diff options
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 4156 |
1 files changed, 0 insertions, 4156 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c deleted file mode 100644 index fc5c63f4f57..00000000000 --- a/drivers/net/e1000e/netdev.c +++ /dev/null @@ -1,4156 +0,0 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/vmalloc.h> -#include <linux/pagemap.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/tcp.h> -#include <linux/ipv6.h> -#include <net/checksum.h> -#include <net/ip6_checksum.h> -#include <linux/mii.h> -#include <linux/ethtool.h> -#include <linux/if_vlan.h> -#include <linux/cpu.h> -#include <linux/smp.h> - -#include "e1000.h" - -#define DRV_VERSION "0.2.0" -char e1000e_driver_name[] = "e1000e"; -const char e1000e_driver_version[] = DRV_VERSION; - -static const struct e1000_info *e1000_info_tbl[] = { - [board_82571] = &e1000_82571_info, - [board_82572] = &e1000_82572_info, - [board_82573] = &e1000_82573_info, - [board_80003es2lan] = &e1000_es2_info, - [board_ich8lan] = &e1000_ich8_info, - [board_ich9lan] = &e1000_ich9_info, -}; - -#ifdef DEBUG -/** - * e1000_get_hw_dev_name - return device name string - * used by hardware layer to print debugging information - **/ -char *e1000e_get_hw_dev_name(struct e1000_hw *hw) -{ - return hw->adapter->netdev->name; -} -#endif - -/** - * e1000_desc_unused - calculate if we have unused descriptors - **/ -static int e1000_desc_unused(struct e1000_ring *ring) -{ - if (ring->next_to_clean > ring->next_to_use) - return ring->next_to_clean - ring->next_to_use - 1; - - return ring->count + ring->next_to_clean - ring->next_to_use - 1; -} - -/** - * e1000_receive_skb - helper function to handle rx indications - * @adapter: board private structure - * @status: descriptor status field as written by hardware - * @vlan: descriptor vlan field as written by hardware (no le/be conversion) - * @skb: pointer to sk_buff to be indicated to stack - **/ -static void e1000_receive_skb(struct e1000_adapter *adapter, - struct net_device *netdev, - struct sk_buff *skb, - u8 status, __le16 vlan) -{ - skb->protocol = eth_type_trans(skb, netdev); - - if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) - vlan_hwaccel_receive_skb(skb, adapter->vlgrp, - le16_to_cpu(vlan) & - E1000_RXD_SPC_VLAN_MASK); - else - netif_receive_skb(skb); - - netdev->last_rx = jiffies; -} - -/** - * e1000_rx_checksum - Receive Checksum Offload for 82543 - * @adapter: board private structure - * @status_err: receive descriptor status and error fields - * @csum: receive descriptor csum field - * @sk_buff: socket buffer with received data - **/ -static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, - u32 csum, struct sk_buff *skb) -{ - u16 status = (u16)status_err; - u8 errors = (u8)(status_err >> 24); - skb->ip_summed = CHECKSUM_NONE; - - /* Ignore Checksum bit is set */ - if (status & E1000_RXD_STAT_IXSM) - return; - /* TCP/UDP checksum error bit is set */ - if (errors & E1000_RXD_ERR_TCPE) { - /* let the stack verify checksum errors */ - adapter->hw_csum_err++; - return; - } - - /* TCP/UDP Checksum has not been calculated */ - if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) - return; - - /* It must be a TCP or UDP packet with a valid checksum */ - if (status & E1000_RXD_STAT_TCPCS) { - /* TCP checksum is good */ - skb->ip_summed = CHECKSUM_UNNECESSARY; - } else { - /* IP fragment with UDP payload */ - /* Hardware complements the payload checksum, so we undo it - * and then put the value in host order for further stack use. - */ - __sum16 sum = (__force __sum16)htons(csum); - skb->csum = csum_unfold(~sum); - skb->ip_summed = CHECKSUM_COMPLETE; - } - adapter->hw_csum_good++; -} - -/** - * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended - * @adapter: address of board private structure - **/ -static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, - int cleaned_count) -{ - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *rx_ring = adapter->rx_ring; - struct e1000_rx_desc *rx_desc; - struct e1000_buffer *buffer_info; - struct sk_buff *skb; - unsigned int i; - unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; - - i = rx_ring->next_to_use; - buffer_info = &rx_ring->buffer_info[i]; - - while (cleaned_count--) { - skb = buffer_info->skb; - if (skb) { - skb_trim(skb, 0); - goto map_skb; - } - - skb = netdev_alloc_skb(netdev, bufsz); - if (!skb) { - /* Better luck next round */ - adapter->alloc_rx_buff_failed++; - break; - } - - /* Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); - - buffer_info->skb = skb; -map_skb: - buffer_info->dma = pci_map_single(pdev, skb->data, - adapter->rx_buffer_len, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(buffer_info->dma)) { - dev_err(&pdev->dev, "RX DMA map failed\n"); - adapter->rx_dma_failed++; - break; - } - - rx_desc = E1000_RX_DESC(*rx_ring, i); - rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); - - i++; - if (i == rx_ring->count) - i = 0; - buffer_info = &rx_ring->buffer_info[i]; - } - - if (rx_ring->next_to_use != i) { - rx_ring->next_to_use = i; - if (i-- == 0) - i = (rx_ring->count - 1); - - /* Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). */ - wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); - } -} - -/** - * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split - * @adapter: address of board private structure - **/ -static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, - int cleaned_count) -{ - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - union e1000_rx_desc_packet_split *rx_desc; - struct e1000_ring *rx_ring = adapter->rx_ring; - struct e1000_buffer *buffer_info; - struct e1000_ps_page *ps_page; - struct sk_buff *skb; - unsigned int i, j; - - i = rx_ring->next_to_use; - buffer_info = &rx_ring->buffer_info[i]; - - while (cleaned_count--) { - rx_desc = E1000_RX_DESC_PS(*rx_ring, i); - - for (j = 0; j < PS_PAGE_BUFFERS; j++) { - ps_page = &buffer_info->ps_pages[j]; - if (j >= adapter->rx_ps_pages) { - /* all unused desc entries get hw null ptr */ - rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0); - continue; - } - if (!ps_page->page) { - ps_page->page = alloc_page(GFP_ATOMIC); - if (!ps_page->page) { - adapter->alloc_rx_buff_failed++; - goto no_buffers; - } - ps_page->dma = pci_map_page(pdev, - ps_page->page, - 0, PAGE_SIZE, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(ps_page->dma)) { - dev_err(&adapter->pdev->dev, - "RX DMA page map failed\n"); - adapter->rx_dma_failed++; - goto no_buffers; - } - } - /* - * Refresh the desc even if buffer_addrs - * didn't change because each write-back - * erases this info. - */ - rx_desc->read.buffer_addr[j+1] = - cpu_to_le64(ps_page->dma); - } - - skb = netdev_alloc_skb(netdev, - adapter->rx_ps_bsize0 + NET_IP_ALIGN); - - if (!skb) { - adapter->alloc_rx_buff_failed++; - break; - } - - /* Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); - - buffer_info->skb = skb; - buffer_info->dma = pci_map_single(pdev, skb->data, - adapter->rx_ps_bsize0, - PCI_DMA_FROMDEVICE); - if (pci_dma_mapping_error(buffer_info->dma)) { - dev_err(&pdev->dev, "RX DMA map failed\n"); - adapter->rx_dma_failed++; - /* cleanup skb */ - dev_kfree_skb_any(skb); - buffer_info->skb = NULL; - break; - } - - rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); - - i++; - if (i == rx_ring->count) - i = 0; - buffer_info = &rx_ring->buffer_info[i]; - } - -no_buffers: - if (rx_ring->next_to_use != i) { - rx_ring->next_to_use = i; - - if (!(i--)) - i = (rx_ring->count - 1); - - /* Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). */ - wmb(); - /* Hardware increments by 16 bytes, but packet split - * descriptors are 32 bytes...so we increment tail - * twice as much. - */ - writel(i<<1, adapter->hw.hw_addr + rx_ring->tail); - } -} - -/** - * e1000_clean_rx_irq - Send received data up the network stack; legacy - * @adapter: board private structure - * - * the return value indicates whether actual cleaning was done, there - * is no guarantee that everything was cleaned - **/ -static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, - int *work_done, int work_to_do) -{ - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *rx_ring = adapter->rx_ring; - struct e1000_rx_desc *rx_desc, *next_rxd; - struct e1000_buffer *buffer_info, *next_buffer; - u32 length; - unsigned int i; - int cleaned_count = 0; - bool cleaned = 0; - unsigned int total_rx_bytes = 0, total_rx_packets = 0; - - i = rx_ring->next_to_clean; - rx_desc = E1000_RX_DESC(*rx_ring, i); - buffer_info = &rx_ring->buffer_info[i]; - - while (rx_desc->status & E1000_RXD_STAT_DD) { - struct sk_buff *skb; - u8 status; - - if (*work_done >= work_to_do) - break; - (*work_done)++; - - status = rx_desc->status; - skb = buffer_info->skb; - buffer_info->skb = NULL; - - prefetch(skb->data - NET_IP_ALIGN); - - i++; - if (i == rx_ring->count) - i = 0; - next_rxd = E1000_RX_DESC(*rx_ring, i); - prefetch(next_rxd); - - next_buffer = &rx_ring->buffer_info[i]; - - cleaned = 1; - cleaned_count++; - pci_unmap_single(pdev, - buffer_info->dma, - adapter->rx_buffer_len, - PCI_DMA_FROMDEVICE); - buffer_info->dma = 0; - - length = le16_to_cpu(rx_desc->length); - - /* !EOP means multiple descriptors were used to store a single - * packet, also make sure the frame isn't just CRC only */ - if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { - /* All receives must fit into a single buffer */ - ndev_dbg(netdev, "%s: Receive packet consumed " - "multiple buffers\n", netdev->name); - /* recycle */ - buffer_info->skb = skb; - goto next_desc; - } - - if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) { - /* recycle */ - buffer_info->skb = skb; - goto next_desc; - } - - total_rx_bytes += length; - total_rx_packets++; - - /* code added for copybreak, this should improve - * performance for small packets with large amounts - * of reassembly being done in the stack */ - if (length < copybreak) { - struct sk_buff *new_skb = - netdev_alloc_skb(netdev, length + NET_IP_ALIGN); - if (new_skb) { - skb_reserve(new_skb, NET_IP_ALIGN); - memcpy(new_skb->data - NET_IP_ALIGN, - skb->data - NET_IP_ALIGN, - length + NET_IP_ALIGN); - /* save the skb in buffer_info as good */ - buffer_info->skb = skb; - skb = new_skb; - } - /* else just continue with the old one */ - } - /* end copybreak code */ - skb_put(skb, length); - - /* Receive Checksum Offload */ - e1000_rx_checksum(adapter, - (u32)(status) | - ((u32)(rx_desc->errors) << 24), - le16_to_cpu(rx_desc->csum), skb); - - e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special); - -next_desc: - rx_desc->status = 0; - - /* return some buffers to hardware, one at a time is too slow */ - if (cleaned_count >= E1000_RX_BUFFER_WRITE) { - adapter->alloc_rx_buf(adapter, cleaned_count); - cleaned_count = 0; - } - - /* use prefetched values */ - rx_desc = next_rxd; - buffer_info = next_buffer; - } - rx_ring->next_to_clean = i; - - cleaned_count = e1000_desc_unused(rx_ring); - if (cleaned_count) - adapter->alloc_rx_buf(adapter, cleaned_count); - - adapter->total_rx_packets += total_rx_packets; - adapter->total_rx_bytes += total_rx_bytes; - adapter->net_stats.rx_packets += total_rx_packets; - adapter->net_stats.rx_bytes += total_rx_bytes; - return cleaned; -} - -static void e1000_put_txbuf(struct e1000_adapter *adapter, - struct e1000_buffer *buffer_info) -{ - if (buffer_info->dma) { - pci_unmap_page(adapter->pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_TODEVICE); - buffer_info->dma = 0; - } - if (buffer_info->skb) { - dev_kfree_skb_any(buffer_info->skb); - buffer_info->skb = NULL; - } -} - -static void e1000_print_tx_hang(struct e1000_adapter *adapter) -{ - struct e1000_ring *tx_ring = adapter->tx_ring; - unsigned int i = tx_ring->next_to_clean; - unsigned int eop = tx_ring->buffer_info[i].next_to_watch; - struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); - struct net_device *netdev = adapter->netdev; - - /* detected Tx unit hang */ - ndev_err(netdev, - "Detected Tx Unit Hang:\n" - " TDH <%x>\n" - " TDT <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "buffer_info[next_to_clean]:\n" - " time_stamp <%lx>\n" - " next_to_watch <%x>\n" - " jiffies <%lx>\n" - " next_to_watch.status <%x>\n", - readl(adapter->hw.hw_addr + tx_ring->head), - readl(adapter->hw.hw_addr + tx_ring->tail), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_ring->buffer_info[eop].time_stamp, - eop, - jiffies, - eop_desc->upper.fields.status); -} - -/** - * e1000_clean_tx_irq - Reclaim resources after transmit completes - * @adapter: board private structure - * - * the return value indicates whether actual cleaning was done, there - * is no guarantee that everything was cleaned - **/ -static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct e1000_hw *hw = &adapter->hw; - struct e1000_ring *tx_ring = adapter->tx_ring; - struct e1000_tx_desc *tx_desc, *eop_desc; - struct e1000_buffer *buffer_info; - unsigned int i, eop; - unsigned int count = 0; - bool cleaned = 0; - unsigned int total_tx_bytes = 0, total_tx_packets = 0; - - i = tx_ring->next_to_clean; - eop = tx_ring->buffer_info[i].next_to_watch; - eop_desc = E1000_TX_DESC(*tx_ring, eop); - - while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - for (cleaned = 0; !cleaned; ) { - tx_desc = E1000_TX_DESC(*tx_ring, i); - buffer_info = &tx_ring->buffer_info[i]; - cleaned = (i == eop); - - if (cleaned) { - struct sk_buff *skb = buffer_info->skb; - unsigned int segs, bytecount; - segs = skb_shinfo(skb)->gso_segs ?: 1; - /* multiply data chunks by size of headers */ - bytecount = ((segs - 1) * skb_headlen(skb)) + - skb->len; - total_tx_packets += segs; - total_tx_bytes += bytecount; - } - - e1000_put_txbuf(adapter, buffer_info); - tx_desc->upper.data = 0; - - i++; - if (i == tx_ring->count) - i = 0; - } - - eop = tx_ring->buffer_info[i].next_to_watch; - eop_desc = E1000_TX_DESC(*tx_ring, eop); -#define E1000_TX_WEIGHT 64 - /* weight of a sort for tx, to avoid endless transmit cleanup */ - if (count++ == E1000_TX_WEIGHT) - break; - } - - tx_ring->next_to_clean = i; - -#define TX_WAKE_THRESHOLD 32 - if (cleaned && netif_carrier_ok(netdev) && - e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { - /* Make sure that anybody stopping the queue after this - * sees the new next_to_clean. - */ - smp_mb(); - - if (netif_queue_stopped(netdev) && - !(test_bit(__E1000_DOWN, &adapter->state))) { - netif_wake_queue(netdev); - ++adapter->restart_queue; - } - } - - if (adapter->detect_tx_hung) { - /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ - adapter->detect_tx_hung = 0; - if (tx_ring->buffer_info[eop].dma && - time_after(jiffies, tx_ring->buffer_info[eop].time_stamp - + (adapter->tx_timeout_factor * HZ)) - && !(er32(STATUS) & - E1000_STATUS_TXOFF)) { - e1000_print_tx_hang(adapter); - netif_stop_queue(netdev); - } - } - adapter->total_tx_bytes += total_tx_bytes; - adapter->total_tx_packets += total_tx_packets; - adapter->net_stats.tx_packets += total_tx_packets; - adapter->net_stats.tx_bytes += total_tx_bytes; - return cleaned; -} - -/** - * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split - * @adapter: board private structure - * - * the return value indicates whether actual cleaning was done, there - * is no guarantee that everything was cleaned - **/ -static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, - int *work_done, int work_to_do) -{ - union e1000_rx_desc_packet_split *rx_desc, *next_rxd; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *rx_ring = adapter->rx_ring; - struct e1000_buffer *buffer_info, *next_buffer; - struct e1000_ps_page *ps_page; - struct sk_buff *skb; - unsigned int i, j; - u32 length, staterr; - int cleaned_count = 0; - bool cleaned = 0; - unsigned int total_rx_bytes = 0, total_rx_packets = 0; - - i = rx_ring->next_to_clean; - rx_desc = E1000_RX_DESC_PS(*rx_ring, i); - staterr = le32_to_cpu(rx_desc->wb.middle.status_error); - buffer_info = &rx_ring->buffer_info[i]; - - while (staterr & E1000_RXD_STAT_DD) { - if (*work_done >= work_to_do) - break; - (*work_done)++; - skb = buffer_info->skb; - - /* in the packet split case this is header only */ - prefetch(skb->data - NET_IP_ALIGN); - - i++; - if (i == rx_ring->count) - i = 0; - next_rxd = E1000_RX_DESC_PS(*rx_ring, i); - prefetch(next_rxd); - - next_buffer = &rx_ring->buffer_info[i]; - - cleaned = 1; - cleaned_count++; - pci_unmap_single(pdev, buffer_info->dma, - adapter->rx_ps_bsize0, - PCI_DMA_FROMDEVICE); - buffer_info->dma = 0; - - if (!(staterr & E1000_RXD_STAT_EOP)) { - ndev_dbg(netdev, "%s: Packet Split buffers didn't pick " - "up the full packet\n", netdev->name); - dev_kfree_skb_irq(skb); - goto next_desc; - } - - if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { - dev_kfree_skb_irq(skb); - goto next_desc; - } - - length = le16_to_cpu(rx_desc->wb.middle.length0); - - if (!length) { - ndev_dbg(netdev, "%s: Last part of the packet spanning" - " multiple descriptors\n", netdev->name); - dev_kfree_skb_irq(skb); - goto next_desc; - } - - /* Good Receive */ - skb_put(skb, length); - - { - /* this looks ugly, but it seems compiler issues make it - more efficient than reusing j */ - int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); - - /* page alloc/put takes too long and effects small packet - * throughput, so unsplit small packets and save the alloc/put*/ - if (l1 && (l1 <= copybreak) && - ((length + l1) <= adapter->rx_ps_bsize0)) { - u8 *vaddr; - - ps_page = &buffer_info->ps_pages[0]; - - /* there is no documentation about how to call - * kmap_atomic, so we can't hold the mapping - * very long */ - pci_dma_sync_single_for_cpu(pdev, ps_page->dma, - PAGE_SIZE, PCI_DMA_FROMDEVICE); - vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ); - memcpy(skb_tail_pointer(skb), vaddr, l1); - kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ); - pci_dma_sync_single_for_device(pdev, ps_page->dma, - PAGE_SIZE, PCI_DMA_FROMDEVICE); - - skb_put(skb, l1); - goto copydone; - } /* if */ - } - - for (j = 0; j < PS_PAGE_BUFFERS; j++) { - length = le16_to_cpu(rx_desc->wb.upper.length[j]); - if (!length) - break; - - ps_page = &buffer_info->ps_pages[j]; - pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE, - PCI_DMA_FROMDEVICE); - ps_page->dma = 0; - skb_fill_page_desc(skb, j, ps_page->page, 0, length); - ps_page->page = NULL; - skb->len += length; - skb->data_len += length; - skb->truesize += length; - } - -copydone: - total_rx_bytes += skb->len; - total_rx_packets++; - - e1000_rx_checksum(adapter, staterr, le16_to_cpu( - rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); - - if (rx_desc->wb.upper.header_status & - cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) - adapter->rx_hdr_split++; - - e1000_receive_skb(adapter, netdev, skb, - staterr, rx_desc->wb.middle.vlan); - -next_desc: - rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); - buffer_info->skb = NULL; - - /* return some buffers to hardware, one at a time is too slow */ - if (cleaned_count >= E1000_RX_BUFFER_WRITE) { - adapter->alloc_rx_buf(adapter, cleaned_count); - cleaned_count = 0; - } - - /* use prefetched values */ - rx_desc = next_rxd; - buffer_info = next_buffer; - - staterr = le32_to_cpu(rx_desc->wb.middle.status_error); - } - rx_ring->next_to_clean = i; - - cleaned_count = e1000_desc_unused(rx_ring); - if (cleaned_count) - adapter->alloc_rx_buf(adapter, cleaned_count); - - adapter->total_rx_packets += total_rx_packets; - adapter->total_rx_bytes += total_rx_bytes; - adapter->net_stats.rx_packets += total_rx_packets; - adapter->net_stats.rx_bytes += total_rx_bytes; - return cleaned; -} - -/** - * e1000_clean_rx_ring - Free Rx Buffers per Queue - * @adapter: board private structure - **/ -static void e1000_clean_rx_ring(struct e1000_adapter *adapter) -{ - struct e1000_ring *rx_ring = adapter->rx_ring; - struct e1000_buffer *buffer_info; - struct e1000_ps_page *ps_page; - struct pci_dev *pdev = adapter->pdev; - unsigned int i, j; - - /* Free all the Rx ring sk_buffs */ - for (i = 0; i < rx_ring->count; i++) { - buffer_info = &rx_ring->buffer_info[i]; - if (buffer_info->dma) { - if (adapter->clean_rx == e1000_clean_rx_irq) - pci_unmap_single(pdev, buffer_info->dma, - adapter->rx_buffer_len, - PCI_DMA_FROMDEVICE); - else if (adapter->clean_rx == e1000_clean_rx_irq_ps) - pci_unmap_single(pdev, buffer_info->dma, - adapter->rx_ps_bsize0, - PCI_DMA_FROMDEVICE); - buffer_info->dma = 0; - } - - if (buffer_info->skb) { - dev_kfree_skb(buffer_info->skb); - buffer_info->skb = NULL; - } - - for (j = 0; j < PS_PAGE_BUFFERS; j++) { - ps_page = &buffer_info->ps_pages[j]; - if (!ps_page->page) - break; - pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE, - PCI_DMA_FROMDEVICE); - ps_page->dma = 0; - put_page(ps_page->page); - ps_page->page = NULL; - } - } - - /* there also may be some cached data from a chained receive */ - if (rx_ring->rx_skb_top) { - dev_kfree_skb(rx_ring->rx_skb_top); - rx_ring->rx_skb_top = NULL; - } - - /* Zero out the descriptor ring */ - memset(rx_ring->desc, 0, rx_ring->size); - - rx_ring->next_to_clean = 0; - rx_ring->next_to_use = 0; - - writel(0, adapter->hw.hw_addr + rx_ring->head); - writel(0, adapter->hw.hw_addr + rx_ring->tail); -} - -/** - * e1000_intr_msi - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ -static irqreturn_t e1000_intr_msi(int irq, void *data) -{ - struct net_device *netdev = data; - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 icr = er32(ICR); - - /* read ICR disables interrupts using IAM, so keep up with our - * enable/disable accounting */ - atomic_inc(&adapter->irq_sem); - - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { - hw->mac.get_link_status = 1; - /* ICH8 workaround-- Call gig speed drop workaround on cable - * disconnect (LSC) before accessing any PHY registers */ - if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && - (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); - - /* 80003ES2LAN workaround-- For packet buffer work-around on - * link down event; disable receives here in the ISR and reset - * adapter in watchdog */ - if (netif_carrier_ok(netdev) && - adapter->flags & FLAG_RX_NEEDS_RESTART) { - /* disable receives */ - u32 rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); - } - /* guard against interrupt when we're going down */ - if (!test_bit(__E1000_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - - if (netif_rx_schedule_prep(netdev, &adapter->napi)) { - adapter->total_tx_bytes = 0; - adapter->total_tx_packets = 0; - adapter->total_rx_bytes = 0; - adapter->total_rx_packets = 0; - __netif_rx_schedule(netdev, &adapter->napi); - } else { - atomic_dec(&adapter->irq_sem); - } - - return IRQ_HANDLED; -} - -/** - * e1000_intr - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ -static irqreturn_t e1000_intr(int irq, void *data) -{ - struct net_device *netdev = data; - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - u32 rctl, icr = er32(ICR); - if (!icr) - return IRQ_NONE; /* Not our interrupt */ - - /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is - * not set, then the adapter didn't send an interrupt */ - if (!(icr & E1000_ICR_INT_ASSERTED)) - return IRQ_NONE; - - /* Interrupt Auto-Mask...upon reading ICR, - * interrupts are masked. No need for the - * IMC write, but it does mean we should - * account for it ASAP. */ - atomic_inc(&adapter->irq_sem); - - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { - hw->mac.get_link_status = 1; - /* ICH8 workaround-- Call gig speed drop workaround on cable - * disconnect (LSC) before accessing any PHY registers */ - if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && - (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); - - /* 80003ES2LAN workaround-- - * For packet buffer work-around on link down event; - * disable receives here in the ISR and - * reset adapter in watchdog - */ - if (netif_carrier_ok(netdev) && - (adapter->flags & FLAG_RX_NEEDS_RESTART)) { - /* disable receives */ - rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); - } - /* guard against interrupt when we're going down */ - if (!test_bit(__E1000_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - - if (netif_rx_schedule_prep(netdev, &adapter->napi)) { - adapter->total_tx_bytes = 0; - adapter->total_tx_packets = 0; - adapter->total_rx_bytes = 0; - adapter->total_rx_packets = 0; - __netif_rx_schedule(netdev, &adapter->napi); - } else { - atomic_dec(&adapter->irq_sem); - } - - return IRQ_HANDLED; -} - -static int e1000_request_irq(struct e1000_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - irq_handler_t handler = e1000_intr; - int irq_flags = IRQF_SHARED; - int err; - - if (!pci_enable_msi(adapter->pdev)) { - adapter->flags |= FLAG_MSI_ENABLED; - handler = e1000_intr_msi; - irq_flags = 0; - } - - err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, - netdev); - if (err) { - ndev_err(netdev, - "Unable to allocate %s interrupt (return: %d)\n", - adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", - err); - if (adapter->flags & FLAG_MSI_ENABLED) - pci_disable_msi(adapter->pdev); - } - - return err; -} - -static void e1000_free_irq(struct e1000_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - - free_irq(adapter->pdev->irq, netdev); - if (adapter->flags & FLAG_MSI_ENABLED) { - pci_disable_msi(adapter->pdev); - adapter->flags &= ~FLAG_MSI_ENABLED; - } -} - -/** - * e1000_irq_disable - Mask off interrupt generation on the NIC - **/ -static void e1000_irq_disable(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - atomic_inc(&adapter->irq_sem); - ew32(IMC, ~0); - e1e_flush(); - synchronize_irq(adapter->pdev->irq); -} - -/** - * e1000_irq_enable - Enable default interrupt generation settings - **/ -static void e1000_irq_enable(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - if (atomic_dec_and_test(&adapter->irq_sem)) { - ew32(IMS, IMS_ENABLE_MASK); - e1e_flush(); - } -} - -/** - * e1000_get_hw_control - get control of the h/w from f/w - * @adapter: address of board private structure - * - * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that - * the driver is loaded. For AMT version (only with 82573) - * of the f/w this means that the network i/f is open. - **/ -static void e1000_get_hw_control(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_ext; - u32 swsm; - - /* Let firmware know the driver has taken over */ - if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { - swsm = er32(SWSM); - ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD); - } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { - ctrl_ext = er32(CTRL_EXT); - ew32(CTRL_EXT, - ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); - } -} - -/** - * e1000_release_hw_control - release control of the h/w to f/w - * @adapter: address of board private structure - * - * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that the - * driver is no longer loaded. For AMT version (only with 82573) i - * of the f/w this means that the network i/f is closed. - * - **/ -static void e1000_release_hw_control(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_ext; - u32 swsm; - - /* Let firmware taken over control of h/w */ - if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { - swsm = er32(SWSM); - ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD); - } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { - ctrl_ext = er32(CTRL_EXT); - ew32(CTRL_EXT, - ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); - } -} - -/** - * @e1000_alloc_ring - allocate memory for a ring structure - **/ -static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, - struct e1000_ring *ring) -{ - struct pci_dev *pdev = adapter->pdev; - - ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma, - GFP_KERNEL); - if (!ring->desc) - return -ENOMEM; - - return 0; -} - -/** - * e1000e_setup_tx_resources - allocate Tx resources (Descriptors) - * @adapter: board private structure - * - * Return 0 on success, negative on failure - **/ -int e1000e_setup_tx_resources(struct e1000_adapter *adapter) -{ - struct e1000_ring *tx_ring = adapter->tx_ring; - int err = -ENOMEM, size; - - size = sizeof(struct e1000_buffer) * tx_ring->count; - tx_ring->buffer_info = vmalloc(size); - if (!tx_ring->buffer_info) - goto err; - memset(tx_ring->buffer_info, 0, size); - - /* round up to nearest 4K */ - tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); - tx_ring->size = ALIGN(tx_ring->size, 4096); - - err = e1000_alloc_ring_dma(adapter, tx_ring); - if (err) - goto err; - - tx_ring->next_to_use = 0; - tx_ring->next_to_clean = 0; - spin_lock_init(&adapter->tx_queue_lock); - - return 0; -err: - vfree(tx_ring->buffer_info); - ndev_err(adapter->netdev, - "Unable to allocate memory for the transmit descriptor ring\n"); - return err; -} - -/** - * e1000e_setup_rx_resources - allocate Rx resources (Descriptors) - * @adapter: board private structure - * - * Returns 0 on success, negative on failure - **/ -int e1000e_setup_rx_resources(struct e1000_adapter *adapter) -{ - struct e1000_ring *rx_ring = adapter->rx_ring; - struct e1000_buffer *buffer_info; - int i, size, desc_len, err = -ENOMEM; - - size = sizeof(struct e1000_buffer) * rx_ring->count; - rx_ring->buffer_info = vmalloc(size); - if (!rx_ring->buffer_info) - goto err; - memset(rx_ring->buffer_info, 0, size); - - for (i = 0; i < rx_ring->count; i++) { - buffer_info = &rx_ring->buffer_info[i]; - buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS, - sizeof(struct e1000_ps_page), - GFP_KERNEL); - if (!buffer_info->ps_pages) - goto err_pages; - } - - desc_len = sizeof(union e1000_rx_desc_packet_split); - - /* Round up to nearest 4K */ - rx_ring->size = rx_ring->count * desc_len; - rx_ring->size = ALIGN(rx_ring->size, 4096); - - err = e1000_alloc_ring_dma(adapter, rx_ring); - if (err) - goto err_pages; - - rx_ring->next_to_clean = 0; - rx_ring->next_to_use = 0; - rx_ring->rx_skb_top = NULL; - - return 0; - -err_pages: - for (i = 0; i < rx_ring->count; i++) { - buffer_info = &rx_ring->buffer_info[i]; - kfree(buffer_info->ps_pages); - } -err: - vfree(rx_ring->buffer_info); - ndev_err(adapter->netdev, - "Unable to allocate memory for the transmit descriptor ring\n"); - return err; -} - -/** - * e1000_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure - **/ -static void e1000_clean_tx_ring(struct e1000_adapter *adapter) -{ - struct e1000_ring *tx_ring = adapter->tx_ring; - struct e1000_buffer *buffer_info; - unsigned long size; - unsigned int i; - - for (i = 0; i < tx_ring->count; i++) { - buffer_info = &tx_ring->buffer_info[i]; - e1000_put_txbuf(adapter, buffer_info); - } - - size = sizeof(struct e1000_buffer) * tx_ring->count; - memset(tx_ring->buffer_info, 0, size); - - memset(tx_ring->desc, 0, tx_ring->size); - - tx_ring->next_to_use = 0; - tx_ring->next_to_clean = 0; - - writel(0, adapter->hw.hw_addr + tx_ring->head); - writel(0, adapter->hw.hw_addr + tx_ring->tail); -} - -/** - * e1000e_free_tx_resources - Free Tx Resources per Queue - * @adapter: board private structure - * - * Free all transmit software resources - **/ -void e1000e_free_tx_resources(struct e1000_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *tx_ring = adapter->tx_ring; - - e1000_clean_tx_ring(adapter); - - vfree(tx_ring->buffer_info); - tx_ring->buffer_info = NULL; - - dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, - tx_ring->dma); - tx_ring->desc = NULL; -} - -/** - * e1000e_free_rx_resources - Free Rx Resources - * @adapter: board private structure - * - * Free all receive software resources - **/ - -void e1000e_free_rx_resources(struct e1000_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct e1000_ring *rx_ring = adapter->rx_ring; - int i; - - e1000_clean_rx_ring(adapter); - - for (i = 0; i < rx_ring->count; i++) { - kfree(rx_ring->buffer_info[i].ps_pages); - } - - vfree(rx_ring->buffer_info); - rx_ring->buffer_info = NULL; - - dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, - rx_ring->dma); - rx_ring->desc = NULL; -} - -/** - * e1000_update_itr - update the dynamic ITR value based on statistics - * @adapter: pointer to adapter - * @itr_setting: current adapter->itr - * @packets: the number of packets during this measurement interval - * @bytes: the number of bytes during this measurement interval - * - * Stores a new ITR value based on packets and byte - * counts during the last interrupt. The advantage of per interrupt - * computation is faster updates and more accurate ITR for the current - * traffic pattern. Constants in this function were computed - * based on theoretical maximum wire speed and thresholds were set based - * on testing data as well as attempting to minimize response time - * while increasing bulk throughput. - * this functionality is controlled by the InterruptThrottleRate module - * parameter (see e1000_param.c) - **/ -static unsigned int e1000_update_itr(struct e1000_adapter *adapter, - u16 itr_setting, int packets, - int bytes) -{ - unsigned int retval = itr_setting; - - if (packets == 0) - goto update_itr_done; - - switch (itr_setting) { - case lowest_latency: - /* handle TSO and jumbo frames */ - if (bytes/packets > 8000) - retval = bulk_latency; - else if ((packets < 5) && (bytes > 512)) { - retval = low_latency; - } - break; - case low_latency: /* 50 usec aka 20000 ints/s */ - if (bytes > 10000) { - /* this if handles the TSO accounting */ - if (bytes/packets > 8000) { - retval = bulk_latency; - } else if ((packets < 10) || ((bytes/packets) > 1200)) { - retval = bulk_latency; - } else if ((packets > 35)) { - retval = lowest_latency; - } - } else if (bytes/packets > 2000) { - retval = bulk_latency; - } else if (packets <= 2 && bytes < 512) { - retval = lowest_latency; - } - break; - case bulk_latency: /* 250 usec aka 4000 ints/s */ - if (bytes > 25000) { - if (packets > 35) { - retval = low_latency; - } - } else if (bytes < 6000) { - retval = low_latency; - } - break; - } - -update_itr_done: - return retval; -} - -static void e1000_set_itr(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u16 current_itr; - u32 new_itr = adapter->itr; - - /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ - if (adapter->link_speed != SPEED_1000) { - current_itr = 0; - new_itr = 4000; - goto set_itr_now; - } - - adapter->tx_itr = e1000_update_itr(adapter, - adapter->tx_itr, - adapter->total_tx_packets, - adapter->total_tx_bytes); - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) - adapter->tx_itr = low_latency; - - adapter->rx_itr = e1000_update_itr(adapter, - adapter->rx_itr, - adapter->total_rx_packets, - adapter->total_rx_bytes); - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) - adapter->rx_itr = low_latency; - - current_itr = max(adapter->rx_itr, adapter->tx_itr); - - switch (current_itr) { - /* counts and packets in update_itr are dependent on these numbers */ - case lowest_latency: - new_itr = 70000; - break; - case low_latency: - new_itr = 20000; /* aka hwitr = ~200 */ - break; - case bulk_latency: - new_itr = 4000; - break; - default: - break; - } - -set_itr_now: - if (new_itr != adapter->itr) { - /* this attempts to bias the interrupt rate towards Bulk - * by adding intermediate steps when interrupt rate is - * increasing */ - new_itr = new_itr > adapter->itr ? - min(adapter->itr + (new_itr >> 2), new_itr) : - new_itr; - adapter->itr = new_itr; - ew32(ITR, 1000000000 / (new_itr * 256)); - } -} - -/** - * e1000_clean - NAPI Rx polling callback - * @adapter: board private structure - * @budget: amount of packets driver is allowed to process this poll - **/ -static int e1000_clean(struct napi_struct *napi, int budget) -{ - struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); - struct net_device *poll_dev = adapter->netdev; - int tx_cleaned = 0, work_done = 0; - - /* Must NOT use netdev_priv macro here. */ - adapter = poll_dev->priv; - - /* e1000_clean is called per-cpu. This lock protects - * tx_ring from being cleaned by multiple cpus - * simultaneously. A failure obtaining the lock means - * tx_ring is currently being cleaned anyway. */ - if (spin_trylock(&adapter->tx_queue_lock)) { - tx_cleaned = e1000_clean_tx_irq(adapter); - spin_unlock(&adapter->tx_queue_lock); - } - - adapter->clean_rx(adapter, &work_done, budget); - - if (tx_cleaned) - work_done = budget; - - /* If budget not fully consumed, exit the polling mode */ - if (work_done < budget) { - if (adapter->itr_setting & 3) - e1000_set_itr(adapter); - netif_rx_complete(poll_dev, napi); - e1000_irq_enable(adapter); - } - - return work_done; -} - -static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 vfta, index; - - /* don't update vlan cookie if already programmed */ - if ((adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && - (vid == adapter->mng_vlan_id)) - return; - /* add VID to filter table */ - index = (vid >> 5) & 0x7F; - vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); - vfta |= (1 << (vid & 0x1F)); - e1000e_write_vfta(hw, index, vfta); -} - -static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 vfta, index; - - e1000_irq_disable(adapter); - vlan_group_set_device(adapter->vlgrp, vid, NULL); - e1000_irq_enable(adapter); - - if ((adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && - (vid == adapter->mng_vlan_id)) { - /* release control to f/w */ - e1000_release_hw_control(adapter); - return; - } - - /* remove VID from filter table */ - index = (vid >> 5) & 0x7F; - vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); - vfta &= ~(1 << (vid & 0x1F)); - e1000e_write_vfta(hw, index, vfta); -} - -static void e1000_update_mng_vlan(struct e1000_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - u16 vid = adapter->hw.mng_cookie.vlan_id; - u16 old_vid = adapter->mng_vlan_id; - - if (!adapter->vlgrp) - return; - - if (!vlan_group_get_device(adapter->vlgrp, vid)) { - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - if (adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { - e1000_vlan_rx_add_vid(netdev, vid); - adapter->mng_vlan_id = vid; - } - - if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && - (vid != old_vid) && - !vlan_group_get_device(adapter->vlgrp, old_vid)) - e1000_vlan_rx_kill_vid(netdev, old_vid); - } else { - adapter->mng_vlan_id = vid; - } -} - - -static void e1000_vlan_rx_register(struct net_device *netdev, - struct vlan_group *grp) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl, rctl; - - e1000_irq_disable(adapter); - adapter->vlgrp = grp; - - if (grp) { - /* enable VLAN tag insert/strip */ - ctrl = er32(CTRL); - ctrl |= E1000_CTRL_VME; - ew32(CTRL, ctrl); - - if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { - /* enable VLAN receive filtering */ - rctl = er32(RCTL); - rctl |= E1000_RCTL_VFE; - rctl &= ~E1000_RCTL_CFIEN; - ew32(RCTL, rctl); - e1000_update_mng_vlan(adapter); - } - } else { - /* disable VLAN tag insert/strip */ - ctrl = er32(CTRL); - ctrl &= ~E1000_CTRL_VME; - ew32(CTRL, ctrl); - - if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { - /* disable VLAN filtering */ - rctl = er32(RCTL); - rctl &= ~E1000_RCTL_VFE; - ew32(RCTL, rctl); - if (adapter->mng_vlan_id != - (u16)E1000_MNG_VLAN_NONE) { - e1000_vlan_rx_kill_vid(netdev, - adapter->mng_vlan_id); - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - } - } - } - - e1000_irq_enable(adapter); -} - -static void e1000_restore_vlan(struct e1000_adapter *adapter) -{ - u16 vid; - - e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp); - - if (!adapter->vlgrp) - return; - - for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { - if (!vlan_group_get_device(adapter->vlgrp, vid)) - continue; - e1000_vlan_rx_add_vid(adapter->netdev, vid); - } -} - -static void e1000_init_manageability(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 manc, manc2h; - - if (!(adapter->flags & FLAG_MNG_PT_ENABLED)) - return; - - manc = er32(MANC); - - /* enable receiving management packets to the host. this will probably - * generate destination unreachable messages from the host OS, but - * the packets will be handled on SMBUS */ - manc |= E1000_MANC_EN_MNG2HOST; - manc2h = er32(MANC2H); -#define E1000_MNG2HOST_PORT_623 (1 << 5) -#define E1000_MNG2HOST_PORT_664 (1 << 6) - manc2h |= E1000_MNG2HOST_PORT_623; - manc2h |= E1000_MNG2HOST_PORT_664; - ew32(MANC2H, manc2h); - ew32(MANC, manc); -} - -/** - * e1000_configure_tx - Configure 8254x Transmit Unit after Reset - * @adapter: board private structure - * - * Configure the Tx unit of the MAC after a reset. - **/ -static void e1000_configure_tx(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct e1000_ring *tx_ring = adapter->tx_ring; - u64 tdba; - u32 tdlen, tctl, tipg, tarc; - u32 ipgr1, ipgr2; - - /* Setup the HW Tx Head and Tail descriptor pointers */ - tdba = tx_ring->dma; - tdlen = tx_ring->count * sizeof(struct e1000_tx_desc); - ew32(TDBAL, (tdba & DMA_32BIT_MASK)); - ew32(TDBAH, (tdba >> 32)); - ew32(TDLEN, tdlen); - ew32(TDH, 0); - ew32(TDT, 0); - tx_ring->head = E1000_TDH; - tx_ring->tail = E1000_TDT; - - /* Set the default values for the Tx Inter Packet Gap timer */ - tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */ - ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */ - ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */ - - if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN) - ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */ - - tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT; - tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT; - ew32(TIPG, tipg); - - /* Set the Tx Interrupt Delay register */ - ew32(TIDV, adapter->tx_int_delay); - /* tx irq moderation */ - ew32(TADV, adapter->tx_abs_int_delay); - - /* Program the Transmit Control Register */ - tctl = er32(TCTL); - tctl &= ~E1000_TCTL_CT; - tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | - (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); - - if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { - tarc = er32(TARC0); - /* set the speed mode bit, we'll clear it if we're not at - * gigabit link later */ -#define SPEED_MODE_BIT (1 << 21) - tarc |= SPEED_MODE_BIT; - ew32(TARC0, tarc); - } - - /* errata: program both queues to unweighted RR */ - if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) { - tarc = er32(TARC0); - tarc |= 1; - ew32(TARC0, tarc); - tarc = er32(TARC1); - tarc |= 1; - ew32(TARC1, tarc); - } - - e1000e_config_collision_dist(hw); - - /* Setup Transmit Descriptor Settings for eop descriptor */ - adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; - - /* only set IDE if we are delaying interrupts using the timers */ - if (adapter->tx_int_delay) - adapter->txd_cmd |= E1000_TXD_CMD_IDE; - - /* enable Report Status bit */ - adapter->txd_cmd |= E1000_TXD_CMD_RS; - - ew32(TCTL, tctl); - - adapter->tx_queue_len = adapter->netdev->tx_queue_len; -} - -/** - * e1000_setup_rctl - configure the receive control registers - * @adapter: Board private structure - **/ -#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ - (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) -static void e1000_setup_rctl(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 rctl, rfctl; - u32 psrctl = 0; - u32 pages = 0; - - /* Program MC offset vector base */ - rctl = er32(RCTL); - rctl &= ~(3 << E1000_RCTL_MO_SHIFT); - rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | - E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | - (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); - - /* Do not Store bad packets */ - rctl &= ~E1000_RCTL_SBP; - - /* Enable Long Packet receive */ - if (adapter->netdev->mtu <= ETH_DATA_LEN) - rctl &= ~E1000_RCTL_LPE; - else - rctl |= E1000_RCTL_LPE; - - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; - - /* Setup buffer sizes */ - rctl &= ~E1000_RCTL_SZ_4096; - rctl |= E1000_RCTL_BSEX; - switch (adapter->rx_buffer_len) { - case 256: - rctl |= E1000_RCTL_SZ_256; - rctl &= ~E1000_RCTL_BSEX; - break; - case 512: - rctl |= E1000_RCTL_SZ_512; - rctl &= ~E1000_RCTL_BSEX; - break; - case 1024: - rctl |= E1000_RCTL_SZ_1024; - rctl &= ~E1000_RCTL_BSEX; - break; - case 2048: - default: - rctl |= E1000_RCTL_SZ_2048; - rctl &= ~E1000_RCTL_BSEX; - break; - case 4096: - rctl |= E1000_RCTL_SZ_4096; - break; - case 8192: - rctl |= E1000_RCTL_SZ_8192; - break; - case 16384: - rctl |= E1000_RCTL_SZ_16384; - break; - } - - /* - * 82571 and greater support packet-split where the protocol - * header is placed in skb->data and the packet data is - * placed in pages hanging off of skb_shinfo(skb)->nr_frags. - * In the case of a non-split, skb->data is linearly filled, - * followed by the page buffers. Therefore, skb->data is - * sized to hold the largest protocol header. - * - * allocations using alloc_page take too long for regular MTU - * so only enable packet split for jumbo frames - * - * Using pages when the page size is greater than 16k wastes - * a lot of memory, since we allocate 3 pages at all times - * per packet. - */ - adapter->rx_ps_pages = 0; - pages = PAGE_USE_COUNT(adapter->netdev->mtu); - if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE)) - adapter->rx_ps_pages = pages; - - if (adapter->rx_ps_pages) { - /* Configure extra packet-split registers */ - rfctl = er32(RFCTL); - rfctl |= E1000_RFCTL_EXTEN; - /* disable packet split support for IPv6 extension headers, - * because some malformed IPv6 headers can hang the RX */ - rfctl |= (E1000_RFCTL_IPV6_EX_DIS | - E1000_RFCTL_NEW_IPV6_EXT_DIS); - - ew32(RFCTL, rfctl); - - /* Enable Packet split descriptors */ - rctl |= E1000_RCTL_DTYP_PS; - - psrctl |= adapter->rx_ps_bsize0 >> - E1000_PSRCTL_BSIZE0_SHIFT; - - switch (adapter->rx_ps_pages) { - case 3: - psrctl |= PAGE_SIZE << - E1000_PSRCTL_BSIZE3_SHIFT; - case 2: - psrctl |= PAGE_SIZE << - E1000_PSRCTL_BSIZE2_SHIFT; - case 1: - psrctl |= PAGE_SIZE >> - E1000_PSRCTL_BSIZE1_SHIFT; - break; - } - - ew32(PSRCTL, psrctl); - } - - ew32(RCTL, rctl); -} - -/** - * e1000_configure_rx - Configure Receive Unit after Reset - * @adapter: board private structure - * - * Configure the Rx unit of the MAC after a reset. - **/ -static void e1000_configure_rx(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct e1000_ring *rx_ring = adapter->rx_ring; - u64 rdba; - u32 rdlen, rctl, rxcsum, ctrl_ext; - - if (adapter->rx_ps_pages) { - /* this is a 32 byte descriptor */ - rdlen = rx_ring->count * - sizeof(union e1000_rx_desc_packet_split); - adapter->clean_rx = e1000_clean_rx_irq_ps; - adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; - } else { - rdlen = rx_ring->count * - sizeof(struct e1000_rx_desc); - adapter->clean_rx = e1000_clean_rx_irq; - adapter->alloc_rx_buf = e1000_alloc_rx_buffers; - } - - /* disable receives while setting up the descriptors */ - rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); - e1e_flush(); - msleep(10); - - /* set the Receive Delay Timer Register */ - ew32(RDTR, adapter->rx_int_delay); - - /* irq moderation */ - ew32(RADV, adapter->rx_abs_int_delay); - if (adapter->itr_setting != 0) - ew32(ITR, - 1000000000 / (adapter->itr * 256)); - - ctrl_ext = er32(CTRL_EXT); - /* Reset delay timers after every interrupt */ - ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; - /* Auto-Mask interrupts upon ICR access */ - ctrl_ext |= E1000_CTRL_EXT_IAME; - ew32(IAM, 0xffffffff); - ew32(CTRL_EXT, ctrl_ext); - e1e_flush(); - - /* Setup the HW Rx Head and Tail Descriptor Pointers and - * the Base and Length of the Rx Descriptor Ring */ - rdba = rx_ring->dma; - ew32(RDBAL, (rdba & DMA_32BIT_MASK)); - ew32(RDBAH, (rdba >> 32)); - ew32(RDLEN, rdlen); - ew32(RDH, 0); - ew32(RDT, 0); - rx_ring->head = E1000_RDH; - rx_ring->tail = E1000_RDT; - - /* Enable Receive Checksum Offload for TCP and UDP */ - rxcsum = er32(RXCSUM); - if (adapter->flags & FLAG_RX_CSUM_ENABLED) { - rxcsum |= E1000_RXCSUM_TUOFL; - - /* IPv4 payload checksum for UDP fragments must be - * used in conjunction with packet-split. */ - if (adapter->rx_ps_pages) - rxcsum |= E1000_RXCSUM_IPPCSE; - } else { - rxcsum &= ~E1000_RXCSUM_TUOFL; - /* no need to clear IPPCSE as it defaults to 0 */ - } - ew32(RXCSUM, rxcsum); - - /* Enable early receives on supported devices, only takes effect when - * packet size is equal or larger than the specified value (in 8 byte - * units), e.g. using jumbo frames when setting to E1000_ERT_2048 */ - if ((adapter->flags & FLAG_HAS_ERT) && - (adapter->netdev->mtu > ETH_DATA_LEN)) - ew32(ERT, E1000_ERT_2048); - - /* Enable Receives */ - ew32(RCTL, rctl); -} - -/** - * e1000_mc_addr_list_update - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * @rar_used_count: the first RAR register free to program - * @rar_count: total number of supported Receive Address Registers - * - * Updates the Receive Address Registers and Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. - * The parameter rar_count will usually be hw->mac.rar_entry_count - * unless there are workarounds that change this. Currently no func pointer - * exists and all implementations are handled in the generic version of this - * function. - **/ -static void e1000_mc_addr_list_update(struct e1000_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 rar_used_count, - u32 rar_count) -{ - hw->mac.ops.mc_addr_list_update(hw, mc_addr_list, mc_addr_count, - rar_used_count, rar_count); -} - -/** - * e1000_set_multi - Multicast and Promiscuous mode set - * @netdev: network interface device structure - * - * The set_multi entry point is called whenever the multicast address - * list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper multicast, - * promiscuous mode, and all-multi behavior. - **/ -static void e1000_set_multi(struct net_device *netdev) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct e1000_mac_info *mac = &hw->mac; - struct dev_mc_list *mc_ptr; - u8 *mta_list; - u32 rctl; - int i; - - /* Check for Promiscuous and All Multicast modes */ - - rctl = er32(RCTL); - - if (netdev->flags & IFF_PROMISC) { - rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); - } else if (netdev->flags & IFF_ALLMULTI) { - rctl |= E1000_RCTL_MPE; - rctl &= ~E1000_RCTL_UPE; - } else { - rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); - } - - ew32(RCTL, rctl); - - if (netdev->mc_count) { - mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC); - if (!mta_list) - return; - - /* prepare a packed array of only addresses. */ - mc_ptr = netdev->mc_list; - - for (i = 0; i < netdev->mc_count; i++) { - if (!mc_ptr) - break; - memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, - ETH_ALEN); - mc_ptr = mc_ptr->next; - } - - e1000_mc_addr_list_update(hw, mta_list, i, 1, - mac->rar_entry_count); - kfree(mta_list); - } else { - /* - * if we're called from probe, we might not have - * anything to do here, so clear out the list - */ - e1000_mc_addr_list_update(hw, NULL, 0, 1, - mac->rar_entry_count); - } -} - -/** - * e1000_configure - configure the hardware for RX and TX - * @adapter: private board structure - **/ -static void e1000_configure(struct e1000_adapter *adapter) -{ - e1000_set_multi(adapter->netdev); - - e1000_restore_vlan(adapter); - e1000_init_manageability(adapter); - - e1000_configure_tx(adapter); - e1000_setup_rctl(adapter); - e1000_configure_rx(adapter); - adapter->alloc_rx_buf(adapter, - e1000_desc_unused(adapter->rx_ring)); -} - -/** - * e1000e_power_up_phy - restore link in case the phy was powered down - * @adapter: address of board private structure - * - * The phy may be powered down to save power and turn off link when the - * driver is unloaded and wake on lan is not enabled (among others) - * *** this routine MUST be followed by a call to e1000e_reset *** - **/ -void e1000e_power_up_phy(struct e1000_adapter *adapter) -{ - u16 mii_reg = 0; - - /* Just clear the power down bit to wake the phy back up */ - if (adapter->hw.media_type == e1000_media_type_copper) { - /* according to the manual, the phy will retain its - * settings across a power-down/up cycle */ - e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg); - mii_reg &= ~MII_CR_POWER_DOWN; - e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg); - } - - adapter->hw.mac.ops.setup_link(&adapter->hw); -} - -/** - * e1000_power_down_phy - Power down the PHY - * - * Power down the PHY so no link is implied when interface is down - * The PHY cannot be powered down is management or WoL is active - */ -static void e1000_power_down_phy(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u16 mii_reg; - - /* WoL is enabled */ - if (adapter->wol) - return; - - /* non-copper PHY? */ - if (adapter->hw.media_type != e1000_media_type_copper) - return; - - /* reset is blocked because of a SoL/IDER session */ - if (e1000e_check_mng_mode(hw) || - e1000_check_reset_block(hw)) - return; - - /* manageability (AMT) is enabled */ - if (er32(MANC) & E1000_MANC_SMBUS_EN) - return; - - /* power down the PHY */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); - mdelay(1); -} - -/** - * e1000e_reset - bring the hardware into a known good state - * - * This function boots the hardware and enables some settings that - * require a configuration cycle of the hardware - those cannot be - * set/changed during runtime. After reset the device needs to be - * properly configured for rx, tx etc. - */ -void e1000e_reset(struct e1000_adapter *adapter) -{ - struct e1000_mac_info *mac = &adapter->hw.mac; - struct e1000_hw *hw = &adapter->hw; - u32 tx_space, min_tx_space, min_rx_space; - u32 pba; - u16 hwm; - - ew32(PBA, adapter->pba); - - if (mac->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) { - /* To maintain wire speed transmits, the Tx FIFO should be - * large enough to accommodate two full transmit packets, - * rounded up to the next 1KB and expressed in KB. Likewise, - * the Rx FIFO should be large enough to accommodate at least - * one full receive packet and is similarly rounded up and - * expressed in KB. */ - pba = er32(PBA); - /* upper 16 bits has Tx packet buffer allocation size in KB */ - tx_space = pba >> 16; - /* lower 16 bits has Rx packet buffer allocation size in KB */ - pba &= 0xffff; - /* the tx fifo also stores 16 bytes of information about the tx - * but don't include ethernet FCS because hardware appends it */ - min_tx_space = (mac->max_frame_size + - sizeof(struct e1000_tx_desc) - - ETH_FCS_LEN) * 2; - min_tx_space = ALIGN(min_tx_space, 1024); - min_tx_space >>= 10; - /* software strips receive CRC, so leave room for it */ - min_rx_space = mac->max_frame_size; - min_rx_space = ALIGN(min_rx_space, 1024); - min_rx_space >>= 10; - - /* If current Tx allocation is less than the min Tx FIFO size, - * and the min Tx FIFO size is less than the current Rx FIFO - * allocation, take space away from current Rx allocation */ - if ((tx_space < min_tx_space) && - ((min_tx_space - tx_space) < pba)) { - pba -= min_tx_space - tx_space; - - /* if short on rx space, rx wins and must trump tx - * adjustment or use Early Receive if available */ - if ((pba < min_rx_space) && - (!(adapter->flags & FLAG_HAS_ERT))) - /* ERT enabled in e1000_configure_rx */ - pba = min_rx_space; - } - - ew32(PBA, pba); - } - - - /* flow control settings */ - /* The high water mark must be low enough to fit one full frame - * (or the size used for early receive) above it in the Rx FIFO. - * Set it to the lower of: - * - 90% of the Rx FIFO size, and - * - the full Rx FIFO size minus the early receive size (for parts - * with ERT support assuming ERT set to E1000_ERT_2048), or - * - the full Rx FIFO size minus one full frame */ - if (adapter->flags & FLAG_HAS_ERT) - hwm = min(((adapter->pba << 10) * 9 / 10), - ((adapter->pba << 10) - (E1000_ERT_2048 << 3))); - else - hwm = min(((adapter->pba << 10) * 9 / 10), - ((adapter->pba << 10) - mac->max_frame_size)); - - mac->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */ - mac->fc_low_water = mac->fc_high_water - 8; - - if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) - mac->fc_pause_time = 0xFFFF; - else - mac->fc_pause_time = E1000_FC_PAUSE_TIME; - mac->fc = mac->original_fc; - - /* Allow time for pending master requests to run */ - mac->ops.reset_hw(hw); - ew32(WUC, 0); - - if (mac->ops.init_hw(hw)) - ndev_err(adapter->netdev, "Hardware Error\n"); - - e1000_update_mng_vlan(adapter); - - /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ - ew32(VET, ETH_P_8021Q); - - e1000e_reset_adaptive(hw); - e1000_get_phy_info(hw); - - if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) { - u16 phy_data = 0; - /* speed up time to link by disabling smart power down, ignore - * the return value of this function because there is nothing - * different we would do if it failed */ - e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); - phy_data &= ~IGP02E1000_PM_SPD; - e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); - } -} - -int e1000e_up(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - /* hardware has been reset, we need to reload some things */ - e1000_configure(adapter); - - clear_bit(__E1000_DOWN, &adapter->state); - - napi_enable(&adapter->napi); - e1000_irq_enable(adapter); - - /* fire a link change interrupt to start the watchdog */ - ew32(ICS, E1000_ICS_LSC); - return 0; -} - -void e1000e_down(struct e1000_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct e1000_hw *hw = &adapter->hw; - u32 tctl, rctl; - - /* signal that we're down so the interrupt handler does not - * reschedule our watchdog timer */ - set_bit(__E1000_DOWN, &adapter->state); - - /* disable receives in the hardware */ - rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); - /* flush and sleep below */ - - netif_stop_queue(netdev); - - /* disable transmits in the hardware */ - tctl = er32(TCTL); - tctl &= ~E1000_TCTL_EN; - ew32(TCTL, tctl); - /* flush both disables and wait for them to finish */ - e1e_flush(); - msleep(10); - - napi_disable(&adapter->napi); - atomic_set(&adapter->irq_sem, 0); - e1000_irq_disable(adapter); - - del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_info_timer); - - netdev->tx_queue_len = adapter->tx_queue_len; - netif_carrier_off(netdev); - adapter->link_speed = 0; - adapter->link_duplex = 0; - - e1000e_reset(adapter); - e1000_clean_tx_ring(adapter); - e1000_clean_rx_ring(adapter); - - /* - * TODO: for power management, we could drop the link and - * pci_disable_device here. - */ -} - -void e1000e_reinit_locked(struct e1000_adapter *adapter) -{ - might_sleep(); - while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) - msleep(1); - e1000e_down(adapter); - e1000e_up(adapter); - clear_bit(__E1000_RESETTING, &adapter->state); -} - -/** - * e1000_sw_init - Initialize general software structures (struct e1000_adapter) - * @adapter: board private structure to initialize - * - * e1000_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - **/ -static int __devinit e1000_sw_init(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - - adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; - adapter->rx_ps_bsize0 = 128; - hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; - hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN; - - adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); - if (!adapter->tx_ring) - goto err; - - adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); - if (!adapter->rx_ring) - goto err; - - spin_lock_init(&adapter->tx_queue_lock); - - /* Explicitly disable IRQ since the NIC can be in any state. */ - atomic_set(&adapter->irq_sem, 0); - e1000_irq_disable(adapter); - - spin_lock_init(&adapter->stats_lock); - - set_bit(__E1000_DOWN, &adapter->state); - return 0; - -err: - ndev_err(netdev, "Unable to allocate memory for queues\n"); - kfree(adapter->rx_ring); - kfree(adapter->tx_ring); - return -ENOMEM; -} - -/** - * e1000_open - Called when a network interface is made active - * @netdev: network interface device structure - * - * Returns 0 on success, negative value on failure - * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. - **/ -static int e1000_open(struct net_device *netdev) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - int err; - - /* disallow open during test */ - if (test_bit(__E1000_TESTING, &adapter->state)) - return -EBUSY; - - /* allocate transmit descriptors */ - err = e1000e_setup_tx_resources(adapter); - if (err) - goto err_setup_tx; - - /* allocate receive descriptors */ - err = e1000e_setup_rx_resources(adapter); - if (err) - goto err_setup_rx; - - e1000e_power_up_phy(adapter); - - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - if ((adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) - e1000_update_mng_vlan(adapter); - - /* If AMT is enabled, let the firmware know that the network - * interface is now open */ - if ((adapter->flags & FLAG_HAS_AMT) && - e1000e_check_mng_mode(&adapter->hw)) - e1000_get_hw_control(adapter); - - /* before we allocate an interrupt, we must be ready to handle it. - * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt - * as soon as we call pci_request_irq, so we have to setup our - * clean_rx handler before we do so. */ - e1000_configure(adapter); - - err = e1000_request_irq(adapter); - if (err) - goto err_req_irq; - - /* From here on the code is the same as e1000e_up() */ - clear_bit(__E1000_DOWN, &adapter->state); - - napi_enable(&adapter->napi); - - e1000_irq_enable(adapter); - - /* fire a link status change interrupt to start the watchdog */ - ew32(ICS, E1000_ICS_LSC); - - return 0; - -err_req_irq: - e1000_release_hw_control(adapter); - e1000_power_down_phy(adapter); - e1000e_free_rx_resources(adapter); -err_setup_rx: - e1000e_free_tx_resources(adapter); -err_setup_tx: - e1000e_reset(adapter); - - return err; -} - -/** - * e1000_close - Disables a network interface - * @netdev: network interface device structure - * - * Returns 0, this is not allowed to fail - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the drivers control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. - **/ -static int e1000_close(struct net_device *netdev) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - - WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); - e1000e_down(adapter); - e1000_power_down_phy(adapter); - e1000_free_irq(adapter); - - e1000e_free_tx_resources(adapter); - e1000e_free_rx_resources(adapter); - - /* kill manageability vlan ID if supported, but not if a vlan with - * the same ID is registered on the host OS (let 8021q kill it) */ - if ((adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && - !(adapter->vlgrp && - vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) - e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); - - /* If AMT is enabled, let the firmware know that the network - * interface is now closed */ - if ((adapter->flags & FLAG_HAS_AMT) && - e1000e_check_mng_mode(&adapter->hw)) - e1000_release_hw_control(adapter); - - return 0; -} -/** - * e1000_set_mac - Change the Ethernet Address of the NIC - * @netdev: network interface device structure - * @p: pointer to an address structure - * - * Returns 0 on success, negative on failure - **/ -static int e1000_set_mac(struct net_device *netdev, void *p) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - struct sockaddr *addr = p; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); - - e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0); - - if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) { - /* activate the work around */ - e1000e_set_laa_state_82571(&adapter->hw, 1); - - /* Hold a copy of the LAA in RAR[14] This is done so that - * between the time RAR[0] gets clobbered and the time it - * gets fixed (in e1000_watchdog), the actual LAA is in one - * of the RARs and no incoming packets directed to this port - * are dropped. Eventually the LAA will be in RAR[0] and - * RAR[14] */ - e1000e_rar_set(&adapter->hw, - adapter->hw.mac.addr, - adapter->hw.mac.rar_entry_count - 1); - } - - return 0; -} - -/* Need to wait a few seconds after link up to get diagnostic information from - * the phy */ -static void e1000_update_phy_info(unsigned long data) -{ - struct e1000_adapter *adapter = (struct e1000_adapter *) data; - e1000_get_phy_info(&adapter->hw); -} - -/** - * e1000e_update_stats - Update the board statistics counters - * @adapter: board private structure - **/ -void e1000e_update_stats(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct pci_dev *pdev = adapter->pdev; - unsigned long irq_flags; - u16 phy_tmp; - -#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF - - /* - * Prevent stats update while adapter is being reset, or if the pci - * connection is down. - */ - if (adapter->link_speed == 0) - return; - if (pci_channel_offline(pdev)) - return; - - spin_lock_irqsave(&adapter->stats_lock, irq_flags); - - /* these counters are modified from e1000_adjust_tbi_stats, - * called from the interrupt context, so they must only - * be written while holding adapter->stats_lock - */ - - adapter->stats.crcerrs += er32(CRCERRS); - adapter->stats.gprc += er32(GPRC); - adapter->stats.gorcl += er32(GORCL); - adapter->stats.gorch += er32(GORCH); - adapter->stats.bprc += er32(BPRC); - adapter->stats.mprc += er32(MPRC); - adapter->stats.roc += er32(ROC); - - if (adapter->flags & FLAG_HAS_STATS_PTC_PRC) { - adapter->stats.prc64 += er32(PRC64); - adapter->stats.prc127 += er32(PRC127); - adapter->stats.prc255 += er32(PRC255); - adapter->stats.prc511 += er32(PRC511); - adapter->stats.prc1023 += er32(PRC1023); - adapter->stats.prc1522 += er32(PRC1522); - adapter->stats.symerrs += er32(SYMERRS); - adapter->stats.sec += er32(SEC); - } - - adapter->stats.mpc += er32(MPC); - adapter->stats.scc += er32(SCC); - adapter->stats.ecol += er32(ECOL); - adapter->stats.mcc += er32(MCC); - adapter->stats.latecol += er32(LATECOL); - adapter->stats.dc += er32(DC); - adapter->stats.rlec += er32(RLEC); - adapter->stats.xonrxc += er32(XONRXC); - adapter->stats.xontxc += er32(XONTXC); - adapter->stats.xoffrxc += er32(XOFFRXC); - adapter->stats.xofftxc += er32(XOFFTXC); - adapter->stats.fcruc += er32(FCRUC); - adapter->stats.gptc += er32(GPTC); - adapter->stats.gotcl += er32(GOTCL); - adapter->stats.gotch += er32(GOTCH); - adapter->stats.rnbc += er32(RNBC); - adapter->stats.ruc += er32(RUC); - adapter->stats.rfc += er32(RFC); - adapter->stats.rjc += er32(RJC); - adapter->stats.torl += er32(TORL); - adapter->stats.torh += er32(TORH); - adapter->stats.totl += er32(TOTL); - adapter->stats.toth += er32(TOTH); - adapter->stats.tpr += er32(TPR); - - if (adapter->flags & FLAG_HAS_STATS_PTC_PRC) { - adapter->stats.ptc64 += er32(PTC64); - adapter->stats.ptc127 += er32(PTC127); - adapter->stats.ptc255 += er32(PTC255); - adapter->stats.ptc511 += er32(PTC511); - adapter->stats.ptc1023 += er32(PTC1023); - adapter->stats.ptc1522 += er32(PTC1522); - } - - adapter->stats.mptc += er32(MPTC); - adapter->stats.bptc += er32(BPTC); - - /* used for adaptive IFS */ - - hw->mac.tx_packet_delta = er32(TPT); - adapter->stats.tpt += hw->mac.tx_packet_delta; - hw->mac.collision_delta = er32(COLC); - adapter->stats.colc += hw->mac.collision_delta; - - adapter->stats.algnerrc += er32(ALGNERRC); - adapter->stats.rxerrc += er32(RXERRC); - adapter->stats.tncrs += er32(TNCRS); - adapter->stats.cexterr += er32(CEXTERR); - adapter->stats.tsctc += er32(TSCTC); - adapter->stats.tsctfc += er32(TSCTFC); - - adapter->stats.iac += er32(IAC); - - if (adapter->flags & FLAG_HAS_STATS_ICR_ICT) { - adapter->stats.icrxoc += er32(ICRXOC); - adapter->stats.icrxptc += er32(ICRXPTC); - adapter->stats.icrxatc += er32(ICRXATC); - adapter->stats.ictxptc += er32(ICTXPTC); - adapter->stats.ictxatc += er32(ICTXATC); - adapter->stats.ictxqec += er32(ICTXQEC); - adapter->stats.ictxqmtc += er32(ICTXQMTC); - adapter->stats.icrxdmtc += er32(ICRXDMTC); - } - - /* Fill out the OS statistics structure */ - adapter->net_stats.multicast = adapter->stats.mprc; - adapter->net_stats.collisions = adapter->stats.colc; - - /* Rx Errors */ - - /* RLEC on some newer hardware can be incorrect so build - * our own version based on RUC and ROC */ - adapter->net_stats.rx_errors = adapter->stats.rxerrc + - adapter->stats.crcerrs + adapter->stats.algnerrc + - adapter->stats.ruc + adapter->stats.roc + - adapter->stats.cexterr; - adapter->net_stats.rx_length_errors = adapter->stats.ruc + - adapter->stats.roc; - adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; - adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; - adapter->net_stats.rx_missed_errors = adapter->stats.mpc; - - /* Tx Errors */ - adapter->net_stats.tx_errors = adapter->stats.ecol + - adapter->stats.latecol; - adapter->net_stats.tx_aborted_errors = adapter->stats.ecol; - adapter->net_stats.tx_window_errors = adapter->stats.latecol; - adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs; - - /* Tx Dropped needs to be maintained elsewhere */ - - /* Phy Stats */ - if (hw->media_type == e1000_media_type_copper) { - if ((adapter->link_speed == SPEED_1000) && - (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) { - phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; - adapter->phy_stats.idle_errors += phy_tmp; - } - } - - /* Management Stats */ - adapter->stats.mgptc += er32(MGTPTC); - adapter->stats.mgprc += er32(MGTPRC); - adapter->stats.mgpdc += er32(MGTPDC); - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); -} - -static void e1000_print_link_info(struct e1000_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct e1000_hw *hw = &adapter->hw; - u32 ctrl = er32(CTRL); - - ndev_info(netdev, - "Link is Up %d Mbps %s, Flow Control: %s\n", - adapter->link_speed, - (adapter->link_duplex == FULL_DUPLEX) ? - "Full Duplex" : "Half Duplex", - ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? - "RX/TX" : - ((ctrl & E1000_CTRL_RFCE) ? "RX" : - ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); -} - -/** - * e1000_watchdog - Timer Call-back - * @data: pointer to adapter cast into an unsigned long - **/ -static void e1000_watchdog(unsigned long data) -{ - struct e1000_adapter *adapter = (struct e1000_adapter *) data; - - /* Do the rest outside of interrupt context */ - schedule_work(&adapter->watchdog_task); - - /* TODO: make this use queue_delayed_work() */ -} - -static void e1000_watchdog_task(struct work_struct *work) -{ - struct e1000_adapter *adapter = container_of(work, - struct e1000_adapter, watchdog_task); - - struct net_device *netdev = adapter->netdev; - struct e1000_mac_info *mac = &adapter->hw.mac; - struct e1000_ring *tx_ring = adapter->tx_ring; - struct e1000_hw *hw = &adapter->hw; - u32 link, tctl; - s32 ret_val; - int tx_pending = 0; - - if ((netif_carrier_ok(netdev)) && - (er32(STATUS) & E1000_STATUS_LU)) - goto link_up; - - ret_val = mac->ops.check_for_link(hw); - if ((ret_val == E1000_ERR_PHY) && - (adapter->hw.phy.type == e1000_phy_igp_3) && - (er32(CTRL) & - E1000_PHY_CTRL_GBE_DISABLE)) { - /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ - ndev_info(netdev, - "Gigabit has been disabled, downgrading speed\n"); - } - - if ((e1000e_enable_tx_pkt_filtering(hw)) && - (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)) - e1000_update_mng_vlan(adapter); - - if ((adapter->hw.media_type == e1000_media_type_internal_serdes) && - !(er32(TXCW) & E1000_TXCW_ANE)) - link = adapter->hw.mac.serdes_has_link; - else - link = er32(STATUS) & E1000_STATUS_LU; - - if (link) { - if (!netif_carrier_ok(netdev)) { - bool txb2b = 1; - mac->ops.get_link_up_info(&adapter->hw, - &adapter->link_speed, - &adapter->link_duplex); - e1000_print_link_info(adapter); - /* tweak tx_queue_len according to speed/duplex - * and adjust the timeout factor */ - netdev->tx_queue_len = adapter->tx_queue_len; - adapter->tx_timeout_factor = 1; - switch (adapter->link_speed) { - case SPEED_10: - txb2b = 0; - netdev->tx_queue_len = 10; - adapter->tx_timeout_factor = 14; - break; - case SPEED_100: - txb2b = 0; - netdev->tx_queue_len = 100; - /* maybe add some timeout factor ? */ - break; - } - - /* workaround: re-program speed mode bit after - * link-up event */ - if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && - !txb2b) { - u32 tarc0; - tarc0 = er32(TARC0); - tarc0 &= ~SPEED_MODE_BIT; - ew32(TARC0, tarc0); - } - - /* disable TSO for pcie and 10/100 speeds, to avoid - * some hardware issues */ - if (!(adapter->flags & FLAG_TSO_FORCE)) { - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - ndev_info(netdev, - "10/100 speed: disabling TSO\n"); - netdev->features &= ~NETIF_F_TSO; - netdev->features &= ~NETIF_F_TSO6; - break; - case SPEED_1000: - netdev->features |= NETIF_F_TSO; - netdev->features |= NETIF_F_TSO6; - break; - default: - /* oops */ - break; - } - } - - /* enable transmits in the hardware, need to do this - * after setting TARC0 */ - tctl = er32(TCTL); - tctl |= E1000_TCTL_EN; - ew32(TCTL, tctl); - - netif_carrier_on(netdev); - netif_wake_queue(netdev); - - if (!test_bit(__E1000_DOWN, &adapter->state)) - mod_timer(&adapter->phy_info_timer, - round_jiffies(jiffies + 2 * HZ)); - } else { - /* make sure the receive unit is started */ - if (adapter->flags & FLAG_RX_NEEDS_RESTART) { - u32 rctl = er32(RCTL); - ew32(RCTL, rctl | - E1000_RCTL_EN); - } - } - } else { - if (netif_carrier_ok(netdev)) { - adapter->link_speed = 0; - adapter->link_duplex = 0; - ndev_info(netdev, "Link is Down\n"); - netif_carrier_off(netdev); - netif_stop_queue(netdev); - if (!test_bit(__E1000_DOWN, &adapter->state)) - mod_timer(&adapter->phy_info_timer, - round_jiffies(jiffies + 2 * HZ)); - - if (adapter->flags & FLAG_RX_NEEDS_RESTART) - schedule_work(&adapter->reset_task); - } - } - -link_up: - e1000e_update_stats(adapter); - - mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; - adapter->tpt_old = adapter->stats.tpt; - mac->collision_delta = adapter->stats.colc - adapter->colc_old; - adapter->colc_old = adapter->stats.colc; - - adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old; - adapter->gorcl_old = adapter->stats.gorcl; - adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old; - adapter->gotcl_old = adapter->stats.gotcl; - - e1000e_update_adaptive(&adapter->hw); - - if (!netif_carrier_ok(netdev)) { - tx_pending = (e1000_desc_unused(tx_ring) + 1 < - tx_ring->count); - if (tx_pending) { - /* We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). */ - adapter->tx_timeout_count++; - schedule_work(&adapter->reset_task); - } - } - - /* Cause software interrupt to ensure rx ring is cleaned */ - ew32(ICS, E1000_ICS_RXDMT0); - - /* Force detection of hung controller every watchdog period */ - adapter->detect_tx_hung = 1; - - /* With 82571 controllers, LAA may be overwritten due to controller - * reset from the other port. Set the appropriate LAA in RAR[0] */ - if (e1000e_get_laa_state_82571(hw)) - e1000e_rar_set(hw, adapter->hw.mac.addr, 0); - - /* Reset the timer */ - if (!test_bit(__E1000_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, - round_jiffies(jiffies + 2 * HZ)); -} - -#define E1000_TX_FLAGS_CSUM 0x00000001 -#define E1000_TX_FLAGS_VLAN 0x00000002 -#define E1000_TX_FLAGS_TSO 0x00000004 -#define E1000_TX_FLAGS_IPV4 0x00000008 -#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 -#define E1000_TX_FLAGS_VLAN_SHIFT 16 - -static int e1000_tso(struct e1000_adapter *adapter, - struct sk_buff *skb) -{ - struct e1000_ring *tx_ring = adapter->tx_ring; - struct e1000_context_desc *context_desc; - struct e1000_buffer *buffer_info; - unsigned int i; - u32 cmd_length = 0; - u16 ipcse = 0, tucse, mss; - u8 ipcss, ipcso, tucss, tucso, hdr_len; - int err; - - if (skb_is_gso(skb)) { - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } - - hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - mss = skb_shinfo(skb)->gso_size; - if (skb->protocol == htons(ETH_P_IP)) { - struct iphdr *iph = ip_hdr(skb); - iph->tot_len = 0; - iph->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, - IPPROTO_TCP, - 0); - cmd_length = E1000_TXD_CMD_IP; - ipcse = skb_transport_offset(skb) - 1; - } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { - ipv6_hdr(skb)->payload_len = 0; - tcp_hdr(skb)->check = - ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - 0, IPPROTO_TCP, 0); - ipcse = 0; - } - ipcss = skb_network_offset(skb); - ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data; - tucss = skb_transport_offset(skb); - tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; - tucse = 0; - - cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | - E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); - - i = tx_ring->next_to_use; - context_desc = E1000_CONTEXT_DESC(*tx_ring, i); - buffer_info = &tx_ring->buffer_info[i]; - - context_desc->lower_setup.ip_fields.ipcss = ipcss; - context_desc->lower_setup.ip_fields.ipcso = ipcso; - context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); - context_desc->upper_setup.tcp_fields.tucss = tucss; - context_desc->upper_setup.tcp_fields.tucso = tucso; - context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse); - context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); - context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; - context_desc->cmd_and_length = cpu_to_le32(cmd_length); - - buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; - - i++; - if (i == tx_ring->count) - i = 0; - tx_ring->next_to_use = i; - - return 1; - } - - return 0; -} - -static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) -{ - struct e1000_ring *tx_ring = adapter->tx_ring; - struct e1000_context_desc *context_desc; - struct e1000_buffer *buffer_info; - unsigned int i; - u8 css; - - if (skb->ip_summed == CHECKSUM_PARTIAL) { - css = skb_transport_offset(skb); - - i = tx_ring->next_to_use; - buffer_info = &tx_ring->buffer_info[i]; - context_desc = E1000_CONTEXT_DESC(*tx_ring, i); - - context_desc->lower_setup.ip_config = 0; - context_desc->upper_setup.tcp_fields.tucss = css; - context_desc->upper_setup.tcp_fields.tucso = - css + skb->csum_offset; - context_desc->upper_setup.tcp_fields.tucse = 0; - context_desc->tcp_seg_setup.data = 0; - context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT); - - buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; - - i++; - if (i == tx_ring->count) - i = 0; - tx_ring->next_to_use = i; - - return 1; - } - - return 0; -} - -#define E1000_MAX_PER_TXD 8192 -#define E1000_MAX_TXD_PWR 12 - -static int e1000_tx_map(struct e1000_adapter *adapter, - struct sk_buff *skb, unsigned int first, - unsigned int max_per_txd, unsigned int nr_frags, - unsigned int mss) -{ - struct e1000_ring *tx_ring = adapter->tx_ring; - struct e1000_buffer *buffer_info; - unsigned int len = skb->len - skb->data_len; - unsigned int offset = 0, size, count = 0, i; - unsigned int f; - - i = tx_ring->next_to_use; - - while (len) { - buffer_info = &tx_ring->buffer_info[i]; - size = min(len, max_per_txd); - - /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ - if (mss && !nr_frags && size == len && size > 8) - size -= 4; - - buffer_info->length = size; - /* set time_stamp *before* dma to help avoid a possible race */ - buffer_info->time_stamp = jiffies; - buffer_info->dma = - pci_map_single(adapter->pdev, - skb->data + offset, - size, - PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(buffer_info->dma)) { - dev_err(&adapter->pdev->dev, "TX DMA map failed\n"); - adapter->tx_dma_failed++; - return -1; - } - buffer_info->next_to_watch = i; - - len -= size; - offset += size; - count++; - i++; - if (i == tx_ring->count) - i = 0; - } - - for (f = 0; f < nr_frags; f++) { - struct skb_frag_struct *frag; - - frag = &skb_shinfo(skb)->frags[f]; - len = frag->size; - offset = frag->page_offset; - - while (len) { - buffer_info = &tx_ring->buffer_info[i]; - size = min(len, max_per_txd); - /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ - if (mss && f == (nr_frags-1) && size == len && size > 8) - size -= 4; - - buffer_info->length = size; - buffer_info->time_stamp = jiffies; - buffer_info->dma = - pci_map_page(adapter->pdev, - frag->page, - offset, - size, - PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(buffer_info->dma)) { - dev_err(&adapter->pdev->dev, - "TX DMA page map failed\n"); - adapter->tx_dma_failed++; - return -1; - } - - buffer_info->next_to_watch = i; - - len -= size; - offset += size; - count++; - - i++; - if (i == tx_ring->count) - i = 0; - } - } - - if (i == 0) - i = tx_ring->count - 1; - else - i--; - - tx_ring->buffer_info[i].skb = skb; - tx_ring->buffer_info[first].next_to_watch = i; - - return count; -} - -static void e1000_tx_queue(struct e1000_adapter *adapter, - int tx_flags, int count) -{ - struct e1000_ring *tx_ring = adapter->tx_ring; - struct e1000_tx_desc *tx_desc = NULL; - struct e1000_buffer *buffer_info; - u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS; - unsigned int i; - - if (tx_flags & E1000_TX_FLAGS_TSO) { - txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | - E1000_TXD_CMD_TSE; - txd_upper |= E1000_TXD_POPTS_TXSM << 8; - - if (tx_flags & E1000_TX_FLAGS_IPV4) - txd_upper |= E1000_TXD_POPTS_IXSM << 8; - } - - if (tx_flags & E1000_TX_FLAGS_CSUM) { - txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; - txd_upper |= E1000_TXD_POPTS_TXSM << 8; - } - - if (tx_flags & E1000_TX_FLAGS_VLAN) { - txd_lower |= E1000_TXD_CMD_VLE; - txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK); - } - - i = tx_ring->next_to_use; - - while (count--) { - buffer_info = &tx_ring->buffer_info[i]; - tx_desc = E1000_TX_DESC(*tx_ring, i); - tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); - tx_desc->lower.data = - cpu_to_le32(txd_lower | buffer_info->length); - tx_desc->upper.data = cpu_to_le32(txd_upper); - - i++; - if (i == tx_ring->count) - i = 0; - } - - tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); - - /* Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). */ - wmb(); - - tx_ring->next_to_use = i; - writel(i, adapter->hw.hw_addr + tx_ring->tail); - /* we need this if more than one processor can write to our tail - * at a time, it synchronizes IO on IA64/Altix systems */ - mmiowb(); -} - -#define MINIMUM_DHCP_PACKET_SIZE 282 -static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, - struct sk_buff *skb) -{ - struct e1000_hw *hw = &adapter->hw; - u16 length, offset; - - if (vlan_tx_tag_present(skb)) { - if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) - && (adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) - return 0; - } - - if (skb->len <= MINIMUM_DHCP_PACKET_SIZE) - return 0; - - if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP)) - return 0; - - { - const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14); - struct udphdr *udp; - - if (ip->protocol != IPPROTO_UDP) - return 0; - - udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2)); - if (ntohs(udp->dest) != 67) - return 0; - - offset = (u8 *)udp + 8 - skb->data; - length = skb->len - offset; - return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length); - } - - return 0; -} - -static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - - netif_stop_queue(netdev); - /* Herbert's original patch had: - * smp_mb__after_netif_stop_queue(); - * but since that doesn't exist yet, just open code it. */ - smp_mb(); - - /* We need to check again in a case another CPU has just - * made room available. */ - if (e1000_desc_unused(adapter->tx_ring) < size) - return -EBUSY; - - /* A reprieve! */ - netif_start_queue(netdev); - ++adapter->restart_queue; - return 0; -} - -static int e1000_maybe_stop_tx(struct net_device *netdev, int size) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - - if (e1000_desc_unused(adapter->tx_ring) >= size) - return 0; - return __e1000_maybe_stop_tx(netdev, size); -} - -#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) -static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_ring *tx_ring = adapter->tx_ring; - unsigned int first; - unsigned int max_per_txd = E1000_MAX_PER_TXD; - unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; - unsigned int tx_flags = 0; - unsigned int len = skb->len - skb->data_len; - unsigned long irq_flags; - unsigned int nr_frags; - unsigned int mss; - int count = 0; - int tso; - unsigned int f; - - if (test_bit(__E1000_DOWN, &adapter->state)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (skb->len <= 0) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - mss = skb_shinfo(skb)->gso_size; - /* The controller does a simple calculation to - * make sure there is enough room in the FIFO before - * initiating the DMA for each buffer. The calc is: - * 4 = ceil(buffer len/mss). To make sure we don't - * overrun the FIFO, adjust the max buffer len if mss - * drops. */ - if (mss) { - u8 hdr_len; - max_per_txd = min(mss << 2, max_per_txd); - max_txd_pwr = fls(max_per_txd) - 1; - - /* TSO Workaround for 82571/2/3 Controllers -- if skb->data - * points to just header, pull a few bytes of payload from - * frags into skb->data */ - hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - if (skb->data_len && (hdr_len == len)) { - unsigned int pull_size; - - pull_size = min((unsigned int)4, skb->data_len); - if (!__pskb_pull_tail(skb, pull_size)) { - ndev_err(netdev, - "__pskb_pull_tail failed.\n"); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - len = skb->len - skb->data_len; - } - } - - /* reserve a descriptor for the offload context */ - if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) - count++; - count++; - - count += TXD_USE_COUNT(len, max_txd_pwr); - - nr_frags = skb_shinfo(skb)->nr_frags; - for (f = 0; f < nr_frags; f++) - count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size, - max_txd_pwr); - - if (adapter->hw.mac.tx_pkt_filtering) - e1000_transfer_dhcp_info(adapter, skb); - - if (!spin_trylock_irqsave(&adapter->tx_queue_lock, irq_flags)) - /* Collision - tell upper layer to requeue */ - return NETDEV_TX_LOCKED; - - /* need: count + 2 desc gap to keep tail from touching - * head, otherwise try next time */ - if (e1000_maybe_stop_tx(netdev, count + 2)) { - spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); - return NETDEV_TX_BUSY; - } - - if (adapter->vlgrp && vlan_tx_tag_present(skb)) { - tx_flags |= E1000_TX_FLAGS_VLAN; - tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT); - } - - first = tx_ring->next_to_use; - - tso = e1000_tso(adapter, skb); - if (tso < 0) { - dev_kfree_skb_any(skb); - spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); - return NETDEV_TX_OK; - } - - if (tso) - tx_flags |= E1000_TX_FLAGS_TSO; - else if (e1000_tx_csum(adapter, skb)) - tx_flags |= E1000_TX_FLAGS_CSUM; - - /* Old method was to assume IPv4 packet by default if TSO was enabled. - * 82571 hardware supports TSO capabilities for IPv6 as well... - * no longer assume, we must. */ - if (skb->protocol == htons(ETH_P_IP)) - tx_flags |= E1000_TX_FLAGS_IPV4; - - count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss); - if (count < 0) { - /* handle pci_map_single() error in e1000_tx_map */ - dev_kfree_skb_any(skb); - spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); - return NETDEV_TX_OK; - } - - e1000_tx_queue(adapter, tx_flags, count); - - netdev->trans_start = jiffies; - - /* Make sure there is space in the ring for the next send. */ - e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2); - - spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); - return NETDEV_TX_OK; -} - -/** - * e1000_tx_timeout - Respond to a Tx Hang - * @netdev: network interface device structure - **/ -static void e1000_tx_timeout(struct net_device *netdev) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - - /* Do the reset outside of interrupt context */ - adapter->tx_timeout_count++; - schedule_work(&adapter->reset_task); -} - -static void e1000_reset_task(struct work_struct *work) -{ - struct e1000_adapter *adapter; - adapter = container_of(work, struct e1000_adapter, reset_task); - - e1000e_reinit_locked(adapter); -} - -/** - * e1000_get_stats - Get System Network Statistics - * @netdev: network interface device structure - * - * Returns the address of the device statistics structure. - * The statistics are actually updated from the timer callback. - **/ -static struct net_device_stats *e1000_get_stats(struct net_device *netdev) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - - /* only return the current stats */ - return &adapter->net_stats; -} - -/** - * e1000_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size - * - * Returns 0 on success, negative on failure - **/ -static int e1000_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - ndev_err(netdev, "Invalid MTU setting\n"); - return -EINVAL; - } - - /* Jumbo frame size limits */ - if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { - if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { - ndev_err(netdev, "Jumbo Frames not supported.\n"); - return -EINVAL; - } - if (adapter->hw.phy.type == e1000_phy_ife) { - ndev_err(netdev, "Jumbo Frames not supported.\n"); - return -EINVAL; - } - } - -#define MAX_STD_JUMBO_FRAME_SIZE 9234 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - ndev_err(netdev, "MTU > 9216 not supported.\n"); - return -EINVAL; - } - - while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) - msleep(1); - /* e1000e_down has a dependency on max_frame_size */ - adapter->hw.mac.max_frame_size = max_frame; - if (netif_running(netdev)) - e1000e_down(adapter); - - /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN - * means we reserve 2 more, this pushes us to allocate from the next - * larger slab size. - * i.e. RXBUFFER_2048 --> size-4096 slab */ - - if (max_frame <= 256) - adapter->rx_buffer_len = 256; - else if (max_frame <= 512) - adapter->rx_buffer_len = 512; - else if (max_frame <= 1024) - adapter->rx_buffer_len = 1024; - else if (max_frame <= 2048) - adapter->rx_buffer_len = 2048; - else - adapter->rx_buffer_len = 4096; - - /* adjust allocation if LPE protects us, and we aren't using SBP */ - if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || - (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) - adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN - + ETH_FCS_LEN ; - - ndev_info(netdev, "changing MTU from %d to %d\n", - netdev->mtu, new_mtu); - netdev->mtu = new_mtu; - - if (netif_running(netdev)) - e1000e_up(adapter); - else - e1000e_reset(adapter); - - clear_bit(__E1000_RESETTING, &adapter->state); - - return 0; -} - -static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, - int cmd) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - struct mii_ioctl_data *data = if_mii(ifr); - unsigned long irq_flags; - - if (adapter->hw.media_type != e1000_media_type_copper) - return -EOPNOTSUPP; - - switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = adapter->hw.phy.addr; - break; - case SIOCGMIIREG: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); - if (e1e_rphy(&adapter->hw, data->reg_num & 0x1F, - &data->val_out)) { - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); - return -EIO; - } - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); - break; - case SIOCSMIIREG: - default: - return -EOPNOTSUPP; - } - return 0; -} - -static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - switch (cmd) { - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - return e1000_mii_ioctl(netdev, ifr, cmd); - default: - return -EOPNOTSUPP; - } -} - -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl, ctrl_ext, rctl, status; - u32 wufc = adapter->wol; - int retval = 0; - - netif_device_detach(netdev); - - if (netif_running(netdev)) { - WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); - e1000e_down(adapter); - e1000_free_irq(adapter); - } - - retval = pci_save_state(pdev); - if (retval) - return retval; - - status = er32(STATUS); - if (status & E1000_STATUS_LU) - wufc &= ~E1000_WUFC_LNKC; - - if (wufc) { - e1000_setup_rctl(adapter); - e1000_set_multi(netdev); - - /* turn on all-multi mode if wake on multicast is enabled */ - if (wufc & E1000_WUFC_MC) { - rctl = er32(RCTL); - rctl |= E1000_RCTL_MPE; - ew32(RCTL, rctl); - } - - ctrl = er32(CTRL); - /* advertise wake from D3Cold */ - #define E1000_CTRL_ADVD3WUC 0x00100000 - /* phy power management enable */ - #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 - ctrl |= E1000_CTRL_ADVD3WUC | - E1000_CTRL_EN_PHY_PWR_MGMT; - ew32(CTRL, ctrl); - - if (adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) { - /* keep the laser running in D3 */ - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA; - ew32(CTRL_EXT, ctrl_ext); - } - - /* Allow time for pending master requests to run */ - e1000e_disable_pcie_master(&adapter->hw); - - ew32(WUC, E1000_WUC_PME_EN); - ew32(WUFC, wufc); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } else { - ew32(WUC, 0); - ew32(WUFC, 0); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - } - - /* make sure adapter isn't asleep if manageability is enabled */ - if (adapter->flags & FLAG_MNG_PT_ENABLED) { - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } - - if (adapter->hw.phy.type == e1000_phy_igp_3) - e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); - - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - e1000_release_hw_control(adapter); - - pci_disable_device(pdev); - - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - - return 0; -} - -static void e1000e_disable_l1aspm(struct pci_dev *pdev) -{ - int pos; - u16 val; - - /* - * 82573 workaround - disable L1 ASPM on mobile chipsets - * - * L1 ASPM on various mobile (ich7) chipsets do not behave properly - * resulting in lost data or garbage information on the pci-e link - * level. This could result in (false) bad EEPROM checksum errors, - * long ping times (up to 2s) or even a system freeze/hang. - * - * Unfortunately this feature saves about 1W power consumption when - * active. - */ - pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val); - if (val & 0x2) { - dev_warn(&pdev->dev, "Disabling L1 ASPM\n"); - val &= ~0x2; - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, val); - } -} - -#ifdef CONFIG_PM -static int e1000_resume(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 err; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - e1000e_disable_l1aspm(pdev); - err = pci_enable_device(pdev); - if (err) { - dev_err(&pdev->dev, - "Cannot enable PCI device from suspend\n"); - return err; - } - - pci_set_master(pdev); - - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - if (netif_running(netdev)) { - err = e1000_request_irq(adapter); - if (err) - return err; - } - - e1000e_power_up_phy(adapter); - e1000e_reset(adapter); - ew32(WUS, ~0); - - e1000_init_manageability(adapter); - - if (netif_running(netdev)) - e1000e_up(adapter); - - netif_device_attach(netdev); - - /* If the controller has AMT, do not set DRV_LOAD until the interface - * is up. For all other cases, let the f/w know that the h/w is now - * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw)) - e1000_get_hw_control(adapter); - - return 0; -} -#endif - -static void e1000_shutdown(struct pci_dev *pdev) -{ - e1000_suspend(pdev, PMSG_SUSPEND); -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void e1000_netpoll(struct net_device *netdev) -{ - struct e1000_adapter *adapter = netdev_priv(netdev); - - disable_irq(adapter->pdev->irq); - e1000_intr(adapter->pdev->irq, netdev); - - e1000_clean_tx_irq(adapter); - - enable_irq(adapter->pdev->irq); -} -#endif - -/** - * e1000_io_error_detected - called when PCI error is detected - * @pdev: Pointer to PCI device - * @state: The current pci connection state - * - * This function is called after a PCI bus error affecting - * this device has been detected. - */ -static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); - - netif_device_detach(netdev); - - if (netif_running(netdev)) - e1000e_down(adapter); - pci_disable_device(pdev); - - /* Request a slot slot reset. */ - return PCI_ERS_RESULT_NEED_RESET; -} - -/** - * e1000_io_slot_reset - called after the pci bus has been reset. - * @pdev: Pointer to PCI device - * - * Restart the card from scratch, as if from a cold-boot. Implementation - * resembles the first-half of the e1000_resume routine. - */ -static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - e1000e_disable_l1aspm(pdev); - if (pci_enable_device(pdev)) { - dev_err(&pdev->dev, - "Cannot re-enable PCI device after reset.\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - pci_set_master(pdev); - - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - e1000e_reset(adapter); - ew32(WUS, ~0); - - return PCI_ERS_RESULT_RECOVERED; -} - -/** - * e1000_io_resume - called when traffic can start flowing again. - * @pdev: Pointer to PCI device - * - * This callback is called when the error recovery driver tells us that - * its OK to resume normal operation. Implementation resembles the - * second-half of the e1000_resume routine. - */ -static void e1000_io_resume(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); - - e1000_init_manageability(adapter); - - if (netif_running(netdev)) { - if (e1000e_up(adapter)) { - dev_err(&pdev->dev, - "can't bring device back up after reset\n"); - return; - } - } - - netif_device_attach(netdev); - - /* If the controller has AMT, do not set DRV_LOAD until the interface - * is up. For all other cases, let the f/w know that the h/w is now - * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || - !e1000e_check_mng_mode(&adapter->hw)) - e1000_get_hw_control(adapter); - -} - -static void e1000_print_device_info(struct e1000_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 part_num; - - /* print bus type/speed/width info */ - ndev_info(netdev, "(PCI Express:2.5GB/s:%s) " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - /* bus width */ - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - "Width x1"), - /* MAC address */ - netdev->dev_addr[0], netdev->dev_addr[1], - netdev->dev_addr[2], netdev->dev_addr[3], - netdev->dev_addr[4], netdev->dev_addr[5]); - ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n", - (hw->phy.type == e1000_phy_ife) - ? "10/100" : "1000"); - e1000e_read_part_num(hw, &part_num); - ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", - hw->mac.type, hw->phy.type, - (part_num >> 8), (part_num & 0xff)); -} - -/** - * e1000_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in e1000_pci_tbl - * - * Returns 0 on success, negative on failure - * - * e1000_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - **/ -static int __devinit e1000_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *netdev; - struct e1000_adapter *adapter; - struct e1000_hw *hw; - const struct e1000_info *ei = e1000_info_tbl[ent->driver_data]; - unsigned long mmio_start, mmio_len; - unsigned long flash_start, flash_len; - - static int cards_found; - int i, err, pci_using_dac; - u16 eeprom_data = 0; - u16 eeprom_apme_mask = E1000_EEPROM_APME; - - e1000e_disable_l1aspm(pdev); - err = pci_enable_device(pdev); - if (err) - return err; - - pci_using_dac = 0; - err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); - if (!err) { - err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (!err) - pci_using_dac = 1; - } else { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (err) { - err = pci_set_consistent_dma_mask(pdev, - DMA_32BIT_MASK); - if (err) { - dev_err(&pdev->dev, "No usable DMA " - "configuration, aborting\n"); - goto err_dma; - } - } - } - - err = pci_request_regions(pdev, e1000e_driver_name); - if (err) - goto err_pci_reg; - - pci_set_master(pdev); - - err = -ENOMEM; - netdev = alloc_etherdev(sizeof(struct e1000_adapter)); - if (!netdev) - goto err_alloc_etherdev; - - SET_NETDEV_DEV(netdev, &pdev->dev); - - pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - hw = &adapter->hw; - adapter->netdev = netdev; - adapter->pdev = pdev; - adapter->ei = ei; - adapter->pba = ei->pba; - adapter->flags = ei->flags; - adapter->hw.adapter = adapter; - adapter->hw.mac.type = ei->mac; - adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; - - mmio_start = pci_resource_start(pdev, 0); - mmio_len = pci_resource_len(pdev, 0); - - err = -EIO; - adapter->hw.hw_addr = ioremap(mmio_start, mmio_len); - if (!adapter->hw.hw_addr) - goto err_ioremap; - - if ((adapter->flags & FLAG_HAS_FLASH) && - (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { - flash_start = pci_resource_start(pdev, 1); - flash_len = pci_resource_len(pdev, 1); - adapter->hw.flash_address = ioremap(flash_start, flash_len); - if (!adapter->hw.flash_address) - goto err_flashmap; - } - - /* construct the net_device struct */ - netdev->open = &e1000_open; - netdev->stop = &e1000_close; - netdev->hard_start_xmit = &e1000_xmit_frame; - netdev->get_stats = &e1000_get_stats; - netdev->set_multicast_list = &e1000_set_multi; - netdev->set_mac_address = &e1000_set_mac; - netdev->change_mtu = &e1000_change_mtu; - netdev->do_ioctl = &e1000_ioctl; - e1000e_set_ethtool_ops(netdev); - netdev->tx_timeout = &e1000_tx_timeout; - netdev->watchdog_timeo = 5 * HZ; - netif_napi_add(netdev, &adapter->napi, e1000_clean, 64); - netdev->vlan_rx_register = e1000_vlan_rx_register; - netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid; - netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = e1000_netpoll; -#endif - strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); - - netdev->mem_start = mmio_start; - netdev->mem_end = mmio_start + mmio_len; - - adapter->bd_number = cards_found++; - - /* setup adapter struct */ - err = e1000_sw_init(adapter); - if (err) - goto err_sw_init; - - err = -EIO; - - memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); - memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops)); - memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); - - err = ei->get_invariants(adapter); - if (err) - goto err_hw_init; - - hw->mac.ops.get_bus_info(&adapter->hw); - - adapter->hw.phy.wait_for_link = 0; - - /* Copper options */ - if (adapter->hw.media_type == e1000_media_type_copper) { - adapter->hw.phy.mdix = AUTO_ALL_MODES; - adapter->hw.phy.disable_polarity_correction = 0; - adapter->hw.phy.ms_type = e1000_ms_hw_default; - } - - if (e1000_check_reset_block(&adapter->hw)) - ndev_info(netdev, - "PHY reset is blocked due to SOL/IDER session.\n"); - - netdev->features = NETIF_F_SG | - NETIF_F_HW_CSUM | - NETIF_F_HW_VLAN_TX | - NETIF_F_HW_VLAN_RX; - - if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) - netdev->features |= NETIF_F_HW_VLAN_FILTER; - - netdev->features |= NETIF_F_TSO; - netdev->features |= NETIF_F_TSO6; - - if (pci_using_dac) - netdev->features |= NETIF_F_HIGHDMA; - - /* We should not be using LLTX anymore, but we are still TX faster with - * it. */ - netdev->features |= NETIF_F_LLTX; - - if (e1000e_enable_mng_pass_thru(&adapter->hw)) - adapter->flags |= FLAG_MNG_PT_ENABLED; - - /* before reading the NVM, reset the controller to - * put the device in a known good starting state */ - adapter->hw.mac.ops.reset_hw(&adapter->hw); - - /* - * systems with ASPM and others may see the checksum fail on the first - * attempt. Let's give it a few tries - */ - for (i = 0;; i++) { - if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) - break; - if (i == 2) { - ndev_err(netdev, "The NVM Checksum Is Not Valid\n"); - err = -EIO; - goto err_eeprom; - } - } - - /* copy the MAC address out of the NVM */ - if (e1000e_read_mac_addr(&adapter->hw)) - ndev_err(netdev, "NVM Read Error while reading MAC address\n"); - - memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->perm_addr)) { - ndev_err(netdev, "Invalid MAC Address: " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - netdev->perm_addr[0], netdev->perm_addr[1], - netdev->perm_addr[2], netdev->perm_addr[3], - netdev->perm_addr[4], netdev->perm_addr[5]); - err = -EIO; - goto err_eeprom; - } - - init_timer(&adapter->watchdog_timer); - adapter->watchdog_timer.function = &e1000_watchdog; - adapter->watchdog_timer.data = (unsigned long) adapter; - - init_timer(&adapter->phy_info_timer); - adapter->phy_info_timer.function = &e1000_update_phy_info; - adapter->phy_info_timer.data = (unsigned long) adapter; - - INIT_WORK(&adapter->reset_task, e1000_reset_task); - INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); - - e1000e_check_options(adapter); - - /* Initialize link parameters. User can change them with ethtool */ - adapter->hw.mac.autoneg = 1; - adapter->fc_autoneg = 1; - adapter->hw.mac.original_fc = e1000_fc_default; - adapter->hw.mac.fc = e1000_fc_default; - adapter->hw.phy.autoneg_advertised = 0x2f; - - /* ring size defaults */ - adapter->rx_ring->count = 256; - adapter->tx_ring->count = 256; - - /* - * Initial Wake on LAN setting - If APM wake is enabled in - * the EEPROM, enable the ACPI Magic Packet filter - */ - if (adapter->flags & FLAG_APME_IN_WUC) { - /* APME bit in EEPROM is mapped to WUC.APME */ - eeprom_data = er32(WUC); - eeprom_apme_mask = E1000_WUC_APME; - } else if (adapter->flags & FLAG_APME_IN_CTRL3) { - if (adapter->flags & FLAG_APME_CHECK_PORT_B && - (adapter->hw.bus.func == 1)) - e1000_read_nvm(&adapter->hw, - NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); - else - e1000_read_nvm(&adapter->hw, - NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data); - } - - /* fetch WoL from EEPROM */ - if (eeprom_data & eeprom_apme_mask) - adapter->eeprom_wol |= E1000_WUFC_MAG; - - /* - * now that we have the eeprom settings, apply the special cases - * where the eeprom may be wrong or the board simply won't support - * wake on lan on a particular port - */ - if (!(adapter->flags & FLAG_HAS_WOL)) - adapter->eeprom_wol = 0; - - /* initialize the wol settings based on the eeprom settings */ - adapter->wol = adapter->eeprom_wol; - - /* reset the hardware with the new settings */ - e1000e_reset(adapter); - - /* If the controller has AMT, do not set DRV_LOAD until the interface - * is up. For all other cases, let the f/w know that the h/w is now - * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || - !e1000e_check_mng_mode(&adapter->hw)) - e1000_get_hw_control(adapter); - - /* tell the stack to leave us alone until e1000_open() is called */ - netif_carrier_off(netdev); - netif_stop_queue(netdev); - - strcpy(netdev->name, "eth%d"); - err = register_netdev(netdev); - if (err) - goto err_register; - - e1000_print_device_info(adapter); - - return 0; - -err_register: -err_hw_init: - e1000_release_hw_control(adapter); -err_eeprom: - if (!e1000_check_reset_block(&adapter->hw)) - e1000_phy_hw_reset(&adapter->hw); - - if (adapter->hw.flash_address) - iounmap(adapter->hw.flash_address); - -err_flashmap: - kfree(adapter->tx_ring); - kfree(adapter->rx_ring); -err_sw_init: - iounmap(adapter->hw.hw_addr); -err_ioremap: - free_netdev(netdev); -err_alloc_etherdev: - pci_release_regions(pdev); -err_pci_reg: -err_dma: - pci_disable_device(pdev); - return err; -} - -/** - * e1000_remove - Device Removal Routine - * @pdev: PCI device information struct - * - * e1000_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. - **/ -static void __devexit e1000_remove(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); - - /* flush_scheduled work may reschedule our watchdog task, so - * explicitly disable watchdog tasks from being rescheduled */ - set_bit(__E1000_DOWN, &adapter->state); - del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_info_timer); - - flush_scheduled_work(); - - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - e1000_release_hw_control(adapter); - - unregister_netdev(netdev); - - if (!e1000_check_reset_block(&adapter->hw)) - e1000_phy_hw_reset(&adapter->hw); - - kfree(adapter->tx_ring); - kfree(adapter->rx_ring); - - iounmap(adapter->hw.hw_addr); - if (adapter->hw.flash_address) - iounmap(adapter->hw.flash_address); - pci_release_regions(pdev); - - free_netdev(netdev); - - pci_disable_device(pdev); -} - -/* PCI Error Recovery (ERS) */ -static struct pci_error_handlers e1000_err_handler = { - .error_detected = e1000_io_error_detected, - .slot_reset = e1000_io_slot_reset, - .resume = e1000_io_resume, -}; - -static struct pci_device_id e1000_pci_tbl[] = { - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT), - board_80003es2lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT), - board_80003es2lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT), - board_80003es2lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT), - board_80003es2lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan }, - - { } /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); - -/* PCI Device API Driver */ -static struct pci_driver e1000_driver = { - .name = e1000e_driver_name, - .id_table = e1000_pci_tbl, - .probe = e1000_probe, - .remove = __devexit_p(e1000_remove), -#ifdef CONFIG_PM - /* Power Managment Hooks */ - .suspend = e1000_suspend, - .resume = e1000_resume, -#endif - .shutdown = e1000_shutdown, - .err_handler = &e1000_err_handler -}; - -/** - * e1000_init_module - Driver Registration Routine - * - * e1000_init_module is the first routine called when the driver is - * loaded. All it does is register with the PCI subsystem. - **/ -static int __init e1000_init_module(void) -{ - int ret; - printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n", - e1000e_driver_name, e1000e_driver_version); - printk(KERN_INFO "%s: Copyright (c) 1999-2007 Intel Corporation.\n", - e1000e_driver_name); - ret = pci_register_driver(&e1000_driver); - - return ret; -} -module_init(e1000_init_module); - -/** - * e1000_exit_module - Driver Exit Cleanup Routine - * - * e1000_exit_module is called just before the driver is removed - * from memory. - **/ -static void __exit e1000_exit_module(void) -{ - pci_unregister_driver(&e1000_driver); -} -module_exit(e1000_exit_module); - - -MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); -MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -/* e1000_main.c */ |