aboutsummaryrefslogtreecommitdiff
path: root/arch/avr32/boards/atstk1000
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32/boards/atstk1000')
-rw-r--r--arch/avr32/boards/atstk1000/atstk1000.h2
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c79
-rw-r--r--arch/avr32/boards/atstk1000/atstk1003.c49
-rw-r--r--arch/avr32/boards/atstk1000/atstk1004.c34
-rw-r--r--arch/avr32/boards/atstk1000/flash.c2
-rw-r--r--arch/avr32/boards/atstk1000/setup.c8
6 files changed, 80 insertions, 94 deletions
diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
index 9392d325286..653cc09e536 100644
--- a/arch/avr32/boards/atstk1000/atstk1000.h
+++ b/arch/avr32/boards/atstk1000/atstk1000.h
@@ -10,7 +10,7 @@
#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+extern struct atmel_lcdfb_pdata atstk1000_lcdc_data;
void atstk1000_setup_j2_leds(void);
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 8538ba75ef9..6c80aba7bf9 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -16,17 +16,17 @@
#include <linux/types.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
+#include <linux/atmel-mci.h>
#include <video/atmel_lcdc.h>
#include <asm/io.h>
#include <asm/setup.h>
-#include <asm/atmel-mci.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
#include "atstk1000.h"
@@ -49,7 +49,7 @@ unsigned long at32_board_osc_rates[3] = {
*/
#ifdef CONFIG_BOARD_ATSTK1006
#include <linux/mtd/partitions.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
static struct smc_timing nand_timing __initdata = {
.ncs_read_setup = 0,
@@ -90,18 +90,14 @@ static struct mtd_partition nand_partitions[] = {
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
-
-struct atmel_nand_data atstk1006_nand_data __initdata = {
+static struct atmel_nand_data atstk1006_nand_data __initdata = {
.cle = 21,
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
+ .ecc_mode = NAND_ECC_SOFT,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(nand_partitions),
};
#endif
@@ -110,7 +106,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2] = {
+static struct macb_platform_data __initdata eth_data[2] = {
{
/*
* The MDIO pullups on STK1000 are a bit too weak for
@@ -203,7 +199,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
*/
regs = (void __iomem __force *)res->start;
pclk = clk_get(&pdev->dev, "pclk");
- if (!pclk)
+ if (IS_ERR(pclk))
return;
clk_enable(pclk);
@@ -232,7 +228,7 @@ static void __init atstk1002_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
@@ -252,28 +248,32 @@ static void __init atstk1002_setup_extdac(void)
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+
/* MMC card detect requires MACB0 *NOT* be used */
#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
- .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
- .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
-};
-#define MCI_PDATA &mci0_data
+ .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
+ .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
#else
-#define MCI_PDATA NULL
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
#endif /* SW6 for sd{cd,wp} routing */
+ },
+};
#endif /* SW2 for MMC signal routing */
@@ -283,25 +283,7 @@ static int __init atstk1002_init(void)
* ATSTK1000 uses 32-bit SDRAM interface. Reserve the
* SDRAM-specific pins so that nobody messes with them.
*/
- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
-
- at32_add_system_devices();
+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
#ifdef CONFIG_BOARD_ATSTK1006
smc_set_timing(&nand_config, &nand_timing);
@@ -325,14 +307,15 @@ static int __init atstk1002_init(void)
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
- at32_add_device_mci(0, MCI_PDATA);
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ at32_add_device_mci(0, &mci0_data);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
#else
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size, 0);
+ fbmem_start, fbmem_size,
+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
#endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index 591fc73b554..ff7e2329882 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -17,13 +17,14 @@
#include <linux/spi/at73c213.h>
#include <linux/spi/spi.h>
+#include <linux/atmel-mci.h>
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
#include "atstk1000.h"
@@ -66,6 +67,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
} };
#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+#endif
+
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1003_setup_extdac(void)
{
@@ -84,7 +95,7 @@ static void __init atstk1003_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
@@ -104,12 +115,12 @@ static void __init atstk1003_setup_extdac(void)
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
@@ -120,25 +131,7 @@ static int __init atstk1003_init(void)
* ATSTK1000 uses 32-bit SDRAM interface. Reserve the
* SDRAM-specific pins so that nobody messes with them.
*/
- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
-
- at32_add_system_devices();
+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_usart(1);
@@ -154,7 +147,7 @@ static int __init atstk1003_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index d9c5e0a2125..69a9f0f08c6 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -17,15 +17,16 @@
#include <linux/spi/at73c213.h>
#include <linux/spi/spi.h>
+#include <linux/atmel-mci.h>
#include <video/atmel_lcdc.h>
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
#include "atstk1000.h"
@@ -71,6 +72,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
} };
#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+#endif
+
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1004_setup_extdac(void)
{
@@ -89,7 +100,7 @@ static void __init atstk1004_setup_extdac(void)
goto err_set_clk;
}
- at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
at73c213_data.dac_clk = gclk;
err_set_clk:
@@ -109,20 +120,18 @@ static void __init atstk1004_setup_extdac(void)
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
static int __init atstk1004_init(void)
{
- at32_add_system_devices();
-
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_usart(1);
#else
@@ -137,10 +146,11 @@ static int __init atstk1004_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size, 0);
+ fbmem_start, fbmem_size,
+ ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
at32_add_device_ssc(0, ATMEL_SSC_TX);
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
index 3d0a102ad45..6e4d561977f 100644
--- a/arch/avr32/boards/atstk1000/flash.c
+++ b/arch/avr32/boards/atstk1000/flash.c
@@ -13,7 +13,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 8bedf93876a..b6b88f5e0b4 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -18,9 +18,9 @@
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
#include "atstk1000.h"
@@ -55,7 +55,7 @@ static struct fb_monspecs __initdata atstk1000_default_monspecs = {
.dclkmax = 30000000,
};
-struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata atstk1000_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-16 05:33:51 +0000