aboutsummaryrefslogtreecommitdiff
path: root/src/jtag
AgeCommit message (Expand)Author
2015-04-24jtag/drivers/ti_icdi: do not segfault when adapter can't be openedPaul Fertser
2015-04-16configure the SWD frequency when setting adapter speed in SWD mode for versaloonSimon Qian
2015-04-16stlink_usb.c: Decode some more errors.Uwe Bonnes
2015-04-16cmsis-dap: print vendor and product id on open failureSpencer Oliver
2015-04-14jtag/startup.tcl: fix regression with autoselecting JTAGPaul Fertser
2015-04-14jtag/tcl: fix incorrect memcpy in jim_newtap_expected_idPaul Fertser
2015-04-14startup: Fixed measure_clk to return kHz instead of MHz.Ed Beroset
2015-04-14jtag/core: honour SRST timings in SWD modePaul Fertser
2015-03-25jtag/drivers/ftdi.c: removed memory leakMateusz Manowiecki
2015-03-25drivers/cmsis-dap: port to common SWD frameworkPaul Fertser
2015-03-25armv7m_trace, stlink: provide APIs to capture trace with an adapterPaul Fertser
2015-03-25armv7m: add generic trace support (TPIU, ITM, etc.)Paul Fertser
2015-03-09jlink: Add variant "J-Link Lite-XMC4000"Andreas Färber
2015-03-09jlink: Add variant "J-Link Lite-XMC4200"Andreas Färber
2015-03-09hla/hla_interface: call HLA layout API close() on quitPaul Fertser
2015-03-09stlink: avoid null pointer dereference in stlink_usb_close()Paul Fertser
2015-03-09jtag/drivers/buspirate: add JTAG_STABLECLOCKS cmdMateusz Manowiecki
2015-02-22Add SWD protocol support to sysfsgpioJean-Christian de Rivaz
2015-02-22Add SWD protocol support to bitbangJean-Christian de Rivaz
2015-02-11J-Link serial number config optionJoerg Fischer
2015-02-11jlink: Added hardware version number for JLink firmware on LPC-Link2Nemui Trinomius
2015-01-30drivers/stlink: clarify "init mode failed" messagePaul Fertser
2015-01-30jtag/drivers: remove useless checks causing build failure with clang 3.5.0Paul Fertser
2015-01-30Use (uint8_t *) for buf_(set|get)_u(32|64) instead of (void *)Paul Fertser
2015-01-28jtag: Rewrite TAP verification/auto-probe logicAndreas Fritiofson
2015-01-26jtag/drivers/cmsis-dap-usb: fix cmsis_dap_serialJaakko Kukkohovi
2015-01-26jtag/drivers/stlink: demote the output of available speeds to DEBUGPaul Fertser
2015-01-26jtag/hla_interface: avoid segfault with adapters that do not have configurabl...Paul Fertser
2015-01-15stlink: add reconfigurable speed supportSpencer Oliver
2015-01-15hla: add ability to change adapter speed (if supported)Spencer Oliver
2015-01-15jtag/hla: output possible idcode candidates in case of mismatchPaul Fertser
2015-01-15jtag: Avoid extra SRSTn resets when connectingEvan Hunter
2015-01-09swd: handle various failure conditionsPaul Fertser
2015-01-07jtag: Remove unnecessary global variableAndreas Fritiofson
2015-01-07jtag: Fix memory leaks in jtag_tap_free()Andreas Fritiofson
2014-11-24jtag/drivers/jlink: implement register command to fix SWDPaul Fertser
2014-10-16cmsis-dap: add serial number supportSpencer Oliver
2014-10-16cmsis-dap: refactor HID PID/VID check loopSpencer Oliver
2014-10-06libusb: introduce jtag_libusb_choose_interface() and use it for JLinkPaul Fertser
2014-10-06hla: add a way to pass arbitrary commands from user to layout and use for ICDIPaul Fertser
2014-10-06jtag/drivers/jlink.c: fix for LPC Link-2 running JLink firmware on LinuxAnders
2014-10-06jtag/drivers/libusb1_common: avoid device reset when reselecting configurationAnders
2014-10-06jtag: constify driver arraysSpencer Oliver
2014-09-29vsllink: improve the performance when using swdSimon Qian
2014-09-22mpsse: Display libusb error names instead of numbersJoakim Gebart
2014-09-22Support hla_serial command for ST-LINK adapters.Austin Phillips
2014-09-15jtag: drivers: stlink: remove unnecessary '\n' in LOG_* entriesAndrey Skvortsov
2014-09-08jtag/drivers/libusb0_common: fix FTBFS (libusb_device_descriptor error)Paul Fertser
2014-08-22jtag: always configure enabled tap parameter appropriatelyPaul Fertser
2014-08-19jtag/drivers/ftdi: Use adapter_khz value for initial clock speed (was default...Angus Gratton
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 14:12:11 +0000