diff options
Diffstat (limited to 'arch/powerpc/platforms/powermac')
20 files changed, 781 insertions, 2109 deletions
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig index 055990ca8ce..1afd10f6785 100644 --- a/arch/powerpc/platforms/powermac/Kconfig +++ b/arch/powerpc/platforms/powermac/Kconfig @@ -1,6 +1,6 @@ config PPC_PMAC bool "Apple PowerMac based machines" - depends on PPC_MULTIPLATFORM + depends on PPC_BOOK3S select MPIC select PCI select PPC_INDIRECT_PCI if PPC32 @@ -18,4 +18,13 @@ config PPC_PMAC64 select PPC_970_NAP default y - +config PPC_PMAC32_PSURGE + bool "Support for powersurge upgrade cards" if EXPERT + depends on SMP && PPC32 && PPC_PMAC + select PPC_SMP_MUXED_IPI + default y + help + The powersurge cpu boards can be used in the generation + of powermacs that have a socket for an upgradeable cpu card, + including the 7500, 8500, 9500, 9600. Support exists for + both dual and quad socket upgrade cards. diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 78093d7f97a..52c6ce1cc98 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -1,14 +1,19 @@ CFLAGS_bootx_init.o += -fPIC +ifdef CONFIG_FUNCTION_TRACER +# Do not trace early boot code +CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog +endif + obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ - pfunc_base.o + pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o -obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o -obj-$(CONFIG_NVRAM) += nvram.o +# CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really +# need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really +# CONFIG_NVRAM=y +obj-$(CONFIG_NVRAM:m=y) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o obj-$(CONFIG_PPC32) += bootx_init.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c index d679964ae2a..a00096b1c71 100644 --- a/arch/powerpc/platforms/powermac/backlight.c +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -12,7 +12,8 @@ #include <linux/backlight.h> #include <linux/adb.h> #include <linux/pmu.h> -#include <asm/atomic.h> +#include <linux/atomic.h> +#include <linux/export.h> #include <asm/prom.h> #include <asm/backlight.h> diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index cf660916ae0..3e91ef53811 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -12,13 +12,14 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <asm/sections.h> #include <asm/prom.h> #include <asm/page.h> #include <asm/bootx.h> #include <asm/btext.h> #include <asm/io.h> +#include <asm/setup.h> #undef DEBUG #define SET_BOOT_BAT @@ -539,7 +540,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) if (model && (strcmp(model, "iMac,1") == 0 || strcmp(model, "PowerMac1,1") == 0)) { - bootx_printf("iMac,1 detected, shutting down USB \n"); + bootx_printf("iMac,1 detected, shutting down USB\n"); out_le32((unsigned __iomem *)0x80880008, 1); /* XXX */ } } @@ -554,7 +555,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) } else space = bi->totalParamsSize; - bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space); + bootx_printf("Total space used by parameters & ramdisk: 0x%x\n", space); /* New BootX will have flushed all TLBs and enters kernel with * MMU switched OFF, so this should not be useful anymore. diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c deleted file mode 100644 index 792d3ce8112..00000000000 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ /dev/null @@ -1,723 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * TODO: Need a big cleanup here. Basically, we need to have different - * cpufreq_driver structures for the different type of HW instead of the - * current mess. We also need to better deal with the detection of the - * type of machine. - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/sysdev.h> -#include <linux/hardirq.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/pmac_feature.h> -#include <asm/mmu_context.h> -#include <asm/sections.h> -#include <asm/cputable.h> -#include <asm/time.h> -#include <asm/system.h> -#include <asm/mpic.h> -#include <asm/keylargo.h> - -/* WARNING !!! This will cause calibrate_delay() to be called, - * but this is an __init function ! So you MUST go edit - * init/main.c to make it non-init before enabling DEBUG_FREQ - */ -#undef DEBUG_FREQ - -/* - * There is a problem with the core cpufreq code on SMP kernels, - * it won't recalculate the Bogomips properly - */ -#ifdef CONFIG_SMP -#warning "WARNING, CPUFREQ not recommended on SMP kernels" -#endif - -extern void low_choose_7447a_dfs(int dfs); -extern void low_choose_750fx_pll(int pll); -extern void low_sleep_handler(void); - -/* - * Currently, PowerMac cpufreq supports only high & low frequencies - * that are set by the firmware - */ -static unsigned int low_freq; -static unsigned int hi_freq; -static unsigned int cur_freq; -static unsigned int sleep_freq; - -/* - * Different models uses different mechanisms to switch the frequency - */ -static int (*set_speed_proc)(int low_speed); -static unsigned int (*get_speed_proc)(void); - -/* - * Some definitions used by the various speedprocs - */ -static u32 voltage_gpio; -static u32 frequency_gpio; -static u32 slew_done_gpio; -static int no_schedule; -static int has_cpu_l2lve; -static int is_pmu_based; - -/* There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table pmac_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* pmac_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static inline void local_delay(unsigned long ms) -{ - if (no_schedule) - mdelay(ms); - else - msleep(ms); -} - -#ifdef DEBUG_FREQ -static inline void debug_calc_bogomips(void) -{ - /* This will cause a recalc of bogomips and display the - * result. We backup/restore the value to avoid affecting the - * core cpufreq framework's own calculation. - */ - unsigned long save_lpj = loops_per_jiffy; - calibrate_delay(); - loops_per_jiffy = save_lpj; -} -#endif /* DEBUG_FREQ */ - -/* Switch CPU speed under 750FX CPU control - */ -static int cpu_750fx_cpu_speed(int low_speed) -{ - u32 hid2; - - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(10); - - /* tweak L2 for high voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 &= ~0x2000; - mtspr(SPRN_HID2, hid2); - } - } -#ifdef CONFIG_6xx - low_choose_750fx_pll(low_speed); -#endif - if (low_speed == 1) { - /* tweak L2 for low voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 |= 0x2000; - mtspr(SPRN_HID2, hid2); - } - - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(10); - } - - return 0; -} - -static unsigned int cpu_750fx_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_PS) - return low_freq; - else - return hi_freq; -} - -/* Switch CPU speed using DFS */ -static int dfs_set_cpu_speed(int low_speed) -{ - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(1); - } - - /* set frequency */ -#ifdef CONFIG_6xx - low_choose_7447a_dfs(low_speed); -#endif - udelay(100); - - if (low_speed == 1) { - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(1); - } - - return 0; -} - -static unsigned int dfs_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_DFS) - return low_freq; - else - return hi_freq; -} - - -/* Switch CPU speed using slewing GPIOs - */ -static int gpios_set_cpu_speed(int low_speed) -{ - int gpio, timeout = 0; - - /* If ramping up, set voltage first */ - if (low_speed == 0) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - - /* Set frequency */ - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - if (low_speed == ((gpio & 0x01) == 0)) - goto skip; - - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, - low_speed ? 0x04 : 0x05); - udelay(200); - do { - if (++timeout > 100) - break; - local_delay(1); - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); - } while((gpio & 0x02) == 0); - skip: - /* If ramping down, set voltage last */ - if (low_speed == 1) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - return 0; -} - -/* Switch CPU speed under PMU control - */ -static int pmu_set_cpu_speed(int low_speed) -{ - struct adb_request req; - unsigned long save_l2cr; - unsigned long save_l3cr; - unsigned int pic_prio; - unsigned long flags; - - preempt_disable(); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); -#endif - pmu_suspend(); - - /* Disable all interrupt sources on openpic */ - pic_prio = mpic_cpu_get_priority(); - mpic_cpu_set_priority(0xf); - - /* Make sure the decrementer won't interrupt us */ - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - /* Make sure any pending DEC interrupt occurring while we did - * the above didn't re-enable the DEC */ - mb(); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* We can now disable MSR_EE */ - local_irq_save(flags); - - /* Giveup the FPU & vec */ - enable_kernel_fp(); - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - enable_kernel_altivec(); -#endif /* CONFIG_ALTIVEC */ - - /* Save & disable L2 and L3 caches */ - save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ - save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ - - /* Send the new speed command. My assumption is that this command - * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep - */ - pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); - while (!req.complete) - pmu_poll(); - - /* Prepare the northbridge for the speed transition */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); - - /* Call low level code to backup CPU state and recover from - * hardware reset - */ - low_sleep_handler(); - - /* Restore the northbridge */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); - - /* Restore L2 cache */ - if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) - _set_L2CR(save_l2cr); - /* Restore L3 cache */ - if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) - _set_L3CR(save_l3cr); - - /* Restore userland MMU context */ - set_context(current->active_mm->context.id, current->active_mm->pgd); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); -#endif - - /* Restore low level PMU operations */ - pmu_unlock(); - - /* Restore decrementer */ - wakeup_decrementer(); - - /* Restore interrupts */ - mpic_cpu_set_priority(pic_prio); - - /* Let interrupts flow again ... */ - local_irq_restore(flags); - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - pmu_resume(); - - preempt_enable(); - - return 0; -} - -static int do_set_cpu_speed(int speed_mode, int notify) -{ - struct cpufreq_freqs freqs; - unsigned long l3cr; - static unsigned long prev_l3cr; - - freqs.old = cur_freq; - freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - freqs.cpu = smp_processor_id(); - - if (freqs.old == freqs.new) - return 0; - - if (notify) - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (speed_mode == CPUFREQ_LOW && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if (l3cr & L3CR_L3E) { - prev_l3cr = l3cr; - _set_L3CR(0); - } - } - set_speed_proc(speed_mode == CPUFREQ_LOW); - if (speed_mode == CPUFREQ_HIGH && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) - _set_L3CR(prev_l3cr); - } - if (notify) - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - return 0; -} - -static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) -{ - return cur_freq; -} - -static int pmac_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); -} - -static int pmac_cpufreq_target( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - int rc; - - if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - rc = do_set_cpu_speed(newstate, 1); - - ppc_proc_freq = cur_freq * 1000ul; - return rc; -} - -static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -ENODEV; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = cur_freq; - - cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); -} - -static u32 read_gpio(struct device_node *np) -{ - const u32 *reg = of_get_property(np, "reg", NULL); - u32 offset; - - if (reg == NULL) - return 0; - /* That works for all keylargos but shall be fixed properly - * some day... The problem is that it seems we can't rely - * on the "reg" property of the GPIO nodes, they are either - * relative to the base of KeyLargo or to the base of the - * GPIO space, and the device-tree doesn't help. - */ - offset = *reg; - if (offset < KEYLARGO_GPIO_LEVELS0) - offset += KEYLARGO_GPIO_LEVELS0; - return offset; -} - -static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) -{ - /* Ok, this could be made a bit smarter, but let's be robust for now. We - * always force a speed change to high speed before sleep, to make sure - * we have appropriate voltage and/or bus speed for the wakeup process, - * and to make sure our loops_per_jiffies are "good enough", that is will - * not cause too short delays if we sleep in low speed and wake in high - * speed.. - */ - no_schedule = 1; - sleep_freq = cur_freq; - if (cur_freq == low_freq && !is_pmu_based) - do_set_cpu_speed(CPUFREQ_HIGH, 0); - return 0; -} - -static int pmac_cpufreq_resume(struct cpufreq_policy *policy) -{ - /* If we resume, first check if we have a get() function */ - if (get_speed_proc) - cur_freq = get_speed_proc(); - else - cur_freq = 0; - - /* We don't, hrm... we don't really know our speed here, best - * is that we force a switch to whatever it was, which is - * probably high speed due to our suspend() routine - */ - do_set_cpu_speed(sleep_freq == low_freq ? - CPUFREQ_LOW : CPUFREQ_HIGH, 0); - - ppc_proc_freq = cur_freq * 1000ul; - - no_schedule = 0; - return 0; -} - -static struct cpufreq_driver pmac_cpufreq_driver = { - .verify = pmac_cpufreq_verify, - .target = pmac_cpufreq_target, - .get = pmac_cpufreq_get_speed, - .init = pmac_cpufreq_cpu_init, - .suspend = pmac_cpufreq_suspend, - .resume = pmac_cpufreq_resume, - .flags = CPUFREQ_PM_NO_WARN, - .attr = pmac_cpu_freqs_attr, - .name = "powermac", - .owner = THIS_MODULE, -}; - - -static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np = of_find_node_by_name(NULL, - "voltage-gpio"); - struct device_node *freq_gpio_np = of_find_node_by_name(NULL, - "frequency-gpio"); - struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, - "slewing-done"); - const u32 *value; - - /* - * Check to see if it's GPIO driven or PMU only - * - * The way we extract the GPIO address is slightly hackish, but it - * works well enough for now. We need to abstract the whole GPIO - * stuff sooner or later anyway - */ - - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (freq_gpio_np) - frequency_gpio = read_gpio(freq_gpio_np); - if (slew_done_gpio_np) - slew_done_gpio = read_gpio(slew_done_gpio_np); - - /* If we use the frequency GPIOs, calculate the min/max speeds based - * on the bus frequencies - */ - if (frequency_gpio && slew_done_gpio) { - int lenp, rc; - const u32 *freqs, *ratio; - - freqs = of_get_property(cpunode, "bus-frequencies", &lenp); - lenp /= sizeof(u32); - if (freqs == NULL || lenp != 2) { - printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); - return 1; - } - ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", - NULL); - if (ratio == NULL) { - printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); - return 1; - } - - /* Get the min/max bus frequencies */ - low_freq = min(freqs[0], freqs[1]); - hi_freq = max(freqs[0], freqs[1]); - - /* Grrrr.. It _seems_ that the device-tree is lying on the low bus - * frequency, it claims it to be around 84Mhz on some models while - * it appears to be approx. 101Mhz on all. Let's hack around here... - * fortunately, we don't need to be too precise - */ - if (low_freq < 98000000) - low_freq = 101000000; - - /* Convert those to CPU core clocks */ - low_freq = (low_freq * (*ratio)) / 2000; - hi_freq = (hi_freq * (*ratio)) / 2000; - - /* Now we get the frequencies, we read the GPIO to see what is out current - * speed - */ - rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - cur_freq = (rc & 0x01) ? hi_freq : low_freq; - - set_speed_proc = gpios_set_cpu_speed; - return 1; - } - - /* If we use the PMU, look for the min & max frequencies in the - * device-tree - */ - value = of_get_property(cpunode, "min-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree - * here */ - if (low_freq < 100000) - low_freq *= 10; - - value = of_get_property(cpunode, "max-clock-frequency", NULL); - if (!value) - return 1; - hi_freq = (*value) / 1000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - - return 0; -} - -static int pmac_cpufreq_init_7447A(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - - if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (!voltage_gpio){ - printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); - return 1; - } - - /* OF only reports the high frequency */ - hi_freq = cur_freq; - low_freq = cur_freq/2; - - /* Read actual frequency from CPU */ - cur_freq = dfs_get_cpu_speed(); - set_speed_proc = dfs_set_cpu_speed; - get_speed_proc = dfs_get_cpu_speed; - - return 0; -} - -static int pmac_cpufreq_init_750FX(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - u32 pvr; - const u32 *value; - - if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - hi_freq = cur_freq; - value = of_get_property(cpunode, "reduced-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - - pvr = mfspr(SPRN_PVR); - has_cpu_l2lve = !((pvr & 0xf00) == 0x100); - - set_speed_proc = cpu_750fx_cpu_speed; - get_speed_proc = cpu_750fx_get_cpu_speed; - cur_freq = cpu_750fx_get_cpu_speed(); - - return 0; -} - -/* Currently, we support the following machines: - * - * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) - * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) - * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) - * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) - * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) - * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) - * - Recent MacRISC3 laptops - * - All new machines with 7447A CPUs - */ -static int __init pmac_cpufreq_setup(void) -{ - struct device_node *cpunode; - const u32 *value; - - if (strstr(cmd_line, "nocpufreq")) - return 0; - - /* Assume only one CPU */ - cpunode = of_find_node_by_type(NULL, "cpu"); - if (!cpunode) - goto out; - - /* Get current cpu clock freq */ - value = of_get_property(cpunode, "clock-frequency", NULL); - if (!value) - goto out; - cur_freq = (*value) / 1000; - - /* Check for 7447A based MacRISC3 */ - if (machine_is_compatible("MacRISC3") && - of_get_property(cpunode, "dynamic-power-step", NULL) && - PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { - pmac_cpufreq_init_7447A(cpunode); - /* Check for other MacRISC3 machines */ - } else if (machine_is_compatible("PowerBook3,4") || - machine_is_compatible("PowerBook3,5") || - machine_is_compatible("MacRISC3")) { - pmac_cpufreq_init_MacRISC3(cpunode); - /* Else check for iBook2 500/600 */ - } else if (machine_is_compatible("PowerBook4,1")) { - hi_freq = cur_freq; - low_freq = 400000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 550 */ - else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { - hi_freq = cur_freq; - low_freq = 500000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 400 & 500 */ - else if (machine_is_compatible("PowerBook3,2")) { - /* We only know about the 400 MHz and the 500Mhz model - * they both have 300 MHz as low frequency - */ - if (cur_freq < 350000 || cur_freq > 550000) - goto out; - hi_freq = cur_freq; - low_freq = 300000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for 750FX */ - else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) - pmac_cpufreq_init_750FX(cpunode); -out: - of_node_put(cpunode); - if (set_speed_proc == NULL) - return -ENODEV; - - pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; - pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; - ppc_proc_freq = cur_freq * 1000ul; - - printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", - low_freq/1000, hi_freq/1000, cur_freq/1000); - - return cpufreq_register_driver(&pmac_cpufreq_driver); -} - -module_init(pmac_cpufreq_setup); - diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c deleted file mode 100644 index 4dfb4bc242b..00000000000 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ /dev/null @@ -1,745 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, - * that is iMac G5 and latest single CPU desktop. - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/completion.h> -#include <linux/mutex.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/sections.h> -#include <asm/cputable.h> -#include <asm/time.h> -#include <asm/smu.h> -#include <asm/pmac_pfunc.h> - -#define DBG(fmt...) pr_debug(fmt) - -/* see 970FX user manual */ - -#define SCOM_PCR 0x0aa001 /* PCR scom addr */ - -#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ -#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ -#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ -#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ -#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ -#define PCR_SPEED_SHIFT 17 -#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ -#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ -#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ -#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ -#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ -#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ - -#define SCOM_PSR 0x408001 /* PSR scom addr */ -/* warning: PSR is a 64 bits register */ -#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ -#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ -#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ -#define PSR_CUR_SPEED_SHIFT (56) - -/* - * The G5 only supports two frequencies (Quarter speed is not supported) - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table g5_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* g5_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -/* Power mode data is an array of the 32 bits PCR values to use for - * the various frequencies, retrieved from the device-tree - */ -static int g5_pmode_cur; - -static void (*g5_switch_volt)(int speed_mode); -static int (*g5_switch_freq)(int speed_mode); -static int (*g5_query_freq)(void); - -static DEFINE_MUTEX(g5_switch_mutex); - - -#ifdef CONFIG_PMAC_SMU - -static const u32 *g5_pmode_data; -static int g5_pmode_max; - -static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ -static int g5_fvt_count; /* number of op. points */ -static int g5_fvt_cur; /* current op. point */ - -/* - * SMU based voltage switching for Neo2 platforms - */ - -static void g5_smu_switch_volt(int speed_mode) -{ - struct smu_simple_cmd cmd; - - DECLARE_COMPLETION_ONSTACK(comp); - smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, - &comp, 'V', 'S', 'L', 'E', 'W', - 0xff, g5_fvt_cur+1, speed_mode); - wait_for_completion(&comp); -} - -/* - * Platform function based voltage/vdnap switching for Neo2 - */ - -static struct pmf_function *pfunc_set_vdnap0; -static struct pmf_function *pfunc_vdnap0_complete; - -static void g5_vdnap_switch_volt(int speed_mode) -{ - struct pmf_args args; - u32 slew, done = 0; - unsigned long timeout; - - slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; - args.count = 1; - args.u[0].p = &slew; - - pmf_call_one(pfunc_set_vdnap0, &args); - - /* It's an irq GPIO so we should be able to just block here, - * I'll do that later after I've properly tested the IRQ code for - * platform functions - */ - timeout = jiffies + HZ/10; - while(!time_after(jiffies, timeout)) { - args.count = 1; - args.u[0].p = &done; - pmf_call_one(pfunc_vdnap0_complete, &args); - if (done) - break; - msleep(1); - } - if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); -} - - -/* - * SCOM based frequency switching for 970FX rev3 - */ -static int g5_scom_switch_freq(int speed_mode) -{ - unsigned long flags; - int to; - - /* If frequency is going up, first ramp up the voltage */ - if (speed_mode < g5_pmode_cur) - g5_switch_volt(speed_mode); - - local_irq_save(flags); - - /* Clear PCR high */ - scom970_write(SCOM_PCR, 0); - /* Clear PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); - /* Set PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | - g5_pmode_data[speed_mode]); - - /* Wait for completion */ - for (to = 0; to < 10; to++) { - unsigned long psr = scom970_read(SCOM_PSR); - - if ((psr & PSR_CMD_RECEIVED) == 0 && - (((psr >> PSR_CUR_SPEED_SHIFT) ^ - (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) - == 0) - break; - if (psr & PSR_CMD_COMPLETED) - break; - udelay(100); - } - - local_irq_restore(flags); - - /* If frequency is going down, last ramp the voltage */ - if (speed_mode > g5_pmode_cur) - g5_switch_volt(speed_mode); - - g5_pmode_cur = speed_mode; - ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int g5_scom_query_freq(void) -{ - unsigned long psr = scom970_read(SCOM_PSR); - int i; - - for (i = 0; i <= g5_pmode_max; i++) - if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ - (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) - break; - return i; -} - -/* - * Fake voltage switching for platforms with missing support - */ - -static void g5_dummy_switch_volt(int speed_mode) -{ -} - -#endif /* CONFIG_PMAC_SMU */ - -/* - * Platform function based voltage switching for PowerMac7,2 & 7,3 - */ - -static struct pmf_function *pfunc_cpu0_volt_high; -static struct pmf_function *pfunc_cpu0_volt_low; -static struct pmf_function *pfunc_cpu1_volt_high; -static struct pmf_function *pfunc_cpu1_volt_low; - -static void g5_pfunc_switch_volt(int speed_mode) -{ - if (speed_mode == CPUFREQ_HIGH) { - if (pfunc_cpu0_volt_high) - pmf_call_one(pfunc_cpu0_volt_high, NULL); - if (pfunc_cpu1_volt_high) - pmf_call_one(pfunc_cpu1_volt_high, NULL); - } else { - if (pfunc_cpu0_volt_low) - pmf_call_one(pfunc_cpu0_volt_low, NULL); - if (pfunc_cpu1_volt_low) - pmf_call_one(pfunc_cpu1_volt_low, NULL); - } - msleep(10); /* should be faster , to fix */ -} - -/* - * Platform function based frequency switching for PowerMac7,2 & 7,3 - */ - -static struct pmf_function *pfunc_cpu_setfreq_high; -static struct pmf_function *pfunc_cpu_setfreq_low; -static struct pmf_function *pfunc_cpu_getfreq; -static struct pmf_function *pfunc_slewing_done;; - -static int g5_pfunc_switch_freq(int speed_mode) -{ - struct pmf_args args; - u32 done = 0; - unsigned long timeout; - int rc; - - DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); - - /* If frequency is going up, first ramp up the voltage */ - if (speed_mode < g5_pmode_cur) - g5_switch_volt(speed_mode); - - /* Do it */ - if (speed_mode == CPUFREQ_HIGH) - rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); - else - rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); - - if (rc) - printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); - - /* It's an irq GPIO so we should be able to just block here, - * I'll do that later after I've properly tested the IRQ code for - * platform functions - */ - timeout = jiffies + HZ/10; - while(!time_after(jiffies, timeout)) { - args.count = 1; - args.u[0].p = &done; - pmf_call_one(pfunc_slewing_done, &args); - if (done) - break; - msleep(1); - } - if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); - - /* If frequency is going down, last ramp the voltage */ - if (speed_mode > g5_pmode_cur) - g5_switch_volt(speed_mode); - - g5_pmode_cur = speed_mode; - ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int g5_pfunc_query_freq(void) -{ - struct pmf_args args; - u32 val = 0; - - args.count = 1; - args.u[0].p = &val; - pmf_call_one(pfunc_cpu_getfreq, &args); - return val ? CPUFREQ_HIGH : CPUFREQ_LOW; -} - - -/* - * Common interface to the cpufreq core - */ - -static int g5_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); -} - -static int g5_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - int rc; - - if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - if (g5_pmode_cur == newstate) - return 0; - - mutex_lock(&g5_switch_mutex); - - freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; - freqs.new = g5_cpu_freqs[newstate].frequency; - freqs.cpu = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - rc = g5_switch_freq(newstate); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - mutex_unlock(&g5_switch_mutex); - - return rc; -} - -static unsigned int g5_cpufreq_get_speed(unsigned int cpu) -{ - return g5_cpu_freqs[g5_pmode_cur].frequency; -} - -static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; - /* secondary CPUs are tied to the primary one by the - * cpufreq core if in the secondary policy we tell it that - * it actually must be one policy together with all others. */ - policy->cpus = cpu_online_map; - cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, - g5_cpu_freqs); -} - - -static struct cpufreq_driver g5_cpufreq_driver = { - .name = "powermac", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, - .init = g5_cpufreq_cpu_init, - .verify = g5_cpufreq_verify, - .target = g5_cpufreq_target, - .get = g5_cpufreq_get_speed, - .attr = g5_cpu_freqs_attr, -}; - - -#ifdef CONFIG_PMAC_SMU - -static int __init g5_neo2_cpufreq_init(struct device_node *cpus) -{ - struct device_node *cpunode; - unsigned int psize, ssize; - unsigned long max_freq; - char *freq_method, *volt_method; - const u32 *valp; - u32 pvr_hi; - int use_volts_vdnap = 0; - int use_volts_smu = 0; - int rc = -ENODEV; - - /* Check supported platforms */ - if (machine_is_compatible("PowerMac8,1") || - machine_is_compatible("PowerMac8,2") || - machine_is_compatible("PowerMac9,1")) - use_volts_smu = 1; - else if (machine_is_compatible("PowerMac11,2")) - use_volts_vdnap = 1; - else - return -ENODEV; - - /* Get first CPU node */ - for (cpunode = NULL; - (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - const u32 *reg = of_get_property(cpunode, "reg", NULL); - if (reg == NULL || (*reg) != 0) - continue; - if (!strcmp(cpunode->type, "cpu")) - break; - } - if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); - return -ENODEV; - } - - /* Check 970FX for now */ - valp = of_get_property(cpunode, "cpu-version", NULL); - if (!valp) { - DBG("No cpu-version property !\n"); - goto bail_noprops; - } - pvr_hi = (*valp) >> 16; - if (pvr_hi != 0x3c && pvr_hi != 0x44) { - printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); - goto bail_noprops; - } - - /* Look for the powertune data in the device-tree */ - g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); - if (!g5_pmode_data) { - DBG("No power-mode-data !\n"); - goto bail_noprops; - } - g5_pmode_max = psize / sizeof(u32) - 1; - - if (use_volts_smu) { - const struct smu_sdbp_header *shdr; - - /* Look for the FVT table */ - shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); - if (!shdr) - goto bail_noprops; - g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; - ssize = (shdr->len * sizeof(u32)) - - sizeof(struct smu_sdbp_header); - g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); - g5_fvt_cur = 0; - - /* Sanity checking */ - if (g5_fvt_count < 1 || g5_pmode_max < 1) - goto bail_noprops; - - g5_switch_volt = g5_smu_switch_volt; - volt_method = "SMU"; - } else if (use_volts_vdnap) { - struct device_node *root; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_ERR "cpufreq: Can't find root of " - "device tree\n"); - goto bail_noprops; - } - pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); - pfunc_vdnap0_complete = - pmf_find_function(root, "slewing-done"); - if (pfunc_set_vdnap0 == NULL || - pfunc_vdnap0_complete == NULL) { - printk(KERN_ERR "cpufreq: Can't find required " - "platform function\n"); - goto bail_noprops; - } - - g5_switch_volt = g5_vdnap_switch_volt; - volt_method = "GPIO"; - } else { - g5_switch_volt = g5_dummy_switch_volt; - volt_method = "none"; - } - - /* - * From what I see, clock-frequency is always the maximal frequency. - * The current driver can not slew sysclk yet, so we really only deal - * with powertune steps for now. We also only implement full freq and - * half freq in this version. So far, I haven't yet seen a machine - * supporting anything else. - */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) - return -ENODEV; - max_freq = (*valp)/1000; - g5_cpu_freqs[0].frequency = max_freq; - g5_cpu_freqs[1].frequency = max_freq/2; - - /* Set callbacks */ - g5_switch_freq = g5_scom_switch_freq; - g5_query_freq = g5_scom_query_freq; - freq_method = "SCOM"; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - g5_switch_volt(CPUFREQ_HIGH); - msleep(10); - g5_pmode_cur = -1; - g5_switch_freq(g5_query_freq()); - - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", - freq_method, volt_method); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - g5_cpu_freqs[1].frequency/1000, - g5_cpu_freqs[0].frequency/1000, - g5_cpu_freqs[g5_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&g5_cpufreq_driver); - - /* We keep the CPU node on hold... hopefully, Apple G5 don't have - * hotplug CPU with a dynamic device-tree ... - */ - return rc; - - bail_noprops: - of_node_put(cpunode); - - return rc; -} - -#endif /* CONFIG_PMAC_SMU */ - - -static int __init g5_pm72_cpufreq_init(struct device_node *cpus) -{ - struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; - const u8 *eeprom = NULL; - const u32 *valp; - u64 max_freq, min_freq, ih, il; - int has_volt = 1, rc = 0; - - DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" - " RackMac3,1...\n"); - - /* Get first CPU node */ - for (cpunode = NULL; - (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - if (!strcmp(cpunode->type, "cpu")) - break; - } - if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); - return -ENODEV; - } - - /* Lookup the cpuid eeprom node */ - cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); - if (cpuid != NULL) - eeprom = of_get_property(cpuid, "cpuid", NULL); - if (eeprom == NULL) { - printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); - rc = -ENODEV; - goto bail; - } - - /* Lookup the i2c hwclock */ - for (hwclock = NULL; - (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ - const char *loc = of_get_property(hwclock, - "hwctrl-location", NULL); - if (loc == NULL) - continue; - if (strcmp(loc, "CPU CLOCK")) - continue; - if (!of_get_property(hwclock, "platform-get-frequency", NULL)) - continue; - break; - } - if (hwclock == NULL) { - printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); - rc = -ENODEV; - goto bail; - } - - DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); - - /* Now get all the platform functions */ - pfunc_cpu_getfreq = - pmf_find_function(hwclock, "get-frequency"); - pfunc_cpu_setfreq_high = - pmf_find_function(hwclock, "set-frequency-high"); - pfunc_cpu_setfreq_low = - pmf_find_function(hwclock, "set-frequency-low"); - pfunc_slewing_done = - pmf_find_function(hwclock, "slewing-done"); - pfunc_cpu0_volt_high = - pmf_find_function(hwclock, "set-voltage-high-0"); - pfunc_cpu0_volt_low = - pmf_find_function(hwclock, "set-voltage-low-0"); - pfunc_cpu1_volt_high = - pmf_find_function(hwclock, "set-voltage-high-1"); - pfunc_cpu1_volt_low = - pmf_find_function(hwclock, "set-voltage-low-1"); - - /* Check we have minimum requirements */ - if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || - pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { - printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); - rc = -ENODEV; - goto bail; - } - - /* Check that we have complete sets */ - if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { - pmf_put_function(pfunc_cpu0_volt_high); - pmf_put_function(pfunc_cpu0_volt_low); - pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; - has_volt = 0; - } - if (!has_volt || - pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { - pmf_put_function(pfunc_cpu1_volt_high); - pmf_put_function(pfunc_cpu1_volt_low); - pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; - } - - /* Note: The device tree also contains a "platform-set-values" - * function for which I haven't quite figured out the usage. It - * might have to be called on init and/or wakeup, I'm not too sure - * but things seem to work fine without it so far ... - */ - - /* Get max frequency from device-tree */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) { - printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); - rc = -ENODEV; - goto bail; - } - - max_freq = (*valp)/1000; - - /* Now calculate reduced frequency by using the cpuid input freq - * ratio. This requires 64 bits math unless we are willing to lose - * some precision - */ - ih = *((u32 *)(eeprom + 0x10)); - il = *((u32 *)(eeprom + 0x20)); - - /* Check for machines with no useful settings */ - if (il == ih) { - printk(KERN_WARNING "cpufreq: No low frequency mode available" - " on this model !\n"); - rc = -ENODEV; - goto bail; - } - - min_freq = 0; - if (ih != 0 && il != 0) - min_freq = (max_freq * il) / ih; - - /* Sanity check */ - if (min_freq >= max_freq || min_freq < 1000) { - printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); - rc = -ENXIO; - goto bail; - } - g5_cpu_freqs[0].frequency = max_freq; - g5_cpu_freqs[1].frequency = min_freq; - - /* Set callbacks */ - g5_switch_volt = g5_pfunc_switch_volt; - g5_switch_freq = g5_pfunc_switch_freq; - g5_query_freq = g5_pfunc_query_freq; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - g5_switch_volt(CPUFREQ_HIGH); - msleep(10); - g5_pmode_cur = -1; - g5_switch_freq(g5_query_freq()); - - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: i2c/pfunc, " - "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - g5_cpu_freqs[1].frequency/1000, - g5_cpu_freqs[0].frequency/1000, - g5_cpu_freqs[g5_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&g5_cpufreq_driver); - bail: - if (rc != 0) { - pmf_put_function(pfunc_cpu_getfreq); - pmf_put_function(pfunc_cpu_setfreq_high); - pmf_put_function(pfunc_cpu_setfreq_low); - pmf_put_function(pfunc_slewing_done); - pmf_put_function(pfunc_cpu0_volt_high); - pmf_put_function(pfunc_cpu0_volt_low); - pmf_put_function(pfunc_cpu1_volt_high); - pmf_put_function(pfunc_cpu1_volt_low); - } - of_node_put(hwclock); - of_node_put(cpuid); - of_node_put(cpunode); - - return rc; -} - -static int __init g5_cpufreq_init(void) -{ - struct device_node *cpus; - int rc = 0; - - cpus = of_find_node_by_path("/cpus"); - if (cpus == NULL) { - DBG("No /cpus node !\n"); - return -ENODEV; - } - - if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3") || - machine_is_compatible("RackMac3,1")) - rc = g5_pm72_cpufreq_init(cpus); -#ifdef CONFIG_PMAC_SMU - else - rc = g5_neo2_cpufreq_init(cpus); -#endif /* CONFIG_PMAC_SMU */ - - of_node_put(cpus); - return rc; -} - -module_init(g5_cpufreq_init); - - -MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 5169ecc3712..63d82bbc05e 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -21,10 +21,13 @@ #include <linux/delay.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/spinlock.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/ioport.h> +#include <linux/export.h> #include <linux/pci.h> #include <asm/sections.h> #include <asm/errno.h> @@ -59,10 +62,10 @@ extern struct device_node *k2_skiplist[2]; * We use a single global lock to protect accesses. Each driver has * to take care of its own locking */ -DEFINE_SPINLOCK(feature_lock); +DEFINE_RAW_SPINLOCK(feature_lock); -#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags); -#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags); +#define LOCK(flags) raw_spin_lock_irqsave(&feature_lock, flags); +#define UNLOCK(flags) raw_spin_unlock_irqrestore(&feature_lock, flags); /* @@ -2191,7 +2194,11 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP, }, - { "iMac,1", "iMac (first generation)", + { "PowerMac10,2", "Mac mini (Late 2005)", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "iMac,1", "iMac (first generation)", PMAC_TYPE_ORIG_IMAC, paddington_features, 0 }, @@ -2419,14 +2426,14 @@ static int __init probe_motherboard(void) dt = of_find_node_by_name(NULL, "device-tree"); if (dt != NULL) model = of_get_property(dt, "model", NULL); - for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { + for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) { if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { pmac_mb = pmac_mb_defs[i]; goto found; } } - for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { - if (machine_is_compatible(pmac_mb_defs[i].model_string)) { + for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) { + if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) { pmac_mb = pmac_mb_defs[i]; goto found; } @@ -2589,9 +2596,16 @@ static void __init probe_uninorth(void) if (address == 0) return; uninorth_base = ioremap(address, 0x40000); + if (uninorth_base == NULL) + return; uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - if (uninorth_maj == 3 || uninorth_maj == 4) + if (uninorth_maj == 3 || uninorth_maj == 4) { u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + if (u3_ht_base == NULL) { + iounmap(uninorth_base); + return; + } + } printk(KERN_INFO "Found %s memory controller & host bridge" " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : @@ -2677,7 +2691,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ macio_chips[i].of_node = node; macio_chips[i].type = type; macio_chips[i].base = base; - macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON; + macio_chips[i].flags = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON; macio_chips[i].name = macio_names[type]; revp = of_get_property(node, "revision-id", NULL); if (revp) @@ -2860,12 +2874,11 @@ set_initial_features(void) /* Switch airport off */ for_each_node_by_name(np, "radio") { - if (np && np->parent == macio_chips[0].of_node) { + if (np->parent == macio_chips[0].of_node) { macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; core99_airport_enable(np, 0, 0); } } - of_node_put(np); } /* On all machines that support sound PM, switch sound off */ diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 21226b74c9b..7553b6a77c6 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -33,7 +33,7 @@ #include <linux/types.h> #include <linux/sched.h> #include <linux/init.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/delay.h> @@ -42,6 +42,8 @@ #include <linux/interrupt.h> #include <linux/timer.h> #include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/slab.h> #include <asm/keylargo.h> #include <asm/uninorth.h> #include <asm/io.h> @@ -80,7 +82,7 @@ struct pmac_i2c_bus struct device_node *busnode; int type; int flags; - struct i2c_adapter *adapter; + struct i2c_adapter adapter; void *hostdata; int channel; /* some hosts have multiple */ int mode; /* current mode */ @@ -364,11 +366,20 @@ static void kw_i2c_timeout(unsigned long data) unsigned long flags; spin_lock_irqsave(&host->lock, flags); + + /* + * If the timer is pending, that means we raced with the + * irq, in which case we just return + */ + if (timer_pending(&host->timeout_timer)) + goto skip; + kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr)); if (host->state != state_idle) { host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; add_timer(&host->timeout_timer); } + skip: spin_unlock_irqrestore(&host->lock, flags); } @@ -441,7 +452,7 @@ static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, */ if (use_irq) { /* Clear completion */ - INIT_COMPLETION(host->complete); + reinit_completion(&host->complete); /* Ack stale interrupts */ kw_write_reg(reg_isr, kw_read_reg(reg_isr)); /* Arm timeout */ @@ -540,8 +551,12 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) /* Make sure IRQ is disabled */ kw_write_reg(reg_ier, 0); - /* Request chip interrupt */ - if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host)) + /* Request chip interrupt. We set IRQF_NO_SUSPEND because we don't + * want that interrupt disabled between the 2 passes of driver + * suspend or we'll have issues running the pfuncs + */ + if (request_irq(host->irq, kw_i2c_irq, IRQF_NO_SUSPEND, + "keywest i2c", host)) host->irq = NO_IRQ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n", @@ -587,7 +602,7 @@ static void __init kw_i2c_probe(void) /* Probe keywest-i2c busses */ for_each_compatible_node(np, "i2c","keywest-i2c") { struct pmac_i2c_host_kw *host; - int multibus, chans, i; + int multibus; /* Found one, init a host structure */ host = kw_i2c_host_init(np); @@ -609,6 +624,8 @@ static void __init kw_i2c_probe(void) * parent type */ if (multibus) { + int chans, i; + parent = of_get_parent(np); if (parent == NULL) continue; @@ -700,7 +717,7 @@ static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, return -EINVAL; } - INIT_COMPLETION(comp); + reinit_completion(&comp); req->data[0] = PMU_I2C_CMD; req->reply[0] = 0xff; req->nbytes = sizeof(struct pmu_i2c_hdr) + 1; @@ -731,7 +748,7 @@ static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, hdr->bus = PMU_I2C_BUS_STATUS; - INIT_COMPLETION(comp); + reinit_completion(&comp); req->data[0] = PMU_I2C_CMD; req->reply[0] = 0xff; req->nbytes = 2; @@ -896,7 +913,7 @@ static void __init smu_i2c_probe(void) printk(KERN_INFO "SMU i2c %s\n", controller->full_name); /* Look for childs, note that they might not be of the right - * type as older device trees mix i2c busses and other thigns + * type as older device trees mix i2c busses and other things * at the same level */ for (busnode = NULL; @@ -1011,25 +1028,9 @@ int pmac_i2c_get_channel(struct pmac_i2c_bus *bus) EXPORT_SYMBOL_GPL(pmac_i2c_get_channel); -void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus, - struct i2c_adapter *adapter) -{ - WARN_ON(bus->adapter != NULL); - bus->adapter = adapter; -} -EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter); - -void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus, - struct i2c_adapter *adapter) -{ - WARN_ON(bus->adapter != adapter); - bus->adapter = NULL; -} -EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter); - struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus) { - return bus->adapter; + return &bus->adapter; } EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter); @@ -1038,7 +1039,7 @@ struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter) struct pmac_i2c_bus *bus; list_for_each_entry(bus, &pmac_i2c_busses, link) - if (bus->adapter == adapter) + if (&bus->adapter == adapter) return bus; return NULL; } @@ -1050,7 +1051,7 @@ int pmac_i2c_match_adapter(struct device_node *dev, struct i2c_adapter *adapter) if (bus == NULL) return 0; - return (bus->adapter == adapter); + return (&bus->adapter == adapter); } EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter); @@ -1269,8 +1270,7 @@ static void pmac_i2c_do_end(struct pmf_function *func, void *instdata) if (inst == NULL) return; pmac_i2c_close(inst->bus); - if (inst) - kfree(inst); + kfree(inst); } static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len) @@ -1503,6 +1503,7 @@ static int __init pmac_i2c_create_platform_devices(void) if (bus->platform_dev == NULL) return -ENOMEM; bus->platform_dev->dev.platform_data = bus; + bus->platform_dev->dev.of_node = bus->busnode; platform_device_add(bus->platform_dev); } diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index c6f0f9e738e..014d06e6d46 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -8,13 +8,12 @@ * * Todo: - add support for the OF persistent properties */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/kernel.h> #include <linux/stddef.h> #include <linux/string.h> #include <linux/nvram.h> #include <linux/init.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/adb.h> @@ -24,7 +23,6 @@ #include <linux/spinlock.h> #include <asm/sections.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/prom.h> #include <asm/machdep.h> #include <asm/nvram.h> @@ -80,7 +78,7 @@ static int is_core_99; static int core99_bank = 0; static int nvram_partitions[3]; // XXX Turn that into a sem -static DEFINE_SPINLOCK(nv_lock); +static DEFINE_RAW_SPINLOCK(nv_lock); static int (*core99_write_bank)(int bank, u8* datas); static int (*core99_erase_bank)(int bank); @@ -165,10 +163,10 @@ static unsigned char indirect_nvram_read_byte(int addr) unsigned char val; unsigned long flags; - spin_lock_irqsave(&nv_lock, flags); + raw_spin_lock_irqsave(&nv_lock, flags); out_8(nvram_addr, addr >> 5); val = in_8(&nvram_data[(addr & 0x1f) << 4]); - spin_unlock_irqrestore(&nv_lock, flags); + raw_spin_unlock_irqrestore(&nv_lock, flags); return val; } @@ -177,10 +175,10 @@ static void indirect_nvram_write_byte(int addr, unsigned char val) { unsigned long flags; - spin_lock_irqsave(&nv_lock, flags); + raw_spin_lock_irqsave(&nv_lock, flags); out_8(nvram_addr, addr >> 5); out_8(&nvram_data[(addr & 0x1f) << 4], val); - spin_unlock_irqrestore(&nv_lock, flags); + raw_spin_unlock_irqrestore(&nv_lock, flags); } @@ -280,7 +278,7 @@ static u32 core99_check(u8* datas) static int sm_erase_bank(int bank) { - int stat, i; + int stat; unsigned long timeout; u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; @@ -302,11 +300,10 @@ static int sm_erase_bank(int bank) out_8(base, SM_FLASH_CMD_CLEAR_STATUS); out_8(base, SM_FLASH_CMD_RESET); - for (i=0; i<NVRAM_SIZE; i++) - if (base[i] != 0xff) { - printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n"); - return -ENXIO; - } + if (memchr_inv(base, 0xff, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n"); + return -ENXIO; + } return 0; } @@ -337,17 +334,16 @@ static int sm_write_bank(int bank, u8* datas) } out_8(base, SM_FLASH_CMD_CLEAR_STATUS); out_8(base, SM_FLASH_CMD_RESET); - for (i=0; i<NVRAM_SIZE; i++) - if (base[i] != datas[i]) { - printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n"); - return -ENXIO; - } + if (memcmp(base, datas, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n"); + return -ENXIO; + } return 0; } static int amd_erase_bank(int bank) { - int i, stat = 0; + int stat = 0; unsigned long timeout; u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; @@ -383,12 +379,11 @@ static int amd_erase_bank(int bank) /* Reset */ out_8(base, 0xf0); udelay(1); - - for (i=0; i<NVRAM_SIZE; i++) - if (base[i] != 0xff) { - printk(KERN_ERR "nvram: AMD flash erase failed !\n"); - return -ENXIO; - } + + if (memchr_inv(base, 0xff, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: AMD flash erase failed !\n"); + return -ENXIO; + } return 0; } @@ -430,11 +425,10 @@ static int amd_write_bank(int bank, u8* datas) out_8(base, 0xf0); udelay(1); - for (i=0; i<NVRAM_SIZE; i++) - if (base[i] != datas[i]) { - printk(KERN_ERR "nvram: AMD flash write failed !\n"); - return -ENXIO; - } + if (memcmp(base, datas, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: AMD flash write failed !\n"); + return -ENXIO; + } return 0; } @@ -481,7 +475,7 @@ static void core99_nvram_sync(void) if (!is_core_99 || !nvram_data || !nvram_image) return; - spin_lock_irqsave(&nv_lock, flags); + raw_spin_lock_irqsave(&nv_lock, flags); if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE, NVRAM_SIZE)) goto bail; @@ -503,7 +497,7 @@ static void core99_nvram_sync(void) if (core99_write_bank(core99_bank, nvram_image)) printk("nvram: Error writing bank %d\n", core99_bank); bail: - spin_unlock_irqrestore(&nv_lock, flags); + raw_spin_unlock_irqrestore(&nv_lock, flags); #ifdef DEBUG mdelay(2000); @@ -581,10 +575,10 @@ int __init pmac_nvram_init(void) /* Try to obtain an address */ if (of_address_to_resource(dp, 0, &r1) == 0) { nvram_naddrs = 1; - s1 = (r1.end - r1.start) + 1; + s1 = resource_size(&r1); if (of_address_to_resource(dp, 1, &r2) == 0) { nvram_naddrs = 2; - s2 = (r2.end - r2.start) + 1; + s2 = resource_size(&r2); } } diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 1c58db9d42c..cf7009b8c7b 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/bootmem.h> #include <linux/irq.h> +#include <linux/of_pci.h> #include <asm/sections.h> #include <asm/io.h> @@ -235,7 +236,7 @@ static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) if (offset >= 0x100) return PCIBIOS_BAD_REGISTER_NUMBER; - np = pci_busdev_to_OF_node(bus, devfn); + np = of_pci_find_child_device(bus->dev.of_node, devfn); if (np == NULL) return PCIBIOS_DEVICE_NOT_FOUND; @@ -299,10 +300,10 @@ static void __init setup_chaos(struct pci_controller *hose, * This function deals with some "special cases" devices. * * 0 -> No special case - * 1 -> Skip the device but act as if the access was successfull + * 1 -> Skip the device but act as if the access was successful * (return 0xff's on reads, eventually, cache config space * accesses in a later version) - * -1 -> Hide the device (unsuccessful acess) + * -1 -> Hide the device (unsuccessful access) */ static int u3_ht_skip_device(struct pci_controller *hose, struct pci_bus *bus, unsigned int devfn) @@ -560,6 +561,20 @@ static struct pci_ops u4_pcie_pci_ops = .write = u4_pcie_write_config, }; +static void pmac_pci_fixup_u4_of_node(struct pci_dev *dev) +{ + /* Apple's device-tree "hides" the root complex virtual P2P bridge + * on U4. However, Linux sees it, causing the PCI <-> OF matching + * code to fail to properly match devices below it. This works around + * it by setting the node of the bridge to point to the PHB node, + * which is not entirely correct but fixes the matching code and + * doesn't break anything else. It's also the simplest possible fix. + */ + if (dev->dev.of_node == NULL) + dev->dev.of_node = pcibios_get_phb_of_node(dev->bus); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node); + #endif /* CONFIG_PPC64 */ #ifdef CONFIG_PPC32 @@ -661,6 +676,7 @@ static void __init init_second_ohare(void) pci_find_hose_for_OF_device(np); if (!hose) { printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); + of_node_put(np); return; } early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); @@ -669,6 +685,7 @@ static void __init init_second_ohare(void) early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); } has_second_ohare = 1; + of_node_put(np); } /* @@ -729,7 +746,7 @@ static void __init setup_bandit(struct pci_controller *hose, static int __init setup_uninorth(struct pci_controller *hose, struct resource *addr) { - ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS; + pci_add_flags(PCI_REASSIGN_ALL_BUS); has_uninorth = 1; hose->ops = ¯isc_pci_ops; hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); @@ -807,6 +824,7 @@ static void __init parse_region_decode(struct pci_controller *hose, hose->mem_resources[cur].name = hose->dn->full_name; hose->mem_resources[cur].start = base; hose->mem_resources[cur].end = end; + hose->mem_offset[cur] = 0; DBG(" %d: 0x%08lx-0x%08lx\n", cur, base, end); } else { DBG(" : -0x%08lx\n", end); @@ -836,8 +854,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) * into cfg_addr */ hose->cfg_data = ioremap(cfg_res.start, 0x02000000); - hose->cfg_addr = ioremap(self_res.start, - self_res.end - self_res.start + 1); + hose->cfg_addr = ioremap(self_res.start, resource_size(&self_res)); /* * /ht node doesn't expose a "ranges" property, we read the register @@ -850,7 +867,6 @@ static void __init setup_u3_ht(struct pci_controller* hose) hose->io_resource.start = 0; hose->io_resource.end = 0x003fffff; hose->io_resource.flags = IORESOURCE_IO; - hose->pci_mem_offset = 0; hose->first_busno = 0; hose->last_busno = 0xef; @@ -972,7 +988,7 @@ static int __init pmac_add_bridge(struct device_node *dev) return 0; } -void __devinit pmac_pci_irq_fixup(struct pci_dev *dev) +void pmac_pci_irq_fixup(struct pci_dev *dev) { #ifdef CONFIG_PPC32 /* Fixup interrupt for the modem/ethernet combo controller. @@ -986,7 +1002,7 @@ void __devinit pmac_pci_irq_fixup(struct pci_dev *dev) dev->vendor == PCI_VENDOR_ID_DEC && dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) { dev->irq = irq_create_mapping(NULL, 60); - set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); } #endif /* CONFIG_PPC32 */ } @@ -996,7 +1012,7 @@ void __init pmac_pci_init(void) struct device_node *np, *root; struct device_node *ht = NULL; - ppc_pci_flags = PPC_PCI_CAN_SKIP_ISA_ALIGN; + pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN); root = of_find_node_by_path("/"); if (root == NULL) { @@ -1043,9 +1059,6 @@ void __init pmac_pci_init(void) } /* pmac_check_ht_link(); */ - /* We can allocate missing resources if any */ - pci_probe_only = 0; - #else /* CONFIG_PPC64 */ init_p2pbridge(); init_second_ohare(); @@ -1055,7 +1068,7 @@ void __init pmac_pci_init(void) * some offset between bus number and domains for now when we * assign all busses should help for now */ - if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_BUS) + if (pci_has_flag(PCI_REASSIGN_ALL_BUS)) pcibios_assign_bus_offset = 0x10; #endif } @@ -1125,7 +1138,7 @@ int pmac_pci_enable_device_hook(struct pci_dev *dev) return 0; } -void __devinit pmac_pci_fixup_ohci(struct pci_dev *dev) +void pmac_pci_fixup_ohci(struct pci_dev *dev) { struct device_node *node = pci_device_to_OF_node(dev); @@ -1144,28 +1157,6 @@ void __init pmac_pcibios_after_init(void) { struct device_node* nd; -#ifdef CONFIG_BLK_DEV_IDE - struct pci_dev *dev = NULL; - - /* OF fails to initialize IDE controllers on macs - * (and maybe other machines) - * - * Ideally, this should be moved to the IDE layer, but we need - * to check specifically with Andre Hedrick how to do it cleanly - * since the common IDE code seem to care about the fact that the - * BIOS may have disabled a controller. - * - * -- BenH - */ - for_each_pci_dev(dev) { - if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE) - continue; - if (pci_enable_device(dev)) - printk(KERN_WARNING - "pci: Failed to enable %s\n", pci_name(dev)); - } -#endif /* CONFIG_BLK_DEV_IDE */ - for_each_node_by_name(nd, "firewire") { if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") || of_device_is_compatible(nd, "pci106b,30") || @@ -1175,13 +1166,11 @@ void __init pmac_pcibios_after_init(void) pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); } } - of_node_put(nd); for_each_node_by_name(nd, "ethernet") { if (nd->parent && of_device_is_compatible(nd, "gmac") && of_device_is_compatible(nd->parent, "uni-north")) pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); } - of_node_put(nd); } void pmac_pci_fixup_cardbus(struct pci_dev* dev) @@ -1306,3 +1295,63 @@ static void fixup_k2_sata(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); +/* + * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't + * configured by the firmware. The bridge itself seems to ignore them but it + * causes problems with Linux which then re-assigns devices below the bridge, + * thus changing addresses of those devices from what was in the device-tree, + * which sucks when those are video cards using offb + * + * We could just mark it transparent but I prefer fixing up the resources to + * properly show what's going on here, as I have some doubts about having them + * badly configured potentially being an issue for DMA. + * + * We leave PIO alone, it seems to be fine + * + * Oh and there's another funny bug. The OF properties advertize the region + * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's + * actually not true, this region is the memory mapped config space. So we + * also need to filter it out or we'll map things in the wrong place. + */ +static void fixup_u4_pcie(struct pci_dev* dev) +{ + struct pci_controller *host = pci_bus_to_host(dev->bus); + struct resource *region = NULL; + u32 reg; + int i; + + /* Only do that on PowerMac */ + if (!machine_is(powermac)) + return; + + /* Find the largest MMIO region */ + for (i = 0; i < 3; i++) { + struct resource *r = &host->mem_resources[i]; + if (!(r->flags & IORESOURCE_MEM)) + continue; + /* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they + * are reserved by HW for other things + */ + if (r->start >= 0xf0000000 && r->start < 0xf3000000) + continue; + if (!region || resource_size(r) > resource_size(region)) + region = r; + } + /* Nothing found, bail */ + if (region == 0) + return; + + /* Print things out */ + printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region); + + /* Fixup bridge config space. We know it's a Mac, resource aren't + * offset so let's just blast them as-is. We also know that they + * fit in 32 bits + */ + reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000); + pci_write_config_dword(dev, PCI_MEMORY_BASE, reg); + pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0); + pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0); + pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie); diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c index db20de512f3..e49d07f3d54 100644 --- a/arch/powerpc/platforms/powermac/pfunc_base.c +++ b/arch/powerpc/platforms/powermac/pfunc_base.c @@ -4,6 +4,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/spinlock.h> +#include <linux/of_irq.h> #include <asm/pmac_feature.h> #include <asm/pmac_pfunc.h> @@ -50,13 +51,13 @@ static int macio_do_gpio_write(PMF_STD_ARGS, u8 value, u8 mask) value = ~value; /* Toggle the GPIO */ - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); tmp = readb(addr); tmp = (tmp & ~mask) | (value & mask); DBG("Do write 0x%02x to GPIO %s (%p)\n", tmp, func->node->full_name, addr); writeb(tmp, addr); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -145,9 +146,9 @@ static int macio_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) struct macio_chip *macio = func->driver_data; unsigned long flags; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); MACIO_OUT32(offset, (MACIO_IN32(offset) & ~mask) | (value & mask)); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -168,9 +169,9 @@ static int macio_do_write_reg8(PMF_STD_ARGS, u32 offset, u8 value, u8 mask) struct macio_chip *macio = func->driver_data; unsigned long flags; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); MACIO_OUT8(offset, (MACIO_IN8(offset) & ~mask) | (value & mask)); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -223,12 +224,12 @@ static int macio_do_write_reg32_slm(PMF_STD_ARGS, u32 offset, u32 shift, if (args == NULL || args->count == 0) return -EINVAL; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); tmp = MACIO_IN32(offset); val = args->u[0].v << shift; tmp = (tmp & ~mask) | (val & mask); MACIO_OUT32(offset, tmp); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -243,12 +244,12 @@ static int macio_do_write_reg8_slm(PMF_STD_ARGS, u32 offset, u32 shift, if (args == NULL || args->count == 0) return -EINVAL; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); tmp = MACIO_IN8(offset); val = args->u[0].v << shift; tmp = (tmp & ~mask) | (val & mask); MACIO_OUT8(offset, tmp); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -278,12 +279,12 @@ static int unin_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) { unsigned long flags; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); /* This is fairly bogus in darwin, but it should work for our needs * implemeted that way: */ UN_OUT(offset, (UN_IN(offset) & ~mask) | (value & mask)); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index 85434231ae1..43075081721 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -5,14 +5,13 @@ * FIXME: LOCKING !!! */ -#include <linux/init.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/spinlock.h> +#include <linux/slab.h> #include <linux/module.h> #include <linux/mutex.h> -#include <asm/semaphore.h> #include <asm/prom.h> #include <asm/pmac_pfunc.h> @@ -686,7 +685,7 @@ static int pmf_add_functions(struct pmf_device *dev, void *driverdata) int count = 0; for (pp = dev->node->properties; pp != 0; pp = pp->next) { - char *name; + const char *name; if (strncmp(pp->name, PP_PREFIX, plen) != 0) continue; name = pp->name + plen; @@ -837,21 +836,24 @@ struct pmf_function *__pmf_find_function(struct device_node *target, return NULL; find_it: dev = pmf_find_device(actor); - if (dev == NULL) - return NULL; + if (dev == NULL) { + result = NULL; + goto out; + } list_for_each_entry(func, &dev->functions, link) { if (name && strcmp(name, func->name)) continue; - if (func->phandle && target->node != func->phandle) + if (func->phandle && target->phandle != func->phandle) continue; if ((func->flags & flags) == 0) continue; result = func; break; } - of_node_put(actor); pmf_put_device(dev); +out: + of_node_put(actor); return result; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 829b8b02527..4c24bf60d39 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -21,10 +21,9 @@ #include <linux/signal.h> #include <linux/pci.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/adb.h> #include <linux/pmu.h> -#include <linux/module.h> #include <asm/sections.h> #include <asm/io.h> @@ -34,16 +33,10 @@ #include <asm/time.h> #include <asm/pmac_feature.h> #include <asm/mpic.h> +#include <asm/xmon.h> #include "pmac.h" -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include <linux/interrupt.h> (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *); - #ifdef CONFIG_PPC32 struct pmac_irq_hw { unsigned int event; @@ -52,24 +45,23 @@ struct pmac_irq_hw { unsigned int level; }; +/* Workaround flags for 32bit powermac machines */ +unsigned int of_irq_workarounds; +struct device_node *of_irq_dflt_pic; + /* Default addresses */ static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4]; -#define GC_LEVEL_MASK 0x3ff00000 -#define OHARE_LEVEL_MASK 0x1ff00000 -#define HEATHROW_LEVEL_MASK 0x1ff00000 - static int max_irqs; static int max_real_irqs; -static u32 level_mask[4]; -static DEFINE_SPINLOCK(pmac_pic_lock); +static DEFINE_RAW_SPINLOCK(pmac_pic_lock); -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +/* The max irq number this driver deals with is 128; see max_irqs */ +static DECLARE_BITMAP(ppc_lost_interrupts, 128); +static DECLARE_BITMAP(ppc_cached_irq_mask, 128); static int pmac_irq_cascade = -1; -static struct irq_host *pmac_pic_host; +static struct irq_domain *pmac_pic_host; static void __pmac_retrigger(unsigned int irq_nr) { @@ -84,14 +76,14 @@ static void __pmac_retrigger(unsigned int irq_nr) } } -static void pmac_mask_and_ack_irq(unsigned int virq) +static void pmac_mask_and_ack_irq(struct irq_data *d) { - unsigned int src = irq_map[virq].hwirq; + unsigned int src = irqd_to_hwirq(d); unsigned long bit = 1UL << (src & 0x1f); int i = src >> 5; unsigned long flags; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); __clear_bit(src, ppc_cached_irq_mask); if (__test_and_clear_bit(src, ppc_lost_interrupts)) atomic_dec(&ppc_n_lost_interrupts); @@ -103,22 +95,22 @@ static void pmac_mask_and_ack_irq(unsigned int virq) mb(); } while((in_le32(&pmac_irq_hw[i]->enable) & bit) != (ppc_cached_irq_mask[i] & bit)); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); } -static void pmac_ack_irq(unsigned int virq) +static void pmac_ack_irq(struct irq_data *d) { - unsigned int src = irq_map[virq].hwirq; + unsigned int src = irqd_to_hwirq(d); unsigned long bit = 1UL << (src & 0x1f); int i = src >> 5; unsigned long flags; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); if (__test_and_clear_bit(src, ppc_lost_interrupts)) atomic_dec(&ppc_n_lost_interrupts); out_le32(&pmac_irq_hw[i]->ack, bit); (void)in_le32(&pmac_irq_hw[i]->ack); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); } static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) @@ -151,63 +143,63 @@ static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) /* When an irq gets requested for the first client, if it's an * edge interrupt, we clear any previous one on the controller */ -static unsigned int pmac_startup_irq(unsigned int virq) +static unsigned int pmac_startup_irq(struct irq_data *d) { unsigned long flags; - unsigned int src = irq_map[virq].hwirq; + unsigned int src = irqd_to_hwirq(d); unsigned long bit = 1UL << (src & 0x1f); int i = src >> 5; - spin_lock_irqsave(&pmac_pic_lock, flags); - if ((irq_desc[virq].status & IRQ_LEVEL) == 0) + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + if (!irqd_is_level_type(d)) out_le32(&pmac_irq_hw[i]->ack, bit); __set_bit(src, ppc_cached_irq_mask); __pmac_set_irq_mask(src, 0); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); return 0; } -static void pmac_mask_irq(unsigned int virq) +static void pmac_mask_irq(struct irq_data *d) { unsigned long flags; - unsigned int src = irq_map[virq].hwirq; + unsigned int src = irqd_to_hwirq(d); - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); __clear_bit(src, ppc_cached_irq_mask); __pmac_set_irq_mask(src, 1); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); } -static void pmac_unmask_irq(unsigned int virq) +static void pmac_unmask_irq(struct irq_data *d) { unsigned long flags; - unsigned int src = irq_map[virq].hwirq; + unsigned int src = irqd_to_hwirq(d); - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); __set_bit(src, ppc_cached_irq_mask); __pmac_set_irq_mask(src, 0); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); } -static int pmac_retrigger(unsigned int virq) +static int pmac_retrigger(struct irq_data *d) { unsigned long flags; - spin_lock_irqsave(&pmac_pic_lock, flags); - __pmac_retrigger(irq_map[virq].hwirq); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + __pmac_retrigger(irqd_to_hwirq(d)); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); return 1; } static struct irq_chip pmac_pic = { - .typename = " PMAC-PIC ", - .startup = pmac_startup_irq, - .mask = pmac_mask_irq, - .ack = pmac_ack_irq, - .mask_ack = pmac_mask_and_ack_irq, - .unmask = pmac_unmask_irq, - .retrigger = pmac_retrigger, + .name = "PMAC-PIC", + .irq_startup = pmac_startup_irq, + .irq_mask = pmac_mask_irq, + .irq_ack = pmac_ack_irq, + .irq_mask_ack = pmac_mask_and_ack_irq, + .irq_unmask = pmac_unmask_irq, + .irq_retrigger = pmac_retrigger, }; static irqreturn_t gatwick_action(int cpl, void *dev_id) @@ -216,22 +208,21 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id) int irq, bits; int rc = IRQ_NONE; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; - /* We must read level interrupts from the level register */ - bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); + bits |= in_le32(&pmac_irq_hw[i]->level); bits &= ppc_cached_irq_mask[i]; if (bits == 0) continue; irq += __ilog2(bits); - spin_unlock_irqrestore(&pmac_pic_lock, flags); - __do_IRQ(irq); - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); + generic_handle_irq(irq); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); rc = IRQ_HANDLED; } - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); return rc; } @@ -241,28 +232,24 @@ static unsigned int pmac_pic_get_irq(void) unsigned long bits = 0; unsigned long flags; -#ifdef CONFIG_SMP - void psurge_smp_message_recv(void); - - /* IPI's are a hack on the powersurge -- Cort */ - if ( smp_processor_id() != 0 ) { - psurge_smp_message_recv(); - return NO_IRQ_IGNORE; /* ignore, already handled */ +#ifdef CONFIG_PPC_PMAC32_PSURGE + /* IPI's are a hack on the powersurge -- Cort */ + if (smp_processor_id() != 0) { + return psurge_secondary_virq; } -#endif /* CONFIG_SMP */ - spin_lock_irqsave(&pmac_pic_lock, flags); +#endif /* CONFIG_PPC_PMAC32_PSURGE */ + raw_spin_lock_irqsave(&pmac_pic_lock, flags); for (irq = max_real_irqs; (irq -= 32) >= 0; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; - /* We must read level interrupts from the level register */ - bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); + bits |= in_le32(&pmac_irq_hw[i]->level); bits &= ppc_cached_irq_mask[i]; if (bits == 0) continue; irq += __ilog2(bits); break; } - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); if (unlikely(irq < 0)) return NO_IRQ; return irq_linear_revmap(pmac_pic_host, irq); @@ -272,59 +259,39 @@ static unsigned int pmac_pic_get_irq(void) static struct irqaction xmon_action = { .handler = xmon_irq, .flags = 0, - .mask = CPU_MASK_NONE, .name = "NMI - XMON" }; #endif static struct irqaction gatwick_cascade_action = { .handler = gatwick_action, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, .name = "cascade", }; -static int pmac_pic_host_match(struct irq_host *h, struct device_node *node) +static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node) { /* We match all, we don't always have a node anyway */ return 1; } -static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, +static int pmac_pic_host_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { - struct irq_desc *desc = get_irq_desc(virq); - int level; - if (hw >= max_irqs) return -EINVAL; /* Mark level interrupts, set delayed disable for edge ones and set * handlers */ - level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f))); - if (level) - desc->status |= IRQ_LEVEL; - set_irq_chip_and_handler(virq, &pmac_pic, level ? - handle_level_irq : handle_edge_irq); + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &pmac_pic, handle_level_irq); return 0; } -static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, - unsigned int *out_flags) - -{ - *out_flags = IRQ_TYPE_NONE; - *out_hwirq = *intspec; - return 0; -} - -static struct irq_host_ops pmac_pic_host_ops = { +static const struct irq_domain_ops pmac_pic_host_ops = { .match = pmac_pic_host_match, .map = pmac_pic_host_map, - .xlate = pmac_pic_host_xlate, + .xlate = irq_domain_xlate_onecell, }; static void __init pmac_pic_probe_oldstyle(void) @@ -344,21 +311,14 @@ static void __init pmac_pic_probe_oldstyle(void) if ((master = of_find_node_by_name(NULL, "gc")) != NULL) { max_irqs = max_real_irqs = 32; - level_mask[0] = GC_LEVEL_MASK; } else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) { max_irqs = max_real_irqs = 32; - level_mask[0] = OHARE_LEVEL_MASK; - /* We might have a second cascaded ohare */ slave = of_find_node_by_name(NULL, "pci106b,7"); - if (slave) { + if (slave) max_irqs = 64; - level_mask[1] = OHARE_LEVEL_MASK; - } } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) { max_irqs = max_real_irqs = 64; - level_mask[0] = HEATHROW_LEVEL_MASK; - level_mask[1] = 0; /* We might have a second cascaded heathrow */ slave = of_find_node_by_name(master, "mac-io"); @@ -373,20 +333,16 @@ static void __init pmac_pic_probe_oldstyle(void) } /* We found a slave */ - if (slave) { + if (slave) max_irqs = 128; - level_mask[2] = HEATHROW_LEVEL_MASK; - level_mask[3] = 0; - } } BUG_ON(master == NULL); /* * Allocate an irq host */ - pmac_pic_host = irq_alloc_host(master, IRQ_HOST_MAP_LINEAR, max_irqs, - &pmac_pic_host_ops, - max_irqs); + pmac_pic_host = irq_domain_add_linear(master, max_irqs, + &pmac_pic_host_ops, NULL); BUG_ON(pmac_pic_host == NULL); irq_set_default_host(pmac_pic_host); @@ -436,17 +392,43 @@ static void __init pmac_pic_probe_oldstyle(void) setup_irq(irq_create_mapping(NULL, 20), &xmon_action); #endif } -#endif /* CONFIG_PPC32 */ -static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc) +int of_irq_parse_oldworld(struct device_node *device, int index, + struct of_phandle_args *out_irq) { - struct mpic *mpic = desc->handler_data; + const u32 *ints = NULL; + int intlen; + + /* + * Old machines just have a list of interrupt numbers + * and no interrupt-controller nodes. We also have dodgy + * cases where the APPL,interrupts property is completely + * missing behind pci-pci bridges and we have to get it + * from the parent (the bridge itself, as apple just wired + * everything together on these) + */ + while (device) { + ints = of_get_property(device, "AAPL,interrupts", &intlen); + if (ints != NULL) + break; + device = device->parent; + if (device && strcmp(device->type, "pci") != 0) + break; + } + if (ints == NULL) + return -EINVAL; + intlen /= sizeof(u32); + + if (index >= intlen) + return -EINVAL; - unsigned int cascade_irq = mpic_get_one_irq(mpic); - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); - desc->chip->eoi(irq); + out_irq->np = NULL; + out_irq->args[0] = ints[index]; + out_irq->args_count = 1; + + return 0; } +#endif /* CONFIG_PPC32 */ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) { @@ -470,18 +452,11 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, int master) { const char *name = master ? " MPIC 1 " : " MPIC 2 "; - struct resource r; struct mpic *mpic; - unsigned int flags = master ? MPIC_PRIMARY : 0; - int rc; - - rc = of_address_to_resource(np, 0, &r); - if (rc) - return NULL; + unsigned int flags = master ? 0 : MPIC_SECONDARY; pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); - flags |= MPIC_WANTS_RESET; if (of_get_property(np, "big-endian", NULL)) flags |= MPIC_BIG_ENDIAN; @@ -491,7 +466,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, if (master && (flags & MPIC_BIG_ENDIAN)) flags |= MPIC_U3_HT_IRQS; - mpic = mpic_alloc(np, r.start, flags, 0, 0, name); + mpic = mpic_alloc(np, 0, flags, 0, 0, name); if (mpic == NULL) return NULL; @@ -504,7 +479,6 @@ static int __init pmac_pic_probe_mpic(void) { struct mpic *mpic1, *mpic2; struct device_node *np, *master = NULL, *slave = NULL; - unsigned int cascade; /* We can have up to 2 MPICs cascaded */ for (np = NULL; (np = of_find_node_by_type(np, "open-pic")) @@ -540,46 +514,53 @@ static int __init pmac_pic_probe_mpic(void) of_node_put(master); - /* No slave, let's go out */ - if (slave == NULL) - return 0; - - /* Get/Map slave interrupt */ - cascade = irq_of_parse_and_map(slave, 0); - if (cascade == NO_IRQ) { - printk(KERN_ERR "Failed to map cascade IRQ\n"); - return 0; - } - - mpic2 = pmac_setup_one_mpic(slave, 0); - if (mpic2 == NULL) { - printk(KERN_ERR "Failed to setup slave MPIC\n"); + /* Set up a cascaded controller, if present */ + if (slave) { + mpic2 = pmac_setup_one_mpic(slave, 0); + if (mpic2 == NULL) + printk(KERN_ERR "Failed to setup slave MPIC\n"); of_node_put(slave); - return 0; } - set_irq_data(cascade, mpic2); - set_irq_chained_handler(cascade, pmac_u3_cascade); - of_node_put(slave); return 0; } void __init pmac_pic_init(void) { - unsigned int flags = 0; - /* We configure the OF parsing based on our oldworld vs. newworld - * platform type and wether we were booted by BootX. + * platform type and whether we were booted by BootX. */ #ifdef CONFIG_PPC32 if (!pmac_newworld) - flags |= OF_IMAP_OLDWORLD_MAC; + of_irq_workarounds |= OF_IMAP_OLDWORLD_MAC; if (of_get_property(of_chosen, "linux,bootx", NULL) != NULL) - flags |= OF_IMAP_NO_PHANDLE; -#endif /* CONFIG_PPC_32 */ + of_irq_workarounds |= OF_IMAP_NO_PHANDLE; - of_irq_map_init(flags); + /* If we don't have phandles on a newworld, then try to locate a + * default interrupt controller (happens when booting with BootX). + * We do a first match here, hopefully, that only ever happens on + * machines with one controller. + */ + if (pmac_newworld && (of_irq_workarounds & OF_IMAP_NO_PHANDLE)) { + struct device_node *np; + + for_each_node_with_property(np, "interrupt-controller") { + /* Skip /chosen/interrupt-controller */ + if (strcmp(np->name, "chosen") == 0) + continue; + /* It seems like at least one person wants + * to use BootX on a machine with an AppleKiwi + * controller which happens to pretend to be an + * interrupt controller too. */ + if (strcmp(np->name, "AppleKiwi") == 0) + continue; + /* I think we found one ! */ + of_irq_dflt_pic = np; + break; + } + } +#endif /* CONFIG_PPC32 */ /* We first try to detect Apple's new Core99 chipset, since mac-io * is quite different on those machines and contains an IBM MPIC2. @@ -617,14 +598,14 @@ static int pmacpic_find_viaint(void) np = of_find_node_by_name(NULL, "via-pmu"); if (np == NULL) goto not_found; - viaint = irq_of_parse_and_map(np, 0);; + viaint = irq_of_parse_and_map(np, 0); not_found: #endif /* CONFIG_ADB_PMU */ return viaint; } -static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) +static int pmacpic_suspend(void) { int viaint = pmacpic_find_viaint(); @@ -645,7 +626,7 @@ static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) return 0; } -static int pmacpic_resume(struct sys_device *sysdev) +static void pmacpic_resume(void) { int i; @@ -655,40 +636,21 @@ static int pmacpic_resume(struct sys_device *sysdev) mb(); for (i = 0; i < max_real_irqs; ++i) if (test_bit(i, sleep_save_mask)) - pmac_unmask_irq(i); - - return 0; + pmac_unmask_irq(irq_get_irq_data(i)); } -#endif /* CONFIG_PM && CONFIG_PPC32 */ - -static struct sysdev_class pmacpic_sysclass = { - .name = "pmac_pic", -}; - -static struct sys_device device_pmacpic = { - .id = 0, - .cls = &pmacpic_sysclass, -}; - -static struct sysdev_driver driver_pmacpic = { -#if defined(CONFIG_PM) && defined(CONFIG_PPC32) - .suspend = &pmacpic_suspend, - .resume = &pmacpic_resume, -#endif /* CONFIG_PM && CONFIG_PPC32 */ +static struct syscore_ops pmacpic_syscore_ops = { + .suspend = pmacpic_suspend, + .resume = pmacpic_resume, }; -static int __init init_pmacpic_sysfs(void) +static int __init init_pmacpic_syscore(void) { -#ifdef CONFIG_PPC32 - if (max_irqs == 0) - return -ENODEV; -#endif - printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); - sysdev_class_register(&pmacpic_sysclass); - sysdev_register(&device_pmacpic); - sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic); + if (pmac_irq_hw[0]) + register_syscore_ops(&pmacpic_syscore_ops); return 0; } -machine_subsys_initcall(powermac, init_pmacpic_sysfs); +machine_subsys_initcall(powermac, init_pmacpic_syscore); + +#endif /* CONFIG_PM && CONFIG_PPC32 */ diff --git a/arch/powerpc/platforms/powermac/pic.h b/arch/powerpc/platforms/powermac/pic.h deleted file mode 100644 index c44c89f5e53..00000000000 --- a/arch/powerpc/platforms/powermac/pic.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __PPC_PLATFORMS_PMAC_PIC_H -#define __PPC_PLATFORMS_PMAC_PIC_H - -#include <linux/irq.h> - -extern struct hw_interrupt_type pmac_pic; - -extern void pmac_pic_init(void); -extern int pmac_get_irq(void); - -#endif /* __PPC_PLATFORMS_PMAC_PIC_H */ diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index b3abaaf61eb..8327cce2bdb 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -2,7 +2,6 @@ #define __PMAC_H__ #include <linux/pci.h> -#include <linux/ide.h> #include <linux/irq.h> /* @@ -34,10 +33,8 @@ extern void pmac_setup_pci_dma(void); extern void pmac_check_ht_link(void); extern void pmac_setup_smp(void); - -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); +extern int psurge_secondary_virq; +extern void low_cpu_die(void) __attribute__((noreturn)); extern int pmac_nvram_init(void); extern void pmac_pic_init(void); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 36ff1b6b7fa..141f8899a63 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -31,9 +31,8 @@ #include <linux/stddef.h> #include <linux/unistd.h> #include <linux/ptrace.h> -#include <linux/slab.h> +#include <linux/export.h> #include <linux/user.h> -#include <linux/a.out.h> #include <linux/tty.h> #include <linux/string.h> #include <linux/delay.h> @@ -53,14 +52,13 @@ #include <linux/suspend.h> #include <linux/of_device.h> #include <linux/of_platform.h> +#include <linux/memblock.h> #include <asm/reg.h> #include <asm/sections.h> #include <asm/prom.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <asm/io.h> -#include <asm/kexec.h> #include <asm/pci-bridge.h> #include <asm/ohare.h> #include <asm/mediabay.h> @@ -74,7 +72,6 @@ #include <asm/iommu.h> #include <asm/smu.h> #include <asm/pmc.h> -#include <asm/lmb.h> #include <asm/udbg.h> #include "pmac.h" @@ -97,8 +94,6 @@ extern struct machdep_calls pmac_md; int sccdbg; #endif -extern void zs_kgdb_hook(int tty_num); - sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; EXPORT_SYMBOL(sys_ctrler); @@ -107,11 +102,6 @@ unsigned long smu_cmdbuf_abs; EXPORT_SYMBOL(smu_cmdbuf_abs); #endif -#ifdef CONFIG_SMP -extern struct smp_ops_t psurge_smp_ops; -extern struct smp_ops_t core99_smp_ops; -#endif /* CONFIG_SMP */ - static void pmac_show_cpuinfo(struct seq_file *m) { struct device_node *np; @@ -313,9 +303,7 @@ static void __init pmac_setup_arch(void) } /* See if newworld or oldworld */ - for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; ) - if (of_get_property(ic, "interrupt-controller", NULL)) - break; + ic = of_find_node_with_property(NULL, "interrupt-controller"); if (ic) { pmac_newworld = 1; of_node_put(ic); @@ -329,15 +317,12 @@ static void __init pmac_setup_arch(void) l2cr_init(); #endif /* CONFIG_PPC32 */ -#ifdef CONFIG_KGDB - zs_kgdb_hook(0); -#endif - find_via_cuda(); find_via_pmu(); smu_init(); -#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64) +#if defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) || \ + defined(CONFIG_PPC64) pmac_nvram_init(); #endif @@ -350,34 +335,6 @@ static void __init pmac_setup_arch(void) ROOT_DEV = DEFAULT_ROOT_DEVICE; #endif -#ifdef CONFIG_SMP - /* Check for Core99 */ - ic = of_find_node_by_name(NULL, "uni-n"); - if (!ic) - ic = of_find_node_by_name(NULL, "u3"); - if (!ic) - ic = of_find_node_by_name(NULL, "u4"); - if (ic) { - of_node_put(ic); - smp_ops = &core99_smp_ops; - } -#ifdef CONFIG_PPC32 - else { - /* - * We have to set bits in cpu_possible_map here since the - * secondary CPU(s) aren't in the device tree, and - * setup_per_cpu_areas only allocates per-cpu data for - * CPUs in the cpu_possible_map. - */ - int cpu; - - for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) - cpu_set(cpu, cpu_possible_map); - smp_ops = &psurge_smp_ops; - } -#endif -#endif /* CONFIG_SMP */ - #ifdef CONFIG_ADB if (strstr(cmd_line, "adb_sync")) { extern int __adb_probe_sync; @@ -398,9 +355,6 @@ static int initializing = 1; static int pmac_late_init(void) { initializing = 0; - /* this is udbg (which is __init) and we can later use it during - * cpu hotplug (in smp_core99_kick_cpu) */ - ppc_md.progress = NULL; return 0; } machine_late_initcall(powermac, pmac_late_init); @@ -521,6 +475,14 @@ static void __init pmac_init_early(void) #ifdef CONFIG_PPC64 iommu_init_early_dart(); #endif + + /* SMP Init has to be done early as we need to patch up + * cpu_possible_mask before interrupt stacks are allocated + * or kaboom... + */ +#ifdef CONFIG_SMP + pmac_setup_smp(); +#endif } static int __init pmac_declare_of_platform_devices(void) @@ -531,21 +493,106 @@ static int __init pmac_declare_of_platform_devices(void) return -1; np = of_find_node_by_name(NULL, "valkyrie"); - if (np) + if (np) { of_platform_device_create(np, "valkyrie", NULL); + of_node_put(np); + } np = of_find_node_by_name(NULL, "platinum"); - if (np) + if (np) { of_platform_device_create(np, "platinum", NULL); + of_node_put(np); + } np = of_find_node_by_type(NULL, "smu"); if (np) { of_platform_device_create(np, "smu", NULL); of_node_put(np); } + np = of_find_node_by_type(NULL, "fcu"); + if (np == NULL) { + /* Some machines have strangely broken device-tree */ + np = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/fan@15e"); + } + if (np) { + of_platform_device_create(np, "temperature", NULL); + of_node_put(np); + } return 0; } machine_device_initcall(powermac, pmac_declare_of_platform_devices); +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE +/* + * This is called very early, as part of console_init() (typically just after + * time_init()). This function is respondible for trying to find a good + * default console on serial ports. It tries to match the open firmware + * default output with one of the available serial console drivers. + */ +static int __init check_pmac_serial_console(void) +{ + struct device_node *prom_stdout = NULL; + int offset = 0; + const char *name; +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS + char *devname = "ttyS"; +#else + char *devname = "ttyPZ"; +#endif + + pr_debug(" -> check_pmac_serial_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(boot_command_line, "console=")) { + pr_debug(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + pr_debug(" of_chosen is NULL !\n"); + return -ENODEV; + } + + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + pr_debug(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + pr_debug(" can't find stdout package %s !\n", name); + return -ENODEV; + } + pr_debug("stdout is %s\n", prom_stdout->full_name); + + name = of_get_property(prom_stdout, "name", NULL); + if (!name) { + pr_debug(" stdout package has no name !\n"); + goto not_found; + } + + if (strcmp(name, "ch-a") == 0) + offset = 0; + else if (strcmp(name, "ch-b") == 0) + offset = 1; + else + goto not_found; + of_node_put(prom_stdout); + + pr_debug("Found serial console at %s%d\n", devname, offset); + + return add_preferred_console(devname, offset, NULL); + + not_found: + pr_debug("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(check_pmac_serial_console); + +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + /* * Called very early, MMU is off, device-tree isn't unflattened */ @@ -574,14 +621,6 @@ static int __init pmac_probe(void) ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 1; DMA_MODE_WRITE = 2; - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; - ppc_ide_md.default_io_base = pmac_ide_get_base; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ - #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PMAC_SMU @@ -590,7 +629,7 @@ static int __init pmac_probe(void) * driver needs that. We have to allocate it now. We allocate 4k * (1 small page) for now. */ - smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL); + smu_cmdbuf_abs = memblock_alloc_base(4096, 4096, 0x80000000UL); #endif /* CONFIG_PMAC_SMU */ return 1; @@ -600,7 +639,7 @@ static int __init pmac_probe(void) /* Move that to pci.c */ static int pmac_pci_probe_mode(struct pci_bus *bus) { - struct device_node *node = bus->sysdata; + struct device_node *node = pci_bus_to_OF_node(bus); /* We need to use normal PCI probing for the AGP bus, * since the device for the AGP bridge isn't in the tree. @@ -612,51 +651,6 @@ static int pmac_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; return PCI_PROBE_DEVTREE; } - -#ifdef CONFIG_HOTPLUG_CPU -/* access per cpu vars from generic smp.c */ -DECLARE_PER_CPU(int, cpu_state); - -static void pmac_cpu_die(void) -{ - /* - * turn off as much as possible, we'll be - * kicked out as this will only be invoked - * on core99 platforms for now ... - */ - - printk(KERN_INFO "CPU#%d offline\n", smp_processor_id()); - __get_cpu_var(cpu_state) = CPU_DEAD; - smp_wmb(); - - /* - * during the path that leads here preemption is disabled, - * reenable it now so that when coming up preempt count is - * zero correctly - */ - preempt_enable(); - - /* - * hard-disable interrupts for the non-NAP case, the NAP code - * needs to re-enable interrupts (but soft-disables them) - */ - hard_irq_disable(); - - while (1) { - /* let's not take timer interrupts too often ... */ - set_dec(0x7fffffff); - - /* should always be true at this point */ - if (cpu_has_feature(CPU_FTR_CAN_NAP)) - power4_cpu_offline_powersave(); - else { - HMT_low(); - HMT_very_low(); - } - } -} -#endif /* CONFIG_HOTPLUG_CPU */ - #endif /* CONFIG_PPC64 */ define_machine(powermac) { @@ -682,18 +676,10 @@ define_machine(powermac) { .pci_probe_mode = pmac_pci_probe_mode, .power_save = power4_idle, .enable_pmcs = power4_enable_pmcs, -#ifdef CONFIG_KEXEC - .machine_kexec = default_machine_kexec, - .machine_kexec_prepare = default_machine_kexec_prepare, - .machine_crash_shutdown = default_machine_crash_shutdown, -#endif #endif /* CONFIG_PPC64 */ #ifdef CONFIG_PPC32 .pcibios_enable_device_hook = pmac_pci_enable_device_hook, .pcibios_after_init = pmac_pcibios_after_init, .phys_mem_access_prot = pci_phys_mem_access_prot, #endif -#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64) - .cpu_die = pmac_cpu_die, -#endif }; diff --git a/arch/powerpc/platforms/powermac/sleep.S b/arch/powerpc/platforms/powermac/sleep.S index adee28da353..1c2802fabd5 100644 --- a/arch/powerpc/platforms/powermac/sleep.S +++ b/arch/powerpc/platforms/powermac/sleep.S @@ -17,6 +17,7 @@ #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#include <asm/mmu.h> #define MAGIC 0x4c617273 /* 'Lars' */ @@ -323,7 +324,7 @@ grackle_wake_up: lwz r4,SL_IBAT3+4(r1) mtibatl 3,r4 -BEGIN_FTR_SECTION +BEGIN_MMU_FTR_SECTION li r4,0 mtspr SPRN_DBAT4U,r4 mtspr SPRN_DBAT4L,r4 @@ -341,7 +342,7 @@ BEGIN_FTR_SECTION mtspr SPRN_IBAT6L,r4 mtspr SPRN_IBAT7U,r4 mtspr SPRN_IBAT7L,r4 -END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) /* Flush all TLBs */ lis r4,0x1000 diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index cb2d894541c..5cbd4d67d5c 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -35,7 +35,8 @@ #include <linux/compiler.h> #include <asm/ptrace.h> -#include <asm/atomic.h> +#include <linux/atomic.h> +#include <asm/code-patching.h> #include <asm/irq.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -52,7 +53,9 @@ #include <asm/pmac_low_i2c.h> #include <asm/pmac_pfunc.h> -#define DEBUG +#include "pmac.h" + +#undef DEBUG #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -63,10 +66,11 @@ extern void __secondary_start_pmac_0(void); extern int pmac_pfunc_base_install(void); -#ifdef CONFIG_PPC32 +static void (*pmac_tb_freeze)(int freeze); +static u64 timebase; +static int tb_req; -/* Sync flag for HW tb sync */ -static volatile int sec_tb_reset = 0; +#ifdef CONFIG_PPC_PMAC32_PSURGE /* * Powersurge (old powermac SMP) support. @@ -120,6 +124,10 @@ static volatile u32 __iomem *psurge_start; /* what sort of powersurge board we have */ static int psurge_type = PSURGE_NONE; +/* irq for secondary cpus to report */ +static struct irq_domain *psurge_host; +int psurge_secondary_virq; + /* * Set and clear IPIs for powersurge. */ @@ -152,51 +160,51 @@ static inline void psurge_clr_ipi(int cpu) /* * On powersurge (old SMP powermac architecture) we don't have * separate IPIs for separate messages like openpic does. Instead - * we have a bitmap for each processor, where a 1 bit means that - * the corresponding message is pending for that processor. - * Ideally each cpu's entry would be in a different cache line. + * use the generic demux helpers * -- paulus. */ -static unsigned long psurge_smp_message[NR_CPUS]; - -void psurge_smp_message_recv(void) +static irqreturn_t psurge_ipi_intr(int irq, void *d) { - int cpu = smp_processor_id(); - int msg; - - /* clear interrupt */ - psurge_clr_ipi(cpu); + psurge_clr_ipi(smp_processor_id()); + smp_ipi_demux(); - if (num_online_cpus() < 2) - return; + return IRQ_HANDLED; +} - /* make sure there is a message there */ - for (msg = 0; msg < 4; msg++) - if (test_and_clear_bit(msg, &psurge_smp_message[cpu])) - smp_message_recv(msg); +static void smp_psurge_cause_ipi(int cpu, unsigned long data) +{ + psurge_set_ipi(cpu); } -irqreturn_t psurge_primary_intr(int irq, void *d) +static int psurge_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) { - psurge_smp_message_recv(); - return IRQ_HANDLED; + irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_percpu_irq); + + return 0; } -static void smp_psurge_message_pass(int target, int msg) +static const struct irq_domain_ops psurge_host_ops = { + .map = psurge_host_map, +}; + +static int psurge_secondary_ipi_init(void) { - int i; + int rc = -ENOMEM; - if (num_online_cpus() < 2) - return; + psurge_host = irq_domain_add_nomap(NULL, ~0, &psurge_host_ops, NULL); - for_each_online_cpu(i) { - if (target == MSG_ALL - || (target == MSG_ALL_BUT_SELF && i != smp_processor_id()) - || target == i) { - set_bit(msg, &psurge_smp_message[i]); - psurge_set_ipi(i); - } - } + if (psurge_host) + psurge_secondary_virq = irq_create_direct_mapping(psurge_host); + + if (psurge_secondary_virq) + rc = request_irq(psurge_secondary_virq, psurge_ipi_intr, + IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL); + + if (rc) + pr_err("Failed to setup secondary cpu IPI\n"); + + return rc; } /* @@ -293,6 +301,9 @@ static int __init smp_psurge_probe(void) psurge_quad_init(); /* All released cards using this HW design have 4 CPUs */ ncpus = 4; + /* No sure how timebase sync works on those, let's use SW */ + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; } else { iounmap(quad_base); if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) { @@ -304,32 +315,38 @@ static int __init smp_psurge_probe(void) ncpus = 2; } + if (psurge_secondary_ipi_init()) + return 1; + psurge_start = ioremap(PSURGE_START, 4); psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); - /* - * This is necessary because OF doesn't know about the + /* This is necessary because OF doesn't know about the * secondary cpu(s), and thus there aren't nodes in the * device tree for them, and smp_setup_cpu_maps hasn't - * set their bits in cpu_possible_map and cpu_present_map. + * set their bits in cpu_present_mask. */ if (ncpus > NR_CPUS) ncpus = NR_CPUS; - for (i = 1; i < ncpus ; ++i) { - cpu_set(i, cpu_present_map); - set_hard_smp_processor_id(i, i); - } + for (i = 1; i < ncpus ; ++i) + set_cpu_present(i, true); if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); return ncpus; } -static void __init smp_psurge_kick_cpu(int nr) +static int __init smp_psurge_kick_cpu(int nr) { unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; - unsigned long a; - int i; + unsigned long a, flags; + int i, j; + + /* Defining this here is evil ... but I prefer hiding that + * crap to avoid giving people ideas that they can do the + * same. + */ + extern volatile unsigned int cpu_callin_map[NR_CPUS]; /* may need to flush here if secondary bats aren't setup */ for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32) @@ -338,108 +355,111 @@ static void __init smp_psurge_kick_cpu(int nr) if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); + /* This is going to freeze the timeebase, we disable interrupts */ + local_irq_save(flags); + out_be32(psurge_start, start); mb(); psurge_set_ipi(nr); + /* * We can't use udelay here because the timebase is now frozen. */ for (i = 0; i < 2000; ++i) - barrier(); + asm volatile("nop" : : : "memory"); psurge_clr_ipi(nr); - if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); -} - -/* - * With the dual-cpu powersurge board, the decrementers and timebases - * of both cpus are frozen after the secondary cpu is started up, - * until we give the secondary cpu another interrupt. This routine - * uses this to get the timebases synchronized. - * -- paulus. - */ -static void __init psurge_dual_sync_tb(int cpu_nr) -{ - int t; - - set_dec(tb_ticks_per_jiffy); - /* XXX fixme */ - set_tb(0, 0); - - if (cpu_nr > 0) { + /* + * Also, because the timebase is frozen, we must not return to the + * caller which will try to do udelay's etc... Instead, we wait -here- + * for the CPU to callin. + */ + for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) { + for (j = 1; j < 10000; j++) + asm volatile("nop" : : : "memory"); + asm volatile("sync" : : : "memory"); + } + if (!cpu_callin_map[nr]) + goto stuck; + + /* And we do the TB sync here too for standard dual CPU cards */ + if (psurge_type == PSURGE_DUAL) { + while(!tb_req) + barrier(); + tb_req = 0; + mb(); + timebase = get_tb(); + mb(); + while (timebase) + barrier(); mb(); - sec_tb_reset = 1; - return; } + stuck: + /* now interrupt the secondary, restarting both TBs */ + if (psurge_type == PSURGE_DUAL) + psurge_set_ipi(1); - /* wait for the secondary to have reset its TB before proceeding */ - for (t = 10000000; t > 0 && !sec_tb_reset; --t) - ; + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); - /* now interrupt the secondary, starting both TBs */ - psurge_set_ipi(1); + return 0; } static struct irqaction psurge_irqaction = { - .handler = psurge_primary_intr, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, + .handler = psurge_ipi_intr, + .flags = IRQF_PERCPU | IRQF_NO_THREAD, .name = "primary IPI", }; static void __init smp_psurge_setup_cpu(int cpu_nr) { + if (cpu_nr != 0 || !psurge_start) + return; - if (cpu_nr == 0) { - /* If we failed to start the second CPU, we should still - * send it an IPI to start the timebase & DEC or we might - * have them stuck. - */ - if (num_online_cpus() < 2) { - if (psurge_type == PSURGE_DUAL) - psurge_set_ipi(1); - return; - } - /* reset the entry point so if we get another intr we won't - * try to startup again */ - out_be32(psurge_start, 0x100); - if (setup_irq(30, &psurge_irqaction)) - printk(KERN_ERR "Couldn't get primary IPI interrupt"); - } - - if (psurge_type == PSURGE_DUAL) - psurge_dual_sync_tb(cpu_nr); + /* reset the entry point so if we get another intr we won't + * try to startup again */ + out_be32(psurge_start, 0x100); + if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction)) + printk(KERN_ERR "Couldn't get primary IPI interrupt"); } void __init smp_psurge_take_timebase(void) { - /* Dummy implementation */ + if (psurge_type != PSURGE_DUAL) + return; + + tb_req = 1; + mb(); + while (!timebase) + barrier(); + mb(); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + mb(); + set_dec(tb_ticks_per_jiffy/2); } void __init smp_psurge_give_timebase(void) { - /* Dummy implementation */ + /* Nothing to do here */ } /* PowerSurge-style Macs */ struct smp_ops_t psurge_smp_ops = { - .message_pass = smp_psurge_message_pass, + .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ + .cause_ipi = smp_psurge_cause_ipi, .probe = smp_psurge_probe, .kick_cpu = smp_psurge_kick_cpu, .setup_cpu = smp_psurge_setup_cpu, .give_timebase = smp_psurge_give_timebase, .take_timebase = smp_psurge_take_timebase, }; -#endif /* CONFIG_PPC32 - actually powersurge support */ +#endif /* CONFIG_PPC_PMAC32_PSURGE */ /* * Core 99 and later support */ -static void (*pmac_tb_freeze)(int freeze); -static u64 timebase; -static int tb_req; static void smp_core99_give_timebase(void) { @@ -464,7 +484,7 @@ static void smp_core99_give_timebase(void) } -static void __devinit smp_core99_take_timebase(void) +static void smp_core99_take_timebase(void) { unsigned long flags; @@ -478,7 +498,6 @@ static void __devinit smp_core99_take_timebase(void) set_tb(timebase >> 32, timebase & 0xffffffff); timebase = 0; mb(); - set_dec(tb_ticks_per_jiffy/2); local_irq_restore(flags); } @@ -650,7 +669,7 @@ static void smp_core99_gpio_tb_freeze(int freeze) volatile static long int core99_l2_cache; volatile static long int core99_l3_cache; -static void __devinit core99_init_caches(int cpu) +static void core99_init_caches(int cpu) { #ifndef CONFIG_PPC64 if (!cpu_has_feature(CPU_FTR_L2CR)) @@ -686,9 +705,9 @@ static void __init smp_core99_setup(int ncpus) #ifdef CONFIG_PPC64 /* i2c based HW sync on some G5s */ - if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3") || - machine_is_compatible("RackMac3,1")) + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) smp_core99_setup_i2c_hwsync(ncpus); /* pfunc based HW sync on recent G5s */ @@ -706,7 +725,7 @@ static void __init smp_core99_setup(int ncpus) #else /* CONFIG_PPC64 */ /* GPIO based HW sync on ppc32 Core99 */ - if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) { + if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) { struct device_node *cpu; const u32 *tbprop = NULL; @@ -738,12 +757,12 @@ static void __init smp_core99_setup(int ncpus) /* XXX should get this from reg properties */ for (i = 1; i < ncpus; ++i) - smp_hw_index[i] = i; + set_hard_smp_processor_id(i, i); } #endif /* 32 bits SMP can't NAP */ - if (!machine_is_compatible("MacRISC4")) + if (!of_machine_is_compatible("MacRISC4")) powersave_nap = 0; } @@ -782,15 +801,14 @@ static int __init smp_core99_probe(void) return ncpus; } -static void __devinit smp_core99_kick_cpu(int nr) +static int smp_core99_kick_cpu(int nr) { unsigned int save_vector; unsigned long target, flags; - volatile unsigned int *vector - = ((volatile unsigned int *)(KERNELBASE+0x100)); + unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100); if (nr < 0 || nr > 3) - return; + return -ENOENT; if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346); @@ -801,10 +819,10 @@ static void __devinit smp_core99_kick_cpu(int nr) save_vector = *vector; /* Setup fake reset vector that does - * b __secondary_start_pmac_0 + nr*8 - KERNELBASE + * b __secondary_start_pmac_0 + nr*8 */ target = (unsigned long) __secondary_start_pmac_0 + nr * 8; - create_branch((unsigned long)vector, target, BRANCH_SET_LINK); + patch_branch(vector, target, BRANCH_SET_LINK); /* Put some life in our friend */ pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); @@ -822,9 +840,11 @@ static void __devinit smp_core99_kick_cpu(int nr) local_irq_restore(flags); if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347); + + return 0; } -static void __devinit smp_core99_setup_cpu(int cpu_nr) +static void smp_core99_setup_cpu(int cpu_nr) { /* Setup L2/L3 */ if (cpu_nr != 0) @@ -832,92 +852,186 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) /* Setup openpic */ mpic_setup_this_cpu(); +} - if (cpu_nr == 0) { #ifdef CONFIG_PPC64 - extern void g5_phy_disable_cpu1(void); +#ifdef CONFIG_HOTPLUG_CPU +static int smp_core99_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + int rc; - /* Close i2c bus if it was used for tb sync */ + switch(action) { + case CPU_UP_PREPARE: + case CPU_UP_PREPARE_FROZEN: + /* Open i2c bus if it was used for tb sync */ if (pmac_tb_clock_chip_host) { - pmac_i2c_close(pmac_tb_clock_chip_host); - pmac_tb_clock_chip_host = NULL; + rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1); + if (rc) { + pr_err("Failed to open i2c bus for time sync\n"); + return notifier_from_errno(rc); + } } + break; + case CPU_ONLINE: + case CPU_UP_CANCELED: + /* Close i2c bus if it was used for tb sync */ + if (pmac_tb_clock_chip_host) + pmac_i2c_close(pmac_tb_clock_chip_host); + break; + default: + break; + } + return NOTIFY_OK; +} - /* If we didn't start the second CPU, we must take - * it off the bus - */ - if (machine_is_compatible("MacRISC4") && - num_online_cpus() < 2) - g5_phy_disable_cpu1(); -#endif /* CONFIG_PPC64 */ +static struct notifier_block smp_core99_cpu_nb = { + .notifier_call = smp_core99_cpu_notify, +}; +#endif /* CONFIG_HOTPLUG_CPU */ - if (ppc_md.progress) - ppc_md.progress("core99_setup_cpu 0 done", 0x349); +static void __init smp_core99_bringup_done(void) +{ + extern void g5_phy_disable_cpu1(void); + + /* Close i2c bus if it was used for tb sync */ + if (pmac_tb_clock_chip_host) + pmac_i2c_close(pmac_tb_clock_chip_host); + + /* If we didn't start the second CPU, we must take + * it off the bus. + */ + if (of_machine_is_compatible("MacRISC4") && + num_online_cpus() < 2) { + set_cpu_present(1, false); + g5_phy_disable_cpu1(); } -} +#ifdef CONFIG_HOTPLUG_CPU + register_cpu_notifier(&smp_core99_cpu_nb); +#endif + if (ppc_md.progress) + ppc_md.progress("smp_core99_bringup_done", 0x349); +} +#endif /* CONFIG_PPC64 */ -#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) +#ifdef CONFIG_HOTPLUG_CPU -int smp_core99_cpu_disable(void) +static int smp_core99_cpu_disable(void) { - cpu_clear(smp_processor_id(), cpu_online_map); + int rc = generic_cpu_disable(); + if (rc) + return rc; - /* XXX reset cpu affinity here */ mpic_cpu_set_priority(0xf); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - mb(); - udelay(20); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); + return 0; } -extern void low_cpu_die(void) __attribute__((noreturn)); /* in sleep.S */ -static int cpu_dead[NR_CPUS]; +#ifdef CONFIG_PPC32 -void cpu_die(void) +static void pmac_cpu_die(void) { + int cpu = smp_processor_id(); + local_irq_disable(); - cpu_dead[smp_processor_id()] = 1; + idle_task_exit(); + pr_debug("CPU%d offline\n", cpu); + generic_set_cpu_dead(cpu); + smp_wmb(); mb(); low_cpu_die(); } -void smp_core99_cpu_die(unsigned int cpu) +#else /* CONFIG_PPC32 */ + +static void pmac_cpu_die(void) { - int timeout; + int cpu = smp_processor_id(); - timeout = 1000; - while (!cpu_dead[cpu]) { - if (--timeout == 0) { - printk("CPU %u refused to die!\n", cpu); - break; - } - msleep(1); + local_irq_disable(); + idle_task_exit(); + + /* + * turn off as much as possible, we'll be + * kicked out as this will only be invoked + * on core99 platforms for now ... + */ + + printk(KERN_INFO "CPU#%d offline\n", cpu); + generic_set_cpu_dead(cpu); + smp_wmb(); + + /* + * Re-enable interrupts. The NAP code needs to enable them + * anyways, do it now so we deal with the case where one already + * happened while soft-disabled. + * We shouldn't get any external interrupts, only decrementer, and the + * decrementer handler is safe for use on offline CPUs + */ + local_irq_enable(); + + while (1) { + /* let's not take timer interrupts too often ... */ + set_dec(0x7fffffff); + + /* Enter NAP mode */ + power4_idle(); } - cpu_dead[cpu] = 0; } -#endif /* CONFIG_HOTPLUG_CPU && CONFIG_PP32 */ +#endif /* else CONFIG_PPC32 */ +#endif /* CONFIG_HOTPLUG_CPU */ /* Core99 Macs (dual G4s and G5s) */ struct smp_ops_t core99_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_core99_probe, +#ifdef CONFIG_PPC64 + .bringup_done = smp_core99_bringup_done, +#endif .kick_cpu = smp_core99_kick_cpu, .setup_cpu = smp_core99_setup_cpu, .give_timebase = smp_core99_give_timebase, .take_timebase = smp_core99_take_timebase, #if defined(CONFIG_HOTPLUG_CPU) -# if defined(CONFIG_PPC32) .cpu_disable = smp_core99_cpu_disable, - .cpu_die = smp_core99_cpu_die, -# endif -# if defined(CONFIG_PPC64) - .cpu_disable = generic_cpu_disable, .cpu_die = generic_cpu_die, - /* intentionally do *NOT* assign cpu_enable, - * the generic code will use kick_cpu then! */ -# endif #endif }; + +void __init pmac_setup_smp(void) +{ + struct device_node *np; + + /* Check for Core99 */ + np = of_find_node_by_name(NULL, "uni-n"); + if (!np) + np = of_find_node_by_name(NULL, "u3"); + if (!np) + np = of_find_node_by_name(NULL, "u4"); + if (np) { + of_node_put(np); + smp_ops = &core99_smp_ops; + } +#ifdef CONFIG_PPC_PMAC32_PSURGE + else { + /* We have to set bits in cpu_possible_mask here since the + * secondary CPU(s) aren't in the device tree. Various + * things won't be initialized for CPUs not in the possible + * map, so we really need to fix it up here. + */ + int cpu; + + for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) + set_cpu_possible(cpu, true); + smp_ops = &psurge_smp_ops; + } +#endif /* CONFIG_PPC_PMAC32_PSURGE */ + +#ifdef CONFIG_HOTPLUG_CPU + ppc_md.cpu_die = pmac_cpu_die; +#endif +} + + diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index bbbefd64ab5..8680bb69795 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -26,7 +26,6 @@ #include <asm/sections.h> #include <asm/prom.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/machdep.h> @@ -93,11 +92,14 @@ static void to_rtc_time(unsigned long now, struct rtc_time *tm) } #endif +#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) || \ + defined(CONFIG_PMAC_SMU) static unsigned long from_rtc_time(struct rtc_time *tm) { return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); } +#endif #ifdef CONFIG_ADB_CUDA static unsigned long cuda_get_time(void) @@ -262,13 +264,16 @@ int __init via_calibrate_decr(void) struct resource rsrc; vias = of_find_node_by_name(NULL, "via-cuda"); - if (vias == 0) + if (vias == NULL) vias = of_find_node_by_name(NULL, "via-pmu"); - if (vias == 0) + if (vias == NULL) vias = of_find_node_by_name(NULL, "via"); - if (vias == 0 || of_address_to_resource(vias, 0, &rsrc)) + if (vias == NULL || of_address_to_resource(vias, 0, &rsrc)) { + of_node_put(vias); return 0; - via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1); + } + of_node_put(vias); + via = ioremap(rsrc.start, resource_size(&rsrc)); if (via == NULL) { printk(KERN_ERR "Failed to map VIA for timer calibration !\n"); return 0; @@ -294,7 +299,7 @@ int __init via_calibrate_decr(void) ppc_tb_freq = (dstart - dend) * 100 / 6; iounmap(via); - + return 1; } #endif @@ -311,9 +316,9 @@ void __init pmac_calibrate_decr(void) * calibration. That's better since the VIA itself seems * to be slightly off. --BenH */ - if (!machine_is_compatible("MacRISC2") && - !machine_is_compatible("MacRISC3") && - !machine_is_compatible("MacRISC4")) + if (!of_machine_is_compatible("MacRISC2") && + !of_machine_is_compatible("MacRISC3") && + !of_machine_is_compatible("MacRISC4")) if (via_calibrate_decr()) return; @@ -322,7 +327,7 @@ void __init pmac_calibrate_decr(void) * probably implement calibration based on the KL timer on these * machines anyway... -BenH */ - if (machine_is_compatible("PowerMac3,5")) + if (of_machine_is_compatible("PowerMac3,5")) if (via_calibrate_decr()) return; #endif diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 47de4d3fc16..d83135a9830 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -1,5 +1,5 @@ /* - * udbg for for zilog scc ports as found on Apple PowerMacs + * udbg for zilog scc ports as found on Apple PowerMacs * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * @@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc) out_8(sccc, 0xc0); /* If SCC was the OF output port, read the BRG value, else - * Setup for 57600 8N1 + * Setup for 38400 or 57600 8N1 depending on the machine */ if (ch_def != NULL) { out_8(sccc, 13); scc_inittab[1] = in_8(sccc); out_8(sccc, 12); scc_inittab[3] = in_8(sccc); + } else if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) { + /* Xserves and G5s default to 57600 */ + scc_inittab[1] = 0; + scc_inittab[3] = 0; + } else { + /* Others default to 38400 */ + scc_inittab[1] = 0; + scc_inittab[3] = 1; } for (i = 0; i < sizeof(scc_inittab); ++i) |