aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-15The openocd-0.8.0-rc2 release candidatev0.8.0-rc2Paul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-15NEWS: minor fixes for rc2Paul Fertser
Change-Id: Iba04baae4f3278db8b36283574a82c077d28bb4a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2113 Tested-by: jenkins
2014-04-14svf: try to reallocate buffers if they're not enoughPaul Fertser
On larger FPGAs the default buffer size is not nearly enough; automatically reallocate it as needed. Change-Id: Ic8071e8cceddeef897ce76996c029250fd22662b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2099 Tested-by: jenkins Reviewed-by: Kenneth Lorthioir <ibelimb@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14cortex_a: fix endiannes issues on TI TMS570Seth LaForge
The TI TMS470 and TMS570 series of processors are BE-32 processors, despite BE-32 not being supported by ARM in the Cortex-R4 core. TI hacked in BE-32 support, which requires odd swizzling in OpenOCD to make memory reads and writes function correctly. In particular, without this change, OpenOCD word reads and writes had the bytes reversed, and halfword and byte packed reads were reading garbage. In my testing, this change fixes these problems. Change-Id: I21dd30f4b9003f20fcc85f674ab833407bb61f74 Signed-off-by: Seth LaForge <sethml@google.com> Reviewed-on: http://openocd.zylin.com/2064 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14usb_blaster: fix warning: array subscript has type ‘char’Spencer Oliver
caught by clang 3.4 running on cygwin. Change-Id: I59f652337334e557fb50374f5270ba9c30392b6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2100 Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2014-04-14mips32, dsp563xx: fix segfault on Gdb attachPaul Fertser
Since c6216201b249e6a97fcc085e413e3d34e0de6fb7 gdb target description generation support is enabled by default and it counts on checking "feature" pointer in reg_list. Both mips32 and dsp563xx neither used calloc nor explicitly set feature (as it was a newly introduced struct field). This patch changes all targets to use calloc for consistency. Change-Id: I9eceadef8b04aacb108e24ae23cb51ca3009586f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2102 Tested-by: jenkins Reviewed-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14configure: presto ftdi driver requires libftdiPaul Fertser
Change-Id: I4b04eec5084d4b8129e2aff8f3411c6d92e84431 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2101 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-04-14jtag/drivers/remote_bitbang: use sizeof to determine maximum unix socket ↵Paul Fertser
path length Different *nix systems use different constants, so sizeof should be used instead. This fixes the build on OS X (as sun_path length is hardcoded to 104 on Darwin). Change-Id: I1df611383dedcfc6d153ec59b453a895c7d84e94 Reported-by: Xiaofan Chen <xiaofanc@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2095 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-04-14target: fix incorrect arm cpu monitor mode encodingTim Sander
According to the "Arm Arch Ref Manual ARMv7-a and ARMv7-R edition" the CPSR encoding for Monitor mode is 0b10110 (22) not 0b11010 (26) as is currently used. Change-Id: I73373a0029a81abc92febf518b88bf0dd4dec1fa Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2081 Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Tested-by: jenkins Reviewed-by: Younes REGAIEG <y.regaieg@gmail.com> Reviewed-by: Tim Sander <tim@krieglstein.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-04-14tcl: bcm6348 target config, BT HomeHub v1 board configLee Bowyer
Also add the board to the firmware recovery script. Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0 Signed-off-by: Lee Bowyer <lee@sodnpoo.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14contrib/rpc_examples: add example for python3Andreas Ortmann
Halt, resume, memory read/write are used in various ways. Change-Id: Ia6727678bfc19cc764f822b739bddaae56e9dc70 Signed-off-by: Andreas Ortmann <ortmann@finf.uni-hannover.de> Reviewed-on: http://openocd.zylin.com/2000 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-04-14openocd.rules: match CMSIS DAP devices by product stringPaul Fertser
Since the standard requires to have "CMSIS-DAP" somewhere in product string, use that to automatically match all the compliant adapters. Change-Id: I1e2ac088333a7d69a136af825248914339debdd8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2082 Tested-by: jenkins Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14parport: add "aspo" hotpluggable adapter configKarl Hammar
This adds a new adapter config. Design files are available from: http://turkos.aspodata.se/git/openhw/isp/pp_jtag_arm20.sch http://turkos.aspodata.se/git/openhw/isp/pp_jtag_arm20.pcb No need to document it anywhere as only a single device was ever built. Change-Id: If031fdb9dedb1e544401747bfb7fbc5afc4d5407 Signed-off-by: Karl Hammar <karl@aspodata.se> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2094 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14target/cortex_a: check gdb_service before dereferencing in update_halt_gdbPaul Fertser
If gdb was disconnected by the moment the target entered halted state, update_halt_gdb would segfault. Change-Id: I67477e9199c1df097be83a49e38602f975c083f5 Reported-by: Younes REGAIEG <younes.regaieg@imag.fr> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2098 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14README.OSX: add 10.9 specific hintsPaul Fertser
Change-Id: I8c684f2964262fb0670ed74fded26676833aee10 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2080 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-04-14Makefile.am: fix build for libftdi1, pass CFLAGS where appropriatePaul Fertser
Change-Id: I9d8afa6ae32fc01e69ec434b5bc9d71524d386a2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2079 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-04-08jtag/aice/aice_usb: remove unused constantsPaul Fertser
Those are breaking the build with clang 3.4 (current default compiler on OS X 10.9.2). Change-Id: I9f2fbfbb6d544498cb8d6a62565e4ebe7223e784 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2077 Tested-by: jenkins Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com>
2014-04-08flash/nor/at91sam3: remove sam3_page_write_opcodesPaul Fertser
Apparently this helper was never actually used, and current clang produces an unused const variable warning, so it's breaking the build. Change-Id: Ib088bef5e9c0a48942c1d417d46f738469ee7e28 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2076 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-03-30Restore -dev suffixPaul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-03-30The openocd-0.8.0-rc1 release candidatev0.8.0-rc1Paul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-03-30Don't cast return value of [cm]allocAndreas Fritiofson
Change-Id: I0028a5b6757b1ba00031893d9a2a1725f915a0d5 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2069 Tested-by: jenkins Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-30Makefile.am: fix adding contrib directory for distPaul Fertser
With extra / the directory was getting added as a subdirectory of itself. Change-Id: I5a3d5635f3c949f39d88b34a2ddab8244643f560 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2070 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29NEWS: add release highlightsPaul Fertser
Change-Id: Ifa4459b3b7b58b639d6c885a2ea88cefbfac2680 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1881 Tested-by: jenkins
2014-03-29at91smad: Fixes to 'samd_protect'Andrey Smirnov
Some fixes to 'samd_protect' including: - Fix a bug in which the value of 'set' parameter passed into the function was ignored so it was impossible to remove flash protection once it was set. - Check the protection status of the sector via 'is_protected' field of the corresponding 'flash_sector' structure to see if any actual HW manipulations needs to be done. - Change the way the errors during protection activation are handled. Now even in the case of error in the middle of protecting a number of sectors the subroutine would still update the state of the sector protection in sectors array so as to avoid cases where openocd thinks that the sector is not protected while it actually is. Change-Id: I4cc6445a98ec13bdd94c89f0711c17840738a215 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2027 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29at91samd: Bail early if trying to erase protected sectorAndrey Smirnov
Bail early if trying to erase protected sector and also do not double-erase already erased sectors. Change-Id: Ic2d39af48c3b8e10e78d52dd978b9bc01f671c6a Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2026 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29at91samd: Bail early if trying to write to protected sectorAndrey Smirnov
Bail early if trying to write to protected sector also mark the sector we are writing to as dirty. Change-Id: I892f83461792e1cc2dcccade7aa65717831a6805 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2025 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29at91samd: Remove 'first' and 'last' checks in 'samd_erase'Andrey Smirnov
Remove 'first' and 'last' checks in 'samd_protect' since those parameters are checked in 'handle_flash_erase_command'. Change-Id: I30e5598a9ab656d81055f26cc63e291377605300 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2024 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29tcl: introduce init_target_events and use it for gdb flashing eventsPaul Fertser
This introduces a new global Tcl procedure that is run just after init_targets and before init_boards. Its default behaviour is to assign gdb-flash-erase-start and gdb-flash-write-end to reasonable defaults. The rationale for doing "reset init" before gdb erases and flashes memory is that all flash drivers are written in assumption that they can safely be used only after chip reset (plus chip-specific configuration in the init handler if any). The need to use "reset halt" after flashing is because a user expects running firmware after loading to be the same as running it from power-on-reset. Change-Id: I9ddc4047611904ca4ca779b73376d2739611948a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2062 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29tcl/target: make milandr configs swd-compatiblePaul Fertser
Change-Id: Ibb34f0d7829b205341bcce511ffc2624bdfe2c75 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1962 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29target: remove memory leaksSpencer Oliver
Found by clang. Change-Id: Ifb25dca52f8d9e8e46a35f0947a7239f26eb3757 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2067 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
2014-03-29target: fix handle_profile_command variable typoSpencer Oliver
Change-Id: I5d476aecb4622731890e168b1be3173718151e95 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2066 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29target: remove handle_profile_command memory leakSpencer Oliver
COMMAND_PARSE_NUMBER may return, thus any memory allocated may not be freed, simple reorder fixes the issue. Change-Id: I0ce444a5b032f5c49b6d33a03a8c0b71cad49c8c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2065 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29Add xscale debug helper sources and everything related to distPaul Fertser
GPL requires providing sources for any derived work. I do not see any reason to not include the xscale stuff into release tarballs. Wildcard matching is used because plain directory name matches implicit rule for executables and xscale.c built is errorneously attempted, and directory name with a slash duplicates a directory (xscale/xscale) in dist. Change-Id: Ie0266470dcb97be87a09ba2dda9b3957f7cbc2fa Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1911 Tested-by: jenkins Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29Add all of contrib/ to dist, not just loadersPaul Fertser
Change-Id: I467e21de6805ea9f23ae483317d602e9d81e1148 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1909 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29Add usb_blaster cheap clone notes to distPaul Fertser
Change-Id: Ie9569634415ef76e88d5ca58bae6184838cf7114 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1908 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29Add rlink speed table sources and everything related to distPaul Fertser
GPL requires providing sources for any derived work. I do not see any reason to not include the rlink stuff into release tarballs. Change-Id: I686ab88994030312aca5bdfe731a72f10803b5c3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1907 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29Move xsvf_tools and remote_bitbang to contrib/Paul Fertser
It looks like tools/ should be used only for build tools, and contrib/ is a suitable place for everything else. Change-Id: Iddaebba0acb6d66404912ec96749b46e4be643d8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1906 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29Add previous NEWS* files to distPaul Fertser
Change-Id: I2f814e01c7b5aa9cd76e8e63c9c4a1ebbf3dd2ea Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1905 Tested-by: jenkins Reviewed-by: Luca Bruno <lucab@debian.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29Move ocl (at91sam7x flash loader) sources to contribPaul Fertser
Change-Id: Ib5c3c505a067d0e285a7b074cb6fddebfa6dda1e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1904 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29doc: add "manual/" directory in its entirety to distPaul Fertser
Change-Id: I750c2938ab207012a6488bf34f55d784e5e26b6e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1903 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29armv7m: remove magic numbers for number of core registersSpencer Oliver
Change-Id: I4296b812f0211011ccf3da8d203545dfba493903 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2053 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29rtos: fix xml register support regressionSpencer Oliver
Seems that when xml register support was added the rtos code was not updated to match. This then caused gdb to return the following error when rtos support was enabled - "Remote 'g' packet reply is too long". Change-Id: I7429c4b1efed120e2e690678d55f3d6e87ee1ff1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2054 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29nrf51: Fix incorrect flash writing sequenceAndrey Smirnov
nRF51 doesn't have any sort of flash page cache so we need to write all of the data on the word-by-word basis and poll for "Flash Ready" bit each time. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: I8caffbf69ebf9a69915724704ddbe270d1bb8d92 Reviewed-on: http://openocd.zylin.com/2050 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29nrf51: Remove unnecessary explicit type castingAndrey Smirnov
Change-Id: I523e81645434760649ea2c00e6f80c2b08d08d94 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2055 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29nrf51: Add UICR writing supportAndrey Smirnov
SoftDevice stack ihex binary, provided by Nordic expects being able to write data necessary for its correct operation at the adresses inside UICR. This patch exposes UICR region of flash as a second bank on the MCU to facilitate that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: Idbc140b8de027f60655f78043877b7c054eb06f9 Reviewed-on: http://openocd.zylin.com/2013 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29nrf51: Add a known devices table and simple chip type detection codeAndrey Smirnov
Unfortunately due to my oversight, the original version of the nrf51_probe function contained useless code that read the contents of DEVICEID[0] an DEVICEID[1] registers and did nothing about it(those registers had nothing to do with the device type information anyway). This commit fixes that code by changing its behavior to read the HWID field of CONFIGID register and looking up the corresponding device information in the know devices table. This information is useful when choosing the versions of SDK and SoftDevice for the chip using "nRF51822 compatibility matrix". Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: Ibd80b35460df4278e86e0c2500b7dcc876eec10c Reviewed-on: http://openocd.zylin.com/2012 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29cfg: or1k_generic: allow TAP_TYPE overrideFranck Jullien
This patch allows users to specify TAP_TYPE from the command line when using or1k_generic.cfg. Change-Id: I9f4b7d8e4867658fa34bb4e92fc3a5f25227df11 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/2056 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29armv7m: Do not ignore 'value' parameter in armv7m_write_core_regAndrey Smirnov
Ignoring the value parameter in that function makes its code rather misleading. Also the only caller of it, armv7m_restore_context already does the whole "buf_get_u32" conversion business, so using 'value' also removes the waste of doing the conversion twice. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: I515979c314d9b59ee1065c55b5bb5747c7e93f01 Reviewed-on: http://openocd.zylin.com/2057 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29tcl: add Zynq-7000 target and Zedboard board configsTim Sander
Change-Id: Ia7f2a57d1b32dda9936ad87e22635f7749ff3ce1 Signed-off-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2061 Tested-by: jenkins
2014-03-29AT91SAM4L: Fix bug when writing to flash at a non-zero offset, add debugAngus Gratton
output for flash page writes The offset wasn't being considered in the "full page" write codepath, so any writes at an offset were actually written out starting from page 0. Change-Id: I5e70a1f35f144b3edd1ce6d9df9af9b5da6cf194 Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/1965 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 17:24:26 +0000