTAG. This board is a good example use case for the jtagspi flash driver talking through a proxy bitstream. Change-Id: I04a80610ff825c36ebcb67b879507028eed141ad Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/2846 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14turtelizer2-revC: Tested with real hardware.Uwe Bonnes
Also some hints around deprecated tcl/interface/turtelizer2.cfg added. Change-Id: Ifa57b49febffaeddd5d8ff0a48833d3544927b10 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2584 Tested-by: jenkins Reviewed-by: Harald Kipp Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl/interface/parport: default to sane value on non-windows systemsPaul Fertser
When using ppdev driver 0 is the most appropriate default value as it corresponds to /dev/parport0. Raw port address is suitable only for direct access (I think that's parport-giveio on windows). Reported by danitool on IRC. Change-Id: I983c22251de6601b433ad31aaf660fb664cee7e9 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2572 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-09tcl/interface/ftdi/xdsv2: fix and clarify EMU* signalsMatthijs van Duin
The signal names are changed for consistency with TI's docs and sources. Change-Id: Ic5c5314daa20f6f610be8a848399f951d47aa137 Signed-off-by: Matthijs van Duin <matthijs@rinnic-vaude.nl> Reviewed-on: http://openocd.zylin.com/2231 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPadPaul Fertser
Change-Id: I4396ee737c1dad380aa23894bbd1faf75f26d072 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2465 Tested-by: jenkins
2015-02-11tcl/interface/ftdi: correct LED config for BusBlaster KT-LinkAnton Kuzmin
Configure the LED to be off by default, blink on activity. Change-Id: I8515ee66c49bddf866268b85811be15c2dbc086c Signed-off-by: Anton Kuzmin <anton.kuzmin@cs.fau.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2539 Tested-by: jenkins
2015-02-11J-Link serial number config optionJoerg Fischer
Add serial option to jlink config commands, handy when there is more than one adapter connected. To select adapter 0123456 for OpenOCD, use jlink serial 0123456 Change-Id: Ib29ce3f0c4975e1169211721a4531bf4db61f1ee Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/2521 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-01-15tcl/interface/ftdi: add config for the IoT-LAB adapterPaul Fertser
This is an integrated adapter used on the IoT-LAB boards. Schematics are available from https://github.com/iot-lab/iot-lab/wiki/Docs/openm3-schematics.pdf Change-Id: I1c80e72653c3f319bb04d01e3dfddb1c2447c398 Tested-by: Quentin Lampin <quentin.lampin@orange.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2415 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-02tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic diagramPaul Fertser
Change-Id: I8600ee983de85e4225430ae508a50cd938122d89 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2357 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-16cmsis-dap: add serial number supportSpencer Oliver
Change-Id: I66926d1013e2b3a43ce0d18d3599771428706b6a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2329 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-06interface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control definitionPaul Fertser
According to my inspection of an Olimex ARM-USB-OCD-H adapter ACBUS0 is connected directly to an SN74LVC2T45 buffer input B2, and the corresponding output A2 is connected directly to the JTAG connector. It seems the information in the Olimex flyer is incorrect for the -H version and TRST can't be tri-stated, ACBUS2 is unused. The older ARM-USB-OCD device has SN74AC244 for an output buffer and ACBUS2 controls its !2OE, ACBUS0 connected to 2A1 (2Y1 is nTRST), in accordance with the information flyer. Change-Id: I22828b7b959b6f62c3f51367feb8fab9705641e5 Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2286 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Tim Sander <tim@krieglstein.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-08-14 10:45:28 +0000