aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/musb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r--drivers/usb/musb/Kconfig28
-rw-r--r--drivers/usb/musb/Makefile1
-rw-r--r--drivers/usb/musb/am35x.c78
-rw-r--r--drivers/usb/musb/blackfin.c32
-rw-r--r--drivers/usb/musb/da8xx.c66
-rw-r--r--drivers/usb/musb/davinci.c68
-rw-r--r--drivers/usb/musb/jz4740.c201
-rw-r--r--drivers/usb/musb/musb_am335x.c26
-rw-r--r--drivers/usb/musb/musb_core.c195
-rw-r--r--drivers/usb/musb/musb_core.h15
-rw-r--r--drivers/usb/musb/musb_cppi41.c239
-rw-r--r--drivers/usb/musb/musb_dsps.c302
-rw-r--r--drivers/usb/musb/musb_gadget.c28
-rw-r--r--drivers/usb/musb/musb_host.c48
-rw-r--r--drivers/usb/musb/musb_host.h6
-rw-r--r--drivers/usb/musb/musb_virthub.c139
-rw-r--r--drivers/usb/musb/omap2430.c62
-rw-r--r--drivers/usb/musb/tusb6010.c78
-rw-r--r--drivers/usb/musb/tusb6010.h8
-rw-r--r--drivers/usb/musb/tusb6010_omap.c3
-rw-r--r--drivers/usb/musb/ux500.c17
-rw-r--r--drivers/usb/musb/ux500_dma.c4
22 files changed, 1181 insertions, 463 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index c258a97ef1b..06cc5d6ea68 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -6,7 +6,7 @@
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
- depends on USB_GADGET
+ depends on (USB || USB_GADGET)
help
Say Y here if your system has a dual role high speed USB
controller based on the Mentor Graphics silicon IP. Then
@@ -35,21 +35,23 @@ choice
config USB_MUSB_HOST
bool "Host only mode"
- depends on USB
+ depends on USB=y || USB=USB_MUSB_HDRC
help
Select this when you want to use MUSB in host mode only,
thereby the gadget feature will be regressed.
config USB_MUSB_GADGET
bool "Gadget only mode"
- depends on USB_GADGET
+ depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
+ depends on HAS_DMA
help
Select this when you want to use MUSB in gadget mode only,
thereby the host feature will be regressed.
config USB_MUSB_DUAL_ROLE
bool "Dual Role mode"
- depends on (USB && USB_GADGET)
+ depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
+ depends on HAS_DMA
help
This is the default mode of working of MUSB controller where
both host and gadget features are enabled.
@@ -74,7 +76,8 @@ config USB_MUSB_TUSB6010
config USB_MUSB_OMAP2PLUS
tristate "OMAP2430 and onwards"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS && USB
+ select GENERIC_PHY
config USB_MUSB_AM35X
tristate "AM35x"
@@ -90,7 +93,13 @@ config USB_MUSB_BLACKFIN
depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
config USB_MUSB_UX500
- tristate "U8500 and U5500"
+ tristate "Ux500 platforms"
+
+config USB_MUSB_JZ4740
+ tristate "JZ4740"
+ depends on MACH_JZ4740 || COMPILE_TEST
+ depends on USB_MUSB_GADGET
+ depends on USB_OTG_BLACKLIST_HUB
endchoice
@@ -99,7 +108,7 @@ config USB_MUSB_AM335X_CHILD
choice
prompt 'MUSB DMA mode'
- default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM
+ default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740
default USB_UX500_DMA if USB_MUSB_UX500
default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
@@ -112,7 +121,7 @@ choice
allow using DMA on multiplatform kernels.
config USB_UX500_DMA
- bool 'ST Ericsson U8500 and U5500'
+ bool 'ST Ericsson Ux500'
depends on USB_MUSB_UX500
help
Enable DMA transfers on UX500 platforms.
@@ -132,10 +141,11 @@ config USB_TI_CPPI_DMA
config USB_TI_CPPI41_DMA
bool 'TI CPPI 4.1 (AM335x)'
depends on ARCH_OMAP
+ select TI_CPPI41
config USB_TUSB_OMAP_DMA
bool 'TUSB 6010'
- depends on USB_MUSB_TUSB6010
+ depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
depends on ARCH_OMAP
help
Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index c5ea5c6dc16..ba495018b41 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
+obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o
obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 5c310c66421..0a34dd85955 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -26,14 +26,13 @@
*
*/
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include <linux/platform_data/usb-omap.h>
#include "musb_core.h"
@@ -86,10 +85,10 @@
struct am35x_glue {
struct device *dev;
struct platform_device *musb;
+ struct platform_device *phy;
struct clk *phy_clk;
struct clk *clk;
};
-#define glue_to_musb(g) platform_get_drvdata(g->musb)
/*
* am35x_musb_enable - enable interrupts
@@ -362,7 +361,6 @@ static int am35x_musb_init(struct musb *musb)
if (!rev)
return -ENODEV;
- usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
return -EPROBE_DEFER;
@@ -404,7 +402,6 @@ static int am35x_musb_exit(struct musb *musb)
data->set_phy_power(0);
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
return 0;
}
@@ -452,14 +449,18 @@ static const struct musb_platform_ops am35x_ops = {
.set_vbus = am35x_musb_set_vbus,
};
-static u64 am35x_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info am35x_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
static int am35x_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct am35x_glue *glue;
-
+ struct platform_device_info pinfo;
struct clk *phy_clk;
struct clk *clk;
@@ -471,12 +472,6 @@ static int am35x_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
phy_clk = clk_get(&pdev->dev, "fck");
if (IS_ERR(phy_clk)) {
dev_err(&pdev->dev, "failed to get PHY clock\n");
@@ -503,40 +498,36 @@ static int am35x_probe(struct platform_device *pdev)
goto err6;
}
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &am35x_dmamask;
- musb->dev.coherent_dma_mask = am35x_dmamask;
-
glue->dev = &pdev->dev;
- glue->musb = musb;
glue->phy_clk = phy_clk;
glue->clk = clk;
pdata->platform_ops = &am35x_ops;
- platform_set_drvdata(pdev, glue);
-
- ret = platform_device_add_resources(musb, pdev->resource,
- pdev->num_resources);
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err7;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
+ glue->phy = usb_phy_generic_register();
+ if (IS_ERR(glue->phy))
goto err7;
- }
+ platform_set_drvdata(pdev, glue);
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
- goto err7;
+ pinfo = am35x_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = pdev->resource;
+ pinfo.num_res = pdev->num_resources;
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+ goto err8;
}
return 0;
+err8:
+ usb_phy_generic_unregister(glue->phy);
+
err7:
clk_disable(clk);
@@ -550,9 +541,6 @@ err4:
clk_put(phy_clk);
err3:
- platform_device_put(musb);
-
-err1:
kfree(glue);
err0:
@@ -564,6 +552,7 @@ static int am35x_remove(struct platform_device *pdev)
struct am35x_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister(glue->phy);
clk_disable(glue->clk);
clk_disable(glue->phy_clk);
clk_put(glue->clk);
@@ -615,23 +604,16 @@ static int am35x_resume(struct device *dev)
return 0;
}
-
-static struct dev_pm_ops am35x_pm_ops = {
- .suspend = am35x_suspend,
- .resume = am35x_resume,
-};
-
-#define DEV_PM_OPS &am35x_pm_ops
-#else
-#define DEV_PM_OPS NULL
#endif
+static SIMPLE_DEV_PM_OPS(am35x_pm_ops, am35x_suspend, am35x_resume);
+
static struct platform_driver am35x_driver = {
.probe = am35x_probe,
.remove = am35x_remove,
.driver = {
.name = "musb-am35x",
- .pm = DEV_PM_OPS,
+ .pm = &am35x_pm_ops,
},
};
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 72e2056b608..d40d5f0b552 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -11,7 +11,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/init.h>
#include <linux/list.h>
#include <linux/gpio.h>
#include <linux/io.h>
@@ -19,7 +18,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/prefetch.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include <asm/cacheflush.h>
@@ -30,6 +29,7 @@
struct bfin_glue {
struct device *dev;
struct platform_device *musb;
+ struct platform_device *phy;
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
@@ -77,7 +77,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
SSYNC();
- /* Wait for compelete */
+ /* Wait for complete */
while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
cpu_relax();
@@ -131,7 +131,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
SSYNC();
- /* Wait for compelete */
+ /* Wait for complete */
while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
cpu_relax();
@@ -402,7 +402,6 @@ static int bfin_musb_init(struct musb *musb)
}
gpio_direction_output(musb->config->gpio_vrsel, 0);
- usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
gpio_free(musb->config->gpio_vrsel);
@@ -425,9 +424,8 @@ static int bfin_musb_init(struct musb *musb)
static int bfin_musb_exit(struct musb *musb)
{
gpio_free(musb->config->gpio_vrsel);
-
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+
return 0;
}
@@ -478,6 +476,9 @@ static int bfin_probe(struct platform_device *pdev)
pdata->platform_ops = &bfin_ops;
+ glue->phy = usb_phy_generic_register();
+ if (IS_ERR(glue->phy))
+ goto err2;
platform_set_drvdata(pdev, glue);
memset(musb_resources, 0x00, sizeof(*musb_resources) *
@@ -515,6 +516,9 @@ static int bfin_probe(struct platform_device *pdev)
return 0;
err3:
+ usb_phy_generic_unregister(glue->phy);
+
+err2:
platform_device_put(musb);
err1:
@@ -529,6 +533,7 @@ static int bfin_remove(struct platform_device *pdev)
struct bfin_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister(glue->phy);
kfree(glue);
return 0;
@@ -561,23 +566,16 @@ static int bfin_resume(struct device *dev)
return 0;
}
-
-static struct dev_pm_ops bfin_pm_ops = {
- .suspend = bfin_suspend,
- .resume = bfin_resume,
-};
-
-#define DEV_PM_OPS &bfin_pm_ops
-#else
-#define DEV_PM_OPS NULL
#endif
+static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
+
static struct platform_driver bfin_driver = {
.probe = bfin_probe,
.remove = __exit_p(bfin_remove),
.driver = {
.name = "musb-blackfin",
- .pm = DEV_PM_OPS,
+ .pm = &bfin_pm_ops,
},
};
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index d9ddf4122f3..058775e647a 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -26,14 +26,13 @@
*
*/
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include <mach/da8xx.h>
#include <linux/platform_data/usb-davinci.h>
@@ -86,6 +85,7 @@
struct da8xx_glue {
struct device *dev;
struct platform_device *musb;
+ struct platform_device *phy;
struct clk *clk;
};
@@ -419,7 +419,6 @@ static int da8xx_musb_init(struct musb *musb)
if (!rev)
goto fail;
- usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
ret = -EPROBE_DEFER;
@@ -454,7 +453,6 @@ static int da8xx_musb_exit(struct musb *musb)
phy_off();
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
return 0;
}
@@ -472,7 +470,11 @@ static const struct musb_platform_ops da8xx_ops = {
.set_vbus = da8xx_musb_set_vbus,
};
-static u64 da8xx_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info da8xx_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
static int da8xx_probe(struct platform_device *pdev)
{
@@ -480,7 +482,7 @@ static int da8xx_probe(struct platform_device *pdev)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct da8xx_glue *glue;
-
+ struct platform_device_info pinfo;
struct clk *clk;
int ret = -ENOMEM;
@@ -491,12 +493,6 @@ static int da8xx_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
clk = clk_get(&pdev->dev, "usb20");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
@@ -510,16 +506,16 @@ static int da8xx_probe(struct platform_device *pdev)
goto err4;
}
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &da8xx_dmamask;
- musb->dev.coherent_dma_mask = da8xx_dmamask;
-
glue->dev = &pdev->dev;
- glue->musb = musb;
glue->clk = clk;
pdata->platform_ops = &da8xx_ops;
+ glue->phy = usb_phy_generic_register();
+ if (IS_ERR(glue->phy)) {
+ ret = PTR_ERR(glue->phy);
+ goto err5;
+ }
platform_set_drvdata(pdev, glue);
memset(musb_resources, 0x00, sizeof(*musb_resources) *
@@ -535,27 +531,25 @@ static int da8xx_probe(struct platform_device *pdev)
musb_resources[1].end = pdev->resource[1].end;
musb_resources[1].flags = pdev->resource[1].flags;
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err5;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err5;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
- goto err5;
+ pinfo = da8xx_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = musb_resources;
+ pinfo.num_res = ARRAY_SIZE(musb_resources);
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+ goto err6;
}
return 0;
+err6:
+ usb_phy_generic_unregister(glue->phy);
+
err5:
clk_disable(clk);
@@ -563,9 +557,6 @@ err4:
clk_put(clk);
err3:
- platform_device_put(musb);
-
-err1:
kfree(glue);
err0:
@@ -577,6 +568,7 @@ static int da8xx_remove(struct platform_device *pdev)
struct da8xx_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister(glue->phy);
clk_disable(glue->clk);
clk_put(glue->clk);
kfree(glue);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index ed0834e2b72..de8492b06e4 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -24,7 +24,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/init.h>
#include <linux/list.h>
#include <linux/delay.h>
#include <linux/clk.h>
@@ -33,7 +32,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include <mach/cputype.h>
#include <mach/hardware.h>
@@ -382,7 +381,6 @@ static int davinci_musb_init(struct musb *musb)
u32 revision;
int ret = -ENODEV;
- usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
ret = -EPROBE_DEFER;
@@ -440,7 +438,7 @@ static int davinci_musb_init(struct musb *musb)
fail:
usb_put_phy(musb->xceiv);
unregister:
- usb_nop_xceiv_unregister();
+ usb_phy_generic_unregister();
return ret;
}
@@ -488,7 +486,6 @@ static int davinci_musb_exit(struct musb *musb)
phy_off();
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
return 0;
}
@@ -505,14 +502,19 @@ static const struct musb_platform_ops davinci_ops = {
.set_vbus = davinci_musb_set_vbus,
};
-static u64 davinci_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info davinci_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
static int davinci_probe(struct platform_device *pdev)
{
- struct resource musb_resources[2];
+ struct resource musb_resources[3];
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct davinci_glue *glue;
+ struct platform_device_info pinfo;
struct clk *clk;
int ret = -ENOMEM;
@@ -523,12 +525,6 @@ static int davinci_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
clk = clk_get(&pdev->dev, "usb");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
@@ -542,16 +538,12 @@ static int davinci_probe(struct platform_device *pdev)
goto err4;
}
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &davinci_dmamask;
- musb->dev.coherent_dma_mask = davinci_dmamask;
-
glue->dev = &pdev->dev;
- glue->musb = musb;
glue->clk = clk;
pdata->platform_ops = &davinci_ops;
+ usb_phy_generic_register();
platform_set_drvdata(pdev, glue);
memset(musb_resources, 0x00, sizeof(*musb_resources) *
@@ -567,22 +559,26 @@ static int davinci_probe(struct platform_device *pdev)
musb_resources[1].end = pdev->resource[1].end;
musb_resources[1].flags = pdev->resource[1].flags;
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err5;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err5;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
+ /*
+ * For DM6467 3 resources are passed. A placeholder for the 3rd
+ * resource is always there, so it's safe to always copy it...
+ */
+ musb_resources[2].name = pdev->resource[2].name;
+ musb_resources[2].start = pdev->resource[2].start;
+ musb_resources[2].end = pdev->resource[2].end;
+ musb_resources[2].flags = pdev->resource[2].flags;
+
+ pinfo = davinci_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = musb_resources;
+ pinfo.num_res = ARRAY_SIZE(musb_resources);
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
goto err5;
}
@@ -595,9 +591,6 @@ err4:
clk_put(clk);
err3:
- platform_device_put(musb);
-
-err1:
kfree(glue);
err0:
@@ -609,6 +602,7 @@ static int davinci_remove(struct platform_device *pdev)
struct davinci_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister();
clk_disable(glue->clk);
clk_put(glue->clk);
kfree(glue);
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
new file mode 100644
index 00000000000..5f30537f192
--- /dev/null
+++ b/drivers/usb/musb/jz4740.c
@@ -0,0 +1,201 @@
+/*
+ * Ingenic JZ4740 "glue layer"
+ *
+ * Copyright (C) 2013, Apelete Seketeli <apelete@seketeli.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+struct jz4740_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+
+static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
+{
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE;
+ struct musb *musb = __hci;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+ /*
+ * The controller is gadget only, the state of the host mode IRQ bits is
+ * undefined. Mask them to make sure that the musb driver core will
+ * never see them set
+ */
+ musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
+ MUSB_INTR_RESET | MUSB_INTR_SOF;
+
+ if (musb->int_usb || musb->int_tx || musb->int_rx)
+ retval = musb_interrupt(musb);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return retval;
+}
+
+static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
+};
+
+static struct musb_hdrc_config jz4740_musb_config = {
+ /* Silicon does not implement USB OTG. */
+ .multipoint = 0,
+ /* Max EPs scanned, driver will decide which EP can be used. */
+ .num_eps = 4,
+ /* RAMbits needed to configure EPs from table */
+ .ram_bits = 9,
+ .fifo_cfg = jz4740_musb_fifo_cfg,
+ .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
+};
+
+static struct musb_hdrc_platform_data jz4740_musb_platform_data = {
+ .mode = MUSB_PERIPHERAL,
+ .config = &jz4740_musb_config,
+};
+
+static int jz4740_musb_init(struct musb *musb)
+{
+ musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (!musb->xceiv) {
+ pr_err("HS UDC: no transceiver configured\n");
+ return -ENODEV;
+ }
+
+ /* Silicon does not implement ConfigData register.
+ * Set dyn_fifo to avoid reading EP config from hardware.
+ */
+ musb->dyn_fifo = true;
+
+ musb->isr = jz4740_musb_interrupt;
+
+ return 0;
+}
+
+static int jz4740_musb_exit(struct musb *musb)
+{
+ usb_put_phy(musb->xceiv);
+
+ return 0;
+}
+
+static const struct musb_platform_ops jz4740_musb_ops = {
+ .init = jz4740_musb_init,
+ .exit = jz4740_musb_exit,
+};
+
+static int jz4740_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = &jz4740_musb_platform_data;
+ struct platform_device *musb;
+ struct jz4740_glue *glue;
+ struct clk *clk;
+ int ret;
+
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
+
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ return -ENOMEM;
+ }
+
+ clk = devm_clk_get(&pdev->dev, "udc");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err_platform_device_put;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err_platform_device_put;
+ }
+
+ musb->dev.parent = &pdev->dev;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->clk = clk;
+
+ pdata->platform_ops = &jz4740_musb_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err_clk_disable;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err_clk_disable;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err_clk_disable;
+ }
+
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(clk);
+err_platform_device_put:
+ platform_device_put(musb);
+ return ret;
+}
+
+static int jz4740_remove(struct platform_device *pdev)
+{
+ struct jz4740_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_unregister(glue->musb);
+ clk_disable_unprepare(glue->clk);
+
+ return 0;
+}
+
+static struct platform_driver jz4740_driver = {
+ .probe = jz4740_probe,
+ .remove = jz4740_remove,
+ .driver = {
+ .name = "musb-jz4740",
+ },
+};
+
+MODULE_DESCRIPTION("JZ4740 MUSB Glue Layer");
+MODULE_AUTHOR("Apelete Seketeli <apelete@seketeli.net>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(jz4740_driver);
diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c
index 41ac5b5b57c..1e58ed2361c 100644
--- a/drivers/usb/musb/musb_am335x.c
+++ b/drivers/usb/musb/musb_am335x.c
@@ -1,4 +1,3 @@
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
@@ -20,21 +19,6 @@ err:
return ret;
}
-static int of_remove_populated_child(struct device *dev, void *d)
-{
- struct platform_device *pdev = to_platform_device(dev);
-
- of_device_unregister(pdev);
- return 0;
-}
-
-static int am335x_child_remove(struct platform_device *pdev)
-{
- device_for_each_child(&pdev->dev, NULL, of_remove_populated_child);
- pm_runtime_disable(&pdev->dev);
- return 0;
-}
-
static const struct of_device_id am335x_child_of_match[] = {
{ .compatible = "ti,am33xx-usb" },
{ },
@@ -43,13 +27,17 @@ MODULE_DEVICE_TABLE(of, am335x_child_of_match);
static struct platform_driver am335x_child_driver = {
.probe = am335x_child_probe,
- .remove = am335x_child_remove,
.driver = {
.name = "am335x-usb-childs",
- .of_match_table = of_match_ptr(am335x_child_of_match),
+ .of_match_table = am335x_child_of_match,
},
};
-module_platform_driver(am335x_child_driver);
+static int __init am335x_child_init(void)
+{
+ return platform_driver_register(&am335x_child_driver);
+}
+module_init(am335x_child_init);
+
MODULE_DESCRIPTION("AM33xx child devices");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 18e877ffe7b..eff3c5cf84f 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -83,7 +83,7 @@
* This gets many kinds of configuration information:
* - Kconfig for everything user-configurable
* - platform_device for addressing, irq, and platform_data
- * - platform_data is mostly for board-specific informarion
+ * - platform_data is mostly for board-specific information
* (plus recentrly, SOC or family details)
*
* Most of the conditional compilation will (someday) vanish.
@@ -93,7 +93,6 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/list.h>
#include <linux/kobject.h>
#include <linux/prefetch.h>
@@ -439,7 +438,6 @@ void musb_hnp_stop(struct musb *musb)
static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
u8 devctl)
{
- struct usb_otg *otg = musb->xceiv->otg;
irqreturn_t handled = IRQ_NONE;
dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl,
@@ -479,7 +477,10 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
(USB_PORT_STAT_C_SUSPEND << 16)
| MUSB_PORT_STAT_RESUME;
musb->rh_timer = jiffies
- + msecs_to_jiffies(20);
+ + msecs_to_jiffies(20);
+ schedule_delayed_work(
+ &musb->finish_resume_work,
+ msecs_to_jiffies(20));
musb->xceiv->state = OTG_STATE_A_HOST;
musb->is_active = 1;
@@ -617,7 +618,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
default:
s = "VALID"; break;
- }; s; }),
+ } s; }),
VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
musb->port1_status);
@@ -654,7 +655,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
break;
case OTG_STATE_B_PERIPHERAL:
musb_g_suspend(musb);
- musb->is_active = otg->gadget->b_hnp_enable;
+ musb->is_active = musb->g.b_hnp_enable;
if (musb->is_active) {
musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
@@ -670,7 +671,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
break;
case OTG_STATE_A_HOST:
musb->xceiv->state = OTG_STATE_A_SUSPEND;
- musb->is_active = otg->host->b_hnp_enable;
+ musb->is_active = musb->hcd->self.b_hnp_enable;
break;
case OTG_STATE_B_HOST:
/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -847,6 +848,10 @@ b_host:
}
}
+ /* handle babble condition */
+ if (int_usb & MUSB_INTR_BABBLE && is_host_active(musb))
+ schedule_work(&musb->recover_work);
+
#if 0
/* REVISIT ... this would be for multiplexing periodic endpoints, or
* supporting transfer phasing to prevent exceeding ISO bandwidth
@@ -922,6 +927,52 @@ static void musb_generic_disable(struct musb *musb)
}
/*
+ * Program the HDRC to start (enable interrupts, dma, etc.).
+ */
+void musb_start(struct musb *musb)
+{
+ void __iomem *regs = musb->mregs;
+ u8 devctl = musb_readb(regs, MUSB_DEVCTL);
+
+ dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
+
+ /* Set INT enable registers, enable interrupts */
+ musb->intrtxe = musb->epmask;
+ musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+ musb->intrrxe = musb->epmask & 0xfffe;
+ musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+ musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+ musb_writeb(regs, MUSB_TESTMODE, 0);
+
+ /* put into basic highspeed mode and start session */
+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+ | MUSB_POWER_HSENAB
+ /* ENSUSPEND wedges tusb */
+ /* | MUSB_POWER_ENSUSPEND */
+ );
+
+ musb->is_active = 0;
+ devctl = musb_readb(regs, MUSB_DEVCTL);
+ devctl &= ~MUSB_DEVCTL_SESSION;
+
+ /* session started after:
+ * (a) ID-grounded irq, host mode;
+ * (b) vbus present/connect IRQ, peripheral mode;
+ * (c) peripheral initiates, using SRP
+ */
+ if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+ (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
+ musb->is_active = 1;
+ } else {
+ devctl |= MUSB_DEVCTL_SESSION;
+ }
+
+ musb_platform_enable(musb);
+ musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+/*
* Make the HDRC stop (disable interrupts, etc.);
* reversible by musb_start
* called on gadget driver unregister
@@ -1141,7 +1192,7 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
/* EP0 reserved endpoint for control, bidirectional;
- * EP1 reserved for bulk, two unidirection halves.
+ * EP1 reserved for bulk, two unidirectional halves.
*/
if (hw_ep->epnum == 1)
musb->bulk_ep = hw_ep;
@@ -1699,6 +1750,34 @@ static void musb_irq_work(struct work_struct *data)
}
}
+/* Recover from babble interrupt conditions */
+static void musb_recover_work(struct work_struct *data)
+{
+ struct musb *musb = container_of(data, struct musb, recover_work);
+ int status;
+
+ musb_platform_reset(musb);
+
+ usb_phy_vbus_off(musb->xceiv);
+ udelay(100);
+
+ usb_phy_vbus_on(musb->xceiv);
+ udelay(100);
+
+ /*
+ * When a babble condition occurs, the musb controller removes the
+ * session bit and the endpoint config is lost.
+ */
+ if (musb->dyn_fifo)
+ status = ep_config_from_table(musb);
+ else
+ status = ep_config_from_hw(musb);
+
+ /* start the session again */
+ if (status == 0)
+ musb_start(musb);
+}
+
/* --------------------------------------------------------------------------
* Init support
*/
@@ -1763,12 +1842,25 @@ static void musb_free(struct musb *musb)
disable_irq_wake(musb->nIrq);
free_irq(musb->nIrq, musb);
}
- if (musb->dma_controller)
- dma_controller_destroy(musb->dma_controller);
musb_host_free(musb);
}
+static void musb_deassert_reset(struct work_struct *work)
+{
+ struct musb *musb;
+ unsigned long flags;
+
+ musb = container_of(work, struct musb, deassert_reset_work.work);
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ if (musb->port1_status & USB_PORT_STAT_RESET)
+ musb_port_reset(musb, false);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+}
+
/*
* Perform generic per-controller initialization.
*
@@ -1813,7 +1905,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
/* The musb_platform_init() call:
* - adjusts musb->mregs
* - sets the musb->isr
- * - may initialize an integrated tranceiver
+ * - may initialize an integrated transceiver
* - initializes musb->xceiv, usually by otg_get_phy()
* - stops powering VBUS
*
@@ -1839,13 +1931,24 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
pm_runtime_get_sync(musb->controller);
- if (use_dma && dev->dma_mask)
+ if (use_dma && dev->dma_mask) {
musb->dma_controller = dma_controller_create(musb, musb->mregs);
+ if (IS_ERR(musb->dma_controller)) {
+ status = PTR_ERR(musb->dma_controller);
+ goto fail2_5;
+ }
+ }
/* be sure interrupts are disabled before connecting ISR */
musb_platform_disable(musb);
musb_generic_disable(musb);
+ /* Init IRQ workqueue before request_irq */
+ INIT_WORK(&musb->irq_work, musb_irq_work);
+ INIT_WORK(&musb->recover_work, musb_recover_work);
+ INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
+ INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
+
/* setup musb parts of the core (especially endpoints) */
status = musb_core_init(plat->config->multipoint
? MUSB_CONTROLLER_MHDRC
@@ -1855,9 +1958,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
- /* Init IRQ workqueue before request_irq */
- INIT_WORK(&musb->irq_work, musb_irq_work);
-
/* attach to the IRQ */
if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
dev_err(dev, "request_irq %d failed!\n", nIrq);
@@ -1891,15 +1991,26 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
switch (musb->port_mode) {
case MUSB_PORT_MODE_HOST:
status = musb_host_setup(musb, plat->power);
+ if (status < 0)
+ goto fail3;
+ status = musb_platform_set_mode(musb, MUSB_HOST);
break;
case MUSB_PORT_MODE_GADGET:
status = musb_gadget_setup(musb);
+ if (status < 0)
+ goto fail3;
+ status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
break;
case MUSB_PORT_MODE_DUAL_ROLE:
status = musb_host_setup(musb, plat->power);
if (status < 0)
goto fail3;
status = musb_gadget_setup(musb);
+ if (status) {
+ musb_host_cleanup(musb);
+ goto fail3;
+ }
+ status = musb_platform_set_mode(musb, MUSB_OTG);
break;
default:
dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
@@ -1926,10 +2037,16 @@ fail5:
fail4:
musb_gadget_cleanup(musb);
+ musb_host_cleanup(musb);
fail3:
+ cancel_work_sync(&musb->irq_work);
+ cancel_work_sync(&musb->recover_work);
+ cancel_delayed_work_sync(&musb->finish_resume_work);
+ cancel_delayed_work_sync(&musb->deassert_reset_work);
if (musb->dma_controller)
dma_controller_destroy(musb->dma_controller);
+fail2_5:
pm_runtime_put_sync(musb->controller);
fail2:
@@ -1986,6 +2103,13 @@ static int musb_remove(struct platform_device *pdev)
musb_exit_debugfs(musb);
musb_shutdown(pdev);
+ if (musb->dma_controller)
+ dma_controller_destroy(musb->dma_controller);
+
+ cancel_work_sync(&musb->irq_work);
+ cancel_work_sync(&musb->recover_work);
+ cancel_delayed_work_sync(&musb->finish_resume_work);
+ cancel_delayed_work_sync(&musb->deassert_reset_work);
musb_free(musb);
device_init_wakeup(dev, 0);
return 0;
@@ -2070,11 +2194,19 @@ static void musb_restore_context(struct musb *musb)
void __iomem *musb_base = musb->mregs;
void __iomem *ep_target_regs;
void __iomem *epio;
+ u8 power;
musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
- musb_writeb(musb_base, MUSB_POWER, musb->context.power);
+
+ /* Don't affect SUSPENDM/RESUME bits in POWER reg */
+ power = musb_readb(musb_base, MUSB_POWER);
+ power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME;
+ musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME);
+ power |= musb->context.power;
+ musb_writeb(musb_base, MUSB_POWER, power);
+
musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe);
musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe);
musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
@@ -2158,16 +2290,28 @@ static int musb_suspend(struct device *dev)
*/
}
+ musb_save_context(musb);
+
spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
static int musb_resume_noirq(struct device *dev)
{
- /* for static cmos like DaVinci, register values were preserved
+ struct musb *musb = dev_to_musb(dev);
+
+ /*
+ * For static cmos like DaVinci, register values were preserved
* unless for some reason the whole soc powered down or the USB
* module got reset through the PSC (vs just being disabled).
+ *
+ * For the DSPS glue layer though, a full register restore has to
+ * be done. As it shouldn't harm other platforms, we do it
+ * unconditionally.
*/
+
+ musb_restore_context(musb);
+
return 0;
}
@@ -2225,19 +2369,4 @@ static struct platform_driver musb_driver = {
.shutdown = musb_shutdown,
};
-/*-------------------------------------------------------------------------*/
-
-static int __init musb_init(void)
-{
- if (usb_disabled())
- return 0;
-
- return platform_driver_register(&musb_driver);
-}
-module_init(musb_init);
-
-static void __exit musb_cleanup(void)
-{
- platform_driver_unregister(&musb_driver);
-}
-module_exit(musb_cleanup);
+module_platform_driver(musb_driver);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 65f3917b4fc..d155a156f24 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -46,6 +46,8 @@
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/usb/musb.h>
+#include <linux/phy/phy.h>
+#include <linux/workqueue.h>
struct musb;
struct musb_hw_ep;
@@ -190,6 +192,7 @@ struct musb_platform_ops {
int (*set_mode)(struct musb *musb, u8 mode);
void (*try_idle)(struct musb *musb, unsigned long timeout);
+ void (*reset)(struct musb *musb);
int (*vbus_status)(struct musb *musb);
void (*set_vbus)(struct musb *musb, int on);
@@ -294,6 +297,9 @@ struct musb {
irqreturn_t (*isr)(int, void *);
struct work_struct irq_work;
+ struct work_struct recover_work;
+ struct delayed_work deassert_reset_work;
+ struct delayed_work finish_resume_work;
u16 hwvers;
u16 intrrxe;
@@ -333,6 +339,7 @@ struct musb {
dma_addr_t async;
dma_addr_t sync;
void __iomem *sync_va;
+ u8 tusb_revision;
#endif
/* passed down from chip/board specific irq handlers */
@@ -341,6 +348,7 @@ struct musb {
u16 int_tx;
struct usb_phy *xceiv;
+ struct phy *phy;
int nIrq;
unsigned irq_wake:1;
@@ -503,6 +511,7 @@ static inline void musb_configure_ep0(struct musb *musb)
extern const char musb_driver_name[];
extern void musb_stop(struct musb *musb);
+extern void musb_start(struct musb *musb);
extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
@@ -546,6 +555,12 @@ static inline void musb_platform_try_idle(struct musb *musb,
musb->ops->try_idle(musb, timeout);
}
+static inline void musb_platform_reset(struct musb *musb)
+{
+ if (musb->ops->reset)
+ musb->ops->reset(musb);
+}
+
static inline int musb_platform_get_vbus_status(struct musb *musb)
{
if (!musb->ops->vbus_status)
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index ae959746f77..5341bb223b7 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -38,6 +38,8 @@ struct cppi41_dma_channel {
u32 prog_len;
u32 transferred;
u32 packet_sz;
+ struct list_head tx_check;
+ struct work_struct dma_completion;
};
#define MUSB_DMA_NUM_CHANNELS 15
@@ -47,6 +49,8 @@ struct cppi41_dma_controller {
struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS];
struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS];
struct musb *musb;
+ struct hrtimer early_tx;
+ struct list_head early_tx_list;
u32 rx_mode;
u32 tx_mode;
u32 auto_req;
@@ -96,31 +100,40 @@ static void update_rx_toggle(struct cppi41_dma_channel *cppi41_channel)
cppi41_channel->usb_toggle = toggle;
}
-static void cppi41_dma_callback(void *private_data)
+static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep)
{
- struct dma_channel *channel = private_data;
- struct cppi41_dma_channel *cppi41_channel = channel->private_data;
- struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
- struct musb *musb = hw_ep->musb;
- unsigned long flags;
- struct dma_tx_state txstate;
- u32 transferred;
+ u8 epnum = hw_ep->epnum;
+ struct musb *musb = hw_ep->musb;
+ void __iomem *epio = musb->endpoints[epnum].regs;
+ u16 csr;
- spin_lock_irqsave(&musb->lock, flags);
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (csr & MUSB_TXCSR_TXPKTRDY)
+ return false;
+ return true;
+}
- dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
- &txstate);
- transferred = cppi41_channel->prog_len - txstate.residue;
- cppi41_channel->transferred += transferred;
+static bool is_isoc(struct musb_hw_ep *hw_ep, bool in)
+{
+ if (in && hw_ep->in_qh) {
+ if (hw_ep->in_qh->type == USB_ENDPOINT_XFER_ISOC)
+ return true;
+ } else if (hw_ep->out_qh) {
+ if (hw_ep->out_qh->type == USB_ENDPOINT_XFER_ISOC)
+ return true;
+ }
+ return false;
+}
- dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
- hw_ep->epnum, cppi41_channel->transferred,
- cppi41_channel->total_len);
+static void cppi41_dma_callback(void *private_data);
- update_rx_toggle(cppi41_channel);
+static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
+{
+ struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+ struct musb *musb = hw_ep->musb;
- if (cppi41_channel->transferred == cppi41_channel->total_len ||
- transferred < cppi41_channel->packet_sz) {
+ if (!cppi41_channel->prog_len ||
+ (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)) {
/* done, complete */
cppi41_channel->channel.actual_len =
@@ -150,13 +163,11 @@ static void cppi41_dma_callback(void *private_data)
remain_bytes,
direction,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (WARN_ON(!dma_desc)) {
- spin_unlock_irqrestore(&musb->lock, flags);
+ if (WARN_ON(!dma_desc))
return;
- }
dma_desc->callback = cppi41_dma_callback;
- dma_desc->callback_param = channel;
+ dma_desc->callback_param = &cppi41_channel->channel;
cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
dma_async_issue_pending(dc);
@@ -166,6 +177,155 @@ static void cppi41_dma_callback(void *private_data)
musb_writew(epio, MUSB_RXCSR, csr);
}
}
+}
+
+static void cppi_trans_done_work(struct work_struct *work)
+{
+ unsigned long flags;
+ struct cppi41_dma_channel *cppi41_channel =
+ container_of(work, struct cppi41_dma_channel, dma_completion);
+ struct cppi41_dma_controller *controller = cppi41_channel->controller;
+ struct musb *musb = controller->musb;
+ struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+ bool empty;
+
+ if (!cppi41_channel->is_tx && is_isoc(hw_ep, 1)) {
+ spin_lock_irqsave(&musb->lock, flags);
+ cppi41_trans_done(cppi41_channel);
+ spin_unlock_irqrestore(&musb->lock, flags);
+ } else {
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty) {
+ spin_lock_irqsave(&musb->lock, flags);
+ cppi41_trans_done(cppi41_channel);
+ spin_unlock_irqrestore(&musb->lock, flags);
+ } else {
+ schedule_work(&cppi41_channel->dma_completion);
+ }
+ }
+}
+
+static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
+{
+ struct cppi41_dma_controller *controller;
+ struct cppi41_dma_channel *cppi41_channel, *n;
+ struct musb *musb;
+ unsigned long flags;
+ enum hrtimer_restart ret = HRTIMER_NORESTART;
+
+ controller = container_of(timer, struct cppi41_dma_controller,
+ early_tx);
+ musb = controller->musb;
+
+ spin_lock_irqsave(&musb->lock, flags);
+ list_for_each_entry_safe(cppi41_channel, n, &controller->early_tx_list,
+ tx_check) {
+ bool empty;
+ struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty) {
+ list_del_init(&cppi41_channel->tx_check);
+ cppi41_trans_done(cppi41_channel);
+ }
+ }
+
+ if (!list_empty(&controller->early_tx_list)) {
+ ret = HRTIMER_RESTART;
+ hrtimer_forward_now(&controller->early_tx,
+ ktime_set(0, 150 * NSEC_PER_USEC));
+ }
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+ return ret;
+}
+
+static void cppi41_dma_callback(void *private_data)
+{
+ struct dma_channel *channel = private_data;
+ struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+ struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+ struct musb *musb = hw_ep->musb;
+ unsigned long flags;
+ struct dma_tx_state txstate;
+ u32 transferred;
+ bool empty;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
+ &txstate);
+ transferred = cppi41_channel->prog_len - txstate.residue;
+ cppi41_channel->transferred += transferred;
+
+ dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
+ hw_ep->epnum, cppi41_channel->transferred,
+ cppi41_channel->total_len);
+
+ update_rx_toggle(cppi41_channel);
+
+ if (cppi41_channel->transferred == cppi41_channel->total_len ||
+ transferred < cppi41_channel->packet_sz)
+ cppi41_channel->prog_len = 0;
+
+ if (!cppi41_channel->is_tx) {
+ if (is_isoc(hw_ep, 1))
+ schedule_work(&cppi41_channel->dma_completion);
+ else
+ cppi41_trans_done(cppi41_channel);
+ goto out;
+ }
+
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty) {
+ cppi41_trans_done(cppi41_channel);
+ } else {
+ struct cppi41_dma_controller *controller;
+ /*
+ * On AM335x it has been observed that the TX interrupt fires
+ * too early that means the TXFIFO is not yet empty but the DMA
+ * engine says that it is done with the transfer. We don't
+ * receive a FIFO empty interrupt so the only thing we can do is
+ * to poll for the bit. On HS it usually takes 2us, on FS around
+ * 110us - 150us depending on the transfer size.
+ * We spin on HS (no longer than than 25us and setup a timer on
+ * FS to check for the bit and complete the transfer.
+ */
+ controller = cppi41_channel->controller;
+
+ if (musb->g.speed == USB_SPEED_HIGH) {
+ unsigned wait = 25;
+
+ do {
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty)
+ break;
+ wait--;
+ if (!wait)
+ break;
+ udelay(1);
+ } while (1);
+
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty) {
+ cppi41_trans_done(cppi41_channel);
+ goto out;
+ }
+ }
+ if (is_isoc(hw_ep, 0)) {
+ schedule_work(&cppi41_channel->dma_completion);
+ goto out;
+ }
+ list_add_tail(&cppi41_channel->tx_check,
+ &controller->early_tx_list);
+ if (!hrtimer_is_queued(&controller->early_tx)) {
+ hrtimer_start_range_ns(&controller->early_tx,
+ ktime_set(0, 140 * NSEC_PER_USEC),
+ 40 * NSEC_PER_USEC,
+ HRTIMER_MODE_REL);
+ }
+ }
+out:
spin_unlock_irqrestore(&musb->lock, flags);
}
@@ -340,12 +500,25 @@ static int cppi41_dma_channel_program(struct dma_channel *channel,
dma_addr_t dma_addr, u32 len)
{
int ret;
+ struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+ int hb_mult = 0;
BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
channel->status == MUSB_DMA_STATUS_BUSY);
+ if (is_host_active(cppi41_channel->controller->musb)) {
+ if (cppi41_channel->is_tx)
+ hb_mult = cppi41_channel->hw_ep->out_qh->hb_mult;
+ else
+ hb_mult = cppi41_channel->hw_ep->in_qh->hb_mult;
+ }
+
channel->status = MUSB_DMA_STATUS_BUSY;
channel->actual_len = 0;
+
+ if (hb_mult)
+ packet_sz = hb_mult * (packet_sz & 0x7FF);
+
ret = cppi41_configure_channel(channel, packet_sz, mode, dma_addr, len);
if (!ret)
channel->status = MUSB_DMA_STATUS_FREE;
@@ -364,6 +537,8 @@ static int cppi41_is_compatible(struct dma_channel *channel, u16 maxpacket,
WARN_ON(1);
return 1;
}
+ if (cppi41_channel->hw_ep->ep_in.type != USB_ENDPOINT_XFER_BULK)
+ return 0;
if (cppi41_channel->is_tx)
return 1;
/* AM335x Advisory 1.0.13. No workaround for device RX mode */
@@ -388,6 +563,7 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel)
if (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)
return 0;
+ list_del_init(&cppi41_channel->tx_check);
if (is_tx) {
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~MUSB_TXCSR_DMAENAB;
@@ -484,6 +660,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
if (ret)
goto err;
+ ret = -EINVAL;
if (port > MUSB_DMA_NUM_CHANNELS || !port)
goto err;
if (is_tx)
@@ -494,6 +671,9 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
cppi41_channel->controller = controller;
cppi41_channel->port_num = port;
cppi41_channel->is_tx = is_tx;
+ INIT_LIST_HEAD(&cppi41_channel->tx_check);
+ INIT_WORK(&cppi41_channel->dma_completion,
+ cppi_trans_done_work);
musb_dma = &cppi41_channel->channel;
musb_dma->private_data = cppi41_channel;
@@ -502,7 +682,8 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
dc = dma_request_slave_channel(dev, str);
if (!dc) {
- dev_err(dev, "Falied to request %s.\n", str);
+ dev_err(dev, "Failed to request %s.\n", str);
+ ret = -EPROBE_DEFER;
goto err;
}
cppi41_channel->dc = dc;
@@ -510,7 +691,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
return 0;
err:
cppi41_release_all_dma_chans(controller);
- return -EINVAL;
+ return ret;
}
void dma_controller_destroy(struct dma_controller *c)
@@ -518,6 +699,7 @@ void dma_controller_destroy(struct dma_controller *c)
struct cppi41_dma_controller *controller = container_of(c,
struct cppi41_dma_controller, controller);
+ hrtimer_cancel(&controller->early_tx);
cppi41_dma_controller_stop(controller);
kfree(controller);
}
@@ -526,7 +708,7 @@ struct dma_controller *dma_controller_create(struct musb *musb,
void __iomem *base)
{
struct cppi41_dma_controller *controller;
- int ret;
+ int ret = 0;
if (!musb->controller->of_node) {
dev_err(musb->controller, "Need DT for the DMA engine.\n");
@@ -537,6 +719,9 @@ struct dma_controller *dma_controller_create(struct musb *musb,
if (!controller)
goto kzalloc_fail;
+ hrtimer_init(&controller->early_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ controller->early_tx.function = cppi41_recheck_tx_req;
+ INIT_LIST_HEAD(&controller->early_tx_list);
controller->musb = musb;
controller->controller.channel_alloc = cppi41_dma_channel_allocate;
@@ -553,5 +738,7 @@ struct dma_controller *dma_controller_create(struct musb *musb,
plat_get_fail:
kfree(controller);
kzalloc_fail:
+ if (ret == -EPROBE_DEFER)
+ return ERR_PTR(ret);
return NULL;
}
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 4047cbb91ba..09529f94e72 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -29,14 +29,13 @@
* da8xx.c would be merged to this file after testing.
*/
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include <linux/platform_data/usb-omap.h>
#include <linux/sizes.h>
@@ -46,6 +45,8 @@
#include <linux/of_irq.h>
#include <linux/usb/of.h>
+#include <linux/debugfs.h>
+
#include "musb_core.h"
static const struct of_device_id musb_dsps_of_match[];
@@ -83,6 +84,8 @@ struct dsps_musb_wrapper {
u16 coreintr_status;
u16 phy_utmi;
u16 mode;
+ u16 tx_mode;
+ u16 rx_mode;
/* bit positions for control */
unsigned reset:5;
@@ -106,10 +109,24 @@ struct dsps_musb_wrapper {
/* bit positions for mode */
unsigned iddig:5;
+ unsigned iddig_mux:5;
/* miscellaneous stuff */
u8 poll_seconds;
};
+/*
+ * register shadow for suspend
+ */
+struct dsps_context {
+ u32 control;
+ u32 epintr;
+ u32 coreintr;
+ u32 phy_utmi;
+ u32 mode;
+ u32 tx_mode;
+ u32 rx_mode;
+};
+
/**
* DSPS glue structure.
*/
@@ -119,8 +136,67 @@ struct dsps_glue {
const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
struct timer_list timer; /* otg_workaround timer */
unsigned long last_timer; /* last timer data for each instance */
+
+ struct dsps_context context;
+ struct debugfs_regset32 regset;
+ struct dentry *dbgfs_root;
+};
+
+static const struct debugfs_reg32 dsps_musb_regs[] = {
+ { "revision", 0x00 },
+ { "control", 0x14 },
+ { "status", 0x18 },
+ { "eoi", 0x24 },
+ { "intr0_stat", 0x30 },
+ { "intr1_stat", 0x34 },
+ { "intr0_set", 0x38 },
+ { "intr1_set", 0x3c },
+ { "txmode", 0x70 },
+ { "rxmode", 0x74 },
+ { "autoreq", 0xd0 },
+ { "srpfixtime", 0xd4 },
+ { "tdown", 0xd8 },
+ { "phy_utmi", 0xe0 },
+ { "mode", 0xe8 },
};
+static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+ struct device *dev = musb->controller;
+ struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+
+ if (timeout == 0)
+ timeout = jiffies + msecs_to_jiffies(3);
+
+ /* Never idle if active, or when VBUS timeout is not set as host */
+ if (musb->is_active || (musb->a_wait_bcon == 0 &&
+ musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+ dev_dbg(musb->controller, "%s active, deleting timer\n",
+ usb_otg_state_string(musb->xceiv->state));
+ del_timer(&glue->timer);
+ glue->last_timer = jiffies;
+ return;
+ }
+ if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE)
+ return;
+
+ if (!musb->g.dev.driver)
+ return;
+
+ if (time_after(glue->last_timer, timeout) &&
+ timer_pending(&glue->timer)) {
+ dev_dbg(musb->controller,
+ "Longer idle timer already pending, ignoring...\n");
+ return;
+ }
+ glue->last_timer = timeout;
+
+ dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+ usb_otg_state_string(musb->xceiv->state),
+ jiffies_to_msecs(timeout - jiffies));
+ mod_timer(&glue->timer, timeout);
+}
+
/**
* dsps_musb_enable - enable interrupts
*/
@@ -143,6 +219,7 @@ static void dsps_musb_enable(struct musb *musb)
/* Force the DRVVBUS IRQ so we can start polling for ID change. */
dsps_writel(reg_base, wrp->coreintr_set,
(1 << wrp->drvvbus) << wrp->usb_shift);
+ dsps_musb_try_idle(musb, 0);
}
/**
@@ -171,6 +248,7 @@ static void otg_timer(unsigned long _musb)
const struct dsps_musb_wrapper *wrp = glue->wrp;
u8 devctl;
unsigned long flags;
+ int skip_session = 0;
/*
* We poll because DSPS IP's won't expose several OTG-critical
@@ -183,10 +261,12 @@ static void otg_timer(unsigned long _musb)
spin_lock_irqsave(&musb->lock, flags);
switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_BCON:
- devctl &= ~MUSB_DEVCTL_SESSION;
- dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+ dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ skip_session = 1;
+ /* fall */
- devctl = dsps_readb(musb->mregs, MUSB_DEVCTL);
+ case OTG_STATE_A_IDLE:
+ case OTG_STATE_B_IDLE:
if (devctl & MUSB_DEVCTL_BDEVICE) {
musb->xceiv->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
@@ -194,60 +274,21 @@ static void otg_timer(unsigned long _musb)
musb->xceiv->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
+ if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
+ dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+ mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
break;
case OTG_STATE_A_WAIT_VFALL:
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
dsps_writel(musb->ctrl_base, wrp->coreintr_set,
MUSB_INTR_VBUSERROR << wrp->usb_shift);
break;
- case OTG_STATE_B_IDLE:
- devctl = dsps_readb(mregs, MUSB_DEVCTL);
- if (devctl & MUSB_DEVCTL_BDEVICE)
- mod_timer(&glue->timer,
- jiffies + wrp->poll_seconds * HZ);
- else
- musb->xceiv->state = OTG_STATE_A_IDLE;
- break;
default:
break;
}
spin_unlock_irqrestore(&musb->lock, flags);
}
-static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
-{
- struct device *dev = musb->controller;
- struct dsps_glue *glue = dev_get_drvdata(dev->parent);
-
- if (timeout == 0)
- timeout = jiffies + msecs_to_jiffies(3);
-
- /* Never idle if active, or when VBUS timeout is not set as host */
- if (musb->is_active || (musb->a_wait_bcon == 0 &&
- musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
- dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->state));
- del_timer(&glue->timer);
- glue->last_timer = jiffies;
- return;
- }
- if (musb->port_mode == MUSB_PORT_MODE_HOST)
- return;
-
- if (time_after(glue->last_timer, timeout) &&
- timer_pending(&glue->timer)) {
- dev_dbg(musb->controller,
- "Longer idle timer already pending, ignoring...\n");
- return;
- }
- glue->last_timer = timeout;
-
- dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
- usb_otg_state_string(musb->xceiv->state),
- jiffies_to_msecs(timeout - jiffies));
- mod_timer(&glue->timer, timeout);
-}
-
static irqreturn_t dsps_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
@@ -288,9 +329,21 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
* value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
* Also, DRVVBUS pulses for SRP (but not at 5V) ...
*/
- if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE)
+ if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) {
pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
+ /*
+ * When a babble condition occurs, the musb controller removes
+ * the session and is no longer in host mode. Hence, all
+ * devices connected to its root hub get disconnected.
+ *
+ * Hand this error down to the musb core isr, so it can
+ * recover.
+ */
+ musb->int_usb = MUSB_INTR_BABBLE | MUSB_INTR_DISCONNECT;
+ musb->int_tx = musb->int_rx = 0;
+ }
+
if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
int drvvbus = dsps_readl(reg_base, wrp->status);
void __iomem *mregs = musb->mregs;
@@ -339,8 +392,9 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
if (musb->int_tx || musb->int_rx || musb->int_usb)
ret |= musb_interrupt(musb);
- /* Poll for ID change */
- if (musb->xceiv->state == OTG_STATE_B_IDLE)
+ /* Poll for ID change in OTG port mode */
+ if (musb->xceiv->state == OTG_STATE_B_IDLE &&
+ musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
out:
spin_unlock_irqrestore(&musb->lock, flags);
@@ -348,6 +402,30 @@ out:
return ret;
}
+static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue)
+{
+ struct dentry *root;
+ struct dentry *file;
+ char buf[128];
+
+ sprintf(buf, "%s.dsps", dev_name(musb->controller));
+ root = debugfs_create_dir(buf, NULL);
+ if (!root)
+ return -ENOMEM;
+ glue->dbgfs_root = root;
+
+ glue->regset.regs = dsps_musb_regs;
+ glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs);
+ glue->regset.base = musb->ctrl_base;
+
+ file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset);
+ if (!file) {
+ debugfs_remove_recursive(root);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
static int dsps_musb_init(struct musb *musb)
{
struct device *dev = musb->controller;
@@ -357,6 +435,7 @@ static int dsps_musb_init(struct musb *musb)
void __iomem *reg_base;
struct resource *r;
u32 rev, val;
+ int ret;
r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control");
if (!r)
@@ -390,6 +469,10 @@ static int dsps_musb_init(struct musb *musb)
val &= ~(1 << wrp->otg_disable);
dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
+ ret = dsps_musb_dbg_init(musb, glue);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -399,11 +482,69 @@ static int dsps_musb_exit(struct musb *musb)
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
del_timer_sync(&glue->timer);
-
usb_phy_shutdown(musb->xceiv);
+ debugfs_remove_recursive(glue->dbgfs_root);
+
+ return 0;
+}
+
+static int dsps_musb_set_mode(struct musb *musb, u8 mode)
+{
+ struct device *dev = musb->controller;
+ struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+ void __iomem *ctrl_base = musb->ctrl_base;
+ u32 reg;
+
+ reg = dsps_readl(ctrl_base, wrp->mode);
+
+ switch (mode) {
+ case MUSB_HOST:
+ reg &= ~(1 << wrp->iddig);
+
+ /*
+ * if we're setting mode to host-only or device-only, we're
+ * going to ignore whatever the PHY sends us and just force
+ * ID pin status by SW
+ */
+ reg |= (1 << wrp->iddig_mux);
+
+ dsps_writel(ctrl_base, wrp->mode, reg);
+ dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
+ break;
+ case MUSB_PERIPHERAL:
+ reg |= (1 << wrp->iddig);
+
+ /*
+ * if we're setting mode to host-only or device-only, we're
+ * going to ignore whatever the PHY sends us and just force
+ * ID pin status by SW
+ */
+ reg |= (1 << wrp->iddig_mux);
+
+ dsps_writel(ctrl_base, wrp->mode, reg);
+ break;
+ case MUSB_OTG:
+ dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
+ break;
+ default:
+ dev_err(glue->dev, "unsupported mode %d\n", mode);
+ return -EINVAL;
+ }
+
return 0;
}
+static void dsps_musb_reset(struct musb *musb)
+{
+ struct device *dev = musb->controller;
+ struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+
+ dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
+ udelay(100);
+}
+
static struct musb_platform_ops dsps_ops = {
.init = dsps_musb_init,
.exit = dsps_musb_exit,
@@ -412,6 +553,8 @@ static struct musb_platform_ops dsps_ops = {
.disable = dsps_musb_disable,
.try_idle = dsps_musb_try_idle,
+ .set_mode = dsps_musb_set_mode,
+ .reset = dsps_musb_reset,
};
static u64 musb_dmamask = DMA_BIT_MASK(32);
@@ -443,7 +586,7 @@ static int get_musb_port_mode(struct device *dev)
case USB_DR_MODE_OTG:
default:
return MUSB_PORT_MODE_DUAL_ROLE;
- };
+ }
}
static int dsps_create_musb_pdev(struct dsps_glue *glue,
@@ -505,6 +648,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
config->num_eps = get_int_prop(dn, "mentor,num-eps");
config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
+ config->host_port_deassert_reset_at_resume = 1;
pdata.mode = get_musb_port_mode(dev);
/* DT keeps this entry in mA, musb expects it as per USB spec */
pdata.power = get_int_prop(dn, "mentor,power") / 2;
@@ -535,6 +679,9 @@ static int dsps_probe(struct platform_device *pdev)
struct dsps_glue *glue;
int ret;
+ if (!strcmp(pdev->name, "musb-hdrc"))
+ return -ENODEV;
+
match = of_match_node(musb_dsps_of_match, pdev->dev.of_node);
if (!match) {
dev_err(&pdev->dev, "fail to get matching of_match struct\n");
@@ -543,7 +690,7 @@ static int dsps_probe(struct platform_device *pdev)
wrp = match->data;
/* allocate glue */
- glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
if (!glue) {
dev_err(&pdev->dev, "unable to allocate glue memory\n");
return -ENOMEM;
@@ -571,7 +718,6 @@ err3:
pm_runtime_put(&pdev->dev);
err2:
pm_runtime_disable(&pdev->dev);
- kfree(glue);
return ret;
}
@@ -584,7 +730,7 @@ static int dsps_remove(struct platform_device *pdev)
/* disable usbss clocks */
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- kfree(glue);
+
return 0;
}
@@ -600,9 +746,12 @@ static const struct dsps_musb_wrapper am33xx_driver_data = {
.coreintr_status = 0x34,
.phy_utmi = 0xe0,
.mode = 0xe8,
+ .tx_mode = 0x70,
+ .rx_mode = 0x74,
.reset = 0,
.otg_disable = 21,
.iddig = 8,
+ .iddig_mux = 7,
.usb_shift = 0,
.usb_mask = 0x1ff,
.usb_bitmap = (0x1ff << 0),
@@ -623,12 +772,53 @@ static const struct of_device_id musb_dsps_of_match[] = {
};
MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
+#ifdef CONFIG_PM_SLEEP
+static int dsps_suspend(struct device *dev)
+{
+ struct dsps_glue *glue = dev_get_drvdata(dev);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+ struct musb *musb = platform_get_drvdata(glue->musb);
+ void __iomem *mbase = musb->ctrl_base;
+
+ glue->context.control = dsps_readl(mbase, wrp->control);
+ glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
+ glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
+ glue->context.phy_utmi = dsps_readl(mbase, wrp->phy_utmi);
+ glue->context.mode = dsps_readl(mbase, wrp->mode);
+ glue->context.tx_mode = dsps_readl(mbase, wrp->tx_mode);
+ glue->context.rx_mode = dsps_readl(mbase, wrp->rx_mode);
+
+ return 0;
+}
+
+static int dsps_resume(struct device *dev)
+{
+ struct dsps_glue *glue = dev_get_drvdata(dev);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+ struct musb *musb = platform_get_drvdata(glue->musb);
+ void __iomem *mbase = musb->ctrl_base;
+
+ dsps_writel(mbase, wrp->control, glue->context.control);
+ dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
+ dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
+ dsps_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
+ dsps_writel(mbase, wrp->mode, glue->context.mode);
+ dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
+ dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
+
static struct platform_driver dsps_usbss_driver = {
.probe = dsps_probe,
.remove = dsps_remove,
.driver = {
.name = "musb-dsps",
- .of_match_table = of_match_ptr(musb_dsps_of_match),
+ .pm = &dsps_pm_ops,
+ .of_match_table = musb_dsps_of_match,
},
};
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 9a08679d204..d4aa779339f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1121,7 +1121,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
case USB_ENDPOINT_XFER_BULK: s = "bulk"; break;
case USB_ENDPOINT_XFER_INT: s = "int"; break;
default: s = "iso"; break;
- }; s; }),
+ } s; }),
musb_ep->is_in ? "IN" : "OUT",
musb_ep->dma ? "dma, " : "",
musb_ep->packet_sz);
@@ -1727,14 +1727,14 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
ep->end_point.name = ep->name;
INIT_LIST_HEAD(&ep->end_point.ep_list);
if (!epnum) {
- ep->end_point.maxpacket = 64;
+ usb_ep_set_maxpacket_limit(&ep->end_point, 64);
ep->end_point.ops = &musb_g_ep0_ops;
musb->g.ep0 = &ep->end_point;
} else {
if (is_in)
- ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
+ usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_tx);
else
- ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
+ usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_rx);
ep->end_point.ops = &musb_ep_ops;
list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
}
@@ -1790,9 +1790,17 @@ int musb_gadget_setup(struct musb *musb)
musb->g.max_speed = USB_SPEED_HIGH;
musb->g.speed = USB_SPEED_UNKNOWN;
+ MUSB_DEV_MODE(musb);
+ musb->xceiv->otg->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
+
/* this "gadget" abstracts/virtualizes the controller */
musb->g.name = musb_driver_name;
+#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE)
musb->g.is_otg = 1;
+#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET)
+ musb->g.is_otg = 0;
+#endif
musb_g_init_endpoints(musb);
@@ -1855,6 +1863,8 @@ static int musb_gadget_start(struct usb_gadget *g,
musb->xceiv->state = OTG_STATE_B_IDLE;
spin_unlock_irqrestore(&musb->lock, flags);
+ musb_start(musb);
+
/* REVISIT: funcall to other code, which also
* handles power budgeting ... this way also
* ensures HdrcStart is indirectly called.
@@ -2109,7 +2119,15 @@ __acquires(musb->lock)
/* Normal reset, as B-Device;
* or else after HNP, as A-Device
*/
- if (devctl & MUSB_DEVCTL_BDEVICE) {
+ if (!musb->g.is_otg) {
+ /* USB device controllers that are not OTG compatible
+ * may not have DEVCTL register in silicon.
+ * In that case, do not rely on devctl for setting
+ * peripheral mode.
+ */
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->g.is_a_peripheral = 0;
+ } else if (devctl & MUSB_DEVCTL_BDEVICE) {
musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->g.is_a_peripheral = 0;
} else {
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 9a2b8c85f19..eb06291a40c 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -39,7 +39,6 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/list.h>
#include <linux/dma-mapping.h>
@@ -253,7 +252,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_BULK: s = "-bulk"; break;
case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
default: s = "-intr"; break;
- }; s; }),
+ } s; }),
epnum, buf + offset, len);
/* Configure endpoint */
@@ -1184,6 +1183,9 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
csr = MUSB_CSR0_H_STATUSPKT
| MUSB_CSR0_TXPKTRDY;
+ /* disable ping token in status phase */
+ csr |= MUSB_CSR0_H_DIS_PING;
+
/* flag status stage */
musb->ep0_stage = MUSB_EP0_STATUS;
@@ -1692,7 +1694,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
| MUSB_RXCSR_RXPKTRDY);
musb_writew(hw_ep->regs, MUSB_RXCSR, val);
-#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \
+ defined(CONFIG_USB_TI_CPPI41_DMA)
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
@@ -1705,10 +1708,30 @@ void musb_host_rx(struct musb *musb, u8 epnum)
if (d->status != -EILSEQ && d->status != -EOVERFLOW)
d->status = 0;
- if (++qh->iso_idx >= urb->number_of_packets)
+ if (++qh->iso_idx >= urb->number_of_packets) {
done = true;
- else
+ } else {
+#if defined(CONFIG_USB_TI_CPPI41_DMA)
+ struct dma_controller *c;
+ dma_addr_t *buf;
+ u32 length, ret;
+
+ c = musb->dma_controller;
+ buf = (void *)
+ urb->iso_frame_desc[qh->iso_idx].offset
+ + (u32)urb->transfer_dma;
+
+ length =
+ urb->iso_frame_desc[qh->iso_idx].length;
+
+ val |= MUSB_RXCSR_DMAENAB;
+ musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+ ret = c->channel_program(dma, qh->maxpacket,
+ 0, (u32) buf, length);
+#endif
done = false;
+ }
} else {
/* done if urb buffer is full or short packet is recd */
@@ -1748,7 +1771,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
}
/* we are expecting IN packets */
-#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \
+ defined(CONFIG_USB_TI_CPPI41_DMA)
if (dma) {
struct dma_controller *c;
u16 rx_count;
@@ -2013,7 +2037,7 @@ static int musb_schedule(
head = &musb->out_bulk;
/* Enable bulk RX/TX NAK timeout scheme when bulk requests are
- * multiplexed. This scheme doen't work in high speed to full
+ * multiplexed. This scheme does not work in high speed to full
* speed scenario as NAK interrupts are not coming from a
* full speed device connected to a high speed device.
* NAK timeout interval is 8 (128 uframe or 16ms) for HS and
@@ -2433,6 +2457,8 @@ static int musb_bus_suspend(struct usb_hcd *hcd)
struct musb *musb = hcd_to_musb(hcd);
u8 devctl;
+ musb_port_suspend(musb, true);
+
if (!is_host_active(musb))
return 0;
@@ -2462,7 +2488,12 @@ static int musb_bus_suspend(struct usb_hcd *hcd)
static int musb_bus_resume(struct usb_hcd *hcd)
{
- /* resuming child port does the work */
+ struct musb *musb = hcd_to_musb(hcd);
+
+ if (musb->config &&
+ musb->config->host_port_deassert_reset_at_resume)
+ musb_port_reset(musb, false);
+
return 0;
}
@@ -2657,6 +2688,7 @@ int musb_host_setup(struct musb *musb, int power_budget)
if (ret < 0)
return ret;
+ device_wakeup_enable(hcd->self.controller);
return 0;
}
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 960d73570b2..7bbf01bf4bb 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -92,6 +92,9 @@ extern void musb_host_rx(struct musb *, u8);
extern void musb_root_disconnect(struct musb *musb);
extern void musb_host_resume_root_hub(struct musb *musb);
extern void musb_host_poke_root_hub(struct musb *musb);
+extern void musb_port_suspend(struct musb *musb, bool do_suspend);
+extern void musb_port_reset(struct musb *musb, bool do_reset);
+extern void musb_host_finish_resume(struct work_struct *work);
#else
static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
{
@@ -121,6 +124,9 @@ static inline void musb_root_disconnect(struct musb *musb) {}
static inline void musb_host_resume_root_hub(struct musb *musb) {}
static inline void musb_host_poll_rh_status(struct musb *musb) {}
static inline void musb_host_poke_root_hub(struct musb *musb) {}
+static inline void musb_port_suspend(struct musb *musb, bool do_suspend) {}
+static inline void musb_port_reset(struct musb *musb, bool do_reset) {}
+static inline void musb_host_finish_resume(struct work_struct *work) {}
#endif
struct usb_hcd;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index a523950c2b3..e2d2d8c9891 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -36,7 +36,6 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/time.h>
#include <linux/timer.h>
@@ -44,53 +43,38 @@
#include "musb_core.h"
-/*
-* Program the HDRC to start (enable interrupts, dma, etc.).
-*/
-static void musb_start(struct musb *musb)
+void musb_host_finish_resume(struct work_struct *work)
{
- void __iomem *regs = musb->mregs;
- u8 devctl = musb_readb(regs, MUSB_DEVCTL);
-
- dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
-
- /* Set INT enable registers, enable interrupts */
- musb->intrtxe = musb->epmask;
- musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
- musb->intrrxe = musb->epmask & 0xfffe;
- musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
- musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+ struct musb *musb;
+ unsigned long flags;
+ u8 power;
- musb_writeb(regs, MUSB_TESTMODE, 0);
+ musb = container_of(work, struct musb, finish_resume_work.work);
- /* put into basic highspeed mode and start session */
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
+ spin_lock_irqsave(&musb->lock, flags);
- musb->is_active = 0;
- devctl = musb_readb(regs, MUSB_DEVCTL);
- devctl &= ~MUSB_DEVCTL_SESSION;
+ power = musb_readb(musb->mregs, MUSB_POWER);
+ power &= ~MUSB_POWER_RESUME;
+ dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
+ power);
+ musb_writeb(musb->mregs, MUSB_POWER, power);
- /* session started after:
- * (a) ID-grounded irq, host mode;
- * (b) vbus present/connect IRQ, peripheral mode;
- * (c) peripheral initiates, using SRP
+ /*
+ * ISSUE: DaVinci (RTL 1.300) disconnects after
+ * resume of high speed peripherals (but not full
+ * speed ones).
*/
- if (musb->port_mode != MUSB_PORT_MODE_HOST &&
- (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
- musb->is_active = 1;
- } else {
- devctl |= MUSB_DEVCTL_SESSION;
- }
+ musb->is_active = 1;
+ musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
+ musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+ usb_hcd_poll_rh_status(musb->hcd);
+ /* NOTE: it might really be A_WAIT_BCON ... */
+ musb->xceiv->state = OTG_STATE_A_HOST;
- musb_platform_enable(musb);
- musb_writeb(regs, MUSB_DEVCTL, devctl);
+ spin_unlock_irqrestore(&musb->lock, flags);
}
-static void musb_port_suspend(struct musb *musb, bool do_suspend)
+void musb_port_suspend(struct musb *musb, bool do_suspend)
{
struct usb_otg *otg = musb->xceiv->otg;
u8 power;
@@ -151,11 +135,12 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
/* later, GetPortStatus will stop RESUME signaling */
musb->port1_status |= MUSB_PORT_STAT_RESUME;
- musb->rh_timer = jiffies + msecs_to_jiffies(20);
+ schedule_delayed_work(&musb->finish_resume_work,
+ msecs_to_jiffies(20));
}
}
-static void musb_port_reset(struct musb *musb, bool do_reset)
+void musb_port_reset(struct musb *musb, bool do_reset)
{
u8 power;
void __iomem *mbase = musb->mregs;
@@ -174,7 +159,6 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
*/
power = musb_readb(mbase, MUSB_POWER);
if (do_reset) {
-
/*
* If RESUME is set, we must make sure it stays minimum 20 ms.
* Then we must clear RESUME and wait a bit to let musb start
@@ -183,11 +167,22 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
* detected".
*/
if (power & MUSB_POWER_RESUME) {
- while (time_before(jiffies, musb->rh_timer))
- msleep(1);
+ long remain = (unsigned long) musb->rh_timer - jiffies;
+
+ if (musb->rh_timer > 0 && remain > 0) {
+ /* take into account the minimum delay after resume */
+ schedule_delayed_work(
+ &musb->deassert_reset_work, remain);
+ return;
+ }
+
musb_writeb(mbase, MUSB_POWER,
- power & ~MUSB_POWER_RESUME);
- msleep(1);
+ power & ~MUSB_POWER_RESUME);
+
+ /* Give the core 1 ms to clear MUSB_POWER_RESUME */
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(1));
+ return;
}
power &= 0xf0;
@@ -196,7 +191,8 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
musb->port1_status |= USB_PORT_STAT_RESET;
musb->port1_status &= ~USB_PORT_STAT_ENABLE;
- musb->rh_timer = jiffies + msecs_to_jiffies(50);
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(50));
} else {
dev_dbg(musb->controller, "root port reset stopped\n");
musb_writeb(mbase, MUSB_POWER,
@@ -266,6 +262,23 @@ int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
return retval;
}
+static int musb_has_gadget(struct musb *musb)
+{
+ /*
+ * In host-only mode we start a connection right away. In OTG mode
+ * we have to wait until we loaded a gadget. We don't really need a
+ * gadget if we operate as a host but we should not start a session
+ * as a device without a gadget or else we explode.
+ */
+#ifdef CONFIG_USB_MUSB_HOST
+ return 1;
+#else
+ if (musb->port_mode == MUSB_PORT_MODE_HOST)
+ return 1;
+ return musb->g.dev.driver != NULL;
+#endif
+}
+
int musb_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
@@ -354,36 +367,6 @@ int musb_hub_control(
if (wIndex != 1)
goto error;
- /* finish RESET signaling? */
- if ((musb->port1_status & USB_PORT_STAT_RESET)
- && time_after_eq(jiffies, musb->rh_timer))
- musb_port_reset(musb, false);
-
- /* finish RESUME signaling? */
- if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
- && time_after_eq(jiffies, musb->rh_timer)) {
- u8 power;
-
- power = musb_readb(musb->mregs, MUSB_POWER);
- power &= ~MUSB_POWER_RESUME;
- dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
- power);
- musb_writeb(musb->mregs, MUSB_POWER, power);
-
- /* ISSUE: DaVinci (RTL 1.300) disconnects after
- * resume of high speed peripherals (but not full
- * speed ones).
- */
-
- musb->is_active = 1;
- musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
- | MUSB_PORT_STAT_RESUME);
- musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
- usb_hcd_poll_rh_status(musb->hcd);
- /* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv->state = OTG_STATE_A_HOST;
- }
-
put_unaligned(cpu_to_le32(musb->port1_status
& ~MUSB_PORT_STAT_RESUME),
(__le32 *) buf);
@@ -408,7 +391,7 @@ int musb_hub_control(
* initialization logic, e.g. for OTG, or change any
* logic relating to VBUS power-up.
*/
- if (!hcd->self.is_b_host)
+ if (!hcd->self.is_b_host && musb_has_gadget(musb))
musb_start(musb);
break;
case USB_PORT_FEAT_RESET:
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 59d2245db1c..d369bf1f393 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -37,7 +37,8 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/usb/musb-omap.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
+#include <linux/of_platform.h>
#include "musb_core.h"
#include "omap2430.h"
@@ -305,6 +306,9 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
default:
dev_dbg(dev, "ID float\n");
}
+
+ atomic_notifier_call_chain(&musb->xceiv->notifier,
+ musb->xceiv->last_event, NULL);
}
@@ -312,7 +316,13 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
{
struct omap2430_glue *glue = container_of(mailbox_work,
struct omap2430_glue, omap_musb_mailbox_work);
+ struct musb *musb = glue_to_musb(glue);
+ struct device *dev = musb->controller;
+
+ pm_runtime_get_sync(dev);
omap_musb_set_mailbox(glue);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
@@ -348,11 +358,21 @@ static int omap2430_musb_init(struct musb *musb)
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
*/
- if (dev->parent->of_node)
+ if (dev->parent->of_node) {
+ musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+ /* We can't totally remove musb->xceiv as of now because
+ * musb core uses xceiv.state and xceiv.otg. Once we have
+ * a separate state machine to handle otg, these can be moved
+ * out of xceiv and then we can start using the generic PHY
+ * framework
+ */
musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
"usb-phy", 0);
- else
+ } else {
musb->xceiv = devm_usb_get_phy_dev(dev, 0);
+ musb->phy = devm_phy_get(dev, "usb");
+ }
if (IS_ERR(musb->xceiv)) {
status = PTR_ERR(musb->xceiv);
@@ -364,6 +384,10 @@ static int omap2430_musb_init(struct musb *musb)
return -EPROBE_DEFER;
}
+ if (IS_ERR(musb->phy)) {
+ pr_err("HS USB OTG: no PHY configured\n");
+ return PTR_ERR(musb->phy);
+ }
musb->isr = omap2430_musb_interrupt;
status = pm_runtime_get_sync(dev);
@@ -397,7 +421,8 @@ static int omap2430_musb_init(struct musb *musb)
if (glue->status != OMAP_MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);
- usb_phy_init(musb->xceiv);
+ phy_init(musb->phy);
+ phy_power_on(musb->phy);
pm_runtime_put_noidle(musb->controller);
return 0;
@@ -460,6 +485,8 @@ static int omap2430_musb_exit(struct musb *musb)
del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
+ phy_power_off(musb->phy);
+ phy_exit(musb->phy);
return 0;
}
@@ -509,8 +536,12 @@ static int omap2430_probe(struct platform_device *pdev)
glue->dev = &pdev->dev;
glue->musb = musb;
glue->status = OMAP_MUSB_UNKNOWN;
+ glue->control_otghs = ERR_PTR(-ENODEV);
if (np) {
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(&pdev->dev,
@@ -539,22 +570,20 @@ static int omap2430_probe(struct platform_device *pdev)
of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
of_property_read_u32(np, "power", (u32 *)&pdata->power);
config->multipoint = of_property_read_bool(np, "multipoint");
- pdata->has_mailbox = of_property_read_bool(np,
- "ti,has-mailbox");
pdata->board_data = data;
pdata->config = config;
- }
- if (pdata->has_mailbox) {
- glue->control_otghs = omap_get_control_dev();
- if (IS_ERR(glue->control_otghs)) {
- dev_vdbg(&pdev->dev, "Failed to get control device\n");
- ret = PTR_ERR(glue->control_otghs);
- goto err2;
+ control_node = of_parse_phandle(np, "ctrl-module", 0);
+ if (control_node) {
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(&pdev->dev, "Failed to get control device\n");
+ ret = -EINVAL;
+ goto err2;
+ }
+ glue->control_otghs = &control_pdev->dev;
}
- } else {
- glue->control_otghs = ERR_PTR(-ENODEV);
}
pdata->platform_ops = &omap2430_ops;
@@ -638,7 +667,6 @@ static int omap2430_runtime_suspend(struct device *dev)
OTG_INTERFSEL);
omap2430_low_level_exit(musb);
- usb_phy_set_suspend(musb->xceiv, 1);
}
return 0;
@@ -653,8 +681,6 @@ static int omap2430_runtime_resume(struct device *dev)
omap2430_low_level_init(musb);
musb_writel(musb->mregs, OTG_INTERFSEL,
musb->context.otg_interfsel);
-
- usb_phy_set_suspend(musb->xceiv, 0);
}
return 0;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index b3b3ed72388..159ef4be1ef 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -18,20 +18,20 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/init.h>
#include <linux/prefetch.h>
#include <linux/usb.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include "musb_core.h"
struct tusb6010_glue {
struct device *dev;
struct platform_device *musb;
+ struct platform_device *phy;
};
static void tusb_musb_set_vbus(struct musb *musb, int is_on);
@@ -43,7 +43,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on);
* Checks the revision. We need to use the DMA register as 3.0 does not
* have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
*/
-u8 tusb_get_revision(struct musb *musb)
+static u8 tusb_get_revision(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
u32 die_id;
@@ -59,14 +59,13 @@ u8 tusb_get_revision(struct musb *musb)
return rev;
}
-EXPORT_SYMBOL_GPL(tusb_get_revision);
-static int tusb_print_revision(struct musb *musb)
+static void tusb_print_revision(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
u8 rev;
- rev = tusb_get_revision(musb);
+ rev = musb->tusb_revision;
pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
"prcm",
@@ -85,8 +84,6 @@ static int tusb_print_revision(struct musb *musb)
TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
"rev",
TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
-
- return tusb_get_revision(musb);
}
#define WBUS_QUIRK_MASK (TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
@@ -350,7 +347,7 @@ static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
u32 reg;
if ((wakeup_enables & TUSB_PRCM_WBUS)
- && (tusb_get_revision(musb) == TUSB_REV_30))
+ && (musb->tusb_revision == TUSB_REV_30))
tusb_wbus_quirk(musb, 1);
tusb_set_clock_source(musb, 0);
@@ -798,7 +795,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
u32 reg;
u32 i;
- if (tusb_get_revision(musb) == TUSB_REV_30)
+ if (musb->tusb_revision == TUSB_REV_30)
tusb_wbus_quirk(musb, 0);
/* there are issues re-locking the PLL on wakeup ... */
@@ -1012,10 +1009,11 @@ static int tusb_musb_start(struct musb *musb)
goto err;
}
- ret = tusb_print_revision(musb);
- if (ret < 2) {
+ musb->tusb_revision = tusb_get_revision(musb);
+ tusb_print_revision(musb);
+ if (musb->tusb_revision < 2) {
printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
- ret);
+ musb->tusb_revision);
goto err;
}
@@ -1066,7 +1064,6 @@ static int tusb_musb_init(struct musb *musb)
void __iomem *sync = NULL;
int ret;
- usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
return -EPROBE_DEFER;
@@ -1118,7 +1115,6 @@ done:
iounmap(sync);
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
}
return ret;
}
@@ -1134,7 +1130,6 @@ static int tusb_musb_exit(struct musb *musb)
iounmap(musb->sync_va);
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
return 0;
}
@@ -1152,7 +1147,11 @@ static const struct musb_platform_ops tusb_ops = {
.set_vbus = tusb_musb_set_vbus,
};
-static u64 tusb_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info tusb_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
static int tusb_probe(struct platform_device *pdev)
{
@@ -1160,7 +1159,7 @@ static int tusb_probe(struct platform_device *pdev)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct platform_device *musb;
struct tusb6010_glue *glue;
-
+ struct platform_device_info pinfo;
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -1169,21 +1168,11 @@ static int tusb_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err1;
- }
-
- musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = &tusb_dmamask;
- musb->dev.coherent_dma_mask = tusb_dmamask;
-
glue->dev = &pdev->dev;
- glue->musb = musb;
pdata->platform_ops = &tusb_ops;
+ usb_phy_generic_register();
platform_set_drvdata(pdev, glue);
memset(musb_resources, 0x00, sizeof(*musb_resources) *
@@ -1204,31 +1193,23 @@ static int tusb_probe(struct platform_device *pdev)
musb_resources[2].end = pdev->resource[2].end;
musb_resources[2].flags = pdev->resource[2].flags;
- ret = platform_device_add_resources(musb, musb_resources,
- ARRAY_SIZE(musb_resources));
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto err3;
- }
-
- ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
- if (ret) {
- dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err3;
- }
-
- ret = platform_device_add(musb);
- if (ret) {
- dev_err(&pdev->dev, "failed to register musb device\n");
+ pinfo = tusb_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = musb_resources;
+ pinfo.num_res = ARRAY_SIZE(musb_resources);
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
goto err3;
}
return 0;
err3:
- platform_device_put(musb);
-
-err1:
kfree(glue);
err0:
@@ -1240,6 +1221,7 @@ static int tusb_remove(struct platform_device *pdev)
struct tusb6010_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister(glue->phy);
kfree(glue);
return 0;
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index 35c933a5d99..aec86c86ce3 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -12,14 +12,6 @@
#ifndef __TUSB6010_H__
#define __TUSB6010_H__
-extern u8 tusb_get_revision(struct musb *musb);
-
-#ifdef CONFIG_USB_TUSB6010
-#define musb_in_tusb() 1
-#else
-#define musb_in_tusb() 0
-#endif
-
#ifdef CONFIG_USB_TUSB_OMAP_DMA
#define tusb_dma_omap() 1
#else
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index b8794eb81e9..3ce152c0408 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -11,7 +11,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
@@ -678,7 +677,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba
tusb_dma->controller.channel_program = tusb_omap_dma_program;
tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
- if (tusb_get_revision(musb) >= TUSB_REV_30)
+ if (musb->tusb_revision >= TUSB_REV_30)
tusb_dma->multichannel = 1;
for (i = 0; i < MAX_DMAREQ; i++) {
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 59256b12f74..f202e508846 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -21,7 +21,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -259,7 +258,7 @@ static int ux500_probe(struct platform_device *pdev)
goto err1;
}
- clk = clk_get(&pdev->dev, "usb");
+ clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
ret = PTR_ERR(clk);
@@ -275,7 +274,6 @@ static int ux500_probe(struct platform_device *pdev)
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &pdev->dev.coherent_dma_mask;
musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask;
- musb->dev.of_node = pdev->dev.of_node;
glue->dev = &pdev->dev;
glue->musb = musb;
@@ -376,17 +374,10 @@ static int ux500_resume(struct device *dev)
return 0;
}
-
-static const struct dev_pm_ops ux500_pm_ops = {
- .suspend = ux500_suspend,
- .resume = ux500_resume,
-};
-
-#define DEV_PM_OPS (&ux500_pm_ops)
-#else
-#define DEV_PM_OPS NULL
#endif
+static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume);
+
static const struct of_device_id ux500_match[] = {
{ .compatible = "stericsson,db8500-musb", },
{}
@@ -397,7 +388,7 @@ static struct platform_driver ux500_driver = {
.remove = ux500_remove,
.driver = {
.name = "musb-ux500",
- .pm = DEV_PM_OPS,
+ .pm = &ux500_pm_ops,
.of_match_table = ux500_match,
},
};
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 3700e971325..9aad00f11bd 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -336,7 +336,9 @@ static int ux500_dma_controller_start(struct ux500_dma_controller *controller)
data ?
data->dma_filter :
NULL,
- param_array[ch_num]);
+ param_array ?
+ param_array[ch_num] :
+ NULL);
if (!ux500_channel->dma_chan) {
ERR("Dma pipe allocation error dir=%d ch=%d\n",
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-04 06:07:23 +0000