diff options
Diffstat (limited to 'arch/sh/boards/se')
26 files changed, 0 insertions, 2571 deletions
diff --git a/arch/sh/boards/se/7300/Makefile b/arch/sh/boards/se/7300/Makefile deleted file mode 100644 index 0fbd4f47815..00000000000 --- a/arch/sh/boards/se/7300/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the 7300 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c deleted file mode 100644 index 8a03d7a52a7..00000000000 --- a/arch/sh/boards/se/7300/io.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * arch/sh/boards/se/7300/io.c - * - * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> - * Based on arch/sh/kernel/io_shmse.c - * - * I/O routine for SH-Mobile3 73180 SolutionEngine. - * - */ - -#include <linux/kernel.h> -#include <asm/io.h> -#include <asm/se7300.h> - -#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) - -struct iop { - unsigned long start, end; - unsigned long base; - struct iop *(*check) (struct iop * p, unsigned long port); - unsigned char (*inb) (struct iop * p, unsigned long port); - unsigned short (*inw) (struct iop * p, unsigned long port); - void (*outb) (struct iop * p, unsigned char value, unsigned long port); - void (*outw) (struct iop * p, unsigned short value, unsigned long port); -}; - -struct iop * -simple_check(struct iop *p, unsigned long port) -{ - if ((p->start <= port) && (port <= p->end)) - return p; - else - badio(check, port); -} - -struct iop * -ide_check(struct iop *p, unsigned long port) -{ - if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) - return p; - return NULL; -} - -unsigned char -simple_inb(struct iop *p, unsigned long port) -{ - return *(unsigned char *) (p->base + port); -} - -unsigned short -simple_inw(struct iop *p, unsigned long port) -{ - return *(unsigned short *) (p->base + port); -} - -void -simple_outb(struct iop *p, unsigned char value, unsigned long port) -{ - *(unsigned char *) (p->base + port) = value; -} - -void -simple_outw(struct iop *p, unsigned short value, unsigned long port) -{ - *(unsigned short *) (p->base + port) = value; -} - -unsigned char -pcc_inb(struct iop *p, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - unsigned long v; - - if (port & 1) - addr += 0x00400000; - v = *(volatile unsigned char *) addr; - return v; -} - -void -pcc_outb(struct iop *p, unsigned char value, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - - if (port & 1) - addr += 0x00400000; - *(volatile unsigned char *) addr = value; -} - -unsigned char -bad_inb(struct iop *p, unsigned long port) -{ - badio(inb, port); -} - -void -bad_outb(struct iop *p, unsigned char value, unsigned long port) -{ - badio(inw, port); -} - -#ifdef CONFIG_SMC91X -/* MSTLANEX01 LAN at 0xb400:0000 */ -static struct iop laniop = { - .start = 0x300, - .end = 0x30f, - .base = 0xb4000000, - .check = simple_check, - .inb = simple_inb, - .inw = simple_inw, - .outb = simple_outb, - .outw = simple_outw, -}; -#endif - -/* NE2000 pc card NIC */ -static struct iop neiop = { - .start = 0x280, - .end = 0x29f, - .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ - .check = simple_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; - -#ifdef CONFIG_IDE -/* CF in CF slot */ -static struct iop cfiop = { - .base = 0xb0600000, - .check = ide_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; -#endif - -static __inline__ struct iop * -port2iop(unsigned long port) -{ - if (0) ; -#if defined(CONFIG_SMC91X) - else if (laniop.check(&laniop, port)) - return &laniop; -#endif -#if defined(CONFIG_NE2000) - else if (neiop.check(&neiop, port)) - return &neiop; -#endif -#if defined(CONFIG_IDE) - else if (cfiop.check(&cfiop, port)) - return &cfiop; -#endif - else - return &neiop; /* fallback */ -} - -static inline void -delay(void) -{ - ctrl_inw(0xac000000); - ctrl_inw(0xac000000); -} - -unsigned char -sh7300se_inb(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inb) (p, port); -} - -unsigned char -sh7300se_inb_p(unsigned long port) -{ - unsigned char v = sh7300se_inb(port); - delay(); - return v; -} - -unsigned short -sh7300se_inw(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inw) (p, port); -} - -unsigned int -sh7300se_inl(unsigned long port) -{ - badio(inl, port); -} - -void -sh7300se_outb(unsigned char value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outb) (p, value, port); -} - -void -sh7300se_outb_p(unsigned char value, unsigned long port) -{ - sh7300se_outb(value, port); - delay(); -} - -void -sh7300se_outw(unsigned short value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outw) (p, value, port); -} - -void -sh7300se_outl(unsigned int value, unsigned long port) -{ - badio(outl, port); -} - -void -sh7300se_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inb) (p, port); -} - -void -sh7300se_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned short *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inw) (p, port); -} - -void -sh7300se_insl(unsigned long port, void *addr, unsigned long count) -{ - badio(insl, port); -} - -void -sh7300se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *a = (unsigned char *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outb) (p, *a++, port); -} - -void -sh7300se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned short *a = (unsigned short *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outw) (p, *a++, port); -} - -void -sh7300se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - badio(outsw, port); -} diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c deleted file mode 100644 index ad1034f98a2..00000000000 --- a/arch/sh/boards/se/7300/irq.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/irq.c - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * - * SH-Mobile SolutionEngine 7300 Support. - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/se7300.h> - -/* - * Initialize IRQ setting - */ -void __init -init_7300se_IRQ(void) -{ - ctrl_outw(0x0028, PA_EPLD_MODESET); /* mode set IRQ0,1 active low. */ - ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */ - ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */ - - /* PC_IRQ[0-3] -> IRQ0 (32) */ - make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ); - /* A_IRQ[0-3] -> IRQ1 (33) */ - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ); - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ -} diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c deleted file mode 100644 index 4d03bb7774b..00000000000 --- a/arch/sh/boards/se/7300/led.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/led.c - * - * Derived from linux/arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/se7300.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7300se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + 8); - -} - diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c deleted file mode 100644 index 6f082a722d4..00000000000 --- a/arch/sh/boards/se/7300/setup.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/setup.c - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * - * SH-Mobile SolutionEngine 7300 Support. - * - */ - -#include <linux/init.h> -#include <asm/machvec.h> -#include <asm/se7300.h> - -void heartbeat_7300se(void); -void init_7300se_IRQ(void); - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_7300se __initmv = { - .mv_name = "SolutionEngine 7300", - .mv_nr_irqs = 109, - .mv_inb = sh7300se_inb, - .mv_inw = sh7300se_inw, - .mv_inl = sh7300se_inl, - .mv_outb = sh7300se_outb, - .mv_outw = sh7300se_outw, - .mv_outl = sh7300se_outl, - - .mv_inb_p = sh7300se_inb_p, - .mv_inw_p = sh7300se_inw, - .mv_inl_p = sh7300se_inl, - .mv_outb_p = sh7300se_outb_p, - .mv_outw_p = sh7300se_outw, - .mv_outl_p = sh7300se_outl, - - .mv_insb = sh7300se_insb, - .mv_insw = sh7300se_insw, - .mv_insl = sh7300se_insl, - .mv_outsb = sh7300se_outsb, - .mv_outsw = sh7300se_outsw, - .mv_outsl = sh7300se_outsl, - - .mv_init_irq = init_7300se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7300se, -#endif -}; -ALIAS_MV(7300se) diff --git a/arch/sh/boards/se/73180/Makefile b/arch/sh/boards/se/73180/Makefile deleted file mode 100644 index 8f63886a0f3..00000000000 --- a/arch/sh/boards/se/73180/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the 73180 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/73180/io.c b/arch/sh/boards/se/73180/io.c deleted file mode 100644 index 72715575458..00000000000 --- a/arch/sh/boards/se/73180/io.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * arch/sh/boards/se/73180/io.c - * - * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> - * Based on arch/sh/boards/se/7300/io.c - * - * I/O routine for SH-Mobile3 73180 SolutionEngine. - * - */ - -#include <linux/kernel.h> -#include <asm/mach/se73180.h> -#include <asm/io.h> - -#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) - -struct iop { - unsigned long start, end; - unsigned long base; - struct iop *(*check) (struct iop * p, unsigned long port); - unsigned char (*inb) (struct iop * p, unsigned long port); - unsigned short (*inw) (struct iop * p, unsigned long port); - void (*outb) (struct iop * p, unsigned char value, unsigned long port); - void (*outw) (struct iop * p, unsigned short value, unsigned long port); -}; - -struct iop * -simple_check(struct iop *p, unsigned long port) -{ - if ((p->start <= port) && (port <= p->end)) - return p; - else - badio(check, port); -} - -struct iop * -ide_check(struct iop *p, unsigned long port) -{ - if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) - return p; - return NULL; -} - -unsigned char -simple_inb(struct iop *p, unsigned long port) -{ - return *(unsigned char *) (p->base + port); -} - -unsigned short -simple_inw(struct iop *p, unsigned long port) -{ - return *(unsigned short *) (p->base + port); -} - -void -simple_outb(struct iop *p, unsigned char value, unsigned long port) -{ - *(unsigned char *) (p->base + port) = value; -} - -void -simple_outw(struct iop *p, unsigned short value, unsigned long port) -{ - *(unsigned short *) (p->base + port) = value; -} - -unsigned char -pcc_inb(struct iop *p, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - unsigned long v; - - if (port & 1) - addr += 0x00400000; - v = *(volatile unsigned char *) addr; - return v; -} - -void -pcc_outb(struct iop *p, unsigned char value, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - - if (port & 1) - addr += 0x00400000; - *(volatile unsigned char *) addr = value; -} - -unsigned char -bad_inb(struct iop *p, unsigned long port) -{ - badio(inb, port); -} - -void -bad_outb(struct iop *p, unsigned char value, unsigned long port) -{ - badio(inw, port); -} - -#ifdef CONFIG_SMC91X -/* MSTLANEX01 LAN at 0xb400:0000 */ -static struct iop laniop = { - .start = 0x300, - .end = 0x30f, - .base = 0xb4000000, - .check = simple_check, - .inb = simple_inb, - .inw = simple_inw, - .outb = simple_outb, - .outw = simple_outw, -}; -#endif - -/* NE2000 pc card NIC */ -static struct iop neiop = { - .start = 0x280, - .end = 0x29f, - .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ - .check = simple_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; - -#ifdef CONFIG_IDE -/* CF in CF slot */ -static struct iop cfiop = { - .base = 0xb0600000, - .check = ide_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; -#endif - -static __inline__ struct iop * -port2iop(unsigned long port) -{ - if (0) ; -#if defined(CONFIG_SMC91X) - else if (laniop.check(&laniop, port)) - return &laniop; -#endif -#if defined(CONFIG_NE2000) - else if (neiop.check(&neiop, port)) - return &neiop; -#endif -#if defined(CONFIG_IDE) - else if (cfiop.check(&cfiop, port)) - return &cfiop; -#endif - else - return &neiop; /* fallback */ -} - -static inline void -delay(void) -{ - ctrl_inw(0xac000000); - ctrl_inw(0xac000000); -} - -unsigned char -sh73180se_inb(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inb) (p, port); -} - -unsigned char -sh73180se_inb_p(unsigned long port) -{ - unsigned char v = sh73180se_inb(port); - delay(); - return v; -} - -unsigned short -sh73180se_inw(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inw) (p, port); -} - -unsigned int -sh73180se_inl(unsigned long port) -{ - badio(inl, port); -} - -void -sh73180se_outb(unsigned char value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outb) (p, value, port); -} - -void -sh73180se_outb_p(unsigned char value, unsigned long port) -{ - sh73180se_outb(value, port); - delay(); -} - -void -sh73180se_outw(unsigned short value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outw) (p, value, port); -} - -void -sh73180se_outl(unsigned int value, unsigned long port) -{ - badio(outl, port); -} - -void -sh73180se_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inb) (p, port); -} - -void -sh73180se_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned short *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inw) (p, port); -} - -void -sh73180se_insl(unsigned long port, void *addr, unsigned long count) -{ - badio(insl, port); -} - -void -sh73180se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *a = (unsigned char *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outb) (p, *a++, port); -} - -void -sh73180se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned short *a = (unsigned short *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outw) (p, *a++, port); -} - -void -sh73180se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - badio(outsw, port); -} diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c deleted file mode 100644 index 2c62b8ea350..00000000000 --- a/arch/sh/boards/se/73180/irq.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * arch/sh/boards/se/73180/irq.c - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * Based on arch/sh/boards/se/7300/irq.c - * - * Modified for SH-Mobile SolutionEngine 73180 Support - * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/mach/se73180.h> - -static int -irq2intreq(int irq) -{ - if (irq == 10) - return 5; - return 7 - (irq - 32); -} - -static void -disable_intreq_irq(unsigned int irq) -{ - ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSK0); -} - -static void -enable_intreq_irq(unsigned int irq) -{ - ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSKCLR0); -} - -static void -mask_and_ack_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static unsigned int -startup_intreq_irq(unsigned int irq) -{ - enable_intreq_irq(irq); - return 0; -} - -static void -shutdown_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static void -end_intreq_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_intreq_irq(irq); -} - -static struct hw_interrupt_type intreq_irq_type = { - .typename = "intreq", - .startup = startup_intreq_irq, - .shutdown = shutdown_intreq_irq, - .enable = enable_intreq_irq, - .disable = disable_intreq_irq, - .ack = mask_and_ack_intreq_irq, - .end = end_intreq_irq -}; - -void -make_intreq_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &intreq_irq_type; - disable_intreq_irq(irq); -} - -int -shmse_irq_demux(int irq) -{ - if (irq == IRQ5_IRQ) - return 10; - return irq; -} - -/* - * Initialize IRQ setting - */ -void __init -init_73180se_IRQ(void) -{ - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - - ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ - ctrl_outw(0x2000, 0xb07fffec); /* mrshpc irq enable */ - ctrl_outl(3 << ((7 - 5) * 4), INTC_INTPRI0); /* irq5 pri=3 */ - ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1); /* low-level irq */ - make_intreq_irq(10); - - make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); - - ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); - - /* VIO interrupt */ - make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - - make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ -} diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c deleted file mode 100644 index 4b72e9a3ead..00000000000 --- a/arch/sh/boards/se/73180/led.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/sh/boards/se/73180/led.c - * - * Derived from arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/mach/se73180.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_73180se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c deleted file mode 100644 index b38ef50a160..00000000000 --- a/arch/sh/boards/se/73180/setup.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/sh/boards/se/73180/setup.c - * - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * Based on arch/sh/setup_shmse.c - * - * Modified for 73180 SolutionEngine - * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> - * - */ - -#include <linux/init.h> -#include <asm/machvec.h> -#include <asm/se73180.h> -#include <asm/irq.h> - -void heartbeat_73180se(void); -void init_73180se_IRQ(void); - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_73180se __initmv = { - .mv_name = "SolutionEngine 73180", - .mv_nr_irqs = 108, - .mv_inb = sh73180se_inb, - .mv_inw = sh73180se_inw, - .mv_inl = sh73180se_inl, - .mv_outb = sh73180se_outb, - .mv_outw = sh73180se_outw, - .mv_outl = sh73180se_outl, - - .mv_inb_p = sh73180se_inb_p, - .mv_inw_p = sh73180se_inw, - .mv_inl_p = sh73180se_inl, - .mv_outb_p = sh73180se_outb_p, - .mv_outw_p = sh73180se_outw, - .mv_outl_p = sh73180se_outl, - - .mv_insb = sh73180se_insb, - .mv_insw = sh73180se_insw, - .mv_insl = sh73180se_insl, - .mv_outsb = sh73180se_outsb, - .mv_outsw = sh73180se_outsw, - .mv_outsl = sh73180se_outsl, - - .mv_init_irq = init_73180se_IRQ, - .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_73180se, -#endif -}; -ALIAS_MV(73180se) diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile deleted file mode 100644 index 4291069c0b4..00000000000 --- a/arch/sh/boards/se/7343/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the 7343 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c deleted file mode 100644 index 646661a146a..00000000000 --- a/arch/sh/boards/se/7343/io.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * arch/sh/boards/se/7343/io.c - * - * I/O routine for SH-Mobile3AS 7343 SolutionEngine. - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <asm/io.h> -#include <asm/mach/se7343.h> - -#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) - -struct iop { - unsigned long start, end; - unsigned long base; - struct iop *(*check) (struct iop * p, unsigned long port); - unsigned char (*inb) (struct iop * p, unsigned long port); - unsigned short (*inw) (struct iop * p, unsigned long port); - void (*outb) (struct iop * p, unsigned char value, unsigned long port); - void (*outw) (struct iop * p, unsigned short value, unsigned long port); -}; - -struct iop * -simple_check(struct iop *p, unsigned long port) -{ - static int count; - - if (count < 100) - count++; - - port &= 0xFFFF; - - if ((p->start <= port) && (port <= p->end)) - return p; - else - badio(check, port); -} - -struct iop * -ide_check(struct iop *p, unsigned long port) -{ - if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) - return p; - return NULL; -} - -unsigned char -simple_inb(struct iop *p, unsigned long port) -{ - return *(unsigned char *) (p->base + port); -} - -unsigned short -simple_inw(struct iop *p, unsigned long port) -{ - return *(unsigned short *) (p->base + port); -} - -void -simple_outb(struct iop *p, unsigned char value, unsigned long port) -{ - *(unsigned char *) (p->base + port) = value; -} - -void -simple_outw(struct iop *p, unsigned short value, unsigned long port) -{ - *(unsigned short *) (p->base + port) = value; -} - -unsigned char -pcc_inb(struct iop *p, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - unsigned long v; - - if (port & 1) - addr += 0x00400000; - v = *(volatile unsigned char *) addr; - return v; -} - -void -pcc_outb(struct iop *p, unsigned char value, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - - if (port & 1) - addr += 0x00400000; - *(volatile unsigned char *) addr = value; -} - -unsigned char -bad_inb(struct iop *p, unsigned long port) -{ - badio(inb, port); -} - -void -bad_outb(struct iop *p, unsigned char value, unsigned long port) -{ - badio(inw, port); -} - -#ifdef CONFIG_SMC91X -/* MSTLANEX01 LAN at 0xb400:0000 */ -static struct iop laniop = { - .start = 0x00, - .end = 0x0F, - .base = 0x04000000, - .check = simple_check, - .inb = simple_inb, - .inw = simple_inw, - .outb = simple_outb, - .outw = simple_outw, -}; -#endif - -#ifdef CONFIG_NE2000 -/* NE2000 pc card NIC */ -static struct iop neiop = { - .start = 0x280, - .end = 0x29f, - .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ - .check = simple_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; -#endif - -#ifdef CONFIG_IDE -/* CF in CF slot */ -static struct iop cfiop = { - .base = 0xb0600000, - .check = ide_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; -#endif - -static __inline__ struct iop * -port2iop(unsigned long port) -{ - if (0) ; -#if defined(CONFIG_SMC91X) - else if (laniop.check(&laniop, port)) - return &laniop; -#endif -#if defined(CONFIG_NE2000) - else if (neiop.check(&neiop, port)) - return &neiop; -#endif -#if defined(CONFIG_IDE) - else if (cfiop.check(&cfiop, port)) - return &cfiop; -#endif - else - return NULL; -} - -static inline void -delay(void) -{ - ctrl_inw(0xac000000); - ctrl_inw(0xac000000); -} - -unsigned char -sh7343se_inb(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inb) (p, port); -} - -unsigned char -sh7343se_inb_p(unsigned long port) -{ - unsigned char v = sh7343se_inb(port); - delay(); - return v; -} - -unsigned short -sh7343se_inw(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inw) (p, port); -} - -unsigned int -sh7343se_inl(unsigned long port) -{ - badio(inl, port); -} - -void -sh7343se_outb(unsigned char value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outb) (p, value, port); -} - -void -sh7343se_outb_p(unsigned char value, unsigned long port) -{ - sh7343se_outb(value, port); - delay(); -} - -void -sh7343se_outw(unsigned short value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outw) (p, value, port); -} - -void -sh7343se_outl(unsigned int value, unsigned long port) -{ - badio(outl, port); -} - -void -sh7343se_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inb) (p, port); -} - -void -sh7343se_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned short *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inw) (p, port); -} - -void -sh7343se_insl(unsigned long port, void *addr, unsigned long count) -{ - badio(insl, port); -} - -void -sh7343se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *a = (unsigned char *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outb) (p, *a++, port); -} - -void -sh7343se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned short *a = (unsigned short *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outw) (p, *a++, port); -} - -void -sh7343se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - badio(outsw, port); -} diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c deleted file mode 100644 index b41e3d4ea37..00000000000 --- a/arch/sh/boards/se/7343/irq.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * arch/sh/boards/se/7343/irq.c - * - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/mach/se7343.h> - -static void -disable_intreq_irq(unsigned int irq) -{ - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val |= 1 << bit; - ctrl_outw(val, PA_CPLD_IMSK); -} - -static void -enable_intreq_irq(unsigned int irq) -{ - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val &= ~(1 << bit); - ctrl_outw(val, PA_CPLD_IMSK); -} - -static void -mask_and_ack_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static unsigned int -startup_intreq_irq(unsigned int irq) -{ - enable_intreq_irq(irq); - return 0; -} - -static void -shutdown_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static void -end_intreq_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_intreq_irq(irq); -} - -static struct hw_interrupt_type intreq_irq_type = { - .typename = "FPGA-IRQ", - .startup = startup_intreq_irq, - .shutdown = shutdown_intreq_irq, - .enable = enable_intreq_irq, - .disable = disable_intreq_irq, - .ack = mask_and_ack_intreq_irq, - .end = end_intreq_irq -}; - -static void -make_intreq_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].handler = &intreq_irq_type; - disable_intreq_irq(irq); -} - -int -shmse_irq_demux(int irq) -{ - int bit; - volatile u16 val; - - if (irq == IRQ5_IRQ) { - /* Read status Register */ - val = ctrl_inw(PA_CPLD_ST); - bit = ffs(val); - if (bit != 0) - return OFFCHIP_IRQ_BASE + bit - 1; - } - return irq; -} - -/* IRQ5 is multiplexed between the following sources: - * 1. PC Card socket - * 2. Extension slot - * 3. USB Controller - * 4. Serial Controller - * - * We configure IRQ5 as a cascade IRQ. - */ -static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade", - NULL, NULL}; - -/* - * Initialize IRQ setting - */ -void __init -init_7343se_IRQ(void) -{ - /* Setup Multiplexed interrupts */ - ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active - * low. - */ - /* Mask all CPLD controller interrupts */ - ctrl_outw(0x0fff, PA_CPLD_IMSK); - - /* PC Card interrupts */ - make_intreq_irq(PC_IRQ0); - make_intreq_irq(PC_IRQ1); - make_intreq_irq(PC_IRQ2); - make_intreq_irq(PC_IRQ3); - - /* Extension Slot Interrupts */ - make_intreq_irq(EXT_IRQ0); - make_intreq_irq(EXT_IRQ1); - make_intreq_irq(EXT_IRQ2); - make_intreq_irq(EXT_IRQ3); - - /* USB Controller interrupts */ - make_intreq_irq(USB_IRQ0); - make_intreq_irq(USB_IRQ1); - - /* Serial Controller interrupts */ - make_intreq_irq(UART_IRQ0); - make_intreq_irq(UART_IRQ1); - - /* Setup all external interrupts to be active low */ - ctrl_outw(0xaaaa, INTC_ICR1); - - make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY); - setup_irq(IRQ5_IRQ, &irq5); - /* Set port control to use IRQ5 */ - *(u16 *)0xA4050108 &= ~0xc; - - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); - - ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - - make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - - /* I2C block */ - make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - - make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); - make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, - IIC1_PRIORITY); - make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, - IIC1_PRIORITY); - make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); - - /* SIOF */ - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - - /* SIU */ - make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); - - /* VIO interrupt */ - make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - - /*MFI interrupt*/ - - make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY); - - /* LCD controller */ - make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ -} diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c deleted file mode 100644 index 6a439cf83e4..00000000000 --- a/arch/sh/boards/se/7343/led.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/sh/boards/se/7343/led.c - * - */ - -#include <linux/config.h> -#include <linux/sched.h> -#include <asm/mach/se7343.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7343se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c deleted file mode 100644 index 787322291fb..00000000000 --- a/arch/sh/boards/se/7343/setup.c +++ /dev/null @@ -1,84 +0,0 @@ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/machvec.h> -#include <asm/mach/se7343.h> -#include <asm/irq.h> - -void heartbeat_7343se(void); -void init_7343se_IRQ(void); - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x10000000, - .end = 0x1000000F, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* - * shared with other devices via externel - * interrupt controller in FPGA... - */ - .start = EXT_IRQ2, - .end = EXT_IRQ2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *smc91x_platform_devices[] __initdata = { - &smc91x_device, -}; - -static int __init sh7343se_devices_setup(void) -{ - return platform_add_devices(smc91x_platform_devices, - ARRAY_SIZE(smc91x_platform_devices)); -} - -static void __init sh7343se_setup(char **cmdline_p) -{ - device_initcall(sh7343se_devices_setup); -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_7343se __initmv = { - .mv_name = "SolutionEngine 7343", - .mv_setup = sh7343se_setup, - .mv_nr_irqs = 108, - .mv_inb = sh7343se_inb, - .mv_inw = sh7343se_inw, - .mv_inl = sh7343se_inl, - .mv_outb = sh7343se_outb, - .mv_outw = sh7343se_outw, - .mv_outl = sh7343se_outl, - - .mv_inb_p = sh7343se_inb_p, - .mv_inw_p = sh7343se_inw, - .mv_inl_p = sh7343se_inl, - .mv_outb_p = sh7343se_outb_p, - .mv_outw_p = sh7343se_outw, - .mv_outl_p = sh7343se_outl, - - .mv_insb = sh7343se_insb, - .mv_insw = sh7343se_insw, - .mv_insl = sh7343se_insl, - .mv_outsb = sh7343se_outsb, - .mv_outsw = sh7343se_outsw, - .mv_outsl = sh7343se_outsl, - - .mv_init_irq = init_7343se_IRQ, - .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7343se, -#endif -}; -ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile deleted file mode 100644 index 9a5035f80ec..00000000000 --- a/arch/sh/boards/se/770x/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the 770x SolutionEngine specific parts of the kernel -# - -obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c deleted file mode 100644 index 9941949331a..00000000000 --- a/arch/sh/boards/se/770x/io.c +++ /dev/null @@ -1,185 +0,0 @@ -/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $ - * - * linux/arch/sh/kernel/io_se.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * I/O routine for Hitachi SolutionEngine. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <asm/se.h> - -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; - -/* MS7750 requires special versions of in*, out* routines, since - PC-like io ports are located at upper half byte of 16-bit word which - can be accessed only with 16-bit wide. */ - -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x1000) - return (volatile __u16 *) (PA_83902 + (port << 1)); - else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1)); - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -} - -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -unsigned char se_inb(unsigned long port) -{ - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - return (*port2adr(port) >> 8); - else - return (*port2adr(port))&0xff; -} - -unsigned char se_inb_p(unsigned long port) -{ - unsigned long v; - - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - v = (*port2adr(port) >> 8); - else - v = (*port2adr(port))&0xff; - ctrl_delay(); - return v; -} - -unsigned short se_inw(unsigned long port) -{ - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int se_inl(unsigned long port) -{ - maybebadio(port); - return 0; -} - -void se_outb(unsigned char value, unsigned long port) -{ - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) - *(port2adr(port)) = value << 8; - else - *(port2adr(port)) = value; -} - -void se_outb_p(unsigned char value, unsigned long port) -{ - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) - *(port2adr(port)) = value << 8; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void se_outw(unsigned short value, unsigned long port) -{ - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) - *port2adr(port) = value; - else - maybebadio(port); -} - -void se_outl(unsigned int value, unsigned long port) -{ - maybebadio(port); -} - -void se_insb(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u8 *ap = addr; - - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - while (count--) - *ap++ = *bp; - } else if (shifted_port(port)) { - while (count--) - *ap++ = *p >> 8; - } else { - while (count--) - *ap++ = *p; - } -} - -void se_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u16 *ap = addr; - while (count--) - *ap++ = *p; -} - -void se_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u8 *ap = addr; - - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); - while (count--) - *bp = *ap++; - } else if (shifted_port(port)) { - while (count--) - *p = *ap++ << 8; - } else { - while (count--) - *p = *ap++; - } -} - -void se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u16 *ap = addr; - while (count--) - *p = *ap++; -} - -void se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c deleted file mode 100644 index cff6700bbaf..00000000000 --- a/arch/sh/boards/se/770x/irq.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * linux/arch/sh/boards/se/770x/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine Support. - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/se.h> - -/* - * Initialize IRQ setting - */ -void __init init_se_IRQ(void) -{ - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 0 - * 4: serial 1 - * 5: printer - * 6: floppy - * 8: rtc - * 12: mouse - * 14: ide0 - */ -#if defined(CONFIG_CPU_SUBTYPE_SH7705) - /* Disable all interrupts */ - ctrl_outw(0, BCR_ILCRA); - ctrl_outw(0, BCR_ILCRB); - ctrl_outw(0, BCR_ILCRC); - ctrl_outw(0, BCR_ILCRD); - ctrl_outw(0, BCR_ILCRE); - ctrl_outw(0, BCR_ILCRF); - ctrl_outw(0, BCR_ILCRG); - /* This is default value */ - make_ipr_irq(0xf-0x2, BCR_ILCRA, 2, 0x2); - make_ipr_irq(0xf-0xa, BCR_ILCRA, 1, 0xa); - make_ipr_irq(0xf-0x5, BCR_ILCRB, 0, 0x5); - make_ipr_irq(0xf-0x8, BCR_ILCRC, 1, 0x8); - make_ipr_irq(0xf-0xc, BCR_ILCRC, 0, 0xc); - make_ipr_irq(0xf-0xe, BCR_ILCRD, 3, 0xe); - make_ipr_irq(0xf-0x3, BCR_ILCRD, 1, 0x3); /* LAN */ - make_ipr_irq(0xf-0xd, BCR_ILCRE, 2, 0xd); - make_ipr_irq(0xf-0x9, BCR_ILCRE, 1, 0x9); - make_ipr_irq(0xf-0x1, BCR_ILCRE, 0, 0x1); - make_ipr_irq(0xf-0xf, BCR_ILCRF, 3, 0xf); - make_ipr_irq(0xf-0xb, BCR_ILCRF, 1, 0xb); - make_ipr_irq(0xf-0x7, BCR_ILCRG, 3, 0x7); - make_ipr_irq(0xf-0x6, BCR_ILCRG, 2, 0x6); - make_ipr_irq(0xf-0x4, BCR_ILCRG, 1, 0x4); -#else - make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); - make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); - make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); - make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); - make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); - make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); - make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); - make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); - - make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ - - make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ - make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ - make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ - make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ - - /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ - /* NOTE: #2 and #13 are not used on PC */ - make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ - make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ -#endif -} diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c deleted file mode 100644 index daf7b1ee786..00000000000 --- a/arch/sh/boards/se/770x/led.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/sh/kernel/led_se.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/se.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<(bit+8); - -} diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c deleted file mode 100644 index f3f82b7c821..00000000000 --- a/arch/sh/boards/se/770x/setup.c +++ /dev/null @@ -1,117 +0,0 @@ -/* $Id: setup.c,v 1.1.2.4 2002/03/02 21:57:07 lethal Exp $ - * - * linux/arch/sh/boards/se/770x/setup.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine Support. - * - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/hdreg.h> -#include <linux/ide.h> -#include <asm/io.h> -#include <asm/se.h> -#include <asm/smc37c93x.h> -#include <asm/machvec.h> - -void heartbeat_se(void); -void init_se_IRQ(void); - -/* - * Configure the Super I/O chip - */ -static void __init smsc_config(int index, int data) -{ - outb_p(index, INDEX_PORT); - outb_p(data, DATA_PORT); -} - -/* XXX: Another candidate for a more generic cchip machine vector */ -static void __init smsc_setup(char **cmdline_p) -{ - outb_p(CONFIG_ENTER, CONFIG_PORT); - outb_p(CONFIG_ENTER, CONFIG_PORT); - - /* FDC */ - smsc_config(CURRENT_LDN_INDEX, LDN_FDC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - - /* AUXIO (GPIO): to use IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); - smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ - smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ - - /* COM1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x03); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ - - /* COM2 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM2); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x02); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ - - /* RTC */ - smsc_config(CURRENT_LDN_INDEX, LDN_RTC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ - - /* XXX: PARPORT, KBD, and MOUSE will come here... */ - outb_p(CONFIG_EXIT, CONFIG_PORT); -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_se __initmv = { - .mv_name = "SolutionEngine", - .mv_setup = smsc_setup, -#if defined(CONFIG_CPU_SH4) - .mv_nr_irqs = 48, -#elif defined(CONFIG_CPU_SUBTYPE_SH7708) - .mv_nr_irqs = 32, -#elif defined(CONFIG_CPU_SUBTYPE_SH7709) - .mv_nr_irqs = 61, -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) - .mv_nr_irqs = 86, -#endif - - .mv_inb = se_inb, - .mv_inw = se_inw, - .mv_inl = se_inl, - .mv_outb = se_outb, - .mv_outw = se_outw, - .mv_outl = se_outl, - - .mv_inb_p = se_inb_p, - .mv_inw_p = se_inw, - .mv_inl_p = se_inl, - .mv_outb_p = se_outb_p, - .mv_outw_p = se_outw, - .mv_outl_p = se_outl, - - .mv_insb = se_insb, - .mv_insw = se_insw, - .mv_insl = se_insl, - .mv_outsb = se_outsb, - .mv_outsw = se_outsw, - .mv_outsl = se_outsl, - - .mv_init_irq = init_se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif -}; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile deleted file mode 100644 index 188900c4832..00000000000 --- a/arch/sh/boards/se/7751/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the 7751 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c deleted file mode 100644 index e8d846cec89..00000000000 --- a/arch/sh/boards/se/7751/io.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Hitachi 7751 SolutionEngine. - * - * Initial version only to support LAN access; some - * placeholder code from io_se.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <asm/se7751.h> -#include <asm/addrspace.h> - -static inline volatile u16 *port2adr(unsigned int port) -{ - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - maybebadio((unsigned long)port); - return (volatile __u16*)port; -} - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char sh7751se_inb(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned char *)pci_ioaddr(port); - else - return (*port2adr(port)) & 0xff; -} - -unsigned char sh7751se_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); - else - v = (*port2adr(port)) & 0xff; - ctrl_delay(); - return v; -} - -unsigned short sh7751se_inw(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned short *)pci_ioaddr(port); - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int sh7751se_inl(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned int *)pci_ioaddr(port); - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -void sh7751se_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; - else - *(port2adr(port)) = value; -} - -void sh7751se_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void sh7751se_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned short *)pci_ioaddr(port)) = value; - else if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void sh7751se_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned long*)pci_ioaddr(port)) = value; - else - maybebadio(port); -} - -void sh7751se_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c deleted file mode 100644 index c607b0a4847..00000000000 --- a/arch/sh/boards/se/7751/irq.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/arch/sh/boards/se/7751/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine Support. - * - * Modified for 7751 Solution Engine by - * Ian da Silva and Jeremy Siegel, 2001. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/se7751.h> - -/* - * Initialize IRQ setting - */ -void __init init_7751se_IRQ(void) -{ - - /* Leave old Solution Engine code in for reference. */ -#if defined(CONFIG_SH_SOLUTION_ENGINE) - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 0 - * 4: serial 1 - * 5: printer - * 6: floppy - * 8: rtc - * 12: mouse - * 14: ide0 - */ - make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); - make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); - make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); - make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); - make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); - make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); - make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); - make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); - - make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ - - make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ - make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ - make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ - make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ - - /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ - /* NOTE: #2 and #13 are not used on PC */ - make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ - make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ - -#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE) - - make_ipr_irq(13, BCR_ILCRD, 3, 2); - - /* Add additional calls to make_ipr_irq() as drivers are added - * and tested. - */ -#endif - -} diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c deleted file mode 100644 index ff0355dea81..00000000000 --- a/arch/sh/boards/se/7751/led.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/arch/sh/kernel/led_se.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ -#include <linux/sched.h> -#include <asm/se7751.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7751se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<(bit+8); - -} diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/se/7751/pci.c deleted file mode 100644 index 3ee03014dea..00000000000 --- a/arch/sh/boards/se/7751/pci.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/arch/sh/kernel/pci-7751se.c - * - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01) - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> - -#include <asm/io.h> -#include "../../../drivers/pci/pci-sh7751.h" - -#define PCIMCR_MRSET_OFF 0xBFFFFFFF -#define PCIMCR_RFSH_OFF 0xFFFFFFFB - -/* - * Only long word accesses of the PCIC's internal local registers and the - * configuration registers from the CPU is supported. - */ -#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) -#define PCIC_READ(x) readl(PCI_REG(x)) - -/* - * Description: This function sets up and initializes the pcic, sets - * up the BARS, maps the DRAM into the address space etc, etc. - */ -int __init pcibios_init_platform(void) -{ - unsigned long bcr1, wcr1, wcr2, wcr3, mcr; - unsigned short bcr2; - - /* - * Initialize the slave bus controller on the pcic. The values used - * here should not be hardcoded, but they should be taken from the bsc - * on the processor, to make this function as generic as possible. - * (i.e. Another sbc may usr different SDRAM timing settings -- in order - * for the pcic to work, its settings need to be exactly the same.) - */ - bcr1 = (*(volatile unsigned long*)(SH7751_BCR1)); - bcr2 = (*(volatile unsigned short*)(SH7751_BCR2)); - wcr1 = (*(volatile unsigned long*)(SH7751_WCR1)); - wcr2 = (*(volatile unsigned long*)(SH7751_WCR2)); - wcr3 = (*(volatile unsigned long*)(SH7751_WCR3)); - mcr = (*(volatile unsigned long*)(SH7751_MCR)); - - bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ - (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1; - - bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ - PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ - PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ - PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ - PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ - mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ - - - /* Enable all interrupts, so we know what to fix */ - PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); - PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); - - /* Set up standard PCI config registers */ - PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */ - PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ - PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ - PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ - PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ - PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ - PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ - PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ - PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ - PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ - - /* Now turn it on... */ - PCIC_WRITE(SH7751_PCICR, 0xa5000001); - - /* - * Set PCIMBR and PCIIOBR here, assuming a single window - * (16M MEM, 256K IO) is enough. If a larger space is - * needed, the readx/writex and inx/outx functions will - * have to do more (e.g. setting registers for each call). - */ - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use BUG_ON to - * catch erroneous assumption. - */ - BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); - - PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); - - /* Set IOBR for window containing area specified in pci.h */ - PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); - - /* All done, may as well say so... */ - printk("SH7751 PCI: Finished initialization of the PCI controller\n"); - - return 1; -} - -int __init pcibios_map_platform_irq(u8 slot, u8 pin) -{ - switch (slot) { - case 0: return 13; - case 1: return 13; /* AMD Ethernet controller */ - case 2: return -1; - case 3: return -1; - case 4: return -1; - default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return -1; - } -} - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c deleted file mode 100644 index 73e826310ba..00000000000 --- a/arch/sh/boards/se/7751/setup.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * linux/arch/sh/kernel/setup_7751se.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine Support. - * - * Modified for 7751 Solution Engine by - * Ian da Silva and Jeremy Siegel, 2001. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/ide.h> -#include <asm/io.h> -#include <asm/se7751.h> - -void heartbeat_7751se(void); -void init_7751se_IRQ(void); - -#ifdef CONFIG_SH_KGDB -#include <asm/kgdb.h> -static int kgdb_uart_setup(void); -static struct kgdb_sermap kgdb_uart_sermap = -{ "ttyS", 0, kgdb_uart_setup, NULL }; -#endif - -/* - * Initialize the board - */ -static void __init sh7751se_setup(char **cmdline_p) -{ - /* Call init_smsc() replacement to set up SuperIO. */ - /* XXX: RTC setting comes here */ -#ifdef CONFIG_SH_KGDB - kgdb_register_sermap(&kgdb_uart_sermap); -#endif -} - -/********************************************************************* - * Currently a hack (e.g. does not interact well w/serial.c, lots of * - * hardcoded stuff) but may be useful if SCI/F needs debugging. * - * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and * - * arch/i386/lib/kgdb_serial.c). * - *********************************************************************/ - -#ifdef CONFIG_SH_KGDB -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> - -#define COM1_PORT 0x3f8 /* Base I/O address */ -#define COM1_IRQ 4 /* IRQ not used yet */ -#define COM2_PORT 0x2f8 /* Base I/O address */ -#define COM2_IRQ 3 /* IRQ not used yet */ - -#define SB_CLOCK 1843200 /* Serial baud clock */ -#define SB_BASE (SB_CLOCK/16) -#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS - -struct uart_port { - int base; -}; -#define UART_NPORTS 2 -struct uart_port uart_ports[] = { - { COM1_PORT }, - { COM2_PORT }, -}; -struct uart_port *kgdb_uart_port; - -#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg) -#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg) - -/* Basic read/write functions for the UART */ -#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE) -static int kgdb_uart_getchar(void) -{ - int lsr; - int c = -1; - - while (c == -1) { - lsr = UART_IN(UART_LSR); - if (lsr & UART_LSR_DR) - c = UART_IN(UART_RX); - if ((lsr & UART_LSR_RXCERR)) - c = -1; - } - return c; -} - -static void kgdb_uart_putchar(int c) -{ - while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0) - ; - UART_OUT(UART_TX, c); -} - -/* - * Initialize UART to configured/requested values. - * (But we don't interrupts yet, or interact w/serial.c) - */ -static int kgdb_uart_setup(void) -{ - int port; - int lcr = 0; - int bdiv = 0; - - if (kgdb_portnum >= UART_NPORTS) { - KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum); - return -1; - } - - kgdb_uart_port = &uart_ports[kgdb_portnum]; - - /* Init sequence from gdb_hook_interrupt */ - UART_IN(UART_RX); - UART_OUT(UART_IER, 0); - - UART_IN(UART_RX); /* Serial driver comments say */ - UART_IN(UART_IIR); /* this clears interrupt regs */ - UART_IN(UART_MSR); - - /* Figure basic LCR values */ - switch (kgdb_bits) { - case '7': - lcr |= UART_LCR_WLEN7; - break; - default: case '8': - lcr |= UART_LCR_WLEN8; - break; - } - switch (kgdb_parity) { - case 'O': - lcr |= UART_LCR_PARITY; - break; - case 'E': - lcr |= (UART_LCR_PARITY | UART_LCR_EPAR); - break; - default: break; - } - - /* Figure the baud rate divisor */ - bdiv = (SB_BASE/kgdb_baud); - - /* Set the baud rate and LCR values */ - UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB)); - UART_OUT(UART_DLL, (bdiv & 0xff)); - UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff)); - UART_OUT(UART_LCR, lcr); - - /* Set the MCR */ - UART_OUT(UART_MCR, SB_MCR); - - /* Turn off FIFOs for now */ - UART_OUT(UART_FCR, 0); - - /* Setup complete: initialize function pointers */ - kgdb_getchar = kgdb_uart_getchar; - kgdb_putchar = kgdb_uart_putchar; - - return 0; -} -#endif /* CONFIG_SH_KGDB */ - - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_7751se __initmv = { - .mv_name = "7751 SolutionEngine", - .mv_setup = sh7751se_setup, - .mv_nr_irqs = 72, - - .mv_inb = sh7751se_inb, - .mv_inw = sh7751se_inw, - .mv_inl = sh7751se_inl, - .mv_outb = sh7751se_outb, - .mv_outw = sh7751se_outw, - .mv_outl = sh7751se_outl, - - .mv_inb_p = sh7751se_inb_p, - .mv_inw_p = sh7751se_inw, - .mv_inl_p = sh7751se_inl, - .mv_outb_p = sh7751se_outb_p, - .mv_outw_p = sh7751se_outw, - .mv_outl_p = sh7751se_outl, - - .mv_insl = sh7751se_insl, - .mv_outsl = sh7751se_outsl, - - .mv_init_irq = init_7751se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7751se, -#endif -}; -ALIAS_MV(7751se) |