diff options
Diffstat (limited to 'arch/arm/mach-mx3/devices.c')
| -rw-r--r-- | arch/arm/mach-mx3/devices.c | 362 |
1 files changed, 0 insertions, 362 deletions
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c deleted file mode 100644 index d4da9496089..00000000000 --- a/arch/arm/mach-mx3/devices.c +++ /dev/null @@ -1,362 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/dma-mapping.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/common.h> -#include <mach/mx3_camera.h> - -#include "devices.h" - -/* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = IO_ADDRESS(GPIO1_BASE_ADDR), - .irq = MXC_INT_GPIO1, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = IO_ADDRESS(GPIO2_BASE_ADDR), - .irq = MXC_INT_GPIO2, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = IO_ADDRESS(GPIO3_BASE_ADDR), - .irq = MXC_INT_GPIO3, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - } -}; - -int __init imx3x_register_gpios(void) -{ - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); -} - -static struct resource mxc_w1_master_resources[] = { - { - .start = OWIRE_BASE_ADDR, - .end = OWIRE_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_w1_master_device = { - .name = "mxc_w1", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_w1_master_resources), - .resource = mxc_w1_master_resources, -}; - -#ifdef CONFIG_ARCH_MX31 -static struct resource mxcsdhc0_resources[] = { - { - .start = MX31_MMC_SDHC1_BASE_ADDR, - .end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_MMC_SDHC1, - .end = MX31_INT_MMC_SDHC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxcsdhc1_resources[] = { - { - .start = MX31_MMC_SDHC2_BASE_ADDR, - .end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_MMC_SDHC2, - .end = MX31_INT_MMC_SDHC2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxcsdhc_device0 = { - .name = "mxc-mmc", - .id = 0, - .num_resources = ARRAY_SIZE(mxcsdhc0_resources), - .resource = mxcsdhc0_resources, -}; - -struct platform_device mxcsdhc_device1 = { - .name = "mxc-mmc", - .id = 1, - .num_resources = ARRAY_SIZE(mxcsdhc1_resources), - .resource = mxcsdhc1_resources, -}; - -static struct resource rnga_resources[] = { - { - .start = RNGA_BASE_ADDR, - .end = RNGA_BASE_ADDR + 0x28, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_rnga_device = { - .name = "mxc_rnga", - .id = -1, - .num_resources = 1, - .resource = rnga_resources, -}; -#endif /* CONFIG_ARCH_MX31 */ - -/* i.MX31 Image Processing Unit */ - -/* The resource order is important! */ -static struct resource mx3_ipu_rsrc[] = { - { - .start = IPU_CTRL_BASE_ADDR, - .end = IPU_CTRL_BASE_ADDR + 0x5F, - .flags = IORESOURCE_MEM, - }, { - .start = IPU_CTRL_BASE_ADDR + 0x88, - .end = IPU_CTRL_BASE_ADDR + 0xB3, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_IPU_SYN, - .end = MXC_INT_IPU_SYN, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC_INT_IPU_ERR, - .end = MXC_INT_IPU_ERR, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx3_ipu = { - .name = "ipu-core", - .id = -1, - .num_resources = ARRAY_SIZE(mx3_ipu_rsrc), - .resource = mx3_ipu_rsrc, -}; - -static struct resource fb_resources[] = { - { - .start = IPU_CTRL_BASE_ADDR + 0xB4, - .end = IPU_CTRL_BASE_ADDR + 0x1BF, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mx3_fb = { - .name = "mx3_sdc_fb", - .id = -1, - .num_resources = ARRAY_SIZE(fb_resources), - .resource = fb_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource camera_resources[] = { - { - .start = IPU_CTRL_BASE_ADDR + 0x60, - .end = IPU_CTRL_BASE_ADDR + 0x87, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mx3_camera = { - .name = "mx3-camera", - .id = 0, - .num_resources = ARRAY_SIZE(camera_resources), - .resource = camera_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource otg_resources[] = { - { - .start = MX31_OTG_BASE_ADDR, - .end = MX31_OTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB3, - .end = MXC_INT_USB3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 otg_dmamask = DMA_BIT_MASK(32); - -/* OTG gadget device */ -struct platform_device mxc_otg_udc_device = { - .name = "fsl-usb2-udc", - .id = -1, - .dev = { - .dma_mask = &otg_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* OTG host */ -struct platform_device mxc_otg_host = { - .name = "mxc-ehci", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &otg_dmamask, - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* USB host 1 */ - -static u64 usbh1_dmamask = ~(u32)0; - -static struct resource mxc_usbh1_resources[] = { - { - .start = MX31_OTG_BASE_ADDR + 0x200, - .end = MX31_OTG_BASE_ADDR + 0x3ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB1, - .end = MXC_INT_USB1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh1 = { - .name = "mxc-ehci", - .id = 1, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh1_dmamask, - }, - .resource = mxc_usbh1_resources, - .num_resources = ARRAY_SIZE(mxc_usbh1_resources), -}; - -/* USB host 2 */ -static u64 usbh2_dmamask = ~(u32)0; - -static struct resource mxc_usbh2_resources[] = { - { - .start = MX31_OTG_BASE_ADDR + 0x400, - .end = MX31_OTG_BASE_ADDR + 0x5ff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_USB2, - .end = MXC_INT_USB2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh2 = { - .name = "mxc-ehci", - .id = 2, - .dev = { - .coherent_dma_mask = 0xffffffff, - .dma_mask = &usbh2_dmamask, - }, - .resource = mxc_usbh2_resources, - .num_resources = ARRAY_SIZE(mxc_usbh2_resources), -}; - -static struct resource imx_wdt_resources[] = { - { - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device imx_wdt_device0 = { - .name = "imx2-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(imx_wdt_resources), - .resource = imx_wdt_resources, -}; - -static struct resource imx_rtc_resources[] = { - { - .start = MX31_RTC_BASE_ADDR, - .end = MX31_RTC_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX31_INT_RTC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_rtc_device0 = { - .name = "mxc_rtc", - .id = -1, - .num_resources = ARRAY_SIZE(imx_rtc_resources), - .resource = imx_rtc_resources, -}; - -static struct resource imx_kpp_resources[] = { - { - .start = MX3x_KPP_BASE_ADDR, - .end = MX3x_KPP_BASE_ADDR + 0xf, - .flags = IORESOURCE_MEM - }, { - .start = MX3x_INT_KPP, - .end = MX3x_INT_KPP, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_kpp_device = { - .name = "imx-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(imx_kpp_resources), - .resource = imx_kpp_resources, -}; - -static int __init mx3_devices_init(void) -{ -#if defined(CONFIG_ARCH_MX31) - if (cpu_is_mx31()) { - imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR; - imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff; - mxc_register_device(&mxc_rnga_device, NULL); - } -#endif -#if defined(CONFIG_ARCH_MX35) - if (cpu_is_mx35()) { - otg_resources[0].start = MX35_OTG_BASE_ADDR; - otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff; - otg_resources[1].start = MXC_INT_USBOTG; - otg_resources[1].end = MXC_INT_USBOTG; - mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400; - mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; - mxc_usbh1_resources[1].start = MXC_INT_USBHS; - mxc_usbh1_resources[1].end = MXC_INT_USBHS; - imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; - imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; - } -#endif - - return 0; -} - -subsys_initcall(mx3_devices_init); |