diff options
Diffstat (limited to 'arch/powerpc/platforms/powermac/setup.c')
| -rw-r--r-- | arch/powerpc/platforms/powermac/setup.c | 218 |
1 files changed, 102 insertions, 116 deletions
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 36ff1b6b7fa..141f8899a63 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -31,9 +31,8 @@ #include <linux/stddef.h> #include <linux/unistd.h> #include <linux/ptrace.h> -#include <linux/slab.h> +#include <linux/export.h> #include <linux/user.h> -#include <linux/a.out.h> #include <linux/tty.h> #include <linux/string.h> #include <linux/delay.h> @@ -53,14 +52,13 @@ #include <linux/suspend.h> #include <linux/of_device.h> #include <linux/of_platform.h> +#include <linux/memblock.h> #include <asm/reg.h> #include <asm/sections.h> #include <asm/prom.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <asm/io.h> -#include <asm/kexec.h> #include <asm/pci-bridge.h> #include <asm/ohare.h> #include <asm/mediabay.h> @@ -74,7 +72,6 @@ #include <asm/iommu.h> #include <asm/smu.h> #include <asm/pmc.h> -#include <asm/lmb.h> #include <asm/udbg.h> #include "pmac.h" @@ -97,8 +94,6 @@ extern struct machdep_calls pmac_md; int sccdbg; #endif -extern void zs_kgdb_hook(int tty_num); - sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; EXPORT_SYMBOL(sys_ctrler); @@ -107,11 +102,6 @@ unsigned long smu_cmdbuf_abs; EXPORT_SYMBOL(smu_cmdbuf_abs); #endif -#ifdef CONFIG_SMP -extern struct smp_ops_t psurge_smp_ops; -extern struct smp_ops_t core99_smp_ops; -#endif /* CONFIG_SMP */ - static void pmac_show_cpuinfo(struct seq_file *m) { struct device_node *np; @@ -313,9 +303,7 @@ static void __init pmac_setup_arch(void) } /* See if newworld or oldworld */ - for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; ) - if (of_get_property(ic, "interrupt-controller", NULL)) - break; + ic = of_find_node_with_property(NULL, "interrupt-controller"); if (ic) { pmac_newworld = 1; of_node_put(ic); @@ -329,15 +317,12 @@ static void __init pmac_setup_arch(void) l2cr_init(); #endif /* CONFIG_PPC32 */ -#ifdef CONFIG_KGDB - zs_kgdb_hook(0); -#endif - find_via_cuda(); find_via_pmu(); smu_init(); -#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64) +#if defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) || \ + defined(CONFIG_PPC64) pmac_nvram_init(); #endif @@ -350,34 +335,6 @@ static void __init pmac_setup_arch(void) ROOT_DEV = DEFAULT_ROOT_DEVICE; #endif -#ifdef CONFIG_SMP - /* Check for Core99 */ - ic = of_find_node_by_name(NULL, "uni-n"); - if (!ic) - ic = of_find_node_by_name(NULL, "u3"); - if (!ic) - ic = of_find_node_by_name(NULL, "u4"); - if (ic) { - of_node_put(ic); - smp_ops = &core99_smp_ops; - } -#ifdef CONFIG_PPC32 - else { - /* - * We have to set bits in cpu_possible_map here since the - * secondary CPU(s) aren't in the device tree, and - * setup_per_cpu_areas only allocates per-cpu data for - * CPUs in the cpu_possible_map. - */ - int cpu; - - for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) - cpu_set(cpu, cpu_possible_map); - smp_ops = &psurge_smp_ops; - } -#endif -#endif /* CONFIG_SMP */ - #ifdef CONFIG_ADB if (strstr(cmd_line, "adb_sync")) { extern int __adb_probe_sync; @@ -398,9 +355,6 @@ static int initializing = 1; static int pmac_late_init(void) { initializing = 0; - /* this is udbg (which is __init) and we can later use it during - * cpu hotplug (in smp_core99_kick_cpu) */ - ppc_md.progress = NULL; return 0; } machine_late_initcall(powermac, pmac_late_init); @@ -521,6 +475,14 @@ static void __init pmac_init_early(void) #ifdef CONFIG_PPC64 iommu_init_early_dart(); #endif + + /* SMP Init has to be done early as we need to patch up + * cpu_possible_mask before interrupt stacks are allocated + * or kaboom... + */ +#ifdef CONFIG_SMP + pmac_setup_smp(); +#endif } static int __init pmac_declare_of_platform_devices(void) @@ -531,21 +493,106 @@ static int __init pmac_declare_of_platform_devices(void) return -1; np = of_find_node_by_name(NULL, "valkyrie"); - if (np) + if (np) { of_platform_device_create(np, "valkyrie", NULL); + of_node_put(np); + } np = of_find_node_by_name(NULL, "platinum"); - if (np) + if (np) { of_platform_device_create(np, "platinum", NULL); + of_node_put(np); + } np = of_find_node_by_type(NULL, "smu"); if (np) { of_platform_device_create(np, "smu", NULL); of_node_put(np); } + np = of_find_node_by_type(NULL, "fcu"); + if (np == NULL) { + /* Some machines have strangely broken device-tree */ + np = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/fan@15e"); + } + if (np) { + of_platform_device_create(np, "temperature", NULL); + of_node_put(np); + } return 0; } machine_device_initcall(powermac, pmac_declare_of_platform_devices); +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE +/* + * This is called very early, as part of console_init() (typically just after + * time_init()). This function is respondible for trying to find a good + * default console on serial ports. It tries to match the open firmware + * default output with one of the available serial console drivers. + */ +static int __init check_pmac_serial_console(void) +{ + struct device_node *prom_stdout = NULL; + int offset = 0; + const char *name; +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS + char *devname = "ttyS"; +#else + char *devname = "ttyPZ"; +#endif + + pr_debug(" -> check_pmac_serial_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(boot_command_line, "console=")) { + pr_debug(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + pr_debug(" of_chosen is NULL !\n"); + return -ENODEV; + } + + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + pr_debug(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + pr_debug(" can't find stdout package %s !\n", name); + return -ENODEV; + } + pr_debug("stdout is %s\n", prom_stdout->full_name); + + name = of_get_property(prom_stdout, "name", NULL); + if (!name) { + pr_debug(" stdout package has no name !\n"); + goto not_found; + } + + if (strcmp(name, "ch-a") == 0) + offset = 0; + else if (strcmp(name, "ch-b") == 0) + offset = 1; + else + goto not_found; + of_node_put(prom_stdout); + + pr_debug("Found serial console at %s%d\n", devname, offset); + + return add_preferred_console(devname, offset, NULL); + + not_found: + pr_debug("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(check_pmac_serial_console); + +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + /* * Called very early, MMU is off, device-tree isn't unflattened */ @@ -574,14 +621,6 @@ static int __init pmac_probe(void) ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 1; DMA_MODE_WRITE = 2; - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; - ppc_ide_md.default_io_base = pmac_ide_get_base; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ - #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PMAC_SMU @@ -590,7 +629,7 @@ static int __init pmac_probe(void) * driver needs that. We have to allocate it now. We allocate 4k * (1 small page) for now. */ - smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL); + smu_cmdbuf_abs = memblock_alloc_base(4096, 4096, 0x80000000UL); #endif /* CONFIG_PMAC_SMU */ return 1; @@ -600,7 +639,7 @@ static int __init pmac_probe(void) /* Move that to pci.c */ static int pmac_pci_probe_mode(struct pci_bus *bus) { - struct device_node *node = bus->sysdata; + struct device_node *node = pci_bus_to_OF_node(bus); /* We need to use normal PCI probing for the AGP bus, * since the device for the AGP bridge isn't in the tree. @@ -612,51 +651,6 @@ static int pmac_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; return PCI_PROBE_DEVTREE; } - -#ifdef CONFIG_HOTPLUG_CPU -/* access per cpu vars from generic smp.c */ -DECLARE_PER_CPU(int, cpu_state); - -static void pmac_cpu_die(void) -{ - /* - * turn off as much as possible, we'll be - * kicked out as this will only be invoked - * on core99 platforms for now ... - */ - - printk(KERN_INFO "CPU#%d offline\n", smp_processor_id()); - __get_cpu_var(cpu_state) = CPU_DEAD; - smp_wmb(); - - /* - * during the path that leads here preemption is disabled, - * reenable it now so that when coming up preempt count is - * zero correctly - */ - preempt_enable(); - - /* - * hard-disable interrupts for the non-NAP case, the NAP code - * needs to re-enable interrupts (but soft-disables them) - */ - hard_irq_disable(); - - while (1) { - /* let's not take timer interrupts too often ... */ - set_dec(0x7fffffff); - - /* should always be true at this point */ - if (cpu_has_feature(CPU_FTR_CAN_NAP)) - power4_cpu_offline_powersave(); - else { - HMT_low(); - HMT_very_low(); - } - } -} -#endif /* CONFIG_HOTPLUG_CPU */ - #endif /* CONFIG_PPC64 */ define_machine(powermac) { @@ -682,18 +676,10 @@ define_machine(powermac) { .pci_probe_mode = pmac_pci_probe_mode, .power_save = power4_idle, .enable_pmcs = power4_enable_pmcs, -#ifdef CONFIG_KEXEC - .machine_kexec = default_machine_kexec, - .machine_kexec_prepare = default_machine_kexec_prepare, - .machine_crash_shutdown = default_machine_crash_shutdown, -#endif #endif /* CONFIG_PPC64 */ #ifdef CONFIG_PPC32 .pcibios_enable_device_hook = pmac_pci_enable_device_hook, .pcibios_after_init = pmac_pcibios_after_init, .phys_mem_access_prot = pci_phys_mem_access_prot, #endif -#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64) - .cpu_die = pmac_cpu_die, -#endif }; |