Age | Commit message (Collapse) | Author |
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54770 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the r2iMap_ by value. This will prevent references to them from being invalidated
if the map is changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54763 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
forgot
to multiply the instruction count by a constant factor in a few places, which
caused the register allocator to require many more iterations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53959 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
live intervals itself to use an instruction count approximation that is
not affected by inserting empty indices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53937 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
as a questionable case, but the code isn't actually needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52657 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
picking the register with the lowest spill weight. Consider (up to) 2 additional registers with spill weights that are close to the lowest spill weight. The one with fewest defs and uses that conflicts with the current interval (weighted by loop depth) is the spill candidate.
This is not always a win, but there are much more wins than loses and wins tend to be more noticeable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52554 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52040 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51934 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
backtracking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49544 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49167 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48751 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48341 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
around the def's and use's of the interval being allocated to make it possible for the interval to target a register and spill it right away and restore a register for uses. This likely generates terrible code but is before than aborting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48218 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48204 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48175 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instead of init'ing it maximally to zeros on entry. getFreePhysReg
is pretty hot and only a few elements are typically used. This speeds
up linscan by 5% on 176.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47631 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47629 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
would have been a Godsend here!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47625 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47375 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46930 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
preserved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45596 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that "machine" classes are used to represent the current state of
the code being compiled. Given this expanded name, we can start
moving other stuff into it. For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.
Update all the clients to match.
This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45467 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45418 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44838 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
When a live interval is being spilled, rather than creating short, non-spillable
intervals for every def / use, split the interval at BB boundaries. That is, for
every BB where the live interval is defined or used, create a new interval that
covers all the defs and uses in the BB.
This is designed to eliminate one common problem: multiple reloads of the same
value in a single basic block. Note, it does *not* decrease the number of spills
since no copies are inserted so the split intervals are *connected* through
spill and reloads (or rematerialization). The newly created intervals can be
spilled again, in that case, since it does not span multiple basic blocks, it's
spilled in the usual manner. However, it can reuse the same stack slot as the
previously split interval.
This is currently controlled by -split-intervals-at-bb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44198 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44154 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44153 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44010 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
interval may have been undone as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43670 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
can be eliminated by the allocator is the destination and source targets the
same register. The most common case is when the source and destination registers
are in different class. For example, on x86 mov32to32_ targets GR32_ which
contains a subset of the registers in GR32.
The allocator can do 2 things:
1. Set the preferred allocation for the destination of a copy to that of its source.
2. After allocation is done, change the allocation of a copy destination (if
legal) so the copy can be eliminated.
This eliminates 443 extra moves from 403.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43662 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43069 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43061 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43043 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42898 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41743 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
intervals that are coalesced to be rematerialized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41060 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
simultaneously. Move that pass to SimpleRegisterCoalescing.
This makes it easier to implement alternative register allocation and
coalescing strategies while maintaining reuse of the existing live
interval analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37520 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
certain linkers...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36944 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36662 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Due to darwin gcc bug, one version of darwin linker coalesces
static const int, which defauts PassID based pass identification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36652 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36632 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36452 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36431 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
long live interval that has low usage density.
1. Change order of coalescing to join physical registers with virtual
registers first before virtual register intervals become too long.
2. Check size and usage density to determine if it's worthwhile to join.
3. If joining is aborted, assign virtual register live interval allocation
preference field to the physical register.
4. Register allocator should try to allocate to the preferred register
first (if available) to create identify moves that can be eliminated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36218 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35208 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34593 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34428 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Revert patches that caused the problem. Evan, please investigate and reapply
when you've discovered the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34399 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34382 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34342 91177308-0d34-0410-b5e6-96231b3b80d8
|