diff options
Diffstat (limited to 'arch/arm/mach-u300')
36 files changed, 357 insertions, 7548 deletions
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 801b21e7f67..bc51a71394a 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,87 +1,35 @@ -if ARCH_U300 - -menu "ST-Ericsson AB U300/U330/U335/U365 Platform" +menuconfig ARCH_U300 + bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_VIC + select CLKSRC_MMIO + select CPU_ARM926T + select HAVE_TCM + select PINCTRL + select PINCTRL_COH901 + select PINCTRL_U300 + select MFD_SYSCON + help + Support for ST-Ericsson U300 series mobile platforms. -comment "ST-Ericsson Mobile Platform Products" +if ARCH_U300 config MACH_U300 + depends on ARCH_U300 bool "U300" - -comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" - -choice - prompt "U300/U330/U335/U365 system type" - default MACH_U300_BS2X - ---help--- - You need to select the target system, i.e. the - U300/U330/U335/U365 board that you want to compile your kernel - for. - -config MACH_U300_BS2X - bool "S26/S26/B25/B26 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S26/S25 test products. (Also works on - B26/B25 big boards.) - -config MACH_U300_BS330 - bool "S330/B330 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S330/B330 test products. - -config MACH_U300_BS335 - bool "S335/B335 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S335/B335 test products. - -config MACH_U300_BS365 - bool "S365/B365 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S365/B365 test products. - -endchoice - -choice - prompt "Memory configuration" - default MACH_U300_SINGLE_RAM - ---help--- - You have to config the kernel according to the physical memory - configuration. - -config MACH_U300_SINGLE_RAM - bool "Single RAM" - help - Select this if you want support for Single RAM phones. - -config MACH_U300_DUAL_RAM - bool "Dual RAM" - help - Select this if you want support for Dual RAM phones. - This is two RAM memorys on different EMIFs. -endchoice + default y config U300_DEBUG + depends on ARCH_U300 bool "Debug support for U300" depends on PM help Debug support for U300 in sysfs, procfs etc. -config MACH_U300_SEMI_IS_SHARED - bool "The SEMI is used by both the access and application side" - depends on MACH_U300 - help - This makes it possible to use the SEMI (Shared External - Memory Interface) from both from access and application - side. - config MACH_U300_SPIDUMMY + depends on ARCH_U300 bool "SSP/SPI dummy chip" select SPI select SPI_MASTER @@ -93,25 +41,4 @@ config MACH_U300_SPIDUMMY you don't need it. Selecting this will activate the SPI framework and ARM PL022 support. -comment "All the settings below must match the bootloader's settings" - -config MACH_U300_ACCESS_MEM_SIZE - int "Access CPU memory allocation" - range 7 25 - depends on MACH_U300_SINGLE_RAM - default 13 - help - How much memory in MiB that the Access side CPU has allocated - -config MACH_U300_2MB_ALIGNMENT_FIX - bool "2MiB alignment fix" - depends on MACH_U300_SINGLE_RAM - default y - help - If yes and the Access side CPU has allocated an odd size in - MiB, this fix gives you one MiB extra that would otherwise be - lost due to Linux 2 MiB alignment policy. - -endmenu - endif diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index fab46fe9a71..3ec74ac95bc 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -2,14 +2,10 @@ # Makefile for the linux kernel, U300 machine. # -obj-y := core.o clock.o timer.o gpio.o padmux.o +obj-y := core.o obj-m := obj-n := obj- := -obj-$(CONFIG_ARCH_U300) += u300.o -obj-$(CONFIG_MMC) += mmc.o -obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o -obj-$(CONFIG_I2C_STU300) += i2c.o obj-$(CONFIG_REGULATOR_AB3100) += regulator.o diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot index 6fbfc6ea2d3..87811de0bd9 100644 --- a/arch/arm/mach-u300/Makefile.boot +++ b/arch/arm/mach-u300/Makefile.boot @@ -1,15 +1,4 @@ -# Note: the following conditions must always be true: -# ZRELADDR == virt_to_phys(TEXTADDR) -# PARAMS_PHYS must be within 4MB of ZRELADDR -# INITRD_PHYS must be in RAM - -ifdef CONFIG_MACH_U300_SINGLE_RAM - zreladdr-y := 0x28E08000 - params_phys-y := 0x28E00100 -else - zreladdr-y := 0x48008000 - params_phys-y := 0x48000100 -endif - + zreladdr-y += 0x48008000 +params_phys-y := 0x48000100 # This isn't used. -#initrd_phys-y := 0x29800000 +#initrd_phys-y := 0x48800000 diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c deleted file mode 100644 index 7458fc6df5c..00000000000 --- a/arch/arm/mach-u300/clock.c +++ /dev/null @@ -1,1504 +0,0 @@ -/* - * - * arch/arm/mach-u300/clock.c - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Define clocks in the app platform. - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - * - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <linux/debugfs.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/io.h> -#include <linux/seq_file.h> - -#include <asm/clkdev.h> -#include <mach/hardware.h> -#include <mach/syscon.h> - -#include "clock.h" - -/* - * TODO: - * - move all handling of the CCR register into this file and create - * a spinlock for the CCR register - * - switch to the clkdevice lookup mechanism that maps clocks to - * device ID:s instead when it becomes available in kernel 2.6.29. - * - implement rate get/set for all clocks that need it. - */ - -/* - * Syscon clock I/O registers lock so clock requests don't collide - * NOTE: this is a local lock only used to lock access to clock and - * reset registers in syscon. - */ -static DEFINE_SPINLOCK(syscon_clkreg_lock); -static DEFINE_SPINLOCK(syscon_resetreg_lock); - -/* - * The clocking hierarchy currently looks like this. - * NOTE: the idea is NOT to show how the clocks are routed on the chip! - * The ideas is to show dependencies, so a clock higher up in the - * hierarchy has to be on in order for another clock to be on. Now, - * both CPU and DMA can actually be on top of the hierarchy, and that - * is not modeled currently. Instead we have the backbone AMBA bus on - * top. This bus cannot be programmed in any way but conceptually it - * needs to be active for the bridges and devices to transport data. - * - * Please be aware that a few clocks are hw controlled, which mean that - * the hw itself can turn on/off or change the rate of the clock when - * needed! - * - * AMBA bus - * | - * +- CPU - * +- FSMC NANDIF NAND Flash interface - * +- SEMI Shared Memory interface - * +- ISP Image Signal Processor (U335 only) - * +- CDS (U335 only) - * +- DMA Direct Memory Access Controller - * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) - * +- APEX - * +- VIDEO_ENC AVE2/3 Video Encoder - * +- XGAM Graphics Accelerator Controller - * +- AHB - * | - * +- ahb:0 AHB Bridge - * | | - * | +- ahb:1 INTCON Interrupt controller - * | +- ahb:3 MSPRO Memory Stick Pro controller - * | +- ahb:4 EMIF External Memory interface - * | - * +- fast:0 FAST bridge - * | | - * | +- fast:1 MMCSD MMC/SD card reader controller - * | +- fast:2 I2S0 PCM I2S channel 0 controller - * | +- fast:3 I2S1 PCM I2S channel 1 controller - * | +- fast:4 I2C0 I2C channel 0 controller - * | +- fast:5 I2C1 I2C channel 1 controller - * | +- fast:6 SPI SPI controller - * | +- fast:7 UART1 Secondary UART (U335 only) - * | - * +- slow:0 SLOW bridge - * | - * +- slow:1 SYSCON (not possible to control) - * +- slow:2 WDOG Watchdog - * +- slow:3 UART0 primary UART - * +- slow:4 TIMER_APP Application timer - used in Linux - * +- slow:5 KEYPAD controller - * +- slow:6 GPIO controller - * +- slow:7 RTC controller - * +- slow:8 BT Bus Tracer (not used currently) - * +- slow:9 EH Event Handler (not used currently) - * +- slow:a TIMER_ACC Access style timer (not used currently) - * +- slow:b PPM (U335 only, what is that?) - */ - -/* - * Reset control functions. We remember if a block has been - * taken out of reset and don't remove the reset assertion again - * and vice versa. Currently we only remove resets so the - * enablement function is defined out. - */ -static void syscon_block_reset_enable(struct clk *clk) -{ - u16 val; - unsigned long iflags; - - /* Not all blocks support resetting */ - if (!clk->res_reg || !clk->res_mask) - return; - spin_lock_irqsave(&syscon_resetreg_lock, iflags); - val = readw(clk->res_reg); - val |= clk->res_mask; - writew(val, clk->res_reg); - spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); - clk->reset = true; -} - -static void syscon_block_reset_disable(struct clk *clk) -{ - u16 val; - unsigned long iflags; - - /* Not all blocks support resetting */ - if (!clk->res_reg || !clk->res_mask) - return; - spin_lock_irqsave(&syscon_resetreg_lock, iflags); - val = readw(clk->res_reg); - val &= ~clk->res_mask; - writew(val, clk->res_reg); - spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); - clk->reset = false; -} - -int __clk_get(struct clk *clk) -{ - u16 val; - - /* The MMC and MSPRO clocks need some special set-up */ - if (!strcmp(clk->name, "MCLK")) { - /* Set default MMC clock divisor to 18.9 MHz */ - writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); - /* Disable the MMC feedback clock */ - val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; - /* Disable MSPRO frequency */ - val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); - } - if (!strcmp(clk->name, "MSPRO")) { - val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); - /* Disable the MMC feedback clock */ - val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; - /* Enable MSPRO frequency */ - val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); - } - return 1; -} -EXPORT_SYMBOL(__clk_get); - -void __clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(__clk_put); - -static void syscon_clk_disable(struct clk *clk) -{ - unsigned long iflags; - - /* Don't touch the hardware controlled clocks */ - if (clk->hw_ctrld) - return; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void syscon_clk_enable(struct clk *clk) -{ - unsigned long iflags; - - /* Don't touch the hardware controlled clocks */ - if (clk->hw_ctrld) - return; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static u16 syscon_clk_get_rate(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); - return val; -} - -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER -static void enable_i2s0_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Set I2S0 to use the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_I2S0_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val |= U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void enable_i2s1_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Set I2S1 to use the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_I2S1_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val |= U300_SYSCON_CEFR_I2S1_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void disable_i2s0_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Disable I2S0 use of the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ - if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void disable_i2s1_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Disable I2S1 use of the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ - if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} -#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */ - - -static void syscon_clk_rate_set_mclk(unsigned long rate) -{ - u16 val; - u32 reg; - unsigned long iflags; - - switch (rate) { - case 18900000: - val = 0x0054; - break; - case 20800000: - val = 0x0044; - break; - case 23100000: - val = 0x0043; - break; - case 26000000: - val = 0x0033; - break; - case 29700000: - val = 0x0032; - break; - case 34700000: - val = 0x0022; - break; - case 41600000: - val = 0x0021; - break; - case 52000000: - val = 0x0011; - break; - case 104000000: - val = 0x0000; - break; - default: - printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n", - rate); - return; - } - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & - ~U300_SYSCON_MMF0R_MASK; - writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -void syscon_clk_rate_set_cpuclk(unsigned long rate) -{ - u16 val; - unsigned long iflags; - - switch (rate) { - case 13000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; - break; - case 52000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; - break; - case 104000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; - break; - case 208000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; - break; - default: - return; - } - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) & - ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} -EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk); - -void clk_disable(struct clk *clk) -{ - unsigned long iflags; - - spin_lock_irqsave(&clk->lock, iflags); - if (clk->usecount > 0 && !(--clk->usecount)) { - /* some blocks lack clocking registers and cannot be disabled */ - if (clk->disable) - clk->disable(clk); - if (likely((u32)clk->parent)) - clk_disable(clk->parent); - } -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER - if (unlikely(!strcmp(clk->name, "I2S0"))) - disable_i2s0_vcxo(); - if (unlikely(!strcmp(clk->name, "I2S1"))) - disable_i2s1_vcxo(); -#endif - spin_unlock_irqrestore(&clk->lock, iflags); -} -EXPORT_SYMBOL(clk_disable); - -int clk_enable(struct clk *clk) -{ - int ret = 0; - unsigned long iflags; - - spin_lock_irqsave(&clk->lock, iflags); - if (clk->usecount++ == 0) { - if (likely((u32)clk->parent)) - ret = clk_enable(clk->parent); - - if (unlikely(ret != 0)) - clk->usecount--; - else { - /* remove reset line (we never enable reset again) */ - syscon_block_reset_disable(clk); - /* clocks without enable function are always on */ - if (clk->enable) - clk->enable(clk); -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER - if (unlikely(!strcmp(clk->name, "I2S0"))) - enable_i2s0_vcxo(); - if (unlikely(!strcmp(clk->name, "I2S1"))) - enable_i2s1_vcxo(); -#endif - } - } - spin_unlock_irqrestore(&clk->lock, iflags); - return ret; - -} -EXPORT_SYMBOL(clk_enable); - -/* Returns the clock rate in Hz */ -static unsigned long clk_get_rate_cpuclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 52000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - return 104000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 208000000; - default: - break; - } - return clk->rate; -} - -static unsigned long clk_get_rate_ahb_clk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 6500000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 26000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 52000000; - default: - break; - } - return clk->rate; - -} - -static unsigned long clk_get_rate_emif_clk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 52000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 104000000; - default: - break; - } - return clk->rate; - -} - -static unsigned long clk_get_rate_xgamclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 6500000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 26000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 52000000; - default: - break; - } - - return clk->rate; -} - -static unsigned long clk_get_rate_mclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - /* - * Here, the 208 MHz PLL gets shut down and the always - * on 13 MHz PLL used for RTC etc kicks into use - * instead. - */ - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - { - /* - * This clock is under program control. The register is - * divided in two nybbles, bit 7-4 gives cycles-1 to count - * high, bit 3-0 gives cycles-1 to count low. Distribute - * these with no more than 1 cycle difference between - * low and high and add low and high to get the actual - * divisor. The base PLL is 208 MHz. Writing 0x00 will - * divide by 1 and 1 so the highest frequency possible - * is 104 MHz. - * - * e.g. 0x54 => - * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz - */ - u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & - U300_SYSCON_MMF0R_MASK; - switch (val) { - case 0x0054: - return 18900000; - case 0x0044: - return 20800000; - case 0x0043: - return 23100000; - case 0x0033: - return 26000000; - case 0x0032: - return 29700000; - case 0x0022: - return 34700000; - case 0x0021: - return 41600000; - case 0x0011: - return 52000000; - case 0x0000: - return 104000000; - default: - break; - } - } - default: - break; - } - - return clk->rate; -} - -static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 26000000; - default: - break; - } - - return clk->rate; -} - -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk->get_rate) - return clk->get_rate(clk); - else - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate) -{ - if (rate <= 18900000) - return 18900000; - if (rate <= 20800000) - return 20800000; - if (rate <= 23100000) - return 23100000; - if (rate <= 26000000) - return 26000000; - if (rate <= 29700000) - return 29700000; - if (rate <= 34700000) - return 34700000; - if (rate <= 41600000) - return 41600000; - if (rate <= 52000000) - return 52000000; - return -EINVAL; -} - -static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) -{ - if (rate <= 13000000) - return 13000000; - if (rate <= 52000000) - return 52000000; - if (rate <= 104000000) - return 104000000; - if (rate <= 208000000) - return 208000000; - return -EINVAL; -} - -/* - * This adjusts a requested rate to the closest exact rate - * a certain clock can provide. For a fixed clock it's - * mostly clk->rate. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */ - /* Else default to fixed value */ - - if (clk->round_rate) { - return (long) clk->round_rate(clk, rate); - } else { - printk(KERN_ERR "clock: Failed to round rate of %s\n", - clk->name); - } - return (long) clk->rate; -} -EXPORT_SYMBOL(clk_round_rate); - -static int clk_set_rate_mclk(struct clk *clk, unsigned long rate) -{ - syscon_clk_rate_set_mclk(clk_round_rate(clk, rate)); - return 0; -} - -static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate) -{ - syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate)); - return 0; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - /* TODO: set for EMIFCLK and AHBCLK */ - /* Else assume the clock is fixed and fail */ - if (clk->set_rate) { - return clk->set_rate(clk, rate); - } else { - printk(KERN_ERR "clock: Failed to set %s to %ld hz\n", - clk->name, rate); - return -EINVAL; - } -} -EXPORT_SYMBOL(clk_set_rate); - -/* - * Clock definitions. The clock parents are set to respective - * bridge and the clock framework makes sure that the clocks have - * parents activated and are brought out of reset when in use. - * - * Clocks that have hw_ctrld = true are hw controlled, and the hw - * can by itself turn these clocks on and off. - * So in other words, we don't really have to care about them. - */ - -static struct clk amba_clk = { - .name = "AMBA", - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = false, - .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), -}; - -/* - * These blocks are connected directly to the AMBA bus - * with no bridge. - */ - -static struct clk cpu_clk = { - .name = "CPU", - .parent = &amba_clk, - .rate = 208000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_CPU_RESET_EN, - .set_rate = clk_set_rate_cpuclk, - .get_rate = clk_get_rate_cpuclk, - .round_rate = clk_round_rate_cpuclk, - .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), -}; - -static struct clk nandif_clk = { - .name = "FSMC", - .parent = &amba_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), -}; - -static struct clk semi_clk = { - .name = "SEMI", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - /* It is not possible to reset SEMI */ - .hw_ctrld = false, - .reset = false, - .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk isp_clk = { - .name = "ISP", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_ISP_RESET_EN, - .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), -}; - -static struct clk cds_clk = { - .name = "CDS", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_CDS_RESET_EN, - .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), -}; -#endif - -static struct clk dma_clk = { - .name = "DMA", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN, - .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), -}; - -static struct clk aaif_clk = { - .name = "AAIF", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), -}; - -static struct clk apex_clk = { - .name = "APEX", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_APEX_RESET_EN, - .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), -}; - -static struct clk video_enc_clk = { - .name = "VIDEO_ENC", - .parent = &amba_clk, - .rate = 208000000, /* this varies! */ - .hw_ctrld = false, - .reset = false, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - /* This has XGAM in the name but refers to the video encoder */ - .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN, - .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), -}; - -static struct clk xgam_clk = { - .name = "XGAMCLK", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN, - .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, - .get_rate = clk_get_rate_xgamclk, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), -}; - -/* This clock is used to activate the video encoder */ -static struct clk ahb_clk = { - .name = "AHB", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, /* This one is set to false due to HW bug */ - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_AHB_RESET_EN, - .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_ahb_clk, - .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), -}; - - -/* - * Clocks on the AHB bridge - */ - -static struct clk ahb_subsys_clk = { - .name = "AHB_SUBSYS", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = false, - .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_ahb_clk, - .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), -}; - -static struct clk intcon_clk = { - .name = "INTCON", - .parent = &ahb_subsys_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, - /* INTCON can be reset but not clock-gated */ - .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), - -}; - -static struct clk mspro_clk = { - .name = "MSPRO", - .parent = &ahb_subsys_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN, - .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), -}; - -static struct clk emif_clk = { - .name = "EMIF", - .parent = &ahb_subsys_clk, - .rate = 104000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_emif_clk, - .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), -}; - - -/* - * Clocks on the FAST bridge - */ -static struct clk fast_clk = { - .name = "FAST_BRIDGE", - .parent = &amba_clk, - .rate = 13000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), -}; - -/* - * The MMCI apb_pclk is hardwired to the same terminal as the - * external MCI clock. Thus this will be referenced twice. - */ -static struct clk mmcsd_clk = { - .name = "MCLK", - .parent = &fast_clk, - .rate = 18900000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, - .get_rate = clk_get_rate_mclk, - .set_rate = clk_set_rate_mclk, - .round_rate = clk_round_rate_mclk, - .disable = syscon_clk_disable, - .enable = syscon_clk_enable, - .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), -}; - -static struct clk i2s0_clk = { - .name = "i2s0", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), -}; - -static struct clk i2s1_clk = { - .name = "i2s1", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), -}; - -static struct clk i2c0_clk = { - .name = "I2C0", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), -}; - -static struct clk i2c1_clk = { - .name = "I2C1", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), -}; - -/* - * The SPI apb_pclk is hardwired to the same terminal as the - * external SPI clock. Thus this will be referenced twice. - */ -static struct clk spi_clk = { - .name = "SPI", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk uart1_pclk = { - .name = "UART1_PCLK", - .parent = &fast_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock), -}; - -/* This one is hardwired to PLL13 */ -static struct clk uart1_clk = { - .name = "UART1_CLK", - .rate = 13000000, - .hw_ctrld = true, - .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), -}; -#endif - - -/* - * Clocks on the SLOW bridge - */ -static struct clk slow_clk = { - .name = "SLOW_BRIDGE", - .parent = &amba_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN, - .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), -}; - -/* TODO: implement SYSCON clock? */ - -static struct clk wdog_clk = { - .name = "WDOG", - .parent = &slow_clk, - .hw_ctrld = false, - .rate = 32768, - .reset = false, - /* This is always on, cannot be enabled/disabled or reset */ - .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), -}; - -static struct clk uart0_pclk = { - .name = "UART0_PCLK", - .parent = &slow_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_UART_RESET_EN, - .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock), -}; - -/* This one is hardwired to PLL13 */ -static struct clk uart0_clk = { - .name = "UART0_CLK", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .lock = __SPIN_LOCK_UNLOCKED(uart0_clk.lock), -}; - -static struct clk keypad_clk = { - .name = "KEYPAD", - .parent = &slow_clk, - .rate = 32768, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN, - .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), -}; - -static struct clk gpio_clk = { - .name = "GPIO", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN, - .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), -}; - -static struct clk rtc_clk = { - .name = "RTC", - .parent = &slow_clk, - .rate = 32768, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, - /* This clock is always on, cannot be enabled/disabled */ - .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), -}; - -static struct clk bustr_clk = { - .name = "BUSTR", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_BTR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), -}; - -static struct clk evhist_clk = { - .name = "EVHIST", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_EH_RESET_EN, - .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), -}; - -static struct clk timer_clk = { - .name = "TIMER", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), -}; - -/* - * There is a binary divider in the hardware that divides - * the 13MHz PLL by 13 down to 1 MHz. - */ -static struct clk app_timer_clk = { - .name = "TIMER_APP", - .parent = &slow_clk, - .rate = 1000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk ppm_clk = { - .name = "PPM", - .parent = &slow_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */ - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_PPM_RESET_EN, - .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), -}; -#endif - -#define DEF_LOOKUP(devid, clkref) \ - { \ - .dev_id = devid, \ - .clk = clkref, \ - } - -#define DEF_LOOKUP_CON(devid, conid, clkref) \ - { \ - .dev_id = devid, \ - .con_id = conid, \ - .clk = clkref, \ - } - -/* - * Here we only define clocks that are meaningful to - * look up through clockdevice. - */ -static struct clk_lookup lookups[] = { - /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("fsmc-nand", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), -#endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("msl", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), - DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), - /* AHB bridge clocks */ - DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), - DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk), - /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), - DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk), - /* - * The .0 and .1 identifiers on these comes from the platform device - * .id field and are assigned when the platform devices are registered. - */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stu300.0", &i2c0_clk), - DEF_LOOKUP("stu300.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), - DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), - DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk), -#endif - /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("coh901327_wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart0_clk), - DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("coh901461-keypad", &keypad_clk), - DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc-coh901331", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), -#endif -}; - -static void __init clk_register(void) -{ - /* Register the lookups */ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - -#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) -/* - * The following makes it possible to view the status (especially - * reference count and reset status) for the clocks in the platform - * by looking into the special file <debugfs>/u300_clocks - */ - -/* A list of all clocks in the platform */ -static struct clk *clks[] = { - /* Top node clock for the AMBA bus */ - &amba_clk, - /* Connected directly to the AMBA bus */ - &cpu_clk, - &nandif_clk, - &semi_clk, -#ifdef CONFIG_MACH_U300_BS335 - &isp_clk, - &cds_clk, -#endif - &dma_clk, - &aaif_clk, - &apex_clk, - &video_enc_clk, - &xgam_clk, - &ahb_clk, - - /* AHB bridge clocks */ - &ahb_subsys_clk, - &intcon_clk, - &mspro_clk, - &emif_clk, - /* FAST bridge clocks */ - &fast_clk, - &mmcsd_clk, - &i2s0_clk, - &i2s1_clk, - &i2c0_clk, - &i2c1_clk, - &spi_clk, -#ifdef CONFIG_MACH_U300_BS335 - &uart1_clk, - &uart1_pclk, -#endif - /* SLOW bridge clocks */ - &slow_clk, - &wdog_clk, - &uart0_clk, - &uart0_pclk, - &app_timer_clk, - &keypad_clk, - &gpio_clk, - &rtc_clk, - &bustr_clk, - &evhist_clk, - &timer_clk, -#ifdef CONFIG_MACH_U300_BS335 - &ppm_clk, -#endif -}; - -static int u300_clocks_show(struct seq_file *s, void *data) -{ - struct clk *clk; - int i; - - seq_printf(s, "CLOCK DEVICE RESET STATE\t" \ - "ACTIVE\tUSERS\tHW CTRL FREQ\n"); - seq_printf(s, "---------------------------------------------" \ - "-----------------------------------------\n"); - for (i = 0; i < ARRAY_SIZE(clks); i++) { - clk = clks[i]; - if (clk != ERR_PTR(-ENOENT)) { - /* Format clock and device name nicely */ - char cdp[33]; - int chars; - - chars = snprintf(&cdp[0], 17, "%s", clk->name); - while (chars < 16) { - cdp[chars] = ' '; - chars++; - } - chars = snprintf(&cdp[16], 17, "%s", clk->dev ? - dev_name(clk->dev) : "N/A"); - while (chars < 16) { - cdp[chars+16] = ' '; - chars++; - } - cdp[32] = '\0'; - if (clk->get_rate || clk->rate != 0) - seq_printf(s, - "%s%s\t%s\t%d\t%s\t%lu Hz\n", - &cdp[0], - clk->reset ? - "ASSERTED" : "RELEASED", - clk->usecount ? "ON" : "OFF", - clk->usecount, - clk->hw_ctrld ? "YES" : "NO ", - clk_get_rate(clk)); - else - seq_printf(s, - "%s%s\t%s\t%d\t%s\t" \ - "(unknown rate)\n", - &cdp[0], - clk->reset ? - "ASSERTED" : "RELEASED", - clk->usecount ? "ON" : "OFF", - clk->usecount, - clk->hw_ctrld ? "YES" : "NO "); - } - } - return 0; -} - -static int u300_clocks_open(struct inode *inode, struct file *file) -{ - return single_open(file, u300_clocks_show, NULL); -} - -static const struct file_operations u300_clocks_operations = { - .open = u300_clocks_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init init_clk_read_debugfs(void) -{ - /* Expose a simple debugfs interface to view all clocks */ - (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, - &u300_clocks_operations); - return 0; -} -/* - * This needs to come in after the core_initcall() for the - * overall clocks, because debugfs is not available until - * the subsystems come up. - */ -module_init(init_clk_read_debugfs); -#endif - -int __init u300_clock_init(void) -{ - u16 val; - - /* - * FIXME: shall all this powermanagement stuff really live here??? - */ - - /* Set system to run at PLL208, max performance, a known state. */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Wait for the PLL208 to lock if not locked in yet */ - while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & - U300_SYSCON_CSR_PLL208_LOCK_IND)); - - /* Power management enable */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); - val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); - - clk_register(); - - /* - * Some of these may be on when we boot the system so make sure they - * are turned OFF. - */ - syscon_block_reset_enable(&timer_clk); - timer_clk.disable(&timer_clk); - - /* - * These shall be turned on by default when we boot the system - * so make sure they are ON. (Adding CPU here is a bit too much.) - * These clocks will be claimed by drivers later. - */ - syscon_block_reset_disable(&semi_clk); - syscon_block_reset_disable(&emif_clk); - clk_enable(&semi_clk); - clk_enable(&emif_clk); - - return 0; -} diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h deleted file mode 100644 index c34f3ea3017..00000000000 --- a/arch/arm/mach-u300/clock.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/clock.h - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * Copyright (C) 2007-2009 ST-Ericsson AB - * Adopted to ST-Ericsson U300 platforms by - * Jonas Aaberg <jonas.aberg@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __MACH_CLOCK_H -#define __MACH_CLOCK_H - -#include <linux/clk.h> - -struct clk { - struct list_head node; - struct module *owner; - struct device *dev; - const char *name; - struct clk *parent; - - spinlock_t lock; - unsigned long rate; - bool reset; - __u16 clk_val; - __s8 usecount; - __u32 res_reg; - __u16 res_mask; - - bool hw_ctrld; - - void (*recalc) (struct clk *); - int (*set_rate) (struct clk *, unsigned long); - unsigned long (*get_rate) (struct clk *); - unsigned long (*round_rate) (struct clk *, unsigned long); - void (*init) (struct clk *); - void (*enable) (struct clk *); - void (*disable) (struct clk *); -}; - -int u300_clock_init(void); - -#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index aa53ee22438..35670b15f28 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -3,1540 +3,222 @@ * arch/arm/mach-u300/core.c * * - * Copyright (C) 2007-2010 ST-Ericsson AB + * Copyright (C) 2007-2012 ST-Ericsson SA * License terms: GNU General Public License (GPL) version 2 * Core platform support, IRQ handling and device definitions. * Author: Linus Walleij <linus.walleij@stericsson.com> */ #include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/termios.h> -#include <linux/amba/bus.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/clk-u300.h> +#include <linux/irqchip.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/clocksource.h> #include <linux/clk.h> -#include <linux/err.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/fsmc.h> -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <asm/hardware/vic.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/coh901318.h> -#include <mach/hardware.h> -#include <mach/syscon.h> -#include <mach/dma_channels.h> - -#include "clock.h" -#include "mmc.h" -#include "spi.h" -#include "i2c.h" +#include <asm/mach/arch.h> /* - * Static I/O mappings that are needed for booting the U300 platforms. The - * only things we need are the areas where we find the timer, syscon and - * intcon, since the remaining device drivers will map their own memory - * physical to virtual as the need arise. + * These are the large blocks of memory allocated for I/O. + * the defines are used for setting up the I/O memory mapping. */ -static struct map_desc u300_io_desc[] __initdata = { - { - .virtual = U300_SLOW_PER_VIRT_BASE, - .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE), - .length = SZ_64K, - .type = MT_DEVICE, - }, - { - .virtual = U300_AHB_PER_VIRT_BASE, - .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE), - .length = SZ_32K, - .type = MT_DEVICE, - }, - { - .virtual = U300_FAST_PER_VIRT_BASE, - .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE), - .length = SZ_32K, - .type = MT_DEVICE, - }, - { - .virtual = 0xffff2000, /* TCM memory */ - .pfn = __phys_to_pfn(0xffff2000), - .length = SZ_16K, - .type = MT_DEVICE, - }, - /* - * This overlaps with the IRQ vectors etc at 0xffff0000, so these - * may have to be moved to 0x00000000 in order to use the ROM. - */ - /* - { - .virtual = U300_BOOTROM_VIRT_BASE, - .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE), - .length = SZ_64K, - .type = MT_ROM, - }, - */ -}; - -void __init u300_map_io(void) -{ - iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); -} +/* NAND Flash CS0 */ +#define U300_NAND_CS0_PHYS_BASE 0x80000000 +/* NFIF */ +#define U300_NAND_IF_PHYS_BASE 0x9f800000 +/* ALE, CLE offset for FSMC NAND */ +#define PLAT_NAND_CLE (1 << 16) +#define PLAT_NAND_ALE (1 << 17) +/* AHB Peripherals */ +#define U300_AHB_PER_PHYS_BASE 0xa0000000 +#define U300_AHB_PER_VIRT_BASE 0xff010000 +/* FAST Peripherals */ +#define U300_FAST_PER_PHYS_BASE 0xc0000000 +#define U300_FAST_PER_VIRT_BASE 0xff020000 +/* SLOW Peripherals */ +#define U300_SLOW_PER_PHYS_BASE 0xc0010000 +#define U300_SLOW_PER_VIRT_BASE 0xff000000 +/* Boot ROM */ +#define U300_BOOTROM_PHYS_BASE 0xffff0000 +#define U300_BOOTROM_VIRT_BASE 0xffff0000 +/* SEMI config base */ +#define U300_SEMI_CONFIG_BASE 0x2FFE0000 /* - * Declaration of devices found on the U300 board and - * their respective memory locations. + * AHB peripherals */ -static struct amba_device uart0_device = { - .dev = { - .init_name = "uart0", /* Slow device at 0x3000 offset */ - .platform_data = NULL, - }, - .res = { - .start = U300_UART0_BASE, - .end = U300_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART0, NO_IRQ }, -}; - -/* The U335 have an additional UART1 on the APP CPU */ -#ifdef CONFIG_MACH_U300_BS335 -static struct amba_device uart1_device = { - .dev = { - .init_name = "uart1", /* Fast device at 0x7000 offset */ - .platform_data = NULL, - }, - .res = { - .start = U300_UART1_BASE, - .end = U300_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART1, NO_IRQ }, -}; -#endif - -static struct amba_device pl172_device = { - .dev = { - .init_name = "pl172", /* AHB device at 0x4000 offset */ - .platform_data = NULL, - }, - .res = { - .start = U300_EMIF_CFG_BASE, - .end = U300_EMIF_CFG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; +/* AHB Peripherals Bridge Controller */ +#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) +/* Vectored Interrupt Controller 0, servicing 32 interrupts */ +#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) +#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) +/* Vectored Interrupt Controller 1, servicing 32 interrupts */ +#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) +#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) +/* Memory Stick Pro (MSPRO) controller */ +#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) +/* EMIF Configuration Area */ +#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) /* - * Everything within this next ifdef deals with external devices connected to - * the APP SPI bus. + * FAST peripherals */ -static struct amba_device pl022_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "pl022", /* Fast device at 0x6000 offset */ - }, - .res = { - .start = U300_SPI_BASE, - .end = U300_SPI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_SPI, NO_IRQ }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; -static struct amba_device mmcsd_device = { - .dev = { - .init_name = "mmci", /* Fast device at 0x1000 offset */ - .platform_data = NULL, /* Added later */ - }, - .res = { - .start = U300_MMCSD_BASE, - .end = U300_MMCSD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; +/* FAST bridge control */ +#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) +/* MMC/SD controller */ +#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) +/* PCM I2S0 controller */ +#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) +/* PCM I2S1 controller */ +#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) +/* I2C0 controller */ +#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) +/* I2C1 controller */ +#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) +/* SPI controller */ +#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) +/* Fast UART1 on U335 only */ +#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) /* - * The order of device declaration may be important, since some devices - * have dependencies on other devices being initialized first. - */ -static struct amba_device *amba_devs[] __initdata = { - &uart0_device, -#ifdef CONFIG_MACH_U300_BS335 - &uart1_device, -#endif - &pl022_device, - &pl172_device, - &mmcsd_device, -}; - -/* Here follows a list of all hw resources that the platform devices - * allocate. Note, clock dependencies are not included + * SLOW peripherals */ -static struct resource gpio_resources[] = { - { - .start = U300_GPIO_BASE, - .end = (U300_GPIO_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - { - .name = "gpio0", - .start = IRQ_U300_GPIO_PORT0, - .end = IRQ_U300_GPIO_PORT0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio1", - .start = IRQ_U300_GPIO_PORT1, - .end = IRQ_U300_GPIO_PORT1, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio2", - .start = IRQ_U300_GPIO_PORT2, - .end = IRQ_U300_GPIO_PORT2, - .flags = IORESOURCE_IRQ, - }, -#ifdef U300_COH901571_3 - { - .name = "gpio3", - .start = IRQ_U300_GPIO_PORT3, - .end = IRQ_U300_GPIO_PORT3, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio4", - .start = IRQ_U300_GPIO_PORT4, - .end = IRQ_U300_GPIO_PORT4, - .flags = IORESOURCE_IRQ, - }, -#ifdef CONFIG_MACH_U300_BS335 - { - .name = "gpio5", - .start = IRQ_U300_GPIO_PORT5, - .end = IRQ_U300_GPIO_PORT5, - .flags = IORESOURCE_IRQ, - }, - { - .name = "gpio6", - .start = IRQ_U300_GPIO_PORT6, - .end = IRQ_U300_GPIO_PORT6, - .flags = IORESOURCE_IRQ, - }, -#endif /* CONFIG_MACH_U300_BS335 */ -#endif /* U300_COH901571_3 */ -}; - -static struct resource keypad_resources[] = { - { - .start = U300_KEYPAD_BASE, - .end = U300_KEYPAD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "coh901461-press", - .start = IRQ_U300_KEYPAD_KEYBF, - .end = IRQ_U300_KEYPAD_KEYBF, - .flags = IORESOURCE_IRQ, - }, - { - .name = "coh901461-release", - .start = IRQ_U300_KEYPAD_KEYBR, - .end = IRQ_U300_KEYPAD_KEYBR, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource rtc_resources[] = { - { - .start = U300_RTC_BASE, - .end = U300_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_RTC, - .end = IRQ_U300_RTC, - .flags = IORESOURCE_IRQ, - }, -}; +/* SLOW bridge control */ +#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) +/* SYSCON */ +#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) +#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) +/* Watchdog */ +#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) +/* UART0 */ +#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) +/* APP side special timer */ +#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) +#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) +/* Keypad */ +#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) +/* GPIO */ +#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) +/* RTC */ +#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) +/* Bus tracer */ +#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) +/* Event handler (hardware queue) */ +#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) +/* Genric Timer */ +#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) +/* PPM */ +#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) /* - * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2) - * but these are not yet used by the driver. + * REST peripherals */ -static struct resource fsmc_resources[] = { - { - .name = "nand_data", - .start = U300_NAND_CS0_PHYS_BASE, - .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "fsmc_regs", - .start = U300_NAND_IF_PHYS_BASE, - .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource i2c0_resources[] = { - { - .start = U300_I2C0_BASE, - .end = U300_I2C0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_I2C0, - .end = IRQ_U300_I2C0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c1_resources[] = { - { - .start = U300_I2C1_BASE, - .end = U300_I2C1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_I2C1, - .end = IRQ_U300_I2C1, - .flags = IORESOURCE_IRQ, - }, - -}; - -static struct resource wdog_resources[] = { - { - .start = U300_WDOG_BASE, - .end = U300_WDOG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_WDOG, - .end = IRQ_U300_WDOG, - .flags = IORESOURCE_IRQ, - } -}; - -/* TODO: These should be protected by suitable #ifdef's */ -static struct resource ave_resources[] = { - { - .name = "AVE3e I/O Area", - .start = U300_VIDEOENC_BASE, - .end = U300_VIDEOENC_BASE + SZ_512K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "AVE3e IRQ0", - .start = IRQ_U300_VIDEO_ENC_0, - .end = IRQ_U300_VIDEO_ENC_0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "AVE3e IRQ1", - .start = IRQ_U300_VIDEO_ENC_1, - .end = IRQ_U300_VIDEO_ENC_1, - .flags = IORESOURCE_IRQ, - }, - { - .name = "AVE3e Physmem Area", - .start = 0, /* 0 will be remapped to reserved memory */ - .end = SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - /* - * The AVE3e requires two regions of 256MB that it considers - * "invisible". The hardware will not be able to access these - * addresses, so they should never point to system RAM. - */ - { - .name = "AVE3e Reserved 0", - .start = 0xd0000000, - .end = 0xd0000000 + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "AVE3e Reserved 1", - .start = 0xe0000000, - .end = 0xe0000000 + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, -}; -static struct resource dma_resource[] = { - { - .start = U300_DMAC_BASE, - .end = U300_DMAC_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_U300_DMA, - .end = IRQ_U300_DMA, - .flags = IORESOURCE_IRQ, - } -}; +/* ISP (image signal processor) */ +#define U300_ISP_BASE (0xA0008000) +/* DMA Controller base */ +#define U300_DMAC_BASE (0xC0020000) +/* MSL Base */ +#define U300_MSL_BASE (0xc0022000) +/* APEX Base */ +#define U300_APEX_BASE (0xc0030000) +/* Video Encoder Base */ +#define U300_VIDEOENC_BASE (0xc0080000) +/* XGAM Base */ +#define U300_XGAM_BASE (0xd0000000) -#ifdef CONFIG_MACH_U300_BS335 -/* points out all dma slave channels. - * Syntax is [A1, B1, A2, B2, .... ,-1,-1] - * Select all channels from A to B, end of list is marked with -1,-1 +/* + * SYSCON addresses applicable to the core machine. */ -static int dma_slave_channels[] = { - U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, - U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1}; - -/* points out all dma memcpy channels. */ -static int dma_memcpy_channels[] = { - U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1}; - -#else /* CONFIG_MACH_U300_BS335 */ -static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1}; -static int dma_memcpy_channels[] = { - U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1}; - -#endif +/* Chip ID register 16bit (R/-) */ +#define U300_SYSCON_CIDR (0x400) +/* SMCR */ +#define U300_SYSCON_SMCR (0x4d0) +#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) +#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) +#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) +#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) +/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ +#define U300_SYSCON_CSDR (0x4f0) +#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) +/* PRINT_CONTROL Print Control 16bit (R/-) */ +#define U300_SYSCON_PCR (0x4f8) +#define U300_SYSCON_PCR_SERV_IND (0x0001) +/* BOOT_CONTROL 16bit (R/-) */ +#define U300_SYSCON_BCR (0x4fc) +#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) +#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) +#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) +#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) + +static void __iomem *syscon_base; -/** register dma for memory access - * - * active 1 means dma intends to access memory - * 0 means dma wont access memory +/* + * Static I/O mappings that are needed for booting the U300 platforms. The + * only things we need are the areas where we find the timer, syscon and + * intcon, since the remaining device drivers will map their own memory + * physical to virtual as the need arise. */ -static void coh901318_access_memory_state(struct device *dev, bool active) -{ -} - -#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \ - COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \ - COH901318_CX_CFG_LCR_DISABLE | \ - COH901318_CX_CFG_TC_IRQ_ENABLE | \ - COH901318_CX_CFG_BE_IRQ_ENABLE) -#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \ - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \ - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_MASTER_MODE_M1RW | \ - COH901318_CX_CTRL_TCP_DISABLE | \ - COH901318_CX_CTRL_TC_IRQ_DISABLE | \ - COH901318_CX_CTRL_HSP_DISABLE | \ - COH901318_CX_CTRL_HSS_DISABLE | \ - COH901318_CX_CTRL_DDMA_LEGACY | \ - COH901318_CX_CTRL_PRDD_SOURCE) -#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \ - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \ - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_MASTER_MODE_M1RW | \ - COH901318_CX_CTRL_TCP_DISABLE | \ - COH901318_CX_CTRL_TC_IRQ_DISABLE | \ - COH901318_CX_CTRL_HSP_DISABLE | \ - COH901318_CX_CTRL_HSS_DISABLE | \ - COH901318_CX_CTRL_DDMA_LEGACY | \ - COH901318_CX_CTRL_PRDD_SOURCE) -#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \ - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \ - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_MASTER_MODE_M1RW | \ - COH901318_CX_CTRL_TCP_DISABLE | \ - COH901318_CX_CTRL_TC_IRQ_ENABLE | \ - COH901318_CX_CTRL_HSP_DISABLE | \ - COH901318_CX_CTRL_HSS_DISABLE | \ - COH901318_CX_CTRL_DDMA_LEGACY | \ - COH901318_CX_CTRL_PRDD_SOURCE) - -const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { - { - .number = U300_DMA_MSL_TX_0, - .name = "MSL TX 0", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20, - }, - { - .number = U300_DMA_MSL_TX_1, - .name = "MSL TX 1", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_MSL_TX_2, - .name = "MSL TX 2", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .desc_nbr_max = 10, - }, - { - .number = U300_DMA_MSL_TX_3, - .name = "MSL TX 3", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_MSL_TX_4, - .name = "MSL TX 4", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_MSL_TX_5, - .name = "MSL TX 5", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20, - }, - { - .number = U300_DMA_MSL_TX_6, - .name = "MSL TX 6", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20, - }, - { - .number = U300_DMA_MSL_RX_0, - .name = "MSL RX 0", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220, - }, - { - .number = U300_DMA_MSL_RX_1, - .name = "MSL RX 1", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_2, - .name = "MSL RX 2", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_3, - .name = "MSL RX 3", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_4, - .name = "MSL RX 4", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_5, - .name = "MSL RX 5", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_6, - .name = "MSL RX 6", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220, - }, - { - .number = U300_DMA_MMCSD_RX_TX, - .name = "MMCSD RX TX", - .priority_high = 0, - .dev_addr = U300_MMCSD_BASE + 0x080, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - - }, - { - .number = U300_DMA_MSPRO_TX, - .name = "MSPRO TX", - .priority_high = 0, - }, - { - .number = U300_DMA_MSPRO_RX, - .name = "MSPRO RX", - .priority_high = 0, - }, - { - .number = U300_DMA_UART0_TX, - .name = "UART0 TX", - .priority_high = 0, - }, - { - .number = U300_DMA_UART0_RX, - .name = "UART0 RX", - .priority_high = 0, - }, - { - .number = U300_DMA_APEX_TX, - .name = "APEX TX", - .priority_high = 0, - }, - { - .number = U300_DMA_APEX_RX, - .name = "APEX RX", - .priority_high = 0, - }, - { - .number = U300_DMA_PCM_I2S0_TX, - .name = "PCM I2S0 TX", - .priority_high = 1, - .dev_addr = U300_PCM_I2S0_BASE + 0x14, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_PCM_I2S0_RX, - .name = "PCM I2S0 RX", - .priority_high = 1, - .dev_addr = U300_PCM_I2S0_BASE + 0x10, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_PCM_I2S1_TX, - .name = "PCM I2S1 TX", - .priority_high = 1, - .dev_addr = U300_PCM_I2S1_BASE + 0x14, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_PCM_I2S1_RX, - .name = "PCM I2S1 RX", - .priority_high = 1, - .dev_addr = U300_PCM_I2S1_BASE + 0x10, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_XGAM_CDI, - .name = "XGAM CDI", - .priority_high = 0, - }, - { - .number = U300_DMA_XGAM_PDI, - .name = "XGAM PDI", - .priority_high = 0, - }, - { - .number = U300_DMA_SPI_TX, - .name = "SPI TX", - .priority_high = 0, - }, - { - .number = U300_DMA_SPI_RX, - .name = "SPI RX", - .priority_high = 0, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_0, - .name = "GENERAL 00", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_1, - .name = "GENERAL 01", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_2, - .name = "GENERAL 02", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_3, - .name = "GENERAL 03", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_4, - .name = "GENERAL 04", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_5, - .name = "GENERAL 05", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_6, - .name = "GENERAL 06", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_7, - .name = "GENERAL 07", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_8, - .name = "GENERAL 08", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, -#ifdef CONFIG_MACH_U300_BS335 - { - .number = U300_DMA_UART1_TX, - .name = "UART1 TX", - .priority_high = 0, - }, - { - .number = U300_DMA_UART1_RX, - .name = "UART1 RX", - .priority_high = 0, - } -#else - { - .number = U300_DMA_GENERAL_PURPOSE_9, - .name = "GENERAL 09", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_10, - .name = "GENERAL 10", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - } -#endif -}; - - -static struct coh901318_platform coh901318_platform = { - .chans_slave = dma_slave_channels, - .chans_memcpy = dma_memcpy_channels, - .access_memory_state = coh901318_access_memory_state, - .chan_conf = chan_config, - .max_channels = U300_DMA_CHANNELS, -}; - -static struct platform_device wdog_device = { - .name = "coh901327_wdog", - .id = -1, - .num_resources = ARRAY_SIZE(wdog_resources), - .resource = wdog_resources, -}; - -static struct platform_device i2c0_device = { - .name = "stu300", - .id = 0, - .num_resources = ARRAY_SIZE(i2c0_resources), - .resource = i2c0_resources, -}; - -static struct platform_device i2c1_device = { - .name = "stu300", - .id = 1, - .num_resources = ARRAY_SIZE(i2c1_resources), - .resource = i2c1_resources, -}; - -static struct platform_device gpio_device = { - .name = "u300-gpio", - .id = -1, - .num_resources = ARRAY_SIZE(gpio_resources), - .resource = gpio_resources, -}; - -static struct platform_device keypad_device = { - .name = "keypad", - .id = -1, - .num_resources = ARRAY_SIZE(keypad_resources), - .resource = keypad_resources, -}; - -static struct platform_device rtc_device = { - .name = "rtc-coh901331", - .id = -1, - .num_resources = ARRAY_SIZE(rtc_resources), - .resource = rtc_resources, -}; - -static struct mtd_partition u300_partitions[] = { +static struct map_desc u300_io_desc[] __initdata = { { - .name = "bootrecords", - .offset = 0, - .size = SZ_128K, + .virtual = U300_SLOW_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE), + .length = SZ_64K, + .type = MT_DEVICE, }, { - .name = "free", - .offset = SZ_128K, - .size = 8064 * SZ_1K, + .virtual = U300_AHB_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE), + .length = SZ_32K, + .type = MT_DEVICE, }, { - .name = "platform", - .offset = 8192 * SZ_1K, - .size = 253952 * SZ_1K, + .virtual = U300_FAST_PER_VIRT_BASE, + .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE), + .length = SZ_32K, + .type = MT_DEVICE, }, }; -static struct fsmc_nand_platform_data nand_platform_data = { - .partitions = u300_partitions, - .nr_partitions = ARRAY_SIZE(u300_partitions), - .options = NAND_SKIP_BBTSCAN, - .width = FSMC_NAND_BW8, -}; +static void __init u300_map_io(void) +{ + iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); +} -static struct platform_device nand_device = { - .name = "fsmc-nand", - .id = -1, - .resource = fsmc_resources, - .num_resources = ARRAY_SIZE(fsmc_resources), - .dev = { - .platform_data = &nand_platform_data, - }, +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1), }; -static struct platform_device ave_device = { - .name = "video_enc", - .id = -1, - .num_resources = ARRAY_SIZE(ave_resources), - .resource = ave_resources, +static unsigned long pin_highz_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0), }; -static struct platform_device dma_device = { - .name = "coh901318", - .id = -1, - .resource = dma_resource, - .num_resources = ARRAY_SIZE(dma_resource), - .dev = { - .platform_data = &coh901318_platform, - .coherent_dma_mask = ~0, - }, +/* Pin control settings */ +static struct pinctrl_map __initdata u300_pinmux_map[] = { + /* anonymous maps for chip power and EMIFs */ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"), + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"), + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"), + /* per-device maps for MMC/SD, SPI and UART */ + PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"), + /* This pin is used for clock return rather than GPIO */ + PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11", + pin_pullup_conf), + /* This pin is used for card detect */ + PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS", + pin_highz_conf), }; -/* - * Notice that AMBA devices are initialized before platform devices. - * - */ -static struct platform_device *platform_devs[] __initdata = { - &dma_device, - &i2c0_device, - &i2c1_device, - &keypad_device, - &rtc_device, - &gpio_device, - &nand_device, - &wdog_device, - &ave_device -}; - - -/* - * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected - * together so some interrupts are connected to the first one and some - * to the second one. - */ -void __init u300_init_irq(void) -{ - u32 mask[2] = {0, 0}; - struct clk *clk; - int i; - - /* initialize clocking early, we want to clock the INTCON */ - u300_clock_init(); - - /* Clock the interrupt controller */ - clk = clk_get_sys("intcon", NULL); - BUG_ON(IS_ERR(clk)); - clk_enable(clk); - - for (i = 0; i < NR_IRQS; i++) - set_bit(i, (unsigned long *) &mask[0]); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); -} - - -/* - * U300 platforms peripheral handling - */ struct db_chip { u16 chipid; const char *name; @@ -1593,7 +275,7 @@ static void __init u300_init_check_chip(void) const char unknown[] = "UNKNOWN"; /* Read out and print chip ID */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR); + val = readw(syscon_base + U300_SYSCON_CIDR); /* This is in funky bigendian order... */ val = (val & 0xFFU) << 8 | (val >> 8); chip = db_chips; @@ -1608,115 +290,126 @@ static void __init u300_init_check_chip(void) printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ "(chip ID 0x%04x)\n", chipname, val); -#ifdef CONFIG_MACH_U300_BS330 - if ((val & 0xFF00U) != 0xd800) { - printk(KERN_ERR "Platform configured for BS330 " \ - "with DB3200 but %s detected, expect problems!", - chipname); - } -#endif -#ifdef CONFIG_MACH_U300_BS335 if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { - printk(KERN_ERR "Platform configured for BS365 " \ + printk(KERN_ERR "Platform configured for BS335 " \ " with DB3350 but %s detected, expect problems!", chipname); } -#endif -#ifdef CONFIG_MACH_U300_BS365 - if ((val & 0xFF00U) != 0xe800) { - printk(KERN_ERR "Platform configured for BS365 " \ - "with DB3210 but %s detected, expect problems!", - chipname); - } -#endif +} +/* Forward declare this function from the watchdog */ +void coh901327_watchdog_reset(void); +static void u300_restart(enum reboot_mode mode, const char *cmd) +{ + switch (mode) { + case REBOOT_SOFT: + case REBOOT_HARD: +#ifdef CONFIG_COH901327_WATCHDOG + coh901327_watchdog_reset(); +#endif + break; + default: + /* Do nothing */ + break; + } + /* Wait for system do die/reset. */ + while (1); } -/* - * Some devices and their resources require reserved physical memory from - * the end of the available RAM. This function traverses the list of devices - * and assigns actual addresses to these. - */ -static void __init u300_assign_physmem(void) +/* These are mostly to get the right device names for the clock lookups */ +static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE, + "pinctrl-u300", NULL), + OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE, + "u300-gpio", NULL), + OF_DEV_AUXDATA("stericsson,coh901327", U300_WDOG_BASE, + "coh901327_wdog", NULL), + OF_DEV_AUXDATA("stericsson,coh901331", U300_RTC_BASE, + "rtc-coh901331", NULL), + OF_DEV_AUXDATA("stericsson,coh901318", U300_DMAC_BASE, + "coh901318", NULL), + OF_DEV_AUXDATA("stericsson,fsmc-nand", U300_NAND_IF_PHYS_BASE, + "fsmc-nand", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE, + "uart0", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE, + "uart1", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE, + "pl022", NULL), + OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE, + "stu300.0", NULL), + OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE, + "stu300.1", NULL), + OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE, + "mmci", NULL), + { /* sentinel */ }, +}; + +static void __init u300_init_irq_dt(void) { - unsigned long curr_start = __pa(high_memory); - int i, j; + struct device_node *syscon; + struct clk *clk; - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) { - for (j = 0; j < platform_devs[i]->num_resources; j++) { - struct resource *const res = - &platform_devs[i]->resource[j]; + syscon = of_find_node_by_path("/syscon@c0011000"); + if (!syscon) { + pr_crit("could not find syscon node\n"); + return; + } + syscon_base = of_iomap(syscon, 0); + if (!syscon_base) { + pr_crit("could not remap syscon\n"); + return; + } + /* initialize clocking early, we want to clock the INTCON */ + u300_clk_init(syscon_base); - if (IORESOURCE_MEM == res->flags && - 0 == res->start) { - res->start = curr_start; - res->end += curr_start; - curr_start += (res->end - res->start + 1); + /* Bootstrap EMIF and SEMI clocks */ + clk = clk_get_sys("pl172", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + clk = clk_get_sys("semi", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); - printk(KERN_INFO "core.c: Mapping RAM " \ - "%#x-%#x to device %s:%s\n", - res->start, res->end, - platform_devs[i]->name, res->name); - } - } - } + /* Clock the interrupt controller */ + clk = clk_get_sys("intcon", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + + irqchip_init(); } -void __init u300_init_devices(void) +static void __init u300_init_machine_dt(void) { - int i; u16 val; /* Check what platform we run and print some status information */ u300_init_check_chip(); - /* Set system to run at PLL208, max performance, a known state. */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Wait for the PLL208 to lock if not locked in yet */ - while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & - U300_SYSCON_CSR_PLL208_LOCK_IND)); - /* Initialize SPI device with some board specifics */ - u300_spi_init(&pl022_device); - - /* Register the AMBA devices in the AMBA bus abstraction layer */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - - u300_assign_physmem(); - - /* Register subdevices on the I2C buses */ - u300_i2c_register_board_devices(); + /* Initialize pinmuxing */ + pinctrl_register_mappings(u300_pinmux_map, + ARRAY_SIZE(u300_pinmux_map)); - /* Register subdevices on the SPI bus */ - u300_spi_register_board_devices(); + of_platform_populate(NULL, of_default_bus_match_table, + u300_auxdata_lookup, NULL); - /* Register the platform devices */ - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - -#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED - /* - * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when - * both subsystems are requesting this mode. - * If we not share the Acc SDRAM, this is never the case. Therefore - * enable it here from the App side. - */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) | + /* Enable SEMI self refresh */ + val = readw(syscon_base + U300_SYSCON_SMCR) | U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR); -#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */ + writew(val, syscon_base + U300_SYSCON_SMCR); } -static int core_module_init(void) -{ - /* - * This needs to be initialized later: it needs the input framework - * to be initialized first. - */ - return mmc_init(&mmcsd_device); -} -module_init(core_module_init); +static const char * u300_board_compat[] = { + "stericsson,u300", + NULL, +}; + +DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)") + .map_io = u300_map_io, + .init_irq = u300_init_irq_dt, + .init_time = clocksource_of_init, + .init_machine = u300_init_machine_dt, + .restart = u300_restart, + .dt_compat = u300_board_compat, +MACHINE_END diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 03f79361259..ec0283cf9a3 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -222,7 +222,7 @@ static ssize_t dummy_looptest(struct device *dev, static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL); -static int __devinit pl022_dummy_probe(struct spi_device *spi) +static int pl022_dummy_probe(struct spi_device *spi) { struct dummy *p_dummy; int status; @@ -251,7 +251,7 @@ out_dev_create_looptest_failed: return status; } -static int __devexit pl022_dummy_remove(struct spi_device *spi) +static int pl022_dummy_remove(struct spi_device *spi) { struct dummy *p_dummy = dev_get_drvdata(&spi->dev); @@ -263,28 +263,22 @@ static int __devexit pl022_dummy_remove(struct spi_device *spi) return 0; } +static const struct of_device_id pl022_dummy_dt_match[] = { + { .compatible = "arm,pl022-dummy" }, + {}, +}; + static struct spi_driver pl022_dummy_driver = { .driver = { .name = "spi-dummy", .owner = THIS_MODULE, + .of_match_table = pl022_dummy_dt_match, }, .probe = pl022_dummy_probe, - .remove = __devexit_p(pl022_dummy_remove), + .remove = pl022_dummy_remove, }; -static int __init pl022_init_dummy(void) -{ - return spi_register_driver(&pl022_dummy_driver); -} - -static void __exit pl022_exit_dummy(void) -{ - spi_unregister_driver(&pl022_dummy_driver); -} - -module_init(pl022_init_dummy); -module_exit(pl022_exit_dummy); - +module_spi_driver(pl022_dummy_driver); MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver"); MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c deleted file mode 100644 index d92790140fe..00000000000 --- a/arch/arm/mach-u300/gpio.c +++ /dev/null @@ -1,700 +0,0 @@ -/* - * - * arch/arm/mach-u300/gpio.c - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 GPIO module. - * This can driver either of the two basic GPIO cores - * available in the U300 platforms: - * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) - * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) - * Notice that you also have inline macros in <asm-arch/gpio.h> - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - * - */ -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -/* Reference to GPIO block clock */ -static struct clk *clk; - -/* Memory resource */ -static struct resource *memres; -static void __iomem *virtbase; -static struct device *gpiodev; - -struct u300_gpio_port { - const char *name; - int irq; - int number; -}; - - -static struct u300_gpio_port gpio_ports[] = { - { - .name = "gpio0", - .number = 0, - }, - { - .name = "gpio1", - .number = 1, - }, - { - .name = "gpio2", - .number = 2, - }, -#ifdef U300_COH901571_3 - { - .name = "gpio3", - .number = 3, - }, - { - .name = "gpio4", - .number = 4, - }, -#ifdef CONFIG_MACH_U300_BS335 - { - .name = "gpio5", - .number = 5, - }, - { - .name = "gpio6", - .number = 6, - }, -#endif -#endif - -}; - - -#ifdef U300_COH901571_3 - -/* Default input value */ -#define DEFAULT_OUTPUT_LOW 0 -#define DEFAULT_OUTPUT_HIGH 1 - -/* GPIO Pull-Up status */ -#define DISABLE_PULL_UP 0 -#define ENABLE_PULL_UP 1 - -#define GPIO_NOT_USED 0 -#define GPIO_IN 1 -#define GPIO_OUT 2 - -struct u300_gpio_configuration_data { - unsigned char pin_usage; - unsigned char default_output_value; - unsigned char pull_up; -}; - -/* Initial configuration */ -const struct u300_gpio_configuration_data -u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { -#ifdef CONFIG_MACH_U300_BS335 - /* Port 0, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 1, pins 0-7 */ - { - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 2, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 3, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 4, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 5, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 6, pind 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - } -#endif - -#ifdef CONFIG_MACH_U300_BS365 - /* Port 0, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 1, pins 0-7 */ - { - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 2, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 3, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 4, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - /* These 4 pins doesn't exist on DB3210 */ - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - } -#endif -}; -#endif - - -/* No users == we can power down GPIO */ -static int gpio_users; - -struct gpio_struct { - int (*callback)(void *); - void *data; - int users; -}; - -static struct gpio_struct gpio_pin[U300_GPIO_MAX]; - -/* - * Let drivers register callback in order to get notified when there is - * an interrupt on the gpio pin - */ -int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data) -{ - if (gpio_pin[gpio].callback) - dev_warn(gpiodev, "%s: WARNING: callback already " - "registered for gpio pin#%d\n", __func__, gpio); - gpio_pin[gpio].callback = func; - gpio_pin[gpio].data = data; - - return 0; -} -EXPORT_SYMBOL(gpio_register_callback); - -int gpio_unregister_callback(unsigned gpio) -{ - if (!gpio_pin[gpio].callback) - dev_warn(gpiodev, "%s: WARNING: callback already " - "unregistered for gpio pin#%d\n", __func__, gpio); - gpio_pin[gpio].callback = NULL; - gpio_pin[gpio].data = NULL; - - return 0; -} -EXPORT_SYMBOL(gpio_unregister_callback); - -/* Non-zero means valid */ -int gpio_is_valid(int number) -{ - if (number >= 0 && - number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT)) - return 1; - return 0; -} -EXPORT_SYMBOL(gpio_is_valid); - -int gpio_request(unsigned gpio, const char *label) -{ - if (gpio_pin[gpio].users) - return -EINVAL; - else - gpio_pin[gpio].users++; - - gpio_users++; - - return 0; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned gpio) -{ - gpio_users--; - gpio_pin[gpio].users--; - if (unlikely(gpio_pin[gpio].users < 0)) { - dev_warn(gpiodev, "warning: gpio#%d release mismatch\n", - gpio); - gpio_pin[gpio].users = 0; - } - - return; -} -EXPORT_SYMBOL(gpio_free); - -/* This returns zero or nonzero */ -int gpio_get_value(unsigned gpio) -{ - return readl(virtbase + U300_GPIO_PXPDIR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07)); -} -EXPORT_SYMBOL(gpio_get_value); - -/* - * We hope that the compiler will optimize away the unused branch - * in case "value" is a constant - */ -void gpio_set_value(unsigned gpio, int value) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - if (value) { - /* set */ - val = readl(virtbase + U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) - & (1 << (gpio & 0x07)); - writel(val | (1 << (gpio & 0x07)), virtbase + - U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } else { - /* clear */ - val = readl(virtbase + U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) - & (1 << (gpio & 0x07)); - writel(val & ~(1 << (gpio & 0x07)), virtbase + - U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_set_value); - -int gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - u32 val; - - if (gpio > U300_GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - /* Mask out this pin*/ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); - /* This is not needed since it sets the bits to zero.*/ - /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */ - writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - u32 val; - - if (gpio > U300_GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - /* Mask out this pin */ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); - /* - * FIXME: configure for push/pull, open drain or open source per pin - * in setup. The current driver will only support push/pull. - */ - val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL - << ((gpio & 0x07) << 1)); - writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - gpio_set_value(gpio, value); - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -/* - * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0). - */ -void enable_irq_on_gpio_pin(unsigned gpio, int edge) -{ - u32 val; - unsigned long flags; - local_irq_save(flags); - - val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val |= (1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - if (edge) - val |= (1 << (gpio & 0x07)); - else - val &= ~(1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); -} -EXPORT_SYMBOL(enable_irq_on_gpio_pin); - -void disable_irq_on_gpio_pin(unsigned gpio) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val &= ~(1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); -} -EXPORT_SYMBOL(disable_irq_on_gpio_pin); - -/* Enable (value == 0) or disable (value == 1) internal pullup */ -void gpio_pullup(unsigned gpio, int value) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - if (value) { - val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } else { - val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_pullup); - -static irqreturn_t gpio_irq_handler(int irq, void *dev_id) -{ - struct u300_gpio_port *port = dev_id; - u32 val; - int pin; - - /* Read event register */ - val = readl(virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Mask with enable register */ - val &= readl(virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Mask relevant bits */ - val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK; - /* ACK IRQ (clear event) */ - writel(val, virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Print message */ - while (val != 0) { - unsigned gpio; - - pin = __ffs(val); - /* mask off this pin */ - val &= ~(1 << pin); - gpio = (port->number << 3) + pin; - - if (gpio_pin[gpio].callback) - (void)gpio_pin[gpio].callback(gpio_pin[gpio].data); - else - dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n", - gpio); - } - return IRQ_HANDLED; -} - -static void gpio_set_initial_values(void) -{ -#ifdef U300_COH901571_3 - int i, j; - unsigned long flags; - u32 val; - - /* Write default values to all pins */ - for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { - val = 0; - for (j = 0; j < 8; j++) - val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j; - local_irq_save(flags); - writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } - - /* - * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' - * to output and 'GPIO_IN' to input for each port. And initialize - * default value on outputs. - */ - for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { - for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) { - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + - i * U300_GPIO_PORTX_SPACING); - /* Mask out this pin */ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1)); - - if (u300_gpio_config[i][j].pin_usage != GPIO_IN) - val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1)); - writel(val, virtbase + U300_GPIO_PXPCR + - i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } - } - - /* Enable or disable the internal pull-ups in the GPIO ASIC block */ - for (i = 0; i < U300_GPIO_MAX; i++) { - val = 0; - for (j = 0; j < 8; j++) - val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j); - local_irq_save(flags); - writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } -#endif -} - -static int __init gpio_probe(struct platform_device *pdev) -{ - u32 val; - int err = 0; - int i; - int num_irqs; - - gpiodev = &pdev->dev; - memset(gpio_pin, 0, sizeof(gpio_pin)); - - /* Get GPIO clock */ - clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - err = PTR_ERR(clk); - dev_err(gpiodev, "could not get GPIO clock\n"); - goto err_no_clk; - } - err = clk_enable(clk); - if (err) { - dev_err(gpiodev, "could not enable GPIO clock\n"); - goto err_no_clk_enable; - } - - memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memres) - goto err_no_resource; - - if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller") - == NULL) { - err = -ENODEV; - goto err_no_ioregion; - } - - virtbase = ioremap(memres->start, resource_size(memres)); - if (!virtbase) { - err = -ENOMEM; - goto err_no_ioremap; - } - dev_info(gpiodev, "remapped 0x%08x to %p\n", - memres->start, virtbase); - -#ifdef U300_COH901335 - dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n"); - /* Turn on the GPIO block */ - writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR); -#endif - -#ifdef U300_COH901571_3 - dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n"); - val = readl(virtbase + U300_GPIO_CR); - dev_info(gpiodev, "COH901571/3 block version: %d, " \ - "number of cores: %d\n", - ((val & 0x0000FE00) >> 9), - ((val & 0x000001FC) >> 2)); - writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); -#endif - - gpio_set_initial_values(); - - for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { - - gpio_ports[num_irqs].irq = - platform_get_irq_byname(pdev, - gpio_ports[num_irqs].name); - - err = request_irq(gpio_ports[num_irqs].irq, - gpio_irq_handler, IRQF_DISABLED, - gpio_ports[num_irqs].name, - &gpio_ports[num_irqs]); - if (err) { - dev_err(gpiodev, "cannot allocate IRQ for %s!\n", - gpio_ports[num_irqs].name); - goto err_no_irq; - } - /* Turns off PortX_irq_force */ - writel(0x0, virtbase + U300_GPIO_PXIFR + - num_irqs * U300_GPIO_PORTX_SPACING); - } - - return 0; - - err_no_irq: - for (i = 0; i < num_irqs; i++) - free_irq(gpio_ports[i].irq, &gpio_ports[i]); - iounmap(virtbase); - err_no_ioremap: - release_mem_region(memres->start, memres->end - memres->start); - err_no_ioregion: - err_no_resource: - clk_disable(clk); - err_no_clk_enable: - clk_put(clk); - err_no_clk: - dev_info(gpiodev, "module ERROR:%d\n", err); - return err; -} - -static int __exit gpio_remove(struct platform_device *pdev) -{ - int i; - - /* Turn off the GPIO block */ - writel(0x00000000U, virtbase + U300_GPIO_CR); - for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++) - free_irq(gpio_ports[i].irq, &gpio_ports[i]); - iounmap(virtbase); - release_mem_region(memres->start, memres->end - memres->start); - clk_disable(clk); - clk_put(clk); - return 0; -} - -static struct platform_driver gpio_driver = { - .driver = { - .name = "u300-gpio", - }, - .remove = __exit_p(gpio_remove), -}; - - -static int __init u300_gpio_init(void) -{ - return platform_driver_probe(&gpio_driver, gpio_probe); -} - -static void __exit u300_gpio_exit(void) -{ - platform_driver_unregister(&gpio_driver); -} - -arch_initcall(u300_gpio_init); -module_exit(u300_gpio_exit); - -MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); - -#ifdef U300_COH901571_3 -MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver"); -#endif - -#ifdef U300_COH901335 -MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver"); -#endif - -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c deleted file mode 100644 index f0394baa11f..00000000000 --- a/arch/arm/mach-u300/i2c.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * arch/arm/mach-u300/i2c.c - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Register board i2c devices - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/mfd/abx500.h> -#include <linux/regulator/machine.h> -#include <linux/amba/bus.h> -#include <mach/irqs.h> - -/* - * Initial settings of ab3100 registers. - * Common for below LDO regulator settings are that - * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0). - * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode. - */ - -/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */ -#define LDO_A_SETTING 0x16 -/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_C_SETTING 0x10 -/* LDO_D 0x10: 2.65V, ON, sleep mode not used */ -#define LDO_D_SETTING 0x10 -/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_E_SETTING 0x10 -/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */ -#define LDO_E_SLEEP_SETTING 0x00 -/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_F_SETTING 0xD0 -/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */ -#define LDO_G_SETTING 0x00 -/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */ -#define LDO_H_SETTING 0x18 -/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */ -#define LDO_K_SETTING 0x00 -/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */ -#define LDO_EXT_SETTING 0x00 -/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */ -#define BUCK_SETTING 0x7D -/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ -#define BUCK_SLEEP_SETTING 0xAC - -#ifdef CONFIG_AB3100_CORE -static struct regulator_consumer_supply supply_ldo_c[] = { - { - .dev_name = "ab3100-codec", - .supply = "vaudio", /* Powers the codec */ - }, -}; - -/* - * This one needs to be a supply so we can turn it off - * in order to shut down the system. - */ -static struct regulator_consumer_supply supply_ldo_d[] = { - { - .dev = NULL, - .supply = "vana15", /* Powers the SoC (CPU etc) */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_g[] = { - { - .dev_name = "mmci", - .supply = "vmmc", /* Powers MMC/SD card */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_h[] = { - { - .dev_name = "xgam_pdi", - .supply = "vdisp", /* Powers camera, display etc */ - }, -}; - -static struct regulator_consumer_supply supply_ldo_k[] = { - { - .dev_name = "irda", - .supply = "vir", /* Power IrDA */ - }, -}; - -/* - * This is a placeholder for whoever wish to use the - * external power. - */ -static struct regulator_consumer_supply supply_ldo_ext[] = { - { - .dev = NULL, - .supply = "vext", /* External power */ - }, -}; - -/* Preset (hardware defined) voltages for these regulators */ -#define LDO_A_VOLTAGE 2750000 -#define LDO_C_VOLTAGE 2650000 -#define LDO_D_VOLTAGE 2650000 - -static struct ab3100_platform_data ab3100_plf_data = { - .reg_constraints = { - /* LDO A routing and constraints */ - { - .constraints = { - .name = "vrad", - .min_uV = LDO_A_VOLTAGE, - .max_uV = LDO_A_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO C routing and constraints */ - { - .constraints = { - .min_uV = LDO_C_VOLTAGE, - .max_uV = LDO_C_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c), - .consumer_supplies = supply_ldo_c, - }, - /* LDO D routing and constraints */ - { - .constraints = { - .min_uV = LDO_D_VOLTAGE, - .max_uV = LDO_D_VOLTAGE, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - /* - * Actually this is boot_on but we need - * to reference count it externally to - * be able to shut down the system. - */ - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d), - .consumer_supplies = supply_ldo_d, - }, - /* LDO E routing and constraints */ - { - .constraints = { - .name = "vio", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO F routing and constraints */ - { - .constraints = { - .name = "vana25", - .min_uV = 2500000, - .max_uV = 2500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .always_on = 1, - .boot_on = 1, - }, - }, - /* LDO G routing and constraints */ - { - .constraints = { - .min_uV = 1500000, - .max_uV = 2850000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g), - .consumer_supplies = supply_ldo_g, - }, - /* LDO H routing and constraints */ - { - .constraints = { - .min_uV = 1200000, - .max_uV = 2750000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h), - .consumer_supplies = supply_ldo_h, - }, - /* LDO K routing and constraints */ - { - .constraints = { - .min_uV = 1800000, - .max_uV = 2750000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k), - .consumer_supplies = supply_ldo_k, - }, - /* External regulator interface. No fixed voltage specified. - * If we knew the voltage of the external regulator and it - * was connected on the board, we could add the (fixed) - * voltage for it here. - */ - { - .constraints = { - .min_uV = 0, - .max_uV = 0, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext), - .consumer_supplies = supply_ldo_ext, - }, - /* Buck converter routing and constraints */ - { - .constraints = { - .name = "vcore", - .min_uV = 1200000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .always_on = 1, - .boot_on = 1, - }, - }, - }, - .reg_initvals = { - LDO_A_SETTING, - LDO_C_SETTING, - LDO_E_SETTING, - LDO_E_SLEEP_SETTING, - LDO_F_SETTING, - LDO_G_SETTING, - LDO_H_SETTING, - LDO_K_SETTING, - LDO_EXT_SETTING, - BUCK_SETTING, - BUCK_SLEEP_SETTING, - LDO_D_SETTING, - }, -}; -#endif - -#ifdef CONFIG_AB3550_CORE -static struct abx500_init_settings ab3550_init_settings[] = { - { - .bank = 0, - .reg = AB3550_IMR1, - .setting = 0xff - }, - { - .bank = 0, - .reg = AB3550_IMR2, - .setting = 0xff - }, - { - .bank = 0, - .reg = AB3550_IMR3, - .setting = 0xff - }, - { - .bank = 0, - .reg = AB3550_IMR4, - .setting = 0xff - }, - { - .bank = 0, - .reg = AB3550_IMR5, - /* The two most significant bits are not used */ - .setting = 0x3f - }, -}; - -static struct ab3550_platform_data ab3550_plf_data = { - .irq = { - .base = IRQ_AB3550_BASE, - .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1), - }, - .dev_data = { - }, - .init_settings = ab3550_init_settings, - .init_settings_sz = ARRAY_SIZE(ab3550_init_settings), -}; -#endif - -static struct i2c_board_info __initdata bus0_i2c_board_info[] = { -#if defined(CONFIG_AB3550_CORE) - { - .type = "ab3550", - .addr = 0x4A, - .irq = IRQ_U300_IRQ0_EXT, - .platform_data = &ab3550_plf_data, - }, -#elif defined(CONFIG_AB3100_CORE) - { - .type = "ab3100", - .addr = 0x48, - .irq = IRQ_U300_IRQ0_EXT, - .platform_data = &ab3100_plf_data, - }, -#else - { }, -#endif -}; - -static struct i2c_board_info __initdata bus1_i2c_board_info[] = { -#ifdef CONFIG_MACH_U300_BS335 - { - .type = "fwcam", - .addr = 0x10, - }, - { - .type = "fwcam", - .addr = 0x5d, - }, -#else - { }, -#endif -}; - -void __init u300_i2c_register_board_devices(void) -{ - i2c_register_board_info(0, bus0_i2c_board_info, - ARRAY_SIZE(bus0_i2c_board_info)); - /* - * This makes the core shut down all unused regulators - * after all the initcalls have completed. - */ - regulator_has_full_constraints(); - i2c_register_board_info(1, bus1_i2c_board_info, - ARRAY_SIZE(bus1_i2c_board_info)); -} diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h deleted file mode 100644 index 485c02e5c06..00000000000 --- a/arch/arm/mach-u300/i2c.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-u300/i2c.h - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Register board i2c devices - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef MACH_U300_I2C_H -#define MACH_U300_I2C_H - -#ifdef CONFIG_I2C_STU300 -void __init u300_i2c_register_board_devices(void); -#else -/* Compile out this stuff if no I2C adapter is available */ -static inline void __init u300_i2c_register_board_devices(void) -{ -} -#endif - -#endif diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h deleted file mode 100644 index 92e3cc872c6..00000000000 --- a/arch/arm/mach-u300/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -int __clk_get(struct clk *clk); -void __clk_put(struct clk *clk); - -#endif diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h deleted file mode 100644 index 193da2df732..00000000000 --- a/arch/arm/mach-u300/include/mach/coh901318.h +++ /dev/null @@ -1,260 +0,0 @@ -/* - * - * include/linux/coh901318.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * DMA driver for COH 901 318 - * Author: Per Friden <per.friden@stericsson.com> - */ - -#ifndef COH901318_H -#define COH901318_H - -#include <linux/device.h> -#include <linux/dmaengine.h> - -#define MAX_DMA_PACKET_SIZE_SHIFT 11 -#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT) - -/** - * struct coh901318_lli - linked list item for DMAC - * @control: control settings for DMAC - * @src_addr: transfer source address - * @dst_addr: transfer destination address - * @link_addr: physical address to next lli - * @virt_link_addr: virtual addres of next lli (only used by pool_free) - * @phy_this: physical address of current lli (only used by pool_free) - */ -struct coh901318_lli { - u32 control; - dma_addr_t src_addr; - dma_addr_t dst_addr; - dma_addr_t link_addr; - - void *virt_link_addr; - dma_addr_t phy_this; -}; -/** - * struct coh901318_params - parameters for DMAC configuration - * @config: DMA config register - * @ctrl_lli_last: DMA control register for the last lli in the list - * @ctrl_lli: DMA control register for an lli - * @ctrl_lli_chained: DMA control register for a chained lli - */ -struct coh901318_params { - u32 config; - u32 ctrl_lli_last; - u32 ctrl_lli; - u32 ctrl_lli_chained; -}; -/** - * struct coh_dma_channel - dma channel base - * @name: ascii name of dma channel - * @number: channel id number - * @desc_nbr_max: number of preallocated descriptors - * @priority_high: prio of channel, 0 low otherwise high. - * @param: configuration parameters - * @dev_addr: physical address of periphal connected to channel - */ -struct coh_dma_channel { - const char name[32]; - const int number; - const int desc_nbr_max; - const int priority_high; - const struct coh901318_params param; - const dma_addr_t dev_addr; -}; - -/** - * dma_access_memory_state_t - register dma for memory access - * - * @dev: The dma device - * @active: 1 means dma intends to access memory - * 0 means dma wont access memory - */ -typedef void (*dma_access_memory_state_t)(struct device *dev, - bool active); - -/** - * struct powersave - DMA power save structure - * @lock: lock protecting data in this struct - * @started_channels: bit mask indicating active dma channels - */ -struct powersave { - spinlock_t lock; - u64 started_channels; -}; -/** - * struct coh901318_platform - platform arch structure - * @chans_slave: specifying dma slave channels - * @chans_memcpy: specifying dma memcpy channels - * @access_memory_state: requesting DMA memeory access (on / off) - * @chan_conf: dma channel configurations - * @max_channels: max number of dma chanenls - */ -struct coh901318_platform { - const int *chans_slave; - const int *chans_memcpy; - const dma_access_memory_state_t access_memory_state; - const struct coh_dma_channel *chan_conf; - const int max_channels; -}; - -/** - * coh901318_filter_id() - DMA channel filter function - * @chan: dma channel handle - * @chan_id: id of dma channel to be filter out - * - * In dma_request_channel() it specifies what channel id to be requested - */ -bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); - -/* - * DMA Controller - this access the static mappings of the coh901318 dma. - * - */ - -#define COH901318_MOD32_MASK (0x1F) -#define COH901318_WORD_MASK (0xFFFFFFFF) -/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */ -#define COH901318_INT_STATUS1 (0x0000) -#define COH901318_INT_STATUS2 (0x0004) -/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */ -#define COH901318_TC_INT_STATUS1 (0x0008) -#define COH901318_TC_INT_STATUS2 (0x000C) -/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */ -#define COH901318_TC_INT_CLEAR1 (0x0010) -#define COH901318_TC_INT_CLEAR2 (0x0014) -/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ -#define COH901318_RAW_TC_INT_STATUS1 (0x0018) -#define COH901318_RAW_TC_INT_STATUS2 (0x001C) -/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */ -#define COH901318_BE_INT_STATUS1 (0x0020) -#define COH901318_BE_INT_STATUS2 (0x0024) -/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */ -#define COH901318_BE_INT_CLEAR1 (0x0028) -#define COH901318_BE_INT_CLEAR2 (0x002C) -/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ -#define COH901318_RAW_BE_INT_STATUS1 (0x0030) -#define COH901318_RAW_BE_INT_STATUS2 (0x0034) - -/* - * CX_CFG - Channel Configuration Registers 32bit (R/W) - */ -#define COH901318_CX_CFG (0x0100) -#define COH901318_CX_CFG_SPACING (0x04) -/* Channel enable activates tha dma job */ -#define COH901318_CX_CFG_CH_ENABLE (0x00000001) -#define COH901318_CX_CFG_CH_DISABLE (0x00000000) -/* Request Mode */ -#define COH901318_CX_CFG_RM_MASK (0x00000006) -#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY (0x0 << 1) -#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY (0x1 << 1) -#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY (0x1 << 1) -#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY (0x3 << 1) -#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY (0x3 << 1) -/* Linked channel request field. RM must == 11 */ -#define COH901318_CX_CFG_LCRF_SHIFT 3 -#define COH901318_CX_CFG_LCRF_MASK (0x000001F8) -#define COH901318_CX_CFG_LCR_DISABLE (0x00000000) -/* Terminal Counter Interrupt Request Mask */ -#define COH901318_CX_CFG_TC_IRQ_ENABLE (0x00000200) -#define COH901318_CX_CFG_TC_IRQ_DISABLE (0x00000000) -/* Bus Error interrupt Mask */ -#define COH901318_CX_CFG_BE_IRQ_ENABLE (0x00000400) -#define COH901318_CX_CFG_BE_IRQ_DISABLE (0x00000000) - -/* - * CX_STAT - Channel Status Registers 32bit (R/-) - */ -#define COH901318_CX_STAT (0x0200) -#define COH901318_CX_STAT_SPACING (0x04) -#define COH901318_CX_STAT_RBE_IRQ_IND (0x00000008) -#define COH901318_CX_STAT_RTC_IRQ_IND (0x00000004) -#define COH901318_CX_STAT_ACTIVE (0x00000002) -#define COH901318_CX_STAT_ENABLED (0x00000001) - -/* - * CX_CTRL - Channel Control Registers 32bit (R/W) - */ -#define COH901318_CX_CTRL (0x0400) -#define COH901318_CX_CTRL_SPACING (0x10) -/* Transfer Count Enable */ -#define COH901318_CX_CTRL_TC_ENABLE (0x00001000) -#define COH901318_CX_CTRL_TC_DISABLE (0x00000000) -/* Transfer Count Value 0 - 4095 */ -#define COH901318_CX_CTRL_TC_VALUE_MASK (0x00000FFF) -/* Burst count */ -#define COH901318_CX_CTRL_BURST_COUNT_MASK (0x0000E000) -#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES (0x7 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES (0x6 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES (0x5 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES (0x4 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES (0x3 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES (0x2 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES (0x1 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE (0x0 << 13) -/* Source bus size */ -#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK (0x00030000) -#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS (0x2 << 16) -#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS (0x1 << 16) -#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS (0x0 << 16) -/* Source address increment */ -#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE (0x00040000) -#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE (0x00000000) -/* Destination Bus Size */ -#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK (0x00180000) -#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS (0x2 << 19) -#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS (0x1 << 19) -#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS (0x0 << 19) -/* Destination address increment */ -#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE (0x00200000) -#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE (0x00000000) -/* Master Mode (Master2 is only connected to MSL) */ -#define COH901318_CX_CTRL_MASTER_MODE_MASK (0x00C00000) -#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W (0x3 << 22) -#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W (0x2 << 22) -#define COH901318_CX_CTRL_MASTER_MODE_M2RW (0x1 << 22) -#define COH901318_CX_CTRL_MASTER_MODE_M1RW (0x0 << 22) -/* Terminal Count flag to PER enable */ -#define COH901318_CX_CTRL_TCP_ENABLE (0x01000000) -#define COH901318_CX_CTRL_TCP_DISABLE (0x00000000) -/* Terminal Count flags to CPU enable */ -#define COH901318_CX_CTRL_TC_IRQ_ENABLE (0x02000000) -#define COH901318_CX_CTRL_TC_IRQ_DISABLE (0x00000000) -/* Hand shake to peripheral */ -#define COH901318_CX_CTRL_HSP_ENABLE (0x04000000) -#define COH901318_CX_CTRL_HSP_DISABLE (0x00000000) -#define COH901318_CX_CTRL_HSS_ENABLE (0x08000000) -#define COH901318_CX_CTRL_HSS_DISABLE (0x00000000) -/* DMA mode */ -#define COH901318_CX_CTRL_DDMA_MASK (0x30000000) -#define COH901318_CX_CTRL_DDMA_LEGACY (0x0 << 28) -#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1 (0x1 << 28) -#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2 (0x2 << 28) -/* Primary Request Data Destination */ -#define COH901318_CX_CTRL_PRDD_MASK (0x40000000) -#define COH901318_CX_CTRL_PRDD_DEST (0x1 << 30) -#define COH901318_CX_CTRL_PRDD_SOURCE (0x0 << 30) - -/* - * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W) - */ -#define COH901318_CX_SRC_ADDR (0x0404) -#define COH901318_CX_SRC_ADDR_SPACING (0x10) - -/* - * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W - */ -#define COH901318_CX_DST_ADDR (0x0408) -#define COH901318_CX_DST_ADDR_SPACING (0x10) - -/* - * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W) - */ -#define COH901318_CX_LNK_ADDR (0x040C) -#define COH901318_CX_LNK_ADDR_SPACING (0x10) -#define COH901318_CX_LNK_LINK_IMMEDIATE (0x00000001) -#endif /* COH901318_H */ diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S deleted file mode 100644 index df715707bea..00000000000 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * - * arch-arm/mach-u300/include/mach/debug-macro.S - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Debugging macro include header. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <mach/hardware.h> - - .macro addruart, rp, rv - /* If we move the address using MMU, use this. */ - ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address - ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address - orr \rp, \rp, #0x00003000 - orr \rv, \rv, #0x00003000 - .endm - -#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/include/mach/dma_channels.h deleted file mode 100644 index b239149ba0d..00000000000 --- a/arch/arm/mach-u300/include/mach/dma_channels.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/dma_channels.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Map file for the U300 dma driver. - * Author: Per Friden <per.friden@stericsson.com> - */ - -#ifndef DMA_CHANNELS_H -#define DMA_CHANNELS_H - -#define U300_DMA_MSL_TX_0 0 -#define U300_DMA_MSL_TX_1 1 -#define U300_DMA_MSL_TX_2 2 -#define U300_DMA_MSL_TX_3 3 -#define U300_DMA_MSL_TX_4 4 -#define U300_DMA_MSL_TX_5 5 -#define U300_DMA_MSL_TX_6 6 -#define U300_DMA_MSL_RX_0 7 -#define U300_DMA_MSL_RX_1 8 -#define U300_DMA_MSL_RX_2 9 -#define U300_DMA_MSL_RX_3 10 -#define U300_DMA_MSL_RX_4 11 -#define U300_DMA_MSL_RX_5 12 -#define U300_DMA_MSL_RX_6 13 -#define U300_DMA_MMCSD_RX_TX 14 -#define U300_DMA_MSPRO_TX 15 -#define U300_DMA_MSPRO_RX 16 -#define U300_DMA_UART0_TX 17 -#define U300_DMA_UART0_RX 18 -#define U300_DMA_APEX_TX 19 -#define U300_DMA_APEX_RX 20 -#define U300_DMA_PCM_I2S0_TX 21 -#define U300_DMA_PCM_I2S0_RX 22 -#define U300_DMA_PCM_I2S1_TX 23 -#define U300_DMA_PCM_I2S1_RX 24 -#define U300_DMA_XGAM_CDI 25 -#define U300_DMA_XGAM_PDI 26 -#define U300_DMA_SPI_TX 27 -#define U300_DMA_SPI_RX 28 -#define U300_DMA_GENERAL_PURPOSE_0 29 -#define U300_DMA_GENERAL_PURPOSE_1 30 -#define U300_DMA_GENERAL_PURPOSE_2 31 -#define U300_DMA_GENERAL_PURPOSE_3 32 -#define U300_DMA_GENERAL_PURPOSE_4 33 -#define U300_DMA_GENERAL_PURPOSE_5 34 -#define U300_DMA_GENERAL_PURPOSE_6 35 -#define U300_DMA_GENERAL_PURPOSE_7 36 -#define U300_DMA_GENERAL_PURPOSE_8 37 -#ifdef CONFIG_MACH_U300_BS335 -#define U300_DMA_UART1_TX 38 -#define U300_DMA_UART1_RX 39 -#else -#define U300_DMA_GENERAL_PURPOSE_9 38 -#define U300_DMA_GENERAL_PURPOSE_10 39 -#endif - -#ifdef CONFIG_MACH_U300_BS335 -#define U300_DMA_DEVICE_CHANNELS 32 -#else -#define U300_DMA_DEVICE_CHANNELS 30 -#endif -#define U300_DMA_CHANNELS 40 - - -#endif /* DMA_CHANNELS_H */ diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S deleted file mode 100644 index 20731ae39d3..00000000000 --- a/arch/arm/mach-u300/include/mach/entry-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * - * arch-arm/mach-u300/include/mach/entry-macro.S - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Low-level IRQ helper macros for ST-Ericsson U300 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <mach/hardware.h> -#include <asm/hardware/vic.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status - mov \irqnr, #0 - teq \irqstat, #0 - bne 1002f -1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status - mov \irqnr, #32 - teq \irqstat, #0 - beq 1003f -1002: tst \irqstat, #1 - bne 1003f - add \irqnr, \irqnr, #1 - movs \irqstat, \irqstat, lsr #1 - bne 1002b -1003: /* EQ will be set if no irqs pending */ - .endm diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h deleted file mode 100644 index d5a71abcbae..00000000000 --- a/arch/arm/mach-u300/include/mach/gpio.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/gpio.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * GPIO block resgister definitions and inline macros for - * U300 GPIO COH 901 335 or COH 901 571/3 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_GPIO_H -#define __MACH_U300_GPIO_H - -#include <linux/kernel.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/irq.h> - -/* Switch type depending on platform/chip variant */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_COH901335 -#endif -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) -#define U300_COH901571_3 -#endif - -/* Get base address for regs here */ -#include "u300-regs.h" -/* IRQ numbers */ -#include "irqs.h" - -/* - * This is the GPIO block definitions. GPIO (General Purpose I/O) can be - * used for anything, and often is. The event/enable etc figures are for - * the lowermost pin (pin 0 on each port), shift this left to match your - * pin if you're gonna use these values. - */ -#ifdef U300_COH901335 -#define U300_GPIO_PORTX_SPACING (0x1C) -/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ -#define U300_GPIO_PXPDIR (0x00) -#define U300_GPIO_PXPDOR (0x00) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_GPIO_PXPCR (0x04) -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_GPIO_PXIEV (0x08) -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_GPIO_PXIEN (0x0C) -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_GPIO_PXIFR (0x10) -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_GPIO_PXICR (0x14) -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_GPIO_PXPER (0x18) -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Control Register 32bit (R/W) */ -#define U300_GPIO_CR (0x54) -#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) -/* three ports of 8 bits each = GPIO pins 0..23 */ -#define U300_GPIO_NUM_PORTS 3 -#define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) -#endif - -#ifdef U300_COH901571_3 -/* - * Control Register 32bit (R/W) - * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores - * gives the number of GPIO pins. - * bit 8-2 (mask 0x000001FC) contains the core version ID. - */ -#define U300_GPIO_CR (0x00) -#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) -#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) -#define U300_GPIO_PORTX_SPACING (0x30) -/* Port X Pin Data INPUT Register 32bit (R/W) */ -#define U300_GPIO_PXPDIR (0x04) -/* Port X Pin Data OUTPUT Register 32bit (R/W) */ -#define U300_GPIO_PXPDOR (0x08) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_GPIO_PXPCR (0x0C) -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_GPIO_PXPER (0x10) -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_GPIO_PXIEV (0x14) -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL) -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_GPIO_PXIEN (0x18) -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_GPIO_PXIFR (0x1C) -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL) -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_GPIO_PXICR (0x20) -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -#ifdef CONFIG_MACH_U300_BS335 -/* seven ports of 8 bits each = GPIO pins 0..55 */ -#define U300_GPIO_NUM_PORTS 7 -#else -/* five ports of 8 bits each = GPIO pins 0..39 */ -#define U300_GPIO_NUM_PORTS 5 -#endif -#define U300_GPIO_PINS_PER_PORT 8 -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1) -#endif - -/* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. - * Notice that the actual usage of these pins depends on the - * PAD MUX settings, that is why the same number can potentially - * appear several times. In the reference design each pin is only - * used for one purpose. These were determined by inspecting the - * S365 schematic. - */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_UART_CTS 2 -#define U300_GPIO_PIN_UART_RTS 3 -#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */ -#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */ -#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */ -#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */ - -#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */ -#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */ -#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */ -#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */ -#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */ -#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */ -#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */ -#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */ -#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */ -#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */ -#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */ -#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */ -#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */ -#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */ -#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */ -#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */ -#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */ -#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */ -#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */ -#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ -#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ - -#ifdef CONFIG_MACH_U300_BS335 - -#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ -#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ -#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ -#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */ -#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */ -#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */ -#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */ -#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */ -#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */ -#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */ -#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */ -#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */ -#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ -#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ -#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif - -/* translates a pin number to a port number */ -#define PIN_TO_PORT(val) (val >> 3) - -/* These can be found in arch/arm/mach-u300/gpio.c */ -extern int gpio_is_valid(int number); -extern int gpio_request(unsigned gpio, const char *label); -extern void gpio_free(unsigned gpio); -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); -extern int gpio_register_callback(unsigned gpio, - int (*func)(void *arg), - void *); -extern int gpio_unregister_callback(unsigned gpio); -extern void enable_irq_on_gpio_pin(unsigned gpio, int edge); -extern void disable_irq_on_gpio_pin(unsigned gpio); -extern void gpio_pullup(unsigned gpio, int value); -extern int gpio_get_value(unsigned gpio); -extern void gpio_set_value(unsigned gpio, int value); - -#define gpio_get_value_cansleep gpio_get_value -#define gpio_set_value_cansleep gpio_set_value - -/* wrappers to sleep-enable the previous two functions */ -static inline unsigned gpio_to_irq(unsigned gpio) -{ - return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0; -} - -static inline unsigned irq_to_gpio(unsigned irq) -{ - /* - * FIXME: This is no 1-1 mapping at all, it points to the - * whole block of 8 pins. - */ - return (irq - IRQ_U300_GPIO_PORT0) << 3; -} - -#endif diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h deleted file mode 100644 index b99d4ce0ac2..00000000000 --- a/arch/arm/mach-u300/include/mach/hardware.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/hardware.h - */ -#include <asm/sizes.h> -#include <mach/u300-regs.h> diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h deleted file mode 100644 index 5d6b4c13b3a..00000000000 --- a/arch/arm/mach-u300/include/mach/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/io.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Dummy IO map for being able to use writew()/readw(), - * writel()/readw() and similar accessor functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#ifndef __MACH_IO_H -#define __MACH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h deleted file mode 100644 index 09b1b28fa8f..00000000000 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/irqs.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * IRQ channel definitions for the U300 platforms. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define IRQ_U300_INTCON0_START 0 -#define IRQ_U300_INTCON1_START 32 -/* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 0 -#define IRQ_U300_IRQ1_EXT 1 -#define IRQ_U300_DMA 2 -#define IRQ_U300_VIDEO_ENC_0 3 -#define IRQ_U300_VIDEO_ENC_1 4 -#define IRQ_U300_AAIF_RX 5 -#define IRQ_U300_AAIF_TX 6 -#define IRQ_U300_AAIF_VGPIO 7 -#define IRQ_U300_AAIF_WAKEUP 8 -#define IRQ_U300_PCM_I2S0_FRAME 9 -#define IRQ_U300_PCM_I2S0_FIFO 10 -#define IRQ_U300_PCM_I2S1_FRAME 11 -#define IRQ_U300_PCM_I2S1_FIFO 12 -#define IRQ_U300_XGAM_GAMCON 13 -#define IRQ_U300_XGAM_CDI 14 -#define IRQ_U300_XGAM_CDICON 15 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -/* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 16 -#endif -#define IRQ_U300_XGAM_PDI 17 -#define IRQ_U300_XGAM_PDICON 18 -#define IRQ_U300_XGAM_GAMEACC 19 -#define IRQ_U300_XGAM_MCIDCT 20 -#define IRQ_U300_APEX 21 -#define IRQ_U300_UART0 22 -#define IRQ_U300_SPI 23 -#define IRQ_U300_TIMER_APP_OS 24 -#define IRQ_U300_TIMER_APP_DD 25 -#define IRQ_U300_TIMER_APP_GP1 26 -#define IRQ_U300_TIMER_APP_GP2 27 -#define IRQ_U300_TIMER_OS 28 -#define IRQ_U300_TIMER_MS 29 -#define IRQ_U300_KEYPAD_KEYBF 30 -#define IRQ_U300_KEYPAD_KEYBR 31 -/* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 32 -#define IRQ_U300_GPIO_PORT1 33 -#define IRQ_U300_GPIO_PORT2 34 - -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ - defined(CONFIG_MACH_U300_BS335) -/* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 35 -#define IRQ_U300_EVHIST 36 -#define IRQ_U300_MSPRO 37 -#define IRQ_U300_MMCSD_MCIINTR0 38 -#define IRQ_U300_MMCSD_MCIINTR1 39 -#define IRQ_U300_I2C0 40 -#define IRQ_U300_I2C1 41 -#define IRQ_U300_RTC 42 -#define IRQ_U300_NFIF 43 -#define IRQ_U300_NFIF2 44 -#endif - -/* DB3150 and DB3200 have only 45 IRQs */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_NR_IRQS 45 -#endif - -/* The DB3350-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS335 -#define IRQ_U300_ISP_F0 45 -#define IRQ_U300_ISP_F1 46 -#define IRQ_U300_ISP_F2 47 -#define IRQ_U300_ISP_F3 48 -#define IRQ_U300_ISP_F4 49 -#define IRQ_U300_GPIO_PORT3 50 -#define IRQ_U300_SYSCON_PLL_LOCK 51 -#define IRQ_U300_UART1 52 -#define IRQ_U300_GPIO_PORT4 53 -#define IRQ_U300_GPIO_PORT5 54 -#define IRQ_U300_GPIO_PORT6 55 -#define U300_NR_IRQS 56 -#endif - -/* The DB3210-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 35 -#define IRQ_U300_GPIO_PORT4 36 -#define IRQ_U300_WDOG 37 -#define IRQ_U300_EVHIST 38 -#define IRQ_U300_MSPRO 39 -#define IRQ_U300_MMCSD_MCIINTR0 40 -#define IRQ_U300_MMCSD_MCIINTR1 41 -#define IRQ_U300_I2C0 42 -#define IRQ_U300_I2C1 43 -#define IRQ_U300_RTC 44 -#define IRQ_U300_NFIF 45 -#define IRQ_U300_NFIF2 46 -#define IRQ_U300_SYSCON_PLL_LOCK 47 -#define U300_NR_IRQS 48 -#endif - -#ifdef CONFIG_AB3550_CORE -#define IRQ_AB3550_BASE (U300_NR_IRQS) -#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37) - -#define NR_IRQS (IRQ_AB3550_END + 1) -#else -#define NR_IRQS U300_NR_IRQS -#endif - -#endif diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h deleted file mode 100644 index bf134bcc129..00000000000 --- a/arch/arm/mach-u300/include/mach/memory.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/memory.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Memory virtual/physical mapping constants. - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ - -#ifndef __MACH_MEMORY_H -#define __MACH_MEMORY_H - -#ifdef CONFIG_MACH_U300_DUAL_RAM - -#define PHYS_OFFSET UL(0x48000000) -#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100) - -#else - -#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX -#define PHYS_OFFSET (0x28000000 + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) -#else -#define PHYS_OFFSET (0x28000000 + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) -#endif -#define BOOT_PARAMS_OFFSET (0x28000000 + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ - (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100) -#endif - -/* - * We enable a real big DMA buffer if need be. - */ -#define CONSISTENT_DMA_SIZE SZ_4M - -#endif diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h deleted file mode 100644 index 77d9210a82e..00000000000 --- a/arch/arm/mach-u300/include/mach/platform.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/platform.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Basic platform init and mapping functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __ASSEMBLY__ - -void u300_map_io(void); -void u300_init_irq(void); -void u300_init_devices(void); -extern struct sys_timer u300_timer; - -#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h deleted file mode 100644 index 7444f5c7da9..00000000000 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ /dev/null @@ -1,750 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/syscon.h - * - * - * Copyright (C) 2008 ST-Ericsson AB - * - * Author: Rickard Andersson <rickard.andersson@stericsson.com> - */ - -#ifndef __MACH_SYSCON_H -#define __MACH_SYSCON_H - -/* - * All register defines for SYSCON registers that concerns individual - * block clocks and reset lines are registered here. This is because - * we don't want any other file to try to fool around with this stuff. - */ - -/* APP side SYSCON registers */ -/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */ -/* CLK Control Register 16bit (R/W) */ -#define U300_SYSCON_CCR (0x0000) -#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) -#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) -#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) -#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) -/* CLK Status Register 16bit (R/W) */ -#define U300_SYSCON_CSR (0x0004) -#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) -#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) -/* Reset lines for SLOW devices 16bit (R/W) */ -#define U300_SYSCON_RSR (0x0014) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) -#endif -#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) -#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) -#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) -#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) -#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) -#define U300_SYSCON_RSR_EH_RESET_EN (0x0008) -#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) -#define U300_SYSCON_RSR_UART_RESET_EN (0x0002) -#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) -/* Reset lines for FAST devices 16bit (R/W) */ -#define U300_SYSCON_RFR (0x0018) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) -#endif -#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) -#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) -#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) -#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) -#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) -#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) -#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) -/* Reset lines for the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_RRR (0x001c) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) -#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) -#endif -#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) -#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) -#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) -#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) -#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) -#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) -#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) -#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) -#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) -#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) -#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) -/* Clock enable for SLOW peripherals 16bit (R/W) */ -#define U300_SYSCON_CESR (0x0020) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) -#endif -#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) -#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) -#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) -#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) -#define U300_SYSCON_CESR_EH_CLK_EN (0x0008) -#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) -#define U300_SYSCON_CESR_UART_CLK_EN (0x0002) -#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) -/* Clock enable for FAST peripherals 16bit (R/W) */ -#define U300_SYSCON_CEFR (0x0024) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) -#endif -#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) -#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) -#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) -#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) -#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) -#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) -#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) -#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) -#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) -/* Clock enable for the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_CERR (0x0028) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) -#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) -#endif -#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) -#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) -#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) -#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) -#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) -#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) -#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) -#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) -#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) -#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) -#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) -#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) -/* Single block clock enable 16bit (-/W) */ -#define U300_SYSCON_SBCER (0x002c) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) -#endif -#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) -#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) -#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) -#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) -#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) -#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) -#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) -#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) -#endif -#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) -#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) -#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) -#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) -#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) -#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) -#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) -#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) -#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) -#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) -#endif -#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) -#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) -#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) -#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) -#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) -#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) -#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) -#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) -#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) -#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) -#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) -#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) -/* Single block clock disable 16bit (-/W) */ -#define U300_SYSCON_SBCDR (0x0030) -/* Same values as above for SBCER */ -/* Clock force SLOW peripherals 16bit (R/W) */ -#define U300_SYSCON_CFSR (0x003c) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) -#endif -#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) -#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) -#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) -#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) -#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) -#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) -#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) -#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) -/* Clock force FAST peripherals 16bit (R/W) */ -#define U300_SYSCON_CFFR (0x40) -/* Values not defined. Define if you want to use them. */ -/* Clock force the rest of the peripherals 16bit (R/W) */ -#define U300_SYSCON_CFRR (0x44) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) -#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) -#endif -#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) -#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) -#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) -#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) -#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) -#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) -#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) -#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) -#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) -#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) -#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) -#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) -/* PLL208 Frequency Control 16bit (R/W) */ -#define U300_SYSCON_PFCR (0x48) -#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) -/* Power Management Control 16bit (R/W) */ -#define U300_SYSCON_PMCR (0x50) -#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) -#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) -/* - * All other clocking registers moved to clock.c! - */ -/* Reset Out 16bit (R/W) */ -#define U300_SYSCON_RCR (0x6c) -#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) -/* EMIF Slew Rate Control 16bit (R/W) */ -#define U300_SYSCON_SRCLR (0x70) -#define U300_SYSCON_SRCLR_MASK (0x03FF) -#define U300_SYSCON_SRCLR_VALUE (0x03FF) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) -#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) -/* EMIF Clock Control Register 16bit (R/W) */ -#define U300_SYSCON_ECCR (0x0078) -#define U300_SYSCON_ECCR_MASK (0x000F) -#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) -#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) -#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) -#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) -/* PAD MUX Control register 1 (LOW) 16bit (R/W) */ -#define U300_SYSCON_PMC1LR (0x007C) -#define U300_SYSCON_PMC1LR_MASK (0xFFFF) -#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000) -#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000) -#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000) -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000) -#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000) -#elif CONFIG_MACH_U300_BS365 -#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000) -#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000) -#endif -#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000) -#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000) -#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000) -#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000) -#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00) -#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000) -#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400) -#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800) -#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00) -#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300) -#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000) -#define U300_SYSCON_PMC1LR_ETM_APP (0x0100) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080) -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020) -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008) -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C) -#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003) -#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000) -#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001) -#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002) -#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003) -/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */ -#define U300_SYSCON_PMC1HR (0x007E) -#define U300_SYSCON_PMC1HR_MASK (0xFFFF) -#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000) -#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000) -#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000) -#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000) -#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800) -#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040) -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0) -#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030) -#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010) -#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020) -#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030) -#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C) -#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004) -#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008) -#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C) -#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003) -#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001) -#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003) -/* Step one for killing the applications system 16bit (-/W) */ -#define U300_SYSCON_KA1R (0x0080) -#define U300_SYSCON_KA1R_MASK (0xFFFF) -#define U300_SYSCON_KA1R_VALUE (0xFFFF) -/* Step two for killing the application system 16bit (-/W) */ -#define U300_SYSCON_KA2R (0x0084) -#define U300_SYSCON_KA2R_MASK (0xFFFF) -#define U300_SYSCON_KA2R_VALUE (0xFFFF) -/* MMC/MSPRO frequency divider register 0 16bit (R/W) */ -#define U300_SYSCON_MMF0R (0x90) -#define U300_SYSCON_MMF0R_MASK (0x00FF) -#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) -#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) -/* MMC/MSPRO frequency divider register 1 16bit (R/W) */ -#define U300_SYSCON_MMF1R (0x94) -#define U300_SYSCON_MMF1R_MASK (0x00FF) -#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) -#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) -/* AAIF control register 16 bit (R/W) */ -#define U300_SYSCON_AAIFCR (0x98) -#define U300_SYSCON_AAIFCR_MASK (0x0003) -#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003) -#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000) -#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001) -#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002) -#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003) -/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ -#define U300_SYSCON_MMCR (0x9C) -#define U300_SYSCON_MMCR_MASK (0x0003) -#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) -#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) -/* Pull up/down control (R/W) */ -#define U300_SYSCON_PUCR (0x104) -#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200) -#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100) -#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080) -#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040) -#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F) -/* Padmux 2 control */ -#define U300_SYSCON_PMC2R (0x100) -#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0) -#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040) -#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080) -#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0) -#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300) -#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100) -#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200) -#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300) -#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00) -#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400) -#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800) -#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00) -#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000) -#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000) -#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000) -#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000) -#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000) -#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000) -#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000) -#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000) -#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000) -/* TODO: More SYSCON registers missing */ -#define U300_SYSCON_PMC3R (0x10c) -#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000) -#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000) -#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000) -#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000) -/* TODO: Missing other configs */ -#define U300_SYSCON_PMC4R (0x168) -#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003) -#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C) -#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004) -#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008) -#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C) -#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030) -#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010) -#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020) -#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030) -#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300) -#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000) -#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100) -#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200) -/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ -#define U300_SYSCON_S0CCR (0x120) -#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) -#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ -#define U300_SYSCON_S1CCR (0x124) -#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) -#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ -#define U300_SYSCON_S2CCR (0x128) -#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) -#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) -#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) -#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) -#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) -#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) -#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) -#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) -#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) -#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) -#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) -#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) -#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) -#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) -#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) -/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */ -#define U300_SYSCON_MCR (0x12c) -#define U300_SYSCON_MCR_FIELD_MASK (0x00FF) -#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0) -#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040) -#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0) -#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030) -#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010) -#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020) -#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030) -#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008) -#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C) -#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002) -#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001) -/* SC_PLL_IRQ_CONTROL 16bit (R/W) */ -#define U300_SYSCON_PICR (0x0130) -#define U300_SYSCON_PICR_MASK (0x00FF) -#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) -#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) -#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) -#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) -#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) -#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) -#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) -#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) -/* SC_PLL_IRQ_STATUS 16 bit (R/-) */ -#define U300_SYSCON_PISR (0x0134) -#define U300_SYSCON_PISR_MASK (0x000F) -#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) -#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) -#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) -#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) -/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ -#define U300_SYSCON_PICLR (0x0138) -#define U300_SYSCON_PICLR_MASK (0x000F) -#define U300_SYSCON_PICLR_RWMASK (0x0000) -#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) -#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) -#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) -#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) -/* CAMIF_CONTROL 16 bit (-/W) */ -#define U300_SYSCON_CICR (0x013C) -#define U300_SYSCON_CICR_MASK (0x0FFF) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00) -#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0) -#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C) -#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003) -/* Clock activity observability register 0 */ -#define U300_SYSCON_C0OAR (0x140) -#define U300_SYSCON_C0OAR_MASK (0xFFFF) -#define U300_SYSCON_C0OAR_VALUE (0xFFFF) -#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) -#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) -#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) -#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) -#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) -#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) -#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) -#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) -#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) -#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) -#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) -#define U300_SYSCON_C0OAR_APEX_CLK (0x0010) -#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) -#define U300_SYSCON_C0OAR_AHB_CLK (0x0004) -#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) -#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) -/* Clock activity observability register 1 */ -#define U300_SYSCON_C1OAR (0x144) -#define U300_SYSCON_C1OAR_MASK (0x3FFE) -#define U300_SYSCON_C1OAR_VALUE (0x3FFE) -#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) -#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) -#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) -#define U300_SYSCON_C1OAR_MMC_CLK (0x0400) -#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) -#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) -#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) -#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) -#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) -#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) -#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) -#define U300_SYSCON_C1OAR_PPM_CLK (0x0004) -#define U300_SYSCON_C1OAR_DMA_CLK (0x0002) -/* Clock activity observability register 2 */ -#define U300_SYSCON_C2OAR (0x148) -#define U300_SYSCON_C2OAR_MASK (0x0FFF) -#define U300_SYSCON_C2OAR_VALUE (0x0FFF) -#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) -#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) -#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) -#define U300_SYSCON_C2OAR_VC_CLK (0x0100) -#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) -#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) -#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) -#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) -#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) -#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) -#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) -#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) - -/* Chip ID register 16bit (R/-) */ -#define U300_SYSCON_CIDR (0x400) -/* Video IRQ clear 16bit (R/W) */ -#define U300_SYSCON_VICR (0x404) -#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002) -#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001) -/* SMCR */ -#define U300_SYSCON_SMCR (0x4d0) -#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) -#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) -#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) -#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) -/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ -#define U300_SYSCON_CSDR (0x4f0) -#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) -/* PRINT_CONTROL Print Control 16bit (R/-) */ -#define U300_SYSCON_PCR (0x4f8) -#define U300_SYSCON_PCR_SERV_IND (0x0001) -/* BOOT_CONTROL 16bit (R/-) */ -#define U300_SYSCON_BCR (0x4fc) -#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) -#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) -#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) -#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) - - -/* CPU clock defines */ -/** - * CPU high frequency in MHz - */ -#define SYSCON_CPU_CLOCK_HIGH 208 -/** - * CPU medium frequency in MHz - */ -#define SYSCON_CPU_CLOCK_MEDIUM 52 -/** - * CPU low frequency in MHz - */ -#define SYSCON_CPU_CLOCK_LOW 13 - -/* EMIF clock defines */ -/** - * EMIF high frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_HIGH 104 -/** - * EMIF medium frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_MEDIUM 52 -/** - * EMIF low frequency in MHz - */ -#define SYSCON_EMIF_CLOCK_LOW 13 - -/* AHB clock defines */ -/** - * AHB high frequency in MHz - */ -#define SYSCON_AHB_CLOCK_HIGH 52 -/** - * AHB medium frequency in MHz - */ -#define SYSCON_AHB_CLOCK_MEDIUM 26 -/** - * AHB low frequency in MHz - */ -#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */ - -enum syscon_busmaster { - SYSCON_BM_DMAC, - SYSCON_BM_XGAM, - SYSCON_BM_VIDEO_ENC -}; - -/* Selectr a resistor or a set of resistors */ -enum syscon_pull_up_down { - SYSCON_PU_KEY_IN_EN, - SYSCON_PU_EMIF_1_8_BIT_EN, - SYSCON_PU_EMIF_1_16_BIT_EN, - SYSCON_PU_EMIF_1_NFIF_READY_EN, - SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN, -}; - -/* - * Note that this array must match the order of the array "clk_reg" - * in syscon.c - */ -enum syscon_clk { - SYSCON_CLKCONTROL_SLOW_BRIDGE, - SYSCON_CLKCONTROL_UART, - SYSCON_CLKCONTROL_BTR, - SYSCON_CLKCONTROL_EH, - SYSCON_CLKCONTROL_GPIO, - SYSCON_CLKCONTROL_KEYPAD, - SYSCON_CLKCONTROL_APP_TIMER, - SYSCON_CLKCONTROL_ACC_TIMER, - SYSCON_CLKCONTROL_FAST_BRIDGE, - SYSCON_CLKCONTROL_I2C0, - SYSCON_CLKCONTROL_I2C1, - SYSCON_CLKCONTROL_I2S0, - SYSCON_CLKCONTROL_I2S1, - SYSCON_CLKCONTROL_MMC, - SYSCON_CLKCONTROL_SPI, - SYSCON_CLKCONTROL_I2S0_CORE, - SYSCON_CLKCONTROL_I2S1_CORE, - SYSCON_CLKCONTROL_UART1, - SYSCON_CLKCONTROL_AAIF, - SYSCON_CLKCONTROL_AHB, - SYSCON_CLKCONTROL_APEX, - SYSCON_CLKCONTROL_CPU, - SYSCON_CLKCONTROL_DMA, - SYSCON_CLKCONTROL_EMIF, - SYSCON_CLKCONTROL_NAND_IF, - SYSCON_CLKCONTROL_VIDEO_ENC, - SYSCON_CLKCONTROL_XGAM, - SYSCON_CLKCONTROL_SEMI, - SYSCON_CLKCONTROL_AHB_SUBSYS, - SYSCON_CLKCONTROL_MSPRO -}; - -enum syscon_sysclk_mode { - SYSCON_SYSCLK_DISABLED, - SYSCON_SYSCLK_M_CLK, - SYSCON_SYSCLK_ACC_FSM, - SYSCON_SYSCLK_PLL60_48, - SYSCON_SYSCLK_PLL60_60, - SYSCON_SYSCLK_ACC_PLL208, - SYSCON_SYSCLK_APP_PLL13, - SYSCON_SYSCLK_APP_FSM, - SYSCON_SYSCLK_RTC, - SYSCON_SYSCLK_APP_PLL208 -}; - -enum syscon_sysclk_req { - SYSCON_SYSCLKREQ_DISABLED, - SYSCON_SYSCLKREQ_ACTIVE_LOW, - SYSCON_SYSCLKREQ_MONITOR -}; - -enum syscon_clk_mode { - SYSCON_CLKMODE_OFF, - SYSCON_CLKMODE_DEFAULT, - SYSCON_CLKMODE_LOW, - SYSCON_CLKMODE_MEDIUM, - SYSCON_CLKMODE_HIGH, - SYSCON_CLKMODE_PERMANENT, - SYSCON_CLKMODE_ON, -}; - -enum syscon_call_mode { - SYSCON_CLKCALL_NOWAIT, - SYSCON_CLKCALL_WAIT, -}; - -int syscon_dc_on(bool keep_power_on); -int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster, - bool active); -bool syscon_get_busmaster_active_state(void); -int syscon_set_sleep_mask(enum syscon_clk, - bool sleep_ctrl); -int syscon_config_sysclk(u32 sysclk, - enum syscon_sysclk_mode sysclkmode, - bool inverse, - u32 divisor, - enum syscon_sysclk_req sysclkreq); -bool syscon_can_turn_off_semi_clock(void); - -/* This function is restricted to core.c */ -int syscon_request_normal_power(bool req); - -/* This function is restricted to be used by platform_speed.c */ -int syscon_speed_request(enum syscon_call_mode wait_mode, - enum syscon_clk_mode req_clk_mode); -#endif /* __MACH_SYSCON_H */ diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h deleted file mode 100644 index 8daf13634ce..00000000000 --- a/arch/arm/mach-u300/include/mach/system.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/system.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * System shutdown and reset functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <mach/hardware.h> -#include <asm/io.h> -#include <asm/hardware/vic.h> -#include <asm/irq.h> - -/* Forward declare this function from the watchdog */ -void coh901327_watchdog_reset(void); - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static void arch_reset(char mode, const char *cmd) -{ - switch (mode) { - case 's': - case 'h': - printk(KERN_CRIT "RESET: shutting down/rebooting system\n"); - /* Disable interrupts */ - local_irq_disable(); -#ifdef CONFIG_COH901327_WATCHDOG - coh901327_watchdog_reset(); -#endif - break; - default: - /* Do nothing */ - break; - } - /* Wait for system do die/reset. */ - while (1); -} diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h deleted file mode 100644 index f233b72633f..00000000000 --- a/arch/arm/mach-u300/include/mach/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/timex.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Platform tick rate definition. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -/* This is for the APP OS GP1 (General Purpose 1) timer */ -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h deleted file mode 100644 index 8b85df4c8d8..00000000000 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/u300-regs.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Basic register address definitions in physical memory and - * some block definitions for core devices like the timer. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_REGS_H -#define __MACH_U300_REGS_H - -/* - * These are the large blocks of memory allocated for I/O. - * the defines are used for setting up the I/O memory mapping. - */ - -/* NAND Flash CS0 */ -#define U300_NAND_CS0_PHYS_BASE 0x80000000 - -/* NFIF */ -#define U300_NAND_IF_PHYS_BASE 0x9f800000 - -/* AHB Peripherals */ -#define U300_AHB_PER_PHYS_BASE 0xa0000000 -#define U300_AHB_PER_VIRT_BASE 0xff010000 - -/* FAST Peripherals */ -#define U300_FAST_PER_PHYS_BASE 0xc0000000 -#define U300_FAST_PER_VIRT_BASE 0xff020000 - -/* SLOW Peripherals */ -#define U300_SLOW_PER_PHYS_BASE 0xc0010000 -#define U300_SLOW_PER_VIRT_BASE 0xff000000 - -/* Boot ROM */ -#define U300_BOOTROM_PHYS_BASE 0xffff0000 -#define U300_BOOTROM_VIRT_BASE 0xffff0000 - -/* SEMI config base */ -#ifdef CONFIG_MACH_U300_BS335 -#define U300_SEMI_CONFIG_BASE 0x2FFE0000 -#else -#define U300_SEMI_CONFIG_BASE 0x30000000 -#endif - -/* - * All the following peripherals are specified at their PHYSICAL address, - * so if you need to access them (in the kernel), you MUST use the macros - * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST() - * etc. - */ - -/* - * AHB peripherals - */ - -/* AHB Peripherals Bridge Controller */ -#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) - -/* Vectored Interrupt Controller 0, servicing 32 interrupts */ -#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) -#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000) - -/* Vectored Interrupt Controller 1, servicing 32 interrupts */ -#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) -#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000) - -/* Memory Stick Pro (MSPRO) controller */ -#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) - -/* EMIF Configuration Area */ -#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) - - -/* - * FAST peripherals - */ - -/* FAST bridge control */ -#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) - -/* MMC/SD controller */ -#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) - -/* PCM I2S0 controller */ -#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) - -/* PCM I2S1 controller */ -#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) - -/* I2C0 controller */ -#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) - -/* I2C1 controller */ -#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) - -/* SPI controller */ -#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) - -#ifdef CONFIG_MACH_U300_BS335 -/* Fast UART1 on U335 only */ -#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) -#endif - -/* - * SLOW peripherals - */ - -/* SLOW bridge control */ -#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) - -/* SYSCON */ -#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) -#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000) - -/* Watchdog */ -#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) - -/* UART0 */ -#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) - -/* APP side special timer */ -#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) -#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000) - -/* Keypad */ -#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) - -/* GPIO */ -#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) - -/* RTC */ -#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) - -/* Bus tracer */ -#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) - -/* Event handler (hardware queue) */ -#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) - -/* Genric Timer */ -#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) - -/* PPM */ -#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) - - -/* - * REST peripherals - */ - -/* ISP (image signal processor) is only available in U335 */ -#ifdef CONFIG_MACH_U300_BS335 -#define U300_ISP_BASE (0xA0008000) -#endif - -/* DMA Controller base */ -#define U300_DMAC_BASE (0xC0020000) - -/* MSL Base */ -#define U300_MSL_BASE (0xc0022000) - -/* APEX Base */ -#define U300_APEX_BASE (0xc0030000) - -/* Video Encoder Base */ -#ifdef CONFIG_MACH_U300_BS335 -#define U300_VIDEOENC_BASE (0xc0080000) -#else -#define U300_VIDEOENC_BASE (0xc0040000) -#endif - -/* XGAM Base */ -#define U300_XGAM_BASE (0xd0000000) - -/* - * Virtual accessor macros for static devices - */ - - -#endif diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h deleted file mode 100644 index 29acb718acf..00000000000 --- a/arch/arm/mach-u300/include/mach/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define AMBA_UART_DR (*(volatile unsigned char *)0xc0013000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0xc001302C) -#define AMBA_UART_CR (*(volatile unsigned char *)0xc0013030) -#define AMBA_UART_FR (*(volatile unsigned char *)0xc0013018) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h deleted file mode 100644 index ec423b92b81..00000000000 --- a/arch/arm/mach-u300/include/mach/vmalloc.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/vmalloc.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Virtual memory allocations - * End must be above the I/O registers and on an even 2MiB boundary. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#define VMALLOC_END 0xfe800000UL diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c deleted file mode 100644 index de1ac9ad221..00000000000 --- a/arch/arm/mach-u300/mmc.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * - * arch/arm/mach-u300/mmc.c - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Johan Lundin <johan.lundin@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/mmc/host.h> -#include <linux/input.h> -#include <linux/workqueue.h> -#include <linux/delay.h> -#include <linux/regulator/consumer.h> -#include <linux/regulator/machine.h> -#include <linux/gpio.h> -#include <linux/amba/mmci.h> -#include <linux/slab.h> - -#include "mmc.h" -#include "padmux.h" - -struct mmci_card_event { - struct input_dev *mmc_input; - int mmc_inserted; - struct work_struct workq; - struct mmci_platform_data mmc0_plat_data; -}; - -static unsigned int mmc_status(struct device *dev) -{ - struct mmci_card_event *mmci_card = container_of( - dev->platform_data, - struct mmci_card_event, mmc0_plat_data); - - return mmci_card->mmc_inserted; -} - -static int mmci_callback(void *data) -{ - struct mmci_card_event *mmci_card = data; - - disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD); - schedule_work(&mmci_card->workq); - - return 0; -} - - -static ssize_t gpio_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct mmci_card_event *mmci_card = container_of( - dev->platform_data, - struct mmci_card_event, mmc0_plat_data); - - - return sprintf(buf, "%d\n", !mmci_card->mmc_inserted); -} - -static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL); - -static void _mmci_callback(struct work_struct *ws) -{ - - struct mmci_card_event *mmci_card = container_of( - ws, - struct mmci_card_event, workq); - - mdelay(20); - - mmci_card->mmc_inserted = !gpio_get_value(U300_GPIO_PIN_MMC_CD); - - input_report_switch(mmci_card->mmc_input, KEY_INSERT, - mmci_card->mmc_inserted); - input_sync(mmci_card->mmc_input); - - pr_debug("MMC/SD card was %s\n", - mmci_card->mmc_inserted ? "inserted" : "removed"); - - enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, mmci_card->mmc_inserted); -} - -int __devinit mmc_init(struct amba_device *adev) -{ - struct mmci_card_event *mmci_card; - struct device *mmcsd_device = &adev->dev; - struct pmx *pmx; - int ret = 0; - - mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL); - if (!mmci_card) - return -ENOMEM; - - /* - * Do not set ocr_mask or voltage translation function, - * we have a regulator we can control instead. - */ - /* Nominally 2.85V on our platform */ - mmci_card->mmc0_plat_data.f_max = 24000000; - mmci_card->mmc0_plat_data.status = mmc_status; - mmci_card->mmc0_plat_data.gpio_wp = -1; - mmci_card->mmc0_plat_data.gpio_cd = -1; - mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; - - mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; - - INIT_WORK(&mmci_card->workq, _mmci_callback); - - ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection"); - if (ret) { - printk(KERN_CRIT "Could not allocate MMC card detection " \ - "GPIO pin\n"); - goto out; - } - - ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD); - if (ret) { - printk(KERN_CRIT "Invalid GPIO pin requested\n"); - goto out; - } - - ret = sysfs_create_file(&mmcsd_device->kobj, - &dev_attr_mmc_inserted.attr); - if (ret) - goto out; - - mmci_card->mmc_input = input_allocate_device(); - if (!mmci_card->mmc_input) { - printk(KERN_CRIT "Could not allocate MMC input device\n"); - return -ENOMEM; - } - - mmci_card->mmc_input->name = "MMC insert notification"; - mmci_card->mmc_input->id.bustype = BUS_HOST; - mmci_card->mmc_input->id.vendor = 0; - mmci_card->mmc_input->id.product = 0; - mmci_card->mmc_input->id.version = 0x0100; - mmci_card->mmc_input->dev.parent = mmcsd_device; - input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT); - - /* - * Since this must always be compiled into the kernel, this input - * is never unregistered or free:ed. - */ - ret = input_register_device(mmci_card->mmc_input); - if (ret) { - input_free_device(mmci_card->mmc_input); - goto out; - } - - input_set_drvdata(mmci_card->mmc_input, mmci_card); - - /* - * Setup padmuxing for MMC. Since this must always be - * compiled into the kernel, pmx is never released. - */ - pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING); - - if (IS_ERR(pmx)) - pr_warning("Could not get padmux handle\n"); - else { - ret = pmx_activate(mmcsd_device, pmx); - if (IS_ERR_VALUE(ret)) - pr_warning("Could not activate padmuxing\n"); - } - - ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback, - mmci_card); - - schedule_work(&mmci_card->workq); - - printk(KERN_INFO "Registered MMC insert/remove notification\n"); -out: - return ret; -} diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h deleted file mode 100644 index 92b85125abb..00000000000 --- a/arch/arm/mach-u300/mmc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * - * arch/arm/mach-u300/mmc.h - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - */ -#ifndef MMC_H -#define MMC_H - -#include <linux/amba/bus.h> - -int __devinit mmc_init(struct amba_device *adev); - -#endif diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c deleted file mode 100644 index 4c93c6cefd3..00000000000 --- a/arch/arm/mach-u300/padmux.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * - * arch/arm/mach-u300/padmux.c - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 PADMUX functions - * Author: Martin Persson <martin.persson@stericsson.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/mutex.h> -#include <linux/string.h> -#include <linux/bug.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <mach/u300-regs.h> -#include <mach/syscon.h> -#include "padmux.h" - -static DEFINE_MUTEX(pmx_mutex); - -const u32 pmx_registers[] = { - (U300_SYSCON_VBASE + U300_SYSCON_PMC1LR), - (U300_SYSCON_VBASE + U300_SYSCON_PMC1HR), - (U300_SYSCON_VBASE + U300_SYSCON_PMC2R), - (U300_SYSCON_VBASE + U300_SYSCON_PMC3R), - (U300_SYSCON_VBASE + U300_SYSCON_PMC4R) -}; - -/* High level functionality */ - -/* Lazy dog: - * onmask = { - * {"PMC1LR" mask, "PMC1LR" value}, - * {"PMC1HR" mask, "PMC1HR" value}, - * {"PMC2R" mask, "PMC2R" value}, - * {"PMC3R" mask, "PMC3R" value}, - * {"PMC4R" mask, "PMC4R" value} - * } - */ -static struct pmx mmc_setting = { - .setting = U300_APP_PMX_MMC_SETTING, - .default_on = false, - .activated = false, - .name = "MMC", - .onmask = { - {U300_SYSCON_PMC1LR_MMCSD_MASK, - U300_SYSCON_PMC1LR_MMCSD_MMCSD}, - {0, 0}, - {0, 0}, - {0, 0}, - {U300_SYSCON_PMC4R_APP_MISC_12_MASK, - U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO} - }, -}; - -static struct pmx spi_setting = { - .setting = U300_APP_PMX_SPI_SETTING, - .default_on = false, - .activated = false, - .name = "SPI", - .onmask = {{0, 0}, - {U300_SYSCON_PMC1HR_APP_SPI_2_MASK | - U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK | - U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK, - U300_SYSCON_PMC1HR_APP_SPI_2_SPI | - U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI | - U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI}, - {0, 0}, - {0, 0}, - {0, 0} - }, -}; - -/* Available padmux settings */ -static struct pmx *pmx_settings[] = { - &mmc_setting, - &spi_setting, -}; - -static void update_registers(struct pmx *pmx, bool activate) -{ - u16 regval, val, mask; - int i; - - for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) { - if (activate) - val = pmx->onmask[i].val; - else - val = 0; - - mask = pmx->onmask[i].mask; - if (mask != 0) { - regval = readw(pmx_registers[i]); - regval &= ~mask; - regval |= val; - writew(regval, pmx_registers[i]); - } - } -} - -struct pmx *pmx_get(struct device *dev, enum pmx_settings setting) -{ - int i; - struct pmx *pmx = ERR_PTR(-ENOENT); - - if (dev == NULL) - return ERR_PTR(-EINVAL); - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (setting == pmx_settings[i]->setting) { - - if (pmx_settings[i]->dev != NULL) { - WARN(1, "padmux: required setting " - "in use by another consumer\n"); - } else { - pmx = pmx_settings[i]; - pmx->dev = dev; - dev_dbg(dev, "padmux: setting nr %d is now " - "bound to %s and ready to use\n", - setting, dev_name(dev)); - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return pmx; -} -EXPORT_SYMBOL(pmx_get); - -int pmx_put(struct device *dev, struct pmx *pmx) -{ - int i; - int ret = -ENOENT; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx->setting == pmx_settings[i]->setting) { - - if (dev != pmx->dev) { - WARN(1, "padmux: cannot release handle as " - "it is bound to another consumer\n"); - ret = -EINVAL; - break; - } else { - pmx_settings[i]->dev = NULL; - ret = 0; - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return ret; -} -EXPORT_SYMBOL(pmx_put); - -int pmx_activate(struct device *dev, struct pmx *pmx) -{ - int i, j, ret; - ret = 0; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - - /* Make sure the required bits are not used */ - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx) - continue; - - for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) { - - if (pmx_settings[i]->onmask[j].mask & pmx-> - onmask[j].mask) { - /* More than one entry on the same bits */ - WARN(1, "padmux: cannot activate " - "setting. Bit conflict with " - "an active setting\n"); - - ret = -EUSERS; - goto exit; - } - } - } - update_registers(pmx, true); - pmx->activated = true; - dev_dbg(dev, "padmux: setting nr %d is activated\n", - pmx->setting); - -exit: - mutex_unlock(&pmx_mutex); - return ret; -} -EXPORT_SYMBOL(pmx_activate); - -int pmx_deactivate(struct device *dev, struct pmx *pmx) -{ - int i; - int ret = -ENOENT; - - if (pmx == NULL || dev == NULL) - return -EINVAL; - - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (pmx_settings[i]->dev == NULL) - continue; - - if (pmx->setting == pmx_settings[i]->setting) { - - if (dev != pmx->dev) { - WARN(1, "padmux: cannot deactivate " - "pmx setting as it was activated " - "by another consumer\n"); - - ret = -EBUSY; - continue; - } else { - update_registers(pmx, false); - pmx_settings[i]->dev = NULL; - pmx->activated = false; - ret = 0; - dev_dbg(dev, "padmux: setting nr %d is deactivated", - pmx->setting); - break; - } - } - } - mutex_unlock(&pmx_mutex); - - return ret; -} -EXPORT_SYMBOL(pmx_deactivate); - -/* - * For internal use only. If it is to be exported, - * it should be reentrant. Notice that pmx_activate - * (i.e. runtime settings) always override default settings. - */ -static int pmx_set_default(void) -{ - /* Used to identify several entries on the same bits */ - u16 modbits[ARRAY_SIZE(pmx_registers)]; - - int i, j; - - memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16)); - - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - - if (!pmx_settings[i]->default_on) - continue; - - for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) { - - /* Make sure there is only one entry on the same bits */ - if (modbits[j] & pmx_settings[i]->onmask[j].mask) { - BUG(); - return -EUSERS; - } - modbits[j] |= pmx_settings[i]->onmask[j].mask; - } - update_registers(pmx_settings[i], true); - } - return 0; -} - -#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) -static int pmx_show(struct seq_file *s, void *data) -{ - int i; - seq_printf(s, "-------------------------------------------------\n"); - seq_printf(s, "SETTING BOUND TO DEVICE STATE\n"); - seq_printf(s, "-------------------------------------------------\n"); - mutex_lock(&pmx_mutex); - for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) { - /* Format pmx and device name nicely */ - char cdp[33]; - int chars; - - chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name); - while (chars < 16) { - cdp[chars] = ' '; - chars++; - } - chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ? - dev_name(pmx_settings[i]->dev) : "N/A"); - while (chars < 16) { - cdp[chars+16] = ' '; - chars++; - } - cdp[32] = '\0'; - - seq_printf(s, - "%s\t%s\n", - &cdp[0], - pmx_settings[i]->activated ? - "ACTIVATED" : "DEACTIVATED" - ); - - } - mutex_unlock(&pmx_mutex); - return 0; -} - -static int pmx_open(struct inode *inode, struct file *file) -{ - return single_open(file, pmx_show, NULL); -} - -static const struct file_operations pmx_operations = { - .owner = THIS_MODULE, - .open = pmx_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init init_pmx_read_debugfs(void) -{ - /* Expose a simple debugfs interface to view pmx settings */ - (void) debugfs_create_file("padmux", S_IFREG | S_IRUGO, - NULL, NULL, - &pmx_operations); - return 0; -} - -/* - * This needs to come in after the core_initcall(), - * because debugfs is not available until - * the subsystems come up. - */ -module_init(init_pmx_read_debugfs); -#endif - -static int __init pmx_init(void) -{ - int ret; - - ret = pmx_set_default(); - - if (IS_ERR_VALUE(ret)) - pr_crit("padmux: default settings could not be set\n"); - - return 0; -} - -/* Should be initialized before consumers */ -core_initcall(pmx_init); diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h deleted file mode 100644 index 6e8b8606409..00000000000 --- a/arch/arm/mach-u300/padmux.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * - * arch/arm/mach-u300/padmux.h - * - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 PADMUX API - * Author: Martin Persson <martin.persson@stericsson.com> - */ - -#ifndef __MACH_U300_PADMUX_H -#define __MACH_U300_PADMUX_H - -enum pmx_settings { - U300_APP_PMX_MMC_SETTING, - U300_APP_PMX_SPI_SETTING -}; - -struct pmx_onmask { - u16 mask; /* Mask bits */ - u16 val; /* Value when active */ -}; - -struct pmx { - struct device *dev; - enum pmx_settings setting; - char *name; - bool activated; - bool default_on; - struct pmx_onmask onmask[]; -}; - -struct pmx *pmx_get(struct device *dev, enum pmx_settings setting); -int pmx_put(struct device *dev, struct pmx *pmx); -int pmx_activate(struct device *dev, struct pmx *pmx); -int pmx_deactivate(struct device *dev, struct pmx *pmx); - -#endif diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c index 9c53f01c62e..0493a845b6b 100644 --- a/arch/arm/mach-u300/regulator.c +++ b/arch/arm/mach-u300/regulator.c @@ -10,11 +10,18 @@ #include <linux/device.h> #include <linux/signal.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/machine.h> #include <linux/regulator/consumer.h> -/* Those are just for writing in syscon */ -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/syscon.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +/* Power Management Control 16bit (R/W) */ +#define U300_SYSCON_PMCR (0x50) +#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) +#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) /* * Regulators that power the board and chip and which are @@ -47,13 +54,28 @@ void u300_pm_poweroff(void) /* * Hog the regulators needed to power up the board. */ -static int __init u300_init_boardpower(void) +static int __init __u300_init_boardpower(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; + struct device_node *syscon_np; + struct regmap *regmap; int err; - u32 val; pr_info("U300: setting up board power\n"); - main_power_15 = regulator_get(NULL, "vana15"); + + syscon_np = of_parse_phandle(np, "syscon", 0); + if (!syscon_np) { + pr_crit("U300: no syscon node\n"); + return -ENODEV; + } + regmap = syscon_node_to_regmap(syscon_np); + if (IS_ERR(regmap)) { + pr_crit("U300: could not locate syscon regmap\n"); + return PTR_ERR(regmap); + } + + main_power_15 = regulator_get(&pdev->dev, "vana15"); + if (IS_ERR(main_power_15)) { pr_err("could not get vana15"); return PTR_ERR(main_power_15); @@ -72,9 +94,8 @@ static int __init u300_init_boardpower(void) * the rest of the U300 power management is implemented. */ pr_info("U300: disable system controller pull-up\n"); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); - val &= ~U300_SYSCON_PMCR_DCON_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); + regmap_update_bits(regmap, U300_SYSCON_PMCR, + U300_SYSCON_PMCR_DCON_ENABLE, 0); /* Register globally exported PM poweroff hook */ pm_power_off = u300_pm_poweroff; @@ -82,7 +103,31 @@ static int __init u300_init_boardpower(void) return 0; } +static int __init s365_board_probe(struct platform_device *pdev) +{ + return __u300_init_boardpower(pdev); +} + +static const struct of_device_id s365_board_match[] = { + { .compatible = "stericsson,s365" }, + {}, +}; + +static struct platform_driver s365_board_driver = { + .driver = { + .name = "s365-board", + .owner = THIS_MODULE, + .of_match_table = s365_board_match, + }, +}; + /* * So at module init time we hog the regulator! */ -module_init(u300_init_boardpower); +static int __init u300_init_boardpower(void) +{ + return platform_driver_probe(&s365_board_driver, + s365_board_probe); +} + +device_initcall(u300_init_boardpower); diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c deleted file mode 100644 index 00869def542..00000000000 --- a/arch/arm/mach-u300/spi.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-u300/spi.c - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/spi/spi.h> -#include <linux/amba/pl022.h> -#include <linux/err.h> -#include "padmux.h" - -/* - * The following is for the actual devices on the SSP/SPI bus - */ -#ifdef CONFIG_MACH_U300_SPIDUMMY -static void select_dummy_chip(u32 chipselect) -{ - pr_debug("CORE: %s called with CS=0x%x (%s)\n", - __func__, - chipselect, - chipselect ? "unselect chip" : "select chip"); - /* - * Here you would write the chip select value to the GPIO pins if - * this was a real chip (but this is a loopback dummy). - */ -} - -struct pl022_config_chip dummy_chip_info = { - /* - * available POLLING_TRANSFER and INTERRUPT_TRANSFER, - * DMA_TRANSFER does not work - */ - .com_mode = INTERRUPT_TRANSFER, - .iface = SSP_INTERFACE_MOTOROLA_SPI, - /* We can only act as master but SSP_SLAVE is possible in theory */ - .hierarchy = SSP_MASTER, - /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ - .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .ctrl_len = SSP_BITS_12, - .wait_state = SSP_MWIRE_WAIT_ZERO, - .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, - /* - * This is where you insert a call to a function to enable CS - * (usually GPIO) for a certain chip. - */ - .cs_control = select_dummy_chip, -}; -#endif - -static struct spi_board_info u300_spi_devices[] = { -#ifdef CONFIG_MACH_U300_SPIDUMMY - { - /* A dummy chip used for loopback tests */ - .modalias = "spi-dummy", - /* Really dummy, pass in additional chip config here */ - .platform_data = NULL, - /* This defines how the controller shall handle the device */ - .controller_data = &dummy_chip_info, - /* .irq - no external IRQ routed from this device */ - .max_speed_hz = 1000000, - .bus_num = 0, /* Only one bus on this chip */ - .chip_select = 0, - /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = SPI_MODE_1 | SPI_LOOP, - }, -#endif -}; - -static struct pl022_ssp_controller ssp_platform_data = { - /* If you have several SPI buses this varies, we have only bus 0 */ - .bus_id = 0, - /* Set this to 1 when we think we got DMA working */ - .enable_dma = 0, - /* - * On the APP CPU GPIO 4, 5 and 6 are connected as generic - * chip selects for SPI. (Same on U330, U335 and U365.) - * TODO: make sure the GPIO driver can select these properly - * and do padmuxing accordingly too. - */ - .num_chipselect = 3, -}; - - -void __init u300_spi_init(struct amba_device *adev) -{ - struct pmx *pmx; - - adev->dev.platform_data = &ssp_platform_data; - /* - * Setup padmuxing for SPI. Since this must always be - * compiled into the kernel, pmx is never released. - */ - pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING); - - if (IS_ERR(pmx)) - dev_warn(&adev->dev, "Could not get padmux handle\n"); - else { - int ret; - - ret = pmx_activate(&adev->dev, pmx); - if (IS_ERR_VALUE(ret)) - dev_warn(&adev->dev, "Could not activate padmuxing\n"); - } - -} -void __init u300_spi_register_board_devices(void) -{ - /* Register any SPI devices */ - spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices)); -} diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h deleted file mode 100644 index bd3d867e240..00000000000 --- a/arch/arm/mach-u300/spi.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-u300/spi.h - * - * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#ifndef SPI_H -#define SPI_H -#include <linux/amba/bus.h> - -#ifdef CONFIG_SPI_PL022 -void __init u300_spi_init(struct amba_device *adev); -void __init u300_spi_register_board_devices(void); -#else -/* Compile out SPI support if PL022 is not selected */ -static inline void __init u300_spi_init(struct amba_device *adev) -{ -} -static inline void __init u300_spi_register_board_devices(void) -{ -} -#endif - -#endif diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c deleted file mode 100644 index 3fc4472719b..00000000000 --- a/arch/arm/mach-u300/timer.c +++ /dev/null @@ -1,443 +0,0 @@ -/* - * - * arch/arm/mach-u300/timer.c - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Timer COH 901 328, runs the OS timer interrupt. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/types.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <mach/hardware.h> - -/* Generic stuff */ -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> - -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define APPTIMER_MIN_RANGE 4 - -/* - * APP side special timer registers - * This timer contains four timers which can fire an interrupt each. - * OS (operating system) timer @ 32768 Hz - * DD (device driver) timer @ 1 kHz - * GP1 (general purpose 1) timer @ 1MHz - * GP2 (general purpose 2) timer @ 1MHz - */ - -/* Reset OS Timer 32bit (-/W) */ -#define U300_TIMER_APP_ROST (0x0000) -#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000) -/* Enable OS Timer 32bit (-/W) */ -#define U300_TIMER_APP_EOST (0x0004) -#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000) -/* Disable OS Timer 32bit (-/W) */ -#define U300_TIMER_APP_DOST (0x0008) -#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000) -/* OS Timer Mode Register 32bit (-/W) */ -#define U300_TIMER_APP_SOSTM (0x000c) -#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001) -/* OS Timer Status Register 32bit (R/-) */ -#define U300_TIMER_APP_OSTS (0x0010) -#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F) -#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001) -#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002) -#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010) -#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020) -#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020) -#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040) -#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080) -/* OS Timer Current Count Register 32bit (R/-) */ -#define U300_TIMER_APP_OSTCC (0x0014) -/* OS Timer Terminal Count Register 32bit (R/W) */ -#define U300_TIMER_APP_OSTTC (0x0018) -/* OS Timer Interrupt Enable Register 32bit (-/W) */ -#define U300_TIMER_APP_OSTIE (0x001c) -#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000) -#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001) -/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */ -#define U300_TIMER_APP_OSTIA (0x0020) -#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080) - -/* Reset DD Timer 32bit (-/W) */ -#define U300_TIMER_APP_RDDT (0x0040) -#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000) -/* Enable DD Timer 32bit (-/W) */ -#define U300_TIMER_APP_EDDT (0x0044) -#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000) -/* Disable DD Timer 32bit (-/W) */ -#define U300_TIMER_APP_DDDT (0x0048) -#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000) -/* DD Timer Mode Register 32bit (-/W) */ -#define U300_TIMER_APP_SDDTM (0x004c) -#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001) -/* DD Timer Status Register 32bit (R/-) */ -#define U300_TIMER_APP_DDTS (0x0050) -#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F) -#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001) -#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002) -#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010) -#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020) -#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020) -#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040) -#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080) -/* DD Timer Current Count Register 32bit (R/-) */ -#define U300_TIMER_APP_DDTCC (0x0054) -/* DD Timer Terminal Count Register 32bit (R/W) */ -#define U300_TIMER_APP_DDTTC (0x0058) -/* DD Timer Interrupt Enable Register 32bit (-/W) */ -#define U300_TIMER_APP_DDTIE (0x005c) -#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000) -#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001) -/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */ -#define U300_TIMER_APP_DDTIA (0x0060) -#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080) - -/* Reset GP1 Timer 32bit (-/W) */ -#define U300_TIMER_APP_RGPT1 (0x0080) -#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000) -/* Enable GP1 Timer 32bit (-/W) */ -#define U300_TIMER_APP_EGPT1 (0x0084) -#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000) -/* Disable GP1 Timer 32bit (-/W) */ -#define U300_TIMER_APP_DGPT1 (0x0088) -#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000) -/* GP1 Timer Mode Register 32bit (-/W) */ -#define U300_TIMER_APP_SGPT1M (0x008c) -#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001) -/* GP1 Timer Status Register 32bit (R/-) */ -#define U300_TIMER_APP_GPT1S (0x0090) -#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F) -#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001) -#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002) -#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010) -#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020) -#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020) -#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040) -#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080) -/* GP1 Timer Current Count Register 32bit (R/-) */ -#define U300_TIMER_APP_GPT1CC (0x0094) -/* GP1 Timer Terminal Count Register 32bit (R/W) */ -#define U300_TIMER_APP_GPT1TC (0x0098) -/* GP1 Timer Interrupt Enable Register 32bit (-/W) */ -#define U300_TIMER_APP_GPT1IE (0x009c) -#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000) -#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001) -/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */ -#define U300_TIMER_APP_GPT1IA (0x00a0) -#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080) - -/* Reset GP2 Timer 32bit (-/W) */ -#define U300_TIMER_APP_RGPT2 (0x00c0) -#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000) -/* Enable GP2 Timer 32bit (-/W) */ -#define U300_TIMER_APP_EGPT2 (0x00c4) -#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000) -/* Disable GP2 Timer 32bit (-/W) */ -#define U300_TIMER_APP_DGPT2 (0x00c8) -#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000) -/* GP2 Timer Mode Register 32bit (-/W) */ -#define U300_TIMER_APP_SGPT2M (0x00cc) -#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001) -/* GP2 Timer Status Register 32bit (R/-) */ -#define U300_TIMER_APP_GPT2S (0x00d0) -#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F) -#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001) -#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002) -#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010) -#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020) -#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020) -#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040) -#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080) -/* GP2 Timer Current Count Register 32bit (R/-) */ -#define U300_TIMER_APP_GPT2CC (0x00d4) -/* GP2 Timer Terminal Count Register 32bit (R/W) */ -#define U300_TIMER_APP_GPT2TC (0x00d8) -/* GP2 Timer Interrupt Enable Register 32bit (-/W) */ -#define U300_TIMER_APP_GPT2IE (0x00dc) -#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000) -#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001) -/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */ -#define U300_TIMER_APP_GPT2IA (0x00e0) -#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080) - -/* Clock request control register - all four timers */ -#define U300_TIMER_APP_CRC (0x100) -#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001) - -#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) -#define US_PER_TICK ((1000000 + (HZ/2)) / HZ) - -/* - * The u300_set_mode() function is always called first, if we - * have oneshot timer active, the oneshot scheduling function - * u300_set_next_event() is called immediately after. - */ -static void u300_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* Disable interrupts on GPT1 */ - writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); - /* Disable GP1 while we're reprogramming it. */ - writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); - /* - * Set the periodic mode to a certain number of ticks per - * jiffy. - */ - writel(TICKS_PER_JIFFY, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); - /* - * Set continuous mode, so the timer keeps triggering - * interrupts. - */ - writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); - /* Enable timer interrupts */ - writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); - /* Then enable the OS timer again */ - writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* Just break; here? */ - /* - * The actual event will be programmed by the next event hook, - * so we just set a dummy value somewhere at the end of the - * universe here. - */ - /* Disable interrupts on GPT1 */ - writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); - /* Disable GP1 while we're reprogramming it. */ - writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); - /* - * Expire far in the future, u300_set_next_event() will be - * called soon... - */ - writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); - /* We run one shot per tick here! */ - writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); - /* Enable interrupts for this timer */ - writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); - /* Enable timer */ - writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - /* Disable interrupts on GP1 */ - writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); - /* Disable GP1 */ - writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); - break; - case CLOCK_EVT_MODE_RESUME: - /* Ignore this call */ - break; - } -} - -/* - * The app timer in one shot mode obviously has to be reprogrammed - * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace - * the interrupt disable + timer disable commands with a reset command, - * it will fail miserably. Apparently (and I found this the hard way) - * the timer is very sensitive to the instruction order, though you don't - * get that impression from the data sheet. - */ -static int u300_set_next_event(unsigned long cycles, - struct clock_event_device *evt) - -{ - /* Disable interrupts on GPT1 */ - writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); - /* Disable GP1 while we're reprogramming it. */ - writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1); - /* Reset the General Purpose timer 1. */ - writel(U300_TIMER_APP_RGPT1_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); - /* IRQ in n * cycles */ - writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC); - /* - * We run one shot per tick here! (This is necessary to reconfigure, - * the timer will tilt if you don't!) - */ - writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M); - /* Enable timer interrupts */ - writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE); - /* Then enable the OS timer again */ - writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1); - return 0; -} - - -/* Use general purpose timer 1 as clock event */ -static struct clock_event_device clockevent_u300_1mhz = { - .name = "GPT1", - .rating = 300, /* Reasonably fast and accurate clock event */ - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = u300_set_next_event, - .set_mode = u300_set_mode, -}; - -/* Clock event timer interrupt handler */ -static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_u300_1mhz; - /* ACK/Clear timer IRQ for the APP GPT1 Timer */ - writel(U300_TIMER_APP_GPT1IA_IRQ_ACK, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA); - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static struct irqaction u300_timer_irq = { - .name = "U300 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = u300_timer_interrupt, -}; - -/* Use general purpose timer 2 as clock source */ -static cycle_t u300_get_cycles(struct clocksource *cs) -{ - return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); -} - -static struct clocksource clocksource_u300_1mhz = { - .name = "GPT2", - .rating = 300, /* Reasonably fast and accurate clock source */ - .read = u300_get_cycles, - .mask = CLOCKSOURCE_MASK(32), /* 32 bits */ - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/* - * Override the global weak sched_clock symbol with this - * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. We accept that - * this wraps around for now, since it is just a relative time - * stamp. (Inspired by OMAP implementation.) - */ -unsigned long long notrace sched_clock(void) -{ - return clocksource_cyc2ns(clocksource_u300_1mhz.read( - &clocksource_u300_1mhz), - clocksource_u300_1mhz.mult, - clocksource_u300_1mhz.shift); -} - - -/* - * This sets up the system timers, clock source and clock event. - */ -static void __init u300_timer_init(void) -{ - struct clk *clk; - unsigned long rate; - - /* Clock the interrupt controller */ - clk = clk_get_sys("apptimer", NULL); - BUG_ON(IS_ERR(clk)); - clk_enable(clk); - rate = clk_get_rate(clk); - - /* - * Disable the "OS" and "DD" timers - these are designed for Symbian! - * Example usage in cnh1601578 cpu subsystem pd_timer_app.c - */ - writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC); - writel(U300_TIMER_APP_ROST_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST); - writel(U300_TIMER_APP_DOST_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST); - writel(U300_TIMER_APP_RDDT_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT); - writel(U300_TIMER_APP_DDDT_TIMER_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT); - - /* Reset the General Purpose timer 1. */ - writel(U300_TIMER_APP_RGPT1_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1); - - /* Set up the IRQ handler */ - setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq); - - /* Reset the General Purpose timer 2 */ - writel(U300_TIMER_APP_RGPT2_TIMER_RESET, - U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2); - /* Set this timer to run around forever */ - writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC); - /* Set continuous mode so it wraps around */ - writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS, - U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M); - /* Disable timer interrupts */ - writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE); - /* Then enable the GP2 timer to use as a free running us counter */ - writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE, - U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2); - - clocksource_calc_mult_shift(&clocksource_u300_1mhz, - rate, APPTIMER_MIN_RANGE); - if (clocksource_register(&clocksource_u300_1mhz)) - printk(KERN_ERR "timer: failed to initialize clock " - "source %s\n", clocksource_u300_1mhz.name); - - clockevents_calc_mult_shift(&clockevent_u300_1mhz, - rate, APPTIMER_MIN_RANGE); - /* 32bit counter, so 32bits delta is max */ - clockevent_u300_1mhz.max_delta_ns = - clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz); - /* This timer is slow enough to set for 1 cycle == 1 MHz */ - clockevent_u300_1mhz.min_delta_ns = - clockevent_delta2ns(1, &clockevent_u300_1mhz); - clockevent_u300_1mhz.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_u300_1mhz); - /* - * TODO: init and register the rest of the timers too, they can be - * used by hrtimers! - */ -} - -/* - * Very simple system timer that only register the clock event and - * clock source. - */ -struct sys_timer u300_timer = { - .init = u300_timer_init, -}; diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c deleted file mode 100644 index 07c35a84642..00000000000 --- a/arch/arm/mach-u300/u300.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * - * arch/arm/mach-u300/u300.c - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Platform machine definition. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/memblock.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/memory.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -static void __init u300_reserve(void) -{ - /* - * U300 - This platform family can share physical memory - * between two ARM cpus, one running Linux and the other - * running another OS. - */ -#ifdef CONFIG_MACH_U300_SINGLE_RAM -#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \ - CONFIG_MACH_U300_2MB_ALIGNMENT_FIX - memblock_reserve(PHYS_OFFSET, 0x00100000); -#endif -#endif -} - -static void __init u300_init_machine(void) -{ - u300_init_devices(); -} - -#ifdef CONFIG_MACH_U300_BS2X -#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS330 -#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS335 -#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS365 -#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board" -#endif - -MACHINE_START(U300, MACH_U300_STRING) - /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .boot_params = BOOT_PARAMS_OFFSET, - .map_io = u300_map_io, - .reserve = u300_reserve, - .init_irq = u300_init_irq, - .timer = &u300_timer, - .init_machine = u300_init_machine, -MACHINE_END |