1 files changed, 26 insertions, 31 deletions

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 464839dc39b..0e35a45cf8d 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -37,44 +38,34 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
 
+#include "at91_aic.h"
+#include "board.h"
 #include "generic.h"
+#include "gpio.h"
 
-
-static void __init csb337_map_io(void)
+static void __init csb337_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* DBGU on ttyS0 */
-	at91_register_uart(0, 0, 0);
-
-	/* make console=ttyS0 the default */
-	at91_set_serial_console(0);
+	at91_initialize(3686400);
 }
 
-static void __init csb337_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata csb337_eth_data = {
+static struct macb_platform_data __initdata csb337_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC2,
 	.is_rmii	= 0,
+	/* The CSB337 bootloader stores the MAC the wrong-way around */
+	.rev_eth_addr	= 1,
 };
 
 static struct at91_usbh_data __initdata csb337_usbh_data = {
 	.ports		= 2,
+	.vbus_pin	= {-EINVAL, -EINVAL},
+	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb337_udc_data = {
-	// this has no VBUS sensing pin
 	.pullup_pin	= AT91_PIN_PA24,
+	.vbus_pin	= -EINVAL,
 };
 
 static struct i2c_board_info __initdata csb337_i2c_devices[] = {
@@ -98,11 +89,12 @@ static struct at91_cf_data __initdata csb337_cf_data = {
 	.rst_pin	= AT91_PIN_PD2,
 };
 
-static struct at91_mmc_data __initdata csb337_mmc_data = {
-	.det_pin	= AT91_PIN_PD5,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PD6,
+static struct mci_platform_data __initdata csb337_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PD5,
+		.wp_pin		= AT91_PIN_PD6,
+	},
 };
 
 static struct spi_board_info csb337_spi_devices[] = {
@@ -231,6 +223,8 @@ static struct gpio_led csb_leds[] = {
 static void __init csb337_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0 */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb337_eth_data);
@@ -246,7 +240,7 @@ static void __init csb337_board_init(void)
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &csb337_mmc_data);
+	at91_add_device_mci(0, &csb337_mci0_data);
 	/* NOR flash */
 	platform_device_register(&csb_flash);
 	/* LEDs */
@@ -257,9 +251,10 @@ static void __init csb337_board_init(void)
 
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= csb337_map_io,
-	.init_irq	= csb337_init_irq,
+	.init_time	= at91rm9200_timer_init,
+	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic_handle_irq,
+	.init_early	= csb337_init_early,
+	.init_irq	= at91_init_irq_default,
 	.init_machine	= csb337_board_init,
 MACHINE_END