Merge tag 'hsi-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi into next

Pull HSI (High Speed Syncronous Interface) changes from Sebastian Reichel:
 "Please pull the following changes for the HSI subsystem, which I have
  taken over from Carlos Chinea <carlos.chinea@nokia.com>.

  The below patches have been worked on in the linux-omap mailinglist
  for 10 months and are well tested in linux-next (have been in there
  for more than two weeks) without any problems arising.  Apart from
  that potential regressions are very limited, because the subsystem is
  not yet used by any platform in the mainline kernel.

   - Add some documentation for the HSI subsystem

   - Add Device Tree support for the HSI subsystem

   - Add OMAP3 SSI driver (SSI is a legacy variant of HSI)

   - Add Nokia N900 Modem driver (without speech support for now)"

* tag 'hsi-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: Introduce Nokia N900 modem driver
  HSI: Introduce driver for SSI Protocol
  Documentation: DT: omap-ssi binding documentation
  HSI: Introduce OMAP SSI driver
  HSI: Add common DT binding for HSI client devices
  HSI: export method to (un)register clients
  HSI: Add channel resource support to HSI clients
  HSI: method to unregister clients from an hsi port
  HSI: hsi-char: fix driver for multiport scenarios
  MAINTAINERS: update HSI entry
  Documentation: HSI: Add some general description for the HSI subsystem

21 files changed, 4513 insertions, 19 deletions

diff --git a/Documentation/devicetree/bindings/hsi/client-devices.txt b/Documentation/devicetree/bindings/hsi/client-devices.txt
new file mode 100644
index 00000000000..104c9a3e57a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/client-devices.txt
@@ -0,0 +1,44 @@
+Each HSI port is supposed to have one child node, which
+symbols the remote device connected to the HSI port. The
+following properties are standardized for HSI clients:
+
+Required HSI configuration properties:
+
+- hsi-channel-ids:	A list of channel ids
+
+- hsi-rx-mode:		Receiver Bit transmission mode ("stream" or "frame")
+- hsi-tx-mode:		Transmitter Bit transmission mode ("stream" or "frame")
+- hsi-mode:		May be used instead hsi-rx-mode and hsi-tx-mode if
+			the transmission mode is the same for receiver and
+			transmitter
+- hsi-speed-kbps:	Max bit transmission speed in kbit/s
+- hsi-flow:		RX flow type ("synchronized" or "pipeline")
+- hsi-arb-mode:		Arbitration mode for TX frame ("round-robin", "priority")
+
+Optional HSI configuration properties:
+
+- hsi-channel-names:	A list with one name per channel specified in the
+			hsi-channel-ids property
+
+
+Device Tree node example for an HSI client:
+
+hsi-controller {
+	hsi-port {
+		modem: hsi-client {
+			compatible = "nokia,n900-modem";
+
+			hsi-channel-ids = <0>, <1>, <2>, <3>;
+			hsi-channel-names = "mcsaab-control",
+					    "speech-control",
+					    "speech-data",
+					    "mcsaab-data";
+			hsi-speed-kbps = <55000>;
+			hsi-mode = "frame";
+			hsi-flow = "synchronized";
+			hsi-arb-mode = "round-robin";
+
+			/* more client specific properties */
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/hsi/nokia-modem.txt b/Documentation/devicetree/bindings/hsi/nokia-modem.txt
new file mode 100644
index 00000000000..8a979780452
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/nokia-modem.txt
@@ -0,0 +1,57 @@
+Nokia modem client bindings
+
+The Nokia modem HSI client follows the common HSI client binding
+and inherits all required properties. The following additional
+properties are needed by the Nokia modem HSI client:
+
+Required properties:
+- compatible:		Should be one of
+      "nokia,n900-modem"
+- hsi-channel-names:	Should contain the following strings
+      "mcsaab-control"
+      "speech-control"
+      "speech-data"
+      "mcsaab-data"
+- gpios:		Should provide a GPIO handler for each GPIO listed in
+                        gpio-names
+- gpio-names:		Should contain the following strings
+      "cmt_apeslpx"
+      "cmt_rst_rq"
+      "cmt_en"
+      "cmt_rst"
+      "cmt_bsi"
+- interrupts:		Should be IRQ handle for modem's reset indication
+
+Example:
+
+&ssi_port {
+	modem: hsi-client {
+		compatible = "nokia,n900-modem";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <55000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
+			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
+			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en",
+			     "cmt_rst",
+			     "cmt_bsi";
+	};
+};
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
new file mode 100644
index 00000000000..f26625e4269
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
@@ -0,0 +1,97 @@
+OMAP SSI controller bindings
+
+OMAP Synchronous Serial Interface (SSI) controller implements a legacy
+variant of MIPI's High Speed Synchronous Serial Interface (HSI).
+
+Required properties:
+- compatible:		Should include "ti,omap3-ssi".
+- reg-names:		Contains the values "sys" and "gdd" (in this order).
+- reg:			Contains a matching register specifier for each entry
+			in reg-names.
+- interrupt-names:	Contains the value "gdd_mpu".
+- interrupts: 		Contains matching interrupt information for each entry
+			in interrupt-names.
+- ranges:		Represents the bus address mapping between the main
+			controller node and the child nodes below.
+- clock-names:		Must include the following entries:
+  "ssi_ssr_fck": The OMAP clock of that name
+  "ssi_sst_fck": The OMAP clock of that name
+  "ssi_ick": The OMAP clock of that name
+- clocks:		Contains a matching clock specifier for each entry in
+			clock-names.
+- #address-cells:	Should be set to <1>
+- #size-cells:		Should be set to <1>
+
+Each port is represented as a sub-node of the ti,omap3-ssi device.
+
+Required Port sub-node properties:
+- compatible:		Should be set to the following value
+			ti,omap3-ssi-port (applicable to OMAP34xx devices)
+- reg-names:		Contains the values "tx" and "rx" (in this order).
+- reg:			Contains a matching register specifier for each entry
+			in reg-names.
+- interrupt-parent	Should be a phandle for the interrupt controller
+- interrupts:		Should contain interrupt specifiers for mpu interrupts
+			0 and 1 (in this order).
+- ti,ssi-cawake-gpio:	Defines which GPIO pin is used to signify CAWAKE
+			events for the port. This is an optional board-specific
+			property. If it's missing the port will not be
+			enabled.
+
+Example for Nokia N900:
+
+ssi-controller@48058000 {
+	compatible = "ti,omap3-ssi";
+
+	/* needed until hwmod is updated to use the compatible string */
+	ti,hwmods = "ssi";
+
+	reg = <0x48058000 0x1000>,
+	      <0x48059000 0x1000>;
+	reg-names = "sys",
+		    "gdd";
+
+	interrupts = <55>;
+	interrupt-names = "gdd_mpu";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	ssi-port@4805a000 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805a000 0x800>,
+		      <0x4805a800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <67>,
+			     <68>;
+
+		ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+	}
+
+	ssi-port@4805a000 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805b000 0x800>,
+		      <0x4805b800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <69>,
+			     <70>;
+
+		status = "disabled"; /* second port is not used on N900 */
+	}
+}
diff --git a/Documentation/hsi.txt b/Documentation/hsi.txt
new file mode 100644
index 00000000000..6ac6cd51852
--- /dev/null
+++ b/Documentation/hsi.txt
@@ -0,0 +1,75 @@
+HSI - High-speed Synchronous Serial Interface
+
+1. Introduction
+~~~~~~~~~~~~~~~
+
+High Speed Syncronous Interface (HSI) is a fullduplex, low latency protocol,
+that is optimized for die-level interconnect between an Application Processor
+and a Baseband chipset. It has been specified by the MIPI alliance in 2003 and
+implemented by multiple vendors since then.
+
+The HSI interface supports full duplex communication over multiple channels
+(typically 8) and is capable of reaching speeds up to 200 Mbit/s.
+
+The serial protocol uses two signals, DATA and FLAG as combined data and clock
+signals and an additional READY signal for flow control. An additional WAKE
+signal can be used to wakeup the chips from standby modes. The signals are
+commonly prefixed by AC for signals going from the application die to the
+cellular die and CA for signals going the other way around.
+
++------------+                                 +---------------+
+|  Cellular  |                                 |  Application  |
+|    Die     |                                 |      Die      |
+|            | - - - - - - CAWAKE - - - - - - >|               |
+|           T|------------ CADATA ------------>|R              |
+|           X|------------ CAFLAG ------------>|X              |
+|            |<----------- ACREADY ------------|               |
+|            |                                 |               |
+|            |                                 |               |
+|            |< - - - - -  ACWAKE - - - - - - -|               |
+|           R|<----------- ACDATA -------------|T              |
+|           X|<----------- ACFLAG -------------|X              |
+|            |------------ CAREADY ----------->|               |
+|            |                                 |               |
+|            |                                 |               |
++------------+                                 +---------------+
+
+2. HSI Subsystem in Linux
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In the Linux kernel the hsi subsystem is supposed to be used for HSI devices.
+The hsi subsystem contains drivers for hsi controllers including support for
+multi-port controllers and provides a generic API for using the HSI ports.
+
+It also contains HSI client drivers, which make use of the generic API to
+implement a protocol used on the HSI interface. These client drivers can
+use an arbitrary number of channels.
+
+3. hsi-char Device
+~~~~~~~~~~~~~~~~~~
+
+Each port automatically registers a generic client driver called hsi_char,
+which provides a charecter device for userspace representing the HSI port.
+It can be used to communicate via HSI from userspace. Userspace may
+configure the hsi_char device using the following ioctl commands:
+
+* HSC_RESET:
+ - flush the HSI port
+
+* HSC_SET_PM
+ - enable or disable the client.
+
+* HSC_SEND_BREAK
+ - send break
+
+* HSC_SET_RX
+ - set RX configuration
+
+* HSC_GET_RX
+ - get RX configuration
+
+* HSC_SET_TX
+ - set TX configuration
+
+* HSC_GET_TX
+ - get TX configuration
diff --git a/MAINTAINERS b/MAINTAINERS
index c496c311ffb..672b80aa236 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4204,9 +4204,11 @@ S:	Maintained
 F:	fs/hpfs/
 
 HSI SUBSYSTEM
-M:	Sebastian Reichel <sre@debian.org>
+M:	Sebastian Reichel <sre@kernel.org>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-hsi
+F:	Documentation/hsi.txt
 F:	drivers/hsi/
 F:	include/linux/hsi/
 F:	include/uapi/linux/hsi/
diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig
index d94e38dd80c..2c76de438eb 100644
--- a/drivers/hsi/Kconfig
+++ b/drivers/hsi/Kconfig
@@ -14,6 +14,7 @@ config HSI_BOARDINFO
 	bool
 	default y
 
+source "drivers/hsi/controllers/Kconfig"
 source "drivers/hsi/clients/Kconfig"
 
 endif # HSI
diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile
index 9d5d33f90de..360371e134f 100644
--- a/drivers/hsi/Makefile
+++ b/drivers/hsi/Makefile
@@ -3,4 +3,5 @@
 #
 obj-$(CONFIG_HSI_BOARDINFO)	+= hsi_boardinfo.o
 obj-$(CONFIG_HSI)		+= hsi.o
+obj-y				+= controllers/
 obj-y				+= clients/
diff --git a/drivers/hsi/clients/Kconfig b/drivers/hsi/clients/Kconfig
index 3bacd275f47..71b9f9ab86e 100644
--- a/drivers/hsi/clients/Kconfig
+++ b/drivers/hsi/clients/Kconfig
@@ -4,6 +4,23 @@
 
 comment "HSI clients"
 
+config NOKIA_MODEM
+	tristate "Nokia Modem"
+	depends on HSI && SSI_PROTOCOL
+	help
+	Say Y here if you want to add support for the modem on Nokia
+	N900 (Nokia RX-51) hardware.
+
+	If unsure, say N.
+
+config SSI_PROTOCOL
+	tristate "SSI protocol"
+	depends on HSI && PHONET && (OMAP_SSI=y || OMAP_SSI=m)
+	help
+	If you say Y here, you will enable the SSI protocol aka McSAAB.
+
+	If unsure, say N.
+
 config HSI_CHAR
 	tristate "HSI/SSI character driver"
 	depends on HSI
diff --git a/drivers/hsi/clients/Makefile b/drivers/hsi/clients/Makefile
index 327c0e27c8b..4d5bc0e0b27 100644
--- a/drivers/hsi/clients/Makefile
+++ b/drivers/hsi/clients/Makefile
@@ -2,4 +2,6 @@
 # Makefile for HSI clients
 #
 
-obj-$(CONFIG_HSI_CHAR)	+= hsi_char.o
+obj-$(CONFIG_NOKIA_MODEM)	+= nokia-modem.o
+obj-$(CONFIG_SSI_PROTOCOL)	+= ssi_protocol.o
+obj-$(CONFIG_HSI_CHAR)		+= hsi_char.o
diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c
index e61e5f991aa..57f70c28fa3 100644
--- a/drivers/hsi/clients/hsi_char.c
+++ b/drivers/hsi/clients/hsi_char.c
@@ -367,7 +367,7 @@ static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc)
 		return -EINVAL;
 	tmp = cl->rx_cfg;
 	cl->rx_cfg.mode = rxc->mode;
-	cl->rx_cfg.channels = rxc->channels;
+	cl->rx_cfg.num_hw_channels = rxc->channels;
 	cl->rx_cfg.flow = rxc->flow;
 	ret = hsi_setup(cl);
 	if (ret < 0) {
@@ -383,7 +383,7 @@ static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc)
 static inline void hsc_rx_get(struct hsi_client *cl, struct hsc_rx_config *rxc)
 {
 	rxc->mode = cl->rx_cfg.mode;
-	rxc->channels = cl->rx_cfg.channels;
+	rxc->channels = cl->rx_cfg.num_hw_channels;
 	rxc->flow = cl->rx_cfg.flow;
 }
 
@@ -402,7 +402,7 @@ static int hsc_tx_set(struct hsi_client *cl, struct hsc_tx_config *txc)
 		return -EINVAL;
 	tmp = cl->tx_cfg;
 	cl->tx_cfg.mode = txc->mode;
-	cl->tx_cfg.channels = txc->channels;
+	cl->tx_cfg.num_hw_channels = txc->channels;
 	cl->tx_cfg.speed = txc->speed;
 	cl->tx_cfg.arb_mode = txc->arb_mode;
 	ret = hsi_setup(cl);
@@ -417,7 +417,7 @@ static int hsc_tx_set(struct hsi_client *cl, struct hsc_tx_config *txc)
 static inline void hsc_tx_get(struct hsi_client *cl, struct hsc_tx_config *txc)
 {
 	txc->mode = cl->tx_cfg.mode;
-	txc->channels = cl->tx_cfg.channels;
+	txc->channels = cl->tx_cfg.num_hw_channels;
 	txc->speed = cl->tx_cfg.speed;
 	txc->arb_mode = cl->tx_cfg.arb_mode;
 }
@@ -435,7 +435,7 @@ static ssize_t hsc_read(struct file *file, char __user *buf, size_t len,
 		return -EINVAL;
 	if (len > max_data_size)
 		len = max_data_size;
-	if (channel->ch >= channel->cl->rx_cfg.channels)
+	if (channel->ch >= channel->cl->rx_cfg.num_hw_channels)
 		return -ECHRNG;
 	if (test_and_set_bit(HSC_CH_READ, &channel->flags))
 		return -EBUSY;
@@ -492,7 +492,7 @@ static ssize_t hsc_write(struct file *file, const char __user *buf, size_t len,
 		return -EINVAL;
 	if (len > max_data_size)
 		len = max_data_size;
-	if (channel->ch >= channel->cl->tx_cfg.channels)
+	if (channel->ch >= channel->cl->tx_cfg.num_hw_channels)
 		return -ECHRNG;
 	if (test_and_set_bit(HSC_CH_WRITE, &channel->flags))
 		return -EBUSY;
@@ -705,7 +705,7 @@ static int hsc_probe(struct device *dev)
 	if (!hsc_major) {
 		ret = alloc_chrdev_region(&hsc_dev, hsc_baseminor,
 						HSC_DEVS, devname);
-		if (ret > 0)
+		if (ret == 0)
 			hsc_major = MAJOR(hsc_dev);
 	} else {
 		hsc_dev = MKDEV(hsc_major, hsc_baseminor);
diff --git a/drivers/hsi/clients/nokia-modem.c b/drivers/hsi/clients/nokia-modem.c
new file mode 100644
index 00000000000..363b780dace
--- /dev/null
+++ b/drivers/hsi/clients/nokia-modem.c
@@ -0,0 +1,285 @@
+/*
+ * nokia-modem.c
+ *
+ * HSI client driver for Nokia N900 modem.
+ *
+ * Copyright (C) 2014 Sebastian Reichel <sre@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/hsi/hsi.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/hsi/ssi_protocol.h>
+
+static unsigned int pm;
+module_param(pm, int, 0400);
+MODULE_PARM_DESC(pm,
+	"Enable power management (0=disabled, 1=userland based [default])");
+
+struct nokia_modem_gpio {
+	struct gpio_desc	*gpio;
+	const char		*name;
+};
+
+struct nokia_modem_device {
+	struct tasklet_struct	nokia_modem_rst_ind_tasklet;
+	int			nokia_modem_rst_ind_irq;
+	struct device		*device;
+	struct nokia_modem_gpio	*gpios;
+	int			gpio_amount;
+	struct hsi_client	*ssi_protocol;
+};
+
+static void do_nokia_modem_rst_ind_tasklet(unsigned long data)
+{
+	struct nokia_modem_device *modem = (struct nokia_modem_device *)data;
+
+	if (!modem)
+		return;
+
+	dev_info(modem->device, "CMT rst line change detected\n");
+
+	if (modem->ssi_protocol)
+		ssip_reset_event(modem->ssi_protocol);
+}
+
+static irqreturn_t nokia_modem_rst_ind_isr(int irq, void *data)
+{
+	struct nokia_modem_device *modem = (struct nokia_modem_device *)data;
+
+	tasklet_schedule(&modem->nokia_modem_rst_ind_tasklet);
+
+	return IRQ_HANDLED;
+}
+
+static void nokia_modem_gpio_unexport(struct device *dev)
+{
+	struct nokia_modem_device *modem = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < modem->gpio_amount; i++) {
+		sysfs_remove_link(&dev->kobj, modem->gpios[i].name);
+		gpiod_unexport(modem->gpios[i].gpio);
+	}
+}
+
+static int nokia_modem_gpio_probe(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct nokia_modem_device *modem = dev_get_drvdata(dev);
+	int gpio_count, gpio_name_count, i, err;
+
+	gpio_count = of_gpio_count(np);
+
+	if (gpio_count < 0) {
+		dev_err(dev, "missing gpios: %d\n", gpio_count);
+		return gpio_count;
+	}
+
+	gpio_name_count = of_property_count_strings(np, "gpio-names");
+
+	if (gpio_count != gpio_name_count) {
+		dev_err(dev, "number of gpios does not equal number of gpio names\n");
+		return -EINVAL;
+	}
+
+	modem->gpios = devm_kzalloc(dev, gpio_count *
+				sizeof(struct nokia_modem_gpio), GFP_KERNEL);
+	if (!modem->gpios) {
+		dev_err(dev, "Could not allocate memory for gpios\n");
+		return -ENOMEM;
+	}
+
+	modem->gpio_amount = gpio_count;
+
+	for (i = 0; i < gpio_count; i++) {
+		modem->gpios[i].gpio = devm_gpiod_get_index(dev, NULL, i);
+		if (IS_ERR(modem->gpios[i].gpio)) {
+			dev_err(dev, "Could not get gpio %d\n", i);
+			return PTR_ERR(modem->gpios[i].gpio);
+		}
+
+		err = of_property_read_string_index(np, "gpio-names", i,
+						&(modem->gpios[i].name));
+		if (err) {
+			dev_err(dev, "Could not get gpio name %d\n", i);
+			return err;
+		}
+
+		err = gpiod_direction_output(modem->gpios[i].gpio, 0);
+		if (err)
+			return err;
+
+		err = gpiod_export(modem->gpios[i].gpio, 0);
+		if (err)
+			return err;
+
+		err = gpiod_export_link(dev, modem->gpios[i].name,
+							modem->gpios[i].gpio);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int nokia_modem_probe(struct device *dev)
+{
+	struct device_node *np;
+	struct nokia_modem_device *modem;
+	struct hsi_client *cl = to_hsi_client(dev);
+	struct hsi_port *port = hsi_get_port(cl);
+	int irq, pflags, err;
+	struct hsi_board_info ssip;
+
+	np = dev->of_node;
+	if (!np) {
+		dev_err(dev, "device tree node not found\n");
+		return -ENXIO;
+	}
+
+	modem = devm_kzalloc(dev, sizeof(*modem), GFP_KERNEL);
+	if (!modem) {
+		dev_err(dev, "Could not allocate memory for nokia_modem_device\n");
+		return -ENOMEM;
+	}
+	dev_set_drvdata(dev, modem);
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq < 0) {
+		dev_err(dev, "Invalid rst_ind interrupt (%d)\n", irq);
+		return irq;
+	}
+	modem->nokia_modem_rst_ind_irq = irq;
+	pflags = irq_get_trigger_type(irq);
+
+	tasklet_init(&modem->nokia_modem_rst_ind_tasklet,
+			do_nokia_modem_rst_ind_tasklet, (unsigned long)modem);
+	err = devm_request_irq(dev, irq, nokia_modem_rst_ind_isr,
+				IRQF_DISABLED | pflags, "modem_rst_ind", modem);
+	if (err < 0) {
+		dev_err(dev, "Request rst_ind irq(%d) failed (flags %d)\n",
+								irq, pflags);
+		return err;
+	}
+	enable_irq_wake(irq);
+
+	if(pm) {
+		err = nokia_modem_gpio_probe(dev);
+		if (err < 0) {
+			dev_err(dev, "Could not probe GPIOs\n");
+			goto error1;
+		}
+	}
+
+	ssip.name = "ssi-protocol";
+	ssip.tx_cfg = cl->tx_cfg;
+	ssip.rx_cfg = cl->rx_cfg;
+	ssip.platform_data = NULL;
+	ssip.archdata = NULL;
+
+	modem->ssi_protocol = hsi_new_client(port, &ssip);
+	if (!modem->ssi_protocol) {
+		dev_err(dev, "Could not register ssi-protocol device\n");
+		goto error2;
+	}
+
+	err = device_attach(&modem->ssi_protocol->device);
+	if (err == 0) {
+		dev_err(dev, "Missing ssi-protocol driver\n");
+		err = -EPROBE_DEFER;
+		goto error3;
+	} else if (err < 0) {
+		dev_err(dev, "Could not load ssi-protocol driver (%d)\n", err);
+		goto error3;
+	}
+
+	/* TODO: register cmt-speech hsi client */
+
+	dev_info(dev, "Registered Nokia HSI modem\n");
+
+	return 0;
+
+error3:
+	hsi_remove_client(&modem->ssi_protocol->device, NULL);
+error2:
+	nokia_modem_gpio_unexport(dev);
+error1:
+	disable_irq_wake(modem->nokia_modem_rst_ind_irq);
+	tasklet_kill(&modem->nokia_modem_rst_ind_tasklet);
+
+	return err;
+}
+
+static int nokia_modem_remove(struct device *dev)
+{
+	struct nokia_modem_device *modem = dev_get_drvdata(dev);
+
+	if (!modem)
+		return 0;
+
+	if (modem->ssi_protocol) {
+		hsi_remove_client(&modem->ssi_protocol->device, NULL);
+		modem->ssi_protocol = NULL;
+	}
+
+	nokia_modem_gpio_unexport(dev);
+	dev_set_drvdata(dev, NULL);
+	disable_irq_wake(modem->nokia_modem_rst_ind_irq);
+	tasklet_kill(&modem->nokia_modem_rst_ind_tasklet);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id nokia_modem_of_match[] = {
+	{ .compatible = "nokia,n900-modem", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, nokia_modem_of_match);
+#endif
+
+static struct hsi_client_driver nokia_modem_driver = {
+	.driver = {
+		.name	= "nokia-modem",
+		.owner	= THIS_MODULE,
+		.probe	= nokia_modem_probe,
+		.remove	= nokia_modem_remove,
+		.of_match_table = of_match_ptr(nokia_modem_of_match),
+	},
+};
+
+static int __init nokia_modem_init(void)
+{
+	return hsi_register_client_driver(&nokia_modem_driver);
+}
+module_init(nokia_modem_init);
+
+static void __exit nokia_modem_exit(void)
+{
+	hsi_unregister_client_driver(&nokia_modem_driver);
+}
+module_exit(nokia_modem_exit);
+
+MODULE_ALIAS("hsi:nokia-modem");
+MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
+MODULE_DESCRIPTION("HSI driver module for Nokia N900 Modem");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hsi/clients/ssi_protocol.c b/drivers/hsi/clients/ssi_protocol.c
new file mode 100644
index 00000000000..ce4be3738d4
--- /dev/null
+++ b/drivers/hsi/clients/ssi_protocol.c
@@ -0,0 +1,1191 @@
+/*
+ * ssi_protocol.c
+ *
+ * Implementation of the SSI McSAAB improved protocol.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel <sre@kernel.org>
+ *
+ * Contact: Carlos Chinea <carlos.chinea@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/if_phonet.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/notifier.h>
+#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/hsi/hsi.h>
+#include <linux/hsi/ssi_protocol.h>
+
+void ssi_waketest(struct hsi_client *cl, unsigned int enable);
+
+#define SSIP_TXQUEUE_LEN	100
+#define SSIP_MAX_MTU		65535
+#define SSIP_DEFAULT_MTU	4000
+#define PN_MEDIA_SOS		21
+#define SSIP_MIN_PN_HDR		6	/* FIXME: Revisit */
+#define SSIP_WDTOUT		2000	/* FIXME: has to be 500 msecs */
+#define SSIP_KATOUT		15	/* 15 msecs */
+#define SSIP_MAX_CMDS		5 /* Number of pre-allocated commands buffers */
+#define SSIP_BYTES_TO_FRAMES(x) ((((x) - 1) >> 2) + 1)
+#define SSIP_CMT_LOADER_SYNC	0x11223344
+/*
+ * SSI protocol command definitions
+ */
+#define SSIP_COMMAND(data)	((data) >> 28)
+#define SSIP_PAYLOAD(data)	((data) & 0xfffffff)
+/* Commands */
+#define SSIP_SW_BREAK		0
+#define SSIP_BOOTINFO_REQ	1
+#define SSIP_BOOTINFO_RESP	2
+#define SSIP_WAKETEST_RESULT	3
+#define SSIP_START_TRANS	4
+#define SSIP_READY		5
+/* Payloads */
+#define SSIP_DATA_VERSION(data)	((data) & 0xff)
+#define SSIP_LOCAL_VERID	1
+#define SSIP_WAKETEST_OK	0
+#define SSIP_WAKETEST_FAILED	1
+#define SSIP_PDU_LENGTH(data)	(((data) >> 8) & 0xffff)
+#define SSIP_MSG_ID(data)	((data) & 0xff)
+/* Generic Command */
+#define SSIP_CMD(cmd, payload)	(((cmd) << 28) | ((payload) & 0xfffffff))
+/* Commands for the control channel */
+#define SSIP_BOOTINFO_REQ_CMD(ver) \
+		SSIP_CMD(SSIP_BOOTINFO_REQ, SSIP_DATA_VERSION(ver))
+#define SSIP_BOOTINFO_RESP_CMD(ver) \
+		SSIP_CMD(SSIP_BOOTINFO_RESP, SSIP_DATA_VERSION(ver))
+#define SSIP_START_TRANS_CMD(pdulen, id) \
+		SSIP_CMD(SSIP_START_TRANS, (((pdulen) << 8) | SSIP_MSG_ID(id)))
+#define SSIP_READY_CMD		SSIP_CMD(SSIP_READY, 0)
+#define SSIP_SWBREAK_CMD	SSIP_CMD(SSIP_SW_BREAK, 0)
+
+/* Main state machine states */
+enum {
+	INIT,
+	HANDSHAKE,
+	ACTIVE,
+};
+
+/* Send state machine states */
+enum {
+	SEND_IDLE,
+	WAIT4READY,
+	SEND_READY,
+	SENDING,
+	SENDING_SWBREAK,
+};
+
+/* Receive state machine states */
+enum {
+	RECV_IDLE,
+	RECV_READY,
+	RECEIVING,
+};
+
+/**
+ * struct ssi_protocol - SSI protocol (McSAAB) data
+ * @main_state: Main state machine
+ * @send_state: TX state machine
+ * @recv_state: RX state machine
+ * @waketest: Flag to follow wake line test
+ * @rxid: RX data id
+ * @txid: TX data id
+ * @txqueue_len: TX queue length
+ * @tx_wd: TX watchdog
+ * @rx_wd: RX watchdog
+ * @keep_alive: Workaround for SSI HW bug
+ * @lock: To serialize access to this struct
+ * @netdev: Phonet network device
+ * @txqueue: TX data queue
+ * @cmdqueue: Queue of free commands
+ * @cl: HSI client own reference
+ * @link: Link for ssip_list
+ * @tx_usecount: Refcount to keep track the slaves that use the wake line
+ * @channel_id_cmd: HSI channel id for command stream
+ * @channel_id_data: HSI channel id for data stream
+ */
+struct ssi_protocol {
+	unsigned int		main_state;
+	unsigned int		send_state;
+	unsigned int		recv_state;
+	unsigned int		waketest:1;
+	u8			rxid;
+	u8			txid;
+	unsigned int		txqueue_len;
+	struct timer_list	tx_wd;
+	struct timer_list	rx_wd;
+	struct timer_list	keep_alive; /* wake-up workaround */
+	spinlock_t		lock;
+	struct net_device	*netdev;
+	struct list_head	txqueue;
+	struct list_head	cmdqueue;
+	struct hsi_client	*cl;
+	struct list_head	link;
+	atomic_t		tx_usecnt;
+	int			channel_id_cmd;
+	int			channel_id_data;
+};
+
+/* List of ssi protocol instances */
+static LIST_HEAD(ssip_list);
+
+static void ssip_rxcmd_complete(struct hsi_msg *msg);
+
+static inline void ssip_set_cmd(struct hsi_msg *msg, u32 cmd)
+{
+	u32 *data;
+
+	data = sg_virt(msg->sgt.sgl);
+	*data = cmd;
+}
+
+static inline u32 ssip_get_cmd(struct hsi_msg *msg)
+{
+	u32 *data;
+
+	data = sg_virt(msg->sgt.sgl);
+
+	return *data;
+}
+
+static void ssip_skb_to_msg(struct sk_buff *skb, struct