diff options
Diffstat (limited to 'include/media/rc-core.h')
| -rw-r--r-- | include/media/rc-core.h | 104 |
1 files changed, 95 insertions, 9 deletions
diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 2963263f31e..fde142e5f25 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -1,7 +1,7 @@ /* * Remote Controller core header * - * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * Copyright (C) 2009-2010 by Mauro Carvalho Chehab * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,8 +23,11 @@ #include <media/rc-map.h> extern int rc_core_debug; -#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt , __func__, ## arg) +#define IR_dprintk(level, fmt, ...) \ +do { \ + if (rc_core_debug >= level) \ + pr_debug("%s: " fmt, __func__, ##__VA_ARGS__); \ +} while (0) enum rc_driver_type { RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */ @@ -32,20 +35,49 @@ enum rc_driver_type { }; /** + * struct rc_scancode_filter - Filter scan codes. + * @data: Scancode data to match. + * @mask: Mask of bits of scancode to compare. + */ +struct rc_scancode_filter { + u32 data; + u32 mask; +}; + +/** + * enum rc_filter_type - Filter type constants. + * @RC_FILTER_NORMAL: Filter for normal operation. + * @RC_FILTER_WAKEUP: Filter for waking from suspend. + * @RC_FILTER_MAX: Number of filter types. + */ +enum rc_filter_type { + RC_FILTER_NORMAL = 0, + RC_FILTER_WAKEUP, + + RC_FILTER_MAX +}; + +/** * struct rc_dev - represents a remote control device * @dev: driver model's view of this device + * @sysfs_groups: sysfs attribute groups * @input_name: name of the input child device * @input_phys: physical path to the input child device * @input_id: id of the input child device (struct input_id) * @driver_name: name of the hardware driver which registered this device * @map_name: name of the default keymap * @rc_map: current scan/key table + * @lock: used to ensure we've filled in all protocol details before + * anyone can call show_protocols or store_protocols * @devno: unique remote control device number * @raw: additional data for raw pulse/space devices * @input_dev: the input child device used to communicate events to userspace - * @driver_type: specifies if protocol decoding is done in hardware or software + * @driver_type: specifies if protocol decoding is done in hardware or software * @idle: used to keep track of RX state - * @allowed_protos: bitmask with the supported RC_TYPE_* protocols + * @allowed_protocols: bitmask with the supported RC_BIT_* protocols for each + * filter type + * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols for each + * filter type * @scanmask: some hardware decoders are not capable of providing the full * scancode to the application. As this is a hardware limit, we can't do * anything with it. Yet, as the same keycode table can be used with other @@ -64,7 +96,10 @@ enum rc_driver_type { * @max_timeout: maximum timeout supported by device * @rx_resolution : resolution (in ns) of input sampler * @tx_resolution: resolution (in ns) of output sampler + * @scancode_filters: scancode filters (indexed by enum rc_filter_type) * @change_protocol: allow changing the protocol used on hardware decoders + * @change_wakeup_protocol: allow changing the protocol used for wakeup + * filtering * @open: callback to allow drivers to enable polling/irq when IR input device * is opened. * @close: callback to allow drivers to disable polling/irq when IR input device @@ -78,21 +113,27 @@ enum rc_driver_type { * device doesn't interrupt host until it sees IR pulses * @s_learning_mode: enable wide band receiver used for learning * @s_carrier_report: enable carrier reports + * @s_filter: set the scancode filter + * @s_wakeup_filter: set the wakeup scancode filter */ struct rc_dev { struct device dev; + const struct attribute_group *sysfs_groups[5]; const char *input_name; const char *input_phys; struct input_id input_id; char *driver_name; const char *map_name; - struct rc_map rc_map; + struct rc_map rc_map; + struct mutex lock; unsigned long devno; struct ir_raw_event_ctrl *raw; struct input_dev *input_dev; enum rc_driver_type driver_type; bool idle; - u64 allowed_protos; + u64 allowed_protocols[RC_FILTER_MAX]; + u64 enabled_protocols[RC_FILTER_MAX]; + u32 users; u32 scanmask; void *priv; spinlock_t keylock; @@ -107,21 +148,63 @@ struct rc_dev { u32 max_timeout; u32 rx_resolution; u32 tx_resolution; - int (*change_protocol)(struct rc_dev *dev, u64 rc_type); + struct rc_scancode_filter scancode_filters[RC_FILTER_MAX]; + int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); + int (*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type); int (*open)(struct rc_dev *dev); void (*close)(struct rc_dev *dev); int (*s_tx_mask)(struct rc_dev *dev, u32 mask); int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); - int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n); + int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n); void (*s_idle)(struct rc_dev *dev, bool enable); int (*s_learning_mode)(struct rc_dev *dev, int enable); int (*s_carrier_report) (struct rc_dev *dev, int enable); + int (*s_filter)(struct rc_dev *dev, + struct rc_scancode_filter *filter); + int (*s_wakeup_filter)(struct rc_dev *dev, + struct rc_scancode_filter *filter); }; #define to_rc_dev(d) container_of(d, struct rc_dev, dev) +static inline bool rc_protocols_allowed(struct rc_dev *rdev, u64 protos) +{ + return rdev->allowed_protocols[RC_FILTER_NORMAL] & protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_allowed_protocols(struct rc_dev *rdev, u64 protos) +{ + rdev->allowed_protocols[RC_FILTER_NORMAL] = protos; +} + +static inline bool rc_protocols_enabled(struct rc_dev *rdev, u64 protos) +{ + return rdev->enabled_protocols[RC_FILTER_NORMAL] & protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_enabled_protocols(struct rc_dev *rdev, u64 protos) +{ + rdev->enabled_protocols[RC_FILTER_NORMAL] = protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_allowed_wakeup_protocols(struct rc_dev *rdev, + u64 protos) +{ + rdev->allowed_protocols[RC_FILTER_WAKEUP] = protos; +} + +/* should be called prior to registration or with mutex held */ +static inline void rc_set_enabled_wakeup_protocols(struct rc_dev *rdev, + u64 protos) +{ + rdev->enabled_protocols[RC_FILTER_WAKEUP] = protos; +} + /* * From rc-main.c * Those functions can be used on any type of Remote Controller. They @@ -134,6 +217,9 @@ void rc_free_device(struct rc_dev *dev); int rc_register_device(struct rc_dev *dev); void rc_unregister_device(struct rc_dev *dev); +int rc_open(struct rc_dev *rdev); +void rc_close(struct rc_dev *rdev); + void rc_repeat(struct rc_dev *dev); void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle); void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle); |