diff options
Diffstat (limited to 'arch/arm/mach-mx3')
33 files changed, 0 insertions, 8960 deletions
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig deleted file mode 100644 index 5000ac1f93e..00000000000 --- a/arch/arm/mach-mx3/Kconfig +++ /dev/null @@ -1,190 +0,0 @@ -if ARCH_MX3 - -config ARCH_MX31 - select ARCH_HAS_RNGA - select ARCH_MXC_AUDMUX_V2 - bool - -config ARCH_MX35 - bool - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select HAVE_EPIT - -comment "MX3 platforms:" - -config MACH_MX31ADS - bool "Support MX31ADS platforms" - select ARCH_MX31 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - default y - help - Include support for MX31ADS platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31ADS_WM1133_EV1 - bool "Support Wolfson Microelectronics 1133-EV1 module" - depends on MACH_MX31ADS - depends on MFD_WM8350_I2C - depends on REGULATOR_WM8350 - select MFD_WM8350_CONFIG_MODE_0 - select MFD_WM8352_CONFIG_MODE_0 - help - Include support for the Wolfson Microelectronics 1133-EV1 PMU - and audio module for the MX31ADS platform. - -config MACH_PCM037 - bool "Support Phytec pcm037 (i.MX31) platforms" - select ARCH_MX31 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_NAND - select MXC_ULPI if USB_ULPI - help - Include support for Phytec pcm037 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_PCM037_EET - bool "Support pcm037 EET board extensions" - depends on MACH_PCM037 - select IMX_HAVE_PLATFORM_SPI_IMX - help - Add support for PCM037 EET baseboard extensions. If you are using the - OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel - command-line parameter. - -config MACH_MX31LITE - bool "Support MX31 LITEKIT (LogicPD)" - select ARCH_MX31 - select MXC_ULPI if USB_ULPI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX31 LITEKIT platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31_3DS - bool "Support MX31PDK (3DS)" - select ARCH_MX31 - select MXC_DEBUG_BOARD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX31PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31_3DS_MXC_NAND_USE_BBT - bool "Make the MXC NAND driver use the in flash Bad Block Table" - depends on MACH_MX31_3DS - depends on MTD_NAND_MXC - help - Enable this if you want that the MXC NAND driver uses the in flash - Bad Block Table to know what blocks are bad instead of scanning the - entire flash looking for bad block markers. - -config MACH_MX31MOBOARD - bool "Support mx31moboard platforms (EPFL Mobots group)" - select ARCH_MX31 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - help - Include support for mx31moboard platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31LILLY - bool "Support MX31 LILLY-1131 platforms (INCO startec)" - select ARCH_MX31 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - help - Include support for mx31 based LILLY1131 modules. This includes - specific configurations for the board and its peripherals. - -config MACH_QONG - bool "Support Dave/DENX QongEVB-LITE platform" - select ARCH_MX31 - select IMX_HAVE_PLATFORM_IMX_UART - help - Include support for Dave/DENX QongEVB-LITE platform. This includes - specific configurations for the board and its peripherals. - -config MACH_PCM043 - bool "Support Phytec pcm043 (i.MX35) platforms" - select ARCH_MX35 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_ESDHC - select MXC_ULPI if USB_ULPI - help - Include support for Phytec pcm043 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_ARMADILLO5X0 - bool "Support Atmark Armadillo-500 Development Base Board" - select ARCH_MX31 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_NAND - select MXC_ULPI if USB_ULPI - help - Include support for Atmark Armadillo-500 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_MX35_3DS - bool "Support MX35PDK platform" - select ARCH_MX35 - select MXC_DEBUG_BOARD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_ESDHC - default n - help - Include support for MX35PDK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_KZM_ARM11_01 - bool "Support KZM-ARM11-01(Kyoto Microcomputer)" - select ARCH_MX31 - select IMX_HAVE_PLATFORM_IMX_UART - help - Include support for KZM-ARM11-01. This includes specific - configurations for the board and its peripherals. - -config MACH_EUKREA_CPUIMX35 - bool "Support Eukrea CPUIMX35 Platform" - select ARCH_MX35 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_ESDHC - select MXC_ULPI if USB_ULPI - help - Include support for Eukrea CPUIMX35 platform. This includes - specific configurations for the board and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX35 - default MACH_EUKREA_MBIMXSD35_BASEBOARD - -config MACH_EUKREA_MBIMXSD35_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_IMX_SSI - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile deleted file mode 100644 index 8a182d0a3fc..00000000000 --- a/arch/arm/mach-mx3/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := mm.o devices.o cpu.o -CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS -CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS -obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o -obj-$(CONFIG_ARCH_MX35) += clock-imx35.o -obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o -obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o -obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o -obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o -obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o -obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o -CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS -obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \ - mx31moboard-marxbot.o mx31moboard-smartbot.o -obj-$(CONFIG_MACH_QONG) += mach-qong.o -obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o -obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o -obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd-baseboard.o diff --git a/arch/arm/mach-mx3/Makefile.boot b/arch/arm/mach-mx3/Makefile.boot deleted file mode 100644 index e1dd366f836..00000000000 --- a/arch/arm/mach-mx3/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y := 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c deleted file mode 100644 index 109e98f323e..00000000000 --- a/arch/arm/mach-mx3/clock-imx31.c +++ /dev/null @@ -1,630 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <asm/clkdev.h> -#include <asm/div64.h> - -#include <mach/clock.h> -#include <mach/hardware.h> -#include <mach/mx31.h> -#include <mach/common.h> - -#include "crm_regs.h" - -#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */ - -static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post) -{ - u32 min_pre, temp_pre, old_err, err; - - if (div >= 512) { - *pre = 8; - *post = 64; - } else if (div >= 64) { - min_pre = (div - 1) / 64 + 1; - old_err = 8; - for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) { - err = div % temp_pre; - if (err == 0) { - *pre = temp_pre; - break; - } - err = temp_pre - err; - if (err < old_err) { - old_err = err; - *pre = temp_pre; - } - } - *post = (div + *pre - 1) / *pre; - } else if (div <= 8) { - *pre = div; - *post = 1; - } else { - *pre = 1; - *post = div; - } -} - -static struct clk mcu_pll_clk; -static struct clk serial_pll_clk; -static struct clk ipg_clk; -static struct clk ckih_clk; - -static int cgr_enable(struct clk *clk) -{ - u32 reg; - - if (!clk->enable_reg) - return 0; - - reg = __raw_readl(clk->enable_reg); - reg |= 3 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - - return 0; -} - -static void cgr_disable(struct clk *clk) -{ - u32 reg; - - if (!clk->enable_reg) - return; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(3 << clk->enable_shift); - - /* special case for EMI clock */ - if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8) - reg |= (1 << clk->enable_shift); - - __raw_writel(reg, clk->enable_reg); -} - -static unsigned long pll_ref_get_rate(void) -{ - unsigned long ccmr; - unsigned int prcs; - - ccmr = __raw_readl(MXC_CCM_CCMR); - prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET; - if (prcs == 0x1) - return CKIL_CLK_FREQ * 1024; - else - return clk_get_rate(&ckih_clk); -} - -static unsigned long usb_pll_get_rate(struct clk *clk) -{ - unsigned long reg; - - reg = __raw_readl(MXC_CCM_UPCTL); - - return mxc_decode_pll(reg, pll_ref_get_rate()); -} - -static unsigned long serial_pll_get_rate(struct clk *clk) -{ - unsigned long reg; - - reg = __raw_readl(MXC_CCM_SRPCTL); - - return mxc_decode_pll(reg, pll_ref_get_rate()); -} - -static unsigned long mcu_pll_get_rate(struct clk *clk) -{ - unsigned long reg, ccmr; - - ccmr = __raw_readl(MXC_CCM_CCMR); - - if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS)) - return clk_get_rate(&ckih_clk); - - reg = __raw_readl(MXC_CCM_MPCTL); - - return mxc_decode_pll(reg, pll_ref_get_rate()); -} - -static int usb_pll_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(MXC_CCM_CCMR); - reg |= MXC_CCM_CCMR_UPE; - __raw_writel(reg, MXC_CCM_CCMR); - - /* No lock bit on MX31, so using max time from spec */ - udelay(80); - - return 0; -} - -static void usb_pll_disable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(MXC_CCM_CCMR); - reg &= ~MXC_CCM_CCMR_UPE; - __raw_writel(reg, MXC_CCM_CCMR); -} - -static int serial_pll_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(MXC_CCM_CCMR); - reg |= MXC_CCM_CCMR_SPE; - __raw_writel(reg, MXC_CCM_CCMR); - - /* No lock bit on MX31, so using max time from spec */ - udelay(80); - - return 0; -} - -static void serial_pll_disable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(MXC_CCM_CCMR); - reg &= ~MXC_CCM_CCMR_SPE; - __raw_writel(reg, MXC_CCM_CCMR); -} - -#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off) -#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off) -#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off) - -static unsigned long mcu_main_get_rate(struct clk *clk) -{ - u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0); - - if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL) - return clk_get_rate(&serial_pll_clk); - else - return clk_get_rate(&mcu_pll_clk); -} - -static unsigned long ahb_get_rate(struct clk *clk) -{ - unsigned long max_pdf; - - max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK, - MXC_CCM_PDR0_MAX_PODF_OFFSET); - return clk_get_rate(clk->parent) / (max_pdf + 1); -} - -static unsigned long ipg_get_rate(struct clk *clk) -{ - unsigned long ipg_pdf; - - ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK, - MXC_CCM_PDR0_IPG_PODF_OFFSET); - return clk_get_rate(clk->parent) / (ipg_pdf + 1); -} - -static unsigned long nfc_get_rate(struct clk *clk) -{ - unsigned long nfc_pdf; - - nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK, - MXC_CCM_PDR0_NFC_PODF_OFFSET); - return clk_get_rate(clk->parent) / (nfc_pdf + 1); -} - -static unsigned long hsp_get_rate(struct clk *clk) -{ - unsigned long hsp_pdf; - - hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK, - MXC_CCM_PDR0_HSP_PODF_OFFSET); - return clk_get_rate(clk->parent) / (hsp_pdf + 1); -} - -static unsigned long usb_get_rate(struct clk *clk) -{ - unsigned long usb_pdf, usb_prepdf; - - usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK, - MXC_CCM_PDR1_USB_PODF_OFFSET); - usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK, - MXC_CCM_PDR1_USB_PRDF_OFFSET); - return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1); -} - -static unsigned long csi_get_rate(struct clk *clk) -{ - u32 reg, pre, post; - - reg = __raw_readl(MXC_CCM_PDR0); - pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >> - MXC_CCM_PDR0_CSI_PRDF_OFFSET; - pre++; - post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >> - MXC_CCM_PDR0_CSI_PODF_OFFSET; - post++; - return clk_get_rate(clk->parent) / (pre * post); -} - -static unsigned long csi_round_rate(struct clk *clk, unsigned long rate) -{ - u32 pre, post, parent = clk_get_rate(clk->parent); - u32 div = parent / rate; - - if (parent % rate) - div++; - - __calc_pre_post_dividers(div, &pre, &post); - - return parent / (pre * post); -} - -static int csi_set_rate(struct clk *clk, unsigned long rate) -{ - u32 reg, div, pre, post, parent = clk_get_rate(clk->parent); - - div = parent / rate; - - if ((parent / div) != rate) - return -EINVAL; - - __calc_pre_post_dividers(div, &pre, &post); - - /* Set CSI clock divider */ - reg = __raw_readl(MXC_CCM_PDR0) & - ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK); - reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET; - reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET; - __raw_writel(reg, MXC_CCM_PDR0); - - return 0; -} - -static unsigned long ssi1_get_rate(struct clk *clk) -{ - unsigned long ssi1_pdf, ssi1_prepdf; - - ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK, - MXC_CCM_PDR1_SSI1_PODF_OFFSET); - ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK, - MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET); - return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1); -} - -static unsigned long ssi2_get_rate(struct clk *clk) -{ - unsigned long ssi2_pdf, ssi2_prepdf; - - ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK, - MXC_CCM_PDR1_SSI2_PODF_OFFSET); - ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK, - MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET); - return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1); -} - -static unsigned long firi_get_rate(struct clk *clk) -{ - unsigned long firi_pdf, firi_prepdf; - - firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK, - MXC_CCM_PDR1_FIRI_PODF_OFFSET); - firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK, - MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET); - return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1); -} - -static unsigned long firi_round_rate(struct clk *clk, unsigned long rate) -{ - u32 pre, post; - u32 parent = clk_get_rate(clk->parent); - u32 div = parent / rate; - - if (parent % rate) - div++; - - __calc_pre_post_dividers(div, &pre, &post); - - return parent / (pre * post); - -} - -static int firi_set_rate(struct clk *clk, unsigned long rate) -{ - u32 reg, div, pre, post, parent = clk_get_rate(clk->parent); - - div = parent / rate; - - if ((parent / div) != rate) - return -EINVAL; - - __calc_pre_post_dividers(div, &pre, &post); - - /* Set FIRI clock divider */ - reg = __raw_readl(MXC_CCM_PDR1) & - ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK); - reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET; - reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET; - __raw_writel(reg, MXC_CCM_PDR1); - - return 0; -} - -static unsigned long mbx_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / 2; -} - -static unsigned long mstick1_get_rate(struct clk *clk) -{ - unsigned long msti_pdf; - - msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK, - MXC_CCM_PDR2_MST1_PDF_OFFSET); - return clk_get_rate(clk->parent) / (msti_pdf + 1); -} - -static unsigned long mstick2_get_rate(struct clk *clk) -{ - unsigned long msti_pdf; - - msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK, - MXC_CCM_PDR2_MST2_PDF_OFFSET); - return clk_get_rate(clk->parent) / (msti_pdf + 1); -} - -static unsigned long ckih_rate; - -static unsigned long clk_ckih_get_rate(struct clk *clk) -{ - return ckih_rate; -} - -static unsigned long clk_ckil_get_rate(struct clk *clk) -{ - return CKIL_CLK_FREQ; -} - -static struct clk ckih_clk = { - .get_rate = clk_ckih_get_rate, -}; - -static struct clk mcu_pll_clk = { - .parent = &ckih_clk, - .get_rate = mcu_pll_get_rate, -}; - -static struct clk mcu_main_clk = { - .parent = &mcu_pll_clk, - .get_rate = mcu_main_get_rate, -}; - -static struct clk serial_pll_clk = { - .parent = &ckih_clk, - .get_rate = serial_pll_get_rate, - .enable = serial_pll_enable, - .disable = serial_pll_disable, -}; - -static struct clk usb_pll_clk = { - .parent = &ckih_clk, - .get_rate = usb_pll_get_rate, - .enable = usb_pll_enable, - .disable = usb_pll_disable, -}; - -static struct clk ahb_clk = { - .parent = &mcu_main_clk, - .get_rate = ahb_get_rate, -}; - -#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \ - static struct clk name = { \ - .id = i, \ - .enable_reg = er, \ - .enable_shift = es, \ - .get_rate = gr, \ - .enable = cgr_enable, \ - .disable = cgr_disable, \ - .secondary = s, \ - .parent = p, \ - } - -#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \ - static struct clk name = { \ - .id = i, \ - .enable_reg = er, \ - .enable_shift = es, \ - .get_rate = getsetround##_get_rate, \ - .set_rate = getsetround##_set_rate, \ - .round_rate = getsetround##_round_rate, \ - .enable = cgr_enable, \ - .disable = cgr_disable, \ - .secondary = s, \ - .parent = p, \ - } - -DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); - -DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk); -DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk); -DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk); - -DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk); -DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk); -DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk); -DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk); -DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk); -DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk); -DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk); -DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk); -DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk); - -DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk); -DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk); -DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk); -DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk); -DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk); - -DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk); -DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk); -DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, - -static struct clk_lookup lookups[] = { - _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk) - _REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk) - _REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk) - _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK(NULL, "pwm", pwm_clk) - _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) - _REGISTER_CLOCK(NULL, "rtc", rtc_clk) - _REGISTER_CLOCK(NULL, "epit", epit1_clk) - _REGISTER_CLOCK(NULL, "epit", epit2_clk) - _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) - _REGISTER_CLOCK("ipu-core", NULL, ipu_clk) - _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk) - _REGISTER_CLOCK(NULL, "kpp", kpp_clk) - _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1) - _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2) - _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1) - _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2) - _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1) - _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2) - _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1) - _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2) - _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) - _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) - _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) - _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) - _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk) - _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) - _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) - _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) - _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) - _REGISTER_CLOCK(NULL, "firi", firi_clk) - _REGISTER_CLOCK(NULL, "ata", ata_clk) - _REGISTER_CLOCK(NULL, "rtic", rtic_clk) - _REGISTER_CLOCK(NULL, "rng", rng_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1) - _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2) - _REGISTER_CLOCK(NULL, "mstick", mstick1_clk) - _REGISTER_CLOCK(NULL, "mstick", mstick2_clk) - _REGISTER_CLOCK(NULL, "scc", scc_clk) - _REGISTER_CLOCK(NULL, "iim", iim_clk) - _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk) - _REGISTER_CLOCK(NULL, "mbx", mbx_clk) -}; - -int __init mx31_clocks_init(unsigned long fref) -{ - u32 reg; - - ckih_rate = fref; - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - /* change the csi_clk parent if necessary */ - reg = __raw_readl(MXC_CCM_CCMR); - if (!(reg & MXC_CCM_CCMR_CSCS)) - if (clk_set_parent(&csi_clk, &usb_pll_clk)) - pr_err("%s: error changing csi_clk parent\n", __func__); - - - /* Turn off all possible clocks */ - __raw_writel((3 << 4), MXC_CCM_CGR0); - __raw_writel(0, MXC_CCM_CGR1); - __raw_writel((3 << 8) | (3 << 14) | (3 << 16)| - 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for - MX32, but still required to be set */ - MXC_CCM_CGR2); - - /* - * Before turning off usb_pll make sure ipg_per_clk is generated - * by ipg_clk and not usb_pll. - */ - __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR); - - usb_pll_disable(&usb_pll_clk); - - pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk)); - - clk_enable(&gpt_clk); - clk_enable(&emi_clk); - clk_enable(&iim_clk); - - clk_enable(&serial_pll_clk); - - mx31_read_cpu_rev(); - - if (mx31_revision() >= MX31_CHIP_REV_2_0) { - reg = __raw_readl(MXC_CCM_PMCR1); - /* No PLL restart on DVFS switch; enable auto EMI handshake */ - reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN; - __raw_writel(reg, MXC_CCM_PMCR1); - } - - mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), - MX31_INT_GPT); - - return 0; -} - diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c deleted file mode 100644 index 61e4a318980..00000000000 --- a/arch/arm/mach-mx3/clock-imx35.c +++ /dev/null @@ -1,551 +0,0 @@ -/* - * Copyright (C) 2009 by Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <asm/clkdev.h> - -#include <mach/clock.h> -#include <mach/hardware.h> -#include <mach/common.h> - -#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR) - -#define CCM_CCMR 0x00 -#define CCM_PDR0 0x04 -#define CCM_PDR1 0x08 -#define CCM_PDR2 0x0C -#define CCM_PDR3 0x10 -#define CCM_PDR4 0x14 -#define CCM_RCSR 0x18 -#define CCM_MPCTL 0x1C -#define CCM_PPCTL 0x20 -#define CCM_ACMR 0x24 -#define CCM_COSR 0x28 -#define CCM_CGR0 0x2C -#define CCM_CGR1 0x30 -#define CCM_CGR2 0x34 -#define CCM_CGR3 0x38 - -#ifdef HAVE_SET_RATE_SUPPORT -static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost) -{ - u32 min_pre, temp_pre, old_err, err; - - min_pre = (div - 1) / maxpost + 1; - old_err = 8; - - for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) { - if (div > (temp_pre * maxpost)) - break; - - if (div < (temp_pre * temp_pre)) - continue; - - err = div % temp_pre; - - if (err == 0) { - *pre = temp_pre; - break; - } - - err = temp_pre - err; - - if (err < old_err) { - old_err = err; - *pre = temp_pre; - } - } - - *post = (div + *pre - 1) / *pre; -} - -/* get the best values for a 3-bit divider combined with a 6-bit divider */ -static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post) -{ - if (div >= 512) { - *pre = 8; - *post = 64; - } else if (div >= 64) { - calc_dividers(div, pre, post, 64); - } else if (div <= 8) { - *pre = div; - *post = 1; - } else { - *pre = 1; - *post = div; - } -} - -/* get the best values for two cascaded 3-bit dividers */ -static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post) -{ - if (div >= 64) { - *pre = *post = 8; - } else if (div > 8) { - calc_dividers(div, pre, post, 8); - } else { - *pre = 1; - *post = div; - } -} -#endif - -static unsigned long get_rate_mpll(void) -{ - ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL); - - return mxc_decode_pll(mpctl, 24000000); -} - -static unsigned long get_rate_ppll(void) -{ - ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL); - - return mxc_decode_pll(ppctl, 24000000); -} - -struct arm_ahb_div { - unsigned char arm, ahb, sel; -}; - -static struct arm_ahb_div clk_consumer[] = { - { .arm = 1, .ahb = 4, .sel = 0}, - { .arm = 1, .ahb = 3, .sel = 1}, - { .arm = 2, .ahb = 2, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 4, .ahb = 1, .sel = 0}, - { .arm = 1, .ahb = 5, .sel = 0}, - { .arm = 1, .ahb = 8, .sel = 0}, - { .arm = 1, .ahb = 6, .sel = 1}, - { .arm = 2, .ahb = 4, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 4, .ahb = 2, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, -}; - -static unsigned long get_rate_arm(void) -{ - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); - struct arm_ahb_div *aad; - unsigned long fref = get_rate_mpll(); - - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - if (aad->sel) - fref = fref * 3 / 4; - - return fref / aad->arm; -} - -static unsigned long get_rate_ahb(struct clk *clk) -{ - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); - struct arm_ahb_div *aad; - unsigned long fref = get_rate_arm(); - - aad = &clk_consumer[(pdr0 >> 16) & 0xf]; - - return fref / aad->ahb; -} - -static unsigned long get_rate_ipg(struct clk *clk) -{ - return get_rate_ahb(NULL) >> 1; -} - -static unsigned long get_rate_uart(struct clk *clk) -{ - unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); - unsigned long div = ((pdr4 >> 10) & 0x3f) + 1; - - if (pdr3 & (1 << 14)) - return get_rate_arm() / div; - else - return get_rate_ppll() / div; -} - -static unsigned long get_rate_sdhc(struct clk *clk) -{ - unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); - unsigned long div, rate; - - if (pdr3 & (1 << 6)) - rate = get_rate_arm(); - else - rate = get_rate_ppll(); - - switch (clk->id) { - default: - case 0: - div = pdr3 & 0x3f; - break; - case 1: - div = (pdr3 >> 8) & 0x3f; - break; - case 2: - div = (pdr3 >> 16) & 0x3f; - break; - } - - return rate / (div + 1); -} - -static unsigned long get_rate_mshc(struct clk *clk) -{ - unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1); - unsigned long div1, div2, rate; - - if (pdr1 & (1 << 7)) - rate = get_rate_arm(); - else - rate = get_rate_ppll(); - - div1 = (pdr1 >> 29) & 0x7; - div2 = (pdr1 >> 22) & 0x3f; - - return rate / ((div1 + 1) * (div2 + 1)); -} - -static unsigned long get_rate_ssi(struct clk *clk) -{ - unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2); - unsigned long div1, div2, rate; - - if (pdr2 & (1 << 6)) - rate = get_rate_arm(); - else - rate = get_rate_ppll(); - - switch (clk->id) { - default: - case 0: - div1 = pdr2 & 0x3f; - div2 = (pdr2 >> 24) & 0x7; - break; - case 1: - div1 = (pdr2 >> 8) & 0x3f; - div2 = (pdr2 >> 27) & 0x7; - break; - } - - return rate / ((div1 + 1) * (div2 + 1)); -} - -static unsigned long get_rate_csi(struct clk *clk) -{ - unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2); - unsigned long rate; - - if (pdr2 & (1 << 7)) - rate = get_rate_arm(); - else - rate = get_rate_ppll(); - - return rate / (((pdr2 >> 16) & 0x3f) + 1); -} - -static unsigned long get_rate_otg(struct clk *clk) -{ - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); - unsigned long rate; - - if (pdr4 & (1 << 9)) - rate = get_rate_arm(); - else - rate = get_rate_ppll(); - - return rate / (((pdr4 >> 22) & 0x3f) + 1); -} - -static unsigned long get_rate_ipg_per(struct clk *clk) -{ - unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); - unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); - unsigned long div; - - if (pdr0 & (1 << 26)) { - div = (pdr4 >> 16) & 0x3f; - return get_rate_arm() / (div + 1); - } else { - div = (pdr0 >> 12) & 0x7; - return get_rate_ahb(NULL) / (div + 1); - } -} - -static unsigned long get_rate_hsp(struct clk *clk) -{ - unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03; - unsigned long fref = get_rate_mpll(); - - if (fref > 400 * 1000 * 1000) { - switch (hsp_podf) { - case 0: - return fref >> 2; - case 1: - return fref >> 3; - case 2: - return fref / 3; - } - } else { - switch (hsp_podf) { - case 0: - case 2: - return fref / 3; - case 1: - return fref / 6; - } - } - - return 0; -} - -static int clk_cgr_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg |= 3 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - - return 0; -} - -static void clk_cgr_disable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(3 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); -} - -#define DEFINE_CLOCK(name, i, er, es, gr, sr) \ - static struct clk name = { \ - .id = i, \ - .enable_reg = CCM_BASE + er, \ - .enable_shift = es, \ - .get_rate = gr, \ - .set_rate = sr, \ - .enable = clk_cgr_enable, \ - .disable = clk_cgr_disable, \ - } - -DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL); -DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL); -/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */ -DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL); -DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL); -DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL); -DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL); -DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL); -DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL); -DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg, NULL); -DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg, NULL); -DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL); -DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL); -DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL); -DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL); - -DEFINE_CLOCK(fec_clk, 0, CCM_CGR1, 0, get_rate_ipg, NULL); -DEFINE_CLOCK(gpio1_clk, 0, CCM_CGR1, 2, NULL, NULL); -DEFINE_CLOCK(gpio2_clk, 1, CCM_CGR1, 4, NULL, NULL); -DEFINE_CLOCK(gpio3_clk, 2, CCM_CGR1, 6, NULL, NULL); -DEFINE_CLOCK(gpt_clk, 0, CCM_CGR1, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL); -DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL); -DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL); -DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL); -DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_hsp, NULL); -DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL); -DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL); -DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL); -DEFINE_CLOCK(owire_clk, 0, CCM_CGR1, 26, get_rate_ipg_per, NULL); -DEFINE_CLOCK(pwm_clk, 0, CCM_CGR1, 28, get_rate_ipg_per, NULL); -DEFINE_CLOCK(rngc_clk, 0, CCM_CGR1, 30, get_rate_ipg, NULL); - -DEFINE_CLOCK(rtc_clk, 0, CCM_CGR2, 0, get_rate_ipg, NULL); -DEFINE_CLOCK(rtic_clk, 0, CCM_CGR2, 2, get_rate_ahb, NULL); -DEFINE_CLOCK(scc_clk, 0, CCM_CGR2, 4, get_rate_ipg, NULL); -DEFINE_CLOCK(sdma_clk, 0, CCM_CGR2, 6, NULL, NULL); -DEFINE_CLOCK(spba_clk, 0, CCM_CGR2, 8, get_rate_ipg, NULL); -DEFINE_CLOCK(spdif_clk, 0, CCM_CGR2, 10, NULL, NULL); -DEFINE_CLOCK(ssi1_clk, 0, CCM_CGR2, 12, get_rate_ssi, NULL); -DEFINE_CLOCK(ssi2_clk, 1, CCM_CGR2, 14, get_rate_ssi, NULL); -DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL); -DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL); -DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL); -DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL); -DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL); -DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL); -DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL); - -DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL); -DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL); -DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); - -DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL); - -static int clk_dummy_enable(struct clk *clk) -{ - return 0; -} - -static void clk_dummy_disable(struct clk *clk) -{ -} - -static unsigned long get_rate_nfc(struct clk *clk) -{ - unsigned long div1; - - div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1; - - return get_rate_ahb(NULL) / div1; -} - -/* NAND Controller: It seems it can't be disabled */ -static struct clk nfc_clk = { - .id = 0, - .enable_reg = 0, - .enable_shift = 0, - .get_rate = get_rate_nfc, - .set_rate = NULL, /* set_rate_nfc, */ - .enable = clk_dummy_enable, - .disable = clk_dummy_disable -}; - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, - -static struct clk_lookup lookups[] = { - _REGISTER_CLOCK(NULL, "asrc", asrc_clk) - _REGISTER_CLOCK(NULL, "ata", ata_clk) - _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) - _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) - _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) - _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk) - _REGISTER_CLOCK(NULL, "ect", ect_clk) - _REGISTER_CLOCK(NULL, "edio", edio_clk) - _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk) - _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk) - _REGISTER_CLOCK(NULL, "esai", esai_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) - _REGISTER_CLOCK(NULL, "gpio", gpio1_clk) - _REGISTER_CLOCK(NULL, "gpio", gpio2_clk) - _REGISTER_CLOCK(NULL, "gpio", gpio3_clk) - _REGISTER_CLOCK("gpt.0", NULL, gpt_clk) - _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) - _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) - _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) - _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk) - _REGISTER_CLOCK("ipu-core", NULL, ipu_clk) - _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk) - _REGISTER_CLOCK(NULL, "kpp", kpp_clk) - _REGISTER_CLOCK(NULL, "mlb", mlb_clk) - _REGISTER_CLOCK(NULL, "mshc", mshc_clk) - _REGISTER_CLOCK("mxc_w1", NULL, owire_clk) - _REGISTER_CLOCK(NULL, "pwm", pwm_clk) - _REGISTER_CLOCK(NULL, "rngc", rngc_clk) - _REGISTER_CLOCK(NULL, "rtc", rtc_clk) - _REGISTER_CLOCK(NULL, "rtic", rtic_clk) - _REGISTER_CLOCK(NULL, "scc", scc_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) - _REGISTER_CLOCK(NULL, "spba", spba_clk) - _REGISTER_CLOCK(NULL, "spdif", spdif_clk) - _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) - _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) - _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) - _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) - _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) - _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk) - _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) - _REGISTER_CLOCK(NULL, "max", max_clk) - _REGISTER_CLOCK(NULL, "audmux", audmux_clk) - _REGISTER_CLOCK(NULL, "csi", csi_clk) - _REGISTER_CLOCK(NULL, "iim", iim_clk) - _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk) - _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) -}; - -int __init mx35_clocks_init() -{ - unsigned int cgr2 = 3 << 26, cgr3 = 0; - -#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) - cgr2 |= 3 << 16; -#endif - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - /* Turn off all clocks except the ones we need to survive, namely: - * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart - */ - __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); - __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), - CCM_BASE + CCM_CGR1); - - /* - * Check if we came up in internal boot mode. If yes, we need some - * extra clocks turned on, otherwise the MX35 boot ROM code will - * hang after a watchdog reset. - */ - if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) { - /* Additionally turn on UART1, SCC, and IIM clocks */ - cgr2 |= 3 << 16 | 3 << 4; - cgr3 |= 3 << 2; - } - - __raw_writel(cgr2, CCM_BASE + CCM_CGR2); - __raw_writel(cgr3, CCM_BASE + CCM_CGR3); - - clk_enable(&iim_clk); - mx35_read_cpu_rev(); - -#ifdef CONFIG_MXC_USE_EPIT - epit_timer_init(&epit1_clk, - MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); -#else - mxc_timer_init(&gpt_clk, - MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); -#endif - - return 0; -} - diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c deleted file mode 100644 index d00a7545781..00000000000 --- a/arch/arm/mach-mx3/cpu.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * MX3 CPU type detection - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/iim.h> - -unsigned int mx31_cpu_rev; -EXPORT_SYMBOL(mx31_cpu_rev); - -struct mx3_cpu_type { - u8 srev; - const char *name; - const char *v; - unsigned int rev; -}; - -static struct mx3_cpu_type mx31_cpu_type[] __initdata = { - { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = MX3x_CHIP_REV_1_0 }, - { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 }, - { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 }, - { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 }, - { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 }, - { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 }, - { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 }, - { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 }, - { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 }, -}; - -void __init mx31_read_cpu_rev(void) -{ - u32 i, srev; - - /* read SREV register from IIM module */ - srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); - - for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) - if (srev == mx31_cpu_type[i].srev) { - printk(KERN_INFO - "CPU identified as %s, silicon rev %s\n", - mx31_cpu_type[i].name, mx31_cpu_type[i].v); - - mx31_cpu_rev = mx31_cpu_type[i].rev; - return; - } - - printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev); -} - -unsigned int mx35_cpu_rev; -EXPORT_SYMBOL(mx35_cpu_rev); - -void __init mx35_read_cpu_rev(void) -{ - u32 rev; - char *srev = "unknown"; - - rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); - switch (rev) { - case 0x00: - mx35_cpu_rev = MX3x_CHIP_REV_1_0; - srev = "1.0"; - break; - case 0x10: - mx35_cpu_rev = MX3x_CHIP_REV_2_0; - srev = "2.0"; - break; - case 0x11: - mx35_cpu_rev = MX3x_CHIP_REV_2_1; - srev = "2.1"; - break; - } - - printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev); -} diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h deleted file mode 100644 index 37a8a07beda..00000000000 --- a/arch/arm/mach-mx3/crm_regs.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__ -#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__ - -#define CKIH_CLK_FREQ 26000000 -#define CKIH_CLK_FREQ_27MHZ 27000000 -#define CKIL_CLK_FREQ 32768 - -#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) - -/* Register addresses */ -#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00) -#define MXC_CCM_PDR0 (MXC_CCM_BASE + 0x04) -#define MXC_CCM_PDR1 (MXC_CCM_BASE + 0x08) -#define MXC_CCM_RCSR (MXC_CCM_BASE + 0x0C) -#define MXC_CCM_MPCTL (MXC_CCM_BASE + 0x10) -#define MXC_CCM_UPCTL (MXC_CCM_BASE + 0x14) -#define MXC_CCM_SRPCTL (MXC_CCM_BASE + 0x18) -#define MXC_CCM_COSR (MXC_CCM_BASE + 0x1C) -#define MXC_CCM_CGR0 (MXC_CCM_BASE + 0x20) -#define MXC_CCM_CGR1 (MXC_CCM_BASE + 0x24) -#define MXC_CCM_CGR2 (MXC_CCM_BASE + 0x28) -#define MXC_CCM_WIMR (MXC_CCM_BASE + 0x2C) -#define MXC_CCM_LDC (MXC_CCM_BASE + 0x30) -#define MXC_CCM_DCVR0 (MXC_CCM_BASE + 0x34) -#define MXC_CCM_DCVR1 (MXC_CCM_BASE + 0x38) -#define MXC_CCM_DCVR2 (MXC_CCM_BASE + 0x3C) -#define MXC_CCM_DCVR3 (MXC_CCM_BASE + 0x40) -#define MXC_CCM_LTR0 (MXC_CCM_BASE + 0x44) -#define MXC_CCM_LTR1 (MXC_CCM_BASE + 0x48) -#define MXC_CCM_LTR2 (MXC_CCM_BASE + 0x4C) -#define MXC_CCM_LTR3 (MXC_CCM_BASE + 0x50) -#define MXC_CCM_LTBR0 (MXC_CCM_BASE + 0x54) -#define MXC_CCM_LTBR1 (MXC_CCM_BASE + 0x58) -#define MXC_CCM_PMCR0 (MXC_CCM_BASE + 0x5C) -#define MXC_CCM_PMCR1 (MXC_CCM_BASE + 0x60) -#define MXC_CCM_PDR2 (MXC_CCM_BASE + 0x64) - -/* Register bit definitions */ -#define MXC_CCM_CCMR_WBEN (1 << 27) -#define MXC_CCM_CCMR_CSCS (1 << 25) -#define MXC_CCM_CCMR_PERCS (1 << 24) -#define MXC_CCM_CCMR_SSI1S_OFFSET 18 -#define MXC_CCM_CCMR_SSI1S_MASK (0x3 << 18) -#define MXC_CCM_CCMR_SSI2S_OFFSET 21 -#define MXC_CCM_CCMR_SSI2S_MASK (0x3 << 21) -#define MXC_CCM_CCMR_LPM_OFFSET 14 -#define MXC_CCM_CCMR_LPM_MASK (0x3 << 14) -#define MXC_CCM_CCMR_FIRS_OFFSET 11 -#define MXC_CCM_CCMR_FIRS_MASK (0x3 << 11) -#define MXC_CCM_CCMR_UPE (1 << 9) -#define MXC_CCM_CCMR_SPE (1 << 8) -#define MXC_CCM_CCMR_MDS (1 << 7) -#define MXC_CCM_CCMR_SBYCS (1 << 4) -#define MXC_CCM_CCMR_MPE (1 << 3) -#define MXC_CCM_CCMR_PRCS_OFFSET 1 -#define MXC_CCM_CCMR_PRCS_MASK (0x3 << 1) - -#define MXC_CCM_PDR0_CSI_PODF_OFFSET 26 -#define MXC_CCM_PDR0_CSI_PODF_MASK (0x3F << 26) -#define MXC_CCM_PDR0_CSI_PRDF_OFFSET 23 -#define MXC_CCM_PDR0_CSI_PRDF_MASK (0x7 << 23) -#define MXC_CCM_PDR0_PER_PODF_OFFSET 16 -#define MXC_CCM_PDR0_PER_PODF_MASK (0x1F << 16) -#define MXC_CCM_PDR0_HSP_PODF_OFFSET 11 -#define MXC_CCM_PDR0_HSP_PODF_MASK (0x7 << 11) -#define MXC_CCM_PDR0_NFC_PODF_OFFSET 8 -#define MXC_CCM_PDR0_NFC_PODF_MASK (0x7 << 8) -#define MXC_CCM_PDR0_IPG_PODF_OFFSET 6 -#define MXC_CCM_PDR0_IPG_PODF_MASK (0x3 << 6) -#define MXC_CCM_PDR0_MAX_PODF_OFFSET 3 -#define MXC_CCM_PDR0_MAX_PODF_MASK (0x7 << 3) -#define MXC_CCM_PDR0_MCU_PODF_OFFSET 0 -#define MXC_CCM_PDR0_MCU_PODF_MASK 0x7 - -#define MXC_CCM_PDR1_USB_PRDF_OFFSET 30 -#define MXC_CCM_PDR1_USB_PRDF_MASK (0x3 << 30) -#define MXC_CCM_PDR1_USB_PODF_OFFSET 27 -#define MXC_CCM_PDR1_USB_PODF_MASK (0x7 << 27) -#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET 24 -#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK (0x7 << 24) -#define MXC_CCM_PDR1_FIRI_PODF_OFFSET 18 -#define MXC_CCM_PDR1_FIRI_PODF_MASK (0x3F << 18) -#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET 15 -#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK (0x7 << 15) -#define MXC_CCM_PDR1_SSI2_PODF_OFFSET 9 -#define MXC_CCM_PDR1_SSI2_PODF_MASK (0x3F << 9) -#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET 6 -#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK (0x7 << 6) -#define MXC_CCM_PDR1_SSI1_PODF_OFFSET 0 -#define MXC_CCM_PDR1_SSI1_PODF_MASK 0x3F - -/* Bit definitions for RCSR */ -#define MXC_CCM_RCSR_NF16B 0x80000000 - -/* - * LTR0 register offsets - */ -#define MXC_CCM_LTR0_DIV3CK_OFFSET 1 -#define MXC_CCM_LTR0_DIV3CK_MASK (0x3 << 1) -#define MXC_CCM_LTR0_DNTHR_OFFSET 16 -#define MXC_CCM_LTR0_DNTHR_MASK (0x3F << 16) -#define MXC_CCM_LTR0_UPTHR_OFFSET 22 -#define MXC_CCM_LTR0_UPTHR_MASK (0x3F << 22) - -/* - * LTR1 register offsets - */ -#define MXC_CCM_LTR1_PNCTHR_OFFSET 0 -#define MXC_CCM_LTR1_PNCTHR_MASK 0x3F -#define MXC_CCM_LTR1_UPCNT_OFFSET 6 -#define MXC_CCM_LTR1_UPCNT_MASK (0xFF << 6) -#define MXC_CCM_LTR1_DNCNT_OFFSET 14 -#define MXC_CCM_LTR1_DNCNT_MASK (0xFF << 14) -#define MXC_CCM_LTR1_LTBRSR_MASK 0x400000 -#define MXC_CCM_LTR1_LTBRSR_OFFSET 22 -#define MXC_CCM_LTR1_LTBRSR 0x400000 -#define MXC_CCM_LTR1_LTBRSH 0x800000 - -/* - * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15 - */ -#define MXC_CCM_LTR2_WSW_OFFSET(x) (11 + (x) * 3) -#define MXC_CCM_LTR2_WSW_MASK(x) (0x7 << \ - MXC_CCM_LTR2_WSW_OFFSET((x))) -#define MXC_CCM_LTR2_EMAC_OFFSET 0 -#define MXC_CCM_LTR2_EMAC_MASK 0x1FF - -/* - * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8 - */ -#define MXC_CCM_LTR3_WSW_OFFSET(x) (5 + (x) * 3) -#define MXC_CCM_LTR3_WSW_MASK(x) (0x7 << \ - MXC_CCM_LTR3_WSW_OFFSET((x))) - -#define MXC_CCM_PMCR0_DFSUP1 0x80000000 -#define MXC_CCM_PMCR0_DFSUP1_SPLL (0 << 31) -#define MXC_CCM_PMCR0_DFSUP1_MPLL (1 << 31) -#define MXC_CCM_PMCR0_DFSUP0 0x40000000 -#define MXC_CCM_PMCR0_DFSUP0_PLL (0 << 30) -#define MXC_CCM_PMCR0_DFSUP0_PDR (1 << 30) -#define MXC_CCM_PMCR0_DFSUP_MASK (0x3 << 30) - -#define DVSUP_TURBO 0 -#define DVSUP_HIGH 1 -#define DVSUP_MEDIUM 2 -#define DVSUP_LOW 3 -#define MXC_CCM_PMCR0_DVSUP_TURBO (DVSUP_TURBO << 28) -#define MXC_CCM_PMCR0_DVSUP_HIGH (DVSUP_HIGH << 28) -#define MXC_CCM_PMCR0_DVSUP_MEDIUM (DVSUP_MEDIUM << 28) -#define MXC_CCM_PMCR0_DVSUP_LOW (DVSUP_LOW << 28) -#define MXC_CCM_PMCR0_DVSUP_OFFSET 28 -#define MXC_CCM_PMCR0_DVSUP_MASK (0x3 << 28) -#define MXC_CCM_PMCR0_UDSC 0x08000000 -#define MXC_CCM_PMCR0_UDSC_MASK (1 << 27) -#define MXC_CCM_PMCR0_UDSC_UP (1 << 27) -#define MXC_CCM_PMCR0_UDSC_DOWN (0 << 27) - -#define MXC_CCM_PMCR0_VSCNT_1 (0x0 << 24) -#define MXC_CCM_PMCR0_VSCNT_2 (0x1 << 24) -#define MXC_CCM_PMCR0_VSCNT_3 (0x2 << 24) -#define MXC_CCM_PMCR0_VSCNT_4 (0x3 << 24) -#define MXC_CCM_PMCR0_VSCNT_5 (0x4 << 24) -#define MXC_CCM_PMCR0_VSCNT_6 (0x5 << 24) -#define MXC_CCM_PMCR0_VSCNT_7 (0x6 << 24) -#define MXC_CCM_PMCR0_VSCNT_8 (0x7 << 24) -#define MXC_CCM_PMCR0_VSCNT_OFFSET 24 -#define MXC_CCM_PMCR0_VSCNT_MASK (0x7 << 24) -#define MXC_CCM_PMCR0_DVFEV 0x00800000 -#define MXC_CCM_PMCR0_DVFIS 0x00400000 -#define MXC_CCM_PMCR0_LBMI 0x00200000 -#define MXC_CCM_PMCR0_LBFL 0x00100000 -#define MXC_CCM_PMCR0_LBCF_4 (0x0 << 18) -#define MXC_CCM_PMCR0_LBCF_8 (0x1 << 18) -#define MXC_CCM_PMCR0_LBCF_12 (0x2 << 18) -#define MXC_CCM_PMCR0_LBCF_16 (0x3 << 18) -#define MXC_CCM_PMCR0_LBCF_OFFSET 18 -#define MXC_CCM_PMCR0_LBCF_MASK (0x3 << 18) -#define MXC_CCM_PMCR0_PTVIS 0x00020000 -#define MXC_CCM_PMCR0_UPDTEN 0x00010000 -#define MXC_CCM_PMCR0_UPDTEN_MASK (0x1 << 16) -#define MXC_CCM_PMCR0_FSVAIM 0x00008000 -#define MXC_CCM_PMCR0_FSVAI_OFFSET 13 -#define MXC_CCM_PMCR0_FSVAI_MASK (0x3 << 13) -#define MXC_CCM_PMCR0_DPVCR 0x00001000 -#define MXC_CCM_PMCR0_DPVV 0x00000800 -#define MXC_CCM_PMCR0_WFIM 0x00000400 -#define MXC_CCM_PMCR0_DRCE3 0x00000200 -#define MXC_CCM_PMCR0_DRCE2 0x00000100 -#define MXC_CCM_PMCR0_DRCE1 0x00000080 -#define MXC_CCM_PMCR0_DRCE0 0x00000040 -#define MXC_CCM_PMCR0_DCR 0x00000020 -#define MXC_CCM_PMCR0_DVFEN 0x00000010 -#define MXC_CCM_PMCR0_PTVAIM 0x00000008 -#define MXC_CCM_PMCR0_PTVAI_OFFSET 1 -#define MXC_CCM_PMCR0_PTVAI_MASK (0x3 << 1) -#define MXC_CCM_PMCR0_DPTEN 0x00000001 - -#define MXC_CCM_PMCR1_DVGP_OFFSET 0 -#define MXC_CCM_PMCR1_DVGP_MASK (0xF) - -#define MXC_CCM_PMCR1_PLLRDIS (0x1 << 7) -#define MXC_CCM_PMCR1_EMIRQ_EN (0x1 << 8) - -#define MXC_CCM_DCVR_ULV_MASK (0x3FF << 22) -#define MXC_CCM_DCVR_ULV_OFFSET 22 -#define MXC_CCM_DCVR_LLV_MASK (0x3FF << 12) -#define MXC_CCM_DCVR_LLV_OFFSET 12 -#define MXC_CCM_DCVR_ELV_MASK (0x3FF << 2) -#define MXC_CCM_DCVR_ELV_OFFSET 2 - -#define MXC_CCM_PDR2_MST2_PDF_MASK (0x3F << 7) -#define MXC_CCM_PDR2_MST2_PDF_OFFSET 7 -#define MXC_CCM_PDR2_MST1_PDF_MASK 0x3F -#define MXC_CCM_PDR2_MST1_PDF_OFFSET 0 - -#define MXC_CCM_COSR_CLKOSEL_MASK 0x0F -#define MXC_CCM_COSR_CLKOSEL_OFFSET 0 -#define MXC_CCM_COSR_CLKOUTDIV_MASK (0x07 << 6) -#define MXC_CCM_COSR_CLKOUTDIV_OFFSET 6 -#define MXC_CCM_COSR_CLKOEN (1 << 9) - -/* - * PMCR0 register offsets - */ -#define MXC_CCM_PMCR0_LBFL_OFFSET 20 -#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30 -#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31 - -#endif /* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */ diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h deleted file mode 100644 index de9598590eb..00000000000 --- a/arch/arm/mach-mx3/devices-imx31.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <mach/mx31.h> -#include <mach/devices-common.h> - -extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst; -#define imx31_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) -#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata) -#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata) -#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata) - -extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst; -#define imx31_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst; -#define imx31_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata) -#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata) -#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata) -#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata) -#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) -#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) - -extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst; -#define imx31_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) - -extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst; -#define imx31_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx31_cspi_data[id], pdata) -#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata) -#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata) -#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h deleted file mode 100644 index 5eb917b638d..00000000000 --- a/arch/arm/mach-mx3/devices-imx35.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <mach/mx35.h> -#include <mach/devices-common.h> - -extern const struct imx_fec_data imx35_fec_data __initconst; -#define imx35_add_fec(pdata) \ - imx_add_fec(&imx35_fec_data, pdata) - -#define imx35_add_flexcan0(pdata) \ - imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata) -#define imx35_add_flexcan1(pdata) \ - imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata) - -extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst; -#define imx35_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata) -#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata) -#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata) -#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) - -extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst; -#define imx35_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst; -#define imx35_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata) -#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata) -#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) -#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) - -extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst; -#define imx35_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) - -extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst; -#define imx35_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx35_cspi_data[id], pdata) -#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) -#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata) - -extern const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst; -#define imx35_add_esdhc(id, pdata) \ - imx_add_esdhc(&imx35_esdhc_data[id], pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c deleted file mode 100644 index d4da9496089..00000000000 --- a/arch/arm/mach-mx3/devices.c +++ /dev/null @@ -1,362 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/dma-mapping.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/common.h> -#include <mach/mx3_camera.h> - -#include "devices.h" - -/* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = IO_ADDRESS(GPIO1_BASE_ADDR), - .irq = MXC_INT_GPIO1, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = IO_ADDRESS(GPIO2_BASE_ADDR), - .irq = MXC_INT_GPIO2, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = IO_ADDRESS(GPIO3_BASE_ADDR), - .irq = MXC_INT_GPIO3, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - } -}; - -int __init imx3x_register_gpios(void) -{ - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); -} - -static struct resource mxc_w1_master_resources[] = { - { - .start = OWIRE_BASE_ADDR, - .end = OWIRE_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_w1_master_device = { - .name = "mxc_w1", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_w1_master_resources), - .resource = mxc_w1_master_resources, -}; - -#ifdef CONFIG_ARCH_MX31 -static struct resource mxcsdhc0_resources[] = { - { - .start = MX31_MMC_SDHC1_BASE_ADDR, - .end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_MMC_SDHC1, - .end = MX31_INT_MMC_SDHC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxcsdhc1_resources[] = { - { - .start = MX31_MMC_SDHC2_BASE_ADDR, - .end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_MMC_SDHC2, - .end = MX31_INT_MMC_SDHC2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxcsdhc_device0 = { - .name = "mxc-mmc", - .id = 0, - .num_resources = ARRAY_SIZE(mxcsdhc0_resources), - .resource = mxcsdhc0_resources, -}; - -struct platform_device mxcsdhc_device1 = { - .name = "mxc-mmc", - .id = 1, - .num_resources = ARRAY_SIZE(mxcsdhc1_resources), - .resource = mxcsdhc1_resources, -}; - -static struct resource rnga_resources[] = { - { - .start = RNGA_BASE_ADDR, - .end = RNGA_BASE_ADDR + 0x28, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_rnga_device = { - .name = "mxc_rnga", - .id = -1, - .num_resources = 1, - .resource = rnga_resources, -}; -#endif /* CONFIG_ARCH_MX31 */ - -/* i.MX31 Image Processing Unit */ - -/* The resource order is important! */ -static struct resource mx3_ipu_rsrc[] = { - { - .start = IPU_CTRL_BASE_ADDR, - .end = IPU_CTRL_BASE_ADDR + 0x5F, - .flags = IORESOURCE_MEM, - }, { - .start = IPU_CTRL_BASE_ADDR + 0x88, - .end = IPU_CTRL_BASE_ADDR + 0xB3, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_IPU_SYN, - .end = MXC_INT_IPU_SYN, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC_INT_IPU_ERR, - .end = MXC_INT_IPU_ERR, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx3_ipu = { - .name = "ipu-core", - .id = -1, - .num_resources = ARRAY_SIZE(mx3_ipu_rsrc), - .resource = mx3_ipu_rsrc, -}; - -static struct resource fb_resources[] = { - { - .start = IPU_CTRL_BASE_ADDR + 0xB4, - .end = IPU_CTRL_BASE_ADDR + 0x1BF, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mx3_fb = { - .name = "mx3_sdc_fb", - .id = -1, - .num_resources = ARRAY_SIZE(fb_resources), - .resource = fb_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource camera_resources[] = { - { - .start = IPU_CTRL_BASE_ADDR + 0x60, - .end = IPU_CTRL_BASE_ADDR + 0x87, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mx3_camera = { - .name = "mx3-camera", - .id = 0, - .num_resources = ARRAY_SIZE(camera_resources), - .resource = camera_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource otg_resources[] = { - { - .start = MX31_OTG_BASE_ADDR, - .end = MX31_OTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB3, - .end = MXC_INT_USB3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 otg_dmamask = DMA_BIT_MASK(32); - -/* OTG gadget device */ -struct platform_device mxc_otg_udc_device = { - .name = "fsl-usb2-udc", - .id = -1, - .dev = { - .dma_mask = &otg_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* OTG host */ -struct platform_device mxc_otg_host = { - .name = "mxc-ehci", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &otg_dmamask, - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* USB host 1 */ - -static u64 usbh1_dmamask = ~(u32)0; - -static struct resource mxc_usbh1_resources[] = { - { - .start = MX31_OTG_BASE_ADDR + 0x200, - .end = MX31_OTG_BASE_ADDR + 0x3ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB1, - .end = MXC_INT_USB1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh1 = { - .name = "mxc-ehci", - .id = 1, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh1_dmamask, - }, - .resource = mxc_usbh1_resources, - .num_resources = ARRAY_SIZE(mxc_usbh1_resources), -}; - -/* USB host 2 */ -static u64 usbh2_dmamask = ~(u32)0; - -static struct resource mxc_usbh2_resources[] = { - { - .start = MX31_OTG_BASE_ADDR + 0x400, - .end = MX31_OTG_BASE_ADDR + 0x5ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB2, - .end = MXC_INT_USB2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh2 = { - .name = "mxc-ehci", - .id = 2, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh2_dmamask, - }, - .resource = mxc_usbh2_resources, - .num_resources = ARRAY_SIZE(mxc_usbh2_resources), -}; - -static struct resource imx_wdt_resources[] = { - { - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device imx_wdt_device0 = { - .name = "imx2-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(imx_wdt_resources), - .resource = imx_wdt_resources, -}; - -static struct resource imx_rtc_resources[] = { - { - .start = MX31_RTC_BASE_ADDR, - .end = MX31_RTC_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX31_INT_RTC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_rtc_device0 = { - .name = "mxc_rtc", - .id = -1, - .num_resources = ARRAY_SIZE(imx_rtc_resources), - .resource = imx_rtc_resources, -}; - -static struct resource imx_kpp_resources[] = { - { - .start = MX3x_KPP_BASE_ADDR, - .end = MX3x_KPP_BASE_ADDR + 0xf, - .flags = IORESOURCE_MEM - }, { - .start = MX3x_INT_KPP, - .end = MX3x_INT_KPP, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_kpp_device = { - .name = "imx-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(imx_kpp_resources), - .resource = imx_kpp_resources, -}; - -static int __init mx3_devices_init(void) -{ -#if defined(CONFIG_ARCH_MX31) - if (cpu_is_mx31()) { - imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR; - imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff; - mxc_register_device(&mxc_rnga_device, NULL); - } -#endif -#if defined(CONFIG_ARCH_MX35) - if (cpu_is_mx35()) { - otg_resources[0].start = MX35_OTG_BASE_ADDR; - otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff; - otg_resources[1].start = MXC_INT_USBOTG; - otg_resources[1].end = MXC_INT_USBOTG; - mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400; - mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; - mxc_usbh1_resources[1].start = MXC_INT_USBHS; - mxc_usbh1_resources[1].end = MXC_INT_USBHS; - imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; - imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; - } -#endif - - return 0; -} - -subsys_initcall(mx3_devices_init); diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h deleted file mode 100644 index 585f814473d..00000000000 --- a/arch/arm/mach-mx3/devices.h +++ /dev/null @@ -1,14 +0,0 @@ -extern struct platform_device mxc_w1_master_device; -extern struct platform_device mx3_ipu; -extern struct platform_device mx3_fb; -extern struct platform_device mx3_camera; -extern struct platform_device mxcsdhc_device0; -extern struct platform_device mxcsdhc_device1; -extern struct platform_device mxc_otg_udc_device; -extern struct platform_device mxc_otg_host; -extern struct platform_device mxc_usbh1; -extern struct platform_device mxc_usbh2; -extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_wdt_device0; -extern struct platform_device imx_rtc_device0; -extern struct platform_device imx_kpp_device; diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c deleted file mode 100644 index 1abc10d5292..00000000000 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <video/platform_lcd.h> -#include <linux/i2c.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/imx-uart.h> -#include <mach/iomux-mx35.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> -#include <mach/audmux.h> - -#include "devices-imx35.h" -#include "devices.h" - -static const struct fb_videomode fb_modedb[] = { - { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = KHZ2PICOS(6500), - .left_margin = 68, - .right_margin = 20, - .upper_margin = 15, - .lower_margin = 4, - .hsync_len = 30, - .vsync_len = 3, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, - { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .left_margin = 100, - .right_margin = 100, - .upper_margin = 7, - .lower_margin = 100, - .hsync_len = 7, - .vsync_len = 7, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, - { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .left_margin = 75, - .right_margin = 75, - .upper_margin = 7, - .lower_margin = 75, - .hsync_len = 7, - .vsync_len = 7, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, - .name = "CMO-QVGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct pad_desc eukrea_mbimxsd_pads[] = { - /* LCD */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - /* Backlight */ - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - /* LCD_PWR */ - MX35_PAD_D3_CLS__GPIO1_4, - /* LED */ - MX35_PAD_LD23__GPIO3_29, - /* SWITCH */ - MX35_PAD_LD19__GPIO3_25, - /* UART2 */ - MX35_PAD_CTS2__UART2_CTS, - MX35_PAD_RTS2__UART2_RTS, - MX35_PAD_TXD2__UART2_TXD_MUX, - MX35_PAD_RXD2__UART2_RXD_MUX, - /* I2S */ - MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, - MX35_PAD_STXD4__AUDMUX_AUD4_TXD, - MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, - MX35_PAD_SCK4__AUDMUX_AUD4_TXC, - /* CAN2 */ - MX35_PAD_TX5_RX0__CAN2_TXCAN, - MX35_PAD_TX4_RX1__CAN2_RXCAN, - /* SDCARD */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, -}; - -#define GPIO_LED1 (2 * 32 + 29) -#define GPIO_SWITCH1 (2 * 32 + 25) -#define GPIO_LCDPWR (4) - -static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDPWR, 1); - else - gpio_direction_output(GPIO_LCDPWR, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = { - .set_power = eukrea_mbimxsd_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, -}; - -static struct gpio_led eukrea_mbimxsd_leds[] = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { - .leds = eukrea_mbimxsd_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), -}; - -static struct platform_device eukrea_mbimxsd_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &eukrea_mbimxsd_led_info, - }, -}; - -static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = { - .buttons = eukrea_mbimxsd_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), -}; - -static struct platform_device eukrea_mbimxsd_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &eukrea_mbimxsd_button_data, - } -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_leds_gpio, - &eukrea_mbimxsd_button_device, - &eukrea_mbimxsd_lcd_powerdev, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -/* - * system init for baseboard usage. Will be called by cpuimx35 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd35_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, - ARRAY_SIZE(eukrea_mbimxsd_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) - /* SSI unit master I2S codec connected to SSI_AUD4 */ - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | - MXC_AUDMUX_V2_PTCR_TFSDIR | - MXC_AUDMUX_V2_PTCR_TFSEL(3) | - MXC_AUDMUX_V2_PTCR_TCLKDIR | - MXC_AUDMUX_V2_PTCR_TCSEL(3), - MXC_AUDMUX_V2_PDCR_RXDSEL(3) - ); - mxc_audmux_v2_configure_port(3, - MXC_AUDMUX_V2_PTCR_SYN, - MXC_AUDMUX_V2_PDCR_RXDSEL(0) - ); -#endif - - imx35_add_imx_uart1(&uart_pdata); - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); - - imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); - - imx35_add_flexcan1(NULL); - imx35_add_esdhc(0, NULL); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDPWR, "LCDPWR"); - gpio_direction_output(GPIO_LCDPWR, 1); - gpio_free(GPIO_LCDPWR); - - i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); -} diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-mx3/iomux-imx31.c deleted file mode 100644 index a1d7fa5123d..00000000000 --- a/arch/arm/mach-mx3/iomux-imx31.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <mach/iomux-mx3.h> - -/* - * IOMUX register (base) addresses - */ -#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR) -#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000) -#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004) -#define IOMUXGPR (IOMUX_BASE + 0x008) -#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C) -#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154) - -static DEFINE_SPINLOCK(gpio_mux_lock); - -#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) - -unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; -/* - * set the mode for a IOMUX pin. - */ -int mxc_iomux_mode(unsigned int pin_mode) -{ - u32 field, l, mode, ret = 0; - void __iomem *reg; - - reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK); - field = pin_mode & 0x3; - mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT; - - spin_lock(&gpio_mux_lock); - - l = __raw_readl(reg); - l &= ~(0xff << (field * 8)); - l |= mode << (field * 8); - __raw_writel(l, reg); - - spin_unlock(&gpio_mux_lock); - - return ret; -} -EXPORT_SYMBOL(mxc_iomux_mode); - -/* - * This function configures the pad value for a IOMUX pin. - */ -void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) -{ - u32 field, l; - void __iomem *reg; - - pin &= IOMUX_PADNUM_MASK; - reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4; - field = (pin + 2) % 3; - - pr_debug("%s: reg offset = 0x%x, field = %d\n", - __func__, (pin + 2) / 3, field); - - spin_lock(&gpio_mux_lock); - - l = __raw_readl(reg); - l &= ~(0x1ff << (field * 10)); - l |= config << (field * 10); - __raw_writel(l, reg); - - spin_unlock(&gpio_mux_lock); -} -EXPORT_SYMBOL(mxc_iomux_set_pad); - -/* - * allocs a single pin: - * - reserves the pin so that it is not claimed by another driver - * - setups the iomux according to the configuration - */ -int mxc_iomux_alloc_pin(const unsigned int pin, const char *label) -{ - unsigned pad = pin & IOMUX_PADNUM_MASK; - - if (pad >= (PIN_MAX + 1)) { - printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", - pad, label ? label : "?"); - return -EINVAL; - } - - if (test_and_set_bit(pad, mxc_pin_alloc_map)) { - printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", - pad, label ? label : "?"); - return -EBUSY; - } - mxc_iomux_mode(pin); - - return 0; -} -EXPORT_SYMBOL(mxc_iomux_alloc_pin); - -int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count, - const char *label) -{ - unsigned int *p = pin_list; - int i; - int ret = -EINVAL; - - for (i = 0; i < count; i++) { - ret = mxc_iomux_alloc_pin(*p, label); - if (ret) - goto setup_error; - p++; - } - return 0; - -setup_error: - mxc_iomux_release_multiple_pins(pin_list, i); - return ret; -} -EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); - -void mxc_iomux_release_pin(const unsigned int pin) -{ - unsigned pad = pin & IOMUX_PADNUM_MASK; - - if (pad < (PIN_MAX + 1)) - clear_bit(pad, mxc_pin_alloc_map); -} -EXPORT_SYMBOL(mxc_iomux_release_pin); - -void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count) -{ - unsigned int *p = pin_list; - int i; - - for (i = 0; i < count; i++) { - mxc_iomux_release_pin(*p); - p++; - } -} -EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) -{ - u32 l; - - spin_lock(&gpio_mux_lock); - l = __raw_readl(IOMUXGPR); - if (en) - l |= gp; - else - l &= ~gp; - - __raw_writel(l, IOMUXGPR); - spin_unlock(&gpio_mux_lock); -} -EXPORT_SYMBOL(mxc_iomux_set_gpr); diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c deleted file mode 100644 index aaa30fe18f8..00000000000 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ /dev/null @@ -1,579 +0,0 @@ -/* - * armadillo5x0.c - * - * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * updates in http://alberdroid.blogspot.com/ - * - * Based on Atmark Techno, Inc. armadillo 500 BSP 2008 - * Based on mx31ads.c and pcm037.c Great Work! - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/smsc911x.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/i2c.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/delay.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/mmc.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> -#include <mach/ulpi.h> - -#include "devices-imx31.h" -#include "devices.h" -#include "crm_regs.h" - -static int armadillo5x0_pins[] = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - /* UART2 */ - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - /* LAN9118_IRQ */ - IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), - /* SDHC1 */ - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, - /* Framebuffer */ - MX31_PIN_LD0__LD0, - MX31_PIN_LD1__LD1, - MX31_PIN_LD2__LD2, - MX31_PIN_LD3__LD3, - MX31_PIN_LD4__LD4, - MX31_PIN_LD5__LD5, - MX31_PIN_LD6__LD6, - MX31_PIN_LD7__LD7, - MX31_PIN_LD8__LD8, - MX31_PIN_LD9__LD9, - MX31_PIN_LD10__LD10, - MX31_PIN_LD11__LD11, - MX31_PIN_LD12__LD12, - MX31_PIN_LD13__LD13, - MX31_PIN_LD14__LD14, - MX31_PIN_LD15__LD15, - MX31_PIN_LD16__LD16, - MX31_PIN_LD17__LD17, - MX31_PIN_VSYNC3__VSYNC3, - MX31_PIN_HSYNC__HSYNC, - MX31_PIN_FPSHIFT__FPSHIFT, - MX31_PIN_DRDY0__DRDY0, - IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ - /* I2C2 */ - MX31_PIN_CSPI2_MOSI__SCL, - MX31_PIN_CSPI2_MISO__SDA, - /* OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - /* USB host 2 */ - IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), -}; - -/* USB */ -#if defined(CONFIG_USB_ULPI) - -#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4) -#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6) -#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3) - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int usbotg_init(struct platform_device *pdev) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - /* Chip already enabled by hardware */ - /* OTG phy reset*/ - err = gpio_request(OTG_RESET, "USB-OTG-RESET"); - if (err) { - pr_err("Failed to request the usb otg reset gpio\n"); - return err; - } - - err = gpio_direction_output(OTG_RESET, 1/*HIGH*/); - if (err) { - pr_err("Failed to reset the usb otg phy\n"); - goto otg_free_reset; - } - - gpio_set_value(OTG_RESET, 0/*LOW*/); - mdelay(5); - gpio_set_value(OTG_RESET, 1/*HIGH*/); - - return 0; - -otg_free_reset: - gpio_free(OTG_RESET); - return err; -} - -static int usbh2_init(struct platform_device *pdev) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_UH2, true); - - - /* Enable the chip */ - err = gpio_request(USBH2_CS, "USB-H2-CS"); - if (err) { - pr_err("Failed to request the usb host 2 CS gpio\n"); - return err; - } - - err = gpio_direction_output(USBH2_CS, 0/*Enabled*/); - if (err) { - pr_err("Failed to drive the usb host 2 CS gpio\n"); - goto h2_free_cs; - } - - /* H2 phy reset*/ - err = gpio_request(USBH2_RESET, "USB-H2-RESET"); - if (err) { - pr_err("Failed to request the usb host 2 reset gpio\n"); - goto h2_free_cs; - } - - err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/); - if (err) { - pr_err("Failed to reset the usb host 2 phy\n"); - goto h2_free_reset; - } - - gpio_set_value(USBH2_RESET, 0/*LOW*/); - mdelay(5); - gpio_set_value(USBH2_RESET, 1/*HIGH*/); - - return 0; - -h2_free_reset: - gpio_free(USBH2_RESET); -h2_free_cs: - gpio_free(USBH2_CS); - return err; -} - -static struct mxc_usbh_platform_data usbotg_pdata = { - .init = usbotg_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, -}; - -static struct mxc_usbh_platform_data usbh2_pdata = { - .init = usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, -}; -#endif /* CONFIG_USB_ULPI */ - -/* RTC over I2C*/ -#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) - -static struct i2c_board_info armadillo5x0_i2c_rtc = { - I2C_BOARD_INFO("s35390a", 0x30), -}; - -/* GPIO BUTTONS */ -static struct gpio_keys_button armadillo5x0_buttons[] = { - { - .code = KEY_ENTER, /*28*/ - .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0), - .active_low = 1, - .desc = "menu", - .wakeup = 1, - }, { - .code = KEY_BACK, /*158*/ - .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0), - .active_low = 1, - .desc = "back", - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data armadillo5x0_button_data = { - .buttons = armadillo5x0_buttons, - .nbuttons = ARRAY_SIZE(armadillo5x0_buttons), -}; - -static struct platform_device armadillo5x0_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &armadillo5x0_button_data, - } -}; - -/* - * NAND Flash - */ -static const struct mxc_nand_platform_data -armadillo5x0_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -/* - * MTD NOR Flash - */ -static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { - { - .name = "nor.bootloader", - .offset = 0x00000000, - .size = 4*32*1024, - }, { - .name = "nor.kernel", - .offset = MTDPART_OFS_APPEND, - .size = 16*128*1024, - }, { - .name = "nor.userland", - .offset = MTDPART_OFS_APPEND, - .size = 110*128*1024, - }, { - .name = "nor.config", - .offset = MTDPART_OFS_APPEND, - .size = 1*128*1024, - }, -}; - -static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { - .width = 2, - .parts = armadillo5x0_nor_flash_partitions, - .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), -}; - -static struct resource armadillo5x0_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = MX31_CS0_BASE_ADDR, - .end = MX31_CS0_BASE_ADDR + SZ_64M - 1, -}; - -static struct platform_device armadillo5x0_nor_flash = { - .name = "physmap-flash", - .id = -1, - .num_resources = 1, - .resource = &armadillo5x0_nor_flash_resource, -}; - -/* - * FB support - */ -static const struct fb_videomode fb_modedb[] = { - { /* 640x480 @ 60 Hz */ - .name = "CRT-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 35, - .right_margin = 115, - .upper_margin = 43, - .lower_margin = 1, - .hsync_len = 10, - .vsync_len = 1, - .sync = FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, {/* 800x600 @ 56 Hz */ - .name = "CRT-SVGA", - .refresh = 56, - .xres = 800, - .yres = 600, - .pixclock = 30000, - .left_margin = 30, - .right_margin = 108, - .upper_margin = 13, - .lower_margin = 10, - .hsync_len = 10, - .vsync_len = 1, - .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, - .name = "CRT-VGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -/* - * SDHC 1 - * MMC support - */ -static int armadillo5x0_sdhc1_get_ro(struct device *dev) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); -} - -static int armadillo5x0_sdhc1_init(struct device *dev, - irq_handler_t detect_irq, void *data) -{ - int ret; - int gpio_det, gpio_wp; - - gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK); - gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B); - - ret = gpio_request(gpio_det, "sdhc-card-detect"); - if (ret) - return ret; - - gpio_direction_input(gpio_det); - - ret = gpio_request(gpio_wp, "sdhc-write-protect"); - if (ret) - goto err_gpio_free; - - gpio_direction_input(gpio_wp); - - /* When supported the trigger type have to be BOTH */ - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "sdhc-detect", data); - - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: - gpio_free(gpio_wp); - -err_gpio_free: - gpio_free(gpio_det); - - return ret; - -} - -static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data); - gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); - gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); -} - -static struct imxmmc_platform_data sdhc_pdata = { - .get_ro = armadillo5x0_sdhc1_get_ro, - .init = armadillo5x0_sdhc1_init, - .exit = armadillo5x0_sdhc1_exit, -}; - -/* - * SMSC 9118 - * Network support - */ -static struct resource armadillo5x0_smc911x_resources[] = { - { - .start = MX31_CS3_BASE_ADDR, - .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_16BIT, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, -}; - -static struct platform_device armadillo5x0_smc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources), - .resource = armadillo5x0_smc911x_resources, - .dev = { - .platform_data = &smsc911x_info, - }, -}; - -/* UART device data */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct platform_device *devices[] __initdata = { - &armadillo5x0_smc911x_device, - &armadillo5x0_button_device, -}; - -/* - * Perform board specific initializations - */ -static void __init armadillo5x0_init(void) -{ - mxc_iomux_setup_multiple_pins(armadillo5x0_pins, - ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - imx31_add_imx_i2c1(NULL); - - /* Register UART */ - imx31_add_imx_uart0(&uart_pdata); - imx31_add_imx_uart1(&uart_pdata); - - /* SMSC9118 IRQ pin */ - gpio_direction_input(MX31_PIN_GPIO1_0); - - /* Register SDHC */ - mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); - - /* Register FB */ - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); - - /* Register NOR Flash */ - mxc_register_device(&armadillo5x0_nor_flash, - &armadillo5x0_nor_flash_pdata); - - /* Register NAND Flash */ - imx31_add_mxc_nand(&armadillo5x0_nand_board_info); - - /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); - - /* RTC */ - /* Get RTC IRQ and register the chip */ - if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0) - armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO); - else - gpio_free(ARMADILLO5X0_RTC_GPIO); - } - if (armadillo5x0_i2c_rtc.irq == 0) - pr_warning("armadillo5x0_init: failed to get RTC IRQ\n"); - i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); - - /* USB */ -#if defined(CONFIG_USB_ULPI) - usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - mxc_register_device(&mxc_otg_host, &usbotg_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); -#endif -} - -static void __init armadillo5x0_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -static struct sys_timer armadillo5x0_timer = { - .init = armadillo5x0_timer_init, -}; - -MACHINE_START(ARMADILLO5X0, "Armadillo-500") - /* Maintainer: Alberto Panizzo */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .timer = &armadillo5x0_timer, - .init_machine = armadillo5x0_init, -MACHINE_END diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c deleted file mode 100644 index 9fde873f588..00000000000 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * Copyright (C) 2009 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> -#include <linux/i2c-gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include <mach/eukrea-baseboards.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> -#include <mach/mxc_nand.h> -#include <mach/mxc_ehci.h> - -#include "devices-imx35.h" -#include "devices.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data - eukrea_cpuimx35_i2c0_data __initconst = { - .bitrate = 100000, -}; - -static struct tsc2007_platform_data tsc2007_info = { - .model = 2007, - .x_plate_ohms = 180, -}; - -#define TSC2007_IRQGPIO (2 * 32 + 2) -static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("tsc2007", 0x48), - .type = "tsc2007", - .platform_data = &tsc2007_info, - .irq = gpio_to_irq(TSC2007_IRQGPIO), - }, -}; - -static struct platform_device *devices[] __initdata = { - &imx_wdt_device0, -}; - -static struct pad_desc eukrea_cpuimx35_pads[] = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* TSC2007 IRQ */ - MX35_PAD_ATA_DA2__GPIO3_2, -}; - -static const struct mxc_nand_platform_data - eukrea_cpuimx35_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static struct mxc_usbh_platform_data __maybe_unused otg_pdata = { - .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, -}; - -static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = { - .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, -}; - -static struct fsl_usb2_platform_data otg_device_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -}; - -static int otg_mode_host; - -static int __init eukrea_cpuimx35_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = 1; - else if (!strcmp(options, "device")) - otg_mode_host = 0; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 0; -} -__setup("otg_mode=", eukrea_cpuimx35_otg_mode); - -/* - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, - ARRAY_SIZE(eukrea_cpuimx35_pads)); - - imx35_add_fec(NULL); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx35_add_imx_uart0(&uart_pdata); - imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); - - i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); - imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); - - if (otg_mode_host) - mxc_register_device(&mxc_otg_host, &otg_pdata); - else - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); - - mxc_register_device(&mxc_usbh1, &usbh1_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD - eukrea_mbimxsd35_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx35_timer_init(void) -{ - mx35_clocks_init(); -} - -struct sys_timer eukrea_cpuimx35_timer = { - .init = eukrea_cpuimx35_timer_init, -}; - -MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") - /* Maintainer: Eukrea Electromatique */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &eukrea_cpuimx35_timer, -MACHINE_END diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c deleted file mode 100644 index 042cd5655e1..00000000000 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - * KZM-ARM11-01 support - * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> - * - * based on code for MX31ADS, - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/smsc911x.h> -#include <linux/types.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/setup.h> -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include <mach/clock.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/memory.h> - -#include "devices-imx31.h" -#include "devices.h" - -#define KZM_ARM11_IO_ADDRESS(x) ( \ - IMX_IO_ADDRESS(x, MX31_CS4) ?: \ - IMX_IO_ADDRESS(x, MX31_CS5) ?: \ - MX31_IO_ADDRESS(x)) - -/* - * KZM-ARM11-01 Board Control Registers on FPGA - */ -#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) -#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) -#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) -#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) -#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) -#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) -#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) -#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) - -/* - * External UART for touch panel on FPGA - */ -#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -/* - * KZM-ARM11-01 has an external UART on FPGA - */ -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550), - .mapbase = KZM_ARM11_16550, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), - .irqflags = IRQ_TYPE_EDGE_RISING, - .uartclk = 14745600, - .regshift = 0, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_BUGGY_UART, - }, - {}, -}; - -static struct resource serial8250_resources[] = { - { - .start = KZM_ARM11_16550, - .end = KZM_ARM11_16550 + 0x10, - .flags = IORESOURCE_MEM, - }, - { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, - .num_resources = ARRAY_SIZE(serial8250_resources), - .resource = serial8250_resources, -}; - -static int __init kzm_init_ext_uart(void) -{ - u8 tmp; - - /* - * GPIO 1-1: external UART interrupt line - */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int"); - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); - - /* - * Unmask UART interrupt - */ - tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); - tmp |= 0x2; - __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); - - return platform_device_register(&serial_device); -} -#else -static inline int kzm_init_ext_uart(void) -{ - return 0; -} -#endif - -/* - * SMSC LAN9118 - */ -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -static struct smsc911x_platform_config kzm_smsc9118_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct resource kzm_smsc9118_resources[] = { - { - .start = MX31_CS5_BASE_ADDR, - .end = MX31_CS5_BASE_ADDR + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device kzm_smsc9118_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(kzm_smsc9118_resources), - .resource = kzm_smsc9118_resources, - .dev = { - .platform_data = &kzm_smsc9118_config, - }, -}; - -static int __init kzm_init_smsc9118(void) -{ - /* - * GPIO 1-2: SMSC9118 interrupt line - */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO)); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); - - return platform_device_register(&kzm_smsc9118_device); -} -#else -static inline int kzm_init_smsc9118(void) -{ - return 0; -} -#endif - -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static void __init kzm_init_imx_uart(void) -{ - imx31_add_imx_uart0(&uart_pdata); - imx31_add_imx_uart1(&uart_pdata); -} -#else -static inline void kzm_init_imx_uart(void) -{ -} -#endif - -static int kzm_pins[] __initdata = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - MX31_PIN_DCD_DCE1__DCD_DCE1, - MX31_PIN_RI_DCE1__RI_DCE1, - MX31_PIN_DSR_DCE1__DSR_DCE1, - MX31_PIN_DTR_DCE1__DTR_DCE1, - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - MX31_PIN_DCD_DTE1__DCD_DTE2, - MX31_PIN_RI_DTE1__RI_DTE2, - MX31_PIN_DSR_DTE1__DSR_DTE2, - MX31_PIN_DTR_DTE1__DTR_DTE2, -}; - -/* - * Board specific initialization. - */ -static void __init kzm_board_init(void) -{ - mxc_iomux_setup_multiple_pins(kzm_pins, - ARRAY_SIZE(kzm_pins), "kzm"); - kzm_init_ext_uart(); - kzm_init_smsc9118(); - kzm_init_imx_uart(); - - pr_info("Clock input source is 26MHz\n"); -} - -/* - * This structure defines static mappings for the kzm-arm11-01 board. - */ -static struct map_desc kzm_io_desc[] __initdata = { - { - .virtual = MX31_CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = MX31_CS4_SIZE, - .type = MT_DEVICE - }, - { - .virtual = MX31_CS5_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), - .length = MX31_CS5_SIZE, - .type = MT_DEVICE - }, -}; - -/* - * Set up static virtual mappings. - */ -static void __init kzm_map_io(void) -{ - mx31_map_io(); - iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc)); -} - -static void __init kzm_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -static struct sys_timer kzm_timer = { - .init = kzm_timer_init, -}; - -/* - * The following uses standard kernel macros define in arch.h in order to - * initialize __mach_desc_KZM_ARM11_01 data structure. - */ -MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = kzm_map_io, - .init_irq = mx31_init_irq, - .init_machine = kzm_board_init, - .timer = &kzm_timer, -MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c deleted file mode 100644 index 0ad9e782108..00000000000 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/regulator/machine.h> -#include <linux/fsl_devices.h> -#include <linux/input/matrix_keypad.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/3ds_debugboard.h> - -#include "devices-imx31.h" -#include "devices.h" - -/* CPLD IRQ line for external uart, external ethernet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) - -/* - * This file contains the board-specific initialization routines. - */ - -static int mx31_3ds_pins[] = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), - /* SPI 1 */ - MX31_PIN_CSPI2_SCLK__SCLK, - MX31_PIN_CSPI2_MOSI__MOSI, - MX31_PIN_CSPI2_MISO__MISO, - MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS0__SS0, - MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */ - /* MC13783 IRQ */ - IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), - /* USB OTG reset */ - IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO), - /* USB OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - /*Keyboard*/ - MX31_PIN_KEY_ROW0_KEY_ROW0, - MX31_PIN_KEY_ROW1_KEY_ROW1, - MX31_PIN_KEY_ROW2_KEY_ROW2, - MX31_PIN_KEY_COL0_KEY_COL0, - MX31_PIN_KEY_COL1_KEY_COL1, - MX31_PIN_KEY_COL2_KEY_COL2, - MX31_PIN_KEY_COL3_KEY_COL3, -}; - -/* - * Matrix keyboard - */ - -static const uint32_t mx31_3ds_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), - KEY(1, 2, KEY_ENTER), - KEY(2, 0, KEY_F6), - KEY(2, 1, KEY_F8), - KEY(2, 2, KEY_F9), - KEY(2, 3, KEY_F10), -}; - -static struct matrix_keymap_data mx31_3ds_keymap_data = { - .keymap = mx31_3ds_keymap, - .keymap_size = ARRAY_SIZE(mx31_3ds_keymap), -}; - -/* Regulators */ -static struct regulator_init_data pwgtx_init = { - .constraints = { - .boot_on = 1, - .always_on = 1, - }, -}; - -static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { - { - .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */ - .init_data = &pwgtx_init, - }, { - .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */ - .init_data = &pwgtx_init, - }, -}; - -/* MC13783 */ -static struct mc13783_platform_data mc13783_pdata __initdata = { - .regulators = mx31_3ds_regulators, - .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), - .flags = MC13783_USE_REGULATOR, -}; - -/* SPI */ -static int spi1_internal_chipselect[] = { - MXC_SPI_CS(0), - MXC_SPI_CS(2), -}; - -static const struct spi_imx_master spi1_pdata __initconst = { - .chipselect = spi1_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), -}; - -static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { - { - .modalias = "mc13783", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 1, /* SS2 */ - .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), - .mode = SPI_CS_HIGH, - }, -}; - -/* - * NAND Flash - */ -static const struct mxc_nand_platform_data -mx31_3ds_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT - .flash_bbt = 1, -#endif -}; - -/* - * USB OTG - */ - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR) - -static int mx31_3ds_usbotg_init(void) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - err = gpio_request(USBOTG_RST_B, "otgusb-reset"); - if (err) { - pr_err("Failed to request the USB OTG reset gpio\n"); - return err; - } - - err = gpio_direction_output(USBOTG_RST_B, 0); - if (err) { - pr_err("Failed to drive the USB OTG reset gpio\n"); - goto usbotg_free_reset; - } - - mdelay(1); - gpio_set_value(USBOTG_RST_B, 1); - return 0; - -usbotg_free_reset: - gpio_free(USBOTG_RST_B); - return err; -} - -static struct fsl_usb2_platform_data usbotg_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* - * Set up static virtual mappings. - */ -static void __init mx31_3ds_map_io(void) -{ - mx31_map_io(); -} - -/*! - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), - "mx31_3ds"); - - imx31_add_imx_uart0(&uart_pdata); - imx31_add_mxc_nand(&mx31_3ds_nand_board_info); - - imx31_add_spi_imx1(&spi1_pdata); - spi_register_board_info(mx31_3ds_spi_devs, - ARRAY_SIZE(mx31_3ds_spi_devs)); - - mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data); - - mx31_3ds_usbotg_init(); - mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata); - - if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT)) - printk(KERN_WARNING "Init of the debug board failed, all " - "devices on the debug board are unusable.\n"); -} - -static void __init mx31_3ds_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -static struct sys_timer mx31_3ds_timer = { - .init = mx31_3ds_timer_init, -}; - -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31_3DS data structure. - */ -MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") - /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_3ds_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31_3ds_timer, -MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c deleted file mode 100644 index b993b9bf617..00000000000 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ /dev/null @@ -1,577 +0,0 @@ -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/serial_8250.h> -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/irq.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/board-mx31ads.h> -#include <mach/iomux-mx3.h> - -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 -#include <linux/mfd/wm8350/audio.h> -#include <linux/mfd/wm8350/core.h> -#include <linux/mfd/wm8350/pmic.h> -#endif - -#include "devices-imx31.h" -#include "devices.h" - -/* PBC Board interrupt status register */ -#define PBC_INTSTATUS 0x000016 - -/* PBC Board interrupt current status register */ -#define PBC_INTCURR_STATUS 0x000018 - -/* PBC Interrupt mask register set address */ -#define PBC_INTMASK_SET 0x00001A - -/* PBC Interrupt mask register clear address */ -#define PBC_INTMASK_CLEAR 0x00001C - -/* External UART A */ -#define PBC_SC16C652_UARTA 0x010000 - -/* External UART B */ -#define PBC_SC16C652_UARTB 0x010010 - -#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) -#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) -#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) - -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) - -#define MXC_MAX_EXP_IO_LINES 16 -/* - * This file contains the board-specific initialization routines. - */ - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -/*! - * The serial port definition structure. - */ -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), - .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA), - .irq = EXPIO_INT_XUART_INTA, - .uartclk = 14745600, - .regshift = 0, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, - }, { - .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), - .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB), - .irq = EXPIO_INT_XUART_INTB, - .uartclk = 14745600, - .regshift = 0, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ, - }, - {}, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static int __init mxc_init_extuart(void) -{ - return platform_device_register(&serial_device); -} -#else -static inline int mxc_init_extuart(void) -{ - return 0; -} -#endif - -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static unsigned int uart_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 -}; - -static inline void mxc_init_imx_uart(void) -{ - mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); - imx31_add_imx_uart0(&uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* !SERIAL_IMX */ - -static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 imr_val; - u32 int_valid; - u32 expio_irq; - - imr_val = __raw_readw(PBC_INTMASK_SET_REG); - int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val; - - expio_irq = MXC_EXP_IO_BASE; - for (; int_valid != 0; int_valid >>= 1, expio_irq++) { - if ((int_valid & 1) == 0) - continue; - - generic_handle_irq(expio_irq); - } -} - -/* - * Disable an expio pin's interrupt by setting the bit in the imr. - * @param irq an expio virtual irq number - */ -static void expio_mask_irq(u32 irq) -{ - u32 expio = MXC_IRQ_TO_EXPIO(irq); - /* mask the interrupt */ - __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG); - __raw_readw(PBC_INTMASK_CLEAR_REG); -} - -/* - * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. - * @param irq an expanded io virtual irq number - */ -static void expio_ack_irq(u32 irq) -{ - u32 expio = MXC_IRQ_TO_EXPIO(irq); - /* clear the interrupt status */ - __raw_writew(1 << expio, PBC_INTSTATUS_REG); -} - -/* - * Enable a expio pin's interrupt by clearing the bit in the imr. - * @param irq a expio virtual irq number - */ -static void expio_unmask_irq(u32 irq) -{ - u32 expio = MXC_IRQ_TO_EXPIO(irq); - /* unmask the interrupt */ - __raw_writew(1 << expio, PBC_INTMASK_SET_REG); -} - -static struct irq_chip expio_irq_chip = { - .name = "EXPIO(CPLD)", - .ack = expio_ack_irq, - .mask = expio_mask_irq, - .unmask = expio_unmask_irq, -}; - -static void __init mx31ads_init_expio(void) -{ - int i; - - printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n"); - - /* - * Configure INT line as GPIO input - */ - mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); - - /* disable the interrupt and clear the status */ - __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); - __raw_writew(0xFFFF, PBC_INTSTATUS_REG); - for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); - i++) { - set_irq_chip(i, &expio_irq_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH); - set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler); -} - -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 -/* This section defines setup for the Wolfson Microelectronics - * 1133-EV1 PMU/audio board. When other PMU boards are supported the - * regulator definitions may be shared with them, but for now they can - * only be used with this board so would generate warnings about - * unused statics and some of the configuration is specific to this - * module. - */ - -/* CPU */ -static struct regulator_consumer_supply sw1a_consumers[] = { - { - .supply = "cpu_vcc", - } -}; - -static struct regulator_init_data sw1a_data = { - .constraints = { - .name = "SW1A", - .min_uV = 1275000, - .max_uV = 1600000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .state_mem = { - .uV = 1400000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .initial_state = PM_SUSPEND_MEM, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers), - .consumer_supplies = sw1a_consumers, -}; - -/* System IO - High */ -static struct regulator_init_data viohi_data = { - .constraints = { - .name = "VIOHO", - .min_uV = 2800000, - .max_uV = 2800000, - .state_mem = { - .uV = 2800000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .initial_state = PM_SUSPEND_MEM, - .always_on = 1, - .boot_on = 1, - }, -}; - -/* System IO - Low */ -static struct regulator_init_data violo_data = { - .constraints = { - .name = "VIOLO", - .min_uV = 1800000, - .max_uV = 1800000, - .state_mem = { - .uV = 1800000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .initial_state = PM_SUSPEND_MEM, - .always_on = 1, - .boot_on = 1, - }, -}; - -/* DDR RAM */ -static struct regulator_init_data sw2a_data = { - .constraints = { - .name = "SW2A", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .state_mem = { - .uV = 1800000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - .state_disk = { - .mode = REGULATOR_MODE_NORMAL, - .enabled = 0, - }, - .always_on = 1, - .boot_on = 1, - .initial_state = PM_SUSPEND_MEM, - }, -}; - -static struct regulator_init_data ldo1_data = { - .constraints = { - .name = "VCAM/VMMC1/VMMC2", - .min_uV = 2800000, - .max_uV = 2800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, -}; - -static struct regulator_consumer_supply ldo2_consumers[] = { - { .supply = "AVDD", .dev_name = "1-001a" }, - { .supply = "HPVDD", .dev_name = "1-001a" }, -}; - -/* CODEC and SIM */ -static struct regulator_init_data ldo2_data = { - .constraints = { - .name = "VESIM/VSIM/AVDD", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .apply_uV = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), - .consumer_supplies = ldo2_consumers, -}; - -/* General */ -static struct regulator_init_data vdig_data = { - .constraints = { - .name = "VDIG", - .min_uV = 1500000, - .max_uV = 1500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - .always_on = 1, - .boot_on = 1, - }, -}; - -/* Tranceivers */ -static struct regulator_init_data ldo4_data = { - .constraints = { - .name = "VRF1/CVDD_2.775", - .min_uV = 2500000, - .max_uV = 2500000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .apply_uV = 1, - .always_on = 1, - .boot_on = 1, - }, -}; - -static struct wm8350_led_platform_data wm8350_led_data = { - .name = "wm8350:white", - .default_trigger = "heartbeat", - .max_uA = 27899, -}; - -static struct wm8350_audio_platform_data imx32ads_wm8350_setup = { - .vmid_discharge_msecs = 1000, - .drain_msecs = 30, - .cap_discharge_msecs = 700, - .vmid_charge_msecs = 700, - .vmid_s_curve = WM8350_S_CURVE_SLOW, - .dis_out4 = WM8350_DISCHARGE_SLOW, - .dis_out3 = WM8350_DISCHARGE_SLOW, - .dis_out2 = WM8350_DISCHARGE_SLOW, - .dis_out1 = WM8350_DISCHARGE_SLOW, - .vroi_out4 = WM8350_TIE_OFF_500R, - .vroi_out3 = WM8350_TIE_OFF_500R, - .vroi_out2 = WM8350_TIE_OFF_500R, - .vroi_out1 = WM8350_TIE_OFF_500R, - .vroi_enable = 0, - .codec_current_on = WM8350_CODEC_ISEL_1_0, - .codec_current_standby = WM8350_CODEC_ISEL_0_5, - .codec_current_charge = WM8350_CODEC_ISEL_1_5, -}; - -static int mx31_wm8350_init(struct wm8350 *wm8350) -{ - wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN, - WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW, - WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_ON); - - wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN, - WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH, - WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_ON); - - wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN, - WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH, - WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN, - WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH, - WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT, - WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH, - WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT, - WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW, - WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT, - WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW, - WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF, - WM8350_GPIO_DEBOUNCE_OFF); - - wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data); - wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data); - wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data); - wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data); - wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data); - wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data); - wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data); - wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data); - - /* LEDs */ - wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1, - WM8350_DC5_ERRACT_SHUTDOWN_CONV); - wm8350_isink_set_flash(wm8350, WM8350_ISINK_A, - WM8350_ISINK_FLASH_DISABLE, - WM8350_ISINK_FLASH_TRIG_BIT, - WM8350_ISINK_FLASH_DUR_32MS, - WM8350_ISINK_FLASH_ON_INSTANT, - WM8350_ISINK_FLASH_OFF_INSTANT, - WM8350_ISINK_FLASH_MODE_EN); - wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5, - WM8350_ISINK_MODE_BOOST, - WM8350_ISINK_ILIM_NORMAL, - WM8350_DC5_RMP_20V, - WM8350_DC5_FBSRC_ISINKA); - wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A, - &wm8350_led_data); - - wm8350->codec.platform_data = &imx32ads_wm8350_setup; - - regulator_has_full_constraints(); - - return 0; -} - -static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { - .init = mx31_wm8350_init, - .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES, -}; -#endif - -#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE) -static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 - { - I2C_BOARD_INFO("wm8350", 0x1a), - .platform_data = &mx31_wm8350_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), - }, -#endif -}; - -static void mxc_init_i2c(void) -{ - i2c_register_board_info(1, mx31ads_i2c1_devices, - ARRAY_SIZE(mx31ads_i2c1_devices)); - - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)); - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)); - - imx31_add_imx_i2c1(NULL); -} -#else -static void mxc_init_i2c(void) -{ -} -#endif - -static unsigned int ssi_pins[] = { - MX31_PIN_SFS5__SFS5, - MX31_PIN_SCK5__SCK5, - MX31_PIN_SRXD5__SRXD5, - MX31_PIN_STXD5__STXD5, -}; - -static void mxc_init_audio(void) -{ - imx31_add_imx_ssi(0, NULL); - mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); -} - -/*! - * This structure defines static mappings for the i.MX31ADS board. - */ -static struct map_desc mx31ads_io_desc[] __initdata = { - { - .virtual = MX31_CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = MX31_CS4_SIZE / 2, - .type = MT_DEVICE - }, -}; - -/*! - * Set up static virtual mappings. - */ -static void __init mx31ads_map_io(void) -{ - mx31_map_io(); - iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); -} - -static void __init mx31ads_init_irq(void) -{ - mx31_init_irq(); - mx31ads_init_expio(); -} - -/*! - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - mxc_init_extuart(); - mxc_init_imx_uart(); - mxc_init_i2c(); - mxc_init_audio(); -} - -static void __init mx31ads_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -static struct sys_timer mx31ads_timer = { - .init = mx31ads_timer_init, -}; - -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31ADS data structure. - */ -MACHINE_START(MX31ADS, "Freescale MX31ADS") - /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31ads_map_io, - .init_irq = mx31ads_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31ads_timer, -MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c deleted file mode 100644 index 42f47faa6fd..00000000000 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ /dev/null @@ -1,357 +0,0 @@ -/* - * LILLY-1131 module support - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * based on code for other MX31 boards, - * - * Copyright 2005-2007 Freescale Semiconductor - * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/spi.h> -#include <linux/mfd/mc13783.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lilly.h> -#include <mach/mxc_ehci.h> -#include <mach/ulpi.h> - -#include "devices-imx31.h" -#include "devices.h" - -/* - * This file contains module-specific initialization routines for LILLY-1131. - * Initialization of peripherals found on the baseboard is implemented in the - * appropriate baseboard support code. - */ - -/* SMSC ethernet support */ - -static struct resource smsc91x_resources[] = { - { - .start = MX31_CS4_BASE_ADDR, - .end = MX31_CS4_BASE_ADDR + 0xffff, - .flags = IORESOURCE_MEM, - }, - { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, - } -}; - -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | - SMSC911X_SAVE_MAC_ADDRESS | - SMSC911X_FORCE_INTERNAL_PHY, -}; - -static struct platform_device smsc91x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc91x_resources), - .resource = smsc91x_resources, - .dev = { - .platform_data = &smsc911x_config, - } -}; - -/* NOR flash */ -static struct physmap_flash_data nor_flash_data = { - .width = 2, -}; - -static struct resource nor_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device physmap_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = &nor_flash_resource, - .num_resources = 1, -}; - -/* USB */ - -#if defined(CONFIG_USB_ULPI) - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int usbotg_init(struct platform_device *pdev) -{ - unsigned int pins[] = { - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - }; - - mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG"); - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true); - mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true); - - /* chip select */ - mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO), - "USBOTG_CS"); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS"); - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0); - - return 0; -} - -static int usbh1_init(struct platform_device *pdev) -{ - int pins[] = { - MX31_PIN_CSPI1_MOSI__USBH1_RXDM, - MX31_PIN_CSPI1_MISO__USBH1_RXDP, - MX31_PIN_CSPI1_SS0__USBH1_TXDM, - MX31_PIN_CSPI1_SS1__USBH1_TXDP, - MX31_PIN_CSPI1_SS2__USBH1_RCV, - MX31_PIN_CSPI1_SCLK__USBH1_OEB, - MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, - }; - - mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1"); - - mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); - - return 0; -} - -static int usbh2_init(struct platform_device *pdev) -{ - int pins[] = { - MX31_PIN_USBH2_DATA0__USBH2_DATA0, - MX31_PIN_USBH2_DATA1__USBH2_DATA1, - MX31_PIN_USBH2_CLK__USBH2_CLK, - MX31_PIN_USBH2_DIR__USBH2_DIR, - MX31_PIN_USBH2_NXT__USBH2_NXT, - MX31_PIN_USBH2_STP__USBH2_STP, - }; - - mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_UH2, true); - - /* chip select */ - mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), - "USBH2_CS"); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); - - return 0; -} - -static struct mxc_usbh_platform_data usbotg_pdata = { - .init = usbotg_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, -}; - -static struct mxc_usbh_platform_data usbh1_pdata = { - .init = usbh1_init, - .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, -}; - -static struct mxc_usbh_platform_data usbh2_pdata = { - .init = usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, -}; - -static void lilly1131_usb_init(void) -{ - usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - mxc_register_device(&mxc_usbh1, &usbh1_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); -} - -#else -static inline void lilly1131_usb_init(void) {} -#endif /* CONFIG_USB_ULPI */ - -/* SPI */ - -static int spi_internal_chipselect[] = { - MXC_SPI_CS(0), - MXC_SPI_CS(1), - MXC_SPI_CS(2), -}; - -static const struct spi_imx_master spi0_pdata __initconst = { - .chipselect = spi_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), -}; - -static const struct spi_imx_master spi1_pdata __initconst = { - .chipselect = spi_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), -}; - -static struct mc13783_platform_data mc13783_pdata __initdata = { - .flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN, -}; - -static struct spi_board_info mc13783_dev __initdata = { - .modalias = "mc13783", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), -}; - -static struct platform_device *devices[] __initdata = { - &smsc91x_device, - &physmap_flash_device, -}; - -static int mx31lilly_baseboard; -core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); - -static void __init mx31lilly_board_init(void) -{ - switch (mx31lilly_baseboard) { - case MX31LILLY_NOBOARD: - break; - case MX31LILLY_DB: - mx31lilly_db_init(); - break; - default: - printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n", - mx31lilly_baseboard); - } - - mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); - - /* SPI */ - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2"); - - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1"); - mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2"); - - imx31_add_spi_imx0(&spi0_pdata); - imx31_add_spi_imx1(&spi1_pdata); - spi_register_board_info(&mc13783_dev, 1); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - /* USB */ - lilly1131_usb_init(); -} - -static void __init mx31lilly_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -static struct sys_timer mx31lilly_timer = { - .init = mx31lilly_timer_init, -}; - -MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mx31lilly_board_init, - .timer = &mx31lilly_timer, -MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c deleted file mode 100644 index b93895814cd..00000000000 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/memory.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/smsc911x.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/mtd/physmap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <asm/page.h> -#include <asm/setup.h> - -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/board-mx31lite.h> -#include <mach/iomux-mx3.h> -#include <mach/irqs.h> -#include <mach/mxc_ehci.h> -#include <mach/ulpi.h> - -#include "devices-imx31.h" -#include "devices.h" - -/* - * This file contains the module-specific initialization routines. - */ - -static unsigned int mx31lite_pins[] = { - /* LAN9117 IRQ pin */ - IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), - /* SPI 1 */ - MX31_PIN_CSPI2_SCLK__SCLK, - MX31_PIN_CSPI2_MOSI__MOSI, - MX31_PIN_CSPI2_MISO__MISO, - MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS0__SS0, - MX31_PIN_CSPI2_SS1__SS1, - MX31_PIN_CSPI2_SS2__SS2, -}; - -static const struct mxc_nand_platform_data -mx31lite_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT, -}; - -static struct resource smsc911x_resources[] = { - { - .start = MX31_CS4_BASE_ADDR, - .end = MX31_CS4_BASE_ADDR + 0x100, - .flags = IORESOURCE_MEM, - }, { - .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), - .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_config, - }, -}; - -/* - * SPI - * - * The MC13783 is the only hard-wired SPI device on the module. - */ - -static int spi_internal_chipselect[] = { - MXC_SPI_CS(0), -}; - -static const struct spi_imx_master spi1_pdata __initconst = { - .chipselect = spi_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), -}; - -static struct mc13783_platform_data mc13783_pdata __initdata = { - .flags = MC13783_USE_RTC | - MC13783_USE_REGULATOR, -}; - -static struct spi_board_info mc13783_spi_dev __initdata = { - .modalias = "mc13783", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), -}; - -/* - * USB - */ - -#if defined(CONFIG_USB_ULPI) -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int usbh2_init(struct platform_device *pdev) -{ - int pins[] = { - MX31_PIN_USBH2_DATA0__USBH2_DATA0, - MX31_PIN_USBH2_DATA1__USBH2_DATA1, - MX31_PIN_USBH2_CLK__USBH2_CLK, - MX31_PIN_USBH2_DIR__USBH2_DIR, - MX31_PIN_USBH2_NXT__USBH2_NXT, - MX31_PIN_USBH2_STP__USBH2_STP, - }; - - mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); - - mxc_iomux_set_gpr(MUX_PGP_UH2, true); - - /* chip select */ - mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), - "USBH2_CS"); - gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); - - return 0; -} - -static struct mxc_usbh_platform_data usbh2_pdata = { - .init = usbh2_init, - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, -}; -#endif - -/* - * NOR flash - */ - -static struct physmap_flash_data nor_flash_data = { - .width = 2, -}; - -static struct resource nor_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device physmap_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = &nor_flash_resource, - .num_resources = 1, -}; - - - -/* - * This structure defines the MX31 memory map. - */ -static struct map_desc mx31lite_io_desc[] __initdata = { - { - .virtual = MX31_CS4_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = MX31_CS4_SIZE, - .type = MT_DEVICE - } -}; - -/* - * Set up static virtual mappings. - */ -void __init mx31lite_map_io(void) -{ - mx31_map_io(); - iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); -} - -static int mx31lite_baseboard; -core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); - -static void __init mxc_board_init(void) -{ - int ret; - - switch (mx31lite_baseboard) { - case MX31LITE_NOBOARD: - break; - case MX31LITE_DB: - mx31lite_db_init(); - break; - default: - printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n", - mx31lite_baseboard); - } - - mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), - "mx31lite"); - - /* NOR and NAND flash */ - platform_device_register(&physmap_flash_device); - imx31_add_mxc_nand(&mx31lite_nand_board_info); - - imx31_add_spi_imx1(&spi1_pdata); - spi_register_board_info(&mc13783_spi_dev, 1); - -#if defined(CONFIG_USB_ULPI) - /* USB */ - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - mxc_register_device(&mxc_usbh2, &usbh2_pdata); -#endif - - /* SMSC9117 IRQ pin */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); - if (ret) - pr_warning("could not get LAN irq gpio\n"); - else { - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); - platform_device_register(&smsc911x_device); - } -} - -static void __init mx31lite_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -struct sys_timer mx31lite_timer = { - .init = mx31lite_timer_init, -}; - -MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") - /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31lite_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31lite_timer, -MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c deleted file mode 100644 index eb5f426df22..00000000000 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ /dev/null @@ -1,569 +0,0 @@ -/* - * Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/gfp.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/leds.h> -#include <linux/memory.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/types.h> - -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <mach/board-mx31moboard.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ipu.h> -#include <mach/mmc.h> -#include <mach/mxc_ehci.h> -#include <mach/mx3_camera.h> -#include <mach/spi.h> -#include <mach/ulpi.h> - -#include "devices-imx31.h" -#include "devices.h" - -static unsigned int moboard_pins[] = { - /* UART0 */ - MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, - MX31_PIN_CTS1__GPIO2_7, - /* UART4 */ - MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5, - MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5, - /* I2C0 */ - MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL, - /* I2C1 */ - MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL, - /* SDHC1 */ - MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD, - MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27, - /* USB reset */ - MX31_PIN_GPIO1_0__GPIO1_0, - /* USB OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP, - MX31_PIN_USB_OC__GPIO1_30, - /* USB H2 */ - MX31_PIN_USBH2_DATA0__USBH2_DATA0, - MX31_PIN_USBH2_DATA1__USBH2_DATA1, - MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3, - MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5, - MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7, - MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR, - MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP, - MX31_PIN_SCK6__GPIO1_25, - /* LEDs */ - MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1, - MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3, - /* SPI1 */ - MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO, - MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2, - /* Atlas IRQ */ - MX31_PIN_GPIO1_3__GPIO1_3, - /* SPI2 */ - MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO, - MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS1__CSPI3_SS1, -}; - -static struct physmap_flash_data mx31moboard_flash_data = { - .width = 2, -}; - -static struct resource mx31moboard_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mx31moboard_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mx31moboard_flash_data, - }, - .resource = &mx31moboard_flash_resource, - .num_resources = 1, -}; - -static int moboard_uart0_init(struct platform_device *pdev) -{ - int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack"); - if (ret) - return ret; - - ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0); - if (ret) - gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1)); - - return ret; -} - -static void moboard_uart0_exit(struct platform_device *pdev) -{ - gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1)); -} - -static const struct imxuart_platform_data uart0_pdata __initconst = { - .init = moboard_uart0_init, - .exit = moboard_uart0_exit, -}; - -static const struct imxuart_platform_data uart4_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data moboard_i2c0_data __initconst = { - .bitrate = 400000, -}; - -static const struct imxi2c_platform_data moboard_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static int moboard_spi1_cs[] = { - MXC_SPI_CS(0), - MXC_SPI_CS(2), -}; - -static const struct spi_imx_master moboard_spi1_pdata __initconst = { - .chipselect = moboard_spi1_cs, - .num_chipselect = ARRAY_SIZE(moboard_spi1_cs), -}; - -static struct regulator_consumer_supply sdhc_consumers[] = { - { - .dev = &mxcsdhc_device0.dev, - .supply = "sdhc0_vcc", - }, - { - .dev = &mxcsdhc_device1.dev, - .supply = "sdhc1_vcc", - }, -}; - -static struct regulator_init_data sdhc_vreg_data = { - .constraints = { - .min_uV = 2700000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers), - .consumer_supplies = sdhc_consumers, -}; - -static struct regulator_consumer_supply cam_consumers[] = { - { - .dev = &mx3_camera.dev, - .supply = "cam_vcc", - }, -}; - -static struct regulator_init_data cam_vreg_data = { - .constraints = { - .min_uV = 2700000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(cam_consumers), - .consumer_supplies = cam_consumers, -}; - -static struct mc13783_regulator_init_data moboard_regulators[] = { - { - .id = MC13783_REGU_VMMC1, - .init_data = &sdhc_vreg_data, - }, - { - .id = MC13783_REGU_VCAM, - .init_data = &cam_vreg_data, - }, -}; - -static struct mc13783_led_platform_data moboard_led[] = { - { - .id = MC13783_LED_R1, - .name = "coreboard-led-4:red", - .max_current = 2, - }, - { - .id = MC13783_LED_G1, - .name = "coreboard-led-4:green", - .max_current = 2, - }, - { - .id = MC13783_LED_B1, - .name = "coreboard-led-4:blue", - .max_current = 2, - }, - { - .id = MC13783_LED_R2, - .name = "coreboard-led-5:red", - .max_current = 3, - }, - { - .id = MC13783_LED_G2, - .name = "coreboard-led-5:green", - .max_current = 3, - }, - { - .id = MC13783_LED_B2, - .name = "coreboard-led-5:blue", - .max_current = 3, - }, -}; - -static struct mc13783_leds_platform_data moboard_leds = { - .num_leds = ARRAY_SIZE(moboard_led), - .led = moboard_led, - .flags = MC13783_LED_SLEWLIMTC, - .abmode = MC13783_LED_AB_DISABLED, - .tc1_period = MC13783_LED_PERIOD_10MS, - .tc2_period = MC13783_LED_PERIOD_10MS, -}; - -static struct mc13783_platform_data moboard_pmic = { - .regulators = moboard_regulators, - .num_regulators = ARRAY_SIZE(moboard_regulators), - .leds = &moboard_leds, - .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | - MC13783_USE_ADC | MC13783_USE_LED, -}; - -static struct spi_board_info moboard_spi_board_info[] __initdata = { - { - .modalias = "mc13783", - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), - .max_speed_hz = 300000, - .bus_num = 1, - .chip_select = 0, - .platform_data = &moboard_pmic, - .mode = SPI_CS_HIGH, - }, -}; - -static int moboard_spi2_cs[] = { - MXC_SPI_CS(1), -}; - -static const struct spi_imx_master moboard_spi2_pdata __initconst = { - .chipselect = moboard_spi2_cs, - .num_chipselect = ARRAY_SIZE(moboard_spi2_cs), -}; - -#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) -#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) - -static int moboard_sdhc1_get_ro(struct device *dev) -{ - return !gpio_get_value(SDHC1_WP); -} - -static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(SDHC1_CD, "sdhc-detect"); - if (ret) - return ret; - - gpio_direction_input(SDHC1_CD); - - ret = gpio_request(SDHC1_WP, "sdhc-wp"); - if (ret) - goto err_gpio_free; - gpio_direction_input(SDHC1_WP); - - ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "sdhc1-card-detect", data); - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: - gpio_free(SDHC1_WP); -err_gpio_free: - gpio_free(SDHC1_CD); - - return ret; -} - -static void moboard_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(SDHC1_CD), data); - gpio_free(SDHC1_WP); - gpio_free(SDHC1_CD); -} - -static struct imxmmc_platform_data sdhc1_pdata = { - .get_ro = moboard_sdhc1_get_ro, - .init = moboard_sdhc1_init, - .exit = moboard_sdhc1_exit, -}; - -/* - * this pin is dedicated for all mx31moboard systems, so we do it here - */ -#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0) -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS) - -#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) -#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) - -static void usb_xcvr_reset(void) -{ - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU); - - mxc_iomux_set_gpr(MUX_PGP_UH2, true); - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD); - - gpio_request(OTG_EN_B, "usb-udc-en"); - gpio_direction_output(OTG_EN_B, 0); - gpio_request(USBH2_EN_B, "usbh2-en"); - gpio_direction_output(USBH2_EN_B, 0); - - gpio_request(USB_RESET_B, "usb-reset"); - gpio_direction_output(USB_RESET_B, 0); - mdelay(1); - gpio_set_value(USB_RESET_B, 1); - mdelay(1); -} - -#if defined(CONFIG_USB_ULPI) - -static struct mxc_usbh_platform_data usbh2_pdata = { - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, -}; - -static int __init moboard_usbh2_init(void) -{ - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - return mxc_register_device(&mxc_usbh2, &usbh2_pdata); -} -#else -static inline int moboard_usbh2_init(void) { return 0; } -#endif - - -static struct gpio_led mx31moboard_leds[] = { - { - .name = "coreboard-led-0:red:running", - .default_trigger = "heartbeat", - .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0), - }, { - .name = "coreboard-led-1:red", - .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0), - }, { - .name = "coreboard-led-2:red", - .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0), - }, { - .name = "coreboard-led-3:red", - .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0), - }, -}; - -static struct gpio_led_platform_data mx31moboard_led_pdata = { - .num_leds = ARRAY_SIZE(mx31moboard_leds), - .leds = mx31moboard_leds, -}; - -static struct platform_device mx31moboard_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mx31moboard_led_pdata, - }, -}; - -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - -static struct platform_device *devices[] __initdata = { - &mx31moboard_flash, - &mx31moboard_leds_device, -}; - -static struct mx3_camera_pdata camera_pdata = { - .dma_dev = &mx3_ipu.dev, - .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, - .mclk_10khz = 4800, -}; - -#define CAMERA_BUF_SIZE (4*1024*1024) - -static int __init mx31moboard_cam_alloc_dma(const size_t buf_size) -{ - dma_addr_t dma_handle; - void *buf; - int dma; - - if (buf_size < 2 * 1024 * 1024) - return -EINVAL; - - buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); - if (!buf) { - pr_err("%s: cannot allocate camera buffer-memory\n", __func__); - return -ENOMEM; - } - - memset(buf, 0, buf_size); - - dma = dma_declare_coherent_memory(&mx3_camera.dev, - dma_handle, dma_handle, buf_size, - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); - - /* The way we call dma_declare_coherent_memory only a malloc can fail */ - return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; -} - -static int mx31moboard_baseboard; -core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); - -/* - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), - "moboard"); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx31_add_imx_uart0(&uart0_pdata); - imx31_add_imx_uart4(&uart4_pdata); - - imx31_add_imx_i2c0(&moboard_i2c0_data); - imx31_add_imx_i2c1(&moboard_i2c1_data); - - imx31_add_spi_imx1(&moboard_spi1_pdata); - imx31_add_spi_imx2(&moboard_spi2_pdata); - - gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - spi_register_board_info(moboard_spi_board_info, - ARRAY_SIZE(moboard_spi_board_info)); - - mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata); - - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE)) - mxc_register_device(&mx3_camera, &camera_pdata); - - usb_xcvr_reset(); - - moboard_usbh2_init(); - - switch (mx31moboard_baseboard) { - case MX31NOBOARD: - break; - case MX31DEVBOARD: - mx31moboard_devboard_init(); - break; - case MX31MARXBOT: - mx31moboard_marxbot_init(); - break; - case MX31SMARTBOT: - case MX31EYEBOT: - mx31moboard_smartbot_init(mx31moboard_baseboard); - break; - default: - printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", - mx31moboard_baseboard); - } -} - -static void __init mx31moboard_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -struct sys_timer mx31moboard_timer = { - .init = mx31moboard_timer_init, -}; - -MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") - /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31moboard_timer, -MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c deleted file mode 100644 index b66a75aa2e8..00000000000 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * This machine is known as: - * - i.MX35 3-Stack Development System - * - i.MX35 Platform Development Kit (i.MX35 PDK) - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/fsl_devices.h> - -#include <linux/mtd/physmap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> -#include <mach/irqs.h> -#include <mach/3ds_debugboard.h> -#include <mach/mxc_ehci.h> - -#include "devices-imx35.h" -#include "devices.h" - -#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1) - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct physmap_flash_data mx35pdk_flash_data = { - .width = 2, -}; - -static struct resource mx35pdk_flash_resource = { - .start = MX35_CS0_BASE_ADDR, - .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mx35pdk_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mx35pdk_flash_data, - }, - .resource = &mx35pdk_flash_resource, - .num_resources = 1, -}; - -static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static struct platform_device *devices[] __initdata = { - &mx35pdk_flash, -}; - -static struct pad_desc mx35pdk_pads[] = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* USBOTG */ - MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, - MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, - /* USBH1 */ - MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, - MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, - /* SDCARD */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, -}; - -/* OTG config */ -static struct fsl_usb2_platform_data usb_otg_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -/* USB HOST config */ -static struct mxc_usbh_platform_data usb_host_pdata = { - .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY, -}; - -/* - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); - - imx35_add_fec(NULL); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx35_add_imx_uart0(&uart_pdata); - - mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata); - - mxc_register_device(&mxc_usbh1, &usb_host_pdata); - - imx35_add_mxc_nand(&mx35pdk_nand_board_info); - imx35_add_esdhc(0, NULL); - - if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT)) - pr_warn("Init of the debugboard failed, all " - "devices on the debugboard are unusable.\n"); -} - -static void __init mx35pdk_timer_init(void) -{ - mx35_clocks_init(); -} - -struct sys_timer mx35pdk_timer = { - .init = mx35pdk_timer_init, -}; - -MACHINE_START(MX35_3DS, "Freescale MX35PDK") - /* Maintainer: Freescale Semiconductor, Inc */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &mx35pdk_timer, -MACHINE_END diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c deleted file mode 100644 index 2ff3f661a48..00000000000 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ /dev/null @@ -1,686 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/smsc911x.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/i2c/at24.h> -#include <linux/delay.h> -#include <linux/spi/spi.h> -#include <linux/irq.h> -#include <linux/fsl_devices.h> -#include <linux/can/platform/sja1000.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/gfp.h> - -#include <media/soc_camera.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ipu.h> -#include <mach/mmc.h> -#include <mach/mx3_camera.h> -#include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> -#include <mach/ulpi.h> - -#include "devices-imx31.h" -#include "devices.h" -#include "pcm037.h" - -static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; - -static int __init pcm037_variant_setup(char *str) -{ - if (!strcmp("eet", str)) - pcm037_instance = PCM037_EET; - else if (strcmp("pcm970", str)) - pr_warning("Unknown pcm037 baseboard variant %s\n", str); - - return 1; -} - -/* Supported values: "pcm970" (default) and "eet" */ -__setup("pcm037_variant=", pcm037_variant_setup); - -enum pcm037_board_variant pcm037_variant(void) -{ - return pcm037_instance; -} - -/* UART1 with RTS/CTS handshake signals */ -static unsigned int pcm037_uart1_handshake_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, -}; - -/* UART1 without RTS/CTS handshake signals */ -static unsigned int pcm037_uart1_pins[] = { - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, -}; - -static unsigned int pcm037_pins[] = { - /* I2C */ - MX31_PIN_CSPI2_MOSI__SCL, - MX31_PIN_CSPI2_MISO__SDA, - MX31_PIN_CSPI2_SS2__I2C3_SDA, - MX31_PIN_CSPI2_SCLK__I2C3_SCL, - /* SDHC1 */ - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, - IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */ - IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */ - /* SPI1 */ - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, - /* UART2 */ - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - /* UART3 */ - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3, - MX31_PIN_CSPI3_SCLK__RTS3, - MX31_PIN_CSPI3_SPI_RDY__CTS3, - /* LAN9217 irq pin */ - IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), - /* Onewire */ - MX31_PIN_BATT_LINE__OWIRE, - /* Framebuffer */ - MX31_PIN_LD0__LD0, - MX31_PIN_LD1__LD1, - MX31_PIN_LD2__LD2, - MX31_PIN_LD3__LD3, - MX31_PIN_LD4__LD4, - MX31_PIN_LD5__LD5, - MX31_PIN_LD6__LD6, - MX31_PIN_LD7__LD7, - MX31_PIN_LD8__LD8, - MX31_PIN_LD9__LD9, - MX31_PIN_LD10__LD10, - MX31_PIN_LD11__LD11, - MX31_PIN_LD12__LD12, - MX31_PIN_LD13__LD13, - MX31_PIN_LD14__LD14, - MX31_PIN_LD15__LD15, - MX31_PIN_LD16__LD16, - MX31_PIN_LD17__LD17, - MX31_PIN_VSYNC3__VSYNC3, - MX31_PIN_HSYNC__HSYNC, - MX31_PIN_FPSHIFT__FPSHIFT, - MX31_PIN_DRDY0__DRDY0, - MX31_PIN_D3_REV__D3_REV, - MX31_PIN_CONTRAST__CONTRAST, - MX31_PIN_D3_SPL__D3_SPL, - MX31_PIN_D3_CLS__D3_CLS, - MX31_PIN_LCS0__GPI03_23, - /* CSI */ - IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), - MX31_PIN_CSI_D6__CSI_D6, - MX31_PIN_CSI_D7__CSI_D7, - MX31_PIN_CSI_D8__CSI_D8, - MX31_PIN_CSI_D9__CSI_D9, - MX31_PIN_CSI_D10__CSI_D10, - MX31_PIN_CSI_D11__CSI_D11, - MX31_PIN_CSI_D12__CSI_D12, - MX31_PIN_CSI_D13__CSI_D13, - MX31_PIN_CSI_D14__CSI_D14, - MX31_PIN_CSI_D15__CSI_D15, - MX31_PIN_CSI_HSYNC__CSI_HSYNC, - MX31_PIN_CSI_MCLK__CSI_MCLK, - MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, - MX31_PIN_CSI_VSYNC__CSI_VSYNC, - /* GPIO */ - IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO), - /* OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - /* USB host 2 */ - IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), -}; - -static struct physmap_flash_data pcm037_flash_data = { - .width = 2, -}; - -static struct resource pcm037_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm037_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm037_flash_data, - }, - .resource = &pcm037_flash_resource, - .num_resources = 1, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct resource smsc911x_resources[] = { - { - .start = MX31_CS1_BASE_ADDR + 0x300, - .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY | - SMSC911X_SAVE_MAC_ADDRESS, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device pcm037_eth = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_info, - }, -}; - -static struct platdata_mtd_ram pcm038_sram_data = { - .bankwidth = 2, -}; - -static struct resource pcm038_sram_resource = { - .start = MX31_CS4_BASE_ADDR, - .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm037_sram_device = { - .name = "mtd-ram", - .id = 0, - .dev = { - .platform_data = &pcm038_sram_data, - }, - .num_resources = 1, - .resource = &pcm038_sram_resource, -}; - -static const struct mxc_nand_platform_data -pcm037_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = { - .bitrate = 100000, -}; - -static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = { - .bitrate = 20000, -}; - -static struct at24_platform_data board_eeprom = { - .byte_len = 4096, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static int pcm037_camera_power(struct device *dev, int on) -{ - /* disable or enable the camera in X7 or X8 PCM970 connector */ - gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on); - return 0; -} - -static struct i2c_board_info pcm037_i2c_camera[] = { - { - I2C_BOARD_INFO("mt9t031", 0x5d), - }, { - I2C_BOARD_INFO("mt9v022", 0x48), - }, -}; - -static struct soc_camera_link iclink_mt9v022 = { - .bus_id = 0, /* Must match with the camera ID */ - .board_info = &pcm037_i2c_camera[1], - .i2c_adapter_id = 2, -}; - -static struct soc_camera_link iclink_mt9t031 = { - .bus_id = 0, /* Must match with the camera ID */ - .power = pcm037_camera_power, - .board_info = &pcm037_i2c_camera[0], - .i2c_adapter_id = 2, -}; - -static struct i2c_board_info pcm037_i2c_devices[] = { - { - I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ - .platform_data = &board_eeprom, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - } -}; - -static struct platform_device pcm037_mt9t031 = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &iclink_mt9t031, - }, -}; - -static struct platform_device pcm037_mt9v022 = { - .name = "soc-camera-pdrv", - .id = 1, - .dev = { - .platform_data = &iclink_mt9v022, - }, -}; - -/* Not connected by default */ -#ifdef PCM970_SDHC_RW_SWITCH -static int pcm970_sdhc1_get_ro(struct device *dev) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6)); -} -#endif - -#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6) -#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6) - -static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect"); - if (ret) - return ret; - - gpio_direction_input(SDHC1_GPIO_DET); - -#ifdef PCM970_SDHC_RW_SWITCH - ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp"); - if (ret) - goto err_gpio_free; - gpio_direction_input(SDHC1_GPIO_WP); -#endif - - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "sdhc-detect", data); - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: -#ifdef PCM970_SDHC_RW_SWITCH - gpio_free(SDHC1_GPIO_WP); -err_gpio_free: -#endif - gpio_free(SDHC1_GPIO_DET); - - return ret; -} - -static void pcm970_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data); - gpio_free(SDHC1_GPIO_DET); - gpio_free(SDHC1_GPIO_WP); -} - -static struct imxmmc_platform_data sdhc_pdata = { -#ifdef PCM970_SDHC_RW_SWITCH - .get_ro = pcm970_sdhc1_get_ro, -#endif - .init = pcm970_sdhc1_init, - .exit = pcm970_sdhc1_exit, -}; - -struct mx3_camera_pdata camera_pdata = { - .dma_dev = &mx3_ipu.dev, - .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10, - .mclk_10khz = 2000, -}; - -static int __init pcm037_camera_alloc_dma(const size_t buf_size) -{ - dma_addr_t dma_handle; - void *buf; - int dma; - - if (buf_size < 2 * 1024 * 1024) - return -EINVAL; - - buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL); - if (!buf) { - pr_err("%s: cannot allocate camera buffer-memory\n", __func__); - return -ENOMEM; - } - - memset(buf, 0, buf_size); - - dma = dma_declare_coherent_memory(&mx3_camera.dev, - dma_handle, dma_handle, buf_size, - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); - - /* The way we call dma_declare_coherent_memory only a malloc can fail */ - return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM; -} - -static struct platform_device *devices[] __initdata = { - &pcm037_flash, - &pcm037_sram_device, - &imx_wdt_device0, - &pcm037_mt9t031, - &pcm037_mt9v022, -}; - -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - -static const struct fb_videomode fb_modedb[] = { - { - /* 240x320 @ 60 Hz Sharp */ - .name = "Sharp-LQ035Q7DH06-QVGA", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | - FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x320 @ 60 Hz */ - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x320 @ 60 Hz */ - .name = "CMEL-OLED", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, - .name = "Sharp-LQ035Q7DH06-QVGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct resource pcm970_sja1000_resources[] = { - { - .start = MX31_CS5_BASE_ADDR, - .end = MX31_CS5_BASE_ADDR + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), - .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -struct sja1000_platform_data pcm970_sja1000_platform_data = { - .osc_freq = 16000000, - .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, - .cdr = CDR_CBP, -}; - -static struct platform_device pcm970_sja1000 = { - .name = "sja1000_platform", - .dev = { - .platform_data = &pcm970_sja1000_platform_data, - }, - .resource = pcm970_sja1000_resources, - .num_resources = ARRAY_SIZE(pcm970_sja1000_resources), -}; - -#if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_pdata = { - .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, -}; - -static struct mxc_usbh_platform_data usbh2_pdata = { - .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, -}; -#endif - -static struct fsl_usb2_platform_data otg_device_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static int otg_mode_host; - -static int __init pcm037_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = 1; - else if (!strcmp(options, "device")) - otg_mode_host = 0; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 0; -} -__setup("otg_mode=", pcm037_otg_mode); - -/* - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - int ret; - - mxc_iomux_set_gpr(MUX_PGP_UH2, 1); - - mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), - "pcm037"); - -#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \ - | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */ - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */ - mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */ - mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */ - mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */ - mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */ - mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */ - mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */ - - if (pcm037_variant() == PCM037_EET) - mxc_iomux_setup_multiple_pins(pcm037_uart1_pins, - ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1"); - else - mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins, - ARRAY_SIZE(pcm037_uart1_handshake_pins), - "pcm037_uart1"); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx31_add_imx_uart0(&uart_pdata); - /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ - imx31_add_imx_uart1(&uart_pdata); - imx31_add_imx_uart2(&uart_pdata); - - mxc_register_device(&mxc_w1_master_device, NULL); - - /* LAN9217 IRQ pin */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); - if (ret) - pr_warning("could not get LAN irq gpio\n"); - else { - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - platform_device_register(&pcm037_eth); - } - - - /* I2C adapters and devices */ - i2c_register_board_info(1, pcm037_i2c_devices, - ARRAY_SIZE(pcm037_i2c_devices)); - - imx31_add_imx_i2c1(&pcm037_i2c1_data); - imx31_add_imx_i2c2(&pcm037_i2c2_data); - - imx31_add_mxc_nand(&pcm037_nand_board_info); - mxc_register_device(&mxcsdhc_device0, &sdhc_pdata); - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); - - /* CSI */ - /* Camera power: default - off */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); - if (!ret) - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); - else - iclink_mt9t031.power = NULL; - - if (!pcm037_camera_alloc_dma(4 * 1024 * 1024)) - mxc_register_device(&mx3_camera, &camera_pdata); - - platform_device_register(&pcm970_sja1000); - -#if defined(CONFIG_USB_ULPI) - if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - mxc_register_device(&mxc_otg_host, &otg_pdata); - } - - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - mxc_register_device(&mxc_usbh2, &usbh2_pdata); -#endif - if (!otg_mode_host) - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); - -} - -static void __init pcm037_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -struct sys_timer pcm037_timer = { - .init = pcm037_timer_init, -}; - -MACHINE_START(PCM037, "Phytec Phycore pcm037") - /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &pcm037_timer, -MACHINE_END diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c deleted file mode 100644 index 99e0894e07d..00000000000 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Copyright (C) 2009 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> - -#include <mach/common.h> -#include <mach/iomux-mx3.h> - -#include <asm/mach-types.h> - -#include "pcm037.h" -#include "devices.h" -#include "devices-imx31.h" - -static unsigned int pcm037_eet_pins[] = { - /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ - IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), - /* GPIO keys */ - IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */ - IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */ - IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */ - IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */ - IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */ - IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */ - IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */ - IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */ - IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */ - IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */ - IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */ - IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */ - IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */ - IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */ - - /* LEDs */ - IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */ - IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */ - IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */ - IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */ -}; - -/* SPI */ -static struct spi_board_info pcm037_spi_dev[] = { - { - .modalias = "dac124s085", - .max_speed_hz = 400000, - .bus_num = 0, - .chip_select = 0, /* Index in pcm037_spi1_cs[] */ - .mode = SPI_CPHA, - }, -}; - -/* Platform Data for MXC CSPI */ -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) -static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; - -static const struct spi_imx_master pcm037_spi1_pdata __initconst = { - .chipselect = pcm037_spi1_cs, - .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), -}; -#endif - -/* GPIO-keys input device */ -static struct gpio_keys_button pcm037_gpio_keys[] = { - { - .type = EV_KEY, - .code = KEY_L, - .gpio = 0, - .desc = "Wheel Manual", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_A, - .gpio = 1, - .desc = "Wheel AF", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_V, - .gpio = 2, - .desc = "Wheel View", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_M, - .gpio = 3, - .desc = "Wheel Menu", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_UP, - .gpio = 32, - .desc = "Nav Pad Up", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_RIGHT, - .gpio = 33, - .desc = "Nav Pad Right", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_DOWN, - .gpio = 34, - .desc = "Nav Pad Down", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_LEFT, - .gpio = 35, - .desc = "Nav Pad Left", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_ENTER, - .gpio = 38, - .desc = "Nav Pad Ok", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = KEY_O, - .gpio = 39, - .desc = "Wheel Off", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = BTN_FORWARD, - .gpio = 50, - .desc = "Focus Forward", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = BTN_BACK, - .gpio = 51, - .desc = "Focus Backward", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = BTN_MIDDLE, - .gpio = 52, - .desc = "Release Half", - .wakeup = 0, - }, { - .type = EV_KEY, - .code = BTN_EXTRA, - .gpio = 53, - .desc = "Release Full", - .wakeup = 0, - }, -}; - -static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = { - .buttons = pcm037_gpio_keys, - .nbuttons = ARRAY_SIZE(pcm037_gpio_keys), - .rep = 0, /* No auto-repeat */ -}; - -static struct platform_device pcm037_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &pcm037_gpio_keys_platform_data, - }, -}; - -static int eet_init_devices(void) -{ - if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET) - return 0; - - mxc_iomux_setup_multiple_pins(pcm037_eet_pins, - ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet"); - - /* SPI */ - spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) - imx31_add_spi_imx0(&pcm037_spi1_pdata); -#endif - - platform_device_register(&pcm037_gpio_keys_device); - - return 0; -} - -late_initcall(eet_init_devices); diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c deleted file mode 100644 index 4e1de87995d..00000000000 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ /dev/null @@ -1,418 +0,0 @@ -/* - * Copyright (C) 2009 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/smc911x.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/i2c/at24.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> -#include <mach/mxc_ehci.h> -#include <mach/ulpi.h> -#include <mach/audmux.h> - -#include "devices-imx35.h" -#include "devices.h" - -static const struct fb_videomode fb_modedb[] = { - { - /* 240x320 @ 60 Hz */ - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x320 @ 60 Hz */ - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, - .name = "Sharp-LQ035Q7", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct physmap_flash_data pcm043_flash_data = { - .width = 2, -}; - -static struct resource pcm043_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm043_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm043_flash_data, - }, - .resource = &pcm043_flash_resource, - .num_resources = 1, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE -static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { - .bitrate = 50000, -}; - -static struct at24_platform_data board_eeprom = { - .byte_len = 4096, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info pcm043_i2c_devices[] = { - { - I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ - .platform_data = &board_eeprom, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - } -}; -#endif - -static struct platform_device *devices[] __initdata = { - &pcm043_flash, - &imx_wdt_device0, -}; - -static struct pad_desc pcm043_pads[] = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* UART2 */ - MX35_PAD_CTS2__UART2_CTS, - MX35_PAD_RTS2__UART2_RTS, - MX35_PAD_TXD2__UART2_TXD_MUX, - MX35_PAD_RXD2__UART2_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* Display */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - MX35_PAD_D3_REV__IPU_DISPB_D3_REV, - MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, - /* gpio */ - MX35_PAD_ATA_CS0__GPIO2_6, - /* USB host */ - MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, - MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, - /* SSI */ - MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, - MX35_PAD_STXD4__AUDMUX_AUD4_TXD, - MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, - MX35_PAD_SCK4__AUDMUX_AUD4_TXC, - /* CAN2 */ - MX35_PAD_TX5_RX0__CAN2_TXCAN, - MX35_PAD_TX4_RX1__CAN2_RXCAN, - /* esdhc */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, -}; - -#define AC97_GPIO_TXFS (1 * 32 + 31) -#define AC97_GPIO_TXD (1 * 32 + 28) -#define AC97_GPIO_RESET (1 * 32 + 0) - -static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) -{ - struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; - struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; - int ret; - - ret = gpio_request(AC97_GPIO_TXFS, "SSI"); - if (ret) { - printk("failed to get GPIO_TXFS: %d\n", ret); - return; - } - - mxc_iomux_v3_setup_pad(&txfs_gpio); - - /* warm reset */ - gpio_direction_output(AC97_GPIO_TXFS, 1); - udelay(2); - gpio_set_value(AC97_GPIO_TXFS, 0); - - gpio_free(AC97_GPIO_TXFS); - mxc_iomux_v3_setup_pad(&txfs); -} - -static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) -{ - struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31; - struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS; - struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28; - struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD; - struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0; - int ret; - - ret = gpio_request(AC97_GPIO_TXFS, "SSI"); - if (ret) - goto err1; - - ret = gpio_request(AC97_GPIO_TXD, "SSI"); - if (ret) - goto err2; - - ret = gpio_request(AC97_GPIO_RESET, "SSI"); - if (ret) - goto err3; - - mxc_iomux_v3_setup_pad(&txfs_gpio); - mxc_iomux_v3_setup_pad(&txd_gpio); - mxc_iomux_v3_setup_pad(&reset_gpio); - - gpio_direction_output(AC97_GPIO_TXFS, 0); - gpio_direction_output(AC97_GPIO_TXD, 0); - - /* cold reset */ - gpio_direction_output(AC97_GPIO_RESET, 0); - udelay(10); - gpio_direction_output(AC97_GPIO_RESET, 1); - - mxc_iomux_v3_setup_pad(&txd); - mxc_iomux_v3_setup_pad(&txfs); - - gpio_free(AC97_GPIO_RESET); -err3: - gpio_free(AC97_GPIO_TXD); -err2: - gpio_free(AC97_GPIO_TXFS); -err1: - if (ret) - printk("%s failed with %d\n", __func__, ret); - mdelay(1); -} - -static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = { - .ac97_reset = pcm043_ac97_cold_reset, - .ac97_warm_reset = pcm043_ac97_warm_reset, - .flags = IMX_SSI_USE_AC97, -}; - -static const struct mxc_nand_platform_data -pcm037_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -}; - -#if defined(CONFIG_USB_ULPI) -static struct mxc_usbh_platform_data otg_pdata = { - .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, -}; - -static struct mxc_usbh_platform_data usbh1_pdata = { - .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, -}; -#endif - -static struct fsl_usb2_platform_data otg_device_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, -}; - -static int otg_mode_host; - -static int __init pcm043_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = 1; - else if (!strcmp(options, "device")) - otg_mode_host = 0; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 0; -} -__setup("otg_mode=", pcm043_otg_mode); - -/* - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); - - mxc_audmux_v2_configure_port(3, - MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V2_PTCR_TFSEL(0) | - MXC_AUDMUX_V2_PTCR_TFSDIR, - MXC_AUDMUX_V2_PDCR_RXDSEL(0)); - - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V2_PTCR_TCSEL(3) | - MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ - MXC_AUDMUX_V2_PDCR_RXDSEL(3)); - - imx35_add_fec(NULL); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx35_add_imx_uart0(&uart_pdata); - imx35_add_mxc_nand(&pcm037_nand_board_info); - imx35_add_imx_ssi(0, &pcm043_ssi_pdata); - - imx35_add_imx_uart1(&uart_pdata); - -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE - i2c_register_board_info(0, pcm043_i2c_devices, - ARRAY_SIZE(pcm043_i2c_devices)); - - imx35_add_imx_i2c0(&pcm043_i2c0_data); -#endif - - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); - -#if defined(CONFIG_USB_ULPI) - if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - mxc_register_device(&mxc_otg_host, &otg_pdata); - } - - mxc_register_device(&mxc_usbh1, &usbh1_pdata); -#endif - if (!otg_mode_host) - mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); - - imx35_add_flexcan1(NULL); - imx35_add_esdhc(0, NULL); -} - -static void __init pcm043_timer_init(void) -{ - mx35_clocks_init(); -} - -struct sys_timer pcm043_timer = { - .init = pcm043_timer_init, -}; - -MACHINE_START(PCM043, "Phytec Phycore pcm043") - /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &pcm043_timer, -MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c deleted file mode 100644 index fd1050c4096..00000000000 --- a/arch/arm/mach-mx3/mach-qong.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/memory.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand.h> -#include <linux/gpio.h> - -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> -#include <mach/common.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <mach/iomux-mx3.h> - -#include "devices-imx31.h" -#include "devices.h" - -/* FPGA defines */ -#define QONG_FPGA_VERSION(major, minor, rev) \ - (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF)) - -#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR -#define QONG_FPGA_PERIPH_SIZE (1 << 24) - -#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR -#define QONG_FPGA_CTRL_SIZE 0x10 -/* FPGA control registers */ -#define QONG_FPGA_CTRL_VERSION 0x00 - -#define QONG_DNET_ID 1 -#define QONG_DNET_BASEADDR \ - (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE) -#define QONG_DNET_SIZE 0x00001000 - -#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1) - -/* - * This file contains the board-specific initialization routines. - */ - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static int uart_pins[] = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1 -}; - -static inline void __init mxc_init_imx_uart(void) -{ - mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), - "uart-0"); - imx31_add_imx_uart0(&uart_pdata); -} - -static struct resource dnet_resources[] = { - { - .name = "dnet-memory", - .start = QONG_DNET_BASEADDR, - .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = QONG_FPGA_IRQ, - .end = QONG_FPGA_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dnet_device = { - .name = "dnet", - .id = -1, - .num_resources = ARRAY_SIZE(dnet_resources), - .resource = dnet_resources, -}; - -static int __init qong_init_dnet(void) -{ - int ret; - - ret = platform_device_register(&dnet_device); - return ret; -} - -/* MTD NOR flash */ - -static struct physmap_flash_data qong_flash_data = { - .width = 2, -}; - -static struct resource qong_flash_resource = { - .start = MX31_CS0_BASE_ADDR, - .end = MX31_CS0_BASE_ADDR + SZ_128M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device qong_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &qong_flash_data, - }, - .resource = &qong_flash_resource, - .num_resources = 1, -}; - -static void qong_init_nor_mtd(void) -{ - (void)platform_device_register(&qong_nor_mtd_device); -} - -/* - * Hardware specific access to control-lines - */ -static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *nand_chip = mtd->priv; - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24)); - else - writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23)); -} - -/* - * Read the Device Ready pin. - */ -static int qong_nand_device_ready(struct mtd_info *mtd) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB)); -} - -static void qong_nand_select_chip(struct mtd_info *mtd, int chip) -{ - if (chip >= 0) - gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); - else - gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1); -} - -static struct platform_nand_data qong_nand_data = { - .chip = { - .nr_chips = 1, - .chip_delay = 20, - .options = 0, - }, - .ctrl = { - .cmd_ctrl = qong_nand_cmd_ctrl, - .dev_ready = qong_nand_device_ready, - .select_chip = qong_nand_select_chip, - } -}; - -static struct resource qong_nand_resource = { - .start = MX31_CS3_BASE_ADDR, - .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device qong_nand_device = { - .name = "gen_nand", - .id = -1, - .dev = { - .platform_data = &qong_nand_data, - }, - .num_resources = 1, - .resource = &qong_nand_resource, -}; - -static void __init qong_init_nand_mtd(void) -{ - /* init CS */ - mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800); - mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); - - /* enable pin */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO)); - if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable")) - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0); - - /* ready/busy pin */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO)); - if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy")) - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB)); - - /* write protect pin */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO)); - if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp")) - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B)); - - platform_device_register(&qong_nand_device); -} - -static void __init qong_init_fpga(void) -{ - void __iomem *regs; - u32 fpga_ver; - - regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE); - if (!regs) { - printk(KERN_ERR "%s: failed to map registers, aborting.\n", - __func__); - return; - } - - fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION); - iounmap(regs); - printk(KERN_INFO "Qong FPGA version %d.%d.%d\n", - (fpga_ver & 0xF000) >> 12, - (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF); - if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) { - printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based " - "devices won't be registered!\n"); - return; - } - - /* register FPGA-based devices */ - qong_init_nand_mtd(); - qong_init_dnet(); -} - -/* - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - mxc_init_imx_uart(); - qong_init_nor_mtd(); - qong_init_fpga(); -} - -static void __init qong_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -static struct sys_timer qong_timer = { - .init = qong_timer_init, -}; - -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_QONG data structure. - */ - -MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") - /* Maintainer: DENX Software Engineering GmbH */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &qong_timer, -MACHINE_END diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c deleted file mode 100644 index b4ffc531a82..00000000000 --- a/arch/arm/mach-mx3/mm.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/err.h> - -#include <asm/pgtable.h> -#include <asm/mach/map.h> -#include <asm/hardware/cache-l2x0.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-v3.h> - -/*! - * @file mm.c - * - * @brief This file creates static virtual to physical mappings, common to all MX3 boards. - * - * @ingroup Memory - */ - -/*! - * This table defines static virtual address mappings for I/O regions. - * These are the mappings common across all MX3 boards. - */ -static struct map_desc mxc_io_desc[] __initdata = { - { - .virtual = X_MEMC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR), - .length = X_MEMC_SIZE, - .type = MT_DEVICE - }, { - .virtual = AVIC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AVIC_BASE_ADDR), - .length = AVIC_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = SPBA0_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), - .length = SPBA0_SIZE, - .type = MT_DEVICE_NONSHARED - }, -}; - -/*! - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx31_map_io(void) -{ - mxc_set_cpu_type(MXC_CPU_MX31); - mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); - - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); -} - -#ifdef CONFIG_ARCH_MX35 -void __init mx35_map_io(void) -{ - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR)); - - iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); -} -#endif - -int imx3x_register_gpios(void); - -void __init mx31_init_irq(void) -{ - mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR)); - imx3x_register_gpios(); -} - -void __init mx35_init_irq(void) -{ - mx31_init_irq(); -} - -#ifdef CONFIG_CACHE_L2X0 -static int mxc_init_l2x0(void) -{ - void __iomem *l2x0_base; - void __iomem *clkctl_base; -/* - * First of all, we must repair broken chip settings. There are some - * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These - * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. - * Workaraound is to setup the correct register setting prior enabling the - * L2 cache. This should not hurt already working CPUs, as they are using the - * same value - */ -#define L2_MEM_VAL 0x10 - - clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); - if (clkctl_base != NULL) { - writel(0x00000515, clkctl_base + L2_MEM_VAL); - iounmap(clkctl_base); - } else { - pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); - } - - l2x0_base = ioremap(L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); - return 0; - } - - l2x0_init(l2x0_base, 0x00030024, 0x00000000); - - return 0; -} - -arch_initcall(mxc_init_l2x0); -#endif - diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c deleted file mode 100644 index 827fd3c8020..00000000000 --- a/arch/arm/mach-mx3/mx31lilly-db.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * LILLY-1131 development board support - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * based on code for other MX31 boards, - * - * Copyright 2005-2007 Freescale Semiconductor - * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lilly.h> -#include <mach/mmc.h> -#include <mach/mx3fb.h> -#include <mach/ipu.h> - -#include "devices-imx31.h" -#include "devices.h" - -/* - * This file contains board-specific initialization routines for the - * LILLY-1131 development board. If you design an own baseboard for the - * module, use this file as base for support code. - */ - -static unsigned int lilly_db_board_pins[] __initdata = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3, - MX31_PIN_CSPI3_SCLK__RTS3, - MX31_PIN_CSPI3_SPI_RDY__CTS3, - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, - MX31_PIN_LD0__LD0, - MX31_PIN_LD1__LD1, - MX31_PIN_LD2__LD2, - MX31_PIN_LD3__LD3, - MX31_PIN_LD4__LD4, - MX31_PIN_LD5__LD5, - MX31_PIN_LD6__LD6, - MX31_PIN_LD7__LD7, - MX31_PIN_LD8__LD8, - MX31_PIN_LD9__LD9, - MX31_PIN_LD10__LD10, - MX31_PIN_LD11__LD11, - MX31_PIN_LD12__LD12, - MX31_PIN_LD13__LD13, - MX31_PIN_LD14__LD14, - MX31_PIN_LD15__LD15, - MX31_PIN_LD16__LD16, - MX31_PIN_LD17__LD17, - MX31_PIN_VSYNC3__VSYNC3, - MX31_PIN_HSYNC__HSYNC, - MX31_PIN_FPSHIFT__FPSHIFT, - MX31_PIN_DRDY0__DRDY0, - MX31_PIN_CONTRAST__CONTRAST, -}; - -/* UART */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* MMC support */ - -static int mxc_mmc1_get_ro(struct device *dev) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0)); -} - -static int gpio_det, gpio_wp; - -#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int mxc_mmc1_init(struct device *dev, - irq_handler_t detect_irq, void *data) -{ - int ret; - - gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1); - gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0); - - mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG); - - ret = gpio_request(gpio_det, "MMC detect"); - if (ret) - return ret; - - ret = gpio_request(gpio_wp, "MMC w/p"); - if (ret) - goto exit_free_det; - - gpio_direction_input(gpio_det); - gpio_direction_input(gpio_wp); - - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "MMC detect", data); - if (ret) - goto exit_free_wp; - - return 0; - -exit_free_wp: - gpio_free(gpio_wp); - -exit_free_det: - gpio_free(gpio_det); - - return ret; -} - -static void mxc_mmc1_exit(struct device *dev, void *data) -{ - gpio_free(gpio_det); - gpio_free(gpio_wp); - free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); -} - -static struct imxmmc_platform_data mmc_pdata = { - .get_ro = mxc_mmc1_get_ro, - .init = mxc_mmc1_init, - .exit = mxc_mmc1_exit, -}; - -/* Framebuffer support */ -static struct ipu_platform_data ipu_data __initdata = { - .irq_base = MXC_IPU_IRQ_START, -}; - -static const struct fb_videomode fb_modedb = { - /* 640x480 TFT panel (IPS-056T) */ - .name = "CRT-VGA", - .refresh = 64, - .xres = 640, - .yres = 480, - .pixclock = 30000, - .left_margin = 200, - .right_margin = 2, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 3, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, -}; - -static struct mx3fb_platform_data fb_pdata __initdata = { - .dma_dev = &mx3_ipu.dev, - .name = "CRT-VGA", - .mode = &fb_modedb, - .num_modes = 1, -}; - -#define LCD_VCC_EN_GPIO (7) - -static void __init mx31lilly_init_fb(void) -{ - if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) { - printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n"); - return; - } - - mxc_register_device(&mx3_ipu, &ipu_data); - mxc_register_device(&mx3_fb, &fb_pdata); - gpio_direction_output(LCD_VCC_EN_GPIO, 1); -} - -void __init mx31lilly_db_init(void) -{ - mxc_iomux_setup_multiple_pins(lilly_db_board_pins, - ARRAY_SIZE(lilly_db_board_pins), - "development board pins"); - imx31_add_imx_uart0(&uart_pdata); - imx31_add_imx_uart1(&uart_pdata); - imx31_add_imx_uart2(&uart_pdata); - mxc_register_device(&mxcsdhc_device0, &mmc_pdata); - mx31lilly_init_fb(); -} - diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c deleted file mode 100644 index 7b0e74e275b..00000000000 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * LogicPD i.MX31 SOM-LV development board support - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * based on code for other MX31 boards, - * - * Copyright 2005-2007 Freescale Semiconductor - * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lite.h> -#include <mach/mmc.h> - -#include "devices-imx31.h" -#include "devices.h" - -/* - * This file contains board-specific initialization routines for the - * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'. - * If you design an own baseboard for the module, use this file as base - * for support code. - */ - -static unsigned int litekit_db_board_pins[] __initdata = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - /* SPI 0 */ - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, - /* SDHC1 */ - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, -}; - -/* UART */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* MMC */ - -static int gpio_det, gpio_wp; - -#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS) - -static int mxc_mmc1_get_ro(struct device *dev) -{ - return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6)); -} - -static int mxc_mmc1_init(struct device *dev, - irq_handler_t detect_irq, void *data) -{ - int ret; - - gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1); - gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6); - - mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_CMD, - MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG); - - ret = gpio_request(gpio_det, "MMC detect"); - if (ret) - return ret; - - ret = gpio_request(gpio_wp, "MMC w/p"); - if (ret) - goto exit_free_det; - - gpio_direction_input(gpio_det); - gpio_direction_input(gpio_wp); - - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "MMC detect", data); - if (ret) - goto exit_free_wp; - - return 0; - -exit_free_wp: - gpio_free(gpio_wp); - -exit_free_det: - gpio_free(gpio_det); - - return ret; -} - -static void mxc_mmc1_exit(struct device *dev, void *data) -{ - gpio_free(gpio_det); - gpio_free(gpio_wp); - free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data); -} - -static struct imxmmc_platform_data mmc_pdata = { - .get_ro = mxc_mmc1_get_ro, - .init = mxc_mmc1_init, - .exit = mxc_mmc1_exit, -}; - -/* SPI */ - -static int spi_internal_chipselect[] = { - MXC_SPI_CS(0), - MXC_SPI_CS(1), - MXC_SPI_CS(2), -}; - -static const struct spi_imx_master spi0_pdata __initconst = { - .chipselect = spi_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), -}; - -/* GPIO LEDs */ - -static struct gpio_led litekit_leds[] = { - { - .name = "GPIO0", - .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE), - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "GPIO1", - .gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE), - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - } -}; - -static struct gpio_led_platform_data litekit_led_platform_data = { - .leds = litekit_leds, - .num_leds = ARRAY_SIZE(litekit_leds), -}; - -static struct platform_device litekit_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &litekit_led_platform_data, - }, -}; - -void __init mx31lite_db_init(void) -{ - mxc_iomux_setup_multiple_pins(litekit_db_board_pins, - ARRAY_SIZE(litekit_db_board_pins), - "development board pins"); - imx31_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxcsdhc_device0, &mmc_pdata); - imx31_add_spi_imx0(&spi0_pdata); - platform_device_register(&litekit_led_device); - mxc_register_device(&imx_wdt_device0, NULL); - mxc_register_device(&imx_rtc_device0, NULL); -} - diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c deleted file mode 100644 index fc395a7a859..00000000000 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/fsl_devices.h> - -#include <linux/usb/otg.h> - -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/hardware.h> -#include <mach/mmc.h> -#include <mach/mxc_ehci.h> -#include <mach/ulpi.h> - -#include "devices-imx31.h" -#include "devices.h" - -static unsigned int devboard_pins[] = { - /* UART1 */ - MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, - /* SDHC2 */ - MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, - MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, - MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, - MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, - /* USB H1 */ - MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, - MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, - MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, - MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, - MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, - /* SEL */ - MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, - MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) -#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) - -static int devboard_sdhc2_get_ro(struct device *dev) -{ - return !gpio_get_value(SDHC2_WP); -} - -static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(SDHC2_CD, "sdhc-detect"); - if (ret) - return ret; - - gpio_direction_input(SDHC2_CD); - - ret = gpio_request(SDHC2_WP, "sdhc-wp"); - if (ret) - goto err_gpio_free; - gpio_direction_input(SDHC2_WP); - - ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "sdhc2-card-detect", data); - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: - gpio_free(SDHC2_WP); -err_gpio_free: - gpio_free(SDHC2_CD); - - return ret; -} - -static void devboard_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(SDHC2_CD), data); - gpio_free(SDHC2_WP); - gpio_free(SDHC2_CD); -} - -static struct imxmmc_platform_data sdhc2_pdata = { - .get_ro = devboard_sdhc2_get_ro, - .init = devboard_sdhc2_init, - .exit = devboard_sdhc2_exit, -}; - -#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) -#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) -#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) - -static void devboard_init_sel_gpios(void) -{ - if (!gpio_request(SEL0, "sel0")) { - gpio_direction_input(SEL0); - gpio_export(SEL0, true); - } - - if (!gpio_request(SEL1, "sel1")) { - gpio_direction_input(SEL1); - gpio_export(SEL1, true); - } - - if (!gpio_request(SEL2, "sel2")) { - gpio_direction_input(SEL2); - gpio_export(SEL2, true); - } - - if (!gpio_request(SEL3, "sel3")) { - gpio_direction_input(SEL3); - gpio_export(SEL3, true); - } -} -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int devboard_usbh1_hw_init(struct platform_device *pdev) -{ - mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); - - mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); - - return 0; -} - -#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) -#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) - -static int devboard_isp1105_init(struct otg_transceiver *otg) -{ - int ret = gpio_request(USBH1_MODE, "usbh1-mode"); - if (ret) - return ret; - /* single ended */ - gpio_direction_output(USBH1_MODE, 0); - - ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); - if (ret) { - gpio_free(USBH1_MODE); - return ret; - } - gpio_direction_output(USBH1_VBUSEN_B, 1); - - return 0; -} - - -static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on) -{ - if (on) - gpio_set_value(USBH1_VBUSEN_B, 0); - else - gpio_set_value(USBH1_VBUSEN_B, 1); - - return 0; -} - -static struct mxc_usbh_platform_data usbh1_pdata = { - .init = devboard_usbh1_hw_init, - .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, -}; - -static int __init devboard_usbh1_init(void) -{ - struct otg_transceiver *otg; - - otg = kzalloc(sizeof(*otg), GFP_KERNEL); - if (!otg) - return -ENOMEM; - - otg->label = "ISP1105"; - otg->init = devboard_isp1105_init; - otg->set_vbus = devboard_isp1105_set_vbus; - - usbh1_pdata.otg = otg; - - return mxc_register_device(&mxc_usbh1, &usbh1_pdata); -} - - -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -/* - * system init for baseboard usage. Will be called by mx31moboard init. - */ -void __init mx31moboard_devboard_init(void) -{ - printk(KERN_INFO "Initializing mx31devboard peripherals\n"); - - mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins), - "devboard"); - - imx31_add_imx_uart1(&uart_pdata); - - mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); - - devboard_init_sel_gpios(); - - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); - - devboard_usbh1_init(); -} diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c deleted file mode 100644 index 18069cb7d06..00000000000 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/types.h> -#include <linux/fsl_devices.h> - -#include <linux/usb/otg.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/imx-uart.h> -#include <mach/iomux-mx3.h> -#include <mach/mmc.h> -#include <mach/mxc_ehci.h> -#include <mach/ulpi.h> - -#include <media/soc_camera.h> - -#include "devices.h" - -static unsigned int marxbot_pins[] = { - /* SDHC2 */ - MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2, - MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0, - MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD, - MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29, - /* CSI */ - MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, - MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, - MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, - MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, - MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, - MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, - MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, - MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5, - MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, - MX31_PIN_TXD2__GPIO1_28, - /* dsPIC resets */ - MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22, - /*battery detection */ - MX31_PIN_LCS0__GPIO3_23, - /* USB H1 */ - MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM, - MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP, - MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB, - MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND, - MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12, - /* SEL */ - MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, - MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, -}; - -#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR) -#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW) - -static int marxbot_sdhc2_get_ro(struct device *dev) -{ - return !gpio_get_value(SDHC2_WP); -} - -static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request(SDHC2_CD, "sdhc-detect"); - if (ret) - return ret; - - gpio_direction_input(SDHC2_CD); - - ret = gpio_request(SDHC2_WP, "sdhc-wp"); - if (ret) - goto err_gpio_free; - gpio_direction_input(SDHC2_WP); - - ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "sdhc2-card-detect", data); - if (ret) - goto err_gpio_free_2; - - return 0; - -err_gpio_free_2: - gpio_free(SDHC2_WP); -err_gpio_free: - gpio_free(SDHC2_CD); - - return ret; -} - -static void marxbot_sdhc2_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(SDHC2_CD), data); - gpio_free(SDHC2_WP); - gpio_free(SDHC2_CD); -} - -static struct imxmmc_platform_data sdhc2_pdata = { - .get_ro = marxbot_sdhc2_get_ro, - .init = marxbot_sdhc2_init, - .exit = marxbot_sdhc2_exit, -}; - -#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5) -#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5) - -static void dspics_resets_init(void) -{ - if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { - gpio_direction_output(TRSLAT_RST_B, 0); - gpio_export(TRSLAT_RST_B, false); - } - - if (!gpio_request(DSPICS_RST_B, "dspics-rst")) { - gpio_direction_output(DSPICS_RST_B, 0); - gpio_export(DSPICS_RST_B, false); - } -} - -static struct spi_board_info marxbot_spi_board_info[] __initdata = { - { - .modalias = "spidev", - .max_speed_hz = 300000, - .bus_num = 1, - .chip_select = 1, /* according spi1_cs[] ! */ - }, -}; - -#define TURRETCAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) -#define BASECAM_POWER IOMUX_TO_GPIO(MX31_PIN_CSI_D5) -#define TURRETCAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) -#define BASECAM_RST_B IOMUX_TO_GPIO(MX31_PIN_CSI_D4) -#define CAM_CHOICE IOMUX_TO_GPIO(MX31_PIN_TXD2) - -static int marxbot_basecam_power(struct device *dev, int on) -{ - gpio_set_value(BASECAM_POWER, !on); - return 0; -} - -static int marxbot_basecam_reset(struct device *dev) -{ - gpio_set_value(BASECAM_RST_B, 0); - udelay(100); - gpio_set_value(BASECAM_RST_B, 1); - return 0; -} - -static struct i2c_board_info marxbot_i2c_devices[] = { - { - I2C_BOARD_INFO("mt9t031", 0x5d), - }, -}; - -static struct soc_camera_link base_iclink = { - .bus_id = 0, /* Must match with the camera ID */ - .power = marxbot_basecam_power, - .reset = marxbot_basecam_reset, - .board_info = &marxbot_i2c_devices[0], - .i2c_adapter_id = 0, -}; - -static struct platform_device marxbot_camera[] = { - { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &base_iclink, - }, - }, -}; - -static struct platform_device *marxbot_cameras[] __initdata = { - &marxbot_camera[0], -}; - -static int __init marxbot_cam_init(void) -{ - int ret = gpio_request(CAM_CHOICE, "cam-choice"); - if (ret) - return ret; - gpio_direction_output(CAM_CHOICE, 0); - - ret = gpio_request(BASECAM_RST_B, "basecam-reset"); - if (ret) - return ret; - gpio_direction_output(BASECAM_RST_B, 1); - ret = gpio_request(BASECAM_POWER, "basecam-standby"); - if (ret) - return ret; - gpio_direction_output(BASECAM_POWER, 0); - - ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset"); - if (ret) - return ret; - gpio_direction_output(TURRETCAM_RST_B, 1); - ret = gpio_request(TURRETCAM_POWER, "turretcam-standby"); - if (ret) - return ret; - gpio_direction_output(TURRETCAM_POWER, 0); - - return 0; -} - -#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) -#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) -#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) - -static void marxbot_init_sel_gpios(void) -{ - if (!gpio_request(SEL0, "sel0")) { - gpio_direction_input(SEL0); - gpio_export(SEL0, true); - } - - if (!gpio_request(SEL1, "sel1")) { - gpio_direction_input(SEL1); - gpio_export(SEL1, true); - } - - if (!gpio_request(SEL2, "sel2")) { - gpio_direction_input(SEL2); - gpio_export(SEL2, true); - } - - if (!gpio_request(SEL3, "sel3")) { - gpio_direction_input(SEL3); - gpio_export(SEL3, true); - } -} - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -static int marxbot_usbh1_hw_init(struct platform_device *pdev) -{ - mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); - - mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); - - return 0; -} - -#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) -#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE) - -static int marxbot_isp1105_init(struct otg_transceiver *otg) -{ - int ret = gpio_request(USBH1_MODE, "usbh1-mode"); - if (ret) - return ret; - /* single ended */ - gpio_direction_output(USBH1_MODE, 0); - - ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen"); - if (ret) { - gpio_free(USBH1_MODE); - return ret; - } - gpio_direction_output(USBH1_VBUSEN_B, 1); - - return 0; -} - - -static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on) -{ - if (on) - gpio_set_value(USBH1_VBUSEN_B, 0); - else - gpio_set_value(USBH1_VBUSEN_B, 1); - - return 0; -} - -static struct mxc_usbh_platform_data usbh1_pdata = { - .init = marxbot_usbh1_hw_init, - .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, -}; - -static int __init marxbot_usbh1_init(void) -{ - struct otg_transceiver *otg; - - otg = kzalloc(sizeof(*otg), GFP_KERNEL); - if (!otg) - return -ENOMEM; - - otg->label = "ISP1105"; - otg->init = marxbot_isp1105_init; - otg->set_vbus = marxbot_isp1105_set_vbus; - - usbh1_pdata.otg = otg; - - return mxc_register_device(&mxc_usbh1, &usbh1_pdata); -} - -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -/* - * system init for baseboard usage. Will be called by mx31moboard init. - */ -void __init mx31moboard_marxbot_init(void) -{ - printk(KERN_INFO "Initializing mx31marxbot peripherals\n"); - - mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins), - "marxbot"); - - marxbot_init_sel_gpios(); - - dspics_resets_init(); - - mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata); - - spi_register_board_info(marxbot_spi_board_info, - ARRAY_SIZE(marxbot_spi_board_info)); - - marxbot_cam_init(); - platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras)); - - /* battery present pin */ - gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present"); - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); - gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false); - - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); - - marxbot_usbh1_init(); -} diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c deleted file mode 100644 index 04760a53005..00000000000 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/platform_device.h> -#include <linux/types.h> -#include <linux/fsl_devices.h> - -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31moboard.h> -#include <mach/mxc_ehci.h> -#include <mach/ulpi.h> - -#include <media/soc_camera.h> - -#include "devices-imx31.h" -#include "devices.h" - -static unsigned int smartbot_pins[] = { - /* UART1 */ - MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, - /* CSI */ - MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5, - MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7, - MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9, - MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11, - MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13, - MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15, - MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK, - MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC, - MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1, - /* ENABLES */ - MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9, - MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#define CAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) -#define CAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) - -static int smartbot_cam_power(struct device *dev, int on) -{ - gpio_set_value(CAM_POWER, !on); - return 0; -} - -static int smartbot_cam_reset(struct device *dev) -{ - gpio_set_value(CAM_RST_B, 0); - udelay(100); - gpio_set_value(CAM_RST_B, 1); - return 0; -} - -static struct i2c_board_info smartbot_i2c_devices[] = { - { - I2C_BOARD_INFO("mt9t031", 0x5d), - }, -}; - -static struct soc_camera_link base_iclink = { - .bus_id = 0, /* Must match with the camera ID */ - .power = smartbot_cam_power, - .reset = smartbot_cam_reset, - .board_info = &smartbot_i2c_devices[0], - .i2c_adapter_id = 0, -}; - -static struct platform_device smartbot_camera[] = { - { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &base_iclink, - }, - }, -}; - -static struct platform_device *smartbot_cameras[] __initdata = { - &smartbot_camera[0], -}; - -static int __init smartbot_cam_init(void) -{ - int ret = gpio_request(CAM_RST_B, "cam-reset"); - if (ret) - return ret; - gpio_direction_output(CAM_RST_B, 1); - ret = gpio_request(CAM_POWER, "cam-standby"); - if (ret) - return ret; - gpio_direction_output(CAM_POWER, 0); - - return 0; -} - -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -#if defined(CONFIG_USB_ULPI) - -static struct mxc_usbh_platform_data otg_host_pdata = { - .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, -}; - -static int __init smartbot_otg_host_init(void) -{ - otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - return mxc_register_device(&mxc_otg_host, &otg_host_pdata); -} -#else -static inline int smartbot_otg_host_init(void) { return 0; } -#endif - -#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) -#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) -#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) - -static void smartbot_resets_init(void) -{ - if (!gpio_request(POWER_EN, "power-enable")) { - gpio_direction_output(POWER_EN, 0); - gpio_export(POWER_EN, false); - } - - if (!gpio_request(DSPIC_RST_B, "dspic-rst")) { - gpio_direction_output(DSPIC_RST_B, 0); - gpio_export(DSPIC_RST_B, false); - } - - if (!gpio_request(TRSLAT_RST_B, "translator-rst")) { - gpio_direction_output(TRSLAT_RST_B, 0); - gpio_export(TRSLAT_RST_B, false); - } - - if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) { - gpio_direction_output(TRSLAT_SRC_CHOICE, 0); - gpio_export(TRSLAT_SRC_CHOICE, false); - } -} -/* - * system init for baseboard usage. Will be called by mx31moboard init. - */ -void __init mx31moboard_smartbot_init(int board) -{ - printk(KERN_INFO "Initializing mx31smartbot peripherals\n"); - - mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins), - "smartbot"); - - imx31_add_imx_uart1(&uart_pdata); - - switch (board) { - case MX31SMARTBOT: - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); - break; - case MX31EYEBOT: - smartbot_otg_host_init(); - break; - default: - printk(KERN_WARNING "Unknown board %d, USB OTG not initialized", - board); - } - - smartbot_resets_init(); - - smartbot_cam_init(); - platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras)); -} diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h deleted file mode 100644 index d6929721a5f..00000000000 --- a/arch/arm/mach-mx3/pcm037.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __PCM037_H__ -#define __PCM037_H__ - -enum pcm037_board_variant { - PCM037_PCM970, - PCM037_EET, -}; - -extern enum pcm037_board_variant pcm037_variant(void); - -#endif |