diff options
| -rw-r--r-- | Documentation/devicetree/bindings/hsi/client-devices.txt | 44 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/hsi/nokia-modem.txt | 57 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/hsi/omap-ssi.txt | 97 | ||||
| -rw-r--r-- | Documentation/hsi.txt | 75 | ||||
| -rw-r--r-- | MAINTAINERS | 4 | ||||
| -rw-r--r-- | drivers/hsi/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/hsi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hsi/clients/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/hsi/clients/Makefile | 4 | ||||
| -rw-r--r-- | drivers/hsi/clients/hsi_char.c | 14 | ||||
| -rw-r--r-- | drivers/hsi/clients/nokia-modem.c | 285 | ||||
| -rw-r--r-- | drivers/hsi/clients/ssi_protocol.c | 1191 | ||||
| -rw-r--r-- | drivers/hsi/controllers/Kconfig | 19 | ||||
| -rw-r--r-- | drivers/hsi/controllers/Makefile | 6 | ||||
| -rw-r--r-- | drivers/hsi/controllers/omap_ssi.c | 625 | ||||
| -rw-r--r-- | drivers/hsi/controllers/omap_ssi.h | 166 | ||||
| -rw-r--r-- | drivers/hsi/controllers/omap_ssi_port.c | 1399 | ||||
| -rw-r--r-- | drivers/hsi/controllers/omap_ssi_regs.h | 171 | ||||
| -rw-r--r-- | drivers/hsi/hsi.c | 275 | ||||
| -rw-r--r-- | include/linux/hsi/hsi.h | 39 | ||||
| -rw-r--r-- | include/linux/hsi/ssi_protocol.h | 42 |
21 files changed, 4513 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/hsi/client-devices.txt b/Documentation/devicetree/bindings/hsi/client-devices.txt new file mode 100644 index 00000000000..104c9a3e57a --- /dev/null +++ b/Documentation/devicetree/bindings/hsi/client-devices.txt @@ -0,0 +1,44 @@ +Each HSI port is supposed to have one child node, which +symbols the remote device connected to the HSI port. The +following properties are standardized for HSI clients: + +Required HSI configuration properties: + +- hsi-channel-ids: A list of channel ids + +- hsi-rx-mode: Receiver Bit transmission mode ("stream" or "frame") +- hsi-tx-mode: Transmitter Bit transmission mode ("stream" or "frame") +- hsi-mode: May be used instead hsi-rx-mode and hsi-tx-mode if + the transmission mode is the same for receiver and + transmitter +- hsi-speed-kbps: Max bit transmission speed in kbit/s +- hsi-flow: RX flow type ("synchronized" or "pipeline") +- hsi-arb-mode: Arbitration mode for TX frame ("round-robin", "priority") + +Optional HSI configuration properties: + +- hsi-channel-names: A list with one name per channel specified in the + hsi-channel-ids property + + +Device Tree node example for an HSI client: + +hsi-controller { + hsi-port { + modem: hsi-client { + compatible = "nokia,n900-modem"; + + hsi-channel-ids = <0>, <1>, <2>, <3>; + hsi-channel-names = "mcsaab-control", + "speech-control", + "speech-data", + "mcsaab-data"; + hsi-speed-kbps = <55000>; + hsi-mode = "frame"; + hsi-flow = "synchronized"; + hsi-arb-mode = "round-robin"; + + /* more client specific properties */ + }; + }; +}; diff --git a/Documentation/devicetree/bindings/hsi/nokia-modem.txt b/Documentation/devicetree/bindings/hsi/nokia-modem.txt new file mode 100644 index 00000000000..8a979780452 --- /dev/null +++ b/Documentation/devicetree/bindings/hsi/nokia-modem.txt @@ -0,0 +1,57 @@ +Nokia modem client bindings + +The Nokia modem HSI client follows the common HSI client binding +and inherits all required properties. The following additional +properties are needed by the Nokia modem HSI client: + +Required properties: +- compatible: Should be one of + "nokia,n900-modem" +- hsi-channel-names: Should contain the following strings + "mcsaab-control" + "speech-control" + "speech-data" + "mcsaab-data" +- gpios: Should provide a GPIO handler for each GPIO listed in + gpio-names +- gpio-names: Should contain the following strings + "cmt_apeslpx" + "cmt_rst_rq" + "cmt_en" + "cmt_rst" + "cmt_bsi" +- interrupts: Should be IRQ handle for modem's reset indication + +Example: + +&ssi_port { + modem: hsi-client { + compatible = "nokia,n900-modem"; + + pinctrl-names = "default"; + pinctrl-0 = <&modem_pins>; + + hsi-channel-ids = <0>, <1>, <2>, <3>; + hsi-channel-names = "mcsaab-control", + "speech-control", + "speech-data", + "mcsaab-data"; + hsi-speed-kbps = <55000>; + hsi-mode = "frame"; + hsi-flow = "synchronized"; + hsi-arb-mode = "round-robin"; + + interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ + + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ + <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ + <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ + <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ + <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ + gpio-names = "cmt_apeslpx", + "cmt_rst_rq", + "cmt_en", + "cmt_rst", + "cmt_bsi"; + }; +}; diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt new file mode 100644 index 00000000000..f26625e4269 --- /dev/null +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -0,0 +1,97 @@ +OMAP SSI controller bindings + +OMAP Synchronous Serial Interface (SSI) controller implements a legacy +variant of MIPI's High Speed Synchronous Serial Interface (HSI). + +Required properties: +- compatible: Should include "ti,omap3-ssi". +- reg-names: Contains the values "sys" and "gdd" (in this order). +- reg: Contains a matching register specifier for each entry + in reg-names. +- interrupt-names: Contains the value "gdd_mpu". +- interrupts: Contains matching interrupt information for each entry + in interrupt-names. +- ranges: Represents the bus address mapping between the main + controller node and the child nodes below. +- clock-names: Must include the following entries: + "ssi_ssr_fck": The OMAP clock of that name + "ssi_sst_fck": The OMAP clock of that name + "ssi_ick": The OMAP clock of that name +- clocks: Contains a matching clock specifier for each entry in + clock-names. +- #address-cells: Should be set to <1> +- #size-cells: Should be set to <1> + +Each port is represented as a sub-node of the ti,omap3-ssi device. + +Required Port sub-node properties: +- compatible: Should be set to the following value + ti,omap3-ssi-port (applicable to OMAP34xx devices) +- reg-names: Contains the values "tx" and "rx" (in this order). +- reg: Contains a matching register specifier for each entry + in reg-names. +- interrupt-parent Should be a phandle for the interrupt controller +- interrupts: Should contain interrupt specifiers for mpu interrupts + 0 and 1 (in this order). +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE + events for the port. This is an optional board-specific + property. If it's missing the port will not be + enabled. + +Example for Nokia N900: + +ssi-controller@48058000 { + compatible = "ti,omap3-ssi"; + + /* needed until hwmod is updated to use the compatible string */ + ti,hwmods = "ssi"; + + reg = <0x48058000 0x1000>, + <0x48059000 0x1000>; + reg-names = "sys", + "gdd"; + + interrupts = <55>; + interrupt-names = "gdd_mpu"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ssi-port@4805a000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805a000 0x800>, + <0x4805a800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <67>, + <68>; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + } + + ssi-port@4805a000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805b000 0x800>, + <0x4805b800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <69>, + <70>; + + status = "disabled"; /* second port is not used on N900 */ + } +} diff --git a/Documentation/hsi.txt b/Documentation/hsi.txt new file mode 100644 index 00000000000..6ac6cd51852 --- /dev/null +++ b/Documentation/hsi.txt @@ -0,0 +1,75 @@ +HSI - High-speed Synchronous Serial Interface + +1. Introduction +~~~~~~~~~~~~~~~ + +High Speed Syncronous Interface (HSI) is a fullduplex, low latency protocol, +that is optimized for die-level interconnect between an Application Processor +and a Baseband chipset. It has been specified by the MIPI alliance in 2003 and +implemented by multiple vendors since then. + +The HSI interface supports full duplex communication over multiple channels +(typically 8) and is capable of reaching speeds up to 200 Mbit/s. + +The serial protocol uses two signals, DATA and FLAG as combined data and clock +signals and an additional READY signal for flow control. An additional WAKE +signal can be used to wakeup the chips from standby modes. The signals are +commonly prefixed by AC for signals going from the application die to the +cellular die and CA for signals going the other way around. + ++------------+ +---------------+ +| Cellular | | Application | +| Die | | Die | +| | - - - - - - CAWAKE - - - - - - >| | +| T|------------ CADATA ------------>|R | +| X|------------ CAFLAG ------------>|X | +| |<----------- ACREADY ------------| | +| | | | +| | | | +| |< - - - - - ACWAKE - - - - - - -| | +| R|<----------- ACDATA -------------|T | +| X|<----------- ACFLAG -------------|X | +| |------------ CAREADY ----------->| | +| | | | +| | | | ++------------+ +---------------+ + +2. HSI Subsystem in Linux +~~~~~~~~~~~~~~~~~~~~~~~~~ + +In the Linux kernel the hsi subsystem is supposed to be used for HSI devices. +The hsi subsystem contains drivers for hsi controllers including support for +multi-port controllers and provides a generic API for using the HSI ports. + +It also contains HSI client drivers, which make use of the generic API to +implement a protocol used on the HSI interface. These client drivers can +use an arbitrary number of channels. + +3. hsi-char Device +~~~~~~~~~~~~~~~~~~ + +Each port automatically registers a generic client driver called hsi_char, +which provides a charecter device for userspace representing the HSI port. +It can be used to communicate via HSI from userspace. Userspace may +configure the hsi_char device using the following ioctl commands: + +* HSC_RESET: + - flush the HSI port + +* HSC_SET_PM + - enable or disable the client. + +* HSC_SEND_BREAK + - send break + +* HSC_SET_RX + - set RX configuration + +* HSC_GET_RX + - get RX configuration + +* HSC_SET_TX + - set TX configuration + +* HSC_GET_TX + - get TX configuration diff --git a/MAINTAINERS b/MAINTAINERS index c496c311ffb..672b80aa236 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4204,9 +4204,11 @@ S: Maintained F: fs/hpfs/ HSI SUBSYSTEM -M: Sebastian Reichel <sre@debian.org> +M: Sebastian Reichel <sre@kernel.org> +T: git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git S: Maintained F: Documentation/ABI/testing/sysfs-bus-hsi +F: Documentation/hsi.txt F: drivers/hsi/ F: include/linux/hsi/ F: include/uapi/linux/hsi/ diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig index d94e38dd80c..2c76de438eb 100644 --- a/drivers/hsi/Kconfig +++ b/drivers/hsi/Kconfig @@ -14,6 +14,7 @@ config HSI_BOARDINFO bool default y +source "drivers/hsi/controllers/Kconfig" source "drivers/hsi/clients/Kconfig" endif # HSI diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile index 9d5d33f90de..360371e134f 100644 --- a/drivers/hsi/Makefile +++ b/drivers/hsi/Makefile @@ -3,4 +3,5 @@ # obj-$(CONFIG_HSI_BOARDINFO) += hsi_boardinfo.o obj-$(CONFIG_HSI) += hsi.o +obj-y += controllers/ obj-y += clients/ diff --git a/drivers/hsi/clients/Kconfig b/drivers/hsi/clients/Kconfig index 3bacd275f47..71b9f9ab86e 100644 --- a/drivers/hsi/clients/Kconfig +++ b/drivers/hsi/clients/Kconfig @@ -4,6 +4,23 @@ comment "HSI clients" +config NOKIA_MODEM + tristate "Nokia Modem" + depends on HSI && SSI_PROTOCOL + help + Say Y here if you want to add support for the modem on Nokia + N900 (Nokia RX-51) hardware. + + If unsure, say N. + +config SSI_PROTOCOL + tristate "SSI protocol" + depends on HSI && PHONET && (OMAP_SSI=y || OMAP_SSI=m) + help + If you say Y here, you will enable the SSI protocol aka McSAAB. + + If unsure, say N. + config HSI_CHAR tristate "HSI/SSI character driver" depends on HSI diff --git a/drivers/hsi/clients/Makefile b/drivers/hsi/clients/Makefile index 327c0e27c8b..4d5bc0e0b27 100644 --- a/drivers/hsi/clients/Makefile +++ b/drivers/hsi/clients/Makefile @@ -2,4 +2,6 @@ # Makefile for HSI clients # -obj-$(CONFIG_HSI_CHAR) += hsi_char.o +obj-$(CONFIG_NOKIA_MODEM) += nokia-modem.o +obj-$(CONFIG_SSI_PROTOCOL) += ssi_protocol.o +obj-$(CONFIG_HSI_CHAR) += hsi_char.o diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c index e61e5f991aa..57f70c28fa3 100644 --- a/drivers/hsi/clients/hsi_char.c +++ b/drivers/hsi/clients/hsi_char.c @@ -367,7 +367,7 @@ static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc) return -EINVAL; tmp = cl->rx_cfg; cl->rx_cfg.mode = rxc->mode; - cl->rx_cfg.channels = rxc->channels; + cl->rx_cfg.num_hw_channels = rxc->channels; cl->rx_cfg.flow = rxc->flow; ret = hsi_setup(cl); if (ret < 0) { @@ -383,7 +383,7 @@ static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc) static inline void hsc_rx_get(struct hsi_client *cl, struct hsc_rx_config *rxc) { rxc->mode = cl->rx_cfg.mode; - rxc->channels = cl->rx_cfg.channels; + rxc->channels = cl->rx_cfg.num_hw_channels; rxc->flow = cl->rx_cfg.flow; } @@ -402,7 +402,7 @@ static int hsc_tx_set(struct hsi_client *cl, struct hsc_tx_config *txc) return -EINVAL; tmp = cl->tx_cfg; cl->tx_cfg.mode = txc->mode; - cl->tx_cfg.channels = txc->channels; + cl->tx_cfg.num_hw_channels = txc->channels; cl->tx_cfg.speed = txc->speed; cl->tx_cfg.arb_mode = txc->arb_mode; ret = hsi_setup(cl); @@ -417,7 +417,7 @@ static int hsc_tx_set(struct hsi_client *cl, struct hsc_tx_config *txc) static inline void hsc_tx_get(struct hsi_client *cl, struct hsc_tx_config *txc) { txc->mode = cl->tx_cfg.mode; - txc->channels = cl->tx_cfg.channels; + txc->channels = cl->tx_cfg.num_hw_channels; txc->speed = cl->tx_cfg.speed; txc->arb_mode = cl->tx_cfg.arb_mode; } @@ -435,7 +435,7 @@ static ssize_t hsc_read(struct file *file, char __user *buf, size_t len, return -EINVAL; if (len > max_data_size) len = max_data_size; - if (channel->ch >= channel->cl->rx_cfg.channels) + if (channel->ch >= channel->cl->rx_cfg.num_hw_channels) return -ECHRNG; if (test_and_set_bit(HSC_CH_READ, &channel->flags)) return -EBUSY; @@ -492,7 +492,7 @@ static ssize_t hsc_write(struct file *file, const char __user *buf, size_t len, return -EINVAL; if (len > max_data_size) len = max_data_size; - if (channel->ch >= channel->cl->tx_cfg.channels) + if (channel->ch >= channel->cl->tx_cfg.num_hw_channels) return -ECHRNG; if (test_and_set_bit(HSC_CH_WRITE, &channel->flags)) return -EBUSY; @@ -705,7 +705,7 @@ static int hsc_probe(struct device *dev) if (!hsc_major) { ret = alloc_chrdev_region(&hsc_dev, hsc_baseminor, HSC_DEVS, devname); - if (ret > 0) + if (ret == 0) hsc_major = MAJOR(hsc_dev); } else { hsc_dev = MKDEV(hsc_major, hsc_baseminor); diff --git a/drivers/hsi/clients/nokia-modem.c b/drivers/hsi/clients/nokia-modem.c new file mode 100644 index 00000000000..363b780dace --- /dev/null +++ b/drivers/hsi/clients/nokia-modem.c @@ -0,0 +1,285 @@ +/* + * nokia-modem.c + * + * HSI client driver for Nokia N900 modem. + * + * Copyright (C) 2014 Sebastian Reichel <sre@kernel.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/gpio/consumer.h> +#include <linux/hsi/hsi.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/hsi/ssi_protocol.h> + +static unsigned int pm; +module_param(pm, int, 0400); +MODULE_PARM_DESC(pm, + "Enable power management (0=disabled, 1=userland based [default])"); + +struct nokia_modem_gpio { + struct gpio_desc *gpio; + const char *name; +}; + +struct nokia_modem_device { + struct tasklet_struct nokia_modem_rst_ind_tasklet; + int nokia_modem_rst_ind_irq; + struct device *device; + struct nokia_modem_gpio *gpios; + int gpio_amount; + struct hsi_client *ssi_protocol; +}; + +static void do_nokia_modem_rst_ind_tasklet(unsigned long data) +{ + struct nokia_modem_device *modem = (struct nokia_modem_device *)data; + + if (!modem) + return; + + dev_info(modem->device, "CMT rst line change detected\n"); + + if (modem->ssi_protocol) + ssip_reset_event(modem->ssi_protocol); +} + +static irqreturn_t nokia_modem_rst_ind_isr(int irq, void *data) +{ + struct nokia_modem_device *modem = (struct nokia_modem_device *)data; + + tasklet_schedule(&modem->nokia_modem_rst_ind_tasklet); + + return IRQ_HANDLED; +} + +static void nokia_modem_gpio_unexport(struct device *dev) +{ + struct nokia_modem_device *modem = dev_get_drvdata(dev); + int i; + + for (i = 0; i < modem->gpio_amount; i++) { + sysfs_remove_link(&dev->kobj, modem->gpios[i].name); + gpiod_unexport(modem->gpios[i].gpio); + } +} + +static int nokia_modem_gpio_probe(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct nokia_modem_device *modem = dev_get_drvdata(dev); + int gpio_count, gpio_name_count, i, err; + + gpio_count = of_gpio_count(np); + + if (gpio_count < 0) { + dev_err(dev, "missing gpios: %d\n", gpio_count); + return gpio_count; + } + + gpio_name_count = of_property_count_strings(np, "gpio-names"); + + if (gpio_count != gpio_name_count) { + dev_err(dev, "number of gpios does not equal number of gpio names\n"); + return -EINVAL; + } + + modem->gpios = devm_kzalloc(dev, gpio_count * + sizeof(struct nokia_modem_gpio), GFP_KERNEL); + if (!modem->gpios) { + dev_err(dev, "Could not allocate memory for gpios\n"); + return -ENOMEM; + } + + modem->gpio_amount = gpio_count; + + for (i = 0; i < gpio_count; i++) { + modem->gpios[i].gpio = devm_gpiod_get_index(dev, NULL, i); + if (IS_ERR(modem->gpios[i].gpio)) { + dev_err(dev, "Could not get gpio %d\n", i); + return PTR_ERR(modem->gpios[i].gpio); + } + + err = of_property_read_string_index(np, "gpio-names", i, + &(modem->gpios[i].name)); + if (err) { + dev_err(dev, "Could not get gpio name %d\n", i); + return err; + } + + err = gpiod_direction_output(modem->gpios[i].gpio, 0); + if (err) + return err; + + err = gpiod_export(modem->gpios[i].gpio, 0); + if (err) + return err; + + err = gpiod_export_link(dev, modem->gpios[i].name, + modem->gpios[i].gpio); + if (err) + return err; + } + + return 0; +} + +static int nokia_modem_probe(struct device *dev) +{ + struct device_node *np; + struct nokia_modem_device *modem; + struct hsi_client *cl = to_hsi_client(dev); + struct hsi_port *port = hsi_get_port(cl); + int irq, pflags, err; + struct hsi_board_info ssip; + + np = dev->of_node; + if (!np) { + dev_err(dev, "device tree node not found\n"); + return -ENXIO; + } + + modem = devm_kzalloc(dev, sizeof(*modem), GFP_KERNEL); + if (!modem) { + dev_err(dev, "Could not allocate memory for nokia_modem_device\n"); + return -ENOMEM; + } + dev_set_drvdata(dev, modem); + + irq = irq_of_parse_and_map(np, 0); + if (irq < 0) { + dev_err(dev, "Invalid rst_ind interrupt (%d)\n", irq); + return irq; + } + modem->nokia_modem_rst_ind_irq = irq; + pflags = irq_get_trigger_type(irq); + + tasklet_init(&modem->nokia_modem_rst_ind_tasklet, + do_nokia_modem_rst_ind_tasklet, (unsigned long)modem); + err = devm_request_irq(dev, irq, nokia_modem_rst_ind_isr, + IRQF_DISABLED | pflags, "modem_rst_ind", modem); + if (err < 0) { + dev_err(dev, "Request rst_ind irq(%d) failed (flags %d)\n", + irq, pflags); + return err; + } + enable_irq_wake(irq); + + if(pm) { + err = nokia_modem_gpio_probe(dev); + if (err < 0) { + dev_err(dev, "Could not probe GPIOs\n"); + goto error1; + } + } + + ssip.name = "ssi-protocol"; + ssip.tx_cfg = cl->tx_cfg; + ssip.rx_cfg = cl->rx_cfg; + ssip.platform_data = NULL; + ssip.archdata = NULL; + + modem->ssi_protocol = hsi_new_client(port, &ssip); + if (!modem->ssi_protocol) { + dev_err(dev, "Could not register ssi-protocol device\n"); + goto error2; + } + + err = device_attach(&modem->ssi_protocol->device); + if (err == 0) { + dev_err(dev, "Missing ssi-protocol driver\n"); + err = -EPROBE_DEFER; + goto error3; + } else if (err < 0) { + dev_err(dev, "Could not load ssi-protocol driver (%d)\n", err); + goto error3; + } + + /* TODO: register cmt-speech hsi client */ + + dev_info(dev, "Registered Nokia HSI modem\n"); + + return 0; + +error3: + hsi_remove_client(&modem->ssi_protocol->device, NULL); +error2: + nokia_modem_gpio_unexport(dev); +error1: + disable_irq_wake(modem->nokia_modem_rst_ind_irq); + tasklet_kill(&modem->nokia_modem_rst_ind_tasklet); + + return err; +} + +static int nokia_modem_remove(struct device *dev) +{ + struct nokia_modem_device *modem = dev_get_drvdata(dev); + + if (!modem) + return 0; + + if (modem->ssi_protocol) { + hsi_remove_client(&modem->ssi_protocol->device, NULL); + modem->ssi_protocol = NULL; + } + + nokia_modem_gpio_unexport(dev); + dev_set_drvdata(dev, NULL); + disable_irq_wake(modem->nokia_modem_rst_ind_irq); + tasklet_kill(&modem->nokia_modem_rst_ind_tasklet); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id nokia_modem_of_match[] = { + { .compatible = "nokia,n900-modem", }, + {}, +}; +MODULE_DEVICE_TABLE(of, nokia_modem_of_match); +#endif + +static struct hsi_client_driver nokia_modem_driver = { + .driver = { + .name = "nokia-modem", + .owner = THIS_MODULE, + .probe = nokia_modem_probe, + .remove = nokia_modem_remove, + .of_match_table = of_match_ptr(nokia_modem_of_match), + }, +}; + +static int __init nokia_modem_init(void) +{ + return hsi_register_client_driver(&nokia_modem_driver); +} +module_init(nokia_modem_init); + +static void __exit nokia_modem_exit(void) +{ + hsi_unregister_client_driver(&nokia_modem_driver); +} +module_exit(nokia_modem_exit); + +MODULE_ALIAS("hsi:nokia-modem"); +MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>"); +MODULE_DESCRIPTION("HSI driver module for Nokia N900 Modem"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hsi/clients/ssi_protocol.c b/drivers/hsi/clients/ssi_protocol.c new file mode 100644 index 00000000000..ce4be3738d4 --- /dev/null +++ b/drivers/hsi/clients/ssi_protocol.c @@ -0,0 +1,1191 @@ +/* + * ssi_protocol.c + * + * Implementation of the SSI McSAAB improved protocol. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * Copyright (C) 2013 Sebastian Reichel <sre@kernel.org> + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/atomic.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/if_ether.h> +#include <linux/if_arp.h> +#include <linux/if_phonet.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/notifier.h> +#include <linux/scatterlist.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/timer.h> +#include <linux/hsi/hsi.h> +#include <linux/hsi/ssi_protocol.h> + +void ssi_waketest(struct hsi_client *cl, unsigned int enable); + +#define SSIP_TXQUEUE_LEN 100 +#define SSIP_MAX_MTU 65535 +#define SSIP_DEFAULT_MTU 4000 +#define PN_MEDIA_SOS 21 +#define SSIP_MIN_PN_HDR 6 /* FIXME: Revisit */ +#define SSIP_WDTOUT 2000 /* FIXME: has to be 500 msecs */ +#define SSIP_KATOUT 15 /* 15 msecs */ +#define SSIP_MAX_CMDS 5 /* Number of pre-allocated commands buffers */ +#define SSIP_BYTES_TO_FRAMES(x) ((((x) - 1) >> 2) + 1) +#define SSIP_CMT_LOADER_SYNC 0x11223344 +/* + * SSI protocol command definitions + */ +#define SSIP_COMMAND(data) ((data) >> 28) +#define SSIP_PAYLOAD(data) ((data) & 0xfffffff) +/* Commands */ +#define SSIP_SW_BREAK 0 +#define SSIP_BOOTINFO_REQ 1 +#define SSIP_BOOTINFO_RESP 2 +#define SSIP_WAKETEST_RESULT 3 +#define SSIP_START_TRANS 4 +#define SSIP_READY 5 +/* Payloads */ +#define SSIP_DATA_VERSION(data) ((data) & 0xff) +#define SSIP_LOCAL_VERID 1 +#define SSIP_WAKETEST_OK 0 +#define SSIP_WAKETEST_FAILED 1 +#define SSIP_PDU_LENGTH(data) (((data) >> 8) & 0xffff) +#define SSIP_MSG_ID(data) ((data) & 0xff) +/* Generic Command */ +#define SSIP_CMD(cmd, payload) (((cmd) << 28) | ((payload) & 0xfffffff)) +/* Commands for the control channel */ +#define SSIP_BOOTINFO_REQ_CMD(ver) \ + SSIP_CMD(SSIP_BOOTINFO_REQ, SSIP_DATA_VERSION(ver)) +#define SSIP_BOOTINFO_RESP_CMD(ver) \ + SSIP_CMD(SSIP_BOOTINFO_RESP, SSIP_DATA_VERSION(ver)) +#define SSIP_START_TRANS_CMD(pdulen, id) \ + SSIP_CMD(SSIP_START_TRANS, (((pdulen) << 8) | SSIP_MSG_ID(id))) +#define SSIP_READY_CMD SSIP_CMD(SSIP_READY, 0) +#define SSIP_SWBREAK_CMD SSIP_CMD(SSIP_SW_BREAK, 0) + +/* Main state machine states */ +enum { + INIT, + HANDSHAKE, + ACTIVE, +}; + +/* Send state machine states */ +enum { + SEND_IDLE, + WAIT4READY, + SEND_READY, + SENDING, + SENDING_SWBREAK, +}; + +/* Receive state machine states */ +enum { + RECV_IDLE, + RECV_READY, + RECEIVING, +}; + +/** + * struct ssi_protocol - SSI protocol (McSAAB) data + * @main_state: Main state machine + * @send_state: TX state machine + * @recv_state: RX state machine + * @waketest: Flag to follow wake line test + * @rxid: RX data id + * @txid: TX data id + * @txqueue_len: TX queue length + * @tx_wd: TX watchdog + * @rx_wd: RX watchdog + * @keep_alive: Workaround for SSI HW bug + * @lock: To serialize access to this struct + * @netdev: Phonet network device + * @txqueue: TX data queue + * @cmdqueue: Queue of free commands + * @cl: HSI client own reference + * @link: Link for ssip_list + * @tx_usecount: Refcount to keep track the slaves that use the wake line + * @channel_id_cmd: HSI channel id for command stream + * @channel_id_data: HSI channel id for data stream + */ +struct ssi_protocol { + unsigned int main_state; + unsigned int send_state; + unsigned int recv_state; + unsigned int waketest:1; + u8 rxid; + u8 txid; + unsigned int txqueue_len; + struct timer_list tx_wd; + struct timer_list rx_wd; + struct timer_list keep_alive; /* wake-up workaround */ + spinlock_t lock; + struct net_device *netdev; + struct list_head txqueue; + struct list_head cmdqueue; + struct hsi_client *cl; + struct list_head link; + atomic_t tx_usecnt; + int channel_id_cmd; + int channel_id_data; +}; + +/* List of ssi protocol instances */ +static LIST_HEAD(ssip_list); + +static void ssip_rxcmd_complete(struct hsi_msg *msg); + +static inline void ssip_set_cmd(struct hsi_msg *msg, u32 cmd) +{ + u32 *data; + + data = sg_virt(msg->sgt.sgl); + *data = cmd; +} + +static inline u32 ssip_get_cmd(struct hsi_msg *msg) +{ + u32 *data; + + data = sg_virt(msg->sgt.sgl); + + return *data; +} + +static void ssip_skb_to_msg(struct sk_buff *skb, struct hsi_msg *msg) +{ + skb_frag_t *frag; + struct scatterlist *sg; + int i; + + BUG_ON(msg->sgt.nents != (unsigned int)(skb_shinfo(skb)->nr_frags + 1)); + + sg = msg->sgt.sgl; + sg_set_buf(sg, skb->data, skb_headlen(skb)); + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + sg = sg_next(sg); + BUG_ON(!sg); + frag = &skb_shinfo(skb)->frags[i]; + sg_set_page(sg, frag->page.p, frag->size, frag->page_offset); + } +} + +static void ssip_free_data(struct hsi_msg *msg) +{ + struct sk_buff *skb; + + skb = msg->context; + pr_debug("free data: msg %p context %p skb %p\n", msg, msg->context, + skb); + msg->destructor = NULL; + dev_kfree_skb(skb); + hsi_free_msg(msg); +} + +static struct hsi_msg *ssip_alloc_data(struct ssi_protocol *ssi, + struct sk_buff *skb, gfp_t flags) +{ + struct hsi_msg *msg; + + msg = hsi_alloc_msg(skb_shinfo(skb)->nr_frags + 1, flags); + if (!msg) + return NULL; + ssip_skb_to_msg(skb, msg); + msg->destructor = ssip_free_data; + msg->channel = ssi->channel_id_data; + msg->context = skb; + + return msg; +} + +static inline void ssip_release_cmd(struct hsi_msg *msg) +{ + struct ssi_protocol *ssi = hsi_client_drvdata(msg->cl); + + dev_dbg(&msg->cl->device, "Release cmd 0x%08x\n", ssip_get_cmd(msg)); + spin_lock_bh(&ssi->lock); + list_add_tail(&msg->link, &ssi->cmdqueue); + spin_unlock_bh(&ssi->lock); +} + +static struct hsi_msg *ssip_claim_cmd(struct ssi_protocol *ssi) +{ + struct hsi_msg *msg; + + BUG_ON(list_empty(&ssi-> |