aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2020-03-12target: add examine-fail eventTomas Vanek
A configuration script may want to check the reason why examine fails e.g. device has security lock engaged. tcl/target/kx.cfg and klx.cfg is modified to use the new event for testing of the security lock of Kinetis MCU Change-Id: Id1d3a79d24e84b513f4ea35586cd2ab0437ff9b3 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4289 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-03-12Add target config for STM8S103 chip...Anton V. Kirilchik
Change-Id: I693e5b7933fc61956010a96be57ee6eb8abd3c31 Signed-off-by: Anton V. Kirilchik <kosmonaffft@gmail.com> Reviewed-on: http://openocd.zylin.com/5422 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-03-09tcl/target: Unify Renesas R-Car JTAG reset configMarek Vasut
Both Gen2 and Gen3 used the same init_reset{} implementation, pull it into common file and include it from both generations. Moreover, this behavior is SoC specific, not board specific, so move the common init_reset into target/ directory. Change-Id: I5489a4bff9a786da8cb7fd7a515b0c9ce9dc16e3 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5400 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-07bluenrg-x: simplyfied the driverluca vinci
Adopted only fast algorithm for flash programming: - write_word and write_byte methods have been removed. - start and end write alignments have been defined. Moved flash controller registers offsets in a common file shared with the flash algorithm. - the flash base address is passed to the flash algorithm as a parameter. Removed unused functions Change-Id: I80aeab3994e477044bbcf02e66d9525dae0cb491 Signed-off-by: luca vinci <luca.vinci@st.com> Reviewed-on: http://openocd.zylin.com/5393 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Michele Sardo <msmttchr@gmail.com>
2020-03-07bluenrg-x: added support for BlueNRG-LP deviceluca vinci
Extended bluenrg-x flash driver with BlueNRG-LP flash controller. Changes include: - register set for the flash controller - made software structure prone to support more easily future devices - updated target config file Change-Id: I2e2dc70db32cf98c62e3a43f2e44a4600a25ac5b Signed-off-by: luca vinci <luca.vinci@st.com> Reviewed-on: http://openocd.zylin.com/5343 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-03-03tcl/target: Drop old Renesas Gen2 SoC configsMarek Vasut
Drop old Renesas Gen2 SoC configurations, as they were superseded by the new unified config. Change-Id: I7c2ccbdc13b01a552ce9cafdc1538f226beaa9f2 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5399 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02tcl/target: Switch Renesas R-Car Gen2 boards to new configMarek Vasut
Switch Renesas R-Car Gen2 boards which are currently supported from the old ad-hoc SoC configuration to the new unified configuration. Change-Id: I8a67bceb3ae92d840ae4dbac20868c75e83f7d58 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5398 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02tcl/target: Add unified config for Renesas R-Car Gen2 targetsMarek Vasut
Add configuration for the Renesas R-Car Generation 2 targets. These are SoCs with Cortex A15s and A7s. All cores currently supported by OpenOCD are supported here as well as two new cores, M2N and V2H, for the sake of support completeness. Change-Id: Ib6fe70a91360b4f8bd69822ee28b6dea530cfa0a Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5397 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02tcl/target: Abort on invalid SoC selection on R-Car Gen3Marek Vasut
Instead of printing error message and continue, abort on invalid SoC selection right away. Change-Id: I9c7a7111b590c6c49a0826562380b881a162a8dc Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5439 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-24coding style: add newline at end of text filesAntonio Borneo
Some text file is missing newline at EOF. Add it. Change-Id: Ieebc790096f40961283c644642e56fde975e957f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5167 Tested-by: jenkins
2020-02-23tcl/board: update ST NUCLEO-H745ZI-Q configuration file to use dapdirectTarek BOCHKATI
this board embeds and STLINK DAP capable firmware Change-Id: I276e9f44ad6cf7d1ff664898bbc884676bdbc967 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5316 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-23tcl/board: Add imx8mp-evkLeonard Crestez
Board includes an internal adapter (interface/ftdi/imx8mp-evk.cfg) and a standard external ARM-10 connector. Change-Id: Ibb301011665b1edfb95be1213d8100143f6839dd Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5427 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23tcl/interface/ftdi: Add imx8mp-evk internal JTAG interfaceLeonard Crestez
The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-15Include start-of-region addressPiotr Kasprzyk
When $ADDRESS == $BASE that address used to be excluded. After this commit $ADDRESS == $BASE is within the range. Now the rule for "iswithin" is: $BASE <= $ADDRESS < ($BASE + $LEN) Thanks to Antonio Borneo <borneo.antonio@gmail.com> for noticing this. Change-Id: I74373c6010e069372d886fa7ecd8120892616834 Signed-off-by: Piotr Kasprzyk <ciri@ciri.pl> Reviewed-on: http://openocd.zylin.com/4799 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-08tcl: Remove executable bitMarc Schink
Change-Id: Ib452435b13c3cb8d14453d983151936238b9601d Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5419 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-06tcl: fix remaining scripts after rework adapter commandsAntonio Borneo
Some script have been added or modified after the patches for reworking the adapter commands were pushed in gerrit. Such scripts use the old command syntax and trigger a "deprecated" warning at runtime. Fix them with the same sed commands used for the other scripts: sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Change-Id: I0824d6c506a9af3eb9129b74c02a92b4eb1b100d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5424 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins
2020-02-06tcl: Add interface config for isodebug isolated JTAG/SWD+UARTAndreas Fritiofson
Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-01-29tcl: replace the deprecated commands with "adapter ..."Antonio Borneo
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-29tcl: replace command "interface" with "adapter driver"Antonio Borneo
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with command sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) Change-Id: I2291dfb96e164beecbeb3366ce83f9df2ad6c197 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5283 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-27tcl/board: Add config for STM32WB Nucleo boardMarc Schink
Change-Id: Ic29802306c706bcf3e261c60facd01d101c9e1ce Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5358 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Ilya Kharin <akscram@gmail.com>
2020-01-16flash/nor: add support of STM32WB on top STM32L4 flash driverTarek BOCHKATI
Change-Id: I9fb6700085d817d35a691f6484193f67939a4e0f Signed-off-by: Laurent LEMELE <laurent.lemele@st.com> Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/4933 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-14stlink: add DAP direct driverAntonio Borneo
STLINK-V3 and the new firmware V2J24 for ST-LINK/V2 provide API to directly access the DAP registers. This mode permits to use the native target in cortex_m.c, with no need to override it with the target in hla_target.c. Other advantages wrt HLA are: support for Cortex-A cores, support for SoC multi-core and/or multi AP, support for OpenOCD commands "dap" thus including control of CSW. This obsoletes the existing HLA driver for ST-Link, that should anyway be kept for those cases where it's not possible to update the ST-Link firmware. This commit introduces the minimal implementation for direct DAP access. The implementation is much slower than the HLA because every memory transfer requires several USB packets. Further commits will close the performance gap. The whole ST-Link driver is compiled under BUILD_HLADAPTER, to remove the need to split the driver between the two modes. This has to be reworked, but it's quite invasive! A new interface file stlink-dap.cfg is added and should be used in place of stlink.cfg to enable the DAP mode. Documentation is updated and reports limitation on the maximum AP number that can be accessed by ST-Link for some firmware already tested. Change-Id: I932ffe16bc81d00b1fe489e2944fda13470cce9b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4904 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-02tcl: update scripts after "jtag_reset" got deprecatedAntonio Borneo
Avoid annoying "deprecated" messages in the scripts distributed with OpenOCD code. Change-Id: I82d27cd420db30f0653efbd286a627ef56a8c1fd Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5287 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-02tcl/target: swm050: fix to allow to use with ST-LinkIcenowy Zheng
Currently the code assumes the adapter uses raw SWD, and the expected ID code of the CPU is even wrong. An adapter speed is also not specified. All these prevents the config file to be used with ST-Link. Fix the config file, to allow it to be used with ST-Link. Change-Id: I1244320fabfe8ee23da5a56a592dbeddc72cc8d5 Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-on: http://openocd.zylin.com/5297 Tested-by: jenkins Reviewed-by: Caleb Szalacinski <contact@skiboy.net> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-12-07target/stm32h7x: add support of dual core variant of STM32H7Tarek BOCHKATI
STM32H7x7 and STM32H7x5 devices contains two cores : CM7 + CM4 The second core creation is only done when * DUAL_CORE variable is set to true * non HLA interface is used A second check for the second core existence is done in cpu1 examine-end Once the second core is detected it gets examined. Furthermore, the script provides a configurable CTI usage in order to halt the cores simultaneously. Tested on Rev X and V devices. PS: the indentation was a mix of spaces and tabs, all changed to tabs. Change-Id: Iad9c30826965ddb9be5dee628bc2e63f953bbcb8 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5130 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-11-27target/stm32h7x: Use AP2 to access DBGMCU when non HLA adapter is usedChristopher Head
The STM32H7 has three access ports. The DBGMCU component is available through AP0 at 0x5C001000 and through AP2 at 0xE00E1000. Using the latter is preferable for early configuration because it works in all power states and while SRST is asserted, whereas the former does not. Change-Id: Iaf8f01d769efb6655040060a8e1e951e1f7e50ab Signed-off-by: Christopher Head <chead@zaber.com> Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/4742 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-10-18Fix wrong end-of-region calculationPiotr Kasprzyk
Correct check for end-of-region is: $BASE + $LEN > $ADDRESS And it is currently (wrongly) calculated as: $ADDRESS > $BASE - $LEN Change-Id: If10bfee19b0c7dbc085731ac1eda943f5d8a36a3 Signed-off-by: Piotr Kasprzyk <ciri@ciri.pl> Reviewed-on: http://openocd.zylin.com/4798 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2019-10-18tcl/target: Add Infineon TLE987xAndreas Färber
Prepare a config for Infineon TLE9879. Change-Id: Ic667ae822fd514cac365993bc3f39b4185f1a118 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/4339 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-10-18stm32l0|l1: don't corrupt RCC registersFelipe Balbi
instead of overwriting Reset settings, let's read-modify-write RCC registers. Change-Id: I21b7e26e6007d3c3d73803c681c980c6947f5910 Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-on: http://openocd.zylin.com/3601 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2019-10-15Update FTDI C232HM cfg, and add two new cfgs from cable modem researchAl Dyrius
Change-Id: Idbeffcd5ff4380b1e7c9fd5ef6ba3ca77cc22d99 Signed-off-by: Al Dyrius <aldyrius42@gmail.com> Reviewed-on: http://openocd.zylin.com/5307 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-09-20tcl/board: Add Rigado BMD-300 Evaluation KitMarc Schink
Change-Id: Iba8e12818e2041e51214dab413eb57f0e5bf3f75 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/5218 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2019-09-08flash/nor: flash driver for Synwit SWM050 MCUsCaleb Szalacinski
SWM050 is a series of MCU product by Foshan Synwit Tech, which is available in TSSOP-8 or SSOP-16 packages. Adds flash driver for the internal 8KiB flash of the MCU. The registers are based on reverse engineering the J-Flash blob provided by the vendor. Also adds a pre-made cfg file. Change-Id: I0b29f0c0d062883542ee743e0750a4c6b6609ebd Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Caleb Szalacinski <contact@skiboy.net> Reviewed-on: http://openocd.zylin.com/4927 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-06-19tcl/board: Add SAML11 Xplained Pro Evaluation KitMarc Schink
Change-Id: I118929cdecd9ba1f39d6e2791c114ac7e347b3f5 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/5206 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-06-19tcl/target: Add initial Microchip SAML1x supportMarc Schink
There is not flash bank support at the moment. Change-Id: I833c009d9d21cdeb70b57d67eb557d50ed0fb4de Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/5205 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-06-19Configs for ARM corelink SSE-200 target and Musca A boardOmair Javaid
This patch adds configuration files for ARM CoreLink SSE-200 SoCs. Also adds configuration file for SSE-200 based Musca A board. Flash programming support for Musca A QSPI flash is still not functional. This configuration will be updated once that support lands into OpenOCD. Please refer to ARM documentation for more information about SSE-200 and Musca A. Change-Id: Id3783c34d6e2609d659ef91c0bf7252c39439874 Signed-off-by: Omair Javaid <omair.javaid@linaro.org> Reviewed-on: http://openocd.zylin.com/5006 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-05-23stm32f7x: Use CHIPNAME-specific name for ITCM bankChristopher Head
Change-Id: Icf67eaecd56ac3fb88bcfa2b7084b846109454e6 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5102 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2019-05-20tcl/target: Fix V3M/V3H SoC chipnameMarek Vasut
The V3M SoC is R8A77970 while the V3H SoC is R8A77980 . Update the CHIPNAME and swap the SoCs to keep the list sorted. Change-Id: I7e1777c0c7181e5e0beac98333f2047cb443d0df Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5140 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-05-20tcl/target: Add Renesas RZ/A1H targetMarek Vasut
Add configuration for the Renesas RZ/A1H target. This is an SoC with one Cortex A9 ARMv7a core and up to 10 MiB of on-SoC SRAM. Change-Id: I20fd54b385fe1ba1cc325451c3fdfa3a835d4884 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5141 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-05-20tcl/board: Add Renesas RZ/A1H GR-Peach boardMarek Vasut
Add configuration for the Renesas RZ/A1H GR-Peach board, which is a cheap development kit for the RZ/A1H SoC. Change-Id: I7f5596ae47e6dff8e6d06cffd4dddca20f57d0ca Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5142 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-05-14tcl/psoc4: remove "ocd_" prefixed commandsAntonio Borneo
The commands prefixed with "ocd_" are removed. Remove them from configuration files. Change-Id: Ib44627ee17a39f3d06b479507ab5a025073bf9a8 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5090 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2019-04-24target/imx8m: Cleanup defaultsLeonard Crestez
* Add mem_ap for direct access to axi bus (without halting cpu) * Mark m4 core with -defer-examine because it's not used by default * Make a53.0 default target since it's the boot core Change-Id: Id031533c5d4af346eb08a9ac2532fa1bca602913 Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5036 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-24target/imx6ul: Initial supportLeonard Crestez
Unlike the rest of imx6 the 6UL 6ULL 6ULZ chips are based on Cortex-A7 which is at a different address so a custom script is required. Tested on imx6ull-14x14-evk Change-Id: I72822d2241045c318389fadbc66d7aaabaaf4cb5 Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5040 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-24target/imx6sx: Initial supportLeonard Crestez
Unlike the rest of imx6 a Cortex-M4 was added with a second CoreSight DAP so a separate script is required. Tested on imx6sx-sdb running linux Change-Id: I1561910b233015f42508f341175822c0827655ec Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5041 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-24target/imx7ulp: Initial supportLeonard Crestez
Unlike imx7d/solo supported by imx7.cfg the M4 core is on a different AP and is always running by default so no -defer-examine is required. There is also only one Cortex-A7 Tested on imx7ulp-evk Change-Id: Ifa923d1b9a372c788e6654bc2233fd4d9073a32d Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5043 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-24tcl/board: Add config for the Amazon Kindle 2 and DXAlexander Kurz
Add a config to access the Amazon Kindle Model No. D00701 and D00801. Both ebook readers are based on a Freescale i.MX31. A JTAG interface is included in a 40 pin FFC connector marked "J9" on both variants. Change-Id: I58bb1ded3d6706bc3798af488ca8bafb7dc45225 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3956 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-10target/imx6: Update list of supported TAPIDsLeonard Crestez
Copy all SJC TAPIPs from imx6 reference manuals. Some imx6 chips are based on Cortex-A7 or have an additional Cortex-M4 and need separate scripts. Change-Id: I3b07d94058c2c5e6313cfc8bb43134a90682a62e Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5034 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-10target/imx6: Fix indentation in DAP_TAPID handlingLeonard Crestez
OpenOCD scripts are usually indented with 4 spaces but here there are 8. Change-Id: Iaad53e3b377d246d99119bb7bb5fd75d4422f564 Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5039 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-10target/imx6: Add -ignore-versionLeonard Crestez
Looking through imx6 manuals all of them claim that "In follow-on silicon revisions the ID value is subject to change by incrementing the first nibble". Handle this by passing -ignore-version to jtag newtap command. Change-Id: I7fc4779f9757d527ea20a5174a8c90f919580013 Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5031 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-10target/imx7: Add ahb mem_apLeonard Crestez
This allows bus access even when CPU is off. Change-Id: I2d5c5581cd0169aecb92ac7b610810988a8dcef4 Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5032 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-09topic: Remapped Flash over ITCM region in STM32F7x scriptRocco Marco Guglielmi
This patch remaps the Flash over ITCM region as virtual to ensure that any breakpoint placed in this area will be automatically set as an hardware breakpoint. This patch is a fix to a regression introduced with changes #4429. Change-Id: I03d46d8537ef06b33a3d4a2328274667c6481969 Signed-off-by: Rocco Marco Guglielmi <roccomarco.guglielmi@gmail.com> Reviewed-on: http://openocd.zylin.com/5097 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-21 21:47:15 +0000