| Age | Commit message (Collapse) | Author |
|---|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75840 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75640 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Make llvm_unreachable take an optional string, thus moving the cerr<< out of
line.
LLVM_UNREACHABLE is now a simple wrapper that makes the message go away for
NDEBUG builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75379 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
and abort()/exit() -> llvm_report_error().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75363 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75153 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
VSETCC must define all bits, which is different than it was documented
to before. Since all targets that implement VSETCC already have this
behavior, and we don't optimize based on this, just change the
documentation. We now get nice code for vec_compare.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74978 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
build vectors with i64 elements will only appear on 32b x86 before legalize.
Since vector widening occurs during legalize, and produces i64 build_vector
elements, the dag combiner is never run on these before legalize splits them
into 32b elements.
Teach the build_vector dag combine in x86 back end to recognize consecutive
loads producing the low part of the vector.
Convert the two uses of TLI's consecutive load recognizer to pass LoadSDNodes
since that was required implicitly.
Add a testcase for the transform.
Old:
subl $28, %esp
movl 32(%esp), %eax
movl 4(%eax), %ecx
movl %ecx, 4(%esp)
movl (%eax), %eax
movl %eax, (%esp)
movaps (%esp), %xmm0
pmovzxwd %xmm0, %xmm0
movl 36(%esp), %eax
movaps %xmm0, (%eax)
addl $28, %esp
ret
New:
movl 4(%esp), %eax
pmovzxwd (%eax), %xmm0
movl 8(%esp), %eax
movaps %xmm0, (%eax)
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72957 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instcombine doesn't know when it's safe. To partially compensate
for this, introduce new code to do this transformation in
dagcombine, which can use UnsafeFPMath.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72872 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72712 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72707 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72557 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72533 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
twiddling instruction and its second operand is an immediate. If bits that are touched by 'op' can be done with a narrower instruction, reduce the width of the load and store as well. This happens a lot with bitfield manipulation code.
e.g.
orl $65536, 8(%rax)
=>
orb $1, 10(%rax)
Since narrowing is not always a win, e.g. i32 -> i16 is a loss on x86, dag combiner consults with the target before performing the optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72507 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The DAGCombiner created a negative shiftamount, stored in an
unsigned variable. Later the optimizer eliminated the shift entirely as being
undefined.
Example: (srl (shl X, 56) 48). ShiftAmt is 4294967288.
Fix it by checking that the shiftamount is positive, and storing in a signed
variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72331 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72011 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
will make it more obvious what it represents, and stop
it being confused with the StoreSize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71349 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71098 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
which better identifies what the optimization is doing. And is more flexible for
future uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70440 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70372 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70343 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70275 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70270 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PR2957
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70225 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the trunc is directly replaced with the smaller load, so don't
try to create a new sext node. This fixes PR4050.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70179 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70052 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69967 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69952 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69607 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
type as the vector element type: allow them to be of
a wider integer type than the element type all the way
through the system, and not just as far as LegalizeDAG.
This should be safe because it used to be this way
(the old type legalizer would produce such nodes), so
backends should be able to handle it. In fact only
targets which have legal vector types with an illegal
promoted element type will ever see this (eg: <4 x i16>
on ppc). This fixes a regression with the new type
legalizer (vec_splat.ll). Also, treat SCALAR_TO_VECTOR
the same as BUILD_VECTOR. After all, it is just a
special case of BUILD_VECTOR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69467 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
promoted to legal types without changing the type of the vector. This is
following a suggestion from Duncan
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2009-February/019923.html).
The transformation that used to be done during type legalization is now
postponed to DAG legalization. This allows the BUILD_VECTORs to be optimized
and potentially handled specially by target-specific code.
It turns out that this is also consistent with an optimization done by the
DAG combiner: a BUILD_VECTOR and INSERT_VECTOR_ELT may be combined by
replacing one of the BUILD_VECTOR operands with the newly inserted element;
but INSERT_VECTOR_ELT allows its scalar operand to be larger than the
element type, with any extra high bits being implicitly truncated. The
result is a BUILD_VECTOR where one of the operands has a type larger the
the vector element type.
Any code that operates on BUILD_VECTORs may now need to be aware of the
potential type discrepancy between the vector element type and the
BUILD_VECTOR operands. This patch updates all of the places that I could
find to handle that case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68996 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
in addition to ZERO_EXTEND and SIGN_EXTEND. Fix a bug in the
way it checked for live-out values, and simplify the way it
find users by using SDNode::use_iterator's (relatively) new
features. Also, make it slightly more permissive on targets
with free truncates.
In SelectionDAGBuild, avoid creating ANY_EXTEND nodes that are
larger than necessary. If the target's SwitchAmountTy has
enough bits, use it. This exposes the truncate to optimization
early, enabling more optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68670 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.
This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.
Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.
Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.
Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.
Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68576 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
shl since imulq is slow (latency 5). e.g.
x * 40
=>
shlq $3, %rdi
leaq (%rdi,%rdi,4), %rax
This has the added benefit of allowing more multiply to be folded into addressing mode. e.g.
a * 24 + b
=>
leaq (%rdi,%rdi,2), %rax
leaq (%rsi,%rax,8), %rax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67917 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67742 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
vector shuffle mask. Forced the mask to be built using i32. Note: this will
be irrelevant once vector_shuffle no longer takes a build vector for the
shuffle mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67076 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
if FPConstant is legal because if the FPConstant doesn't need to be stored
in a constant pool, the transformation is unlikely to be profitable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66994 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
unnecessary paddings between constant pool entries, larger than necessary alignments (e.g. 8 byte alignment for .literal4 sections), and potentially other issues.
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66875 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
related transformations out of target-specific dag combine into the
ARM backend. These were added by Evan in r37685 with no testcases
and only seems to help ARM (e.g. test/CodeGen/ARM/select_xform.ll).
Add some simple X86-specific (for now) DAG combines that turn things
like cond ? 8 : 0 -> (zext(cond) << 3). This happens frequently
with the recently added cp constant select optimization, but is a
very general xform. For example, we now compile the second example
in const-select.ll to:
_test:
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
seta %al
movzbl %al, %eax
movl 4(%esp), %ecx
movsbl (%ecx,%eax,4), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
leal 4(%eax), %ecx
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
cmovbe %eax, %ecx
movsbl (%ecx), %eax
ret
This passes multisource and dejagnu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66779 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
alignment of the generated constant pool entry to the
desired alignment of a type. If we don't do this, we end up
trying to do movsd from 4-byte alignment memory. This fixes
450.soplex and 456.hmmer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66641 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
/ Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66574 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66434 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
For 2009-03-07-FPConstSelect.ll we now produce:
_f:
xorl %eax, %eax
testl %edi, %edi
movl $4, %ecx
cmovne %rax, %rcx
leaq LCPI1_0(%rip), %rax
movss (%rcx,%rax), %xmm0
ret
previously we produced:
_f:
subl $4, %esp
cmpl $0, 8(%esp)
movss LCPI1_0, %xmm0
je LBB1_2 ## entry
LBB1_1: ## entry
movss LCPI1_1, %xmm0
LBB1_2: ## entry
movss %xmm0, (%esp)
flds (%esp)
addl $4, %esp
ret
on PPC the code also improves to:
_f:
cntlzw r2, r3
srwi r2, r2, 5
li r3, lo16(LCPI1_0)
slwi r2, r2, 2
addis r3, r3, ha16(LCPI1_0)
lfsx f1, r3, r2
blr
from:
_f:
li r2, lo16(LCPI1_1)
cmplwi cr0, r3, 0
addis r2, r2, ha16(LCPI1_1)
beq cr0, LBB1_2 ; entry
LBB1_1: ; entry
li r2, lo16(LCPI1_0)
addis r2, r2, ha16(LCPI1_0)
LBB1_2: ; entry
lfs f1, 0(r2)
blr
This also improves the existing pic-cpool case from:
foo:
subl $12, %esp
call .Lllvm$1.$piclabel
.Lllvm$1.$piclabel:
popl %eax
addl $_GLOBAL_OFFSET_TABLE_ + [.-.Lllvm$1.$piclabel], %eax
cmpl $0, 16(%esp)
movsd .LCPI1_0@GOTOFF(%eax), %xmm0
je .LBB1_2 # entry
.LBB1_1: # entry
movsd .LCPI1_1@GOTOFF(%eax), %xmm0
.LBB1_2: # entry
movsd %xmm0, (%esp)
fldl (%esp)
addl $12, %esp
ret
to:
foo:
call .Lllvm$1.$piclabel
.Lllvm$1.$piclabel:
popl %eax
addl $_GLOBAL_OFFSET_TABLE_ + [.-.Lllvm$1.$piclabel], %eax
xorl %ecx, %ecx
cmpl $0, 4(%esp)
movl $8, %edx
cmovne %ecx, %edx
fldl .LCPI1_0@GOTOFF(%eax,%edx)
ret
This triggers a few dozen times in spec FP 2000.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66358 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
extracts + build_vector into a shuffle would fail, because the
type of the new build_vector would not be legal. Try harder to
create a legal build_vector type. Note: this will be totally
irrelevant once vector_shuffle no longer takes a build_vector for
shuffle mask.
New:
_foo:
xorps %xmm0, %xmm0
xorps %xmm1, %xmm1
subps %xmm1, %xmm1
mulps %xmm0, %xmm1
addps %xmm0, %xmm1
movaps %xmm1, 0
Old:
_foo:
xorps %xmm0, %xmm0
movss %xmm0, %xmm1
xorps %xmm2, %xmm2
unpcklps %xmm1, %xmm2
pshufd $80, %xmm1, %xmm1
unpcklps %xmm1, %xmm2
pslldq $16, %xmm2
pshufd $57, %xmm2, %xmm1
subps %xmm0, %xmm1
mulps %xmm0, %xmm1
addps %xmm0, %xmm1
movaps %xmm1, 0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65791 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65482 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
instruction. The class also consolidates the code for detecting constant
splats that's shared across PowerPC and the CellSPU backends (and might be
useful for other backends.) Also introduces SelectionDAG::getBUID_VECTOR() for
generating new BUILD_VECTOR nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65296 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that checks whether it's safe to transform a store of a bitcast
value into a store of the original value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65201 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(Note: Eventually, commits like this will be handled via a pre-commit hook that
does this automagically, as well as expand tabs to spaces and look for 80-col
violations.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64827 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
getCALLSEQ_{END,START} to permit passing no DebugLoc
there. UNDEF doesn't logically have DebugLoc; add
getUNDEF to encapsulate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63978 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63969 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
into SimplifySetCC which gets called elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63583 91177308-0d34-0410-b5e6-96231b3b80d8
|
