tcl: update scripts after "jtag_reset" got deprecated

Avoid annoying "deprecated" messages in the scripts
distributed with OpenOCD code.

Change-Id: I82d27cd420db30f0653efbd286a627ef56a8c1fd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5287
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

6 files changed, 13 insertions, 13 deletions

diff --git a/tcl/board/openrd.cfg b/tcl/board/openrd.cfg
index db3cb032..7659b074 100644
--- a/tcl/board/openrd.cfg
+++ b/tcl/board/openrd.cfg
@@ -25,10 +25,10 @@ proc openrd_init { } {
 	# possible that initial tap examination failed.  So let's
 	# re-examine the target again here when nSRST is asserted which
 	# should then succeed.
-	jtag_reset 0 1
+	adapter assert srst
 	feroceon.cpu arp_examine
 	halt 0
-	jtag_reset 0 0
+	adapter deassert srst
 	wait_halt
 
 	arm mcr 15 0 0 1 0 0x00052078
diff --git a/tcl/board/renesas_gen2_common.cfg b/tcl/board/renesas_gen2_common.cfg
index 00fa777c..3e4579b9 100644
--- a/tcl/board/renesas_gen2_common.cfg
+++ b/tcl/board/renesas_gen2_common.cfg
@@ -4,10 +4,10 @@ reset_config trst_and_srst srst_nogate
 
 proc init_reset {mode} {
     # Assert both resets: equivalent to a power-on reset
-    jtag_reset 1 1
+    adapter assert trst assert srst
 
     # Deassert TRST to begin TAP communication
-    jtag_reset 0 1
+    adapter deassert trst assert srst
 
     # TAP should now be responsive, validate the scan-chain
     jtag arp_init
diff --git a/tcl/board/renesas_salvator-xs.cfg b/tcl/board/renesas_salvator-xs.cfg
index 1558a527..e6f4da33 100644
--- a/tcl/board/renesas_salvator-xs.cfg
+++ b/tcl/board/renesas_salvator-xs.cfg
@@ -12,10 +12,10 @@ reset_config trst_and_srst srst_nogate
 
 proc init_reset {mode} {
 	# Assert both resets: equivalent to a power-on reset
-	jtag_reset 1 1
+	adapter assert trst assert srst
 
 	# Deassert TRST to begin TAP communication
-	jtag_reset 0 1
+	adapter deassert trst assert srst
 
 	# TAP should now be responsive, validate the scan-chain
 	jtag arp_init
diff --git a/tcl/board/sheevaplug.cfg b/tcl/board/sheevaplug.cfg
index ff333ca7..0d21be37 100644
--- a/tcl/board/sheevaplug.cfg
+++ b/tcl/board/sheevaplug.cfg
@@ -25,10 +25,10 @@ proc sheevaplug_init { } {
 	# possible that initial tap examination failed.  So let's
 	# re-examine the target again here when nSRST is asserted which
 	# should then succeed.
-	jtag_reset 0 1
+	adapter assert srst
 	feroceon.cpu arp_examine
 	halt 0
-	jtag_reset 0 0
+	adapter deassert srst
 	wait_halt
 
 	arm mcr 15 0 0 1 0 0x00052078
diff --git a/tcl/target/pxa255.cfg b/tcl/target/pxa255.cfg
index 38624259..4b222de0 100644
--- a/tcl/target/pxa255.cfg
+++ b/tcl/target/pxa255.cfg
@@ -38,11 +38,11 @@ reset_config trst_and_srst separate srst_nogate
 # reset processing that works with PXA
 proc init_reset {mode} {
 	# assert both resets; equivalent to power-on reset
-	jtag_reset 1 1
+	adapter assert trst assert srst
 
 	# drop TRST after at least 32 cycles
 	sleep 1
-	jtag_reset 0 1
+	adapter deassert trst assert srst
 
 	# minimum 32 TCK cycles to wake up the controller
 	runtest 50
@@ -51,7 +51,7 @@ proc init_reset {mode} {
 	jtag arp_init
 
 	# ... and take it out of reset
-	jtag_reset 0 0
+	adapter deassert trst deassert srst
 }
 
 proc jtag_init {} {
diff --git a/tcl/test/syntax1.cfg b/tcl/test/syntax1.cfg
index 79d53848..5d013f07 100644
--- a/tcl/test/syntax1.cfg
+++ b/tcl/test/syntax1.cfg
@@ -5,8 +5,8 @@ jtag_ntrst_delay 200
 reset_config trst_and_srst srst_pulls_trst
 
 #LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
-jtag_reset 1 1
-jtag_reset 0 0
+adapter assert trst assert srst
+adapter deassert trst deassert srst
 
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)