aboutsummaryrefslogtreecommitdiff
path: root/tcl/interface
AgeCommit message (Expand)Author
2020-02-24coding style: add newline at end of text filesAntonio Borneo
2020-02-23tcl/interface/ftdi: Add imx8mp-evk internal JTAG interfaceLeonard Crestez
2020-02-06tcl: fix remaining scripts after rework adapter commandsAntonio Borneo
2020-02-06tcl: Add interface config for isodebug isolated JTAG/SWD+UARTAndreas Fritiofson
2020-01-29tcl: replace the deprecated commands with "adapter ..."Antonio Borneo
2020-01-29tcl: replace command "interface" with "adapter driver"Antonio Borneo
2020-01-14stlink: add DAP direct driverAntonio Borneo
2019-10-15Update FTDI C232HM cfg, and add two new cfgs from cable modem researchAl Dyrius
2018-12-06stlink: add support for STLINK-V3Antonio Borneo
2018-12-06stlink: add usb pid for v2.1 without mass storage deviceAntonio Borneo
2018-09-10interface: adapter configuration for FTDI C232HMSteven Stallion
2018-05-31jtag/drivers: Add support for TI XDS110 debug probeEdward Fewell
2018-03-13jtag: drivers: add support for FT232R sync bitbang JTAG interfacesMatej Kogovsek
2018-03-13tcl: interface: usb blaster I: specify driver explicitlyPaul Fertser
2018-03-12Add SWD protocol support to buspirate (2nd try)Mateusz Manowiecki
2018-03-07pipistrello: decrease jtag speed to 10 MHzRobert Jordens
2018-01-30tcl: interface: harmonise RPi configsPaul Fertser
2018-01-13ftdi swd: disable SWD output pin during inputPatrick Stewart
2018-01-13digilent_jtag_smt2_nc: add supportRobert Jordens
2017-12-12jtag: drivers: stlink: handle all versions with single configPaul Fertser
2017-10-27tcl/interface/ftdi/openrd: Fix FTDI channel + device descriptionJonathan McDowell
2017-10-03tcl/interface/ftdi: improve minimodule configDiego Herranz
2017-10-03tcl/interface/ftdi/sheevaplug: Fix FTDI channel configurationJonathan McDowell
2017-05-31imx_gpio: add mmap based jtag interface for IMX processorsGrzegorz Kostka
2017-05-12jtag/drivers: Add Cypress KitProg driverForest Crossman
2017-04-23added interface config file for In-Circuit's ICprog OpenOCD JTAG adapterMatthias Bock
2016-11-06Remove support for the GPL incompatible FTDI D2XX libraryAndreas Fritiofson
2016-11-06Remove since long deprecated ft2232 driverAndreas Fritiofson
2016-08-14interface: Add XDS100v3 support.Remco Bloemen
2016-08-14tcl/interface/ftdi: add config for the MBFTDI adapterAntony Pavlov
2016-04-12interface/jlink: Fix comment about serial numberMarc Schink
2016-02-13add Digilent HS2 supportAndrew Kohlsmith
2016-02-03tcl: Support for the miniSpartan6+ board.Tim 'mithro' Ansell
2015-11-16tcl/interface/ftdi: add 100ask's OpenJTAG configPaul Fertser
2015-11-13topic: Interface config file for FTDI UM232H moduleRagnar Sundblad
2015-10-21tcl: Setting lowlevel driver for ixo-usb-jtagTim 'mithro' Ansell
2015-09-30tcl/interface/ftdi: Add Digilent JTAG-HS3 configAndreas Färber
2015-08-06bcm2835gpio: Add SWD support, Raspberry Pi 2 support.Christoph Pittracher
2015-08-06kc705: digilent-jtag/kintex7/jtagspi boardRobert Jordens
2015-08-06pipistrello: ftdi-jtag/spartan6/jtagspi boardRobert Jordens
2015-04-14turtelizer2-revC: Tested with real hardware.Uwe Bonnes
2015-04-14tcl/interface/parport: default to sane value on non-windows systemsPaul Fertser
2015-03-09tcl/interface/ftdi/xdsv2: fix and clarify EMU* signalsMatthijs van Duin
2015-02-22cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPadPaul Fertser
2015-02-11tcl/interface/ftdi: correct LED config for BusBlaster KT-LinkAnton Kuzmin
2015-02-11J-Link serial number config optionJoerg Fischer
2015-01-15tcl/interface/ftdi: add config for the IoT-LAB adapterPaul Fertser
2014-11-02tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic diagramPaul Fertser
2014-10-16cmsis-dap: add serial number supportSpencer Oliver
2014-10-06interface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control definitionPaul Fertser
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-02-16 12:05:50 +0000