diff options
Diffstat (limited to 'include/media')
106 files changed, 6761 insertions, 1561 deletions
diff --git a/include/media/ad9389b.h b/include/media/ad9389b.h new file mode 100644 index 00000000000..5ba9af869b8 --- /dev/null +++ b/include/media/ad9389b.h @@ -0,0 +1,49 @@ +/* + * Analog Devices AD9389B/AD9889B video encoder driver header + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef AD9389B_H +#define AD9389B_H + +enum ad9389b_tmds_pll_gear { + AD9389B_TMDS_PLL_GEAR_AUTOMATIC, + AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC, +}; + +/* Platform dependent definitions */ +struct ad9389b_platform_data { + enum ad9389b_tmds_pll_gear tmds_pll_gear ; + /* Differential Data/Clock Output Drive Strength (reg. 0xa2/0xa3) */ + u8 diff_data_drive_strength; + u8 diff_clk_drive_strength; +}; + +/* notify events */ +#define AD9389B_MONITOR_DETECT 0 +#define AD9389B_EDID_DETECT 1 + +struct ad9389b_monitor_detect { + int present; +}; + +struct ad9389b_edid_detect { + int present; + int segment; +}; + +#endif diff --git a/include/media/adp1653.h b/include/media/adp1653.h new file mode 100644 index 00000000000..1d9b48a3bd8 --- /dev/null +++ b/include/media/adp1653.h @@ -0,0 +1,126 @@ +/* + * include/media/adp1653.h + * + * Copyright (C) 2008--2011 Nokia Corporation + * + * Contact: Sakari Ailus <sakari.ailus@iki.fi> + * + * Contributors: + * Sakari Ailus <sakari.ailus@iki.fi> + * Tuukka Toivonen <tuukkat76@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef ADP1653_H +#define ADP1653_H + +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#define ADP1653_NAME "adp1653" +#define ADP1653_I2C_ADDR (0x60 >> 1) + +/* Register definitions */ +#define ADP1653_REG_OUT_SEL 0x00 +#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN 0x01 +#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX 0x0b +#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN 0x0c +#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX 0x1f +#define ADP1653_REG_OUT_SEL_HPLED_SHIFT 3 +#define ADP1653_REG_OUT_SEL_ILED_MAX 0x07 +#define ADP1653_REG_OUT_SEL_ILED_SHIFT 0 + +#define ADP1653_REG_CONFIG 0x01 +#define ADP1653_REG_CONFIG_TMR_CFG (1 << 4) +#define ADP1653_REG_CONFIG_TMR_SET_MAX 0x0f +#define ADP1653_REG_CONFIG_TMR_SET_SHIFT 0 + +#define ADP1653_REG_SW_STROBE 0x02 +#define ADP1653_REG_SW_STROBE_SW_STROBE (1 << 0) + +#define ADP1653_REG_FAULT 0x03 +#define ADP1653_REG_FAULT_FLT_SCP (1 << 3) +#define ADP1653_REG_FAULT_FLT_OT (1 << 2) +#define ADP1653_REG_FAULT_FLT_TMR (1 << 1) +#define ADP1653_REG_FAULT_FLT_OV (1 << 0) + +#define ADP1653_INDICATOR_INTENSITY_MIN 0 +#define ADP1653_INDICATOR_INTENSITY_STEP 2500 +#define ADP1653_INDICATOR_INTENSITY_MAX \ + (ADP1653_REG_OUT_SEL_ILED_MAX * ADP1653_INDICATOR_INTENSITY_STEP) +#define ADP1653_INDICATOR_INTENSITY_uA_TO_REG(a) \ + ((a) / ADP1653_INDICATOR_INTENSITY_STEP) +#define ADP1653_INDICATOR_INTENSITY_REG_TO_uA(a) \ + ((a) * ADP1653_INDICATOR_INTENSITY_STEP) + +#define ADP1653_FLASH_INTENSITY_BASE 35 +#define ADP1653_FLASH_INTENSITY_STEP 15 +#define ADP1653_FLASH_INTENSITY_MIN \ + (ADP1653_FLASH_INTENSITY_BASE \ + + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN * ADP1653_FLASH_INTENSITY_STEP) +#define ADP1653_FLASH_INTENSITY_MAX \ + (ADP1653_FLASH_INTENSITY_MIN + \ + (ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX - \ + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN + 1) * \ + ADP1653_FLASH_INTENSITY_STEP) + +#define ADP1653_FLASH_INTENSITY_mA_TO_REG(a) \ + ((a) < ADP1653_FLASH_INTENSITY_BASE ? 0 : \ + (((a) - ADP1653_FLASH_INTENSITY_BASE) / ADP1653_FLASH_INTENSITY_STEP)) +#define ADP1653_FLASH_INTENSITY_REG_TO_mA(a) \ + ((a) * ADP1653_FLASH_INTENSITY_STEP + ADP1653_FLASH_INTENSITY_BASE) + +#define ADP1653_TORCH_INTENSITY_MIN \ + (ADP1653_FLASH_INTENSITY_BASE \ + + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN * ADP1653_FLASH_INTENSITY_STEP) +#define ADP1653_TORCH_INTENSITY_MAX \ + (ADP1653_TORCH_INTENSITY_MIN + \ + (ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX - \ + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN + 1) * \ + ADP1653_FLASH_INTENSITY_STEP) + +struct adp1653_platform_data { + int (*power)(struct v4l2_subdev *sd, int on); + + u32 max_flash_timeout; /* flash light timeout in us */ + u32 max_flash_intensity; /* led intensity, flash mode */ + u32 max_torch_intensity; /* led intensity, torch mode */ + u32 max_indicator_intensity; /* indicator led intensity */ +}; + +#define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev) + +struct adp1653_flash { + struct v4l2_subdev subdev; + struct adp1653_platform_data *platform_data; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *led_mode; + struct v4l2_ctrl *flash_timeout; + struct v4l2_ctrl *flash_intensity; + struct v4l2_ctrl *torch_intensity; + struct v4l2_ctrl *indicator_intensity; + + struct mutex power_lock; + int power_count; + int fault; +}; + +#endif /* ADP1653_H */ diff --git a/include/media/adv7183.h b/include/media/adv7183.h new file mode 100644 index 00000000000..c5c2d377c0a --- /dev/null +++ b/include/media/adv7183.h @@ -0,0 +1,47 @@ +/* + * adv7183.h - definition for adv7183 inputs and outputs + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ADV7183_H_ +#define _ADV7183_H_ + +/* ADV7183 HW inputs */ +#define ADV7183_COMPOSITE0 0 /* CVBS in on AIN1 */ +#define ADV7183_COMPOSITE1 1 /* CVBS in on AIN2 */ +#define ADV7183_COMPOSITE2 2 /* CVBS in on AIN3 */ +#define ADV7183_COMPOSITE3 3 /* CVBS in on AIN4 */ +#define ADV7183_COMPOSITE4 4 /* CVBS in on AIN5 */ +#define ADV7183_COMPOSITE5 5 /* CVBS in on AIN6 */ +#define ADV7183_COMPOSITE6 6 /* CVBS in on AIN7 */ +#define ADV7183_COMPOSITE7 7 /* CVBS in on AIN8 */ +#define ADV7183_COMPOSITE8 8 /* CVBS in on AIN9 */ +#define ADV7183_COMPOSITE9 9 /* CVBS in on AIN10 */ +#define ADV7183_COMPOSITE10 10 /* CVBS in on AIN11 */ + +#define ADV7183_SVIDEO0 11 /* Y on AIN1, C on AIN4 */ +#define ADV7183_SVIDEO1 12 /* Y on AIN2, C on AIN5 */ +#define ADV7183_SVIDEO2 13 /* Y on AIN3, C on AIN6 */ + +#define ADV7183_COMPONENT0 14 /* Y on AIN1, Pr on AIN4, Pb on AIN5 */ +#define ADV7183_COMPONENT1 15 /* Y on AIN2, Pr on AIN3, Pb on AIN6 */ + +/* ADV7183 HW outputs */ +#define ADV7183_8BIT_OUT 0 +#define ADV7183_16BIT_OUT 1 + +#endif diff --git a/include/media/adv7343.h b/include/media/adv7343.h index d6f8a4e1a1f..e4142b1ef8c 100644 --- a/include/media/adv7343.h +++ b/include/media/adv7343.h @@ -20,4 +20,44 @@ #define ADV7343_COMPONENT_ID (1) #define ADV7343_SVIDEO_ID (2) +/** + * adv7343_power_mode - power mode configuration. + * @sleep_mode: on enable the current consumption is reduced to micro ampere + * level. All DACs and the internal PLL circuit are disabled. + * Registers can be read from and written in sleep mode. + * @pll_control: PLL and oversampling control. This control allows internal + * PLL 1 circuit to be powered down and the oversampling to be + * switched off. + * @dac: array to configure power on/off DAC's 1..6 + * + * Power mode register (Register 0x0), for more info refer REGISTER MAP ACCESS + * section of datasheet[1], table 17 page no 30. + * + * [1] http://www.analog.com/static/imported-files/data_sheets/ADV7342_7343.pdf + */ +struct adv7343_power_mode { + bool sleep_mode; + bool pll_control; + u32 dac[6]; +}; + +/** + * struct adv7343_sd_config - SD Only Output Configuration. + * @sd_dac_out: array configuring SD DAC Outputs 1 and 2 + */ +struct adv7343_sd_config { + /* SD only Output Configuration */ + u32 sd_dac_out[2]; +}; + +/** + * struct adv7343_platform_data - Platform data values and access functions. + * @mode_config: Configuration for power mode. + * @sd_config: SD Only Configuration. + */ +struct adv7343_platform_data { + struct adv7343_power_mode mode_config; + struct adv7343_sd_config sd_config; +}; + #endif /* End of #ifndef ADV7343_H */ diff --git a/include/media/adv7393.h b/include/media/adv7393.h new file mode 100644 index 00000000000..b28edf35184 --- /dev/null +++ b/include/media/adv7393.h @@ -0,0 +1,28 @@ +/* + * ADV7393 header file + * + * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/ + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on ADV7343 driver, + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ADV7393_H +#define ADV7393_H + +#define ADV7393_COMPOSITE_ID (0) +#define ADV7393_COMPONENT_ID (1) +#define ADV7393_SVIDEO_ID (2) + +#endif /* End of #ifndef ADV7393_H */ diff --git a/include/media/adv7511.h b/include/media/adv7511.h new file mode 100644 index 00000000000..bb78bed9a5b --- /dev/null +++ b/include/media/adv7511.h @@ -0,0 +1,48 @@ +/* + * Analog Devices ADV7511 HDMI Transmitter Device Driver + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef ADV7511_H +#define ADV7511_H + +/* notify events */ +#define ADV7511_MONITOR_DETECT 0 +#define ADV7511_EDID_DETECT 1 + + +struct adv7511_monitor_detect { + int present; +}; + +struct adv7511_edid_detect { + int present; + int segment; +}; + +struct adv7511_cec_arg { + void *arg; + u32 f_flags; +}; + +struct adv7511_platform_data { + uint8_t i2c_edid; + uint8_t i2c_cec; + uint32_t cec_clk; +}; + +#endif diff --git a/include/media/adv7604.h b/include/media/adv7604.h new file mode 100644 index 00000000000..aa1c4477722 --- /dev/null +++ b/include/media/adv7604.h @@ -0,0 +1,172 @@ +/* + * adv7604 - Analog Devices ADV7604 video decoder driver + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef _ADV7604_ +#define _ADV7604_ + +#include <linux/types.h> + +/* Analog input muxing modes (AFE register 0x02, [2:0]) */ +enum adv7604_ain_sel { + ADV7604_AIN1_2_3_NC_SYNC_1_2 = 0, + ADV7604_AIN4_5_6_NC_SYNC_2_1 = 1, + ADV7604_AIN7_8_9_NC_SYNC_3_1 = 2, + ADV7604_AIN10_11_12_NC_SYNC_4_1 = 3, + ADV7604_AIN9_4_5_6_SYNC_2_1 = 4, +}; + +/* + * Bus rotation and reordering. This is used to specify component reordering on + * the board and describes the components order on the bus when the ADV7604 + * outputs RGB. + */ +enum adv7604_bus_order { + ADV7604_BUS_ORDER_RGB, /* No operation */ + ADV7604_BUS_ORDER_GRB, /* Swap 1-2 */ + ADV7604_BUS_ORDER_RBG, /* Swap 2-3 */ + ADV7604_BUS_ORDER_BGR, /* Swap 1-3 */ + ADV7604_BUS_ORDER_BRG, /* Rotate right */ + ADV7604_BUS_ORDER_GBR, /* Rotate left */ +}; + +/* Input Color Space (IO register 0x02, [7:4]) */ +enum adv7604_inp_color_space { + ADV7604_INP_COLOR_SPACE_LIM_RGB = 0, + ADV7604_INP_COLOR_SPACE_FULL_RGB = 1, + ADV7604_INP_COLOR_SPACE_LIM_YCbCr_601 = 2, + ADV7604_INP_COLOR_SPACE_LIM_YCbCr_709 = 3, + ADV7604_INP_COLOR_SPACE_XVYCC_601 = 4, + ADV7604_INP_COLOR_SPACE_XVYCC_709 = 5, + ADV7604_INP_COLOR_SPACE_FULL_YCbCr_601 = 6, + ADV7604_INP_COLOR_SPACE_FULL_YCbCr_709 = 7, + ADV7604_INP_COLOR_SPACE_AUTO = 0xf, +}; + +/* Select output format (IO register 0x03, [4:2]) */ +enum adv7604_op_format_mode_sel { + ADV7604_OP_FORMAT_MODE0 = 0x00, + ADV7604_OP_FORMAT_MODE1 = 0x04, + ADV7604_OP_FORMAT_MODE2 = 0x08, +}; + +enum adv7604_drive_strength { + ADV7604_DR_STR_MEDIUM_LOW = 1, + ADV7604_DR_STR_MEDIUM_HIGH = 2, + ADV7604_DR_STR_HIGH = 3, +}; + +enum adv7604_int1_config { + ADV7604_INT1_CONFIG_OPEN_DRAIN, + ADV7604_INT1_CONFIG_ACTIVE_LOW, + ADV7604_INT1_CONFIG_ACTIVE_HIGH, + ADV7604_INT1_CONFIG_DISABLED, +}; + +enum adv7604_page { + ADV7604_PAGE_IO, + ADV7604_PAGE_AVLINK, + ADV7604_PAGE_CEC, + ADV7604_PAGE_INFOFRAME, + ADV7604_PAGE_ESDP, + ADV7604_PAGE_DPP, + ADV7604_PAGE_AFE, + ADV7604_PAGE_REP, + ADV7604_PAGE_EDID, + ADV7604_PAGE_HDMI, + ADV7604_PAGE_TEST, + ADV7604_PAGE_CP, + ADV7604_PAGE_VDP, + ADV7604_PAGE_MAX, +}; + +/* Platform dependent definition */ +struct adv7604_platform_data { + /* DIS_PWRDNB: 1 if the PWRDNB pin is unused and unconnected */ + unsigned disable_pwrdnb:1; + + /* DIS_CABLE_DET_RST: 1 if the 5V pins are unused and unconnected */ + unsigned disable_cable_det_rst:1; + + int default_input; + + /* Analog input muxing mode */ + enum adv7604_ain_sel ain_sel; + + /* Bus rotation and reordering */ + enum adv7604_bus_order bus_order; + + /* Select output format mode */ + enum adv7604_op_format_mode_sel op_format_mode_sel; + + /* Configuration of the INT1 pin */ + enum adv7604_int1_config int1_config; + + /* IO register 0x02 */ + unsigned alt_gamma:1; + unsigned op_656_range:1; + unsigned alt_data_sat:1; + + /* IO register 0x05 */ + unsigned blank_data:1; + unsigned insert_av_codes:1; + unsigned replicate_av_codes:1; + + /* IO register 0x06 */ + unsigned inv_vs_pol:1; + unsigned inv_hs_pol:1; + unsigned inv_llc_pol:1; + + /* IO register 0x14 */ + enum adv7604_drive_strength dr_str_data; + enum adv7604_drive_strength dr_str_clk; + enum adv7604_drive_strength dr_str_sync; + + /* IO register 0x30 */ + unsigned output_bus_lsb_to_msb:1; + + /* Free run */ + unsigned hdmi_free_run_mode; + + /* i2c addresses: 0 == use default */ + u8 i2c_addresses[ADV7604_PAGE_MAX]; +}; + +enum adv7604_pad { + ADV7604_PAD_HDMI_PORT_A = 0, + ADV7604_PAD_HDMI_PORT_B = 1, + ADV7604_PAD_HDMI_PORT_C = 2, + ADV7604_PAD_HDMI_PORT_D = 3, + ADV7604_PAD_VGA_RGB = 4, + ADV7604_PAD_VGA_COMP = 5, + /* The source pad is either 1 (ADV7611) or 6 (ADV7604) */ + ADV7604_PAD_SOURCE = 6, + ADV7611_PAD_SOURCE = 1, + ADV7604_PAD_MAX = 7, +}; + +#define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE (V4L2_CID_DV_CLASS_BASE + 0x1000) +#define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL (V4L2_CID_DV_CLASS_BASE + 0x1001) +#define V4L2_CID_ADV_RX_FREE_RUN_COLOR (V4L2_CID_DV_CLASS_BASE + 0x1002) + +/* notify events */ +#define ADV7604_HOTPLUG 1 +#define ADV7604_FMT_CHANGE 2 + +#endif diff --git a/include/media/adv7842.h b/include/media/adv7842.h new file mode 100644 index 00000000000..924cbb8d004 --- /dev/null +++ b/include/media/adv7842.h @@ -0,0 +1,260 @@ +/* + * adv7842 - Analog Devices ADV7842 video decoder driver + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef _ADV7842_ +#define _ADV7842_ + +/* Analog input muxing modes (AFE register 0x02, [2:0]) */ +enum adv7842_ain_sel { + ADV7842_AIN1_2_3_NC_SYNC_1_2 = 0, + ADV7842_AIN4_5_6_NC_SYNC_2_1 = 1, + ADV7842_AIN7_8_9_NC_SYNC_3_1 = 2, + ADV7842_AIN10_11_12_NC_SYNC_4_1 = 3, + ADV7842_AIN9_4_5_6_SYNC_2_1 = 4, +}; + +/* Bus rotation and reordering (IO register 0x04, [7:5]) */ +enum adv7842_op_ch_sel { + ADV7842_OP_CH_SEL_GBR = 0, + ADV7842_OP_CH_SEL_GRB = 1, + ADV7842_OP_CH_SEL_BGR = 2, + ADV7842_OP_CH_SEL_RGB = 3, + ADV7842_OP_CH_SEL_BRG = 4, + ADV7842_OP_CH_SEL_RBG = 5, +}; + +/* Mode of operation */ +enum adv7842_mode { + ADV7842_MODE_SDP, + ADV7842_MODE_COMP, + ADV7842_MODE_RGB, + ADV7842_MODE_HDMI +}; + +/* Video standard select (IO register 0x00, [5:0]) */ +enum adv7842_vid_std_select { + /* SDP */ + ADV7842_SDP_VID_STD_CVBS_SD_4x1 = 0x01, + ADV7842_SDP_VID_STD_YC_SD4_x1 = 0x09, + /* RGB */ + ADV7842_RGB_VID_STD_AUTO_GRAPH_MODE = 0x07, + /* HDMI GR */ + ADV7842_HDMI_GR_VID_STD_AUTO_GRAPH_MODE = 0x02, + /* HDMI COMP */ + ADV7842_HDMI_COMP_VID_STD_HD_1250P = 0x1e, +}; + +/* Input Color Space (IO register 0x02, [7:4]) */ +enum adv7842_inp_color_space { + ADV7842_INP_COLOR_SPACE_LIM_RGB = 0, + ADV7842_INP_COLOR_SPACE_FULL_RGB = 1, + ADV7842_INP_COLOR_SPACE_LIM_YCbCr_601 = 2, + ADV7842_INP_COLOR_SPACE_LIM_YCbCr_709 = 3, + ADV7842_INP_COLOR_SPACE_XVYCC_601 = 4, + ADV7842_INP_COLOR_SPACE_XVYCC_709 = 5, + ADV7842_INP_COLOR_SPACE_FULL_YCbCr_601 = 6, + ADV7842_INP_COLOR_SPACE_FULL_YCbCr_709 = 7, + ADV7842_INP_COLOR_SPACE_AUTO = 0xf, +}; + +/* Select output format (IO register 0x03, [7:0]) */ +enum adv7842_op_format_sel { + ADV7842_OP_FORMAT_SEL_SDR_ITU656_8 = 0x00, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_10 = 0x01, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_12_MODE0 = 0x02, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_12_MODE1 = 0x06, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_12_MODE2 = 0x0a, + ADV7842_OP_FORMAT_SEL_DDR_422_8 = 0x20, + ADV7842_OP_FORMAT_SEL_DDR_422_10 = 0x21, + ADV7842_OP_FORMAT_SEL_DDR_422_12_MODE0 = 0x22, + ADV7842_OP_FORMAT_SEL_DDR_422_12_MODE1 = 0x23, + ADV7842_OP_FORMAT_SEL_DDR_422_12_MODE2 = 0x24, + ADV7842_OP_FORMAT_SEL_SDR_444_24 = 0x40, + ADV7842_OP_FORMAT_SEL_SDR_444_30 = 0x41, + ADV7842_OP_FORMAT_SEL_SDR_444_36_MODE0 = 0x42, + ADV7842_OP_FORMAT_SEL_DDR_444_24 = 0x60, + ADV7842_OP_FORMAT_SEL_DDR_444_30 = 0x61, + ADV7842_OP_FORMAT_SEL_DDR_444_36 = 0x62, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_16 = 0x80, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_20 = 0x81, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_24_MODE0 = 0x82, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_24_MODE1 = 0x86, + ADV7842_OP_FORMAT_SEL_SDR_ITU656_24_MODE2 = 0x8a, +}; + +enum adv7842_select_input { + ADV7842_SELECT_HDMI_PORT_A, + ADV7842_SELECT_HDMI_PORT_B, + ADV7842_SELECT_VGA_RGB, + ADV7842_SELECT_VGA_COMP, + ADV7842_SELECT_SDP_CVBS, + ADV7842_SELECT_SDP_YC, +}; + +enum adv7842_drive_strength { + ADV7842_DR_STR_LOW = 0, + ADV7842_DR_STR_MEDIUM_LOW = 1, + ADV7842_DR_STR_MEDIUM_HIGH = 2, + ADV7842_DR_STR_HIGH = 3, +}; + +struct adv7842_sdp_csc_coeff { + bool manual; + uint16_t scaling; + uint16_t A1; + uint16_t A2; + uint16_t A3; + uint16_t A4; + uint16_t B1; + uint16_t B2; + uint16_t B3; + uint16_t B4; + uint16_t C1; + uint16_t C2; + uint16_t C3; + uint16_t C4; +}; + +struct adv7842_sdp_io_sync_adjustment { + bool adjust; + uint16_t hs_beg; + uint16_t hs_width; + uint16_t de_beg; + uint16_t de_end; + uint8_t vs_beg_o; + uint8_t vs_beg_e; + uint8_t vs_end_o; + uint8_t vs_end_e; + uint8_t de_v_beg_o; + uint8_t de_v_beg_e; + uint8_t de_v_end_o; + uint8_t de_v_end_e; +}; + +/* Platform dependent definition */ +struct adv7842_platform_data { + /* chip reset during probe */ + unsigned chip_reset:1; + + /* DIS_PWRDNB: 1 if the PWRDNB pin is unused and unconnected */ + unsigned disable_pwrdnb:1; + + /* DIS_CABLE_DET_RST: 1 if the 5V pins are unused and unconnected */ + unsigned disable_cable_det_rst:1; + + /* Analog input muxing mode */ + enum adv7842_ain_sel ain_sel; + + /* Bus rotation and reordering */ + enum adv7842_op_ch_sel op_ch_sel; + + /* Default mode */ + enum adv7842_mode mode; + + /* Default input */ + unsigned input; + + /* Video standard */ + enum adv7842_vid_std_select vid_std_select; + + /* Select output format */ + enum adv7842_op_format_sel op_format_sel; + + /* IO register 0x02 */ + unsigned alt_gamma:1; + unsigned op_656_range:1; + unsigned rgb_out:1; + unsigned alt_data_sat:1; + + /* IO register 0x05 */ + unsigned blank_data:1; + unsigned insert_av_codes:1; + unsigned replicate_av_codes:1; + unsigned invert_cbcr:1; + + /* IO register 0x30 */ + unsigned output_bus_lsb_to_msb:1; + + /* IO register 0x14 */ + enum adv7842_drive_strength dr_str_data; + enum adv7842_drive_strength dr_str_clk; + enum adv7842_drive_strength dr_str_sync; + + /* + * IO register 0x19: Adjustment to the LLC DLL phase in + * increments of 1/32 of a clock period. + */ + unsigned llc_dll_phase:5; + + /* External RAM for 3-D comb or frame synchronizer */ + unsigned sd_ram_size; /* ram size in MB */ + unsigned sd_ram_ddr:1; /* ddr or sdr sdram */ + + /* HDMI free run, CP-reg 0xBA */ + unsigned hdmi_free_run_enable:1; + /* 0 = Mode 0: run when there is no TMDS clock + 1 = Mode 1: run when there is no TMDS clock or the + video resolution does not match programmed one. */ + unsigned hdmi_free_run_mode:1; + + /* SDP free run, CP-reg 0xDD */ + unsigned sdp_free_run_auto:1; + unsigned sdp_free_run_man_col_en:1; + unsigned sdp_free_run_cbar_en:1; + unsigned sdp_free_run_force:1; + + /* HPA manual (0) or auto (1), affects HDMI register 0x69 */ + unsigned hpa_auto:1; + + struct adv7842_sdp_csc_coeff sdp_csc_coeff; + + struct adv7842_sdp_io_sync_adjustment sdp_io_sync_625; + struct adv7842_sdp_io_sync_adjustment sdp_io_sync_525; + + /* i2c addresses */ + u8 i2c_sdp_io; + u8 i2c_sdp; + u8 i2c_cp; + u8 i2c_vdp; + u8 i2c_afe; + u8 i2c_hdmi; + u8 i2c_repeater; + u8 i2c_edid; + u8 i2c_infoframe; + u8 i2c_cec; + u8 i2c_avlink; +}; + +#define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE (V4L2_CID_DV_CLASS_BASE + 0x1000) +#define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL (V4L2_CID_DV_CLASS_BASE + 0x1001) +#define V4L2_CID_ADV_RX_FREE_RUN_COLOR (V4L2_CID_DV_CLASS_BASE + 0x1002) + +/* notify events */ +#define ADV7842_FMT_CHANGE 1 + +/* custom ioctl, used to test the external RAM that's used by the + * deinterlacer. */ +#define ADV7842_CMD_RAM_TEST _IO('V', BASE_VIDIOC_PRIVATE) + +#define ADV7842_EDID_PORT_A 0 +#define ADV7842_EDID_PORT_B 1 +#define ADV7842_EDID_PORT_VGA 2 + +#endif diff --git a/include/media/as3645a.h b/include/media/as3645a.h new file mode 100644 index 00000000000..5075496d2c9 --- /dev/null +++ b/include/media/as3645a.h @@ -0,0 +1,71 @@ +/* + * include/media/as3645a.h + * + * Copyright (C) 2008-2011 Nokia Corporation + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __AS3645A_H__ +#define __AS3645A_H__ + +#include <media/v4l2-subdev.h> + +#define AS3645A_NAME "as3645a" +#define AS3645A_I2C_ADDR (0x60 >> 1) /* W:0x60, R:0x61 */ + +#define AS3645A_FLASH_TIMEOUT_MIN 100000 /* us */ +#define AS3645A_FLASH_TIMEOUT_MAX 850000 +#define AS3645A_FLASH_TIMEOUT_STEP 50000 + +#define AS3645A_FLASH_INTENSITY_MIN 200 /* mA */ +#define AS3645A_FLASH_INTENSITY_MAX_1LED 500 +#define AS3645A_FLASH_INTENSITY_MAX_2LEDS 400 +#define AS3645A_FLASH_INTENSITY_STEP 20 + +#define AS3645A_TORCH_INTENSITY_MIN 20 /* mA */ +#define AS3645A_TORCH_INTENSITY_MAX 160 +#define AS3645A_TORCH_INTENSITY_STEP 20 + +#define AS3645A_INDICATOR_INTENSITY_MIN 0 /* uA */ +#define AS3645A_INDICATOR_INTENSITY_MAX 10000 +#define AS3645A_INDICATOR_INTENSITY_STEP 2500 + +/* + * as3645a_platform_data - Flash controller platform data + * @set_power: Set power callback + * @vref: VREF offset (0=0V, 1=+0.3V, 2=-0.3V, 3=+0.6V) + * @peak: Inductor peak current limit (0=1.25A, 1=1.5A, 2=1.75A, 3=2.0A) + * @ext_strobe: True if external flash strobe can be used + * @flash_max_current: Max flash current (mA, <= AS3645A_FLASH_INTENSITY_MAX) + * @torch_max_current: Max torch current (mA, >= AS3645A_TORCH_INTENSITY_MAX) + * @timeout_max: Max flash timeout (us, <= AS3645A_FLASH_TIMEOUT_MAX) + */ +struct as3645a_platform_data { + int (*set_power)(struct v4l2_subdev *subdev, int on); + unsigned int vref; + unsigned int peak; + bool ext_strobe; + + /* Flash and torch currents and timeout limits */ + unsigned int flash_max_current; + unsigned int torch_max_current; + unsigned int timeout_max; +}; + +#endif /* __AS3645A_H__ */ diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h new file mode 100644 index 00000000000..2b023471ac8 --- /dev/null +++ b/include/media/atmel-isi.h @@ -0,0 +1,123 @@ +/* + * Register definitions for the Atmel Image Sensor Interface. + * + * Copyright (C) 2011 Atmel Corporation + * Josh Wu, <josh.wu@atmel.com> + * + * Based on previous work by Lars Haring, <lars.haring@atmel.com> + * and Sedji Gaouaou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ATMEL_ISI_H__ +#define __ATMEL_ISI_H__ + +#include <linux/types.h> + +/* ISI_V2 register offsets */ +#define ISI_CFG1 0x0000 +#define ISI_CFG2 0x0004 +#define ISI_PSIZE 0x0008 +#define ISI_PDECF 0x000c +#define ISI_Y2R_SET0 0x0010 +#define ISI_Y2R_SET1 0x0014 +#define ISI_R2Y_SET0 0x0018 +#define ISI_R2Y_SET1 0x001C +#define ISI_R2Y_SET2 0x0020 +#define ISI_CTRL 0x0024 +#define ISI_STATUS 0x0028 +#define ISI_INTEN 0x002C +#define ISI_INTDIS 0x0030 +#define ISI_INTMASK 0x0034 +#define ISI_DMA_CHER 0x0038 +#define ISI_DMA_CHDR 0x003C +#define ISI_DMA_CHSR 0x0040 +#define ISI_DMA_P_ADDR 0x0044 +#define ISI_DMA_P_CTRL 0x0048 +#define ISI_DMA_P_DSCR 0x004C +#define ISI_DMA_C_ADDR 0x0050 +#define ISI_DMA_C_CTRL 0x0054 +#define ISI_DMA_C_DSCR 0x0058 + +/* Bitfields in CFG1 */ +#define ISI_CFG1_HSYNC_POL_ACTIVE_LOW (1 << 2) +#define ISI_CFG1_VSYNC_POL_ACTIVE_LOW (1 << 3) +#define ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING (1 << 4) +#define ISI_CFG1_EMB_SYNC (1 << 6) +#define ISI_CFG1_CRC_SYNC (1 << 7) +/* Constants for FRATE(ISI_V2) */ +#define ISI_CFG1_FRATE_CAPTURE_ALL (0 << 8) +#define ISI_CFG1_FRATE_DIV_2 (1 << 8) +#define ISI_CFG1_FRATE_DIV_3 (2 << 8) +#define ISI_CFG1_FRATE_DIV_4 (3 << 8) +#define ISI_CFG1_FRATE_DIV_5 (4 << 8) +#define ISI_CFG1_FRATE_DIV_6 (5 << 8) +#define ISI_CFG1_FRATE_DIV_7 (6 << 8) +#define ISI_CFG1_FRATE_DIV_8 (7 << 8) +#define ISI_CFG1_FRATE_DIV_MASK (7 << 8) +#define ISI_CFG1_DISCR (1 << 11) +#define ISI_CFG1_FULL_MODE (1 << 12) + +/* Bitfields in CFG2 */ +#define ISI_CFG2_GRAYSCALE (1 << 13) +/* Constants for YCC_SWAP(ISI_V2) */ +#define ISI_CFG2_YCC_SWAP_DEFAULT (0 << 28) +#define ISI_CFG2_YCC_SWAP_MODE_1 (1 << 28) +#define ISI_CFG2_YCC_SWAP_MODE_2 (2 << 28) +#define ISI_CFG2_YCC_SWAP_MODE_3 (3 << 28) +#define ISI_CFG2_YCC_SWAP_MODE_MASK (3 << 28) +#define ISI_CFG2_IM_VSIZE_OFFSET 0 +#define ISI_CFG2_IM_HSIZE_OFFSET 16 +#define ISI_CFG2_IM_VSIZE_MASK (0x7FF << ISI_CFG2_IM_VSIZE_OFFSET) +#define ISI_CFG2_IM_HSIZE_MASK (0x7FF << ISI_CFG2_IM_HSIZE_OFFSET) + +/* Bitfields in CTRL */ +/* Also using in SR(ISI_V2) */ +#define ISI_CTRL_EN (1 << 0) +#define ISI_CTRL_CDC (1 << 8) +/* Also using in SR/IER/IDR/IMR(ISI_V2) */ +#define ISI_CTRL_DIS (1 << 1) +#define ISI_CTRL_SRST (1 << 2) + +/* Bitfields in SR */ +#define ISI_SR_SIP (1 << 19) +/* Also using in SR/IER/IDR/IMR */ +#define ISI_SR_VSYNC (1 << 10) +#define ISI_SR_PXFR_DONE (1 << 16) +#define ISI_SR_CXFR_DONE (1 << 17) +#define ISI_SR_P_OVR (1 << 24) +#define ISI_SR_C_OVR (1 << 25) +#define ISI_SR_CRC_ERR (1 << 26) +#define ISI_SR_FR_OVR (1 << 27) + +/* Bitfields in DMA_C_CTRL & in DMA_P_CTRL */ +#define ISI_DMA_CTRL_FETCH (1 << 0) +#define ISI_DMA_CTRL_WB (1 << 1) +#define ISI_DMA_CTRL_IEN (1 << 2) +#define ISI_DMA_CTRL_DONE (1 << 3) + +/* Bitfields in DMA_CHSR/CHER/CHDR */ +#define ISI_DMA_CHSR_P_CH (1 << 0) +#define ISI_DMA_CHSR_C_CH (1 << 1) + +/* Definition for isi_platform_data */ +#define ISI_DATAWIDTH_8 0x01 +#define ISI_DATAWIDTH_10 0x02 + +struct isi_platform_data { + u8 has_emb_sync; + u8 emb_crc_sync; + u8 hsync_act_low; + u8 vsync_act_low; + u8 pclk_act_falling; + u8 full_mode; + u32 data_width_flags; + /* Using for ISI_CFG1 */ + u32 frate; + /* Using for ISI_MCK */ + u32 mck_hz; +}; + +#endif /* __ATMEL_ISI_H__ */ diff --git a/include/media/blackfin/bfin_capture.h b/include/media/blackfin/bfin_capture.h new file mode 100644 index 00000000000..56b9ce4472f --- /dev/null +++ b/include/media/blackfin/bfin_capture.h @@ -0,0 +1,38 @@ +#ifndef _BFIN_CAPTURE_H_ +#define _BFIN_CAPTURE_H_ + +#include <linux/i2c.h> + +struct v4l2_input; +struct ppi_info; + +struct bcap_route { + u32 input; + u32 output; + u32 ppi_control; +}; + +struct bfin_capture_config { + /* card name */ + char *card_name; + /* inputs available at the sub device */ + struct v4l2_input *inputs; + /* number of inputs supported */ + int num_inputs; + /* routing information for each input */ + struct bcap_route *routes; + /* i2c bus adapter no */ + int i2c_adapter_id; + /* i2c subdevice board info */ + struct i2c_board_info board_info; + /* ppi board info */ + const struct ppi_info *ppi_info; + /* ppi control */ + unsigned long ppi_control; + /* ppi interrupt mask */ + u32 int_mask; + /* horizontal blanking pixels */ + int blank_pixels; +}; + +#endif diff --git a/include/media/blackfin/ppi.h b/include/media/blackfin/ppi.h new file mode 100644 index 00000000000..d0697f4edf8 --- /dev/null +++ b/include/media/blackfin/ppi.h @@ -0,0 +1,96 @@ +/* + * Analog Devices PPI header file + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _PPI_H_ +#define _PPI_H_ + +#include <linux/interrupt.h> +#include <asm/blackfin.h> +#include <asm/bfin_ppi.h> + +/* EPPI */ +#ifdef EPPI_EN +#define PORT_EN EPPI_EN +#define PORT_DIR EPPI_DIR +#define DMA32 0 +#define PACK_EN PACKEN +#endif + +/* EPPI3 */ +#ifdef EPPI0_CTL2 +#define PORT_EN EPPI_CTL_EN +#define PORT_DIR EPPI_CTL_DIR +#define PACK_EN EPPI_CTL_PACKEN +#define DMA32 0 +#define DLEN_8 EPPI_CTL_DLEN08 +#define DLEN_16 EPPI_CTL_DLEN16 +#endif + +struct ppi_if; + +struct ppi_params { + u32 width; /* width in pixels */ + u32 height; /* height in lines */ + u32 hdelay; /* delay after the HSYNC in pixels */ + u32 vdelay; /* delay after the VSYNC in lines */ + u32 line; /* total pixels per line */ + u32 frame; /* total lines per frame */ + u32 hsync; /* HSYNC length in pixels */ + u32 vsync; /* VSYNC length in lines */ + int bpp; /* bits per pixel */ + int dlen; /* data length for ppi in bits */ + u32 ppi_control; /* ppi configuration */ + u32 int_mask; /* interrupt mask */ +}; + +struct ppi_ops { + int (*attach_irq)(struct ppi_if *ppi, irq_handler_t handler); + void (*detach_irq)(struct ppi_if *ppi); + int (*start)(struct ppi_if *ppi); + int (*stop)(struct ppi_if *ppi); + int (*set_params)(struct ppi_if *ppi, struct ppi_params *params); + void (*update_addr)(struct ppi_if *ppi, unsigned long addr); +}; + +enum ppi_type { + PPI_TYPE_PPI, + PPI_TYPE_EPPI, + PPI_TYPE_EPPI3, +}; + +struct ppi_info { + enum ppi_type type; + int dma_ch; + int irq_err; + void __iomem *base; + const unsigned short *pin_req; +}; + +struct ppi_if { + unsigned long ppi_control; + const struct ppi_ops *ops; + const struct ppi_info *info; + bool err_int; /* if we need request error interrupt */ + bool err; /* if ppi has fifo error */ + void *priv; +}; + +struct ppi_if *ppi_create_instance(const struct ppi_info *info); +void ppi_delete_instance(struct ppi_if *ppi); +#endif diff --git a/include/media/cx25840.h b/include/media/cx25840.h index 46d1a141208..783c5bdd63e 100644 --- a/include/media/cx25840.h +++ b/include/media/cx25840.h @@ -85,6 +85,7 @@ enum cx25840_video_input { CX25840_NONE1_CH3 = 0x800000c0, CX25840_SVIDEO_ON = 0x80000100, CX25840_COMPONENT_ON = 0x80000200, + CX25840_DIF_ON = 0x80000400, }; enum cx25840_audio_input { diff --git a/include/media/davinci/dm355_ccdc.h b/include/media/davinci/dm355_ccdc.h index df8a7b10747..c669a9fb75e 100644 --- a/include/media/davinci/dm355_ccdc.h +++ b/include/media/davinci/dm355_ccdc.h @@ -38,7 +38,7 @@ enum ccdc_sample_line { CCDC_SAMPLE_16LINES }; -/* enum for Alaw gama width */ +/* enum for Alaw gamma width */ enum ccdc_gamma_width { CCDC_GAMMA_BITS_13_4, CCDC_GAMMA_BITS_12_3, @@ -97,8 +97,8 @@ enum ccdc_mfilt2 { struct ccdc_a_law { /* Enable/disable A-Law */ unsigned char enable; - /* Gama Width Input */ - enum ccdc_gamma_width gama_wd; + /* Gamma Width Input */ + enum ccdc_gamma_width gamma_wd; }; /* structure for Black Clamping */ @@ -193,7 +193,7 @@ struct ccdc_dft_corr_mem_ctl { #define CCDC_DFT_TABLE_SIZE 16 /* * Main Structure for vertical defect correction. Vertical defect - * correction can correct upto 16 defects if defects less than 16 + * correction can correct up to 16 defects if defects less than 16 * then pad the rest with 0 */ struct ccdc_vertical_dft { diff --git a/include/media/davinci/dm644x_ccdc.h b/include/media/davinci/dm644x_ccdc.h index 3e178eb52fb..852e96c4bb4 100644 --- a/include/media/davinci/dm644x_ccdc.h +++ b/include/media/davinci/dm644x_ccdc.h @@ -38,17 +38,23 @@ enum ccdc_sample_line { CCDC_SAMPLE_16LINES }; -/* enum for Alaw gama width */ -enum ccdc_gama_width { - CCDC_GAMMA_BITS_15_6, +/* enum for Alaw gamma width */ +enum ccdc_gamma_width { + CCDC_GAMMA_BITS_15_6, /* use bits 15-6 for gamma */ CCDC_GAMMA_BITS_14_5, CCDC_GAMMA_BITS_13_4, CCDC_GAMMA_BITS_12_3, CCDC_GAMMA_BITS_11_2, CCDC_GAMMA_BITS_10_1, - CCDC_GAMMA_BITS_09_0 + CCDC_GAMMA_BITS_09_0 /* use bits 9-0 for gamma */ }; +/* returns the highest bit used for the gamma */ +static inline u8 ccdc_gamma_width_max_bit(enum ccdc_gamma_width width) +{ + return 15 - width; +} + enum ccdc_data_size { CCDC_DATA_16BITS, CCDC_DATA_15BITS, @@ -60,12 +66,18 @@ enum ccdc_data_size { CCDC_DATA_8BITS }; +/* returns the highest bit used for this data size */ +static inline u8 ccdc_data_size_max_bit(enum ccdc_data_size sz) +{ + return sz == CCDC_DATA_8BITS ? 7 : 15 - sz; +} + /* structure for ALaw */ struct ccdc_a_law { /* Enable/disable A-Law */ unsigned char enable; - /* Gama Width Input */ - enum ccdc_gama_width gama_wd; + /* Gamma Width Input */ + enum ccdc_gamma_width gamma_wd; }; /* structure for Black Clamping */ diff --git a/include/media/davinci/isif.h b/include/media/davinci/isif.h index b0b74ad618c..7f3d76a4b9e 100644 --- a/include/media/davinci/isif.h +++ b/include/media/davinci/isif.h @@ -199,7 +199,7 @@ struct isif_black_clamp { }; /************************************************************************* -** Color Space Convertion (CSC) +** Color Space Conversion (CSC) *************************************************************************/ #define ISIF_CSC_NUM_COEFF 16 struct isif_color_space_conv { diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h new file mode 100644 index 00000000000..57585c7004a --- /dev/null +++ b/include/media/davinci/vpbe.h @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_H +#define _VPBE_H + +#include <linux/videodev2.h> +#include <linux/i2c.h> + +#include <media/v4l2-dev.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_osd.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpbe_types.h> + +/* OSD configuration info */ +struct osd_config_info { + char module_name[32]; +}; + +struct vpbe_output { + struct v4l2_output output; + /* + * If output capabilities include dv_timings, list supported timings + * below + */ + char *subdev_name; + /* + * defualt_mode identifies the default timings set at the venc or + * external encoder. + */ + char *default_mode; + /* + * Fields below are used for supporting multiple modes. For example, + * LCD panel might support different modes and they are listed here. + * Similarly for supporting external encoders, lcd controller port + * requires a set of non-standard timing values to be listed here for + * each supported mode since venc is used in non-standard timing mode + * for interfacing with external encoder similar to configuring lcd + * panel timings + */ + unsigned int num_modes; + struct vpbe_enc_mode_info *modes; + /* + * Bus configuration goes here for external encoders. Some encoders + * may require multiple interface types for each of the output. For + * example, SD modes would use YCC8 where as HD mode would use YCC16. + * Not sure if this is needed on a per mode basis instead of per + * output basis. If per mode is needed, we may have to move this to + * mode_info structure + */ + enum v4l2_mbus_pixelcode if_params; +}; + +/* encoder configuration info */ +struct encoder_config_info { + char module_name[32]; + /* Is this an i2c device ? */ + unsigned int is_i2c:1; + /* i2c subdevice board info */ + struct i2c_board_info board_info; +}; + +/*amplifier configuration info */ +struct amp_config_info { + char module_name[32]; + /* Is this an i2c device ? */ + unsigned int is_i2c:1; + /* i2c subdevice board info */ + struct i2c_board_info board_info; +}; + +/* structure for defining vpbe display subsystem components */ +struct vpbe_config { + char module_name[32]; + /* i2c bus adapter no */ + int i2c_adapter_id; + struct osd_config_info osd; + struct encoder_config_info venc; + /* external encoder information goes here */ + int num_ext_encoders; + struct encoder_config_info *ext_encoders; + /* amplifier information goes here */ + struct amp_config_info *amp; + int num_outputs; + /* Order is venc outputs followed by LCD and then external encoders */ + struct vpbe_output *outputs; +}; + +struct vpbe_device; + +struct vpbe_device_ops { + /* crop cap for the display */ + int (*g_cropcap)(struct vpbe_device *vpbe_dev, + struct v4l2_cropcap *cropcap); + + /* Enumerate the outputs */ + int (*enum_outputs)(struct vpbe_device *vpbe_dev, + struct v4l2_output *output); + + /* Set output to the given index */ + int (*set_output)(struct vpbe_device *vpbe_dev, + int index); + + /* Get current output */ + unsigned int (*get_output)(struct vpbe_device *vpbe_dev); + + /* Set DV preset at current output */ + int (*s_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_timings *dv_timings); + + /* Get DV presets supported at the output */ + int (*g_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_timings *dv_timings); + + /* Enumerate the DV Presets supported at the output */ + int (*enum_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_enum_dv_timings *timings_info); + + /* Set std at the output */ + int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id); + + /* Get the current std at the output */ + int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id); + + /* initialize the device */ + int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev); + + /* De-initialize the device */ + void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev); + + /* Get the current mode info */ + int (*get_mode_info)(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info*); + + /* + * Set the current mode in the encoder. Alternate way of setting + * standard or DV preset or custom timings in the encoder + */ + int (*set_mode)(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info*); + /* Power management operations */ + int (*suspend)(struct vpbe_device *vpbe_dev); + int (*resume)(struct vpbe_device *vpbe_dev); +}; + +/* struct for vpbe device */ +struct vpbe_device { + /* V4l2 device */ + struct v4l2_device v4l2_dev; + /* vpbe dispay controller cfg */ + struct vpbe_config *cfg; + /* parent device */ + struct device *pdev; + /* external encoder v4l2 sub devices */ + struct v4l2_subdev **encoders; + /* current encoder index */ + int current_sd_index; + /* external amplifier v4l2 subdevice */ + struct v4l2_subdev *amp; + struct mutex lock; + /* device initialized */ + int initialized; + /* vpbe dac clock */ + struct clk *dac_clk; + /* osd_device pointer */ + struct osd_state *osd_device; + /* venc device pointer */ + struct venc_platform_data *venc_device; + /* + * fields below are accessed by users of vpbe_device. Not the + * ones above + */ + + /* current output */ + int current_out_index; + /* lock used by caller to do atomic operation on vpbe device */ + /* current timings set in the controller */ + struct vpbe_enc_mode_info current_timings; + /* venc sub device */ + struct v4l2_subdev *venc; + /* device operations below */ + struct vpbe_device_ops ops; +}; + +#endif diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h new file mode 100644 index 00000000000..637749a9143 --- /dev/null +++ b/include/media/davinci/vpbe_display.h @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef VPBE_DISPLAY_H +#define VPBE_DISPLAY_H + +/* Header files */ +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/v4l2-fh.h> +#include <media/videobuf2-dma-contig.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_osd.h> +#include <media/davinci/vpbe.h> + +#define VPBE_DISPLAY_MAX_DEVICES 2 + +enum vpbe_display_device_id { + VPBE_DISPLAY_DEVICE_0, + VPBE_DISPLAY_DEVICE_1 +}; + +#define VPBE_DISPLAY_DRV_NAME "vpbe-display" + +#define VPBE_DISPLAY_MAJOR_RELEASE 1 +#define VPBE_DISPLAY_MINOR_RELEASE 0 +#define VPBE_DISPLAY_BUILD 1 +#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \ + (VPBE_DISPLAY_MINOR_RELEASE << 8) | \ + VPBE_DISPLAY_BUILD) + +#define VPBE_DISPLAY_VALID_FIELD(field) ((V4L2_FIELD_NONE == field) || \ + (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field)) + +/* Exp ratio numerator and denominator constants */ +#define VPBE_DISPLAY_H_EXP_RATIO_N 9 +#define VPBE_DISPLAY_H_EXP_RATIO_D 8 +#define VPBE_DISPLAY_V_EXP_RATIO_N 6 +#define VPBE_DISPLAY_V_EXP_RATIO_D 5 + +/* Zoom multiplication factor */ +#define VPBE_DISPLAY_ZOOM_4X 4 +#define VPBE_DISPLAY_ZOOM_2X 2 + +/* Structures */ +struct display_layer_info { + int enable; + /* Layer ID used by Display Manager */ + enum osd_layer id; + struct osd_layer_config config; + enum osd_zoom_factor h_zoom; + enum osd_zoom_factor v_zoom; + enum osd_h_exp_ratio h_exp; + enum osd_v_exp_ratio v_exp; +}; + +struct vpbe_disp_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +/* vpbe display object structure */ +struct vpbe_layer { + /* number of buffers in fbuffers */ + unsigned int numbuffers; + /* Pointer to the vpbe_display */ + struct vpbe_display *disp_dev; + /* Pointer pointing to current v4l2_buffer */ + struct vpbe_disp_buffer *cur_frm; + /* Pointer pointing to next v4l2_buffer */ + struct vpbe_disp_buffer *next_frm; + /* videobuf specific parameters + * Buffer queue used in video-buf + */ + struct vb2_queue buffer_queue; + /* allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + /* Queue of filled frames */ + struct list_head dma_queue; + /* Used in video-buf */ + spinlock_t irqlock; + /* V4l2 specific parameters */ + /* Identifies video device for this layer */ + struct video_device video_dev; + /* This field keeps track of type of buffer exchange mechanism user + * has selected + */ + enum v4l2_memory memory; + /* Used to store pixel format */ + struct v4l2_pix_format pix_fmt; + enum v4l2_field buf_field; + /* Video layer configuration params */ + struct display_layer_info layer_info; + /* vpbe specific parameters + * enable window for display + */ + unsigned char window_enable; + /* number of open instances of the layer */ + unsigned int usrs; + /* number of users performing IO */ + unsigned int io_usrs; + /* Indicates id of the field which is being displayed */ + unsigned int field_id; + /* Indicates whether streaming started */ + unsigned char started; + /* Identifies device object */ + enum vpbe_display_device_id device_id; + /* facilitation of ioctl ops lock by v4l2*/ + struct mutex opslock; + u8 layer_first_int; +}; + +/* vpbe device structure */ +struct vpbe_display { + /* layer specific parameters */ + /* lock for isr updates to buf layers*/ + spinlock_t dma_queue_lock; + /* C-Plane offset from start of y-plane */ + unsigned int cbcr_ofst; + struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES]; + struct vpbe_device *vpbe_dev; + struct osd_state *osd_device; +}; + +/* File handle structure */ +struct vpbe_fh { + struct v4l2_fh fh; + /* vpbe device structure */ + struct vpbe_display *disp_dev; + /* pointer to layer object for opened device */ + struct vpbe_layer *layer; + /* Indicates whether this file handle is doing IO */ + unsigned char io_allowed; +}; + +struct buf_config_params { + unsigned char min_numbuffers; + unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES]; + unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES]; + unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES]; +}; + +#endif /* VPBE_DISPLAY_H */ diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h new file mode 100644 index 00000000000..de59364d7ed --- /dev/null +++ b/include/media/davinci/vpbe_osd.h @@ -0,0 +1,395 @@ +/* + * Copyright (C) 2007-2009 Texas Instruments Inc + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Andy Lowe (alowe@mvista.com), MontaVista Software + * - Initial version + * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. + * - ported to sub device interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2.. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef _OSD_H +#define _OSD_H + +#include <media/davinci/vpbe_types.h> + +#define DM644X_VPBE_OSD_SUBDEV_NAME "dm644x,vpbe-osd" +#define DM365_VPBE_OSD_SUBDEV_NAME "dm365,vpbe-osd" +#define DM355_VPBE_OSD_SUBDEV_NAME "dm355,vpbe-osd" + +/** + * enum osd_layer + * @WIN_OSD0: On-Screen Display Window 0 + * @WIN_VID0: Video Window 0 + * @WIN_OSD1: On-Screen Display Window 1 + * @WIN_VID1: Video Window 1 + * + * Description: + * An enumeration of the osd display layers. + */ +enum osd_layer { + WIN_OSD0, + WIN_VID0, + WIN_OSD1, + WIN_VID1, +}; + +/** + * enum osd_win_layer + * @OSDWIN_OSD0: On-Screen Display Window 0 + * @OSDWIN_OSD1: On-Screen Display Window 1 + * + * Description: + * An enumeration of the OSD Window layers. + */ +enum osd_win_layer { + OSDWIN_OSD0, + OSDWIN_OSD1, +}; + +/** + * enum osd_pix_format + * @PIXFMT_1BPP: 1-bit-per-pixel bitmap + * @PIXFMT_2BPP: 2-bits-per-pixel bitmap + * @PIXFMT_4BPP: 4-bits-per-pixel bitmap + * @PIXFMT_8BPP: 8-bits-per-pixel bitmap + * @PIXFMT_RGB565: 16-bits-per-pixel RGB565 + * @PIXFMT_YCbCrI: YUV 4:2:2 + * @PIXFMT_RGB888: 24-bits-per-pixel RGB888 + * @PIXFMT_YCrCbI: YUV 4:2:2 with chroma swap + * @PIXFMT_NV12: YUV 4:2:0 planar + * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp) + * + * Description: + * An enumeration of the DaVinci pixel formats. + */ +enum osd_pix_format { + PIXFMT_1BPP = 0, + PIXFMT_2BPP, + PIXFMT_4BPP, + PIXFMT_8BPP, + PIXFMT_RGB565, + PIXFMT_YCBCRI, + PIXFMT_RGB888, + PIXFMT_YCRCBI, + PIXFMT_NV12, + PIXFMT_OSD_ATTR, +}; + +/** + * enum osd_h_exp_ratio + * @H_EXP_OFF: no expansion (1/1) + * @H_EXP_9_OVER_8: 9/8 expansion ratio + * @H_EXP_3_OVER_2: 3/2 expansion ratio + * + * Description: + * An enumeration of the available horizontal expansion ratios. + */ +enum osd_h_exp_ratio { + H_EXP_OFF, + H_EXP_9_OVER_8, + H_EXP_3_OVER_2, +}; + +/** + * enum osd_v_exp_ratio + * @V_EXP_OFF: no expansion (1/1) + * @V_EXP_6_OVER_5: 6/5 expansion ratio + * + * Description: + * An enumeration of the available vertical expansion ratios. + */ +enum osd_v_exp_ratio { + V_EXP_OFF, + V_EXP_6_OVER_5, +}; + +/** + * enum osd_zoom_factor + * @ZOOM_X1: no zoom (x1) + * @ZOOM_X2: x2 zoom + * @ZOOM_X4: x4 zoom + * + * Description: + * An enumeration of the available zoom factors. + */ +enum osd_zoom_factor { + ZOOM_X1, + ZOOM_X2, + ZOOM_X4, +}; + +/** + * enum osd_clut + * @ROM_CLUT: ROM CLUT + * @RAM_CLUT: RAM CLUT + * + * Description: + * An enumeration of the available Color Lookup Tables (CLUTs). + */ +enum osd_clut { + ROM_CLUT, + RAM_CLUT, +}; + +/** + * enum osd_rom_clut + * @ROM_CLUT0: Macintosh CLUT + * @ROM_CLUT1: CLUT from DM270 and prior devices + * + * Description: + * An enumeration of the ROM Color Lookup Table (CLUT) options. + */ +enum osd_rom_clut { + ROM_CLUT0, + ROM_CLUT1, +}; + +/** + * enum osd_blending_factor + * @OSD_0_VID_8: OSD pixels are fully transparent + * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8 + * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8 + * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8 + * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8 + * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8 + * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8 + * @OSD_8_VID_0: OSD pixels are fully opaque + * + * Description: + * An enumeration of the DaVinci pixel blending factor options. + */ +enum osd_blending_factor { + OSD_0_VID_8, + OSD_1_VID_7, + OSD_2_VID_6, + OSD_3_VID_5, + OSD_4_VID_4, + OSD_5_VID_3, + OSD_6_VID_2, + OSD_8_VID_0, +}; + +/** + * enum osd_blink_interval + * @BLINK_X1: blink interval is 1 vertical refresh cycle + * @BLINK_X2: blink interval is 2 vertical refresh cycles + * @BLINK_X3: blink interval is 3 vertical refresh cycles + * @BLINK_X4: blink interval is 4 vertical refresh cycles + * + * Description: + * An enumeration of the DaVinci pixel blinking interval options. + */ +enum osd_blink_interval { + BLINK_X1, + BLINK_X2, + BLINK_X3, + BLINK_X4, +}; + +/** + * enum osd_cursor_h_width + * @H_WIDTH_1: horizontal line width is 1 pixel + * @H_WIDTH_4: horizontal line width is 4 pixels + * @H_WIDTH_8: horizontal line width is 8 pixels + * @H_WIDTH_12: horizontal line width is 12 pixels + * @H_WIDTH_16: horizontal line width is 16 pixels + * @H_WIDTH_20: horizontal line width is 20 pixels + * @H_WIDTH_24: horizontal line width is 24 pixels + * @H_WIDTH_28: horizontal line width is 28 pixels + */ +enum osd_cursor_h_width { + H_WIDTH_1, + H_WIDTH_4, + H_WIDTH_8, + H_WIDTH_12, + H_WIDTH_16, + H_WIDTH_20, + H_WIDTH_24, + H_WIDTH_28, +}; + +/** + * enum davinci_cursor_v_width + * @V_WIDTH_1: vertical line width is 1 line + * @V_WIDTH_2: vertical line width is 2 lines + * @V_WIDTH_4: vertical line width is 4 lines + * @V_WIDTH_6: vertical line width is 6 lines + * @V_WIDTH_8: vertical line width is 8 lines + * @V_WIDTH_10: vertical line width is 10 lines + * @V_WIDTH_12: vertical line width is 12 lines + * @V_WIDTH_14: vertical line width is 14 lines + */ +enum osd_cursor_v_width { + V_WIDTH_1, + V_WIDTH_2, + V_WIDTH_4, + V_WIDTH_6, + V_WIDTH_8, + V_WIDTH_10, + V_WIDTH_12, + V_WIDTH_14, +}; + +/** + * struct osd_cursor_config + * @xsize: horizontal size in pixels + * @ysize: vertical size in lines + * @xpos: horizontal offset in pixels from the left edge of the display + * @ypos: vertical offset in lines from the top of the display + * @interlaced: Non-zero if the display is interlaced, or zero otherwise + * @h_width: horizontal line width + * @v_width: vertical line width + * @clut: the CLUT selector (ROM or RAM) for the cursor color + * @clut_index: an index into the CLUT for the cursor color + * + * Description: + * A structure describing the configuration parameters of the hardware + * rectangular cursor. + */ +struct osd_cursor_config { + unsigned xsize; + unsigned ysize; + unsigned xpos; + unsigned ypos; + int interlaced; + enum osd_cursor_h_width h_width; + enum osd_cursor_v_width v_width; + enum osd_clut clut; + unsigned char clut_index; +}; + +/** + * struct osd_layer_config + * @pixfmt: pixel format + * @line_length: offset in bytes between start of each line in memory + * @xsize: number of horizontal pixels displayed per line + * @ysize: number of lines displayed + * @xpos: horizontal offset in pixels from the left edge of the display + * @ypos: vertical offset in lines from the top of the display + * @interlaced: Non-zero if the display is interlaced, or zero otherwise + * + * Description: + * A structure describing the configuration parameters of an On-Screen Display + * (OSD) or video layer related to how the image is stored in memory. + * @line_length must be a multiple of the cache line size (32 bytes). + */ +struct osd_layer_config { + enum osd_pix_format pixfmt; + unsigned line_length; + unsigned xsize; + unsigned ysize; + unsigned xpos; + unsigned ypos; + int interlaced; +}; + +/* parameters that apply on a per-window (OSD or video) basis */ +struct osd_window_state { + int is_allocated; + int is_enabled; + unsigned long fb_base_phys; + enum osd_zoom_factor h_zoom; + enum osd_zoom_factor v_zoom; + struct osd_layer_config lconfig; +}; + +/* parameters that apply on a per-OSD-window basis */ +struct osd_osdwin_state { + enum osd_clut clut; + enum osd_blending_factor blend; + int colorkey_blending; + unsigned colorkey; + int rec601_attenuation; + /* index is pixel value */ + unsigned char palette_map[16]; +}; + +/* hardware rectangular cursor parameters */ +struct osd_cursor_state { + int is_enabled; + struct osd_cursor_config config; +}; + +struct osd_state; + +struct vpbe_osd_ops { + int (*initialize)(struct osd_state *sd); + int (*request_layer)(struct osd_state *sd, enum osd_layer layer); + void (*release_layer)(struct osd_state *sd, enum osd_layer layer); + int (*enable_layer)(struct osd_state *sd, enum osd_layer layer, + int otherwin); + void (*disable_layer)(struct osd_state *sd, enum osd_layer layer); + int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig); + void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig); + void (*start_layer)(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst); + void (*set_left_margin)(struct osd_state *sd, u32 val); + void (*set_top_margin)(struct osd_state *sd, u32 val); + void (*set_interpolation_filter)(struct osd_state *sd, int filter); + int (*set_vid_expansion)(struct osd_state *sd, + enum osd_h_exp_ratio h_exp, + enum osd_v_exp_ratio v_exp); + void (*get_vid_expansion)(struct osd_state *sd, + enum osd_h_exp_ratio *h_exp, + enum osd_v_exp_ratio *v_exp); + void (*set_zoom)(struct osd_state *sd, enum osd_layer layer, + enum osd_zoom_factor h_zoom, + enum osd_zoom_factor v_zoom); +}; + +struct osd_state { + enum vpbe_version vpbe_type; + spinlock_t lock; + struct device *dev; + dma_addr_t osd_base_phys; + void __iomem *osd_base; + unsigned long osd_size; + /* 1-->the isr will toggle the VID0 ping-pong buffer */ + int pingpong; + int interpolation_filter; + int field_inversion; + enum osd_h_exp_ratio osd_h_exp; + enum osd_v_exp_ratio osd_v_exp; + enum osd_h_exp_ratio vid_h_exp; + enum osd_v_exp_ratio vid_v_exp; + enum osd_clut backg_clut; + unsigned backg_clut_index; + enum osd_rom_clut rom_clut; + int is_blinking; + /* attribute window blinking enabled */ + enum osd_blink_interval blink; + /* YCbCrI or YCrCbI */ + enum osd_pix_format yc_pixfmt; + /* columns are Y, Cb, Cr */ + unsigned char clut_ram[256][3]; + struct osd_cursor_state cursor; + /* OSD0, VID0, OSD1, VID1 */ + struct osd_window_state win[4]; + /* OSD0, OSD1 */ + struct osd_osdwin_state osdwin[2]; + /* OSD device Operations */ + struct vpbe_osd_ops ops; +}; + +struct osd_platform_data { + int field_inv_wa_enable; +}; + +#endif diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h new file mode 100644 index 00000000000..05dbe0ba514 --- /dev/null +++ b/include/media/davinci/vpbe_types.h @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_TYPES_H +#define _VPBE_TYPES_H + +enum vpbe_version { + VPBE_VERSION_1 = 1, + VPBE_VERSION_2, + VPBE_VERSION_3, +}; + +/* vpbe_timing_type - Timing types used in vpbe device */ +enum vpbe_enc_timings_type { + VPBE_ENC_STD = 0x1, + VPBE_ENC_DV_TIMINGS = 0x4, + /* Used when set timings through FB device interface */ + VPBE_ENC_TIMINGS_INVALID = 0x8, +}; + +/* + * struct vpbe_enc_mode_info + * @name: ptr to name string of the standard, "NTSC", "PAL" etc + * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard + * @interlaced: 1 - interlaced, 0 - non interlaced/progressive + * @xres: x or horizontal resolution of the display + * @yres: y or vertical resolution of the display + * @fps: frame per second + * @left_margin: left margin of the display + * @right_margin: right margin of the display + * @upper_margin: upper margin of the display + * @lower_margin: lower margin of the display + * @hsync_len: h-sync length + * @vsync_len: v-sync length + * @flags: bit field: bit usage is documented below + * + * Description: + * Structure holding timing and resolution information of a standard. + * Used by vpbe_device to set required non-standard timing in the + * venc when lcd controller output is connected to a external encoder. + * A table of timings is maintained in vpbe device to set this in + * venc when external encoder is connected to lcd controller output. + * Encoder may provide a g_dv_timings() API to override these values + * as needed. + * + * Notes + * ------ + * if_type should be used only by encoder manager and encoder. + * flags usage + * b0 (LSB) - hsync polarity, 0 - negative, 1 - positive + * b1 - vsync polarity, 0 - negative, 1 - positive + * b2 - field id polarity, 0 - negative, 1 - positive + */ +struct vpbe_enc_mode_info { + unsigned char *name; + enum vpbe_enc_timings_type timings_type; + v4l2_std_id std_id; + struct v4l2_dv_timings dv_timings; + unsigned int interlaced; + unsigned int xres; + unsigned int yres; + struct v4l2_fract aspect; + struct v4l2_fract fps; + unsigned int left_margin; + unsigned int right_margin; + unsigned int upper_margin; + unsigned int lower_margin; + unsigned int hsync_len; + unsigned int vsync_len; + unsigned int flags; +}; + +#endif diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h new file mode 100644 index 00000000000..476fafc2f52 --- /dev/null +++ b/include/media/davinci/vpbe_venc.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_VENC_H +#define _VPBE_VENC_H + +#include <media/v4l2-subdev.h> +#include <media/davinci/vpbe_types.h> + +#define DM644X_VPBE_VENC_SUBDEV_NAME "dm644x,vpbe-venc" +#define DM365_VPBE_VENC_SUBDEV_NAME "dm365,vpbe-venc" +#define DM355_VPBE_VENC_SUBDEV_NAME "dm355,vpbe-venc" + +/* venc events */ +#define VENC_END_OF_FRAME BIT(0) +#define VENC_FIRST_FIELD BIT(1) +#define VENC_SECOND_FIELD BIT(2) + +struct venc_platform_data { + int (*setup_pinmux)(enum v4l2_mbus_pixelcode if_type, + int field); + int (*setup_clock)(enum vpbe_enc_timings_type type, + unsigned int pixclock); + int (*setup_if_config)(enum v4l2_mbus_pixelcode pixcode); + /* Number of LCD outputs supported */ + int num_lcd_outputs; + struct vpbe_if_params *lcd_if_params; +}; + +enum venc_ioctls { + VENC_GET_FLD = 1, +}; + +/* exported functions */ +struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, + const char *venc_name); +#endif diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h index cc973ed845a..288772e6900 100644 --- a/include/media/davinci/vpfe_capture.h +++ b/include/media/davinci/vpfe_capture.h @@ -26,6 +26,7 @@ #include <linux/videodev2.h> #include <linux/clk.h> #include <linux/i2c.h> +#include <media/v4l2-fh.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> #include <media/videobuf-dma-contig.h> @@ -110,8 +111,6 @@ struct vpfe_device { struct v4l2_device v4l2_dev; /* parent device */ struct device *pdev; - /* Used to keep track of state of the priority */ - struct v4l2_prio_state prio; /* number of open instances of the channel */ u32 usrs; /* Indicates id of the field which is being displayed */ @@ -174,11 +173,10 @@ struct vpfe_device { /* File handle structure */ struct vpfe_fh { + struct v4l2_fh fh; struct vpfe_device *vpfe_dev; /* Indicates whether this file handle is doing IO */ u8 io_allowed; - /* Used to keep track priority of this instance */ - enum v4l2_priority prio; }; struct vpfe_config_params { diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h new file mode 100644 index 00000000000..3cb1704a065 --- /dev/null +++ b/include/media/davinci/vpif_types.h @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2011 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPIF_TYPES_H +#define _VPIF_TYPES_H + +#include <linux/i2c.h> + +#define VPIF_CAPTURE_MAX_CHANNELS 2 +#define VPIF_DISPLAY_MAX_CHANNELS 2 + +enum vpif_if_type { + VPIF_IF_BT656, + VPIF_IF_BT1120, + VPIF_IF_RAW_BAYER +}; + +struct vpif_interface { + enum vpif_if_type if_type; + unsigned hd_pol:1; + unsigned vd_pol:1; + unsigned fid_pol:1; +}; + +struct vpif_subdev_info { + const char *name; + struct i2c_board_info board_info; +}; + +struct vpif_output { + struct v4l2_output output; + const char *subdev_name; + u32 input_route; + u32 output_route; +}; + +struct vpif_display_chan_config { + const struct vpif_output *outputs; + int output_count; + bool clip_en; +}; + +struct vpif_display_config { + int (*set_clock)(int, int); + struct vpif_subdev_info *subdevinfo; + int subdev_count; + struct vpif_display_chan_config chan_config[VPIF_DISPLAY_MAX_CHANNELS]; + const char *card_name; + struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ + int *asd_sizes; /* 0-terminated array of asd group sizes */ +}; + +struct vpif_input { + struct v4l2_input input; + const char *subdev_name; + u32 input_route; + u32 output_route; +}; + +struct vpif_capture_chan_config { + struct vpif_interface vpif_if; + const struct vpif_input *inputs; + int input_count; +}; + +struct vpif_capture_config { + int (*setup_input_channel_mode)(int); + int (*setup_input_path)(int, const char *); + struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS]; + struct vpif_subdev_info *subdev_info; + int subdev_count; + const char *card_name; + struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ + int *asd_sizes; /* 0-terminated array of asd group sizes */ +}; +#endif /* _VPIF_TYPES_H */ diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h index b586495bcd5..153473daaa3 100644 --- a/include/media/davinci/vpss.h +++ b/include/media/davinci/vpss.h @@ -105,4 +105,20 @@ enum vpss_wbl_sel { }; /* clear wbl overflow flag for DM6446 */ int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel); + +/* set sync polarity*/ +void vpss_set_sync_pol(struct vpss_sync_pol sync); +/* set the PG_FRAME_SIZE register */ +void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size); +/* + * vpss_check_and_clear_interrupt - check and clear interrupt + * @irq - common enumerator for IRQ + * + * Following return values used:- + * 0 - interrupt occurred and cleared + * 1 - interrupt not occurred + * 2 - interrupt status not available + */ +int vpss_dma_complete_interrupt(void); + #endif diff --git a/include/media/exynos-fimc.h b/include/media/exynos-fimc.h new file mode 100644 index 00000000000..aa44660e204 --- /dev/null +++ b/include/media/exynos-fimc.h @@ -0,0 +1,161 @@ +/* + * Samsung S5P/Exynos4 SoC series camera interface driver header + * + * Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef S5P_FIMC_H_ +#define S5P_FIMC_H_ + +#include <media/media-entity.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-mediabus.h> + +/* + * Enumeration of data inputs to the camera subsystem. + */ +enum fimc_input { + FIMC_INPUT_PARALLEL_0 = 1, + FIMC_INPUT_PARALLEL_1, + FIMC_INPUT_MIPI_CSI2_0 = 3, + FIMC_INPUT_MIPI_CSI2_1, + FIMC_INPUT_WRITEBACK_A = 5, + FIMC_INPUT_WRITEBACK_B, + FIMC_INPUT_WRITEBACK_ISP = 5, +}; + +/* + * Enumeration of the FIMC data bus types. + */ +enum fimc_bus_type { + /* Camera parallel bus */ + FIMC_BUS_TYPE_ITU_601 = 1, + /* Camera parallel bus with embedded synchronization */ + FIMC_BUS_TYPE_ITU_656, + /* Camera MIPI-CSI2 serial bus */ + FIMC_BUS_TYPE_MIPI_CSI2, + /* FIFO link from LCD controller (WriteBack A) */ + FIMC_BUS_TYPE_LCD_WRITEBACK_A, + /* FIFO link from LCD controller (WriteBack B) */ + FIMC_BUS_TYPE_LCD_WRITEBACK_B, + /* FIFO link from FIMC-IS */ + FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B, +}; + +#define fimc_input_is_parallel(x) ((x) == 1 || (x) == 2) +#define fimc_input_is_mipi_csi(x) ((x) == 3 || (x) == 4) + +/* + * The subdevices' group IDs. + */ +#define GRP_ID_SENSOR (1 << 8) +#define GRP_ID_FIMC_IS_SENSOR (1 << 9) +#define GRP_ID_WRITEBACK (1 << 10) +#define GRP_ID_CSIS (1 << 11) +#define GRP_ID_FIMC (1 << 12) +#define GRP_ID_FLITE (1 << 13) +#define GRP_ID_FIMC_IS (1 << 14) + +/** + * struct fimc_source_info - video source description required for the host + * interface configuration + * + * @fimc_bus_type: FIMC camera input type + * @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc. + * @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*) + * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU) + */ +struct fimc_source_info { + enum fimc_bus_type fimc_bus_type; + enum fimc_bus_type sensor_bus_type; + u16 flags; + u16 mux_id; +}; + +/* + * v4l2_device notification id. This is only for internal use in the kernel. + * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single + * frame capture mode when there is only one VSYNC pulse issued by the sensor + * at begining of the frame transmission. + */ +#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0) + +#define FIMC_MAX_PLANES 3 + +/** + * struct fimc_fmt - color format data structure + * @mbus_code: media bus pixel code, -1 if not applicable + * @name: format description + * @fourcc: fourcc code for this format, 0 if not applicable + * @color: the driver's private color format id + * @memplanes: number of physically non-contiguous data planes + * @colplanes: number of physically contiguous data planes + * @colorspace: v4l2 colorspace (V4L2_COLORSPACE_*) + * @depth: per plane driver's private 'number of bits per pixel' + * @mdataplanes: bitmask indicating meta data plane(s), (1 << plane_no) + * @flags: flags indicating which operation mode format applies to + */ +struct fimc_fmt { + enum v4l2_mbus_pixelcode mbus_code; + char *name; + u32 fourcc; + u32 color; + u16 memplanes; + u16 colplanes; + u8 colorspace; + u8 depth[FIMC_MAX_PLANES]; + u16 mdataplanes; + u16 flags; +#define FMT_FLAGS_CAM (1 << 0) +#define FMT_FLAGS_M2M_IN (1 << 1) +#define FMT_FLAGS_M2M_OUT (1 << 2) +#define FMT_FLAGS_M2M (1 << 1 | 1 << 2) +#define FMT_HAS_ALPHA (1 << 3) +#define FMT_FLAGS_COMPRESSED (1 << 4) +#define FMT_FLAGS_WRITEBACK (1 << 5) +#define FMT_FLAGS_RAW_BAYER (1 << 6) +#define FMT_FLAGS_YUV (1 << 7) +}; + +struct exynos_media_pipeline; + +/* + * Media pipeline operations to be called from within a video node, i.e. the + * last entity within the pipeline. Implemented by related media device driver. + */ +struct exynos_media_pipeline_ops { + int (*prepare)(struct exynos_media_pipeline *p, + struct media_entity *me); + int (*unprepare)(struct exynos_media_pipeline *p); + int (*open)(struct exynos_media_pipeline *p, struct media_entity *me, + bool resume); + int (*close)(struct exynos_media_pipeline *p); + int (*set_stream)(struct exynos_media_pipeline *p, bool state); +}; + +struct exynos_video_entity { + struct video_device vdev; + struct exynos_media_pipeline *pipe; +}; + +struct exynos_media_pipeline { + struct media_pipeline mp; + const struct exynos_media_pipeline_ops *ops; +}; + +static inline struct exynos_video_entity *vdev_to_exynos_video_entity( + struct video_device *vdev) +{ + return container_of(vdev, struct exynos_video_entity, vdev); +} + +#define fimc_pipeline_call(ent, op, args...) \ + (!(ent) ? -ENOENT : (((ent)->pipe->ops && (ent)->pipe->ops->op) ? \ + (ent)->pipe->ops->op(((ent)->pipe), ##args) : -ENOIOCTLCMD)) \ + +#endif /* S5P_FIMC_H_ */ diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h new file mode 100644 index 00000000000..0142736a59d --- /dev/null +++ b/include/media/gpio-ir-recv.h @@ -0,0 +1,24 @@ +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __GPIO_IR_RECV_H__ +#define __GPIO_IR_RECV_H__ + +struct gpio_ir_recv_platform_data { + int gpio_nr; + bool active_low; + u64 allowed_protos; + const char *map_name; +}; + +#endif /* __GPIO_IR_RECV_H__ */ + diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h index 768aa77925c..e221bc74020 100644 --- a/include/media/ir-kbd-i2c.h +++ b/include/media/ir-kbd-i2c.h @@ -37,7 +37,7 @@ enum ir_kbd_get_key_fn { struct IR_i2c_init_data { char *ir_codes; const char *name; - u64 type; /* RC_TYPE_RC5, etc */ + u64 type; /* RC_BIT_RC5, etc */ u32 polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */ /* diff --git a/include/media/ir-rx51.h b/include/media/ir-rx51.h new file mode 100644 index 00000000000..104aa892f31 --- /dev/null +++ b/include/media/ir-rx51.h @@ -0,0 +1,10 @@ +#ifndef _LIRC_RX51_H +#define _LIRC_RX51_H + +struct lirc_rx51_platform_data { + int pwm_timer; + + int(*set_max_mpu_wakeup_lat)(struct device *dev, long t); +}; + +#endif diff --git a/include/media/lirc.h b/include/media/lirc.h index 6678a169fd9..4b3ab2966b5 100644 --- a/include/media/lirc.h +++ b/include/media/lirc.h @@ -137,7 +137,7 @@ */ #define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32) /* - * if filter cannot be set independantly for pulse/space, this should + * if filter cannot be set independently for pulse/space, this should * be used */ #define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32) diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h index 630e702c951..78f0637ca68 100644 --- a/include/media/lirc_dev.h +++ b/include/media/lirc_dev.h @@ -9,7 +9,7 @@ #ifndef _LINUX_LIRC_DEV_H #define _LINUX_LIRC_DEV_H -#define MAX_IRCTL_DEVICES 4 +#define MAX_IRCTL_DEVICES 8 #define BUFLEN 16 #define mod(n, div) ((n) % (div)) @@ -139,6 +139,7 @@ struct lirc_driver { struct lirc_buffer *rbuf; int (*set_use_inc) (void *data); void (*set_use_dec) (void *data); + struct rc_dev *rdev; const struct file_operations *fops; struct device *dev; struct module *owner; diff --git a/include/media/lm3560.h b/include/media/lm3560.h new file mode 100644 index 00000000000..46670706d6f --- /dev/null +++ b/include/media/lm3560.h @@ -0,0 +1,97 @@ +/* + * include/media/lm3560.h + * + * Copyright (C) 2013 Texas Instruments + * + * Contact: Daniel Jeong <gshark.jeong@gmail.com> + * Ldd-Mlp <ldd-mlp@list.ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __LM3560_H__ +#define __LM3560_H__ + +#include <media/v4l2-subdev.h> + +#define LM3560_NAME "lm3560" +#define LM3560_I2C_ADDR (0x53) + +/* FLASH Brightness + * min 62500uA, step 62500uA, max 1000000uA + */ +#define LM3560_FLASH_BRT_MIN 62500 +#define LM3560_FLASH_BRT_STEP 62500 +#define LM3560_FLASH_BRT_MAX 1000000 +#define LM3560_FLASH_BRT_uA_TO_REG(a) \ + ((a) < LM3560_FLASH_BRT_MIN ? 0 : \ + (((a) - LM3560_FLASH_BRT_MIN) / LM3560_FLASH_BRT_STEP)) +#define LM3560_FLASH_BRT_REG_TO_uA(a) \ + ((a) * LM3560_FLASH_BRT_STEP + LM3560_FLASH_BRT_MIN) + +/* FLASH TIMEOUT DURATION + * min 32ms, step 32ms, max 1024ms + */ +#define LM3560_FLASH_TOUT_MIN 32 +#define LM3560_FLASH_TOUT_STEP 32 +#define LM3560_FLASH_TOUT_MAX 1024 +#define LM3560_FLASH_TOUT_ms_TO_REG(a) \ + ((a) < LM3560_FLASH_TOUT_MIN ? 0 : \ + (((a) - LM3560_FLASH_TOUT_MIN) / LM3560_FLASH_TOUT_STEP)) +#define LM3560_FLASH_TOUT_REG_TO_ms(a) \ + ((a) * LM3560_FLASH_TOUT_STEP + LM3560_FLASH_TOUT_MIN) + +/* TORCH BRT + * min 31250uA, step 31250uA, max 250000uA + */ +#define LM3560_TORCH_BRT_MIN 31250 +#define LM3560_TORCH_BRT_STEP 31250 +#define LM3560_TORCH_BRT_MAX 250000 +#define LM3560_TORCH_BRT_uA_TO_REG(a) \ + ((a) < LM3560_TORCH_BRT_MIN ? 0 : \ + (((a) - LM3560_TORCH_BRT_MIN) / LM3560_TORCH_BRT_STEP)) +#define LM3560_TORCH_BRT_REG_TO_uA(a) \ + ((a) * LM3560_TORCH_BRT_STEP + LM3560_TORCH_BRT_MIN) + +enum lm3560_led_id { + LM3560_LED0 = 0, + LM3560_LED1, + LM3560_LED_MAX +}; + +enum lm3560_peak_current { + LM3560_PEAK_1600mA = 0x00, + LM3560_PEAK_2300mA = 0x20, + LM3560_PEAK_3000mA = 0x40, + LM3560_PEAK_3600mA = 0x60 +}; + +/* struct lm3560_platform_data + * + * @peak : peak current + * @max_flash_timeout: flash timeout + * @max_flash_brt: flash mode led brightness + * @max_torch_brt: torch mode led brightness + */ +struct lm3560_platform_data { + enum lm3560_peak_current peak; + + u32 max_flash_timeout; + u32 max_flash_brt[LM3560_LED_MAX]; + u32 max_torch_brt[LM3560_LED_MAX]; +}; + +#endif /* __LM3560_H__ */ diff --git a/include/media/lm3646.h b/include/media/lm3646.h new file mode 100644 index 00000000000..c6acf5a1d64 --- /dev/null +++ b/include/media/lm3646.h @@ -0,0 +1,87 @@ +/* + * include/media/lm3646.h + * + * Copyright (C) 2014 Texas Instruments + * + * Contact: Daniel Jeong <gshark.jeong@gmail.com> + * Ldd-Mlp <ldd-mlp@list.ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#ifndef __LM3646_H__ +#define __LM3646_H__ + +#include <media/v4l2-subdev.h> + +#define LM3646_NAME "lm3646" +#define LM3646_I2C_ADDR_REV1 (0x67) +#define LM3646_I2C_ADDR_REV0 (0x63) + +/* TOTAL FLASH Brightness Max + * min 93350uA, step 93750uA, max 1499600uA + */ +#define LM3646_TOTAL_FLASH_BRT_MIN 93350 +#define LM3646_TOTAL_FLASH_BRT_STEP 93750 +#define LM3646_TOTAL_FLASH_BRT_MAX 1499600 +#define LM3646_TOTAL_FLASH_BRT_uA_TO_REG(a) \ + ((a) < LM3646_TOTAL_FLASH_BRT_MIN ? 0 : \ + ((((a) - LM3646_TOTAL_FLASH_BRT_MIN) / LM3646_TOTAL_FLASH_BRT_STEP))) + +/* TOTAL TORCH Brightness Max + * min 23040uA, step 23430uA, max 187100uA + */ +#define LM3646_TOTAL_TORCH_BRT_MIN 23040 +#define LM3646_TOTAL_TORCH_BRT_STEP 23430 +#define LM3646_TOTAL_TORCH_BRT_MAX 187100 +#define LM3646_TOTAL_TORCH_BRT_uA_TO_REG(a) \ + ((a) < LM3646_TOTAL_TORCH_BRT_MIN ? 0 : \ + ((((a) - LM3646_TOTAL_TORCH_BRT_MIN) / LM3646_TOTAL_TORCH_BRT_STEP))) + +/* LED1 FLASH Brightness + * min 23040uA, step 11718uA, max 1499600uA + */ +#define LM3646_LED1_FLASH_BRT_MIN 23040 +#define LM3646_LED1_FLASH_BRT_STEP 11718 +#define LM3646_LED1_FLASH_BRT_MAX 1499600 +#define LM3646_LED1_FLASH_BRT_uA_TO_REG(a) \ + ((a) <= LM3646_LED1_FLASH_BRT_MIN ? 0 : \ + ((((a) - LM3646_LED1_FLASH_BRT_MIN) / LM3646_LED1_FLASH_BRT_STEP))+1) + +/* LED1 TORCH Brightness + * min 2530uA, step 1460uA, max 187100uA + */ +#define LM3646_LED1_TORCH_BRT_MIN 2530 +#define LM3646_LED1_TORCH_BRT_STEP 1460 +#define LM3646_LED1_TORCH_BRT_MAX 187100 +#define LM3646_LED1_TORCH_BRT_uA_TO_REG(a) \ + ((a) <= LM3646_LED1_TORCH_BRT_MIN ? 0 : \ + ((((a) - LM3646_LED1_TORCH_BRT_MIN) / LM3646_LED1_TORCH_BRT_STEP))+1) + +/* FLASH TIMEOUT DURATION + * min 50ms, step 50ms, max 400ms + */ +#define LM3646_FLASH_TOUT_MIN 50 +#define LM3646_FLASH_TOUT_STEP 50 +#define LM3646_FLASH_TOUT_MAX 400 +#define LM3646_FLASH_TOUT_ms_TO_REG(a) \ + ((a) <= LM3646_FLASH_TOUT_MIN ? 0 : \ + (((a) - LM3646_FLASH_TOUT_MIN) / LM3646_FLASH_TOUT_STEP)) + +/* struct lm3646_platform_data + * + * @flash_timeout: flash timeout + * @led1_flash_brt: led1 flash mode brightness, uA + * @led1_torch_brt: led1 torch mode brightness, uA + */ +struct lm3646_platform_data { + + u32 flash_timeout; + + u32 led1_flash_brt; + u32 led1_torch_brt; +}; + +#endif /* __LM3646_H__ */ diff --git a/include/media/m5mols.h b/include/media/m5mols.h new file mode 100644 index 00000000000..4a825ae5c6c --- /dev/null +++ b/include/media/m5mols.h @@ -0,0 +1,33 @@ +/* + * Driver header for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef MEDIA_M5MOLS_H +#define MEDIA_M5MOLS_H + +/** + * struct m5mols_platform_data - platform data for M-5MOLS driver + * @gpio_reset: GPIO driving the reset pin of M-5MOLS + * @reset_polarity: active state for gpio_reset pin, 0 or 1 + * @set_power: an additional callback to the board setup code + * to be called after enabling and before disabling + * the sensor's supply regulators + */ +struct m5mols_platform_data { + int gpio_reset; + u8 reset_polarity; + int (*set_power)(struct device *dev, int on); +}; + +#endif /* MEDIA_M5MOLS_H */ diff --git a/include/media/media-device.h b/include/media/media-device.h new file mode 100644 index 00000000000..6e6db78f1ee --- /dev/null +++ b/include/media/media-device.h @@ -0,0 +1,103 @@ +/* + * Media device + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _MEDIA_DEVICE_H +#define _MEDIA_DEVICE_H + +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> + +#include <media/media-devnode.h> +#include <media/media-entity.h> + +struct device; + +/** + * struct media_device - Media device + * @dev: Parent device + * @devnode: Media device node + * @model: Device model name + * @serial: Device serial number (optional) + * @bus_info: Unique and stable device location identifier + * @hw_revision: Hardware device revision + * @driver_version: Device driver version + * @entity_id: ID of the next entity to be registered + * @entities: List of registered entities + * @lock: Entities list lock + * @graph_mutex: Entities graph operation lock + * @link_notify: Link state change notification callback + * + * This structure represents an abstract high-level media device. It allows easy + * access to entities and provides basic media device-level support. The + * structure can be allocated directly or embedded in a larger structure. + * + * The parent @dev is a physical device. It must be set before registering the + * media device. + * + * @model is a descriptive model name exported through sysfs. It doesn't have to + * be unique. + */ +struct media_device { + /* dev->driver_data points to this struct. */ + struct device *dev; + struct media_devnode devnode; + + char model[32]; + char serial[40]; + char bus_info[32]; + u32 hw_revision; + u32 driver_version; + + u32 entity_id; + struct list_head entities; + + /* Protects the entities list */ + spinlock_t lock; + /* Serializes graph operations. */ + struct mutex graph_mutex; + + int (*link_notify)(struct media_link *link, u32 flags, + unsigned int notification); +}; + +/* Supported link_notify @notification values. */ +#define MEDIA_DEV_NOTIFY_PRE_LINK_CH 0 +#define MEDIA_DEV_NOTIFY_POST_LINK_CH 1 + +/* media_devnode to media_device */ +#define to_media_device(node) container_of(node, struct media_device, devnode) + +int __must_check __media_device_register(struct media_device *mdev, + struct module *owner); +#define media_device_register(mdev) __media_device_register(mdev, THIS_MODULE) +void media_device_unregister(struct media_device *mdev); + +int __must_check media_device_register_entity(struct media_device *mdev, + struct media_entity *entity); +void media_device_unregister_entity(struct media_entity *entity); + +/* Iterate over all entities. */ +#define media_device_for_each_entity(entity, mdev) \ + list_for_each_entry(entity, &(mdev)->entities, list) + +#endif diff --git a/include/media/media-devnode.h b/include/media/media-devnode.h new file mode 100644 index 00000000000..0dc7060f962 --- /dev/null +++ b/include/media/media-devnode.h @@ -0,0 +1,99 @@ +/* + * Media device node + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * -- + * + * Common functions for media-related drivers to register and unregister media + * device nodes. + */ + +#ifndef _MEDIA_DEVNODE_H +#define _MEDIA_DEVNODE_H + +#include <linux/poll.h> +#include <linux/fs.h> +#include <linux/device.h> +#include <linux/cdev.h> + +/* + * Flag to mark the media_devnode struct as registered. Drivers must not touch + * this flag directly, it will be set and cleared by media_devnode_register and + * media_devnode_unregister. + */ +#define MEDIA_FLAG_REGISTERED 0 + +struct media_file_operations { + struct module *owner; + ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); + ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); + unsigned int (*poll) (struct file *, struct poll_table_struct *); + long (*ioctl) (struct file *, unsigned int, unsigned long); + long (*compat_ioctl) (struct file *, unsigned int, unsigned long); + int (*open) (struct file *); + int (*release) (struct file *); +}; + +/** + * struct media_devnode - Media device node + * @parent: parent device + * @minor: device node minor number + * @flags: flags, combination of the MEDIA_FLAG_* constants + * + * This structure represents a media-related device node. + * + * The @parent is a physical device. It must be set by core or device drivers + * before registering the node. + */ +struct media_devnode { + /* device ops */ + const struct media_file_operations *fops; + + /* sysfs */ + struct device dev; /* media device */ + struct cdev cdev; /* character device */ + struct device *parent; /* device parent */ + + /* device info */ + int minor; + unsigned long flags; /* Use bitops to access flags */ + + /* callbacks */ + void (*release)(struct media_devnode *mdev); +}; + +/* dev to media_devnode */ +#define to_media_devnode(cd) container_of(cd, struct media_devnode, dev) + +int __must_check media_devnode_register(struct media_devnode *mdev, + struct module *owner); +void media_devnode_unregister(struct media_devnode *mdev); + +static inline struct media_devnode *media_devnode_data(struct file *filp) +{ + return filp->private_data; +} + +static inline int media_devnode_is_registered(struct media_devnode *mdev) +{ + return test_bit(MEDIA_FLAG_REGISTERED, &mdev->flags); +} + +#endif /* _MEDIA_DEVNODE_H */ diff --git a/include/media/media-entity.h b/include/media/media-entity.h new file mode 100644 index 00000000000..e00459185d2 --- /dev/null +++ b/include/media/media-entity.h @@ -0,0 +1,160 @@ +/* + * Media entity + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _MEDIA_ENTITY_H +#define _MEDIA_ENTITY_H + +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/media.h> + +struct media_pipeline { +}; + +struct media_link { + struct media_pad *source; /* Source pad */ + struct media_pad *sink; /* Sink pad */ + struct media_link *reverse; /* Link in the reverse direction */ + unsigned long flags; /* Link flags (MEDIA_LNK_FL_*) */ +}; + +struct media_pad { + struct media_entity *entity; /* Entity this pad belongs to */ + u16 index; /* Pad index in the entity pads array */ + unsigned long flags; /* Pad flags (MEDIA_PAD_FL_*) */ +}; + +struct media_entity_operations { + int (*link_setup)(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags); + int (*link_validate)(struct media_link *link); +}; + +struct media_entity { + struct list_head list; + struct media_device *parent; /* Media device this entity belongs to*/ + u32 id; /* Entity ID, unique in the parent media + * device context */ + const char *name; /* Entity name */ + u32 type; /* Entity type (MEDIA_ENT_T_*) */ + u32 revision; /* Entity revision, driver specific */ + unsigned long flags; /* Entity flags (MEDIA_ENT_FL_*) */ + u32 group_id; /* Entity group ID */ + + u16 num_pads; /* Number of sink and source pads */ + u16 num_links; /* Number of existing links, both + * enabled and disabled */ + u16 num_backlinks; /* Number of backlinks */ + u16 max_links; /* Maximum number of links */ + + struct media_pad *pads; /* Pads array (num_pads elements) */ + struct media_link *links; /* Links array (max_links elements)*/ + + const struct media_entity_operations *ops; /* Entity operations */ + + /* Reference counts must never be negative, but are signed integers on + * purpose: a simple WARN_ON(<0) check can be used to detect reference + * count bugs that would make them negative. + */ + int stream_count; /* Stream count for the entity. */ + int use_count; /* Use count for the entity. */ + + struct media_pipeline *pipe; /* Pipeline this entity belongs to. */ + + union { + /* Node specifications */ + struct { + u32 major; + u32 minor; + } v4l; + struct { + u32 major; + u32 minor; + } fb; + struct { + u32 card; + u32 device; + u32 subdevice; + } alsa; + int dvb; + + /* Sub-device specifications */ + /* Nothing needed yet */ + } info; +}; + +static inline u32 media_entity_type(struct media_entity *entity) +{ + return entity->type & MEDIA_ENT_TYPE_MASK; +} + +static inline u32 media_entity_subtype(struct media_entity *entity) +{ + return entity->type & MEDIA_ENT_SUBTYPE_MASK; +} + +#define MEDIA_ENTITY_ENUM_MAX_DEPTH 16 +#define MEDIA_ENTITY_ENUM_MAX_ID 64 + +struct media_entity_graph { + struct { + struct media_entity *entity; + int link; + } stack[MEDIA_ENTITY_ENUM_MAX_DEPTH]; + + DECLARE_BITMAP(entities, MEDIA_ENTITY_ENUM_MAX_ID); + int top; +}; + +int media_entity_init(struct media_entity *entity, u16 num_pads, + struct media_pad *pads, u16 extra_links); +void media_entity_cleanup(struct media_entity *entity); + +int media_entity_create_link(struct media_entity *source, u16 source_pad, + struct media_entity *sink, u16 sink_pad, u32 flags); +void __media_entity_remove_links(struct media_entity *entity); +void media_entity_remove_links(struct media_entity *entity); + +int __media_entity_setup_link(struct media_link *link, u32 flags); +int media_entity_setup_link(struct media_link *link, u32 flags); +struct media_link *media_entity_find_link(struct media_pad *source, + struct media_pad *sink); +struct media_pad *media_entity_remote_pad(struct media_pad *pad); + +struct media_entity *media_entity_get(struct media_entity *entity); +void media_entity_put(struct media_entity *entity); + +void media_entity_graph_walk_start(struct media_entity_graph *graph, + struct media_entity *entity); +struct media_entity * +media_entity_graph_walk_next(struct media_entity_graph *graph); +__must_check int media_entity_pipeline_start(struct media_entity *entity, + struct media_pipeline *pipe); +void media_entity_pipeline_stop(struct media_entity *entity); + +#define media_entity_call(entity, operation, args...) \ + (((entity)->ops && (entity)->ops->operation) ? \ + (entity)->ops->operation((entity) , ##args) : -ENOIOCTLCMD) + +#endif diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h new file mode 100644 index 00000000000..7611963a257 --- /dev/null +++ b/include/media/mmp-camera.h @@ -0,0 +1,9 @@ +/* + * Information for the Marvell Armada MMP camera + */ + +struct mmp_camera_platform_data { + struct platform_device *i2c_device; + int sensor_power_gpio; + int sensor_reset_gpio; +}; diff --git a/include/media/mt9m032.h b/include/media/mt9m032.h new file mode 100644 index 00000000000..c3a78114d7a --- /dev/null +++ b/include/media/mt9m032.h @@ -0,0 +1,36 @@ +/* + * Driver for MT9M032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund <gwlund@lundeng.com> + * Author: Martin Hostettler <martin@neutronstar.dyndns.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef MT9M032_H +#define MT9M032_H + +#define MT9M032_NAME "mt9m032" +#define MT9M032_I2C_ADDR (0xb8 >> 1) + +struct mt9m032_platform_data { + u32 ext_clock; + u32 pix_clock; + bool invert_pixclock; + +}; +#endif /* MT9M032_H */ diff --git a/include/media/mt9p031.h b/include/media/mt9p031.h new file mode 100644 index 00000000000..b1e63f2b72b --- /dev/null +++ b/include/media/mt9p031.h @@ -0,0 +1,18 @@ +#ifndef MT9P031_H +#define MT9P031_H + +struct v4l2_subdev; + +/* + * struct mt9p031_platform_data - MT9P031 platform data + * @reset: Chip reset GPIO (set to -1 if not used) + * @ext_freq: Input clock frequency + * @target_freq: Pixel clock frequency + */ +struct mt9p031_platform_data { + int reset; + int ext_freq; + int target_freq; +}; + +#endif diff --git a/include/media/mt9t001.h b/include/media/mt9t001.h new file mode 100644 index 00000000000..03fd63edd13 --- /dev/null +++ b/include/media/mt9t001.h @@ -0,0 +1,9 @@ +#ifndef _MEDIA_MT9T001_H +#define _MEDIA_MT9T001_H + +struct mt9t001_platform_data { + unsigned int clk_pol:1; + unsigned int ext_clk; +}; + +#endif diff --git a/include/media/mt9v022.h b/include/media/mt9v022.h new file mode 100644 index 00000000000..40561801321 --- /dev/null +++ b/include/media/mt9v022.h @@ -0,0 +1,16 @@ +/* + * mt9v022 sensor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MT9V022_H__ +#define __MT9V022_H__ + +struct mt9v022_platform_data { + unsigned short y_skip_top; /* Lines to skip at the top */ +}; + +#endif diff --git a/include/media/mt9v032.h b/include/media/mt9v032.h new file mode 100644 index 00000000000..12175a63c5b --- /dev/null +++ b/include/media/mt9v032.h @@ -0,0 +1,11 @@ +#ifndef _MEDIA_MT9V032_H +#define _MEDIA_MT9V032_H + +struct mt9v032_platform_data { + unsigned int clk_pol:1; + + const s64 *link_freqs; + s64 link_def_freq; +}; + +#endif diff --git a/include/media/noon010pc30.h b/include/media/noon010pc30.h new file mode 100644 index 00000000000..58eafee36b3 --- /dev/null +++ b/include/media/noon010pc30.h @@ -0,0 +1,28 @@ +/* + * Driver header for NOON010PC30L camera sensor chip. + * + * Copyright (c) 2010 Samsung Electronics, Co. Ltd + * Contact: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef NOON010PC30_H +#define NOON010PC30_H + +/** + * @clk_rate: the clock frequency in Hz + * @gpio_nreset: GPIO driving nRESET pin + * @gpio_nstby: GPIO driving nSTBY pin + */ + +struct noon010pc30_platform_data { + unsigned long clk_rate; + int gpio_nreset; + int gpio_nstby; +}; + +#endif /* NOON010PC30_H */ diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h new file mode 100644 index 00000000000..c9d06d9f7e6 --- /dev/null +++ b/include/media/omap3isp.h @@ -0,0 +1,163 @@ +/* + * omap3isp.h + * + * TI OMAP3 ISP - Platform data + * + * Copyright (C) 2011 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __MEDIA_OMAP3ISP_H__ +#define __MEDIA_OMAP3ISP_H__ + +struct i2c_board_info; +struct isp_device; + +enum isp_interface_type { + ISP_INTERFACE_PARALLEL, + ISP_INTERFACE_CSI2A_PHY2, + ISP_INTERFACE_CCP2B_PHY1, + ISP_INTERFACE_CCP2B_PHY2, + ISP_INTERFACE_CSI2C_PHY1, +}; + +enum { + ISP_LANE_SHIFT_0 = 0, + ISP_LANE_SHIFT_2 = 1, + ISP_LANE_SHIFT_4 = 2, + ISP_LANE_SHIFT_6 = 3, +}; + +/** + * struct isp_parallel_platform_data - Parallel interface platform data + * @data_lane_shift: Data lane shifter + * ISP_LANE_SHIFT_0 - CAMEXT[13:0] -> CAM[13:0] + * ISP_LANE_SHIFT_2 - CAMEXT[13:2] -> CAM[11:0] + * ISP_LANE_SHIFT_4 - CAMEXT[13:4] -> CAM[9:0] + * ISP_LANE_SHIFT_6 - CAMEXT[13:6] -> CAM[7:0] + * @clk_pol: Pixel clock polarity + * 0 - Sample on rising edge, 1 - Sample on falling edge + * @hs_pol: Horizontal synchronization polarity + * 0 - Active high, 1 - Active low + * @vs_pol: Vertical synchronization polarity + * 0 - Active high, 1 - Active low + * @data_pol: Data polarity + * 0 - Normal, 1 - One's complement + */ +struct isp_parallel_platform_data { + unsigned int data_lane_shift:2; + unsigned int clk_pol:1; + unsigned int hs_pol:1; + unsigned int vs_pol:1; + unsigned int data_pol:1; +}; + +enum { + ISP_CCP2_PHY_DATA_CLOCK = 0, + ISP_CCP2_PHY_DATA_STROBE = 1, +}; + +enum { + ISP_CCP2_MODE_MIPI = 0, + ISP_CCP2_MODE_CCP2 = 1, +}; + +/** + * struct isp_csiphy_lane: CCP2/CSI2 lane position and polarity + * @pos: position of the lane + * @pol: polarity of the lane + */ +struct isp_csiphy_lane { + u8 pos; + u8 pol; +}; + +#define ISP_CSIPHY1_NUM_DATA_LANES 1 +#define ISP_CSIPHY2_NUM_DATA_LANES 2 + +/** + * struct isp_csiphy_lanes_cfg - CCP2/CSI2 lane configuration + * @data: Configuration of one or two data lanes + * @clk: Clock lane configuration + */ +struct isp_csiphy_lanes_cfg { + struct isp_csiphy_lane data[ISP_CSIPHY2_NUM_DATA_LANES]; + struct isp_csiphy_lane clk; +}; + +/** + * struct isp_ccp2_platform_data - CCP2 interface platform data + * @strobe_clk_pol: Strobe/clock polarity + * 0 - Non Inverted, 1 - Inverted + * @crc: Enable the cyclic redundancy check + * @ccp2_mode: Enable CCP2 compatibility mode + * ISP_CCP2_MODE_MIPI - MIPI-CSI1 mode + * ISP_CCP2_MODE_CCP2 - CCP2 mode + * @phy_layer: Physical layer selection + * ISP_CCP2_PHY_DATA_CLOCK - Data/clock physical layer + * ISP_CCP2_PHY_DATA_STROBE - Data/strobe physical layer + * @vpclk_div: Video port output clock control + */ +struct isp_ccp2_platform_data { + unsigned int strobe_clk_pol:1; + unsigned int crc:1; + unsigned int ccp2_mode:1; + unsigned int phy_layer:1; + unsigned int vpclk_div:2; + struct isp_csiphy_lanes_cfg lanecfg; +}; + +/** + * struct isp_csi2_platform_data - CSI2 interface platform data + * @crc: Enable the cyclic redundancy check + * @vpclk_div: Video port output clock control + */ +struct isp_csi2_platform_data { + unsigned crc:1; + unsigned vpclk_div:2; + struct isp_csiphy_lanes_cfg lanecfg; +}; + +struct isp_subdev_i2c_board_info { + struct i2c_board_info *board_info; + int i2c_adapter_id; +}; + +struct isp_v4l2_subdevs_group { + struct isp_subdev_i2c_board_info *subdevs; + enum isp_interface_type interface; + union { + struct isp_parallel_platform_data parallel; + struct isp_ccp2_platform_data ccp2; + struct isp_csi2_platform_data csi2; + } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */ +}; + +struct isp_platform_xclk { + const char *dev_id; + const char *con_id; +}; + +struct isp_platform_data { + struct isp_platform_xclk xclks[2]; + struct isp_v4l2_subdevs_group *subdevs; + void (*set_constraints)(struct isp_device *isp, bool enable); +}; + +#endif /* __MEDIA_OMAP3ISP_H__ */ diff --git a/include/media/omap4iss.h b/include/media/omap4iss.h new file mode 100644 index 00000000000..0d7620db5e3 --- /dev/null +++ b/include/media/omap4iss.h @@ -0,0 +1,65 @@ +#ifndef ARCH_ARM_PLAT_OMAP4_ISS_H +#define ARCH_ARM_PLAT_OMAP4_ISS_H + +#include <linux/i2c.h> + +struct iss_device; + +enum iss_interface_type { + ISS_INTERFACE_CSI2A_PHY1, + ISS_INTERFACE_CSI2B_PHY2, +}; + +/** + * struct iss_csiphy_lane: CSI2 lane position and polarity + * @pos: position of the lane + * @pol: polarity of the lane + */ +struct iss_csiphy_lane { + u8 pos; + u8 pol; +}; + +#define ISS_CSIPHY1_NUM_DATA_LANES 4 +#define ISS_CSIPHY2_NUM_DATA_LANES 1 + +/** + * struct iss_csiphy_lanes_cfg - CSI2 lane configuration + * @data: Configuration of one or two data lanes + * @clk: Clock lane configuration + */ +struct iss_csiphy_lanes_cfg { + struct iss_csiphy_lane data[ISS_CSIPHY1_NUM_DATA_LANES]; + struct iss_csiphy_lane clk; +}; + +/** + * struct iss_csi2_platform_data - CSI2 interface platform data + * @crc: Enable the cyclic redundancy check + * @vpclk_div: Video port output clock control + */ +struct iss_csi2_platform_data { + unsigned crc:1; + unsigned vpclk_div:2; + struct iss_csiphy_lanes_cfg lanecfg; +}; + +struct iss_subdev_i2c_board_info { + struct i2c_board_info *board_info; + int i2c_adapter_id; +}; + +struct iss_v4l2_subdevs_group { + struct iss_subdev_i2c_board_info *subdevs; + enum iss_interface_type interface; + union { + struct iss_csi2_platform_data csi2; + } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */ +}; + +struct iss_platform_data { + struct iss_v4l2_subdevs_group *subdevs; + void (*set_constraints)(struct iss_device *iss, bool enable); +}; + +#endif diff --git a/include/media/ov7670.h b/include/media/ov7670.h new file mode 100644 index 00000000000..1913d512307 --- /dev/null +++ b/include/media/ov7670.h @@ -0,0 +1,22 @@ +/* + * A V4L2 driver for OmniVision OV7670 cameras. + * + * Copyright 2010 One Laptop Per Child + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ + +#ifndef __OV7670_H +#define __OV7670_H + +struct ov7670_config { + int min_width; /* Filter out smaller sizes */ + int min_height; /* Filter out smaller sizes */ + int clock_speed; /* External clock speed (MHz) */ + bool use_smbus; /* Use smbus I/O instead of I2C */ + bool pll_bypass; /* Choose whether to bypass the PLL */ + bool pclk_hb_disable; /* Disable toggling pixclk during horizontal blanking */ +}; + +#endif diff --git a/include/media/ov772x.h b/include/media/ov772x.h index 548bf1155c8..00dbb7c4fea 100644 --- a/include/media/ov772x.h +++ b/include/media/ov772x.h @@ -12,12 +12,9 @@ #ifndef __OV772X_H__ #define __OV772X_H__ -#include <media/soc_camera.h> - /* for flags */ #define OV772X_FLAG_VFLIP (1 << 0) /* Vertical flip image */ #define OV772X_FLAG_HFLIP (1 << 1) /* Horizontal flip image */ -#define OV772X_FLAG_8BIT (1 << 2) /* default 10 bit */ /* * for Edge ctrl @@ -32,22 +29,23 @@ struct ov772x_edge_ctrl { unsigned char lower; }; -#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */ -#define EDGE_STRENGTH_MASK 0x1F -#define EDGE_THRESHOLD_MASK 0x0F -#define EDGE_UPPER_MASK 0xFF -#define EDGE_LOWER_MASK 0xFF +#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */ +#define OV772X_EDGE_STRENGTH_MASK 0x1F +#define OV772X_EDGE_THRESHOLD_MASK 0x0F +#define OV772X_EDGE_UPPER_MASK 0xFF +#define OV772X_EDGE_LOWER_MASK 0xFF #define OV772X_AUTO_EDGECTRL(u, l) \ { \ - .upper = (u & EDGE_UPPER_MASK), \ - .lower = (l & EDGE_LOWER_MASK), \ + .upper = (u & OV772X_EDGE_UPPER_MASK), \ + .lower = (l & OV772X_EDGE_LOWER_MASK), \ } -#define OV772X_MANUAL_EDGECTRL(s, t) \ -{ \ - .strength = (s & EDGE_STRENGTH_MASK) | OV772X_MANUAL_EDGE_CTRL,\ - .threshold = (t & EDGE_THRESHOLD_MASK), \ +#define OV772X_MANUAL_EDGECTRL(s, t) \ +{ \ + .strength = (s & OV772X_EDGE_STRENGTH_MASK) | \ + OV772X_MANUAL_EDGE_CTRL, \ + .threshold = (t & OV772X_EDGE_THRESHOLD_MASK), \ } /* diff --git a/include/media/ov9650.h b/include/media/ov9650.h new file mode 100644 index 00000000000..d630cf9e028 --- /dev/null +++ b/include/media/ov9650.h @@ -0,0 +1,27 @@ +/* + * OV9650/OV9652 camera sensors driver + * + * Copyright (C) 2013 Sylwester Nawrocki <sylvester.nawrocki@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OV9650_H_ +#define OV9650_H_ + +/** + * struct ov9650_platform_data - ov9650 driver platform data + * @mclk_frequency: the sensor's master clock frequency in Hz + * @gpio_pwdn: number of a GPIO connected to OV965X PWDN pin + * @gpio_reset: number of a GPIO connected to OV965X RESET pin + * + * If any of @gpio_pwdn or @gpio_reset are unused then they should be + * set to a negative value. @mclk_frequency must always be specified. + */ +struct ov9650_platform_data { + unsigned long mclk_frequency; + int gpio_pwdn; + int gpio_reset; +}; +#endif /* OV9650_H_ */ diff --git a/include/media/pwc-ioctl.h b/include/media/pwc-ioctl.h deleted file mode 100644 index 0f19779c463..00000000000 --- a/include/media/pwc-ioctl.h +++ /dev/null @@ -1,324 +0,0 @@ -#ifndef PWC_IOCTL_H -#define PWC_IOCTL_H - -/* (C) 2001-2004 Nemosoft Unv. - (C) 2004-2006 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -/* This is pwc-ioctl.h belonging to PWC 10.0.10 - It contains structures and defines to communicate from user space - directly to the driver. - */ - -/* - Changes - 2001/08/03 Alvarado Added ioctl constants to access methods for - changing white balance and red/blue gains - 2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE - 2003/12/13 Nemosft Unv. Some modifications to make interfacing to - PWCX easier - 2006/01/01 Luc Saillard Add raw format definition - */ - -/* These are private ioctl() commands, specific for the Philips webcams. - They contain functions not found in other webcams, and settings not - specified in the Video4Linux API. - - The #define names are built up like follows: - VIDIOC VIDeo IOCtl prefix - PWC Philps WebCam - G optional: Get - S optional: Set - ... the function - */ - -#include <linux/types.h> -#include <linux/version.h> - -/* Enumeration of image sizes */ -#define PSZ_SQCIF 0x00 -#define PSZ_QSIF 0x01 -#define PSZ_QCIF 0x02 -#define PSZ_SIF 0x03 -#define PSZ_CIF 0x04 -#define PSZ_VGA 0x05 -#define PSZ_MAX 6 - - -/* The frame rate is encoded in the video_window.flags parameter using - the upper 16 bits, since some flags are defined nowadays. The following - defines provide a mask and shift to filter out this value. - This value can also be passing using the private flag when using v4l2 and - VIDIOC_S_FMT ioctl. - - In 'Snapshot' mode the camera freezes its automatic exposure and colour - balance controls. - */ -#define PWC_FPS_SHIFT 16 -#define PWC_FPS_MASK 0x00FF0000 -#define PWC_FPS_FRMASK 0x003F0000 -#define PWC_FPS_SNAPSHOT 0x00400000 -#define PWC_QLT_MASK 0x03000000 -#define PWC_QLT_SHIFT 24 - - -/* structure for transferring x & y coordinates */ -struct pwc_coord -{ - int x, y; /* guess what */ - int size; /* size, or offset */ -}; - - -/* Used with VIDIOCPWCPROBE */ -struct pwc_probe -{ - char name[32]; - int type; -}; - -struct pwc_serial -{ - char serial[30]; /* String with serial number. Contains terminating 0 */ -}; - -/* pwc_whitebalance.mode values */ -#define PWC_WB_INDOOR 0 -#define PWC_WB_OUTDOOR 1 -#define PWC_WB_FL 2 -#define PWC_WB_MANUAL 3 -#define PWC_WB_AUTO 4 - -/* Used with VIDIOCPWC[SG]AWB (Auto White Balance). - Set mode to one of the PWC_WB_* values above. - *red and *blue are the respective gains of these colour components inside - the camera; range 0..65535 - When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read; - otherwise undefined. - 'read_red' and 'read_blue' are read-only. -*/ -struct pwc_whitebalance -{ - int mode; - int manual_red, manual_blue; /* R/W */ - int read_red, read_blue; /* R/O */ -}; - -/* - 'control_speed' and 'control_delay' are used in automatic whitebalance mode, - and tell the camera how fast it should react to changes in lighting, and - with how much delay. Valid values are 0..65535. -*/ -struct pwc_wb_speed -{ - int control_speed; - int control_delay; - -}; - -/* Used with VIDIOCPWC[SG]LED */ -struct pwc_leds -{ - int led_on; /* Led on-time; range = 0..25000 */ - int led_off; /* Led off-time; range = 0..25000 */ -}; - -/* Image size (used with GREALSIZE) */ -struct pwc_imagesize -{ - int width; - int height; -}; - -/* Defines and structures for Motorized Pan & Tilt */ -#define PWC_MPT_PAN 0x01 -#define PWC_MPT_TILT 0x02 -#define PWC_MPT_TIMEOUT 0x04 /* for status */ - -/* Set angles; when absolute != 0, the angle is absolute and the - driver calculates the relative offset for you. This can only - be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns - absolute angles. - */ -struct pwc_mpt_angles -{ - int absolute; /* write-only */ - int pan; /* degrees * 100 */ - int tilt; /* degress * 100 */ -}; - -/* Range of angles of the camera, both horizontally and vertically. - */ -struct pwc_mpt_range -{ - int pan_min, pan_max; /* degrees * 100 */ - int tilt_min, tilt_max; -}; - -struct pwc_mpt_status -{ - int status; - int time_pan; - int time_tilt; -}; - - -/* This is used for out-of-kernel decompression. With it, you can get - all the necessary information to initialize and use the decompressor - routines in standalone applications. - */ -struct pwc_video_command -{ - int type; /* camera type (645, 675, 730, etc.) */ - int release; /* release number */ - - int size; /* one of PSZ_* */ - int alternate; - int command_len; /* length of USB video command */ - unsigned char command_buf[13]; /* Actual USB video command */ - int bandlength; /* >0 = compressed */ - int frame_size; /* Size of one (un)compressed frame */ -}; - -/* Flags for PWCX subroutines. Not all modules honour all flags. */ -#define PWCX_FLAG_PLANAR 0x0001 -#define PWCX_FLAG_BAYER 0x0008 - - -/* IOCTL definitions */ - - /* Restore user settings */ -#define VIDIOCPWCRUSER _IO('v', 192) - /* Save user settings */ -#define VIDIOCPWCSUSER _IO('v', 193) - /* Restore factory settings */ -#define VIDIOCPWCFACTORY _IO('v', 194) - - /* You can manipulate the compression factor. A compression preference of 0 - means use uncompressed modes when available; 1 is low compression, 2 is - medium and 3 is high compression preferred. Of course, the higher the - compression, the lower the bandwidth used but more chance of artefacts - in the image. The driver automatically chooses a higher compression when - the preferred mode is not available. - */ - /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */ -#define VIDIOCPWCSCQUAL _IOW('v', 195, int) - /* Get preferred compression quality */ -#define VIDIOCPWCGCQUAL _IOR('v', 195, int) - - -/* Retrieve serial number of camera */ -#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial) - - /* This is a probe function; since so many devices are supported, it - becomes difficult to include all the names in programs that want to - check for the enhanced Philips stuff. So in stead, try this PROBE; - it returns a structure with the original name, and the corresponding - Philips type. - To use, fill the structure with zeroes, call PROBE and if that succeeds, - compare the name with that returned from VIDIOCGCAP; they should be the - same. If so, you can be assured it is a Philips (OEM) cam and the type - is valid. - */ -#define VIDIOCPWCPROBE _IOR('v', 199, struct pwc_probe) - - /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */ -#define VIDIOCPWCSAGC _IOW('v', 200, int) - /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */ -#define VIDIOCPWCGAGC _IOR('v', 200, int) - /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */ -#define VIDIOCPWCSSHUTTER _IOW('v', 201, int) - - /* Color compensation (Auto White Balance) */ -#define VIDIOCPWCSAWB _IOW('v', 202, struct pwc_whitebalance) -#define VIDIOCPWCGAWB _IOR('v', 202, struct pwc_whitebalance) - - /* Auto WB speed */ -#define VIDIOCPWCSAWBSPEED _IOW('v', 203, struct pwc_wb_speed) -#define VIDIOCPWCGAWBSPEED _IOR('v', 203, struct pwc_wb_speed) - - /* LEDs on/off/blink; int range 0..65535 */ -#define VIDIOCPWCSLED _IOW('v', 205, struct pwc_leds) -#define VIDIOCPWCGLED _IOR('v', 205, struct pwc_leds) - - /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */ -#define VIDIOCPWCSCONTOUR _IOW('v', 206, int) -#define VIDIOCPWCGCONTOUR _IOR('v', 206, int) - - /* Backlight compensation; 0 = off, otherwise on */ -#define VIDIOCPWCSBACKLIGHT _IOW('v', 207, int) -#define VIDIOCPWCGBACKLIGHT _IOR('v', 207, int) - - /* Flickerless mode; = 0 off, otherwise on */ -#define VIDIOCPWCSFLICKER _IOW('v', 208, int) -#define VIDIOCPWCGFLICKER _IOR('v', 208, int) - - /* Dynamic noise reduction; 0 off, 3 = high noise reduction */ -#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int) -#define VIDIOCPWCGDYNNOISE _IOR('v', 209, int) - - /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */ -#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize) - - /* Motorized pan & tilt functions */ -#define VIDIOCPWCMPTRESET _IOW('v', 211, int) -#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range) -#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles) -#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles) -#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status) - - /* Get the USB set-video command; needed for initializing libpwcx */ -#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command) -struct pwc_table_init_buffer { - int len; - char *buffer; - -}; -#define VIDIOCPWCGVIDTABLE _IOR('v', 216, struct pwc_table_init_buffer) - -/* - * This is private command used when communicating with v4l2. - * In the future all private ioctl will be remove/replace to - * use interface offer by v4l2. - */ - -#define V4L2_CID_PRIVATE_SAVE_USER (V4L2_CID_PRIVATE_BASE + 0) -#define V4L2_CID_PRIVATE_RESTORE_USER (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PRIVATE_RESTORE_FACTORY (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_PRIVATE_COLOUR_MODE (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_PRIVATE_AUTOCONTOUR (V4L2_CID_PRIVATE_BASE + 4) -#define V4L2_CID_PRIVATE_CONTOUR (V4L2_CID_PRIVATE_BASE + 5) -#define V4L2_CID_PRIVATE_BACKLIGHT (V4L2_CID_PRIVATE_BASE + 6) -#define V4L2_CID_PRIVATE_FLICKERLESS (V4L2_CID_PRIVATE_BASE + 7) -#define V4L2_CID_PRIVATE_NOISE_REDUCTION (V4L2_CID_PRIVATE_BASE + 8) - -struct pwc_raw_frame { - __le16 type; /* type of the webcam */ - __le16 vbandlength; /* Size of 4lines compressed (used by the decompressor) */ - __u8 cmd[4]; /* the four byte of the command (in case of nala, - only the first 3 bytes is filled) */ - __u8 rawframe[0]; /* frame_size = H/4*vbandlength */ -} __attribute__ ((packed)); - - -#endif diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 2963263f31e..fde142e5f25 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -1,7 +1,7 @@ /* * Remote Controller core header * - * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * Copyright (C) 2009-2010 by Mauro Carvalho Chehab * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,8 +23,11 @@ #include <media/rc-map.h> extern int rc_core_debug; -#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt , __func__, ## arg) +#define IR_dprintk(level, fmt, ...) \ +do { \ + if (rc_core_debug >= level) \ + pr_debug("%s: " fmt, __func__, ##__VA_ARGS__); \ +} while (0) enum rc_driver_type { RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */ @@ -32,20 +35,49 @@ enum rc_driver_type { }; /** + * struct rc_scancode_filter - Filter scan codes. + * @data: Scancode data to match. + * @mask: Mask of bits of scancode to compare. + */ +struct rc_scancode_filter { + u32 data; + u32 mask; +}; + +/** + * enum rc_filter_type - Filter type constants. + * @RC_FILTER_NORMAL: Filter for normal operation. + * @RC_FILTER_WAKEUP: Filter for waking from suspend. + * @RC_FILTER_MAX: Number of filter types. + */ +enum rc_filter_type { + RC_FILTER_NORMAL = 0, + RC_FILTER_WAKEUP, + + RC_FILTER_MAX +}; + +/** * struct rc_dev - represents a remote control device * @dev: driver model's view of this device + * @sysfs_groups: sysfs attribute groups * @input_name: name of the input child device * @input_phys: physical path to the input child device * @input_id: id of the input child device (struct input_id) * @driver_name: name of the hardware driver which registered this device * @map_name: name of the default keymap * @rc_map: current scan/key table + * @lock: used to ensure we've filled in all protocol details before + * anyone can call show_protocols or store_protocols * @devno: unique remote control device number * @raw: additional data for raw pulse/space devices * @input_dev: the input child device used to communicate events to userspace - * @driver_type: specifies if protocol decoding is done in hardware or software + * @driver_type: specifies if protocol decoding is done in hardware or software * @idle: used to keep track of RX state - * @allowed_protos: bitmask with the supported RC_TYPE_* protocols + * @allowed_protocols: bitmask with the supported RC_BIT_* protocols for each + * filter type + * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols for each + * filter type * @scanmask: some hardware decoders are not capable of providing the full * scancode to the application. As this is a hardware limit, we can't do * anything with it. Yet, as the same keycode table can be used with other @@ -64,7 +96,10 @@ enum rc_driver_type { * @max_timeout: maximum timeout supported by device * @rx_resolution : resolution (in ns) of input sampler * @tx_resolution: resolution (in ns) of output sampler + * @scancode_filters: scancode filters (indexed by enum rc_filter_type) * @change_protocol: allow changing the protocol used on hardware decoders + * @change_wakeup_protocol: allow changing the protocol used for wakeup + * filtering * @open: callback to allow drivers to enable polling/irq when IR input device * is opened. * @close: callback to allow drivers to disable polling/irq when IR input device @@ -78,21 +113,27 @@ enum rc_driver_type { * device doesn't interrupt host until it sees IR pulses * @s_learning_mode: enable wide band receiver used for learning * @s_carrier_report: enable carrier reports + * @s_filter: set the scancode filter + * @s_wakeup_filter: set the wakeup scancode filter */ struct rc_dev { struct device dev; + const struct attribute_group *sysfs_groups[5]; const char *input_name; const char *input_phys; struct input_id input_id; char *driver_name; const char *map_name; - struct rc_map rc_map; + struct rc_map rc_map; + struct mutex lock; unsigned long devno; struct ir_raw_event_ctrl *raw; struct input_dev *input_dev; enum rc_driver_type driver_type; bool idle; - u64 allowed_protos; + u64 allowed_protocols[RC_FILTER_MAX]; + u64 enabled_protocols[RC_FILTER_MAX]; + u32 users; u32 scanmask; void *priv; spinlock_t keylock; @@ -107,21 +148,63 @@ struct rc_dev { u32 max_timeout; u32 rx_resolution; u32 tx_resolution; - int (*change_protocol)(struct rc_dev *dev, u64 rc_type); + struct rc_scancode_filter scancode_filters[RC_FILTER_MAX]; + int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); + int (*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type); int (*open)(struct rc_dev *dev); void (*close)(struct rc_dev *dev); int (*s_tx_mask)(struct rc_dev *dev, u32 mask); int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); - int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n); + int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n); void (*s_idle)(struct rc_dev *dev, bool enable); int (*s_learning_mode)(struct rc_dev *dev, int enable); int (*s_carrier_report) (struct rc_dev *dev, int enable); + int (*s_filter)(struct rc_dev *dev, + struct rc_scancode_filter *filter); + int (*s_wakeup_filter)(struct rc_dev *dev, + struct rc_scancode_filter *filter); }; #define to_rc_dev(d) container_of(d, struct rc_dev, dev) +static inline bool rc_protocols_allowed(struct rc_dev *rdev, u64 protos) +{ + return rdev->allowed_protocols[RC_FILTER_NORMAL] & protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_allowed_protocols(struct rc_dev *rdev, u64 protos) +{ + rdev->allowed_protocols[RC_FILTER_NORMAL] = protos; +} + +static inline bool rc_protocols_enabled(struct rc_dev *rdev, u64 protos) +{ + return rdev->enabled_protocols[RC_FILTER_NORMAL] & protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_enabled_protocols(struct rc_dev *rdev, u64 protos) +{ + rdev->enabled_protocols[RC_FILTER_NORMAL] = protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_allowed_wakeup_protocols(struct rc_dev *rdev, + u64 protos) +{ + rdev->allowed_protocols[RC_FILTER_WAKEUP] = protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_enabled_wakeup_protocols(struct rc_dev *rdev, + u64 protos) +{ + rdev->enabled_protocols[RC_FILTER_WAKEUP] = protos; +} + /* * From rc-main.c * Those functions can be used on any type of Remote Controller. They @@ -134,6 +217,9 @@ void rc_free_device(struct rc_dev *dev); int rc_register_device(struct rc_dev *dev); void rc_unregister_device(struct rc_dev *dev); +int rc_open(struct rc_dev *rdev); +void rc_close(struct rc_dev *rdev); + void rc_repeat(struct rc_dev *dev); void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle); void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle); diff --git a/include/media/rc-map.h b/include/media/rc-map.h index ee9e2f747c7..e5aa2409c0e 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -1,7 +1,7 @@ /* * rc-map.h - define RC map names used by RC drivers * - * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * Copyright (c) 2010 by Mauro Carvalho Chehab * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,19 +11,56 @@ #include <linux/input.h> -#define RC_TYPE_UNKNOWN 0 -#define RC_TYPE_RC5 (1 << 0) /* Philips RC5 protocol */ -#define RC_TYPE_NEC (1 << 1) -#define RC_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */ -#define RC_TYPE_JVC (1 << 3) /* JVC protocol */ -#define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ -#define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */ -#define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */ -#define RC_TYPE_OTHER (1u << 31) +enum rc_type { + RC_TYPE_UNKNOWN = 0, /* Protocol not known */ + RC_TYPE_OTHER = 1, /* Protocol known but proprietary */ + RC_TYPE_LIRC = 2, /* Pass raw IR to lirc userspace */ + RC_TYPE_RC5 = 3, /* Philips RC5 protocol */ + RC_TYPE_RC5X = 4, /* Philips RC5x protocol */ + RC_TYPE_RC5_SZ = 5, /* StreamZap variant of RC5 */ + RC_TYPE_JVC = 6, /* JVC protocol */ + RC_TYPE_SONY12 = 7, /* Sony 12 bit protocol */ + RC_TYPE_SONY15 = 8, /* Sony 15 bit protocol */ + RC_TYPE_SONY20 = 9, /* Sony 20 bit protocol */ + RC_TYPE_NEC = 10, /* NEC protocol */ + RC_TYPE_SANYO = 11, /* Sanyo protocol */ + RC_TYPE_MCE_KBD = 12, /* RC6-ish MCE keyboard/mouse */ + RC_TYPE_RC6_0 = 13, /* Philips RC6-0-16 protocol */ + RC_TYPE_RC6_6A_20 = 14, /* Philips RC6-6A-20 protocol */ + RC_TYPE_RC6_6A_24 = 15, /* Philips RC6-6A-24 protocol */ + RC_TYPE_RC6_6A_32 = 16, /* Philips RC6-6A-32 protocol */ + RC_TYPE_RC6_MCE = 17, /* MCE (Philips RC6-6A-32 subtype) protocol */ + RC_TYPE_SHARP = 18, /* Sharp protocol */ +}; + +#define RC_BIT_NONE 0 +#define RC_BIT_UNKNOWN (1 << RC_TYPE_UNKNOWN) +#define RC_BIT_OTHER (1 << RC_TYPE_OTHER) +#define RC_BIT_LIRC (1 << RC_TYPE_LIRC) +#define RC_BIT_RC5 (1 << RC_TYPE_RC5) +#define RC_BIT_RC5X (1 << RC_TYPE_RC5X) +#define RC_BIT_RC5_SZ (1 << RC_TYPE_RC5_SZ) +#define RC_BIT_JVC (1 << RC_TYPE_JVC) +#define RC_BIT_SONY12 (1 << RC_TYPE_SONY12) +#define RC_BIT_SONY15 (1 << RC_TYPE_SONY15) +#define RC_BIT_SONY20 (1 << RC_TYPE_SONY20) +#define RC_BIT_NEC (1 << RC_TYPE_NEC) +#define RC_BIT_SANYO (1 << RC_TYPE_SANYO) +#define RC_BIT_MCE_KBD (1 << RC_TYPE_MCE_KBD) +#define RC_BIT_RC6_0 (1 << RC_TYPE_RC6_0) +#define RC_BIT_RC6_6A_20 (1 << RC_TYPE_RC6_6A_20) +#define RC_BIT_RC6_6A_24 (1 << RC_TYPE_RC6_6A_24) +#define RC_BIT_RC6_6A_32 (1 << RC_TYPE_RC6_6A_32) +#define RC_BIT_RC6_MCE (1 << RC_TYPE_RC6_MCE) +#define RC_BIT_SHARP (1 << RC_TYPE_SHARP) -#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \ - RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ - RC_TYPE_RC5_SZ | RC_TYPE_OTHER) +#define RC_BIT_ALL (RC_BIT_UNKNOWN | RC_BIT_OTHER | RC_BIT_LIRC | \ + RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ | \ + RC_BIT_JVC | \ + RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20 | \ + RC_BIT_NEC | RC_BIT_SANYO | RC_BIT_MCE_KBD | \ + RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | \ + RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE | RC_BIT_SHARP) struct rc_map_table { u32 scancode; @@ -35,7 +72,7 @@ struct rc_map { unsigned int size; /* Max number of entries */ unsigned int len; /* Used number of entries */ unsigned int alloc; /* Size of *scan in bytes */ - u64 rc_type; + enum rc_type rc_type; const char *name; spinlock_t lock; }; @@ -59,7 +96,9 @@ void rc_map_init(void); #define RC_MAP_ANYSEE "rc-anysee" #define RC_MAP_APAC_VIEWCOMP "rc-apac-viewcomp" #define RC_MAP_ASUS_PC39 "rc-asus-pc39" +#define RC_MAP_ASUS_PS3_100 "rc-asus-ps3-100" #define RC_MAP_ATI_TV_WONDER_HD_600 "rc-ati-tv-wonder-hd-600" +#define RC_MAP_ATI_X10 "rc-ati-x10" #define RC_MAP_AVERMEDIA_A16D "rc-avermedia-a16d" #define RC_MAP_AVERMEDIA_CARDBUS "rc-avermedia-cardbus" #define RC_MAP_AVERMEDIA_DVBT "rc-avermedia-dvbt" @@ -74,6 +113,7 @@ void rc_map_init(void); #define RC_MAP_BUDGET_CI_OLD "rc-budget-ci-old" #define RC_MAP_CINERGY_1400 "rc-cinergy-1400" #define RC_MAP_CINERGY "rc-cinergy" +#define RC_MAP_DELOCK_61959 "rc-delock-61959" #define RC_MAP_DIB0700_NEC_TABLE "rc-dib0700-nec" #define RC_MAP_DIB0700_RC5_TABLE "rc-dib0700-rc5" #define RC_MAP_DIGITALNOW_TINYTWIN "rc-digitalnow-tinytwin" @@ -94,17 +134,23 @@ void rc_map_init(void); #define RC_MAP_GADMEI_RM008Z "rc-gadmei-rm008z" #define RC_MAP_GENIUS_TVGO_A11MCE "rc-genius-tvgo-a11mce" #define RC_MAP_GOTVIEW7135 "rc-gotview7135" -#define RC_MAP_HAUPPAUGE_NEW "rc-hauppauge-new" +#define RC_MAP_HAUPPAUGE_NEW "rc-hauppauge" #define RC_MAP_IMON_MCE "rc-imon-mce" #define RC_MAP_IMON_PAD "rc-imon-pad" #define RC_MAP_IODATA_BCTV7E "rc-iodata-bctv7e" +#define RC_MAP_IT913X_V1 "rc-it913x-v1" +#define RC_MAP_IT913X_V2 "rc-it913x-v2" #define RC_MAP_KAIOMY "rc-kaiomy" #define RC_MAP_KWORLD_315U "rc-kworld-315u" +#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u" #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog" #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" #define RC_MAP_LIRC "rc-lirc" #define RC_MAP_LME2510 "rc-lme2510" #define RC_MAP_MANLI "rc-manli" +#define RC_MAP_MEDION_X10 "rc-medion-x10" +#define RC_MAP_MEDION_X10_DIGITAINER "rc-medion-x10-digitainer" +#define RC_MAP_MEDION_X10_OR2X "rc-medion-x10-or2x" #define RC_MAP_MSI_DIGIVOX_II "rc-msi-digivox-ii" #define RC_MAP_MSI_DIGIVOX_III "rc-msi-digivox-iii" #define RC_MAP_MSI_TVANYWHERE_PLUS "rc-msi-tvanywhere-plus" @@ -125,24 +171,31 @@ void rc_map_init(void); #define RC_MAP_PROTEUS_2309 "rc-proteus-2309" #define RC_MAP_PURPLETV "rc-purpletv" #define RC_MAP_PV951 "rc-pv951" -#define RC_MAP_RC5_HAUPPAUGE_NEW "rc-rc5-hauppauge-new" +#define RC_MAP_HAUPPAUGE "rc-hauppauge" #define RC_MAP_RC5_TV "rc-rc5-tv" #define RC_MAP_RC6_MCE "rc-rc6-mce" #define RC_MAP_REAL_AUDIO_220_32_KEYS "rc-real-audio-220-32-keys" +#define RC_MAP_REDDO "rc-reddo" +#define RC_MAP_SNAPSTREAM_FIREFLY "rc-snapstream-firefly" #define RC_MAP_STREAMZAP "rc-streamzap" #define RC_MAP_TBS_NEC "rc-tbs-nec" +#define RC_MAP_TECHNISAT_USB2 "rc-technisat-usb2" #define RC_MAP_TERRATEC_CINERGY_XS "rc-terratec-cinergy-xs" #define RC_MAP_TERRATEC_SLIM "rc-terratec-slim" +#define RC_MAP_TERRATEC_SLIM_2 "rc-terratec-slim-2" #define RC_MAP_TEVII_NEC "rc-tevii-nec" +#define RC_MAP_TIVO "rc-tivo" #define RC_MAP_TOTAL_MEDIA_IN_HAND "rc-total-media-in-hand" +#define RC_MAP_TOTAL_MEDIA_IN_HAND_02 "rc-total-media-in-hand-02" #define RC_MAP_TREKSTOR "rc-trekstor" #define RC_MAP_TT_1500 "rc-tt-1500" #define RC_MAP_TWINHAN_VP1027_DVBS "rc-twinhan1027" -#define RC_MAP_VIDEOMATE_M1F "rc-videomate-m1f" +#define RC_MAP_VIDEOMATE_K100 "rc-videomate-k100" #define RC_MAP_VIDEOMATE_S350 "rc-videomate-s350" #define RC_MAP_VIDEOMATE_TV_PVR "rc-videomate-tv-pvr" #define RC_MAP_WINFAST "rc-winfast" #define RC_MAP_WINFAST_USBII_DELUXE "rc-winfast-usbii-deluxe" +#define RC_MAP_SU3000 "rc-su3000" /* * Please, do not just append newer Remote Controller names at the end. diff --git a/include/media/s3c_camif.h b/include/media/s3c_camif.h new file mode 100644 index 00000000000..df96c2c789b --- /dev/null +++ b/include/media/s3c_camif.h @@ -0,0 +1,45 @@ +/* + * s3c24xx/s3c64xx SoC series Camera Interface (CAMIF) driver + * + * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef MEDIA_S3C_CAMIF_ +#define MEDIA_S3C_CAMIF_ + +#include <linux/i2c.h> +#include <media/v4l2-mediabus.h> + +/** + * struct s3c_camif_sensor_info - an image sensor description + * @i2c_board_info: pointer to an I2C sensor subdevice board info + * @clock_frequency: frequency of the clock the host provides to a sensor + * @mbus_type: media bus type + * @i2c_bus_num: i2c control bus id the sensor is attached to + * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*) + * @use_field: 1 if parallel bus FIELD signal is used (only s3c64xx) + */ +struct s3c_camif_sensor_info { + struct i2c_board_info i2c_board_info; + unsigned long clock_frequency; + enum v4l2_mbus_type mbus_type; + u16 i2c_bus_num; + u16 flags; + u8 use_field; +}; + +struct s3c_camif_plat_data { + struct s3c_camif_sensor_info sensor; + int (*gpio_get)(void); + int (*gpio_put)(void); +}; + +/* Platform default helper functions */ +int s3c_camif_gpio_get(void); +int s3c_camif_gpio_put(void); + +#endif /* MEDIA_S3C_CAMIF_ */ diff --git a/include/media/s3c_fimc.h b/include/media/s3c_fimc.h deleted file mode 100644 index ca1b6738e4a..00000000000 --- a/include/media/s3c_fimc.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Samsung S5P SoC camera interface driver header - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd - * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef S3C_FIMC_H_ -#define S3C_FIMC_H_ - -enum cam_bus_type { - FIMC_ITU_601 = 1, - FIMC_ITU_656, - FIMC_MIPI_CSI2, - FIMC_LCD_WB, /* FIFO link from LCD mixer */ -}; - -#define FIMC_CLK_INV_PCLK (1 << 0) -#define FIMC_CLK_INV_VSYNC (1 << 1) -#define FIMC_CLK_INV_HREF (1 << 2) -#define FIMC_CLK_INV_HSYNC (1 << 3) - -struct i2c_board_info; - -/** - * struct s3c_fimc_isp_info - image sensor information required for host - * interace configuration. - * - * @board_info: pointer to I2C subdevice's board info - * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc. - * @i2c_bus_num: i2c control bus id the sensor is attached to - * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU) - * @bus_width: camera data bus width in bits - * @flags: flags defining bus signals polarity inversion (High by default) - */ -struct s3c_fimc_isp_info { - struct i2c_board_info *board_info; - enum cam_bus_type bus_type; - u16 i2c_bus_num; - u16 mux_id; - u16 bus_width; - u16 flags; -}; - - -#define FIMC_MAX_CAMIF_CLIENTS 2 - -/** - * struct s3c_platform_fimc - camera host interface platform data - * - * @isp_info: properties of camera sensor required for host interface setup - */ -struct s3c_platform_fimc { - struct s3c_fimc_isp_info *isp_info[FIMC_MAX_CAMIF_CLIENTS]; -}; -#endif /* S3C_FIMC_H_ */ diff --git a/include/media/s5c73m3.h b/include/media/s5c73m3.h new file mode 100644 index 00000000000..ccb9e544876 --- /dev/null +++ b/include/media/s5c73m3.h @@ -0,0 +1,55 @@ +/* + * Samsung LSI S5C73M3 8M pixel camera driver + * + * Copyright (C) 2012, Samsung Electronics, Co., Ltd. + * Sylwester Nawrocki <s.nawrocki@samsung.com> + * Andrzej Hajda <a.hajda@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef MEDIA_S5C73M3__ +#define MEDIA_S5C73M3__ + +#include <linux/videodev2.h> +#include <media/v4l2-mediabus.h> + +/** + * struct s5c73m3_gpio - data structure describing a GPIO + * @gpio: GPIO number + * @level: indicates active state of the @gpio + */ +struct s5c73m3_gpio { + int gpio; + int level; +}; + +/** + * struct s5c73m3_platform_data - s5c73m3 driver platform data + * @mclk_frequency: sensor's master clock frequency in Hz + * @gpio_reset: GPIO driving RESET pin + * @gpio_stby: GPIO driving STBY pin + * @nlanes: maximum number of MIPI-CSI lanes used + * @horiz_flip: default horizontal image flip value, non zero to enable + * @vert_flip: default vertical image flip value, non zero to enable + */ + +struct s5c73m3_platform_data { + unsigned long mclk_frequency; + + struct s5c73m3_gpio gpio_reset; + struct s5c73m3_gpio gpio_stby; + + enum v4l2_mbus_type bus_type; + u8 nlanes; + u8 horiz_flip; + u8 vert_flip; +}; + +#endif /* MEDIA_S5C73M3__ */ diff --git a/include/media/s5k4ecgx.h b/include/media/s5k4ecgx.h new file mode 100644 index 00000000000..90c1be792ff --- /dev/null +++ b/include/media/s5k4ecgx.h @@ -0,0 +1,37 @@ +/* + * S5K4ECGX image sensor header file + * + * Copyright (C) 2012, Linaro + * Copyright (C) 2012, Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5K4ECGX_H +#define S5K4ECGX_H + +/** + * struct s5k4ecgx_gpio - data structure describing a GPIO + * @gpio : GPIO number + * @level: indicates active state of the @gpio + */ +struct s5k4ecgx_gpio { + int gpio; + int level; +}; + +/** + * struct ss5k4ecgx_platform_data- s5k4ecgx driver platform data + * @gpio_reset: GPIO driving RESET pin + * @gpio_stby : GPIO driving STBY pin + */ + +struct s5k4ecgx_platform_data { + struct s5k4ecgx_gpio gpio_reset; + struct s5k4ecgx_gpio gpio_stby; +}; + +#endif /* S5K4ECGX_H */ diff --git a/include/media/s5k6aa.h b/include/media/s5k6aa.h new file mode 100644 index 00000000000..ba34f7055e5 --- /dev/null +++ b/include/media/s5k6aa.h @@ -0,0 +1,51 @@ +/* + * S5K6AAFX camera sensor driver header + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5K6AA_H +#define S5K6AA_H + +#include <media/v4l2-mediabus.h> + +/** + * struct s5k6aa_gpio - data structure describing a GPIO + * @gpio: GPIO number + * @level: indicates active state of the @gpio + */ +struct s5k6aa_gpio { + int gpio; + int level; +}; + +/** + * struct s5k6aa_platform_data - s5k6aa driver platform data + * @set_power: an additional callback to the board code, called + * after enabling the regulators and before switching + * the sensor off + * @mclk_frequency: sensor's master clock frequency in Hz + * @gpio_reset: GPIO driving RESET pin + * @gpio_stby: GPIO driving STBY pin + * @nlanes: maximum number of MIPI-CSI lanes used + * @horiz_flip: default horizontal image flip value, non zero to enable + * @vert_flip: default vertical image flip value, non zero to enable + */ + +struct s5k6aa_platform_data { + int (*set_power)(int enable); + unsigned long mclk_frequency; + struct s5k6aa_gpio gpio_reset; + struct s5k6aa_gpio gpio_stby; + enum v4l2_mbus_type bus_type; + u8 nlanes; + u8 horiz_flip; + u8 vert_flip; +}; + +#endif /* S5K6AA_H */ diff --git a/include/media/s5p_hdmi.h b/include/media/s5p_hdmi.h new file mode 100644 index 00000000000..181642b8d0a --- /dev/null +++ b/include/media/s5p_hdmi.h @@ -0,0 +1,37 @@ +/* + * Driver header for S5P HDMI chip. + * + * Copyright (c) 2011 Samsung Electronics, Co. Ltd + * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_HDMI_H +#define S5P_HDMI_H + +struct i2c_board_info; + +/** + * @hdmiphy_bus: controller id for HDMIPHY bus + * @hdmiphy_info: template for HDMIPHY I2C device + * @mhl_bus: controller id for MHL control bus + * @mhl_info: template for MHL I2C device + * @hpd_gpio: GPIO for Hot-Plug-Detect pin + * + * NULL pointer for *_info fields indicates that + * the corresponding chip is not present + */ +struct s5p_hdmi_platform_data { + int hdmiphy_bus; + struct i2c_board_info *hdmiphy_info; + int mhl_bus; + struct i2c_board_info *mhl_info; + int hpd_gpio; +}; + +#endif /* S5P_HDMI_H */ + diff --git a/include/media/saa6588.h b/include/media/saa6588.h index 2c3c4420a4e..b5ec1aa60ed 100644 --- a/include/media/saa6588.h +++ b/include/media/saa6588.h @@ -27,6 +27,7 @@ struct saa6588_command { unsigned int block_count; + bool nonblocking; int result; unsigned char __user *buffer; struct file *instance; @@ -34,7 +35,6 @@ struct saa6588_command { }; /* These ioctls are internal to the kernel */ -#define SAA6588_CMD_OPEN _IOW('R', 1, int) #define SAA6588_CMD_CLOSE _IOW('R', 2, int) #define SAA6588_CMD_READ _IOR('R', 3, int) #define SAA6588_CMD_POLL _IOR('R', 4, int) diff --git a/include/media/saa6752hs.h b/include/media/saa6752hs.h deleted file mode 100644 index 3b8686ead80..00000000000 --- a/include/media/saa6752hs.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - saa6752hs.h - definition for saa6752hs MPEG encoder - - Copyright (C) 2003 Andrew de Quincey <adq@lidskialf.net> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/include/media/saa7115.h b/include/media/saa7115.h index bab21271959..76911e71de1 100644 --- a/include/media/saa7115.h +++ b/include/media/saa7115.h @@ -21,6 +21,8 @@ #ifndef _SAA7115_H_ #define _SAA7115_H_ +/* s_routing inputs, outputs, and config */ + /* SAA7111/3/4/5 HW inputs */ #define SAA7115_COMPOSITE0 0 #define SAA7115_COMPOSITE1 1 @@ -33,24 +35,107 @@ #define SAA7115_SVIDEO2 8 #define SAA7115_SVIDEO3 9 -/* SAA7115 v4l2_crystal_freq frequency values */ -#define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */ -#define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */ - -/* SAA7115 v4l2_crystal_freq audio clock control flags */ -#define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */ -#define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ -#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ - +/* outputs */ #define SAA7115_IPORT_ON 1 #define SAA7115_IPORT_OFF 0 -/* SAA7111 specific output flags */ +/* SAA7111 specific outputs. */ #define SAA7111_VBI_BYPASS 2 #define SAA7111_FMT_YUV422 0x00 #define SAA7111_FMT_RGB 0x40 #define SAA7111_FMT_CCIR 0x80 #define SAA7111_FMT_YUV411 0xc0 +/* config flags */ +/* + * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit + * controls the IDQ signal polarity which is set to 'inverted' if the bit + * it 1 and to 'default' if it is 0. + */ +#define SAA7115_IDQ_IS_DEFAULT (1 << 0) + +/* s_crystal_freq values and flags */ + +/* SAA7115 v4l2_crystal_freq frequency values */ +#define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */ +#define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */ + +/* SAA7115 v4l2_crystal_freq audio clock control flags */ +#define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */ +#define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ +#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ +#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */ + +/* ===== SAA7113 Config enums ===== */ + +/* Register 0x08 "Horizontal time constant" [Bit 3..4]: + * Should be set to "Fast Locking Mode" according to the datasheet, + * and that is the default setting in the gm7113c_init table. + * saa7113_init sets this value to "VTR Mode". */ +enum saa7113_r08_htc { + SAA7113_HTC_TV_MODE = 0x00, + SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */ + SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */ +}; + +/* Register 0x10 "Output format selection" [Bit 6..7]: + * Defaults to ITU_656 as specified in datasheet. */ +enum saa7113_r10_ofts { + SAA7113_OFTS_ITU_656 = 0x0, /* Default */ + SAA7113_OFTS_VFLAG_BY_VREF, + SAA7113_OFTS_VFLAG_BY_DATA_TYPE +}; + +/* + * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]: + * This is used to select what data is output on the RTS0 and RTS1 pins. + * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0) + * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified + * in the datasheet, but is set to HREF_HS in the saa7113_init table. + */ +enum saa7113_r12_rts { + SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */ + SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */ + SAA7113_RTS_GPSW, + SAA7115_RTS_HL, + SAA7113_RTS_VL, + SAA7113_RTS_DL, + SAA7113_RTS_PLIN, + SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */ + SAA7113_RTS_HS, + SAA7113_RTS_HQ, + SAA7113_RTS_ODD, + SAA7113_RTS_VS, + SAA7113_RTS_V123, + SAA7113_RTS_VGATE, + SAA7113_RTS_VREF, + SAA7113_RTS_FID +}; + +/** + * struct saa7115_platform_data - Allow overriding default initialization + * + * @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table + * instead of saa7113_init table + * (saa7113 only) + * @saa7113_r08_htc: [R_08 - Bit 3..4] + * @saa7113_r10_vrln: [R_10 - Bit 3] + * default: Disabled for gm7113c_init + * Enabled for saa7113c_init + * @saa7113_r10_ofts: [R_10 - Bit 6..7] + * @saa7113_r12_rts0: [R_12 - Bit 0..3] + * @saa7113_r12_rts1: [R_12 - Bit 4..7] + * @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled + */ +struct saa7115_platform_data { + bool saa7113_force_gm7113c_init; + enum saa7113_r08_htc *saa7113_r08_htc; + bool *saa7113_r10_vrln; + enum saa7113_r10_ofts *saa7113_r10_ofts; + enum saa7113_r12_rts *saa7113_r12_rts0; + enum saa7113_r12_rts *saa7113_r12_rts1; + bool *saa7113_r13_adlsb; +}; + #endif diff --git a/include/media/saa7146.h b/include/media/saa7146.h index 79827143d5a..96058a5a4ac 100644 --- a/include/media/saa7146.h +++ b/include/media/saa7146.h @@ -1,7 +1,6 @@ #ifndef __SAA7146__ #define __SAA7146__ -#include <linux/module.h> /* for module-version */ #include <linux/delay.h> /* for delay-stuff */ #include <linux/slab.h> /* for kmalloc/kfree */ #include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */ @@ -14,39 +13,48 @@ #include <linux/mutex.h> #include <linux/scatterlist.h> #include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> #include <linux/vmalloc.h> /* for vmalloc() */ #include <linux/mm.h> /* for vmalloc_to_page() */ -#define SAA7146_VERSION_CODE 0x000600 /* 0.6.0 */ - #define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr))) #define saa7146_read(sxy,adr) readl(sxy->mem+(adr)) extern unsigned int saa7146_debug; -//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),KBUILD_MODNAME,__func__) - #ifndef DEBUG_VARIABLE #define DEBUG_VARIABLE saa7146_debug #endif -#define DEBUG_PROLOG printk("%s: %s(): ",KBUILD_MODNAME, __func__) -#define INFO(x) { printk("%s: ",KBUILD_MODNAME); printk x; } - -#define ERR(x) { DEBUG_PROLOG; printk x; } - -#define DEB_S(x) if (0!=(DEBUG_VARIABLE&0x01)) { DEBUG_PROLOG; printk x; } /* simple debug messages */ -#define DEB_D(x) if (0!=(DEBUG_VARIABLE&0x02)) { DEBUG_PROLOG; printk x; } /* more detailed debug messages */ -#define DEB_EE(x) if (0!=(DEBUG_VARIABLE&0x04)) { DEBUG_PROLOG; printk x; } /* print enter and exit of functions */ -#define DEB_I2C(x) if (0!=(DEBUG_VARIABLE&0x08)) { DEBUG_PROLOG; printk x; } /* i2c debug messages */ -#define DEB_VBI(x) if (0!=(DEBUG_VARIABLE&0x10)) { DEBUG_PROLOG; printk x; } /* vbi debug messages */ -#define DEB_INT(x) if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */ -#define DEB_CAP(x) if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */ +#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__) + +#define _DBG(mask, fmt, ...) \ +do { \ + if (DEBUG_VARIABLE & mask) \ + pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \ +} while (0) + +/* simple debug messages */ +#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__) +/* more detailed debug messages */ +#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__) +/* print enter and exit of functions */ +#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__) +/* i2c debug messages */ +#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__) +/* vbi debug messages */ +#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__) +/* interrupt debug messages */ +#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__) +/* capture debug messages */ +#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__) #define SAA7146_ISR_CLEAR(x,y) \ saa7146_write(x, ISR, (y)); +struct module; + struct saa7146_dev; struct saa7146_extension; struct saa7146_vv; @@ -109,9 +117,8 @@ struct saa7146_dev { struct module *module; - struct list_head item; - struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl_handler; /* different device locks */ spinlock_t slock; @@ -157,8 +164,6 @@ static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev) int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate); /* from saa7146_core.c */ -extern struct list_head saa7146_devices; -extern struct mutex saa7146_devices_lock; int saa7146_register_extension(struct saa7146_extension*); int saa7146_unregister_extension(struct saa7146_extension*); struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc); diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h index 4aeff96ff7d..944ecdf3530 100644 --- a/include/media/saa7146_vv.h +++ b/include/media/saa7146_vv.h @@ -3,6 +3,7 @@ #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-fh.h> #include <media/saa7146.h> #include <media/videobuf-dma-sg.h> @@ -84,21 +85,15 @@ struct saa7146_overlay { /* per open data */ struct saa7146_fh { + /* Must be the first field! */ + struct v4l2_fh fh; struct saa7146_dev *dev; - /* if this is a vbi or capture open */ - enum v4l2_buf_type type; - - /* video overlay */ - struct saa7146_overlay ov; /* video capture */ struct videobuf_queue video_q; - struct v4l2_pix_format video_fmt; /* vbi capture */ struct videobuf_queue vbi_q; - struct v4l2_vbi_format vbi_fmt; - struct timer_list vbi_read_timeout; unsigned int resources; /* resource management for device open */ }; @@ -109,7 +104,9 @@ struct saa7146_fh { struct saa7146_vv { /* vbi capture */ - struct saa7146_dmaqueue vbi_q; + struct saa7146_dmaqueue vbi_dmaq; + struct v4l2_vbi_format vbi_fmt; + struct timer_list vbi_read_timeout; /* vbi workaround interrupt queue */ wait_queue_head_t vbi_wq; int vbi_fieldcount; @@ -119,13 +116,14 @@ struct saa7146_vv struct saa7146_fh *video_fh; /* video overlay */ + struct saa7146_overlay ov; struct v4l2_framebuffer ov_fb; struct saa7146_format *ov_fmt; - struct saa7146_overlay *ov_data; struct saa7146_fh *ov_suspend; /* video capture */ - struct saa7146_dmaqueue video_q; + struct saa7146_dmaqueue video_dmaq; + struct v4l2_pix_format video_fmt; enum v4l2_field last_field; /* common: fixme? shouldn't this be in saa7146_fh? @@ -163,7 +161,8 @@ struct saa7146_ext_vv int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *); /* the extension can override this */ - struct v4l2_ioctl_ops ops; + struct v4l2_ioctl_ops vid_ops; + struct v4l2_ioctl_ops vbi_ops; /* pointer to the saa7146 core ops */ const struct v4l2_ioctl_ops *core_ops; @@ -202,10 +201,12 @@ void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data); /* from saa7146_video.c */ extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops; +extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops; extern struct saa7146_use_ops saa7146_video_uops; int saa7146_start_preview(struct saa7146_fh *fh); int saa7146_stop_preview(struct saa7146_fh *fh); long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg); +int saa7146_s_ctrl(struct v4l2_ctrl *ctrl); /* from saa7146_vbi.c */ extern struct saa7146_use_ops saa7146_vbi_uops; diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h index 80346a6d28a..7f57056c22b 100644 --- a/include/media/sh_mobile_ceu.h +++ b/include/media/sh_mobile_ceu.h @@ -5,12 +5,25 @@ #define SH_CEU_FLAG_USE_16BIT_BUS (1 << 1) /* use 16bit bus width */ #define SH_CEU_FLAG_HSYNC_LOW (1 << 2) /* default High if possible */ #define SH_CEU_FLAG_VSYNC_LOW (1 << 3) /* default High if possible */ +#define SH_CEU_FLAG_LOWER_8BIT (1 << 4) /* default upper 8bit */ struct device; +struct resource; + +struct sh_mobile_ceu_companion { + u32 num_resources; + struct resource *resource; + int id; + void *platform_data; +}; struct sh_mobile_ceu_info { unsigned long flags; - struct device *csi2_dev; + int max_width; + int max_height; + struct sh_mobile_ceu_companion *csi2; + struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ + unsigned int *asd_sizes; /* 0-terminated array pf asd group sizes */ }; #endif /* __ASM_SH_MOBILE_CEU_H__ */ diff --git a/include/media/sh_mobile_csi2.h b/include/media/sh_mobile_csi2.h index 4d261517446..14030db51f1 100644 --- a/include/media/sh_mobile_csi2.h +++ b/include/media/sh_mobile_csi2.h @@ -11,6 +11,8 @@ #ifndef SH_MIPI_CSI #define SH_MIPI_CSI +#include <linux/list.h> + enum sh_csi2_phy { SH_CSI2_PHY_MAIN, SH_CSI2_PHY_SUB, @@ -31,8 +33,11 @@ struct sh_csi2_client_config { unsigned char lanes; /* bitmask[3:0] */ unsigned char channel; /* 0..3 */ struct platform_device *pdev; /* client platform device */ + const char *name; /* async matching: client name */ }; +struct v4l2_device; + struct sh_csi2_pdata { enum sh_csi2_type type; unsigned int flags; @@ -40,7 +45,4 @@ struct sh_csi2_pdata { int num_clients; }; -struct device; -struct v4l2_device; - #endif diff --git a/include/media/si4713.h b/include/media/si4713.h index ed7353e8a98..f98a0a7af61 100644 --- a/include/media/si4713.h +++ b/include/media/si4713.h @@ -23,6 +23,8 @@ * Platform dependent definition */ struct si4713_platform_data { + const char * const *supply_names; + unsigned supplies; int gpio_reset; /* < 0 if not used */ }; diff --git a/include/media/si476x.h b/include/media/si476x.h new file mode 100644 index 00000000000..e02e241e2d2 --- /dev/null +++ b/include/media/si476x.h @@ -0,0 +1,37 @@ +/* + * include/media/si476x.h -- Common definitions for si476x driver + * + * Copyright (C) 2012 Innovative Converged Devices(ICD) + * Copyright (C) 2013 Andrey Smirnov + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#ifndef SI476X_H +#define SI476X_H + +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <linux/mfd/si476x-reports.h> + +enum si476x_ctrl_id { + V4L2_CID_SI476X_RSSI_THRESHOLD = (V4L2_CID_USER_SI476X_BASE + 1), + V4L2_CID_SI476X_SNR_THRESHOLD = (V4L2_CID_USER_SI476X_BASE + 2), + V4L2_CID_SI476X_MAX_TUNE_ERROR = (V4L2_CID_USER_SI476X_BASE + 3), + V4L2_CID_SI476X_HARMONICS_COUNT = (V4L2_CID_USER_SI476X_BASE + 4), + V4L2_CID_SI476X_DIVERSITY_MODE = (V4L2_CID_USER_SI476X_BASE + 5), + V4L2_CID_SI476X_INTERCHIP_LINK = (V4L2_CID_USER_SI476X_BASE + 6), +}; + +#endif /* SI476X_H*/ diff --git a/include/media/sii9234.h b/include/media/sii9234.h new file mode 100644 index 00000000000..6a4a809fe9a --- /dev/null +++ b/include/media/sii9234.h @@ -0,0 +1,24 @@ +/* + * Driver header for SII9234 MHL converter chip. + * + * Copyright (c) 2011 Samsung Electronics, Co. Ltd + * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef SII9234_H +#define SII9234_H + +/** + * @gpio_n_reset: GPIO driving nRESET pin + */ + +struct sii9234_platform_data { + int gpio_n_reset; +}; + +#endif /* SII9234_H */ diff --git a/include/media/smiapp.h b/include/media/smiapp.h new file mode 100644 index 00000000000..0b8f124a630 --- /dev/null +++ b/include/media/smiapp.h @@ -0,0 +1,83 @@ +/* + * include/media/smiapp.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __SMIAPP_H_ +#define __SMIAPP_H_ + +#include <media/v4l2-subdev.h> + +#define SMIAPP_NAME "smiapp" + +#define SMIAPP_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */ +#define SMIAPP_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */ + +#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK 0 +#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE 1 +#define SMIAPP_CSI_SIGNALLING_MODE_CSI2 2 + +#define SMIAPP_NO_XSHUTDOWN -1 + +/* + * Sometimes due to board layout considerations the camera module can be + * mounted rotated. The typical rotation used is 180 degrees which can be + * corrected by giving a default H-FLIP and V-FLIP in the sensor readout. + * FIXME: rotation also changes the bayer pattern. + */ +enum smiapp_module_board_orient { + SMIAPP_MODULE_BOARD_ORIENT_0 = 0, + SMIAPP_MODULE_BOARD_ORIENT_180, +}; + +struct smiapp_flash_strobe_parms { + u8 mode; + u32 strobe_width_high_us; + u16 strobe_delay; + u16 stobe_start_point; + u8 trigger; +}; + +struct smiapp_platform_data { + /* + * Change the cci address if i2c_addr_alt is set. + * Both default and alternate cci addr need to be present + */ + unsigned short i2c_addr_dfl; /* Default i2c addr */ + unsigned short i2c_addr_alt; /* Alternate i2c addr */ + + unsigned int nvm_size; /* bytes */ + unsigned int ext_clk; /* sensor external clk */ + + unsigned int lanes; /* Number of CSI-2 lanes */ + u8 csi_signalling_mode; /* SMIAPP_CSI_SIGNALLING_MODE_* */ + const s64 *op_sys_clock; + + enum smiapp_module_board_orient module_board_orient; + + struct smiapp_flash_strobe_parms *strobe_setup; + + int (*set_xclk)(struct v4l2_subdev *sd, int hz); + int xshutdown; /* gpio or SMIAPP_NO_XSHUTDOWN */ +}; + +#endif /* __SMIAPP_H_ */ diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 9386db829fb..865246b0012 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -12,56 +12,90 @@ #ifndef SOC_CAMERA_H #define SOC_CAMERA_H +#include <linux/bitops.h> #include <linux/device.h> #include <linux/mutex.h> #include <linux/pm.h> #include <linux/videodev2.h> #include <media/videobuf-core.h> +#include <media/videobuf2-core.h> +#include <media/v4l2-async.h> +#include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> -extern struct bus_type soc_camera_bus_type; - struct file; +struct soc_camera_desc; +struct soc_camera_async_client; struct soc_camera_device { - struct list_head list; - struct device dev; + struct list_head list; /* list of all registered devices */ + struct soc_camera_desc *sdesc; struct device *pdev; /* Platform device */ + struct device *parent; /* Camera host device */ + struct device *control; /* E.g., the i2c client */ s32 user_width; s32 user_height; + u32 bytesperline; /* for padding, zero if unused */ + u32 sizeimage; enum v4l2_colorspace colorspace; unsigned char iface; /* Host number */ unsigned char devnum; /* Device number per host */ struct soc_camera_sense *sense; /* See comment in struct definition */ - struct soc_camera_ops *ops; struct video_device *vdev; + struct v4l2_ctrl_handler ctrl_handler; const struct soc_camera_format_xlate *current_fmt; struct soc_camera_format_xlate *user_formats; int num_user_formats; enum v4l2_field field; /* Preserve field over close() */ void *host_priv; /* Per-device host private data */ - /* soc_camera.c private count. Only accessed with .video_lock held */ + /* soc_camera.c private count. Only accessed with .host_lock held */ int use_count; - struct mutex video_lock; /* Protects device data */ struct file *streamer; /* stream owner */ - struct videobuf_queue vb_vidq; + struct v4l2_clk *clk; + /* Asynchronous subdevice management */ + struct soc_camera_async_client *sasc; + /* video buffer queue */ + union { + struct videobuf_queue vb_vidq; + struct vb2_queue vb2_vidq; + }; +}; + +/* Host supports programmable stride */ +#define SOCAM_HOST_CAP_STRIDE (1 << 0) + +enum soc_camera_subdev_role { + SOCAM_SUBDEV_DATA_SOURCE = 1, + SOCAM_SUBDEV_DATA_SINK, + SOCAM_SUBDEV_DATA_PROCESSOR, +}; + +struct soc_camera_async_subdev { + struct v4l2_async_subdev asd; + enum soc_camera_subdev_role role; }; struct soc_camera_host { struct v4l2_device v4l2_dev; struct list_head list; - unsigned char nr; /* Host number */ + struct mutex host_lock; /* Main synchronisation lock */ + struct mutex clk_lock; /* Protect pipeline modifications */ + unsigned char nr; /* Host number */ + u32 capabilities; + struct soc_camera_device *icd; /* Currently attached client */ void *priv; const char *drv_name; struct soc_camera_host_ops *ops; + struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ + unsigned int *asd_sizes; /* 0-terminated array of asd group sizes */ }; struct soc_camera_host_ops { struct module *owner; int (*add)(struct soc_camera_device *); void (*remove)(struct soc_camera_device *); - int (*suspend)(struct soc_camera_device *, pm_message_t); - int (*resume)(struct soc_camera_device *); + int (*clock_start)(struct soc_camera_host *); + void (*clock_stop)(struct soc_camera_host *); /* * .get_formats() is called for each client device format, but * .put_formats() is only called once. Further, if any of the calls to @@ -73,21 +107,27 @@ struct soc_camera_host_ops { void (*put_formats)(struct soc_camera_device *); int (*cropcap)(struct soc_camera_device *, struct v4l2_cropcap *); int (*get_crop)(struct soc_camera_device *, struct v4l2_crop *); - int (*set_crop)(struct soc_camera_device *, struct v4l2_crop *); + int (*set_crop)(struct soc_camera_device *, const struct v4l2_crop *); + int (*get_selection)(struct soc_camera_device *, struct v4l2_selection *); + int (*set_selection)(struct soc_camera_device *, struct v4l2_selection *); + /* + * The difference to .set_crop() is, that .set_livecrop is not allowed + * to change the output sizes + */ + int (*set_livecrop)(struct soc_camera_device *, const struct v4l2_crop *); int (*set_fmt)(struct soc_camera_device *, struct v4l2_format *); int (*try_fmt)(struct soc_camera_device *, struct v4l2_format *); void (*init_videobuf)(struct videobuf_queue *, struct soc_camera_device *); + int (*init_videobuf2)(struct vb2_queue *, + struct soc_camera_device *); int (*reqbufs)(struct soc_camera_device *, struct v4l2_requestbuffers *); int (*querycap)(struct soc_camera_host *, struct v4l2_capability *); - int (*set_bus_param)(struct soc_camera_device *, __u32); - int (*get_ctrl)(struct soc_camera_device *, struct v4l2_control *); - int (*set_ctrl)(struct soc_camera_device *, struct v4l2_control *); + int (*set_bus_param)(struct soc_camera_device *); int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *); int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *); + int (*enum_framesizes)(struct soc_camera_device *, struct v4l2_frmsizeenum *); unsigned int (*poll)(struct file *, poll_table *); - const struct v4l2_queryctrl *controls; - int num_controls; }; #define SOCAM_SENSOR_INVERT_PCLK (1 << 0) @@ -99,26 +139,82 @@ struct soc_camera_host_ops { struct i2c_board_info; struct regulator_bulk_data; -struct soc_camera_link { - /* Camera bus id, used to match a camera and a bus */ - int bus_id; +struct soc_camera_subdev_desc { /* Per camera SOCAM_SENSOR_* bus flags */ unsigned long flags; + + /* sensor driver private platform data */ + void *drv_priv; + + /* + * Set unbalanced_power to true to deal with legacy drivers, failing to + * balance their calls to subdevice's .s_power() method. clock_state is + * then used internally by helper functions, it shouldn't be touched by + * drivers or the platform code. + */ + bool unbalanced_power; + unsigned long clock_state; + + /* Optional callbacks to power on or off and reset the sensor */ + int (*power)(struct device *, int); + int (*reset)(struct device *); + + /* + * some platforms may support different data widths than the sensors + * native ones due to different data line routing. Let the board code + * overwrite the width flags. + */ + int (*set_bus_param)(struct soc_camera_subdev_desc *, unsigned long flags); + unsigned long (*query_bus_param)(struct soc_camera_subdev_desc *); + void (*free_bus)(struct soc_camera_subdev_desc *); + + /* Optional regulators that have to be managed on power on/off events */ + struct v4l2_subdev_platform_data sd_pdata; +}; + +struct soc_camera_host_desc { + /* Camera bus id, used to match a camera and a bus */ + int bus_id; int i2c_adapter_id; struct i2c_board_info *board_info; const char *module_name; - void *priv; - /* Optional regulators that have to be managed on power on/off events */ - struct regulator_bulk_data *regulators; - int num_regulators; + /* + * For non-I2C devices platform has to provide methods to add a device + * to the system and to remove it + */ + int (*add_device)(struct soc_camera_device *); + void (*del_device)(struct soc_camera_device *); +}; +/* + * Platform data for "soc-camera-pdrv" + * This MUST be kept binary-identical to struct soc_camera_link below, until + * it is completely replaced by this one, after which we can split it into its + * two components. + */ +struct soc_camera_desc { + struct soc_camera_subdev_desc subdev_desc; + struct soc_camera_host_desc host_desc; +}; + +/* Prepare to replace this struct: don't change its layout any more! */ +struct soc_camera_link { /* - * For non-I2C devices platform platform has to provide methods to - * add a device to the system and to remove + * Subdevice part - keep at top and compatible to + * struct soc_camera_subdev_desc */ - int (*add_device)(struct soc_camera_link *, struct device *); - void (*del_device)(struct soc_camera_link *); + + /* Per camera SOCAM_SENSOR_* bus flags */ + unsigned long flags; + + void *priv; + + /* Set by platforms to handle misbehaving drivers */ + bool unbalanced_power; + /* Used by soc-camera helper functions */ + unsigned long clock_state; + /* Optional callbacks to power on or off and reset the sensor */ int (*power)(struct device *, int); int (*reset)(struct device *); @@ -130,13 +226,31 @@ struct soc_camera_link { int (*set_bus_param)(struct soc_camera_link *, unsigned long flags); unsigned long (*query_bus_param)(struct soc_camera_link *); void (*free_bus)(struct soc_camera_link *); -}; -static inline struct soc_camera_device *to_soc_camera_dev( - const struct device *dev) -{ - return container_of(dev, struct soc_camera_device, dev); -} + /* Optional regulators that have to be managed on power on/off events */ + struct regulator_bulk_data *regulators; + int num_regulators; + + void *host_priv; + + /* + * Host part - keep at bottom and compatible to + * struct soc_camera_host_desc + */ + + /* Camera bus id, used to match a camera and a bus */ + int bus_id; + int i2c_adapter_id; + struct i2c_board_info *board_info; + const char *module_name; + + /* + * For non-I2C devices platform has to provide methods to add a device + * to the system and to remove it + */ + int (*add_device)(struct soc_camera_device *); + void (*del_device)(struct soc_camera_device *); +}; static inline struct soc_camera_host *to_soc_camera_host( const struct device *dev) @@ -146,16 +260,16 @@ static inline struct soc_camera_host *to_soc_camera_host( return container_of(v4l2_dev, struct soc_camera_host, v4l2_dev); } -static inline struct soc_camera_link *to_soc_camera_link( +static inline struct soc_camera_desc *to_soc_camera_desc( const struct soc_camera_device *icd) { - return icd->dev.platform_data; + return icd->sdesc; } static inline struct device *to_soc_camera_control( const struct soc_camera_device *icd) { - return dev_get_drvdata(&icd->dev); + return icd->control; } static inline struct v4l2_subdev *soc_camera_to_subdev( @@ -186,16 +300,6 @@ struct soc_camera_format_xlate { const struct soc_mbus_pixelfmt *host_fmt; }; -struct soc_camera_ops { - int (*suspend)(struct soc_camera_device *, pm_message_t state); - int (*resume)(struct soc_camera_device *); - unsigned long (*query_bus_param)(struct soc_camera_device *); - int (*set_bus_param)(struct soc_camera_device *, unsigned long); - int (*enum_input)(struct soc_camera_device *, struct v4l2_input *); - const struct v4l2_queryctrl *controls; - int num_controls; -}; - #define SOCAM_SENSE_PCLK_CHANGED (1 << 0) /** @@ -222,56 +326,22 @@ struct soc_camera_sense { unsigned long pixel_clock; }; -static inline struct v4l2_queryctrl const *soc_camera_find_qctrl( - struct soc_camera_ops *ops, int id) -{ - int i; - - for (i = 0; i < ops->num_controls; i++) - if (ops->controls[i].id == id) - return &ops->controls[i]; - - return NULL; -} - -#define SOCAM_MASTER (1 << 0) -#define SOCAM_SLAVE (1 << 1) -#define SOCAM_HSYNC_ACTIVE_HIGH (1 << 2) -#define SOCAM_HSYNC_ACTIVE_LOW (1 << 3) -#define SOCAM_VSYNC_ACTIVE_HIGH (1 << 4) -#define SOCAM_VSYNC_ACTIVE_LOW (1 << 5) -#define SOCAM_DATAWIDTH_4 (1 << 6) -#define SOCAM_DATAWIDTH_8 (1 << 7) -#define SOCAM_DATAWIDTH_9 (1 << 8) -#define SOCAM_DATAWIDTH_10 (1 << 9) -#define SOCAM_DATAWIDTH_15 (1 << 10) -#define SOCAM_DATAWIDTH_16 (1 << 11) -#define SOCAM_PCLK_SAMPLE_RISING (1 << 12) -#define SOCAM_PCLK_SAMPLE_FALLING (1 << 13) -#define SOCAM_DATA_ACTIVE_HIGH (1 << 14) -#define SOCAM_DATA_ACTIVE_LOW (1 << 15) +#define SOCAM_DATAWIDTH(x) BIT((x) - 1) +#define SOCAM_DATAWIDTH_4 SOCAM_DATAWIDTH(4) +#define SOCAM_DATAWIDTH_8 SOCAM_DATAWIDTH(8) +#define SOCAM_DATAWIDTH_9 SOCAM_DATAWIDTH(9) +#define SOCAM_DATAWIDTH_10 SOCAM_DATAWIDTH(10) +#define SOCAM_DATAWIDTH_12 SOCAM_DATAWIDTH(12) +#define SOCAM_DATAWIDTH_15 SOCAM_DATAWIDTH(15) +#define SOCAM_DATAWIDTH_16 SOCAM_DATAWIDTH(16) +#define SOCAM_DATAWIDTH_18 SOCAM_DATAWIDTH(18) +#define SOCAM_DATAWIDTH_24 SOCAM_DATAWIDTH(24) #define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \ SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \ - SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_16) - -static inline unsigned long soc_camera_bus_param_compatible( - unsigned long camera_flags, unsigned long bus_flags) -{ - unsigned long common_flags, hsync, vsync, pclk, data, buswidth, mode; - - common_flags = camera_flags & bus_flags; - - hsync = common_flags & (SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW); - vsync = common_flags & (SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW); - pclk = common_flags & (SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING); - data = common_flags & (SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW); - mode = common_flags & (SOCAM_MASTER | SOCAM_SLAVE); - buswidth = common_flags & SOCAM_DATAWIDTH_MASK; - - return (!hsync || !vsync || !pclk || !data || !mode || !buswidth) ? 0 : - common_flags; -} + SOCAM_DATAWIDTH_12 | SOCAM_DATAWIDTH_15 | \ + SOCAM_DATAWIDTH_16 | SOCAM_DATAWIDTH_18 | \ + SOCAM_DATAWIDTH_24) static inline void soc_camera_limit_side(int *start, int *length, unsigned int start_min, @@ -288,15 +358,58 @@ static inline void soc_camera_limit_side(int *start, int *length, *start = start_min + length_max - *length; } -extern unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl, - unsigned long flags); +unsigned long soc_camera_apply_board_flags(struct soc_camera_subdev_desc *ssdd, + const struct v4l2_mbus_config *cfg); + +int soc_camera_power_init(struct device *dev, struct soc_camera_subdev_desc *ssdd); +int soc_camera_power_on(struct device *dev, struct soc_camera_subdev_desc *ssdd, + struct v4l2_clk *clk); +int soc_camera_power_off(struct device *dev, struct soc_camera_subdev_desc *ssdd, + struct v4l2_clk *clk); + +static inline int soc_camera_set_power(struct device *dev, + struct soc_camera_subdev_desc *ssdd, struct v4l2_clk *clk, bool on) +{ + return on ? soc_camera_power_on(dev, ssdd, clk) + : soc_camera_power_off(dev, ssdd, clk); +} /* This is only temporary here - until v4l2-subdev begins to link to video_device */ #include <linux/i2c.h> -static inline struct video_device *soc_camera_i2c_to_vdev(struct i2c_client *client) +static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd); + return icd ? icd->vdev : NULL; +} + +static inline struct soc_camera_subdev_desc *soc_camera_i2c_to_desc(const struct i2c_client *client) { - struct soc_camera_device *icd = client->dev.platform_data; - return icd->vdev; + return client->dev.platform_data; } +static inline struct v4l2_subdev *soc_camera_vdev_to_subdev(struct video_device *vdev) +{ + struct soc_camera_device *icd = video_get_drvdata(vdev); + return soc_camera_to_subdev(icd); +} + +static inline struct soc_camera_device *soc_camera_from_vb2q(const struct vb2_queue *vq) +{ + return container_of(vq, struct soc_camera_device, vb2_vidq); +} + +static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobuf_queue *vq) +{ + return container_of(vq, struct soc_camera_device, vb_vidq); +} + +static inline u32 soc_camera_grp_id(const struct soc_camera_device *icd) +{ + return (icd->iface << 8) | (icd->devnum + 1); +} + +void soc_camera_lock(struct vb2_queue *vq); +void soc_camera_unlock(struct vb2_queue *vq); + #endif diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h index 0ecefe227b7..1e5065dab43 100644 --- a/include/media/soc_camera_platform.h +++ b/include/media/soc_camera_platform.h @@ -13,6 +13,7 @@ #include <linux/videodev2.h> #include <media/soc_camera.h> +#include <media/v4l2-mediabus.h> struct device; @@ -20,9 +21,63 @@ struct soc_camera_platform_info { const char *format_name; unsigned long format_depth; struct v4l2_mbus_framefmt format; - unsigned long bus_param; - struct device *dev; + unsigned long mbus_param; + enum v4l2_mbus_type mbus_type; + struct soc_camera_device *icd; int (*set_capture)(struct soc_camera_platform_info *info, int enable); }; +static inline void soc_camera_platform_release(struct platform_device **pdev) +{ + *pdev = NULL; +} + +static inline int soc_camera_platform_add(struct soc_camera_device *icd, + struct platform_device **pdev, + struct soc_camera_link *plink, + void (*release)(struct device *dev), + int id) +{ + struct soc_camera_subdev_desc *ssdd = + (struct soc_camera_subdev_desc *)plink; + struct soc_camera_platform_info *info = ssdd->drv_priv; + int ret; + + if (&icd->sdesc->subdev_desc != ssdd) + return -ENODEV; + + if (*pdev) + return -EBUSY; + + *pdev = platform_device_alloc("soc_camera_platform", id); + if (!*pdev) + return -ENOMEM; + + info->icd = icd; + + (*pdev)->dev.platform_data = info; + (*pdev)->dev.release = release; + + ret = platform_device_add(*pdev); + if (ret < 0) { + platform_device_put(*pdev); + *pdev = NULL; + info->icd = NULL; + } + + return ret; +} + +static inline void soc_camera_platform_del(const struct soc_camera_device *icd, + struct platform_device *pdev, + const struct soc_camera_link *plink) +{ + const struct soc_camera_subdev_desc *ssdd = + (const struct soc_camera_subdev_desc *)plink; + if (&icd->sdesc->subdev_desc != ssdd || !pdev) + return; + + platform_device_unregister(pdev); +} + #endif /* __SOC_CAMERA_H__ */ diff --git a/include/media/soc_mediabus.h b/include/media/soc_mediabus.h index 037cd7be001..d33f6d05969 100644 --- a/include/media/soc_mediabus.h +++ b/include/media/soc_mediabus.h @@ -12,23 +12,31 @@ #define SOC_MEDIABUS_H #include <linux/videodev2.h> - -#include <media/v4l2-mediabus.h> +#include <linux/v4l2-mediabus.h> /** * enum soc_mbus_packing - data packing types on the media-bus - * @SOC_MBUS_PACKING_NONE: no packing, bit-for-bit transfer to RAM + * @SOC_MBUS_PACKING_NONE: no packing, bit-for-bit transfer to RAM, one + * sample represents one pixel * @SOC_MBUS_PACKING_2X8_PADHI: 16 bits transferred in 2 8-bit samples, in the * possibly incomplete byte high bits are padding * @SOC_MBUS_PACKING_2X8_PADLO: as above, but low bits are padding * @SOC_MBUS_PACKING_EXTEND16: sample width (e.g., 10 bits) has to be extended * to 16 bits + * @SOC_MBUS_PACKING_VARIABLE: compressed formats with variable packing + * @SOC_MBUS_PACKING_1_5X8: used for packed YUV 4:2:0 formats, where 4 + * pixels occupy 6 bytes in RAM + * @SOC_MBUS_PACKING_EXTEND32: sample width (e.g., 24 bits) has to be extended + * to 32 bits */ enum soc_mbus_packing { SOC_MBUS_PACKING_NONE, SOC_MBUS_PACKING_2X8_PADHI, SOC_MBUS_PACKING_2X8_PADLO, SOC_MBUS_PACKING_EXTEND16, + SOC_MBUS_PACKING_VARIABLE, + SOC_MBUS_PACKING_1_5X8, + SOC_MBUS_PACKING_EXTEND32, }; /** @@ -42,6 +50,24 @@ enum soc_mbus_order { }; /** + * enum soc_mbus_layout - planes layout in memory + * @SOC_MBUS_LAYOUT_PACKED: color components packed + * @SOC_MBUS_LAYOUT_PLANAR_2Y_U_V: YUV components stored in 3 planes (4:2:2) + * @SOC_MBUS_LAYOUT_PLANAR_2Y_C: YUV components stored in a luma and a + * chroma plane (C plane is half the size + * of Y plane) + * @SOC_MBUS_LAYOUT_PLANAR_Y_C: YUV components stored in a luma and a + * chroma plane (C plane is the same size + * as Y plane) + */ +enum soc_mbus_layout { + SOC_MBUS_LAYOUT_PACKED = 0, + SOC_MBUS_LAYOUT_PLANAR_2Y_U_V, + SOC_MBUS_LAYOUT_PLANAR_2Y_C, + SOC_MBUS_LAYOUT_PLANAR_Y_C, +}; + +/** * struct soc_mbus_pixelfmt - Data format on the media bus * @name: Name of the format * @fourcc: Fourcc code, that will be obtained if the data is @@ -55,11 +81,32 @@ struct soc_mbus_pixelfmt { u32 fourcc; enum soc_mbus_packing packing; enum soc_mbus_order order; + enum soc_mbus_layout layout; u8 bits_per_sample; }; +/** + * struct soc_mbus_lookup - Lookup FOURCC IDs by mediabus codes for pass-through + * @code: mediabus pixel-code + * @fmt: pixel format description + */ +struct soc_mbus_lookup { + enum v4l2_mbus_pixelcode code; + struct soc_mbus_pixelfmt fmt; +}; + +const struct soc_mbus_pixelfmt *soc_mbus_find_fmtdesc( + enum v4l2_mbus_pixelcode code, + const struct soc_mbus_lookup *lookup, + int n); const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc( enum v4l2_mbus_pixelcode code); s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf); +s32 soc_mbus_image_size(const struct soc_mbus_pixelfmt *mf, + u32 bytes_per_line, u32 height); +int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf, + unsigned int *numerator, unsigned int *denominator); +unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg, + unsigned int flags); #endif diff --git a/include/media/tea575x.h b/include/media/tea575x.h new file mode 100644 index 00000000000..2d4fa59db90 --- /dev/null +++ b/include/media/tea575x.h @@ -0,0 +1,79 @@ +#ifndef __SOUND_TEA575X_TUNER_H +#define __SOUND_TEA575X_TUNER_H + +/* + * ALSA driver for TEA5757/5759 Philips AM/FM tuner chips + * + * Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-device.h> + +#define TEA575X_FMIF 10700 +#define TEA575X_AMIF 450 + +#define TEA575X_DATA (1 << 0) +#define TEA575X_CLK (1 << 1) +#define TEA575X_WREN (1 << 2) +#define TEA575X_MOST (1 << 3) + +struct snd_tea575x; + +struct snd_tea575x_ops { + /* Drivers using snd_tea575x must either define read_ and write_val */ + void (*write_val)(struct snd_tea575x *tea, u32 val); + u32 (*read_val)(struct snd_tea575x *tea); + /* Or define the 3 pin functions */ + void (*set_pins)(struct snd_tea575x *tea, u8 pins); + u8 (*get_pins)(struct snd_tea575x *tea); + void (*set_direction)(struct snd_tea575x *tea, bool output); +}; + +struct snd_tea575x { + struct v4l2_device *v4l2_dev; + struct v4l2_file_operations fops; + struct video_device vd; /* video device */ + int radio_nr; /* radio_nr */ + bool tea5759; /* 5759 chip is present */ + bool has_am; /* Device can tune to AM freqs */ + bool cannot_read_data; /* Device cannot read the data pin */ + bool cannot_mute; /* Device cannot mute */ + bool mute; /* Device is muted? */ + bool stereo; /* receiving stereo */ + bool tuned; /* tuned to a station */ + unsigned int val; /* hw value */ + u32 band; /* 0: FM, 1: FM-Japan, 2: AM */ + u32 freq; /* frequency */ + struct mutex mutex; + struct snd_tea575x_ops *ops; + void *private_data; + u8 card[32]; + u8 bus_info[32]; + struct v4l2_ctrl_handler ctrl_handler; + int (*ext_init)(struct snd_tea575x *tea); +}; + +int snd_tea575x_hw_init(struct snd_tea575x *tea); +int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner); +void snd_tea575x_exit(struct snd_tea575x *tea); +void snd_tea575x_set_freq(struct snd_tea575x *tea); + +#endif /* __SOUND_TEA575X_TUNER_H */ diff --git a/include/media/ths7303.h b/include/media/ths7303.h new file mode 100644 index 00000000000..a7b49297da8 --- /dev/null +++ b/include/media/ths7303.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2013 Texas Instruments Inc + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. + * + * Contributors: + * Hans Verkuil <hans.verkuil@cisco.com> + * Lad, Prabhakar <prabhakar.lad@ti.com> + * Martin Bugge <marbugge@cisco.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef THS7353_H +#define THS7353_H + +/** + * struct ths7303_platform_data - Platform dependent data + * @ch_1: Bias value for channel one. + * @ch_2: Bias value for channel two. + * @ch_3: Bias value for channel three. + */ +struct ths7303_platform_data { + u8 ch_1; + u8 ch_2; + u8 ch_3; +}; + +#endif diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h index a59a84854dc..a40a6a348d2 100644 --- a/include/media/timb_radio.h +++ b/include/media/timb_radio.h @@ -23,13 +23,8 @@ struct timb_radio_platform_data { int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */ - struct { - struct i2c_board_info *info; - } tuner; - struct { - const char *module_name; - struct i2c_board_info *info; - } dsp; + struct i2c_board_info *tuner; + struct i2c_board_info *dsp; }; #endif diff --git a/include/media/tuner.h b/include/media/tuner.h index 51811eac46f..b46ebb48fe7 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -21,6 +21,7 @@ #ifndef _TUNER_H #define _TUNER_H +#ifdef __KERNEL__ #include <linux/videodev2.h> @@ -126,11 +127,20 @@ #define TUNER_PHILIPS_FMD1216MEX_MK3 78 #define TUNER_PHILIPS_FM1216MK5 79 #define TUNER_PHILIPS_FQ1216LME_MK3 80 /* Active loopthrough, no FM */ + #define TUNER_PARTSNIC_PTI_5NF05 81 #define TUNER_PHILIPS_CU1216L 82 #define TUNER_NXP_TDA18271 83 #define TUNER_SONY_BTF_PXN01Z 84 #define TUNER_PHILIPS_FQ1236_MK5 85 /* NTSC, TDA9885, no FM radio */ +#define TUNER_TENA_TNF_5337 86 + +#define TUNER_XC4000 87 /* Xceive Silicon Tuner */ +#define TUNER_XC5000C 88 /* Xceive Silicon Tuner */ + +#define TUNER_SONY_BTF_PG472Z 89 /* PAL+SECAM */ +#define TUNER_SONY_BTF_PK467Z 90 /* NTSC_JP */ +#define TUNER_SONY_BTF_PB463Z 91 /* NTSC */ /* tv card specific */ #define TDA9887_PRESENT (1<<0) @@ -156,14 +166,10 @@ #define TDA9887_GAIN_NORMAL (1<<20) #define TDA9887_RIF_41_3 (1<<21) /* radio IF1 41.3 vs 33.3 */ -#ifdef __KERNEL__ - enum tuner_mode { - T_UNINITIALIZED = 0, T_RADIO = 1 << V4L2_TUNER_RADIO, T_ANALOG_TV = 1 << V4L2_TUNER_ANALOG_TV, - T_DIGITAL_TV = 1 << V4L2_TUNER_DIGITAL_TV, - T_STANDBY = 1 << 31 + /* Don't need to map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */ }; /* Older boards only had a single tuner device. Nowadays multiple tuner @@ -186,18 +192,10 @@ struct tuner_setup { unsigned short addr; /* I2C address */ unsigned int type; /* Tuner type */ unsigned int mode_mask; /* Allowed tuner modes */ - unsigned int config; /* configuraion for more complex tuners */ + void *config; /* configuraion for more complex tuners */ int (*tuner_callback) (void *dev, int component, int cmd, int arg); }; #endif /* __KERNEL__ */ #endif /* _TUNER_H */ - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h index a8ad75a9152..f7119ee3977 100644 --- a/include/media/tveeprom.h +++ b/include/media/tveeprom.h @@ -1,6 +1,19 @@ /* */ +enum tveeprom_audio_processor { + /* No audio processor present */ + TVEEPROM_AUDPROC_NONE, + /* The audio processor is internal to the video processor */ + TVEEPROM_AUDPROC_INTERNAL, + /* The audio processor is a MSPXXXX device */ + TVEEPROM_AUDPROC_MSP, + /* The audio processor is another device */ + TVEEPROM_AUDPROC_OTHER, +}; + +#include <linux/if_ether.h> + struct tveeprom { u32 has_radio; /* If has_ir == 0, then it is unknown what the IR capabilities are, @@ -29,7 +42,7 @@ struct tveeprom { u32 revision; u32 serial_number; char rev_str[5]; - u8 MAC_address[6]; + u8 MAC_address[ETH_ALEN]; }; void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, diff --git a/include/media/tvp514x.h b/include/media/tvp514x.h index 74387e83f5b..86ed7e80683 100644 --- a/include/media/tvp514x.h +++ b/include/media/tvp514x.h @@ -96,12 +96,9 @@ enum tvp514x_output { /** * struct tvp514x_platform_data - Platform data values and access functions. - * @power_set: Power state access function, zero is off, non-zero is on. - * @ifparm: Interface parameters access function. - * @priv_data_set: Device private data (pointer) access function. * @clk_polarity: Clock polarity of the current interface. - * @ hs_polarity: HSYNC Polarity configuration for current interface. - * @ vs_polarity: VSYNC Polarity configuration for current interface. + * @hs_polarity: HSYNC Polarity configuration for current interface. + * @vs_polarity: VSYNC Polarity configuration for current interface. */ struct tvp514x_platform_data { /* Interface control params */ diff --git a/include/media/tvp7002.h b/include/media/tvp7002.h index ee4353459ef..fadb6afe9ef 100644 --- a/include/media/tvp7002.h +++ b/include/media/tvp7002.h @@ -26,31 +26,29 @@ #ifndef _TVP7002_H_ #define _TVP7002_H_ -/* Platform-dependent data - * - * clk_polarity: - * 0 -> data clocked out on rising edge of DATACLK signal - * 1 -> data clocked out on falling edge of DATACLK signal - * hs_polarity: - * 0 -> active low HSYNC output - * 1 -> active high HSYNC output - * sog_polarity: - * 0 -> normal operation - * 1 -> operation with polarity inverted - * vs_polarity: - * 0 -> active low VSYNC output - * 1 -> active high VSYNC output - * fid_polarity: - * 0 -> the field ID output is set to logic 1 for an odd - * field (field 1) and set to logic 0 for an even - * field (field 0). - * 1 -> operation with polarity inverted. +#define TVP7002_MODULE_NAME "tvp7002" + +/** + * struct tvp7002_config - Platform dependent data + *@clk_polarity: Clock polarity + * 0 - Data clocked out on rising edge of DATACLK signal + * 1 - Data clocked out on falling edge of DATACLK signal + *@hs_polarity: HSYNC polarity + * 0 - Active low HSYNC output, 1 - Active high HSYNC output + *@vs_polarity: VSYNC Polarity + * 0 - Active low VSYNC output, 1 - Active high VSYNC output + *@fid_polarity: Active-high Field ID polarity. + * 0 - The field ID output is set to logic 1 for an odd field + * (field 1) and set to logic 0 for an even field (field 0). + * 1 - Operation with polarity inverted. + *@sog_polarity: Active high Sync on Green output polarity. + * 0 - Normal operation, 1 - Operation with polarity inverted */ struct tvp7002_config { - u8 clk_polarity; - u8 hs_polarity; - u8 vs_polarity; - u8 fid_polarity; - u8 sog_polarity; + bool clk_polarity; + bool hs_polarity; + bool vs_polarity; + bool fid_polarity; + bool sog_polarity; }; #endif diff --git a/include/media/uda1342.h b/include/media/uda1342.h new file mode 100644 index 00000000000..cd156403a36 --- /dev/null +++ b/include/media/uda1342.h @@ -0,0 +1,29 @@ +/* + * uda1342.h - definition for uda1342 inputs + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef _UDA1342_H_ +#define _UDA1342_H_ + +/* The UDA1342 has 2 inputs */ + +#define UDA1342_IN1 1 +#define UDA1342_IN2 2 + +#endif diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h new file mode 100644 index 00000000000..768356917be --- /dev/null +++ b/include/media/v4l2-async.h @@ -0,0 +1,97 @@ +/* + * V4L2 asynchronous subdevice registration API + * + * Copyright (C) 2012-2013, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef V4L2_ASYNC_H +#define V4L2_ASYNC_H + +#include <linux/list.h> +#include <linux/mutex.h> + +struct device; +struct device_node; +struct v4l2_device; +struct v4l2_subdev; +struct v4l2_async_notifier; + +/* A random max subdevice number, used to allocate an array on stack */ +#define V4L2_MAX_SUBDEVS 128U + +enum v4l2_async_match_type { + V4L2_ASYNC_MATCH_CUSTOM, + V4L2_ASYNC_MATCH_DEVNAME, + V4L2_ASYNC_MATCH_I2C, + V4L2_ASYNC_MATCH_OF, +}; + +/** + * struct v4l2_async_subdev - sub-device descriptor, as known to a bridge + * @bus_type: subdevice bus type to select the appropriate matching method + * @match: union of per-bus type matching data sets + * @list: used to link struct v4l2_async_subdev objects, waiting to be + * probed, to a notifier->waiting list + */ +struct v4l2_async_subdev { + enum v4l2_async_match_type match_type; + union { + struct { + const struct device_node *node; + } of; + struct { + const char *name; + } device_name; + struct { + int adapter_id; + unsigned short address; + } i2c; + struct { + bool (*match)(struct device *, + struct v4l2_async_subdev *); + void *priv; + } custom; + } match; + + /* v4l2-async core private: not to be used by drivers */ + struct list_head list; +}; + +/** + * v4l2_async_notifier - v4l2_device notifier data + * @num_subdevs:number of subdevices + * @subdevs: array of pointers to subdevice descriptors + * @v4l2_dev: pointer to struct v4l2_device + * @waiting: list of struct v4l2_async_subdev, waiting for their drivers + * @done: list of struct v4l2_subdev, already probed + * @list: member in a global list of notifiers + * @bound: a subdevice driver has successfully probed one of subdevices + * @complete: all subdevices have been probed successfully + * @unbind: a subdevice is leaving + */ +struct v4l2_async_notifier { + unsigned int num_subdevs; + struct v4l2_async_subdev **subdevs; + struct v4l2_device *v4l2_dev; + struct list_head waiting; + struct list_head done; + struct list_head list; + int (*bound)(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd); + int (*complete)(struct v4l2_async_notifier *notifier); + void (*unbind)(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd); +}; + +int v4l2_async_notifier_register(struct v4l2_device *v4l2_dev, + struct v4l2_async_notifier *notifier); +void v4l2_async_notifier_unregister(struct v4l2_async_notifier *notifier); +int v4l2_async_register_subdev(struct v4l2_subdev *sd); +void v4l2_async_unregister_subdev(struct v4l2_subdev *sd); +#endif diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h deleted file mode 100644 index 44fe44ec9ea..00000000000 --- a/include/media/v4l2-chip-ident.h +++ /dev/null @@ -1,323 +0,0 @@ -/* - v4l2 chip identifiers header - - This header provides a list of chip identifiers that can be returned - through the VIDIOC_DBG_G_CHIP_IDENT ioctl. - - Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef V4L2_CHIP_IDENT_H_ -#define V4L2_CHIP_IDENT_H_ - -/* VIDIOC_DBG_G_CHIP_IDENT: identifies the actual chip installed on the board */ - -/* KEEP THIS LIST ORDERED BY ID! - Otherwise it will be hard to see which ranges are already in use when - adding support to a new chip family. */ -enum { - /* general idents: reserved range 0-49 */ - V4L2_IDENT_NONE = 0, /* No chip matched */ - V4L2_IDENT_AMBIGUOUS = 1, /* Match too general, multiple chips matched */ - V4L2_IDENT_UNKNOWN = 2, /* Chip found, but cannot identify */ - - /* module tvaudio: reserved range 50-99 */ - V4L2_IDENT_TVAUDIO = 50, /* A tvaudio chip, unknown which it is exactly */ - - /* Sony IMX074 */ - V4L2_IDENT_IMX074 = 74, - - /* module saa7110: just ident 100 */ - V4L2_IDENT_SAA7110 = 100, - - /* module saa7115: reserved range 101-149 */ - V4L2_IDENT_SAA7111 = 101, - V4L2_IDENT_SAA7111A = 102, - V4L2_IDENT_SAA7113 = 103, - V4L2_IDENT_SAA7114 = 104, - V4L2_IDENT_SAA7115 = 105, - V4L2_IDENT_SAA7118 = 108, - - /* module saa7127: reserved range 150-199 */ - V4L2_IDENT_SAA7127 = 157, - V4L2_IDENT_SAA7129 = 159, - - /* module cx25840: reserved range 200-249 */ - V4L2_IDENT_CX25836 = 236, - V4L2_IDENT_CX25837 = 237, - V4L2_IDENT_CX25840 = 240, - V4L2_IDENT_CX25841 = 241, - V4L2_IDENT_CX25842 = 242, - V4L2_IDENT_CX25843 = 243, - - /* OmniVision sensors: reserved range 250-299 */ - V4L2_IDENT_OV7670 = 250, - V4L2_IDENT_OV7720 = 251, - V4L2_IDENT_OV7725 = 252, - V4L2_IDENT_OV7660 = 253, - V4L2_IDENT_OV9650 = 254, - V4L2_IDENT_OV9655 = 255, - V4L2_IDENT_SOI968 = 256, - V4L2_IDENT_OV9640 = 257, - V4L2_IDENT_OV6650 = 258, - V4L2_IDENT_OV2640 = 259, - - /* module saa7146: reserved range 300-309 */ - V4L2_IDENT_SAA7146 = 300, - - /* Conexant MPEG encoder/decoders: reserved range 400-420 */ - V4L2_IDENT_CX23418_843 = 403, /* Integrated A/V Decoder on the '418 */ - V4L2_IDENT_CX23415 = 415, - V4L2_IDENT_CX23416 = 416, - V4L2_IDENT_CX23417 = 417, - V4L2_IDENT_CX23418 = 418, - - /* module bt819: reserved range 810-819 */ - V4L2_IDENT_BT815A = 815, - V4L2_IDENT_BT817A = 817, - V4L2_IDENT_BT819A = 819, - - /* module au0828 */ - V4L2_IDENT_AU0828 = 828, - - /* module bt856: just ident 856 */ - V4L2_IDENT_BT856 = 856, - - /* module bt866: just ident 866 */ - V4L2_IDENT_BT866 = 866, - - /* module ks0127: reserved range 1120-1129 */ - V4L2_IDENT_KS0122S = 1122, - V4L2_IDENT_KS0127 = 1127, - V4L2_IDENT_KS0127B = 1128, - - /* module indycam: just ident 2000 */ - V4L2_IDENT_INDYCAM = 2000, - - /* module vp27smpx: just ident 2700 */ - V4L2_IDENT_VP27SMPX = 2700, - - /* module vpx3220: reserved range: 3210-3229 */ - V4L2_IDENT_VPX3214C = 3214, - V4L2_IDENT_VPX3216B = 3216, - V4L2_IDENT_VPX3220A = 3220, - - /* VX855 just ident 3409 */ - /* Other via devs could use 3314, 3324, 3327, 3336, 3364, 3353 */ - V4L2_IDENT_VIA_VX855 = 3409, - - /* module tvp5150 */ - V4L2_IDENT_TVP5150 = 5150, - - /* module saa5246a: just ident 5246 */ - V4L2_IDENT_SAA5246A = 5246, - - /* module saa5249: just ident 5249 */ - V4L2_IDENT_SAA5249 = 5249, - - /* module cs5345: just ident 5345 */ - V4L2_IDENT_CS5345 = 5345, - - /* module tea6415c: just ident 6415 */ - V4L2_IDENT_TEA6415C = 6415, - - /* module tea6420: just ident 6420 */ - V4L2_IDENT_TEA6420 = 6420, - - /* module saa6588: just ident 6588 */ - V4L2_IDENT_SAA6588 = 6588, - - /* module saa6752hs: reserved range 6750-6759 */ - V4L2_IDENT_SAA6752HS = 6752, - V4L2_IDENT_SAA6752HS_AC3 = 6753, - - /* modules tef6862: just ident 6862 */ - V4L2_IDENT_TEF6862 = 6862, - - /* module tvp7002: just ident 7002 */ - V4L2_IDENT_TVP7002 = 7002, - - /* module adv7170: just ident 7170 */ - V4L2_IDENT_ADV7170 = 7170, - - /* module adv7175: just ident 7175 */ - V4L2_IDENT_ADV7175 = 7175, - - /* module adv7180: just ident 7180 */ - V4L2_IDENT_ADV7180 = 7180, - - /* module saa7185: just ident 7185 */ - V4L2_IDENT_SAA7185 = 7185, - - /* module saa7191: just ident 7191 */ - V4L2_IDENT_SAA7191 = 7191, - - /* module ths7303: just ident 7303 */ - V4L2_IDENT_THS7303 = 7303, - - /* module adv7343: just ident 7343 */ - V4L2_IDENT_ADV7343 = 7343, - - /* module saa7706h: just ident 7706 */ - V4L2_IDENT_SAA7706H = 7706, - - /* module mt9v011, just ident 8243 */ - V4L2_IDENT_MT9V011 = 8243, - - /* module wm8739: just ident 8739 */ - V4L2_IDENT_WM8739 = 8739, - - /* module wm8775: just ident 8775 */ - V4L2_IDENT_WM8775 = 8775, - - /* module cafe_ccic, just ident 8801 */ - V4L2_IDENT_CAFE = 8801, - - /* AKM AK8813/AK8814 */ - V4L2_IDENT_AK8813 = 8813, - V4L2_IDENT_AK8814 = 8814, - - /* module cx23885 and cx25840 */ - V4L2_IDENT_CX23885 = 8850, - V4L2_IDENT_CX23885_AV = 8851, /* Integrated A/V decoder */ - V4L2_IDENT_CX23887 = 8870, - V4L2_IDENT_CX23887_AV = 8871, /* Integrated A/V decoder */ - V4L2_IDENT_CX23888 = 8880, - V4L2_IDENT_CX23888_AV = 8881, /* Integrated A/V decoder */ - V4L2_IDENT_CX23888_IR = 8882, /* Integrated infrared controller */ - - /* module tda9840: just ident 9840 */ - V4L2_IDENT_TDA9840 = 9840, - - /* module tw9910: just ident 9910 */ - V4L2_IDENT_TW9910 = 9910, - - /* module sn9c20x: just ident 10000 */ - V4L2_IDENT_SN9C20X = 10000, - - /* module cx231xx and cx25840 */ - V4L2_IDENT_CX2310X_AV = 23099, /* Integrated A/V decoder; not in '100 */ - V4L2_IDENT_CX23100 = 23100, - V4L2_IDENT_CX23101 = 23101, - V4L2_IDENT_CX23102 = 23102, - - /* module msp3400: reserved range 34000-34999 for msp34xx */ - V4L2_IDENT_MSPX4XX = 34000, /* generic MSPX4XX identifier, only - use internally (tveeprom.c). */ - - V4L2_IDENT_MSP3400B = 34002, - V4L2_IDENT_MSP3400C = 34003, - V4L2_IDENT_MSP3400D = 34004, - V4L2_IDENT_MSP3400G = 34007, - V4L2_IDENT_MSP3401G = 34017, - V4L2_IDENT_MSP3402G = 34027, - V4L2_IDENT_MSP3405D = 34054, - V4L2_IDENT_MSP3405G = 34057, - V4L2_IDENT_MSP3407D = 34074, - V4L2_IDENT_MSP3407G = 34077, - - V4L2_IDENT_MSP3410B = 34102, - V4L2_IDENT_MSP3410C = 34103, - V4L2_IDENT_MSP3410D = 34104, - V4L2_IDENT_MSP3410G = 34107, - V4L2_IDENT_MSP3411G = 34117, - V4L2_IDENT_MSP3412G = 34127, - V4L2_IDENT_MSP3415D = 34154, - V4L2_IDENT_MSP3415G = 34157, - V4L2_IDENT_MSP3417D = 34174, - V4L2_IDENT_MSP3417G = 34177, - - V4L2_IDENT_MSP3420G = 34207, - V4L2_IDENT_MSP3421G = 34217, - V4L2_IDENT_MSP3422G = 34227, - V4L2_IDENT_MSP3425G = 34257, - V4L2_IDENT_MSP3427G = 34277, - - V4L2_IDENT_MSP3430G = 34307, - V4L2_IDENT_MSP3431G = 34317, - V4L2_IDENT_MSP3435G = 34357, - V4L2_IDENT_MSP3437G = 34377, - - V4L2_IDENT_MSP3440G = 34407, - V4L2_IDENT_MSP3441G = 34417, - V4L2_IDENT_MSP3442G = 34427, - V4L2_IDENT_MSP3445G = 34457, - V4L2_IDENT_MSP3447G = 34477, - - V4L2_IDENT_MSP3450G = 34507, - V4L2_IDENT_MSP3451G = 34517, - V4L2_IDENT_MSP3452G = 34527, - V4L2_IDENT_MSP3455G = 34557, - V4L2_IDENT_MSP3457G = 34577, - - V4L2_IDENT_MSP3460G = 34607, - V4L2_IDENT_MSP3461G = 34617, - V4L2_IDENT_MSP3465G = 34657, - V4L2_IDENT_MSP3467G = 34677, - - /* module msp3400: reserved range 44000-44999 for msp44xx */ - V4L2_IDENT_MSP4400G = 44007, - V4L2_IDENT_MSP4408G = 44087, - V4L2_IDENT_MSP4410G = 44107, - V4L2_IDENT_MSP4418G = 44187, - V4L2_IDENT_MSP4420G = 44207, - V4L2_IDENT_MSP4428G = 44287, - V4L2_IDENT_MSP4440G = 44407, - V4L2_IDENT_MSP4448G = 44487, - V4L2_IDENT_MSP4450G = 44507, - V4L2_IDENT_MSP4458G = 44587, - - /* Micron CMOS sensor chips: 45000-45099 */ - V4L2_IDENT_MT9M001C12ST = 45000, - V4L2_IDENT_MT9M001C12STM = 45005, - V4L2_IDENT_MT9M111 = 45007, - V4L2_IDENT_MT9M112 = 45008, - V4L2_IDENT_MT9V022IX7ATC = 45010, /* No way to detect "normal" I77ATx */ - V4L2_IDENT_MT9V022IX7ATM = 45015, /* and "lead free" IA7ATx chips */ - V4L2_IDENT_MT9T031 = 45020, - V4L2_IDENT_MT9T111 = 45021, - V4L2_IDENT_MT9T112 = 45022, - V4L2_IDENT_MT9V111 = 45031, - V4L2_IDENT_MT9V112 = 45032, - - /* HV7131R CMOS sensor: just ident 46000 */ - V4L2_IDENT_HV7131R = 46000, - - /* Sharp RJ54N1CB0C, 0xCB0C = 51980 */ - V4L2_IDENT_RJ54N1CB0C = 51980, - - /* module m52790: just ident 52790 */ - V4L2_IDENT_M52790 = 52790, - - /* module cs53132a: just ident 53132 */ - V4L2_IDENT_CS53l32A = 53132, - - /* modules upd61151 MPEG2 encoder: just ident 54000 */ - V4L2_IDENT_UPD61161 = 54000, - /* modules upd61152 MPEG2 encoder with AC3: just ident 54001 */ - V4L2_IDENT_UPD61162 = 54001, - - /* module upd64031a: just ident 64031 */ - V4L2_IDENT_UPD64031A = 64031, - - /* module upd64083: just ident 64083 */ - V4L2_IDENT_UPD64083 = 64083, - - /* Don't just add new IDs at the end: KEEP THIS LIST ORDERED BY ID! */ -}; - -#endif diff --git a/include/media/v4l2-clk.h b/include/media/v4l2-clk.h new file mode 100644 index 00000000000..0b36cc13830 --- /dev/null +++ b/include/media/v4l2-clk.h @@ -0,0 +1,71 @@ +/* + * V4L2 clock service + * + * Copyright (C) 2012-2013, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ATTENTION: This is a temporary API and it shall be replaced by the generic + * clock API, when the latter becomes widely available. + */ + +#ifndef MEDIA_V4L2_CLK_H +#define MEDIA_V4L2_CLK_H + +#include <linux/atomic.h> +#include <linux/export.h> +#include <linux/list.h> +#include <linux/mutex.h> + +struct module; +struct device; + +struct v4l2_clk { + struct list_head list; + const struct v4l2_clk_ops *ops; + const char *dev_id; + const char *id; + int enable; + struct mutex lock; /* Protect the enable count */ + atomic_t use_count; + void *priv; +}; + +struct v4l2_clk_ops { + struct module *owner; + int (*enable)(struct v4l2_clk *clk); + void (*disable)(struct v4l2_clk *clk); + unsigned long (*get_rate)(struct v4l2_clk *clk); + int (*set_rate)(struct v4l2_clk *clk, unsigned long); +}; + +struct v4l2_clk *v4l2_clk_register(const struct v4l2_clk_ops *ops, + const char *dev_name, + const char *name, void *priv); +void v4l2_clk_unregister(struct v4l2_clk *clk); +struct v4l2_clk *v4l2_clk_get(struct device *dev, const char *id); +void v4l2_clk_put(struct v4l2_clk *clk); +int v4l2_clk_enable(struct v4l2_clk *clk); +void v4l2_clk_disable(struct v4l2_clk *clk); +unsigned long v4l2_clk_get_rate(struct v4l2_clk *clk); +int v4l2_clk_set_rate(struct v4l2_clk *clk, unsigned long rate); + +struct module; + +struct v4l2_clk *__v4l2_clk_register_fixed(const char *dev_id, + const char *id, unsigned long rate, struct module *owner); +void v4l2_clk_unregister_fixed(struct v4l2_clk *clk); + +static inline struct v4l2_clk *v4l2_clk_register_fixed(const char *dev_id, + const char *id, + unsigned long rate) +{ + return __v4l2_clk_register_fixed(dev_id, id, rate, THIS_MODULE); +} + +#define v4l2_clk_name_i2c(name, size, adap, client) snprintf(name, size, \ + "%d-%04x", adap, client) + +#endif diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index a659319e858..48f974866f1 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -35,7 +35,7 @@ printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg) #define v4l_client_printk(level, client, fmt, arg...) \ - v4l_printk(level, (client)->driver->driver.name, (client)->adapter, \ + v4l_printk(level, (client)->dev.driver->name, (client)->adapter, \ (client)->addr, fmt , ## arg) #define v4l_err(client, fmt, arg...) \ @@ -80,27 +80,13 @@ /* ------------------------------------------------------------------------- */ -/* Priority helper functions */ - -struct v4l2_prio_state { - atomic_t prios[4]; -}; -void v4l2_prio_init(struct v4l2_prio_state *global); -int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local, - enum v4l2_priority new); -void v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local); -void v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority local); -enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global); -int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local); - -/* ------------------------------------------------------------------------- */ - /* Control helper functions */ int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl, const char * const *menu_items); const char *v4l2_ctrl_get_name(u32 id); const char * const *v4l2_ctrl_get_menu(u32 id); +const s64 *v4l2_ctrl_get_int_menu(u32 id, u32 *len); int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def); int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qctrl, const char * const *menu_items); @@ -115,16 +101,6 @@ u32 v4l2_ctrl_next(const u32 * const *ctrl_classes, u32 id); /* ------------------------------------------------------------------------- */ -/* Register/chip ident helper function */ - -struct i2c_client; /* forward reference */ -int v4l2_chip_match_i2c_client(struct i2c_client *c, const struct v4l2_dbg_match *match); -int v4l2_chip_ident_i2c_client(struct i2c_client *c, struct v4l2_dbg_chip_ident *chip, - u32 ident, u32 revision); -int v4l2_chip_match_host(const struct v4l2_dbg_match *match); - -/* ------------------------------------------------------------------------- */ - /* I2C Helper functions */ struct i2c_driver; @@ -148,7 +124,7 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, struct i2c_adapter *adapter, struct i2c_board_info *info, const unsigned short *probe_addrs); -/* Initialize an v4l2_subdev with data from an i2c_client struct */ +/* Initialize a v4l2_subdev with data from an i2c_client struct */ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, const struct v4l2_subdev_ops *ops); /* Return i2c client address of v4l2_subdev. */ @@ -181,7 +157,7 @@ struct spi_device; struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev, struct spi_master *master, struct spi_board_info *info); -/* Initialize an v4l2_subdev with data from an spi_device struct */ +/* Initialize a v4l2_subdev with data from an spi_device struct */ void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi, const struct v4l2_subdev_ops *ops); #endif @@ -216,7 +192,6 @@ void v4l_bound_align_image(unsigned int *w, unsigned int wmin, unsigned int *h, unsigned int hmin, unsigned int hmax, unsigned int halign, unsigned int salign); -int v4l_fill_dv_preset_info(u32 preset, struct v4l2_dv_enum_preset *info); struct v4l2_discrete_probe { const struct v4l2_frmsize_discrete *sizes; @@ -227,4 +202,6 @@ const struct v4l2_frmsize_discrete *v4l2_find_nearest_format( const struct v4l2_discrete_probe *probe, s32 width, s32 height); +void v4l2_get_timestamp(struct timeval *tv); + #endif /* V4L2_COMMON_H_ */ diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index 97d063837b6..16f7f260651 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -22,14 +22,19 @@ #define _V4L2_CTRLS_H #include <linux/list.h> -#include <linux/device.h> +#include <linux/mutex.h> #include <linux/videodev2.h> /* forward references */ +struct file; struct v4l2_ctrl_handler; +struct v4l2_ctrl_helper; struct v4l2_ctrl; struct video_device; struct v4l2_subdev; +struct v4l2_subscribed_event; +struct v4l2_fh; +struct poll_table_struct; /** struct v4l2_ctrl_ops - The control operations that the driver has to provide. * @g_volatile_ctrl: Get a new value for this control. Generally only relevant @@ -49,8 +54,11 @@ struct v4l2_ctrl_ops { int (*s_ctrl)(struct v4l2_ctrl *ctrl); }; +typedef void (*v4l2_ctrl_notify_fnc)(struct v4l2_ctrl *ctrl, void *priv); + /** struct v4l2_ctrl - The control structure. * @node: The list node. + * @ev_subs: The list of control event subscriptions. * @handler: The handler that owns the control. * @cluster: Point to start of cluster array. * @ncontrols: Number of controls in cluster array. @@ -61,10 +69,19 @@ struct v4l2_ctrl_ops { * @is_private: If set, then this control is private to its handler and it * will not be added to any other handlers. Drivers can set * this flag. - * @is_volatile: If set, then this control is volatile. This means that the - * control's current value cannot be cached and needs to be - * retrieved through the g_volatile_ctrl op. Drivers can set - * this flag. + * @is_auto: If set, then this control selects whether the other cluster + * members are in 'automatic' mode or 'manual' mode. This is + * used for autogain/gain type clusters. Drivers should never + * set this flag directly. + * @has_volatiles: If set, then one or more members of the cluster are volatile. + * Drivers should never touch this flag. + * @call_notify: If set, then call the handler's notify function whenever the + * control's value changes. + * @manual_mode_value: If the is_auto flag is set, then this is the value + * of the auto control that determines if that control is in + * manual mode. So if the value of the auto control equals this + * value, then the whole cluster is in manual mode. Drivers should + * never set this flag directly. * @ops: The control ops. * @id: The control ID. * @name: The control name. @@ -97,6 +114,7 @@ struct v4l2_ctrl_ops { struct v4l2_ctrl { /* Administrative fields */ struct list_head node; + struct list_head ev_subs; struct v4l2_ctrl_handler *handler; struct v4l2_ctrl **cluster; unsigned ncontrols; @@ -104,7 +122,10 @@ struct v4l2_ctrl { unsigned int is_new:1; unsigned int is_private:1; - unsigned int is_volatile:1; + unsigned int is_auto:1; + unsigned int has_volatiles:1; + unsigned int call_notify:1; + unsigned int manual_mode_value:8; const struct v4l2_ctrl_ops *ops; u32 id; @@ -115,7 +136,10 @@ struct v4l2_ctrl { u32 step; u32 menu_skip_mask; }; - const char * const *qmenu; + union { + const char * const *qmenu; + const s64 *qmenu_int; + }; unsigned long flags; union { s32 val; @@ -134,6 +158,7 @@ struct v4l2_ctrl { * @node: List node for the sorted list. * @next: Single-link list node for the hash. * @ctrl: The actual control information. + * @helper: Pointer to helper struct. Used internally in prepare_ext_ctrls(). * * Each control handler has a list of these refs. The list_head is used to * keep a sorted-by-control-ID list of all controls, while the next pointer @@ -143,27 +168,37 @@ struct v4l2_ctrl_ref { struct list_head node; struct v4l2_ctrl_ref *next; struct v4l2_ctrl *ctrl; + struct v4l2_ctrl_helper *helper; }; /** struct v4l2_ctrl_handler - The control handler keeps track of all the * controls: both the controls owned by the handler and those inherited * from other handlers. + * @_lock: Default for "lock". * @lock: Lock to control access to this handler and its controls. + * May be replaced by the user right after init. * @ctrls: The list of controls owned by this handler. * @ctrl_refs: The list of control references. * @cached: The last found control reference. It is common that the same * control is needed multiple times, so this is a simple * optimization. * @buckets: Buckets for the hashing. Allows for quick control lookup. + * @notify: A notify callback that is called whenever the control changes value. + * Note that the handler's lock is held when the notify function + * is called! + * @notify_priv: Passed as argument to the v4l2_ctrl notify callback. * @nr_of_buckets: Total number of buckets in the array. * @error: The error code of the first failed control addition. */ struct v4l2_ctrl_handler { - struct mutex lock; + struct mutex _lock; + struct mutex *lock; struct list_head ctrls; struct list_head ctrl_refs; struct v4l2_ctrl_ref *cached; struct v4l2_ctrl_ref **buckets; + v4l2_ctrl_notify_fnc notify; + void *notify_priv; u16 nr_of_buckets; int error; }; @@ -190,9 +225,6 @@ struct v4l2_ctrl_handler { * must be NULL. * @is_private: If set, then this control is private to its handler and it * will not be added to any other handlers. - * @is_volatile: If set, then this control is volatile. This means that the - * control's current value cannot be cached and needs to be - * retrieved through the g_volatile_ctrl op. */ struct v4l2_ctrl_config { const struct v4l2_ctrl_ops *ops; @@ -206,8 +238,8 @@ struct v4l2_ctrl_config { u32 flags; u32 menu_skip_mask; const char * const *qmenu; + const s64 *qmenu_int; unsigned int is_private:1; - unsigned int is_volatile:1; }; /** v4l2_ctrl_fill() - Fill in the control fields based on the control ID. @@ -228,7 +260,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags); -/** v4l2_ctrl_handler_init() - Initialize the control handler. +/** v4l2_ctrl_handler_init_class() - Initialize the control handler. * @hdl: The control handler. * @nr_of_controls_hint: A hint of how many controls this handler is * expected to refer to. This is the total number, so including @@ -237,12 +269,35 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, * are allocated) or the control lookup becomes slower (not enough * buckets are allocated, so there are more slow list lookups). * It will always work, though. + * @key: Used by the lock validator if CONFIG_LOCKDEP is set. + * @name: Used by the lock validator if CONFIG_LOCKDEP is set. * * Returns an error if the buckets could not be allocated. This error will * also be stored in @hdl->error. + * + * Never use this call directly, always use the v4l2_ctrl_handler_init + * macro that hides the @key and @name arguments. */ -int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl, - unsigned nr_of_controls_hint); +int v4l2_ctrl_handler_init_class(struct v4l2_ctrl_handler *hdl, + unsigned nr_of_controls_hint, + struct lock_class_key *key, const char *name); + +#ifdef CONFIG_LOCKDEP +#define v4l2_ctrl_handler_init(hdl, nr_of_controls_hint) \ +( \ + ({ \ + static struct lock_class_key _key; \ + v4l2_ctrl_handler_init_class(hdl, nr_of_controls_hint, \ + &_key, \ + KBUILD_BASENAME ":" \ + __stringify(__LINE__) ":" \ + "(" #hdl ")->_lock"); \ + }) \ +) +#else +#define v4l2_ctrl_handler_init(hdl, nr_of_controls_hint) \ + v4l2_ctrl_handler_init_class(hdl, nr_of_controls_hint, NULL, NULL) +#endif /** v4l2_ctrl_handler_free() - Free all controls owned by the handler and free * the control list. @@ -331,6 +386,46 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl, const struct v4l2_ctrl_ops *ops, u32 id, s32 max, s32 mask, s32 def); +/** v4l2_ctrl_new_std_menu_items() - Create a new standard V4L2 menu control + * with driver specific menu. + * @hdl: The control handler. + * @ops: The control ops. + * @id: The control ID. + * @max: The control's maximum value. + * @mask: The control's skip mask for menu controls. This makes it + * easy to skip menu items that are not valid. If bit X is set, + * then menu item X is skipped. Of course, this only works for + * menus with <= 32 menu items. There are no menus that come + * close to that number, so this is OK. Should we ever need more, + * then this will have to be extended to a u64 or a bit array. + * @def: The control's default value. + * @qmenu: The new menu. + * + * Same as v4l2_ctrl_new_std_menu(), but @qmenu will be the driver specific + * menu of this control. + * + */ +struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, u32 id, s32 max, + s32 mask, s32 def, const char * const *qmenu); + +/** v4l2_ctrl_new_int_menu() - Create a new standard V4L2 integer menu control. + * @hdl: The control handler. + * @ops: The control ops. + * @id: The control ID. + * @max: The control's maximum value. + * @def: The control's default value. + * @qmenu_int: The control's menu entries. + * + * Same as v4l2_ctrl_new_std_menu(), but @mask is set to 0 and it additionaly + * takes as an argument an array of integers determining the menu items. + * + * If @id refers to a non-integer-menu control, then this function will return NULL. + */ +struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, + u32 id, s32 max, s32 def, const s64 *qmenu_int); + /** v4l2_ctrl_add_ctrl() - Add a control from another handler to this handler. * @hdl: The control handler. * @ctrl: The control to add. @@ -347,14 +442,28 @@ struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl, * @hdl: The control handler. * @add: The control handler whose controls you want to add to * the @hdl control handler. + * @filter: This function will filter which controls should be added. * - * Does nothing if either of the two is a NULL pointer. + * Does nothing if either of the two handlers is a NULL pointer. + * If @filter is NULL, then all controls are added. Otherwise only those + * controls for which @filter returns true will be added. * In case of an error @hdl->error will be set to the error code (if it * wasn't set already). */ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, - struct v4l2_ctrl_handler *add); + struct v4l2_ctrl_handler *add, + bool (*filter)(const struct v4l2_ctrl *ctrl)); +/** v4l2_ctrl_radio_filter() - Standard filter for radio controls. + * @ctrl: The control that is filtered. + * + * This will return true for any controls that are valid for radio device + * nodes. Those are all of the V4L2_CID_AUDIO_* user controls and all FM + * transmitter class controls. + * + * This function is to be used with v4l2_ctrl_add_handler(). + */ +bool v4l2_ctrl_radio_filter(const struct v4l2_ctrl *ctrl); /** v4l2_ctrl_cluster() - Mark all controls in the cluster as belonging to that cluster. * @ncontrols: The number of controls in this cluster. @@ -363,6 +472,39 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls); +/** v4l2_ctrl_auto_cluster() - Mark all controls in the cluster as belonging to + * that cluster and set it up for autofoo/foo-type handling. + * @ncontrols: The number of controls in this cluster. + * @controls: The cluster control array of size @ncontrols. The first control + * must be the 'auto' control (e.g. autogain, autoexposure, etc.) + * @manual_val: The value for the first control in the cluster that equals the + * manual setting. + * @set_volatile: If true, then all controls except the first auto control will + * be volatile. + * + * Use for control groups where one control selects some automatic feature and + * the other controls are only active whenever the automatic feature is turned + * off (manual mode). Typical examples: autogain vs gain, auto-whitebalance vs + * red and blue balance, etc. + * + * The behavior of such controls is as follows: + * + * When the autofoo control is set to automatic, then any manual controls + * are set to inactive and any reads will call g_volatile_ctrl (if the control + * was marked volatile). + * + * When the autofoo control is set to manual, then any manual controls will + * be marked active, and any reads will just return the current value without + * going through g_volatile_ctrl. + * + * In addition, this function will set the V4L2_CTRL_FLAG_UPDATE flag + * on the autofoo control and V4L2_CTRL_FLAG_INACTIVE on the foo control(s) + * if autofoo is in auto mode. + */ +void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls, + u8 manual_val, bool set_volatile); + + /** v4l2_ctrl_find() - Find a control with the given ID. * @hdl: The control handler. * @id: The control ID to find. @@ -379,9 +521,9 @@ struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id); * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically. * Does nothing if @ctrl == NULL. * This will usually be called from within the s_ctrl op. + * The V4L2_EVENT_CTRL event will be generated afterwards. * - * This function can be called regardless of whether the control handler - * is locked or not. + * This function assumes that the control handler is locked. */ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active); @@ -391,32 +533,67 @@ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active); * * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically. * Does nothing if @ctrl == NULL. + * The V4L2_EVENT_CTRL event will be generated afterwards. * This will usually be called when starting or stopping streaming in the * driver. * - * This function can be called regardless of whether the control handler - * is locked or not. + * This function assumes that the control handler is not locked and will + * take the lock itself. */ void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed); +/** v4l2_ctrl_modify_range() - Update the range of a control. + * @ctrl: The control to update. + * @min: The control's minimum value. + * @max: The control's maximum value. + * @step: The control's step value + * @def: The control's default value. + * + * Update the range of a control on the fly. This works for control types + * INTEGER, BOOLEAN, MENU, INTEGER MENU and BITMASK. For menu controls the + * @step value is interpreted as a menu_skip_mask. + * + * An error is returned if one of the range arguments is invalid for this + * control type. + * + * This function assumes that the control handler is not locked and will + * take the lock itself. + */ +int v4l2_ctrl_modify_range(struct v4l2_ctrl *ctrl, + s32 min, s32 max, u32 step, s32 def); + /** v4l2_ctrl_lock() - Helper function to lock the handler * associated with the control. * @ctrl: The control to lock. */ static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl) { - mutex_lock(&ctrl->handler->lock); + mutex_lock(ctrl->handler->lock); } -/** v4l2_ctrl_lock() - Helper function to unlock the handler +/** v4l2_ctrl_unlock() - Helper function to unlock the handler * associated with the control. * @ctrl: The control to unlock. */ static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl) { - mutex_unlock(&ctrl->handler->lock); + mutex_unlock(ctrl->handler->lock); } +/** v4l2_ctrl_notify() - Function to set a notify callback for a control. + * @ctrl: The control. + * @notify: The callback function. + * @priv: The callback private handle, passed as argument to the callback. + * + * This function sets a callback function for the control. If @ctrl is NULL, + * then it will do nothing. If @notify is NULL, then the notify callback will + * be removed. + * + * There can be only one notify. If another already exists, then a WARN_ON + * will be issued and the function will do nothing. + */ +void v4l2_ctrl_notify(struct v4l2_ctrl *ctrl, v4l2_ctrl_notify_fnc notify, void *priv); + /** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver. * @ctrl: The control. * @@ -440,15 +617,56 @@ s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl); */ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val); +/** v4l2_ctrl_g_ctrl_int64() - Helper function to get a 64-bit control's value from within a driver. + * @ctrl: The control. + * + * This returns the control's value safely by going through the control + * framework. This function will lock the control's handler, so it cannot be + * used from within the &v4l2_ctrl_ops functions. + * + * This function is for 64-bit integer type controls only. + */ +s64 v4l2_ctrl_g_ctrl_int64(struct v4l2_ctrl *ctrl); + +/** v4l2_ctrl_s_ctrl_int64() - Helper function to set a 64-bit control's value from within a driver. + * @ctrl: The control. + * @val: The new value. + * + * This set the control's new value safely by going through the control + * framework. This function will lock the control's handler, so it cannot be + * used from within the &v4l2_ctrl_ops functions. + * + * This function is for 64-bit integer type controls only. + */ +int v4l2_ctrl_s_ctrl_int64(struct v4l2_ctrl *ctrl, s64 val); + +/* Internal helper functions that deal with control events. */ +extern const struct v4l2_subscribed_event_ops v4l2_ctrl_sub_ev_ops; +void v4l2_ctrl_replace(struct v4l2_event *old, const struct v4l2_event *new); +void v4l2_ctrl_merge(const struct v4l2_event *old, struct v4l2_event *new); + +/* Can be used as a vidioc_log_status function that just dumps all controls + associated with the filehandle. */ +int v4l2_ctrl_log_status(struct file *file, void *fh); + +/* Can be used as a vidioc_subscribe_event function that just subscribes + control events. */ +int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub); + +/* Can be used as a poll function that just polls for control events. */ +unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait); /* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc); int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm); int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl); -int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl); +int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, + struct v4l2_control *ctrl); int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c); int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c); -int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c); +int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, + struct v4l2_ext_controls *c); /* Helpers for subdevices. If the associated ctrl_handler == NULL then they will all return -EINVAL. */ @@ -460,4 +678,12 @@ int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl); int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl); +/* Can be used as a subscribe_event function that just subscribes control + events. */ +int v4l2_ctrl_subdev_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); + +/* Log all controls owned by subdev's control handler. */ +int v4l2_ctrl_subdev_log_status(struct v4l2_subdev *sd); + #endif diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 15802a067a1..eec6e460f64 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -16,12 +16,22 @@ #include <linux/mutex.h> #include <linux/videodev2.h> +#include <media/media-entity.h> + #define VIDEO_MAJOR 81 #define VFL_TYPE_GRABBER 0 #define VFL_TYPE_VBI 1 #define VFL_TYPE_RADIO 2 -#define VFL_TYPE_MAX 3 +#define VFL_TYPE_SUBDEV 3 +#define VFL_TYPE_SDR 4 +#define VFL_TYPE_MAX 5 + +/* Is this a receiver, transmitter or mem-to-mem? */ +/* Ignored for VFL_TYPE_SUBDEV. */ +#define VFL_DIR_RX 0 +#define VFL_DIR_TX 1 +#define VFL_DIR_M2M 2 struct v4l2_ioctl_callbacks; struct video_device; @@ -32,7 +42,25 @@ struct v4l2_ctrl_handler; Drivers can clear this flag if they want to block all future device access. It is cleared by video_unregister_device. */ #define V4L2_FL_REGISTERED (0) +/* file->private_data points to struct v4l2_fh */ #define V4L2_FL_USES_V4L2_FH (1) +/* Use the prio field of v4l2_fh for core priority checking */ +#define V4L2_FL_USE_FH_PRIO (2) + +/* Priority helper functions */ + +struct v4l2_prio_state { + atomic_t prios[4]; +}; + +void v4l2_prio_init(struct v4l2_prio_state *global); +int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local, + enum v4l2_priority new); +void v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local); +void v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority local); +enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global); +int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local); + struct v4l2_file_operations { struct module *owner; @@ -41,6 +69,11 @@ struct v4l2_file_operations { unsigned int (*poll) (struct file *, struct poll_table_struct *); long (*ioctl) (struct file *, unsigned int, unsigned long); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); +#ifdef CONFIG_COMPAT + long (*compat_ioctl32) (struct file *, unsigned int, unsigned long); +#endif + unsigned long (*get_unmapped_area) (struct file *, unsigned long, + unsigned long, unsigned long, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); int (*open) (struct file *); int (*release) (struct file *); @@ -54,6 +87,9 @@ struct v4l2_file_operations { struct video_device { +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_entity entity; +#endif /* device ops */ const struct v4l2_file_operations *fops; @@ -61,16 +97,23 @@ struct video_device struct device dev; /* v4l device */ struct cdev *cdev; /* character device */ - /* Set either parent or v4l2_dev if your driver uses v4l2_device */ - struct device *parent; /* device parent */ struct v4l2_device *v4l2_dev; /* v4l2_device parent */ + /* Only set parent if that can't be deduced from v4l2_dev */ + struct device *dev_parent; /* device parent */ /* Control handler associated with this device node. May be NULL. */ struct v4l2_ctrl_handler *ctrl_handler; + /* vb2_queue associated with this device node. May be NULL. */ + struct vb2_queue *queue; + + /* Priority state. If NULL, then v4l2_dev->prio will be used. */ + struct v4l2_prio_state *prio; + /* device info */ char name[32]; - int vfl_type; + int vfl_type; /* device type */ + int vfl_dir; /* receiver, transmitter or m2m */ /* 'minor' is set to -1 if the registration failed */ int minor; u16 num; @@ -87,30 +130,44 @@ struct video_device /* Video standard vars */ v4l2_std_id tvnorms; /* Supported tv norms */ - v4l2_std_id current_norm; /* Current tvnorm */ /* callbacks */ void (*release)(struct video_device *vdev); /* ioctl callbacks */ const struct v4l2_ioctl_ops *ioctl_ops; + DECLARE_BITMAP(valid_ioctls, BASE_VIDIOC_PRIVATE); /* serialization lock */ + DECLARE_BITMAP(disable_locking, BASE_VIDIOC_PRIVATE); struct mutex *lock; }; +#define media_entity_to_video_device(__e) \ + container_of(__e, struct video_device, entity) /* dev to video-device */ #define to_video_device(cd) container_of(cd, struct video_device, dev) +int __must_check __video_register_device(struct video_device *vdev, int type, + int nr, int warn_if_nr_in_use, struct module *owner); + /* Register video devices. Note that if video_register_device fails, the release() callback of the video_device structure is *not* called, so the caller is responsible for freeing any data. Usually that means that you call video_device_release() on failure. */ -int __must_check video_register_device(struct video_device *vdev, int type, int nr); +static inline int __must_check video_register_device(struct video_device *vdev, + int type, int nr) +{ + return __video_register_device(vdev, type, nr, 1, vdev->fops->owner); +} /* Same as video_register_device, but no warning is issued if the desired device node number was already in use. */ -int __must_check video_register_device_no_warn(struct video_device *vdev, int type, int nr); +static inline int __must_check video_register_device_no_warn( + struct video_device *vdev, int type, int nr) +{ + return __video_register_device(vdev, type, nr, 0, vdev->fops->owner); +} /* Unregister video devices. Will do nothing if vdev == NULL or video_is_registered() returns false. */ @@ -128,6 +185,26 @@ void video_device_release(struct video_device *vdev); a dubious construction at best. */ void video_device_release_empty(struct video_device *vdev); +/* returns true if cmd is a known V4L2 ioctl */ +bool v4l2_is_known_ioctl(unsigned int cmd); + +/* mark that this command shouldn't use core locking */ +static inline void v4l2_disable_ioctl_locking(struct video_device *vdev, unsigned int cmd) +{ + if (_IOC_NR(cmd) < BASE_VIDIOC_PRIVATE) + set_bit(_IOC_NR(cmd), vdev->disable_locking); +} + +/* Mark that this command isn't implemented. This must be called before + video_device_register. See also the comments in determine_valid_ioctls(). + This function allows drivers to provide just one v4l2_ioctl_ops struct, but + disable ioctls based on the specific card that is actually found. */ +static inline void v4l2_disable_ioctl(struct video_device *vdev, unsigned int cmd) +{ + if (_IOC_NR(cmd) < BASE_VIDIOC_PRIVATE) + set_bit(_IOC_NR(cmd), vdev->valid_ioctls); +} + /* helper functions to access driver private data. */ static inline void *video_get_drvdata(struct video_device *vdev) { diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h index b16f307d471..ffb69da3ce9 100644 --- a/include/media/v4l2-device.h +++ b/include/media/v4l2-device.h @@ -21,7 +21,9 @@ #ifndef _V4L2_DEVICE_H #define _V4L2_DEVICE_H +#include <media/media-device.h> #include <media/v4l2-subdev.h> +#include <media/v4l2-dev.h> /* Each instance of a V4L2 device should create the v4l2_device struct, either stand-alone or embedded in a larger struct. @@ -39,6 +41,9 @@ struct v4l2_device { Note: dev might be NULL if there is no parent device as is the case with e.g. ISA devices. */ struct device *dev; +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_device *mdev; +#endif /* used to keep track of the registered subdevs */ struct list_head subdevs; /* lock this struct; can be used by the driver as well if this @@ -51,10 +56,23 @@ struct v4l2_device { unsigned int notification, void *arg); /* The control handler. May be NULL. */ struct v4l2_ctrl_handler *ctrl_handler; + /* Device's priority state */ + struct v4l2_prio_state prio; /* BKL replacement mutex. Temporary solution only. */ struct mutex ioctl_lock; + /* Keep track of the references to this struct. */ + struct kref ref; + /* Release function that is called when the ref count goes to 0. */ + void (*release)(struct v4l2_device *v4l2_dev); }; +static inline void v4l2_device_get(struct v4l2_device *v4l2_dev) +{ + kref_get(&v4l2_dev->ref); +} + +int v4l2_device_put(struct v4l2_device *v4l2_dev); + /* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev. dev may be NULL in rare cases (ISA devices). In that case you must fill in the v4l2_dev->name field before calling this function. */ @@ -96,6 +114,20 @@ int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, wasn't registered. In that case it will do nothing. */ void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); +/* Register device nodes for all subdev of the v4l2 device that are marked with + * the V4L2_SUBDEV_FL_HAS_DEVNODE flag. + */ +int __must_check +v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev); + +/* Send a notification to v4l2_device. */ +static inline void v4l2_subdev_notify(struct v4l2_subdev *sd, + unsigned int notification, void *arg) +{ + if (sd && sd->v4l2_dev && sd->v4l2_dev->notify) + sd->v4l2_dev->notify(sd, notification, arg); +} + /* Iterate over all subdevs. */ #define v4l2_device_for_each_subdev(sd, v4l2_dev) \ list_for_each_entry(sd, &(v4l2_dev)->subdevs, list) @@ -139,7 +171,7 @@ void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); ({ \ struct v4l2_subdev *__sd; \ __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, cond, o, \ - f, args...); \ + f , ##args); \ }) /* Call the specified callback for all subdevs matching grp_id (if 0, then @@ -166,4 +198,17 @@ void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); ##args); \ }) +#define v4l2_device_has_op(v4l2_dev, o, f) \ +({ \ + struct v4l2_subdev *__sd; \ + bool __result = false; \ + list_for_each_entry(__sd, &(v4l2_dev)->subdevs, list) { \ + if (v4l2_subdev_has_op(__sd, o, f)) { \ + __result = true; \ + break; \ + } \ + } \ + __result; \ +}) + #endif diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h new file mode 100644 index 00000000000..4becc671639 --- /dev/null +++ b/include/media/v4l2-dv-timings.h @@ -0,0 +1,161 @@ +/* + * v4l2-dv-timings - Internal header with dv-timings helper functions + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef __V4L2_DV_TIMINGS_H +#define __V4L2_DV_TIMINGS_H + +#include <linux/videodev2.h> + +/** v4l2_dv_timings_presets: list of all dv_timings presets. + */ +extern const struct v4l2_dv_timings v4l2_dv_timings_presets[]; + +/** v4l2_check_dv_timings_fnc - timings check callback + * @t: the v4l2_dv_timings struct. + * @handle: a handle from the driver. + * + * Returns true if the given timings are valid. + */ +typedef bool v4l2_check_dv_timings_fnc(const struct v4l2_dv_timings *t, void *handle); + +/** v4l2_valid_dv_timings() - are these timings valid? + * @t: the v4l2_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @fnc: callback to check if this timing is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * Returns true if the given dv_timings struct is supported by the + * hardware capabilities and the callback function (if non-NULL), returns + * false otherwise. + */ +bool v4l2_valid_dv_timings(const struct v4l2_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** v4l2_enum_dv_timings_cap() - Helper function to enumerate possible DV timings based on capabilities + * @t: the v4l2_enum_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @fnc: callback to check if this timing is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * This enumerates dv_timings using the full list of possible CEA-861 and DMT + * timings, filtering out any timings that are not supported based on the + * hardware capabilities and the callback function (if non-NULL). + * + * If a valid timing for the given index is found, it will fill in @t and + * return 0, otherwise it returns -EINVAL. + */ +int v4l2_enum_dv_timings_cap(struct v4l2_enum_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** v4l2_find_dv_timings_cap() - Find the closest timings struct + * @t: the v4l2_enum_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @pclock_delta: maximum delta between t->pixelclock and the timing struct + * under consideration. + * @fnc: callback to check if a given timings struct is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * This function tries to map the given timings to an entry in the + * full list of possible CEA-861 and DMT timings, filtering out any timings + * that are not supported based on the hardware capabilities and the callback + * function (if non-NULL). + * + * On success it will fill in @t with the found timings and it returns true. + * On failure it will return false. + */ +bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + unsigned pclock_delta, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** v4l2_match_dv_timings() - do two timings match? + * @measured: the measured timings data. + * @standard: the timings according to the standard. + * @pclock_delta: maximum delta in Hz between standard->pixelclock and + * the measured timings. + * + * Returns true if the two timings match, returns false otherwise. + */ +bool v4l2_match_dv_timings(const struct v4l2_dv_timings *measured, + const struct v4l2_dv_timings *standard, + unsigned pclock_delta); + +/** v4l2_print_dv_timings() - log the contents of a dv_timings struct + * @dev_prefix:device prefix for each log line. + * @prefix: additional prefix for each log line, may be NULL. + * @t: the timings data. + * @detailed: if true, give a detailed log. + */ +void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix, + const struct v4l2_dv_timings *t, bool detailed); + +/** v4l2_detect_cvt - detect if the given timings follow the CVT standard + * @frame_height - the total height of the frame (including blanking) in lines. + * @hfreq - the horizontal frequency in Hz. + * @vsync - the height of the vertical sync in lines. + * @polarities - the horizontal and vertical polarities (same as struct + * v4l2_bt_timings polarities). + * @fmt - the resulting timings. + * + * This function will attempt to detect if the given values correspond to a + * valid CVT format. If so, then it will return true, and fmt will be filled + * in with the found CVT timings. + */ +bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync, + u32 polarities, struct v4l2_dv_timings *fmt); + +/** v4l2_detect_gtf - detect if the given timings follow the GTF standard + * @frame_height - the total height of the frame (including blanking) in lines. + * @hfreq - the horizontal frequency in Hz. + * @vsync - the height of the vertical sync in lines. + * @polarities - the horizontal and vertical polarities (same as struct + * v4l2_bt_timings polarities). + * @aspect - preferred aspect ratio. GTF has no method of determining the + * aspect ratio in order to derive the image width from the + * image height, so it has to be passed explicitly. Usually + * the native screen aspect ratio is used for this. If it + * is not filled in correctly, then 16:9 will be assumed. + * @fmt - the resulting timings. + * + * This function will attempt to detect if the given values correspond to a + * valid GTF format. If so, then it will return true, and fmt will be filled + * in with the found GTF timings. + */ +bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync, + u32 polarities, struct v4l2_fract aspect, + struct v4l2_dv_timings *fmt); + +/** v4l2_calc_aspect_ratio - calculate the aspect ratio based on bytes + * 0x15 and 0x16 from the EDID. + * @hor_landscape - byte 0x15 from the EDID. + * @vert_portrait - byte 0x16 from the EDID. + * + * Determines the aspect ratio from the EDID. + * See VESA Enhanced EDID standard, release A, rev 2, section 3.6.2: + * "Horizontal and Vertical Screen Size or Aspect Ratio" + */ +struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait); + +#endif diff --git a/include/media/v4l2-event.h b/include/media/v4l2-event.h index 3b86177c8cd..1ab9045e52e 100644 --- a/include/media/v4l2-event.h +++ b/include/media/v4l2-event.h @@ -5,7 +5,7 @@ * * Copyright (C) 2009--2010 Nokia Corporation. * - * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * Contact: Sakari Ailus <sakari.ailus@iki.fi> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -29,39 +29,111 @@ #include <linux/videodev2.h> #include <linux/wait.h> +/* + * Overview: + * + * Events are subscribed per-filehandle. An event specification consists of a + * type and is optionally associated with an object identified through the + * 'id' field. So an event is uniquely identified by the (type, id) tuple. + * + * The v4l2-fh struct has a list of subscribed events. The v4l2_subscribed_event + * struct is added to that list, one for every subscribed event. + * + * Each v4l2_subscribed_event struct ends with an array of v4l2_kevent structs. + * This array (ringbuffer, really) is used to store any events raised by the + * driver. The v4l2_kevent struct links into the 'available' list of the + * v4l2_fh struct so VIDIOC_DQEVENT will know which event to dequeue first. + * + * Finally, if the event subscription is associated with a particular object + * such as a V4L2 control, then that object needs to know about that as well + * so that an event can be raised by that object. So the 'node' field can + * be used to link the v4l2_subscribed_event struct into a list of that + * object. + * + * So to summarize: + * + * struct v4l2_fh has two lists: one of the subscribed events, and one of the + * pending events. + * + * struct v4l2_subscribed_event has a ringbuffer of raised (pending) events of + * that particular type. + * + * If struct v4l2_subscribed_event is associated with a specific object, then + * that object will have an internal list of struct v4l2_subscribed_event so + * it knows who subscribed an event to that object. + */ + struct v4l2_fh; +struct v4l2_subdev; +struct v4l2_subscribed_event; struct video_device; +/** struct v4l2_kevent - Internal kernel event struct. + * @list: List node for the v4l2_fh->available list. + * @sev: Pointer to parent v4l2_subscribed_event. + * @event: The event itself. + */ struct v4l2_kevent { struct list_head list; + struct v4l2_subscribed_event *sev; struct v4l2_event event; }; +/** struct v4l2_subscribed_event_ops - Subscribed event operations. + * @add: Optional callback, called when a new listener is added + * @del: Optional callback, called when a listener stops listening + * @replace: Optional callback that can replace event 'old' with event 'new'. + * @merge: Optional callback that can merge event 'old' into event 'new'. + */ +struct v4l2_subscribed_event_ops { + int (*add)(struct v4l2_subscribed_event *sev, unsigned elems); + void (*del)(struct v4l2_subscribed_event *sev); + void (*replace)(struct v4l2_event *old, const struct v4l2_event *new); + void (*merge)(const struct v4l2_event *old, struct v4l2_event *new); +}; + +/** struct v4l2_subscribed_event - Internal struct representing a subscribed event. + * @list: List node for the v4l2_fh->subscribed list. + * @type: Event type. + * @id: Associated object ID (e.g. control ID). 0 if there isn't any. + * @flags: Copy of v4l2_event_subscription->flags. + * @fh: Filehandle that subscribed to this event. + * @node: List node that hooks into the object's event list (if there is one). + * @ops: v4l2_subscribed_event_ops + * @elems: The number of elements in the events array. + * @first: The index of the events containing the oldest available event. + * @in_use: The number of queued events. + * @events: An array of @elems events. + */ struct v4l2_subscribed_event { struct list_head list; u32 type; + u32 id; + u32 flags; + struct v4l2_fh *fh; + struct list_head node; + const struct v4l2_subscribed_event_ops *ops; + unsigned elems; + unsigned first; + unsigned in_use; + struct v4l2_kevent events[]; }; -struct v4l2_events { - wait_queue_head_t wait; - struct list_head subscribed; /* Subscribed events */ - struct list_head free; /* Events ready for use */ - struct list_head available; /* Dequeueable event */ - unsigned int navailable; - unsigned int nallocated; /* Number of allocated events */ - u32 sequence; -}; - -int v4l2_event_init(struct v4l2_fh *fh); -int v4l2_event_alloc(struct v4l2_fh *fh, unsigned int n); -void v4l2_event_free(struct v4l2_fh *fh); int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event, int nonblocking); void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev); +void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev); int v4l2_event_pending(struct v4l2_fh *fh); int v4l2_event_subscribe(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub); + const struct v4l2_event_subscription *sub, unsigned elems, + const struct v4l2_subscribed_event_ops *ops); int v4l2_event_unsubscribe(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub); - + const struct v4l2_event_subscription *sub); +void v4l2_event_unsubscribe_all(struct v4l2_fh *fh); +int v4l2_event_subdev_unsubscribe(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); +int v4l2_src_change_event_subscribe(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub); +int v4l2_src_change_event_subdev_subscribe(struct v4l2_subdev *sd, + struct v4l2_fh *fh, struct v4l2_event_subscription *sub); #endif /* V4L2_EVENT_H */ diff --git a/include/media/v4l2-fh.h b/include/media/v4l2-fh.h index 1d72dde320b..80351677516 100644 --- a/include/media/v4l2-fh.h +++ b/include/media/v4l2-fh.h @@ -6,7 +6,7 @@ * * Copyright (C) 2009--2010 Nokia Corporation. * - * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * Contact: Sakari Ailus <sakari.ailus@iki.fi> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -26,15 +26,29 @@ #ifndef V4L2_FH_H #define V4L2_FH_H +#include <linux/fs.h> #include <linux/list.h> +#include <linux/videodev2.h> struct video_device; -struct v4l2_events; +struct v4l2_ctrl_handler; struct v4l2_fh { struct list_head list; struct video_device *vdev; - struct v4l2_events *events; /* events, pending and subscribed */ + struct v4l2_ctrl_handler *ctrl_handler; + enum v4l2_priority prio; + + /* Events */ + wait_queue_head_t wait; + struct list_head subscribed; /* Subscribed events */ + struct list_head available; /* Dequeueable event */ + unsigned int navailable; + u32 sequence; + +#if IS_ENABLED(CONFIG_V4L2_MEM2MEM_DEV) + struct v4l2_m2m_ctx *m2m_ctx; +#endif }; /* @@ -43,15 +57,23 @@ struct v4l2_fh { * from driver's v4l2_file_operations->open() handler if the driver * uses v4l2_fh. */ -int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev); +void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev); /* * Add the fh to the list of file handles on a video_device. The file * handle must be initialised first. */ void v4l2_fh_add(struct v4l2_fh *fh); /* + * Can be used as the open() op of v4l2_file_operations. + * It allocates a v4l2_fh and inits and adds it to the video_device associated + * with the file pointer. + */ +int v4l2_fh_open(struct file *filp); +/* * Remove file handle from the list of file handles. Must be called in * v4l2_file_operations->release() handler if the driver uses v4l2_fh. + * On error filp->private_data will be NULL, otherwise it will point to + * the v4l2_fh struct. */ void v4l2_fh_del(struct v4l2_fh *fh); /* @@ -61,5 +83,25 @@ void v4l2_fh_del(struct v4l2_fh *fh); * driver uses v4l2_fh. */ void v4l2_fh_exit(struct v4l2_fh *fh); +/* + * Can be used as the release() op of v4l2_file_operations. + * It deletes and exits the v4l2_fh associated with the file pointer and + * frees it. It will do nothing if filp->private_data (the pointer to the + * v4l2_fh struct) is NULL. This function always returns 0. + */ +int v4l2_fh_release(struct file *filp); +/* + * Returns 1 if this filehandle is the only filehandle opened for the + * associated video_device. If fh is NULL, then it returns 0. + */ +int v4l2_fh_is_singular(struct v4l2_fh *fh); +/* + * Helper function with struct file as argument. If filp->private_data is + * NULL, then it will return 0. + */ +static inline int v4l2_fh_is_singular_file(struct file *filp) +{ + return v4l2_fh_is_singular(filp->private_data); +} #endif /* V4L2_EVENT_H */ diff --git a/include/media/v4l2-image-sizes.h b/include/media/v4l2-image-sizes.h new file mode 100644 index 00000000000..10daf92ff1a --- /dev/null +++ b/include/media/v4l2-image-sizes.h @@ -0,0 +1,34 @@ +/* + * Standard image size definitions + * + * Copyright (C) 2013, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _IMAGE_SIZES_H +#define _IMAGE_SIZES_H + +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 + +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 + +#define QQCIF_WIDTH 88 +#define QQCIF_HEIGHT 72 + +#define QQVGA_WIDTH 160 +#define QQVGA_HEIGHT 120 + +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 + +#define SXGA_WIDTH 1280 +#define SXGA_HEIGHT 1024 + +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 + +#endif /* _IMAGE_SIZES_H */ diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h deleted file mode 100644 index fbf58556157..00000000000 --- a/include/media/v4l2-int-device.h +++ /dev/null @@ -1,307 +0,0 @@ -/* - * include/media/v4l2-int-device.h - * - * V4L2 internal ioctl interface. - * - * Copyright (C) 2007 Nokia Corporation. - * - * Contact: Sakari Ailus <sakari.ailus@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef V4L2_INT_DEVICE_H -#define V4L2_INT_DEVICE_H - -#include <linux/module.h> -#include <media/v4l2-common.h> - -#define V4L2NAMESIZE 32 - -/* - * - * The internal V4L2 device interface core. - * - */ - -enum v4l2_int_type { - v4l2_int_type_master = 1, - v4l2_int_type_slave -}; - -struct v4l2_int_device; - -struct v4l2_int_master { - int (*attach)(struct v4l2_int_device *slave); - void (*detach)(struct v4l2_int_device *slave); -}; - -typedef int (v4l2_int_ioctl_func)(struct v4l2_int_device *); -typedef int (v4l2_int_ioctl_func_0)(struct v4l2_int_device *); -typedef int (v4l2_int_ioctl_func_1)(struct v4l2_int_device *, void *); - -struct v4l2_int_ioctl_desc { - int num; - v4l2_int_ioctl_func *func; -}; - -struct v4l2_int_slave { - /* Don't touch master. */ - struct v4l2_int_device *master; - - char attach_to[V4L2NAMESIZE]; - - int num_ioctls; - struct v4l2_int_ioctl_desc *ioctls; -}; - -struct v4l2_int_device { - /* Don't touch head. */ - struct list_head head; - - struct module *module; - - char name[V4L2NAMESIZE]; - - enum v4l2_int_type type; - union { - struct v4l2_int_master *master; - struct v4l2_int_slave *slave; - } u; - - void *priv; -}; - -void v4l2_int_device_try_attach_all(void); - -int v4l2_int_device_register(struct v4l2_int_device *d); -void v4l2_int_device_unregister(struct v4l2_int_device *d); - -int v4l2_int_ioctl_0(struct v4l2_int_device *d, int cmd); -int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg); - -/* - * - * Types and definitions for IOCTL commands. - * - */ - -enum v4l2_power { - V4L2_POWER_OFF = 0, - V4L2_POWER_ON, - V4L2_POWER_STANDBY, -}; - -/* Slave interface type. */ -enum v4l2_if_type { - /* - * Parallel 8-, 10- or 12-bit interface, used by for example - * on certain image sensors. - */ - V4L2_IF_TYPE_BT656, -}; - -enum v4l2_if_type_bt656_mode { - /* - * Modes without Bt synchronisation codes. Separate - * synchronisation signal lines are used. - */ - V4L2_IF_TYPE_BT656_MODE_NOBT_8BIT, - V4L2_IF_TYPE_BT656_MODE_NOBT_10BIT, - V4L2_IF_TYPE_BT656_MODE_NOBT_12BIT, - /* - * Use Bt synchronisation codes. The vertical and horizontal - * synchronisation is done based on synchronisation codes. - */ - V4L2_IF_TYPE_BT656_MODE_BT_8BIT, - V4L2_IF_TYPE_BT656_MODE_BT_10BIT, -}; - -struct v4l2_if_type_bt656 { - /* - * 0: Frame begins when vsync is high. - * 1: Frame begins when vsync changes from low to high. - */ - unsigned frame_start_on_rising_vs:1; - /* Use Bt synchronisation codes for sync correction. */ - unsigned bt_sync_correct:1; - /* Swap every two adjacent image data elements. */ - unsigned swap:1; - /* Inverted latch clock polarity from slave. */ - unsigned latch_clk_inv:1; - /* Hs polarity. 0 is active high, 1 active low. */ - unsigned nobt_hs_inv:1; - /* Vs polarity. 0 is active high, 1 active low. */ - unsigned nobt_vs_inv:1; - enum v4l2_if_type_bt656_mode mode; - /* Minimum accepted bus clock for slave (in Hz). */ - u32 clock_min; - /* Maximum accepted bus clock for slave. */ - u32 clock_max; - /* - * Current wish of the slave. May only change in response to - * ioctls that affect image capture. - */ - u32 clock_curr; -}; - -struct v4l2_ifparm { - enum v4l2_if_type if_type; - union { - struct v4l2_if_type_bt656 bt656; - } u; -}; - -/* IOCTL command numbers. */ -enum v4l2_int_ioctl_num { - /* - * - * "Proper" V4L ioctls, as in struct video_device. - * - */ - vidioc_int_enum_fmt_cap_num = 1, - vidioc_int_g_fmt_cap_num, - vidioc_int_s_fmt_cap_num, - vidioc_int_try_fmt_cap_num, - vidioc_int_queryctrl_num, - vidioc_int_g_ctrl_num, - vidioc_int_s_ctrl_num, - vidioc_int_cropcap_num, - vidioc_int_g_crop_num, - vidioc_int_s_crop_num, - vidioc_int_g_parm_num, - vidioc_int_s_parm_num, - vidioc_int_querystd_num, - vidioc_int_s_std_num, - vidioc_int_s_video_routing_num, - - /* - * - * Strictly internal ioctls. - * - */ - /* Initialise the device when slave attaches to the master. */ - vidioc_int_dev_init_num = 1000, - /* Delinitialise the device at slave detach. */ - vidioc_int_dev_exit_num, - /* Set device power state. */ - vidioc_int_s_power_num, - /* - * Get slave private data, e.g. platform-specific slave - * configuration used by the master. - */ - vidioc_int_g_priv_num, - /* Get slave interface parameters. */ - vidioc_int_g_ifparm_num, - /* Does the slave need to be reset after VIDIOC_DQBUF? */ - vidioc_int_g_needs_reset_num, - vidioc_int_enum_framesizes_num, - vidioc_int_enum_frameintervals_num, - - /* - * - * VIDIOC_INT_* ioctls. - * - */ - /* VIDIOC_INT_RESET */ - vidioc_int_reset_num, - /* VIDIOC_INT_INIT */ - vidioc_int_init_num, - /* VIDIOC_DBG_G_CHIP_IDENT */ - vidioc_int_g_chip_ident_num, - - /* - * - * Start of private ioctls. - * - */ - vidioc_int_priv_start_num = 2000, -}; - -/* - * - * IOCTL wrapper functions for better type checking. - * - */ - -#define V4L2_INT_WRAPPER_0(name) \ - static inline int vidioc_int_##name(struct v4l2_int_device *d) \ - { \ - return v4l2_int_ioctl_0(d, vidioc_int_##name##_num); \ - } \ - \ - static inline struct v4l2_int_ioctl_desc \ - vidioc_int_##name##_cb(int (*func) \ - (struct v4l2_int_device *)) \ - { \ - struct v4l2_int_ioctl_desc desc; \ - \ - desc.num = vidioc_int_##name##_num; \ - desc.func = (v4l2_int_ioctl_func *)func; \ - \ - return desc; \ - } - -#define V4L2_INT_WRAPPER_1(name, arg_type, asterisk) \ - static inline int vidioc_int_##name(struct v4l2_int_device *d, \ - arg_type asterisk arg) \ - { \ - return v4l2_int_ioctl_1(d, vidioc_int_##name##_num, \ - (void *)(unsigned long)arg); \ - } \ - \ - static inline struct v4l2_int_ioctl_desc \ - vidioc_int_##name##_cb(int (*func) \ - (struct v4l2_int_device *, \ - arg_type asterisk)) \ - { \ - struct v4l2_int_ioctl_desc desc; \ - \ - desc.num = vidioc_int_##name##_num; \ - desc.func = (v4l2_int_ioctl_func *)func; \ - \ - return desc; \ - } - -V4L2_INT_WRAPPER_1(enum_fmt_cap, struct v4l2_fmtdesc, *); -V4L2_INT_WRAPPER_1(g_fmt_cap, struct v4l2_format, *); -V4L2_INT_WRAPPER_1(s_fmt_cap, struct v4l2_format, *); -V4L2_INT_WRAPPER_1(try_fmt_cap, struct v4l2_format, *); -V4L2_INT_WRAPPER_1(queryctrl, struct v4l2_queryctrl, *); -V4L2_INT_WRAPPER_1(g_ctrl, struct v4l2_control, *); -V4L2_INT_WRAPPER_1(s_ctrl, struct v4l2_control, *); -V4L2_INT_WRAPPER_1(cropcap, struct v4l2_cropcap, *); -V4L2_INT_WRAPPER_1(g_crop, struct v4l2_crop, *); -V4L2_INT_WRAPPER_1(s_crop, struct v4l2_crop, *); -V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *); -V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *); -V4L2_INT_WRAPPER_1(querystd, v4l2_std_id, *); -V4L2_INT_WRAPPER_1(s_std, v4l2_std_id, *); -V4L2_INT_WRAPPER_1(s_video_routing, struct v4l2_routing, *); - -V4L2_INT_WRAPPER_0(dev_init); -V4L2_INT_WRAPPER_0(dev_exit); -V4L2_INT_WRAPPER_1(s_power, enum v4l2_power, ); -V4L2_INT_WRAPPER_1(g_priv, void, *); -V4L2_INT_WRAPPER_1(g_ifparm, struct v4l2_ifparm, *); -V4L2_INT_WRAPPER_1(g_needs_reset, void, *); -V4L2_INT_WRAPPER_1(enum_framesizes, struct v4l2_frmsizeenum, *); -V4L2_INT_WRAPPER_1(enum_frameintervals, struct v4l2_frmivalenum, *); - -V4L2_INT_WRAPPER_0(reset); -V4L2_INT_WRAPPER_0(init); -V4L2_INT_WRAPPER_1(g_chip_ident, int, *); - -#endif diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index 67df37542c6..50cf7c110a7 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -11,7 +11,6 @@ #include <linux/poll.h> #include <linux/fs.h> -#include <linux/device.h> #include <linux/mutex.h> #include <linux/compiler.h> /* need __user */ #include <linux/videodev2.h> @@ -37,7 +36,11 @@ struct v4l2_ioctl_ops { struct v4l2_fmtdesc *f); int (*vidioc_enum_fmt_vid_out) (struct file *file, void *fh, struct v4l2_fmtdesc *f); - int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh, + int (*vidioc_enum_fmt_vid_cap_mplane)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_vid_out_mplane)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_sdr_cap) (struct file *file, void *fh, struct v4l2_fmtdesc *f); /* VIDIOC_G_FMT handlers */ @@ -57,7 +60,11 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_g_fmt_sliced_vbi_out)(struct file *file, void *fh, struct v4l2_format *f); - int (*vidioc_g_fmt_type_private)(struct file *file, void *fh, + int (*vidioc_g_fmt_vid_cap_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_vid_out_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_sdr_cap) (struct file *file, void *fh, struct v4l2_format *f); /* VIDIOC_S_FMT handlers */ @@ -77,7 +84,11 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_s_fmt_sliced_vbi_out)(struct file *file, void *fh, struct v4l2_format *f); - int (*vidioc_s_fmt_type_private)(struct file *file, void *fh, + int (*vidioc_s_fmt_vid_cap_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_vid_out_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_sdr_cap) (struct file *file, void *fh, struct v4l2_format *f); /* VIDIOC_TRY_FMT handlers */ @@ -97,21 +108,29 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_try_fmt_sliced_vbi_out)(struct file *file, void *fh, struct v4l2_format *f); - int (*vidioc_try_fmt_type_private)(struct file *file, void *fh, + int (*vidioc_try_fmt_vid_cap_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_vid_out_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_sdr_cap) (struct file *file, void *fh, struct v4l2_format *f); /* Buffer handlers */ int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b); int (*vidioc_querybuf)(struct file *file, void *fh, struct v4l2_buffer *b); int (*vidioc_qbuf) (struct file *file, void *fh, struct v4l2_buffer *b); + int (*vidioc_expbuf) (struct file *file, void *fh, + struct v4l2_exportbuffer *e); int (*vidioc_dqbuf) (struct file *file, void *fh, struct v4l2_buffer *b); + int (*vidioc_create_bufs)(struct file *file, void *fh, struct v4l2_create_buffers *b); + int (*vidioc_prepare_buf)(struct file *file, void *fh, struct v4l2_buffer *b); int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i); int (*vidioc_g_fbuf) (struct file *file, void *fh, struct v4l2_framebuffer *a); int (*vidioc_s_fbuf) (struct file *file, void *fh, - struct v4l2_framebuffer *a); + const struct v4l2_framebuffer *a); /* Stream on/off */ int (*vidioc_streamon) (struct file *file, void *fh, enum v4l2_buf_type i); @@ -121,7 +140,7 @@ struct v4l2_ioctl_ops { ENUMSTD is handled by videodev.c */ int (*vidioc_g_std) (struct file *file, void *fh, v4l2_std_id *norm); - int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm); + int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id norm); int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a); /* Input handling */ @@ -158,7 +177,7 @@ struct v4l2_ioctl_ops { int (*vidioc_g_audio) (struct file *file, void *fh, struct v4l2_audio *a); int (*vidioc_s_audio) (struct file *file, void *fh, - struct v4l2_audio *a); + const struct v4l2_audio *a); /* Audio out ioctls */ int (*vidioc_enumaudout) (struct file *file, void *fh, @@ -166,29 +185,37 @@ struct v4l2_ioctl_ops { int (*vidioc_g_audout) (struct file *file, void *fh, struct v4l2_audioout *a); int (*vidioc_s_audout) (struct file *file, void *fh, - struct v4l2_audioout *a); + const struct v4l2_audioout *a); int (*vidioc_g_modulator) (struct file *file, void *fh, struct v4l2_modulator *a); int (*vidioc_s_modulator) (struct file *file, void *fh, - struct v4l2_modulator *a); + const struct v4l2_modulator *a); /* Crop ioctls */ int (*vidioc_cropcap) (struct file *file, void *fh, struct v4l2_cropcap *a); int (*vidioc_g_crop) (struct file *file, void *fh, struct v4l2_crop *a); int (*vidioc_s_crop) (struct file *file, void *fh, - struct v4l2_crop *a); + const struct v4l2_crop *a); + int (*vidioc_g_selection) (struct file *file, void *fh, + struct v4l2_selection *s); + int (*vidioc_s_selection) (struct file *file, void *fh, + struct v4l2_selection *s); /* Compression ioctls */ int (*vidioc_g_jpegcomp) (struct file *file, void *fh, struct v4l2_jpegcompression *a); int (*vidioc_s_jpegcomp) (struct file *file, void *fh, - struct v4l2_jpegcompression *a); + const struct v4l2_jpegcompression *a); int (*vidioc_g_enc_index) (struct file *file, void *fh, struct v4l2_enc_idx *a); int (*vidioc_encoder_cmd) (struct file *file, void *fh, struct v4l2_encoder_cmd *a); int (*vidioc_try_encoder_cmd) (struct file *file, void *fh, struct v4l2_encoder_cmd *a); + int (*vidioc_decoder_cmd) (struct file *file, void *fh, + struct v4l2_decoder_cmd *a); + int (*vidioc_try_decoder_cmd) (struct file *file, void *fh, + struct v4l2_decoder_cmd *a); /* Stream type-dependent parameter ioctls */ int (*vidioc_g_parm) (struct file *file, void *fh, @@ -200,11 +227,13 @@ struct v4l2_ioctl_ops { int (*vidioc_g_tuner) (struct file *file, void *fh, struct v4l2_tuner *a); int (*vidioc_s_tuner) (struct file *file, void *fh, - struct v4l2_tuner *a); + const struct v4l2_tuner *a); int (*vidioc_g_frequency) (struct file *file, void *fh, struct v4l2_frequency *a); int (*vidioc_s_frequency) (struct file *file, void *fh, - struct v4l2_frequency *a); + const struct v4l2_frequency *a); + int (*vidioc_enum_freq_bands) (struct file *file, void *fh, + struct v4l2_frequency_band *band); /* Sliced VBI cap */ int (*vidioc_g_sliced_vbi_cap) (struct file *file, void *fh, @@ -214,17 +243,18 @@ struct v4l2_ioctl_ops { int (*vidioc_log_status) (struct file *file, void *fh); int (*vidioc_s_hw_freq_seek) (struct file *file, void *fh, - struct v4l2_hw_freq_seek *a); + const struct v4l2_hw_freq_seek *a); /* Debugging ioctls */ #ifdef CONFIG_VIDEO_ADV_DEBUG int (*vidioc_g_register) (struct file *file, void *fh, struct v4l2_dbg_register *reg); int (*vidioc_s_register) (struct file *file, void *fh, - struct v4l2_dbg_register *reg); + const struct v4l2_dbg_register *reg); + + int (*vidioc_g_chip_info) (struct file *file, void *fh, + struct v4l2_dbg_chip_info *chip); #endif - int (*vidioc_g_chip_ident) (struct file *file, void *fh, - struct v4l2_dbg_chip_ident *chip); int (*vidioc_enum_framesizes) (struct file *file, void *fh, struct v4l2_frmsizeenum *fsize); @@ -233,28 +263,27 @@ struct v4l2_ioctl_ops { struct v4l2_frmivalenum *fival); /* DV Timings IOCTLs */ - int (*vidioc_enum_dv_presets) (struct file *file, void *fh, - struct v4l2_dv_enum_preset *preset); - - int (*vidioc_s_dv_preset) (struct file *file, void *fh, - struct v4l2_dv_preset *preset); - int (*vidioc_g_dv_preset) (struct file *file, void *fh, - struct v4l2_dv_preset *preset); - int (*vidioc_query_dv_preset) (struct file *file, void *fh, - struct v4l2_dv_preset *qpreset); int (*vidioc_s_dv_timings) (struct file *file, void *fh, struct v4l2_dv_timings *timings); int (*vidioc_g_dv_timings) (struct file *file, void *fh, struct v4l2_dv_timings *timings); + int (*vidioc_query_dv_timings) (struct file *file, void *fh, + struct v4l2_dv_timings *timings); + int (*vidioc_enum_dv_timings) (struct file *file, void *fh, + struct v4l2_enum_dv_timings *timings); + int (*vidioc_dv_timings_cap) (struct file *file, void *fh, + struct v4l2_dv_timings_cap *cap); + int (*vidioc_g_edid) (struct file *file, void *fh, struct v4l2_edid *edid); + int (*vidioc_s_edid) (struct file *file, void *fh, struct v4l2_edid *edid); int (*vidioc_subscribe_event) (struct v4l2_fh *fh, - struct v4l2_event_subscription *sub); + const struct v4l2_event_subscription *sub); int (*vidioc_unsubscribe_event)(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub); + const struct v4l2_event_subscription *sub); /* For other private ioctls */ long (*vidioc_default) (struct file *file, void *fh, - int cmd, void *arg); + bool valid_prio, unsigned int cmd, void *arg); }; @@ -264,28 +293,19 @@ struct v4l2_ioctl_ops { #define V4L2_DEBUG_IOCTL 0x01 #define V4L2_DEBUG_IOCTL_ARG 0x02 -/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */ -#define v4l_print_ioctl(name, cmd) \ - do { \ - printk(KERN_DEBUG "%s: ", name); \ - v4l_printk_ioctl(cmd); \ - } while (0) - -/* Use this macro in I2C drivers where 'client' is the struct i2c_client - pointer */ -#define v4l_i2c_print_ioctl(client, cmd) \ - do { \ - v4l_client_printk(KERN_DEBUG, client, ""); \ - v4l_printk_ioctl(cmd); \ - } while (0) - /* Video standard functions */ extern const char *v4l2_norm_to_name(v4l2_std_id id); extern void v4l2_video_std_frame_period(int id, struct v4l2_fract *frameperiod); extern int v4l2_video_std_construct(struct v4l2_standard *vs, int id, const char *name); -/* Prints the ioctl in a human-readable format */ -extern void v4l_printk_ioctl(unsigned int cmd); +/* Prints the ioctl in a human-readable format. If prefix != NULL, + then do printk(KERN_DEBUG "%s: ", prefix) first. */ +extern void v4l_printk_ioctl(const char *prefix, unsigned int cmd); + +/* Internal use only: get the mutex (if any) that we need to lock for the + given command. */ +struct video_device; +extern struct mutex *v4l2_ioctl_get_lock(struct video_device *vdev, unsigned cmd); /* names for fancy debug output */ extern const char *v4l2_field_names[]; diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h index 8e6559838ae..395c4a95a42 100644 --- a/include/media/v4l2-mediabus.h +++ b/include/media/v4l2-mediabus.h @@ -11,65 +11,80 @@ #ifndef V4L2_MEDIABUS_H #define V4L2_MEDIABUS_H +#include <linux/v4l2-mediabus.h> + +/* Parallel flags */ +/* + * Can the client run in master or in slave mode. By "Master mode" an operation + * mode is meant, when the client (e.g., a camera sensor) is producing + * horizontal and vertical synchronisation. In "Slave mode" the host is + * providing these signals to the slave. + */ +#define V4L2_MBUS_MASTER (1 << 0) +#define V4L2_MBUS_SLAVE (1 << 1) /* - * These pixel codes uniquely identify data formats on the media bus. Mostly - * they correspond to similarly named V4L2_PIX_FMT_* formats, format 0 is - * reserved, V4L2_MBUS_FMT_FIXED shall be used by host-client pairs, where the - * data format is fixed. Additionally, "2X8" means that one pixel is transferred - * in two 8-bit samples, "BE" or "LE" specify in which order those samples are - * transferred over the bus: "LE" means that the least significant bits are - * transferred first, "BE" means that the most significant bits are transferred - * first, and "PADHI" and "PADLO" define which bits - low or high, in the - * incomplete high byte, are filled with padding bits. + * Signal polarity flags + * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused + * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying + * configuration of hardware that uses [HV]REF signals + */ +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2) +#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3) +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4) +#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5) +#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6) +#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7) +#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8) +#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9) +/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */ +#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10) +/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */ +#define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11) +/* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */ +#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH (1 << 12) +#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW (1 << 13) + +/* Serial flags */ +/* How many lanes the client can use */ +#define V4L2_MBUS_CSI2_1_LANE (1 << 0) +#define V4L2_MBUS_CSI2_2_LANE (1 << 1) +#define V4L2_MBUS_CSI2_3_LANE (1 << 2) +#define V4L2_MBUS_CSI2_4_LANE (1 << 3) +/* On which channels it can send video data */ +#define V4L2_MBUS_CSI2_CHANNEL_0 (1 << 4) +#define V4L2_MBUS_CSI2_CHANNEL_1 (1 << 5) +#define V4L2_MBUS_CSI2_CHANNEL_2 (1 << 6) +#define V4L2_MBUS_CSI2_CHANNEL_3 (1 << 7) +/* Does it support only continuous or also non-continuous clock mode */ +#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK (1 << 8) +#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK (1 << 9) + +#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \ + V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE) +#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \ + V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3) + +/** + * v4l2_mbus_type - media bus type + * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync + * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can + * also be used for BT.1120 + * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface */ -enum v4l2_mbus_pixelcode { - V4L2_MBUS_FMT_FIXED = 1, - V4L2_MBUS_FMT_YUYV8_2X8, - V4L2_MBUS_FMT_YVYU8_2X8, - V4L2_MBUS_FMT_UYVY8_2X8, - V4L2_MBUS_FMT_VYUY8_2X8, - V4L2_MBUS_FMT_YVYU10_2X10, - V4L2_MBUS_FMT_YUYV10_2X10, - V4L2_MBUS_FMT_YVYU10_1X20, - V4L2_MBUS_FMT_YUYV10_1X20, - V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, - V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE, - V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, - V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, - V4L2_MBUS_FMT_RGB565_2X8_LE, - V4L2_MBUS_FMT_RGB565_2X8_BE, - V4L2_MBUS_FMT_BGR565_2X8_LE, - V4L2_MBUS_FMT_BGR565_2X8_BE, - V4L2_MBUS_FMT_SBGGR8_1X8, - V4L2_MBUS_FMT_SBGGR10_1X10, - V4L2_MBUS_FMT_GREY8_1X8, - V4L2_MBUS_FMT_Y10_1X10, - V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, - V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE, - V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE, - V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE, - V4L2_MBUS_FMT_SGRBG8_1X8, - V4L2_MBUS_FMT_SBGGR12_1X12, - V4L2_MBUS_FMT_YUYV8_1_5X8, - V4L2_MBUS_FMT_YVYU8_1_5X8, - V4L2_MBUS_FMT_UYVY8_1_5X8, - V4L2_MBUS_FMT_VYUY8_1_5X8, +enum v4l2_mbus_type { + V4L2_MBUS_PARALLEL, + V4L2_MBUS_BT656, + V4L2_MBUS_CSI2, }; /** - * struct v4l2_mbus_framefmt - frame format on the media bus - * @width: frame width - * @height: frame height - * @code: data format code - * @field: used interlacing type - * @colorspace: colorspace of the data + * v4l2_mbus_config - media bus configuration + * @type: in: interface type + * @flags: in / out: configuration flags, depending on @type */ -struct v4l2_mbus_framefmt { - __u32 width; - __u32 height; - enum v4l2_mbus_pixelcode code; - enum v4l2_field field; - enum v4l2_colorspace colorspace; +struct v4l2_mbus_config { + enum v4l2_mbus_type type; + unsigned int flags; }; static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt, diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index 8d149f1c58d..12ea5a6a433 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -5,7 +5,7 @@ * and destination. * * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * Pawel Osciak, <p.osciak@samsung.com> + * Pawel Osciak, <pawel@osciak.com> * Marek Szyprowski, <m.szyprowski@samsung.com> * * This program is free software; you can redistribute it and/or modify @@ -17,7 +17,7 @@ #ifndef _MEDIA_V4L2_MEM2MEM_H #define _MEDIA_V4L2_MEM2MEM_H -#include <media/videobuf-core.h> +#include <media/videobuf2-core.h> /** * struct v4l2_m2m_ops - mem-to-mem device driver callbacks @@ -45,21 +45,28 @@ struct v4l2_m2m_ops { void (*device_run)(void *priv); int (*job_ready)(void *priv); void (*job_abort)(void *priv); + void (*lock)(void *priv); + void (*unlock)(void *priv); }; struct v4l2_m2m_dev; struct v4l2_m2m_queue_ctx { /* private: internal use only */ - struct videobuf_queue q; + struct vb2_queue q; /* Queue for buffers ready to be processed as soon as this * instance receives access to the device */ struct list_head rdy_queue; + spinlock_t rdy_spinlock; u8 num_rdy; + bool buffered; }; struct v4l2_m2m_ctx { + /* optional cap/out vb2 queues lock */ + struct mutex *q_lock; + /* private: internal use only */ struct v4l2_m2m_dev *m2m_dev; @@ -72,19 +79,31 @@ struct v4l2_m2m_ctx { /* For device job queue */ struct list_head queue; unsigned long job_flags; + wait_queue_head_t finished; /* Instance private data */ void *priv; }; +struct v4l2_m2m_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + void *v4l2_m2m_get_curr_priv(struct v4l2_m2m_dev *m2m_dev); -struct videobuf_queue *v4l2_m2m_get_vq(struct v4l2_m2m_ctx *m2m_ctx, +struct vb2_queue *v4l2_m2m_get_vq(struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type); void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev, struct v4l2_m2m_ctx *m2m_ctx); +static inline void +v4l2_m2m_buf_done(struct vb2_buffer *buf, enum vb2_buffer_state state) +{ + vb2_buffer_done(buf, state); +} + int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_requestbuffers *reqbufs); @@ -95,6 +114,11 @@ int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create); + +int v4l2_m2m_expbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_exportbuffer *eb); int v4l2_m2m_streamon(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type); @@ -107,16 +131,28 @@ unsigned int v4l2_m2m_poll(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, int v4l2_m2m_mmap(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct vm_area_struct *vma); -struct v4l2_m2m_dev *v4l2_m2m_init(struct v4l2_m2m_ops *m2m_ops); +struct v4l2_m2m_dev *v4l2_m2m_init(const struct v4l2_m2m_ops *m2m_ops); void v4l2_m2m_release(struct v4l2_m2m_dev *m2m_dev); -struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(void *priv, struct v4l2_m2m_dev *m2m_dev, - void (*vq_init)(void *priv, struct videobuf_queue *, - enum v4l2_buf_type)); +struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, + void *drv_priv, + int (*queue_init)(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)); + +static inline void v4l2_m2m_set_src_buffered(struct v4l2_m2m_ctx *m2m_ctx, + bool buffered) +{ + m2m_ctx->out_q_ctx.buffered = buffered; +} + +static inline void v4l2_m2m_set_dst_buffered(struct v4l2_m2m_ctx *m2m_ctx, + bool buffered) +{ + m2m_ctx->cap_q_ctx.buffered = buffered; +} + void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx); -void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct videobuf_queue *vq, - struct videobuf_buffer *vb); +void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct vb2_buffer *vb); /** * v4l2_m2m_num_src_bufs_ready() - return the number of source buffers ready for @@ -125,7 +161,7 @@ void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct videobuf_queue *vq, static inline unsigned int v4l2_m2m_num_src_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx) { - return m2m_ctx->cap_q_ctx.num_rdy; + return m2m_ctx->out_q_ctx.num_rdy; } /** @@ -135,10 +171,10 @@ unsigned int v4l2_m2m_num_src_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx) static inline unsigned int v4l2_m2m_num_dst_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx) { - return m2m_ctx->out_q_ctx.num_rdy; + return m2m_ctx->cap_q_ctx.num_rdy; } -void *v4l2_m2m_next_buf(struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type); +void *v4l2_m2m_next_buf(struct v4l2_m2m_queue_ctx *q_ctx); /** * v4l2_m2m_next_src_buf() - return next source buffer from the list of ready @@ -146,7 +182,7 @@ void *v4l2_m2m_next_buf(struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type); */ static inline void *v4l2_m2m_next_src_buf(struct v4l2_m2m_ctx *m2m_ctx) { - return v4l2_m2m_next_buf(m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + return v4l2_m2m_next_buf(&m2m_ctx->out_q_ctx); } /** @@ -155,29 +191,28 @@ static inline void *v4l2_m2m_next_src_buf(struct v4l2_m2m_ctx *m2m_ctx) */ static inline void *v4l2_m2m_next_dst_buf(struct v4l2_m2m_ctx *m2m_ctx) { - return v4l2_m2m_next_buf(m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + return v4l2_m2m_next_buf(&m2m_ctx->cap_q_ctx); } /** - * v4l2_m2m_get_src_vq() - return videobuf_queue for source buffers + * v4l2_m2m_get_src_vq() - return vb2_queue for source buffers */ static inline -struct videobuf_queue *v4l2_m2m_get_src_vq(struct v4l2_m2m_ctx *m2m_ctx) +struct vb2_queue *v4l2_m2m_get_src_vq(struct v4l2_m2m_ctx *m2m_ctx) { - return v4l2_m2m_get_vq(m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + return &m2m_ctx->out_q_ctx.q; } /** - * v4l2_m2m_get_dst_vq() - return videobuf_queue for destination buffers + * v4l2_m2m_get_dst_vq() - return vb2_queue for destination buffers */ static inline -struct videobuf_queue *v4l2_m2m_get_dst_vq(struct v4l2_m2m_ctx *m2m_ctx) +struct vb2_queue *v4l2_m2m_get_dst_vq(struct v4l2_m2m_ctx *m2m_ctx) { - return v4l2_m2m_get_vq(m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + return &m2m_ctx->cap_q_ctx.q; } -void *v4l2_m2m_buf_remove(struct v4l2_m2m_ctx *m2m_ctx, - enum v4l2_buf_type type); +void *v4l2_m2m_buf_remove(struct v4l2_m2m_queue_ctx *q_ctx); /** * v4l2_m2m_src_buf_remove() - take off a source buffer from the list of ready @@ -185,7 +220,7 @@ void *v4l2_m2m_buf_remove(struct v4l2_m2m_ctx *m2m_ctx, */ static inline void *v4l2_m2m_src_buf_remove(struct v4l2_m2m_ctx *m2m_ctx) { - return v4l2_m2m_buf_remove(m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + return v4l2_m2m_buf_remove(&m2m_ctx->out_q_ctx); } /** @@ -194,8 +229,29 @@ static inline void *v4l2_m2m_src_buf_remove(struct v4l2_m2m_ctx *m2m_ctx) */ static inline void *v4l2_m2m_dst_buf_remove(struct v4l2_m2m_ctx *m2m_ctx) { - return v4l2_m2m_buf_remove(m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + return v4l2_m2m_buf_remove(&m2m_ctx->cap_q_ctx); } +/* v4l2 ioctl helpers */ + +int v4l2_m2m_ioctl_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *rb); +int v4l2_m2m_ioctl_create_bufs(struct file *file, void *fh, + struct v4l2_create_buffers *create); +int v4l2_m2m_ioctl_querybuf(struct file *file, void *fh, + struct v4l2_buffer *buf); +int v4l2_m2m_ioctl_expbuf(struct file *file, void *fh, + struct v4l2_exportbuffer *eb); +int v4l2_m2m_ioctl_qbuf(struct file *file, void *fh, + struct v4l2_buffer *buf); +int v4l2_m2m_ioctl_dqbuf(struct file *file, void *fh, + struct v4l2_buffer *buf); +int v4l2_m2m_ioctl_streamon(struct file *file, void *fh, + enum v4l2_buf_type type); +int v4l2_m2m_ioctl_streamoff(struct file *file, void *fh, + enum v4l2_buf_type type); +int v4l2_m2m_fop_mmap(struct file *file, struct vm_area_struct *vma); +unsigned int v4l2_m2m_fop_poll(struct file *file, poll_table *wait); + #endif /* _MEDIA_V4L2_MEM2MEM_H */ diff --git a/include/media/v4l2-of.h b/include/media/v4l2-of.h new file mode 100644 index 00000000000..70fa7b7b048 --- /dev/null +++ b/include/media/v4l2-of.h @@ -0,0 +1,82 @@ +/* + * V4L2 OF binding parsing library + * + * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Copyright (C) 2012 Renesas Electronics Corp. + * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ +#ifndef _V4L2_OF_H +#define _V4L2_OF_H + +#include <linux/list.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/of_graph.h> + +#include <media/v4l2-mediabus.h> + +struct device_node; + +/** + * struct v4l2_of_bus_mipi_csi2 - MIPI CSI-2 bus data structure + * @flags: media bus (V4L2_MBUS_*) flags + * @data_lanes: an array of physical data lane indexes + * @clock_lane: physical lane index of the clock lane + * @num_data_lanes: number of data lanes + */ +struct v4l2_of_bus_mipi_csi2 { + unsigned int flags; + unsigned char data_lanes[4]; + unsigned char clock_lane; + unsigned short num_data_lanes; +}; + +/** + * struct v4l2_of_bus_parallel - parallel data bus data structure + * @flags: media bus (V4L2_MBUS_*) flags + * @bus_width: bus width in bits + * @data_shift: data shift in bits + */ +struct v4l2_of_bus_parallel { + unsigned int flags; + unsigned char bus_width; + unsigned char data_shift; +}; + +/** + * struct v4l2_of_endpoint - the endpoint data structure + * @base: struct of_endpoint containing port, id, and local of_node + * @bus_type: bus type + * @bus: bus configuration data structure + * @head: list head for this structure + */ +struct v4l2_of_endpoint { + struct of_endpoint base; + enum v4l2_mbus_type bus_type; + union { + struct v4l2_of_bus_parallel parallel; + struct v4l2_of_bus_mipi_csi2 mipi_csi2; + } bus; + struct list_head head; +}; + +#ifdef CONFIG_OF +int v4l2_of_parse_endpoint(const struct device_node *node, + struct v4l2_of_endpoint *endpoint); +#else /* CONFIG_OF */ + +static inline int v4l2_of_parse_endpoint(const struct device_node *node, + struct v4l2_of_endpoint *link) +{ + return -ENOSYS; +} + +#endif /* CONFIG_OF */ + +#endif /* _V4L2_OF_H */ diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index daf1e57d9b2..d7465725773 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -21,7 +21,13 @@ #ifndef _V4L2_SUBDEV_H #define _V4L2_SUBDEV_H +#include <linux/types.h> +#include <linux/v4l2-subdev.h> +#include <media/media-entity.h> +#include <media/v4l2-async.h> #include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> #include <media/v4l2-mediabus.h> /* generic v4l2_device notify callback notification values */ @@ -36,8 +42,12 @@ struct v4l2_device; struct v4l2_ctrl_handler; +struct v4l2_event_subscription; +struct v4l2_fh; struct v4l2_subdev; +struct v4l2_subdev_fh; struct tuner_setup; +struct v4l2_mbus_frame_desc; /* decode_vbi_line */ struct v4l2_decode_vbi_line { @@ -79,7 +89,6 @@ struct v4l2_decode_vbi_line { /* Core ops: it is highly recommended to implement at least these ops: - g_chip_ident log_status g_register s_register @@ -113,7 +122,7 @@ struct v4l2_subdev_io_pin_config { each pin being configured. This function could be called at times other than just subdevice initialization. - init: initialize the sensor registors to some sort of reasonable default + init: initialize the sensor registers to some sort of reasonable default values. Do not use for new drivers and should be removed in existing drivers. @@ -136,7 +145,6 @@ struct v4l2_subdev_io_pin_config { performed later. It must not sleep. *Called from an IRQ context*. */ struct v4l2_subdev_core_ops { - int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n, struct v4l2_subdev_io_pin_config *pincfg); @@ -151,34 +159,46 @@ struct v4l2_subdev_core_ops { int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm); - int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); +#ifdef CONFIG_COMPAT + long (*compat_ioctl32)(struct v4l2_subdev *sd, unsigned int cmd, + unsigned long arg); +#endif #ifdef CONFIG_VIDEO_ADV_DEBUG int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); - int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); + int (*s_register)(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg); #endif int (*s_power)(struct v4l2_subdev *sd, int on); int (*interrupt_service_routine)(struct v4l2_subdev *sd, u32 status, bool *handled); + int (*subscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); + int (*unsubscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); }; -/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio. +/* s_radio: v4l device was opened in radio mode. + + g_frequency: freq->type must be filled in. Normally done by video_ioctl2 + or the bridge driver. - s_radio: v4l device was opened in Radio mode, to be replaced by s_mode. + g_tuner: + s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the + bridge driver. s_type_addr: sets tuner type and its I2C addr. s_config: sets tda9887 specific stuff, like port1, port2 and qss */ struct v4l2_subdev_tuner_ops { - int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type); int (*s_radio)(struct v4l2_subdev *sd); - int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); + int (*s_frequency)(struct v4l2_subdev *sd, const struct v4l2_frequency *freq); int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); + int (*enum_freq_bands)(struct v4l2_subdev *sd, struct v4l2_frequency_band *band); int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); - int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); + int (*s_tuner)(struct v4l2_subdev *sd, const struct v4l2_tuner *vt); int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm); - int (*s_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm); + int (*s_modulator)(struct v4l2_subdev *sd, const struct v4l2_modulator *vm); int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); }; @@ -210,10 +230,52 @@ struct v4l2_subdev_audio_ops { int (*s_stream)(struct v4l2_subdev *sd, int enable); }; +/* Indicates the @length field specifies maximum data length. */ +#define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX (1U << 0) +/* + * Indicates that the format does not have line offsets, i.e. the + * receiver should use 1D DMA. + */ +#define V4L2_MBUS_FRAME_DESC_FL_BLOB (1U << 1) + +/** + * struct v4l2_mbus_frame_desc_entry - media bus frame description structure + * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags + * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set + * @length: number of octets per frame, valid if V4L2_MBUS_FRAME_DESC_FL_BLOB + * is set + */ +struct v4l2_mbus_frame_desc_entry { + u16 flags; + u32 pixelcode; + u32 length; +}; + +#define V4L2_FRAME_DESC_ENTRY_MAX 4 + +/** + * struct v4l2_mbus_frame_desc - media bus data frame description + * @entry: frame descriptors array + * @num_entries: number of entries in @entry array + */ +struct v4l2_mbus_frame_desc { + struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX]; + unsigned short num_entries; +}; + /* s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. + g_std_output: get current standard for video OUTPUT devices. This is ignored + by video input devices. + + g_tvnorms: get v4l2_std_id with all standards supported by the video + CAPTURE device. This is ignored by video output devices. + + g_tvnorms_output: get v4l2_std_id with all standards supported by the video + OUTPUT device. This is ignored by video capture devices. + s_crystal_freq: sets the frequency of the crystal used to generate the clocks in Hz. An extra flags field allows device specific configuration regarding clock frequency dividers, etc. If not used, then set flags @@ -225,12 +287,6 @@ struct v4l2_subdev_audio_ops { s_routing: see s_routing in audio_ops, except this version is for video devices. - s_dv_preset: set dv (Digital Video) preset in the sub device. Similar to - s_std() - - query_dv_preset: query dv preset in the sub device. This is similar to - querystd() - s_dv_timings(): Set custom dv timings in the sub device. This is used when sub device is capable of setting detailed timing information in the hardware to generate/detect the video signal. @@ -244,39 +300,62 @@ struct v4l2_subdev_audio_ops { try_mbus_fmt: try to set a pixel format on a video data source s_mbus_fmt: set a pixel format on a video data source + + g_mbus_config: get supported mediabus configurations + + s_mbus_config: set a certain mediabus configuration. This operation is added + for compatibility with soc-camera drivers and should not be used by new + software. + + s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev + can adjust @size to a lower value and must not write more data to the + buffer starting at @data than the original value of @size. */ struct v4l2_subdev_video_ops { int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags); + int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm); + int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std); + int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std); int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*g_tvnorms)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std); int (*g_input_status)(struct v4l2_subdev *sd, u32 *status); int (*s_stream)(struct v4l2_subdev *sd, int enable); int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc); int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop); - int (*s_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop); + int (*s_crop)(struct v4l2_subdev *sd, const struct v4l2_crop *crop); int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); + int (*g_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *interval); + int (*s_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *interval); int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize); int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival); - int (*enum_dv_presets) (struct v4l2_subdev *sd, - struct v4l2_dv_enum_preset *preset); - int (*s_dv_preset)(struct v4l2_subdev *sd, - struct v4l2_dv_preset *preset); - int (*query_dv_preset)(struct v4l2_subdev *sd, - struct v4l2_dv_preset *preset); int (*s_dv_timings)(struct v4l2_subdev *sd, struct v4l2_dv_timings *timings); int (*g_dv_timings)(struct v4l2_subdev *sd, struct v4l2_dv_timings *timings); + int (*query_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings); int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index, enum v4l2_mbus_pixelcode *code); + int (*enum_mbus_fsizes)(struct v4l2_subdev *sd, + struct v4l2_frmsizeenum *fsize); int (*g_mbus_fmt)(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt); int (*try_mbus_fmt)(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt); int (*s_mbus_fmt)(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt); + int (*g_mbus_config)(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg); + int (*s_mbus_config)(struct v4l2_subdev *sd, + const struct v4l2_mbus_config *cfg); + int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf, + unsigned int *size); }; /* @@ -324,9 +403,13 @@ struct v4l2_subdev_vbi_ops { * This is needed for some sensors, which always corrupt * several top lines of the output image, or which send their * metadata in them. + * @g_skip_frames: number of frames to skip at stream start. This is needed for + * buggy sensors that generate faulty frames when they are + * turned on. */ struct v4l2_subdev_sensor_ops { int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines); + int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames); }; /* @@ -401,6 +484,50 @@ struct v4l2_subdev_ir_ops { struct v4l2_subdev_ir_parameters *params); }; +/** + * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations + * @get_frame_desc: get the current low level media bus frame parameters. + * @get_frame_desc: set the low level media bus frame parameters, @fd array + * may be adjusted by the subdev driver to device capabilities. + */ +struct v4l2_subdev_pad_ops { + int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code); + int (*enum_frame_size)(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse); + int (*enum_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_interval_enum *fie); + int (*get_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format); + int (*set_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format); + int (*set_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop); + int (*get_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop); + int (*get_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel); + int (*set_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel); + int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid); + int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid); + int (*dv_timings_cap)(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap); + int (*enum_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings); +#ifdef CONFIG_MEDIA_CONTROLLER + int (*link_validate)(struct v4l2_subdev *sd, struct media_link *link, + struct v4l2_subdev_format *source_fmt, + struct v4l2_subdev_format *sink_fmt); +#endif /* CONFIG_MEDIA_CONTROLLER */ + int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd); + int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd); +}; + struct v4l2_subdev_ops { const struct v4l2_subdev_core_ops *core; const struct v4l2_subdev_tuner_ops *tuner; @@ -409,6 +536,7 @@ struct v4l2_subdev_ops { const struct v4l2_subdev_vbi_ops *vbi; const struct v4l2_subdev_ir_ops *ir; const struct v4l2_subdev_sensor_ops *sensor; + const struct v4l2_subdev_pad_ops *pad; }; /* @@ -420,25 +548,50 @@ struct v4l2_subdev_ops { * * unregistered: called when this subdev is unregistered. When called the * v4l2_dev field is still set to the correct v4l2_device. + * + * open: called when the subdev device node is opened by an application. + * + * close: called when the subdev device node is closed. */ struct v4l2_subdev_internal_ops { int (*registered)(struct v4l2_subdev *sd); void (*unregistered)(struct v4l2_subdev *sd); + int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); + int (*close)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); }; #define V4L2_SUBDEV_NAME_SIZE 32 /* Set this flag if this subdev is a i2c device. */ -#define V4L2_SUBDEV_FL_IS_I2C (1U << 0) +#define V4L2_SUBDEV_FL_IS_I2C (1U << 0) /* Set this flag if this subdev is a spi device. */ -#define V4L2_SUBDEV_FL_IS_SPI (1U << 1) +#define V4L2_SUBDEV_FL_IS_SPI (1U << 1) +/* Set this flag if this subdev needs a device node. */ +#define V4L2_SUBDEV_FL_HAS_DEVNODE (1U << 2) +/* Set this flag if this subdev generates events. */ +#define V4L2_SUBDEV_FL_HAS_EVENTS (1U << 3) + +struct regulator_bulk_data; + +struct v4l2_subdev_platform_data { + /* Optional regulators uset to power on/off the subdevice */ + struct regulator_bulk_data *regulators; + int num_regulators; + + /* Per-subdevice data, specific for a certain video host device */ + void *host_priv; +}; /* Each instance of a subdev driver should create this struct, either stand-alone or embedded in a larger struct. */ struct v4l2_subdev { +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_entity entity; +#endif struct list_head list; struct module *owner; + bool owner_v4l2_dev; u32 flags; struct v4l2_device *v4l2_dev; const struct v4l2_subdev_ops *ops; @@ -453,8 +606,60 @@ struct v4l2_subdev { /* pointer to private data */ void *dev_priv; void *host_priv; + /* subdev device node */ + struct video_device *devnode; + /* pointer to the physical device, if any */ + struct device *dev; + /* Links this subdev to a global subdev_list or @notifier->done list. */ + struct list_head async_list; + /* Pointer to respective struct v4l2_async_subdev. */ + struct v4l2_async_subdev *asd; + /* Pointer to the managing notifier. */ + struct v4l2_async_notifier *notifier; + /* common part of subdevice platform data */ + struct v4l2_subdev_platform_data *pdata; +}; + +#define media_entity_to_v4l2_subdev(ent) \ + container_of(ent, struct v4l2_subdev, entity) +#define vdev_to_v4l2_subdev(vdev) \ + ((struct v4l2_subdev *)video_get_drvdata(vdev)) + +/* + * Used for storing subdev information per file handle + */ +struct v4l2_subdev_fh { + struct v4l2_fh vfh; +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + struct { + struct v4l2_mbus_framefmt try_fmt; + struct v4l2_rect try_crop; + struct v4l2_rect try_compose; + } *pad; +#endif }; +#define to_v4l2_subdev_fh(fh) \ + container_of(fh, struct v4l2_subdev_fh, vfh) + +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) +#define __V4L2_SUBDEV_MK_GET_TRY(rtype, fun_name, field_name) \ + static inline struct rtype * \ + v4l2_subdev_get_try_##fun_name(struct v4l2_subdev_fh *fh, \ + unsigned int pad) \ + { \ + BUG_ON(pad >= vdev_to_v4l2_subdev( \ + fh->vfh.vdev)->entity.num_pads); \ + return &fh->pad[pad].field_name; \ + } + +__V4L2_SUBDEV_MK_GET_TRY(v4l2_mbus_framefmt, format, try_fmt) +__V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, crop, try_crop) +__V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, compose, try_compose) +#endif + +extern const struct v4l2_file_operations v4l2_subdev_fops; + static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p) { sd->dev_priv = p; @@ -475,33 +680,26 @@ static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd) return sd->host_priv; } -static inline void v4l2_subdev_init(struct v4l2_subdev *sd, - const struct v4l2_subdev_ops *ops) -{ - INIT_LIST_HEAD(&sd->list); - /* ops->core MUST be set */ - BUG_ON(!ops || !ops->core); - sd->ops = ops; - sd->v4l2_dev = NULL; - sd->flags = 0; - sd->name[0] = '\0'; - sd->grp_id = 0; - sd->dev_priv = NULL; - sd->host_priv = NULL; -} +#ifdef CONFIG_MEDIA_CONTROLLER +int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd, + struct media_link *link, + struct v4l2_subdev_format *source_fmt, + struct v4l2_subdev_format *sink_fmt); +int v4l2_subdev_link_validate(struct media_link *link); +#endif /* CONFIG_MEDIA_CONTROLLER */ +void v4l2_subdev_init(struct v4l2_subdev *sd, + const struct v4l2_subdev_ops *ops); /* Call an ops of a v4l2_subdev, doing the right checks against NULL pointers. - Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); + Example: err = v4l2_subdev_call(sd, video, s_std, norm); */ #define v4l2_subdev_call(sd, o, f, args...) \ (!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \ (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD)) -/* Send a notification to v4l2_device. */ -#define v4l2_subdev_notify(sd, notification, arg) \ - ((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \ - (sd)->v4l2_dev->notify((sd), (notification), (arg))) +#define v4l2_subdev_has_op(sd, o, f) \ + ((sd)->ops->o && (sd)->ops->o->f) #endif diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h index 90ed895e217..8c6e825940e 100644 --- a/include/media/videobuf-core.h +++ b/include/media/videobuf-core.h @@ -72,7 +72,6 @@ struct videobuf_buffer { unsigned int height; unsigned int bytesperline; /* use only if != 0 */ unsigned long size; - unsigned int input; enum v4l2_field field; enum videobuf_state state; struct list_head stream; /* QBUF/DQBUF list */ @@ -142,7 +141,6 @@ struct videobuf_queue { wait_queue_head_t wait; /* wait if queue is empty */ enum v4l2_buf_type type; - unsigned int inputs; /* for V4L2_BUF_FLAG_INPUT */ unsigned int msize; enum v4l2_field field; enum v4l2_field last; /* for field=V4L2_FIELD_ALTERNATE */ diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index 1c647e8148c..d8fb6012c10 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -34,7 +34,7 @@ * does memory allocation too using vmalloc_32(). * * videobuf_dma_*() - * see Documentation/PCI/PCI-DMA-mapping.txt, these functions to + * see Documentation/DMA-API-HOWTO.txt, these functions to * basically the same. The map function does also build a * scatterlist for the buffer (and unmap frees it ...) * diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h index 07cf4b9d0a6..d63965a1faa 100644 --- a/include/media/videobuf-dvb.h +++ b/include/media/videobuf-dvb.h @@ -4,6 +4,9 @@ #include <dvb_net.h> #include <dvb_frontend.h> +#ifndef _VIDEOBUF_DVB_H_ +#define _VIDEOBUF_DVB_H_ + struct videobuf_dvb { /* filling that the job of the driver */ char *name; @@ -42,9 +45,7 @@ int videobuf_dvb_register_bus(struct videobuf_dvb_frontends *f, void *adapter_priv, struct device *device, short *adapter_nr, - int mfe_shared, - int (*fe_ioctl_override)(struct dvb_frontend *, - unsigned int, void *, unsigned int)); + int mfe_shared); void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f); @@ -54,6 +55,7 @@ void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f); struct videobuf_dvb_frontend * videobuf_dvb_get_frontend(struct videobuf_dvb_frontends *f, int id); int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, struct dvb_frontend *p); +#endif /* _VIDEOBUF_DVB_H_ */ /* * Local variables: diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h new file mode 100644 index 00000000000..8fab6fa0dbf --- /dev/null +++ b/include/media/videobuf2-core.h @@ -0,0 +1,628 @@ +/* + * videobuf2-core.h - V4L2 driver helper framework + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ +#ifndef _MEDIA_VIDEOBUF2_CORE_H +#define _MEDIA_VIDEOBUF2_CORE_H + +#include <linux/mm_types.h> +#include <linux/mutex.h> +#include <linux/poll.h> +#include <linux/videodev2.h> +#include <linux/dma-buf.h> + +struct vb2_alloc_ctx; +struct vb2_fileio_data; +struct vb2_threadio_data; + +/** + * struct vb2_mem_ops - memory handling/memory allocator operations + * @alloc: allocate video memory and, optionally, allocator private data, + * return NULL on failure or a pointer to allocator private, + * per-buffer data on success; the returned private structure + * will then be passed as buf_priv argument to other ops in this + * structure. Additional gfp_flags to use when allocating the + * are also passed to this operation. These flags are from the + * gfp_flags field of vb2_queue. + * @put: inform the allocator that the buffer will no longer be used; + * usually will result in the allocator freeing the buffer (if + * no other users of this buffer are present); the buf_priv + * argument is the allocator private per-buffer structure + * previously returned from the alloc callback. + * @get_userptr: acquire userspace memory for a hardware operation; used for + * USERPTR memory types; vaddr is the address passed to the + * videobuf layer when queuing a video buffer of USERPTR type; + * should return an allocator private per-buffer structure + * associated with the buffer on success, NULL on failure; + * the returned private structure will then be passed as buf_priv + * argument to other ops in this structure. + * @put_userptr: inform the allocator that a USERPTR buffer will no longer + * be used. + * @attach_dmabuf: attach a shared struct dma_buf for a hardware operation; + * used for DMABUF memory types; alloc_ctx is the alloc context + * dbuf is the shared dma_buf; returns NULL on failure; + * allocator private per-buffer structure on success; + * this needs to be used for further accesses to the buffer. + * @detach_dmabuf: inform the exporter of the buffer that the current DMABUF + * buffer is no longer used; the buf_priv argument is the + * allocator private per-buffer structure previously returned + * from the attach_dmabuf callback. + * @map_dmabuf: request for access to the dmabuf from allocator; the allocator + * of dmabuf is informed that this driver is going to use the + * dmabuf. + * @unmap_dmabuf: releases access control to the dmabuf - allocator is notified + * that this driver is done using the dmabuf for now. + * @prepare: called every time the buffer is passed from userspace to the + * driver, useful for cache synchronisation, optional. + * @finish: called every time the buffer is passed back from the driver + * to the userspace, also optional. + * @vaddr: return a kernel virtual address to a given memory buffer + * associated with the passed private structure or NULL if no + * such mapping exists. + * @cookie: return allocator specific cookie for a given memory buffer + * associated with the passed private structure or NULL if not + * available. + * @num_users: return the current number of users of a memory buffer; + * return 1 if the videobuf layer (or actually the driver using + * it) is the only user. + * @mmap: setup a userspace mapping for a given memory buffer under + * the provided virtual memory region. + * + * Required ops for USERPTR types: get_userptr, put_userptr. + * Required ops for MMAP types: alloc, put, num_users, mmap. + * Required ops for read/write access types: alloc, put, num_users, vaddr. + * Required ops for DMABUF types: attach_dmabuf, detach_dmabuf, map_dmabuf, + * unmap_dmabuf. + */ +struct vb2_mem_ops { + void *(*alloc)(void *alloc_ctx, unsigned long size, gfp_t gfp_flags); + void (*put)(void *buf_priv); + struct dma_buf *(*get_dmabuf)(void *buf_priv, unsigned long flags); + + void *(*get_userptr)(void *alloc_ctx, unsigned long vaddr, + unsigned long size, int write); + void (*put_userptr)(void *buf_priv); + + void (*prepare)(void *buf_priv); + void (*finish)(void *buf_priv); + + void *(*attach_dmabuf)(void *alloc_ctx, struct dma_buf *dbuf, + unsigned long size, int write); + void (*detach_dmabuf)(void *buf_priv); + int (*map_dmabuf)(void *buf_priv); + void (*unmap_dmabuf)(void *buf_priv); + + void *(*vaddr)(void *buf_priv); + void *(*cookie)(void *buf_priv); + + unsigned int (*num_users)(void *buf_priv); + + int (*mmap)(void *buf_priv, struct vm_area_struct *vma); +}; + +struct vb2_plane { + void *mem_priv; + struct dma_buf *dbuf; + unsigned int dbuf_mapped; +}; + +/** + * enum vb2_io_modes - queue access methods + * @VB2_MMAP: driver supports MMAP with streaming API + * @VB2_USERPTR: driver supports USERPTR with streaming API + * @VB2_READ: driver supports read() style access + * @VB2_WRITE: driver supports write() style access + * @VB2_DMABUF: driver supports DMABUF with streaming API + */ +enum vb2_io_modes { + VB2_MMAP = (1 << 0), + VB2_USERPTR = (1 << 1), + VB2_READ = (1 << 2), + VB2_WRITE = (1 << 3), + VB2_DMABUF = (1 << 4), +}; + +/** + * enum vb2_fileio_flags - flags for selecting a mode of the file io emulator, + * by default the 'streaming' style is used by the file io emulator + * @VB2_FILEIO_READ_ONCE: report EOF after reading the first buffer + * @VB2_FILEIO_WRITE_IMMEDIATELY: queue buffer after each write() call + */ +enum vb2_fileio_flags { + VB2_FILEIO_READ_ONCE = (1 << 0), + VB2_FILEIO_WRITE_IMMEDIATELY = (1 << 1), +}; + +/** + * enum vb2_buffer_state - current video buffer state + * @VB2_BUF_STATE_DEQUEUED: buffer under userspace control + * @VB2_BUF_STATE_PREPARING: buffer is being prepared in videobuf + * @VB2_BUF_STATE_PREPARED: buffer prepared in videobuf and by the driver + * @VB2_BUF_STATE_QUEUED: buffer queued in videobuf, but not in driver + * @VB2_BUF_STATE_ACTIVE: buffer queued in driver and possibly used + * in a hardware operation + * @VB2_BUF_STATE_DONE: buffer returned from driver to videobuf, but + * not yet dequeued to userspace + * @VB2_BUF_STATE_ERROR: same as above, but the operation on the buffer + * has ended with an error, which will be reported + * to the userspace when it is dequeued + */ +enum vb2_buffer_state { + VB2_BUF_STATE_DEQUEUED, + VB2_BUF_STATE_PREPARING, + VB2_BUF_STATE_PREPARED, + VB2_BUF_STATE_QUEUED, + VB2_BUF_STATE_ACTIVE, + VB2_BUF_STATE_DONE, + VB2_BUF_STATE_ERROR, +}; + +struct vb2_queue; + +/** + * struct vb2_buffer - represents a video buffer + * @v4l2_buf: struct v4l2_buffer associated with this buffer; can + * be read by the driver and relevant entries can be + * changed by the driver in case of CAPTURE types + * (such as timestamp) + * @v4l2_planes: struct v4l2_planes associated with this buffer; can + * be read by the driver and relevant entries can be + * changed by the driver in case of CAPTURE types + * (such as bytesused); NOTE that even for single-planar + * types, the v4l2_planes[0] struct should be used + * instead of v4l2_buf for filling bytesused - drivers + * should use the vb2_set_plane_payload() function for that + * @vb2_queue: the queue to which this driver belongs + * @num_planes: number of planes in the buffer + * on an internal driver queue + * @state: current buffer state; do not change + * @queued_entry: entry on the queued buffers list, which holds all + * buffers queued from userspace + * @done_entry: entry on the list that stores all buffers ready to + * be dequeued to userspace + * @planes: private per-plane information; do not change + */ +struct vb2_buffer { + struct v4l2_buffer v4l2_buf; + struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES]; + + struct vb2_queue *vb2_queue; + + unsigned int num_planes; + +/* Private: internal use only */ + enum vb2_buffer_state state; + + struct list_head queued_entry; + struct list_head done_entry; + + struct vb2_plane planes[VIDEO_MAX_PLANES]; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* + * Counters for how often these buffer-related ops are + * called. Used to check for unbalanced ops. + */ + u32 cnt_mem_alloc; + u32 cnt_mem_put; + u32 cnt_mem_get_dmabuf; + u32 cnt_mem_get_userptr; + u32 cnt_mem_put_userptr; + u32 cnt_mem_prepare; + u32 cnt_mem_finish; + u32 cnt_mem_attach_dmabuf; + u32 cnt_mem_detach_dmabuf; + u32 cnt_mem_map_dmabuf; + u32 cnt_mem_unmap_dmabuf; + u32 cnt_mem_vaddr; + u32 cnt_mem_cookie; + u32 cnt_mem_num_users; + u32 cnt_mem_mmap; + + u32 cnt_buf_init; + u32 cnt_buf_prepare; + u32 cnt_buf_finish; + u32 cnt_buf_cleanup; + u32 cnt_buf_queue; + + /* This counts the number of calls to vb2_buffer_done() */ + u32 cnt_buf_done; +#endif +}; + +/** + * struct vb2_ops - driver-specific callbacks + * + * @queue_setup: called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS + * handlers before memory allocation, or, if + * *num_planes != 0, after the allocation to verify a + * smaller number of buffers. Driver should return + * the required number of buffers in *num_buffers, the + * required number of planes per buffer in *num_planes; the + * size of each plane should be set in the sizes[] array + * and optional per-plane allocator specific context in the + * alloc_ctxs[] array. When called from VIDIOC_REQBUFS, + * fmt == NULL, the driver has to use the currently + * configured format and *num_buffers is the total number + * of buffers, that are being allocated. When called from + * VIDIOC_CREATE_BUFS, fmt != NULL and it describes the + * target frame format (if the format isn't valid the + * callback must return -EINVAL). In this case *num_buffers + * are being allocated additionally to q->num_buffers. + * @wait_prepare: release any locks taken while calling vb2 functions; + * it is called before an ioctl needs to wait for a new + * buffer to arrive; required to avoid a deadlock in + * blocking access type. + * @wait_finish: reacquire all locks released in the previous callback; + * required to continue operation after sleeping while + * waiting for a new buffer to arrive. + * @buf_init: called once after allocating a buffer (in MMAP case) + * or after acquiring a new USERPTR buffer; drivers may + * perform additional buffer-related initialization; + * initialization failure (return != 0) will prevent + * queue setup from completing successfully; optional. + * @buf_prepare: called every time the buffer is queued from userspace + * and from the VIDIOC_PREPARE_BUF ioctl; drivers may + * perform any initialization required before each hardware + * operation in this callback; drivers that support + * VIDIOC_CREATE_BUFS must also validate the buffer size; + * if an error is returned, the buffer will not be queued + * in driver; optional. + * @buf_finish: called before every dequeue of the buffer back to + * userspace; drivers may perform any operations required + * before userspace accesses the buffer; optional. The + * buffer state can be one of the following: DONE and + * ERROR occur while streaming is in progress, and the + * PREPARED state occurs when the queue has been canceled + * and all pending buffers are being returned to their + * default DEQUEUED state. Typically you only have to do + * something if the state is VB2_BUF_STATE_DONE, since in + * all other cases the buffer contents will be ignored + * anyway. + * @buf_cleanup: called once before the buffer is freed; drivers may + * perform any additional cleanup; optional. + * @start_streaming: called once to enter 'streaming' state; the driver may + * receive buffers with @buf_queue callback before + * @start_streaming is called; the driver gets the number + * of already queued buffers in count parameter; driver + * can return an error if hardware fails, in that case all + * buffers that have been already given by the @buf_queue + * callback are invalidated. + * If there were not enough queued buffers to start + * streaming, then this callback returns -ENOBUFS, and the + * vb2 core will retry calling @start_streaming when a new + * buffer is queued. + * @stop_streaming: called when 'streaming' state must be disabled; driver + * should stop any DMA transactions or wait until they + * finish and give back all buffers it got from buf_queue() + * callback; may use vb2_wait_for_all_buffers() function + * @buf_queue: passes buffer vb to the driver; driver may start + * hardware operation on this buffer; driver should give + * the buffer back by calling vb2_buffer_done() function; + * it is allways called after calling STREAMON ioctl; + * might be called before start_streaming callback if user + * pre-queued buffers before calling STREAMON. + */ +struct vb2_ops { + int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *alloc_ctxs[]); + + void (*wait_prepare)(struct vb2_queue *q); + void (*wait_finish)(struct vb2_queue *q); + + int (*buf_init)(struct vb2_buffer *vb); + int (*buf_prepare)(struct vb2_buffer *vb); + void (*buf_finish)(struct vb2_buffer *vb); + void (*buf_cleanup)(struct vb2_buffer *vb); + + int (*start_streaming)(struct vb2_queue *q, unsigned int count); + void (*stop_streaming)(struct vb2_queue *q); + + void (*buf_queue)(struct vb2_buffer *vb); +}; + +struct v4l2_fh; + +/** + * struct vb2_queue - a videobuf queue + * + * @type: queue type (see V4L2_BUF_TYPE_* in linux/videodev2.h + * @io_modes: supported io methods (see vb2_io_modes enum) + * @io_flags: additional io flags (see vb2_fileio_flags enum) + * @lock: pointer to a mutex that protects the vb2_queue struct. The + * driver can set this to a mutex to let the v4l2 core serialize + * the queuing ioctls. If the driver wants to handle locking + * itself, then this should be set to NULL. This lock is not used + * by the videobuf2 core API. + * @owner: The filehandle that 'owns' the buffers, i.e. the filehandle + * that called reqbufs, create_buffers or started fileio. + * This field is not used by the videobuf2 core API, but it allows + * drivers to easily associate an owner filehandle with the queue. + * @ops: driver-specific callbacks + * @mem_ops: memory allocator specific callbacks + * @drv_priv: driver private data + * @buf_struct_size: size of the driver-specific buffer structure; + * "0" indicates the driver doesn't want to use a custom buffer + * structure type, so sizeof(struct vb2_buffer) will is used + * @timestamp_flags: Timestamp flags; V4L2_BUF_FLAGS_TIMESTAMP_* and + * V4L2_BUF_FLAGS_TSTAMP_SRC_* + * @gfp_flags: additional gfp flags used when allocating the buffers. + * Typically this is 0, but it may be e.g. GFP_DMA or __GFP_DMA32 + * to force the buffer allocation to a specific memory zone. + * @min_buffers_needed: the minimum number of buffers needed before + * start_streaming() can be called. Used when a DMA engine + * cannot be started unless at least this number of buffers + * have been queued into the driver. + * + * @memory: current memory type used + * @bufs: videobuf buffer structures + * @num_buffers: number of allocated/used buffers + * @queued_list: list of buffers currently queued from userspace + * @queued_count: number of buffers queued and ready for streaming. + * @owned_by_drv_count: number of buffers owned by the driver + * @done_list: list of buffers ready to be dequeued to userspace + * @done_lock: lock to protect done_list list + * @done_wq: waitqueue for processes waiting for buffers ready to be dequeued + * @alloc_ctx: memory type/allocator-specific contexts for each plane + * @streaming: current streaming state + * @start_streaming_called: start_streaming() was called successfully and we + * started streaming. + * @fileio: file io emulator internal data, used only if emulator is active + * @threadio: thread io internal data, used only if thread is active + */ +struct vb2_queue { + enum v4l2_buf_type type; + unsigned int io_modes; + unsigned int io_flags; + struct mutex *lock; + struct v4l2_fh *owner; + + const struct vb2_ops *ops; + const struct vb2_mem_ops *mem_ops; + void *drv_priv; + unsigned int buf_struct_size; + u32 timestamp_flags; + gfp_t gfp_flags; + u32 min_buffers_needed; + +/* private: internal use only */ + enum v4l2_memory memory; + struct vb2_buffer *bufs[VIDEO_MAX_FRAME]; + unsigned int num_buffers; + + struct list_head queued_list; + unsigned int queued_count; + + atomic_t owned_by_drv_count; + struct list_head done_list; + spinlock_t done_lock; + wait_queue_head_t done_wq; + + void *alloc_ctx[VIDEO_MAX_PLANES]; + unsigned int plane_sizes[VIDEO_MAX_PLANES]; + + unsigned int streaming:1; + unsigned int start_streaming_called:1; + + struct vb2_fileio_data *fileio; + struct vb2_threadio_data *threadio; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* + * Counters for how often these queue-related ops are + * called. Used to check for unbalanced ops. + */ + u32 cnt_queue_setup; + u32 cnt_wait_prepare; + u32 cnt_wait_finish; + u32 cnt_start_streaming; + u32 cnt_stop_streaming; +#endif +}; + +void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no); +void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no); + +void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state); +void vb2_discard_done(struct vb2_queue *q); +int vb2_wait_for_all_buffers(struct vb2_queue *q); + +int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b); +int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req); + +int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create); +int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b); + +int __must_check vb2_queue_init(struct vb2_queue *q); + +void vb2_queue_release(struct vb2_queue *q); + +int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b); +int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb); +int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking); + +int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type); +int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type); + +int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma); +#ifndef CONFIG_MMU +unsigned long vb2_get_unmapped_area(struct vb2_queue *q, + unsigned long addr, + unsigned long len, + unsigned long pgoff, + unsigned long flags); +#endif +unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait); +size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count, + loff_t *ppos, int nonblock); +size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count, + loff_t *ppos, int nonblock); +/** + * vb2_thread_fnc - callback function for use with vb2_thread + * + * This is called whenever a buffer is dequeued in the thread. + */ +typedef int (*vb2_thread_fnc)(struct vb2_buffer *vb, void *priv); + +/** + * vb2_thread_start() - start a thread for the given queue. + * @q: videobuf queue + * @fnc: callback function + * @priv: priv pointer passed to the callback function + * @thread_name:the name of the thread. This will be prefixed with "vb2-". + * + * This starts a thread that will queue and dequeue until an error occurs + * or @vb2_thread_stop is called. + * + * This function should not be used for anything else but the videobuf2-dvb + * support. If you think you have another good use-case for this, then please + * contact the linux-media mailinglist first. + */ +int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv, + const char *thread_name); + +/** + * vb2_thread_stop() - stop the thread for the given queue. + * @q: videobuf queue + */ +int vb2_thread_stop(struct vb2_queue *q); + +/** + * vb2_is_streaming() - return streaming status of the queue + * @q: videobuf queue + */ +static inline bool vb2_is_streaming(struct vb2_queue *q) +{ + return q->streaming; +} + +/** + * vb2_fileio_is_active() - return true if fileio is active. + * @q: videobuf queue + * + * This returns true if read() or write() is used to stream the data + * as opposed to stream I/O. This is almost never an important distinction, + * except in rare cases. One such case is that using read() or write() to + * stream a format using V4L2_FIELD_ALTERNATE is not allowed since there + * is no way you can pass the field information of each buffer to/from + * userspace. A driver that supports this field format should check for + * this in the queue_setup op and reject it if this function returns true. + */ +static inline bool vb2_fileio_is_active(struct vb2_queue *q) +{ + return q->fileio; +} + +/** + * vb2_is_busy() - return busy status of the queue + * @q: videobuf queue + * + * This function checks if queue has any buffers allocated. + */ +static inline bool vb2_is_busy(struct vb2_queue *q) +{ + return (q->num_buffers > 0); +} + +/** + * vb2_get_drv_priv() - return driver private data associated with the queue + * @q: videobuf queue + */ +static inline void *vb2_get_drv_priv(struct vb2_queue *q) +{ + return q->drv_priv; +} + +/** + * vb2_set_plane_payload() - set bytesused for the plane plane_no + * @vb: buffer for which plane payload should be set + * @plane_no: plane number for which payload should be set + * @size: payload in bytes + */ +static inline void vb2_set_plane_payload(struct vb2_buffer *vb, + unsigned int plane_no, unsigned long size) +{ + if (plane_no < vb->num_planes) + vb->v4l2_planes[plane_no].bytesused = size; +} + +/** + * vb2_get_plane_payload() - get bytesused for the plane plane_no + * @vb: buffer for which plane payload should be set + * @plane_no: plane number for which payload should be set + * @size: payload in bytes + */ +static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb, + unsigned int plane_no) +{ + if (plane_no < vb->num_planes) + return vb->v4l2_planes[plane_no].bytesused; + return 0; +} + +/** + * vb2_plane_size() - return plane size in bytes + * @vb: buffer for which plane size should be returned + * @plane_no: plane number for which size should be returned + */ +static inline unsigned long +vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no) +{ + if (plane_no < vb->num_planes) + return vb->v4l2_planes[plane_no].length; + return 0; +} + +/* + * The following functions are not part of the vb2 core API, but are simple + * helper functions that you can use in your struct v4l2_file_operations, + * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock + * or video_device->lock is set, and they will set and test vb2_queue->owner + * to check if the calling filehandle is permitted to do the queuing operation. + */ + +/* struct v4l2_ioctl_ops helpers */ + +int vb2_ioctl_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p); +int vb2_ioctl_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *p); +int vb2_ioctl_prepare_buf(struct file *file, void *priv, + struct v4l2_buffer *p); +int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i); +int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i); +int vb2_ioctl_expbuf(struct file *file, void *priv, + struct v4l2_exportbuffer *p); + +/* struct v4l2_file_operations helpers */ + +int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma); +int vb2_fop_release(struct file *file); +int _vb2_fop_release(struct file *file, struct mutex *lock); +ssize_t vb2_fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos); +ssize_t vb2_fop_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos); +unsigned int vb2_fop_poll(struct file *file, poll_table *wait); +#ifndef CONFIG_MMU +unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags); +#endif + +/* struct vb2_ops helpers, only use if vq->lock is non-NULL. */ + +void vb2_ops_wait_prepare(struct vb2_queue *vq); +void vb2_ops_wait_finish(struct vb2_queue *vq); + +#endif /* _MEDIA_VIDEOBUF2_CORE_H */ diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h new file mode 100644 index 00000000000..8197f87d6c6 --- /dev/null +++ b/include/media/videobuf2-dma-contig.h @@ -0,0 +1,32 @@ +/* + * videobuf2-dma-contig.h - DMA contig memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _MEDIA_VIDEOBUF2_DMA_CONTIG_H +#define _MEDIA_VIDEOBUF2_DMA_CONTIG_H + +#include <media/videobuf2-core.h> +#include <linux/dma-mapping.h> + +static inline dma_addr_t +vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no) +{ + dma_addr_t *addr = vb2_plane_cookie(vb, plane_no); + + return *addr; +} + +void *vb2_dma_contig_init_ctx(struct device *dev); +void vb2_dma_contig_cleanup_ctx(void *alloc_ctx); + +extern const struct vb2_mem_ops vb2_dma_contig_memops; + +#endif diff --git a/include/media/videobuf2-dma-sg.h b/include/media/videobuf2-dma-sg.h new file mode 100644 index 00000000000..7b89852779a --- /dev/null +++ b/include/media/videobuf2-dma-sg.h @@ -0,0 +1,26 @@ +/* + * videobuf2-dma-sg.h - DMA scatter/gather memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _MEDIA_VIDEOBUF2_DMA_SG_H +#define _MEDIA_VIDEOBUF2_DMA_SG_H + +#include <media/videobuf2-core.h> + +static inline struct sg_table *vb2_dma_sg_plane_desc( + struct vb2_buffer *vb, unsigned int plane_no) +{ + return (struct sg_table *)vb2_plane_cookie(vb, plane_no); +} + +extern const struct vb2_mem_ops vb2_dma_sg_memops; + +#endif diff --git a/include/media/videobuf2-dvb.h b/include/media/videobuf2-dvb.h new file mode 100644 index 00000000000..8f61456f139 --- /dev/null +++ b/include/media/videobuf2-dvb.h @@ -0,0 +1,58 @@ +#ifndef _VIDEOBUF2_DVB_H_ +#define _VIDEOBUF2_DVB_H_ + +#include <dvbdev.h> +#include <dmxdev.h> +#include <dvb_demux.h> +#include <dvb_net.h> +#include <dvb_frontend.h> +#include <media/videobuf2-core.h> + +struct vb2_dvb { + /* filling that the job of the driver */ + char *name; + struct dvb_frontend *frontend; + struct vb2_queue dvbq; + + /* video-buf-dvb state info */ + struct mutex lock; + int nfeeds; + + /* vb2_dvb_(un)register manages this */ + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net net; +}; + +struct vb2_dvb_frontend { + struct list_head felist; + int id; + struct vb2_dvb dvb; +}; + +struct vb2_dvb_frontends { + struct list_head felist; + struct mutex lock; + struct dvb_adapter adapter; + int active_fe_id; /* Indicates which frontend in the felist is in use */ + int gate; /* Frontend with gate control 0=!MFE,1=fe0,2=fe1 etc */ +}; + +int vb2_dvb_register_bus(struct vb2_dvb_frontends *f, + struct module *module, + void *adapter_priv, + struct device *device, + short *adapter_nr, + int mfe_shared); + +void vb2_dvb_unregister_bus(struct vb2_dvb_frontends *f); + +struct vb2_dvb_frontend *vb2_dvb_alloc_frontend(struct vb2_dvb_frontends *f, int id); +void vb2_dvb_dealloc_frontends(struct vb2_dvb_frontends *f); + +struct vb2_dvb_frontend *vb2_dvb_get_frontend(struct vb2_dvb_frontends *f, int id); +int vb2_dvb_find_frontend(struct vb2_dvb_frontends *f, struct dvb_frontend *p); + +#endif /* _VIDEOBUF2_DVB_H_ */ diff --git a/include/media/videobuf2-memops.h b/include/media/videobuf2-memops.h new file mode 100644 index 00000000000..f05444ca8c0 --- /dev/null +++ b/include/media/videobuf2-memops.h @@ -0,0 +1,40 @@ +/* + * videobuf2-memops.h - generic memory handling routines for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _MEDIA_VIDEOBUF2_MEMOPS_H +#define _MEDIA_VIDEOBUF2_MEMOPS_H + +#include <media/videobuf2-core.h> + +/** + * vb2_vmarea_handler - common vma refcount tracking handler + * @refcount: pointer to refcount entry in the buffer + * @put: callback to function that decreases buffer refcount + * @arg: argument for @put callback + */ +struct vb2_vmarea_handler { + atomic_t *refcount; + void (*put)(void *arg); + void *arg; +}; + +extern const struct vm_operations_struct vb2_common_vm_ops; + +int vb2_get_contig_userptr(unsigned long vaddr, unsigned long size, + struct vm_area_struct **res_vma, dma_addr_t *res_pa); + +struct vm_area_struct *vb2_get_vma(struct vm_area_struct *vma); +void vb2_put_vma(struct vm_area_struct *vma); + + +#endif diff --git a/include/media/videobuf2-vmalloc.h b/include/media/videobuf2-vmalloc.h new file mode 100644 index 00000000000..93a76b43038 --- /dev/null +++ b/include/media/videobuf2-vmalloc.h @@ -0,0 +1,20 @@ +/* + * videobuf2-vmalloc.h - vmalloc memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _MEDIA_VIDEOBUF2_VMALLOC_H +#define _MEDIA_VIDEOBUF2_VMALLOC_H + +#include <media/videobuf2-core.h> + +extern const struct vb2_mem_ops vb2_vmalloc_memops; + +#endif diff --git a/include/media/wm8775.h b/include/media/wm8775.h index 60739c5a23a..d0e801a9935 100644 --- a/include/media/wm8775.h +++ b/include/media/wm8775.h @@ -32,4 +32,13 @@ #define WM8775_AIN3 4 #define WM8775_AIN4 8 + +struct wm8775_platform_data { + /* + * FIXME: Instead, we should parametrize the params + * that need different settings between ivtv, pvrusb2, and Nova-S + */ + bool is_nova_s; +}; + #endif |