diff options
Diffstat (limited to 'arch/arm/mach-at91/board-kb9202.c')
| -rw-r--r-- | arch/arm/mach-at91/board-kb9202.c | 107 |
1 files changed, 61 insertions, 46 deletions
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a13d2063faf..d58d36225e0 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> @@ -34,50 +35,34 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/gpio.h> - +#include <mach/cpu.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" +#include "gpio.h" -static void __init kb9202_map_io(void) +static void __init kb9202_init_early(void) { - /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000, AT91RM9200_PQFP); - - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1 (Rx & Tx only) */ - at91_register_uart(AT91RM9200_ID_US0, 1, 0); - - /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */ - at91_register_uart(AT91RM9200_ID_US1, 2, 0); - - /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */ - at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init kb9202_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); + /* Initialize processor: 10 MHz crystal */ + at91_initialize(10000000); } -static struct at91_eth_data __initdata kb9202_eth_data = { +static struct macb_platform_data __initdata kb9202_eth_data = { .phy_irq_pin = AT91_PIN_PB29, .is_rmii = 0, }; static struct at91_usbh_data __initdata kb9202_usbh_data = { .ports = 1, + .vbus_pin = {-EINVAL, -EINVAL}, + .overcurrent_pin= {-EINVAL, -EINVAL}, }; static struct at91_udc_data __initdata kb9202_udc_data = { @@ -85,10 +70,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = { .pullup_pin = AT91_PIN_PB22, }; -static struct at91_mmc_data __initdata kb9202_mmc_data = { - .det_pin = AT91_PIN_PB2, - .slot_b = 0, - .wire4 = 1, +static struct mci_platform_data __initdata kb9202_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB2, + .wp_pin = -EINVAL, + }, }; static struct mtd_partition __initdata kb9202_nand_partition[] = { @@ -99,24 +86,49 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(kb9202_nand_partition); - return kb9202_nand_partition; -} - static struct atmel_nand_data __initdata kb9202_nand_data = { .ale = 22, .cle = 21, - // .det_pin = ... not there + .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC29, .enable_pin = AT91_PIN_PC28, - .partition_info = nand_partitions, + .ecc_mode = NAND_ECC_SOFT, + .parts = kb9202_nand_partition, + .num_parts = ARRAY_SIZE(kb9202_nand_partition), +}; + +/* + * LEDs + */ +static struct gpio_led kb9202_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PC19, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PC18, + .active_low = 1, + .default_trigger = "timer", + } }; static void __init kb9202_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx & Tx only) */ + at91_register_uart(AT91RM9200_ID_US0, 1, 0); + + /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */ + at91_register_uart(AT91RM9200_ID_US1, 2, 0); + + /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */ + at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&kb9202_eth_data); @@ -125,20 +137,23 @@ static void __init kb9202_board_init(void) /* USB Device */ at91_add_device_udc(&kb9202_udc_data); /* MMC */ - at91_add_device_mmc(0, &kb9202_mmc_data); + at91_add_device_mci(0, &kb9202_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); /* NAND */ at91_add_device_nand(&kb9202_nand_data); + /* LEDs */ + at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds)); } MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91rm9200_timer, - .map_io = kb9202_map_io, - .init_irq = kb9202_init_irq, + .init_time = at91rm9200_timer_init, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = kb9202_init_early, + .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, MACHINE_END |