aboutsummaryrefslogtreecommitdiff
path: root/tcl/interface
AgeCommit message (Expand)Author
2016-08-14interface: Add XDS100v3 support.Remco Bloemen
2016-08-14tcl/interface/ftdi: add config for the MBFTDI adapterAntony Pavlov
2016-04-12interface/jlink: Fix comment about serial numberMarc Schink
2016-02-13add Digilent HS2 supportAndrew Kohlsmith
2016-02-03tcl: Support for the miniSpartan6+ board.Tim 'mithro' Ansell
2015-11-16tcl/interface/ftdi: add 100ask's OpenJTAG configPaul Fertser
2015-11-13topic: Interface config file for FTDI UM232H moduleRagnar Sundblad
2015-10-21tcl: Setting lowlevel driver for ixo-usb-jtagTim 'mithro' Ansell
2015-09-30tcl/interface/ftdi: Add Digilent JTAG-HS3 configAndreas Färber
2015-08-06bcm2835gpio: Add SWD support, Raspberry Pi 2 support.Christoph Pittracher
2015-08-06kc705: digilent-jtag/kintex7/jtagspi boardRobert Jordens
2015-08-06pipistrello: ftdi-jtag/spartan6/jtagspi boardRobert Jordens
2015-04-14turtelizer2-revC: Tested with real hardware.Uwe Bonnes
2015-04-14tcl/interface/parport: default to sane value on non-windows systemsPaul Fertser
2015-03-09tcl/interface/ftdi/xdsv2: fix and clarify EMU* signalsMatthijs van Duin
2015-02-22cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPadPaul Fertser
2015-02-11tcl/interface/ftdi: correct LED config for BusBlaster KT-LinkAnton Kuzmin
2015-02-11J-Link serial number config optionJoerg Fischer
2015-01-15tcl/interface/ftdi: add config for the IoT-LAB adapterPaul Fertser
2014-11-02tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic diagramPaul Fertser
2014-10-16cmsis-dap: add serial number supportSpencer Oliver
2014-10-06interface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control definitionPaul Fertser
2014-09-22Support hla_serial command for ST-LINK adapters.Austin Phillips
2014-09-11tcl/interface/ftdi/sheevaplug: fix device descriptionPaul Fertser
2014-09-08tcl/interface/ftdi: fix TRST for Olimex TINY adaptersPaul Fertser
2014-09-08tcl/interface/ftdi: add kt-link config (with SWD) for DP BusBlasterPaul Fertser
2014-08-19tcl/interface/ftdi: auto-select SWD from converters' configsPaul Fertser
2014-08-04interface/ftdi: Mark flyswatter.cfg as testedAndreas Fritiofson
2014-06-28cfg: add SWD configs for stellaris ftdi based adaptersSpencer Oliver
2014-06-28tcl/interface/ftdi: add SWD configs for kt-link, olimex, rowley and resistor ...Paul Fertser
2014-06-28jtag/drivers/ftdi: require defining SWD_EN signal for SWD modePaul Fertser
2014-06-28cfg: Add SWD support to JTAG-lock-pick Tiny 2Andreas Fritiofson
2014-03-17tcl/interface/ftdi: add Digilent JTAG-SMT2 configPaul Fertser
2014-03-17stlink_usb.c: add support for STLink V2-1Bartosz Bielawski
2014-03-09interface/ftdi/xds100v2.cfg: Add another VID/PID, drop descTom Rini
2014-02-11interface/ftdi/xds100v2.cfg: default to reset state and ask user to release i...Paul Fertser
2014-02-04interface/ftdi: add TUMPA Lite configPaul Fertser
2014-01-20jtag/drivers: add USB-Blaster IIFranck Jullien
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver
2013-12-31jtag_vpi: make the server address configurableFranck Jullien
2013-12-14ftdi/neodb.cfg: mark as testedPaul Fertser
2013-10-31ftdi/tumpa.cfg: enable proper output buffer control, add another USB IDPaul Fertser
2013-09-08jtag: drivers: Add JTAP VPI client driverFranck Jullien
2013-08-29Added new ftdi interface devicePushpal Sidhu
2013-08-15interface/ftdi/tumpa: remove ftdi_device_desc as it's incorrectPaul Fertser
2013-08-09remove the untested warning in ftdi/olimex-arm-usb-tiny-h.cfgSergey Alirzaev
2013-07-15ftdi/board: Add support for DENX M53EVKMarek Vasut
2013-07-09ftdi/xds100v2.cfg: Remove the warning as it has been testedLaszlo Papp
2013-07-08cfg: Update Flyswatter 2 URLAndreas Fritiofson
2013-06-12ftdi: config for TUMPAPaul Fertser
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 03:55:51 +0000