| Age | Commit message (Expand) | Author |
|---|
| 2015-12-29 | cortex_a: add 'dacrfixup' to cortex-a command group | Matthias Welwarsky |
| 2015-11-26 | Improve J-Link driver and introduce libjaylink. | Marc Schink |
| 2015-11-26 | niietcm4: support for NIIET's Cortex-M4 microcontrollers | Bogdan Kolbov |
| 2015-11-20 | at91samd: handle reset run/halt in DSU | Tomas Vanek |
| 2015-11-11 | flash: New driver for XMC4xxx microcontroller family | Jeff Ciesielski |
| 2015-11-10 | flash: driver for Atmel SAMV, SAMS, and SAME | Morgan Quigley |
| 2015-11-07 | Cortex A/R : Allow interrupt disable during single-step | Evan Hunter |
| 2015-11-07 | Documentation : Add missing commands for ARM-v7A & R | Evan Hunter |
| 2015-11-03 | helper/options: Use OPENOCD_SCRIPTS dir if set. | Jonathan Larmour |
| 2015-10-30 | docs: added note for increasing gdb remotetimeout when using the "gdb_port pi... | fenugrec |
| 2015-10-30 | doc: Fix sort order of flash drivers | Andreas Färber |
| 2015-09-05 | server: tcl_trace command | Austin Morton |
| 2015-08-06 | flash/nor/jtagspi: add JTAGSPI driver | Robert Jordens |
| 2015-08-06 | flash/nor/tcl: add read_bank and verify_bank | Robert Jordens |
| 2015-08-06 | cpld/virtex2: allow JSTART to be disabled | Robert Jordens |
| 2015-06-30 | manual: make it compatible with ancient texinfo versions that lack @raggedright | Paul Fertser |
| 2015-05-17 | docs: gdb_target_description defaults enabled | Karl Palsson |
| 2015-05-17 | manual: add missing usb blaster commands | Paul Fertser |
| 2015-05-17 | manual: fix usb_blaster_pin command syntax and description | Paul Fertser |
| 2015-05-17 | manual: reorder flash driver info | Paul Fertser |
| 2015-05-17 | manual: fix all overfull and underfull hboxes | Paul Fertser |
| 2015-05-17 | manual: remove the lists of config files | Paul Fertser |
| 2015-04-16 | flash/nor/mdr: add docs, remove memory leak on probe() | Paul Fertser |
| 2015-04-16 | docs: update OpenOCD url's to openocd.org domain | Spencer Oliver |
| 2015-04-16 | doc/openocd.texi: fix formatting for mrvlqspi driver documentation | Mahavir Jain |
| 2015-04-16 | rtos: add instructions and helper code to make FreeRTOS work again | Andreas Fritiofson |
| 2015-04-14 | AT91SAM4L: handle reset run/halt in SMAP | Tomas Vanek |
| 2015-04-14 | Tcl exception codes cleanup, shutdown command amendments | Paul Fertser |
| 2015-03-25 | doc: update RTOS section, add 'mqx' info | Marian Cingel |
| 2015-03-25 | transport: make 'transport select' auto-select the first available transport ... | Angus Gratton |
| 2015-03-25 | armv7m_trace, stlink: provide APIs to capture trace with an adapter | Paul Fertser |
| 2015-03-25 | armv7m: add generic trace support (TPIU, ITM, etc.) | Paul Fertser |
| 2015-03-09 | flash/nor/stellaris: allow to recover a locked device that can't be examined | Paul Fertser |
| 2015-03-09 | server: tcl_notifications command | Austin Morton |
| 2015-03-09 | lpc2000: Add LPC407x/8x flash size auto detection | Nemui Trinomius |
| 2015-02-22 | Remove long-deprecated "target count" and "target number" commands. | Robert P. J. Day |
| 2015-02-12 | doc: stellaris driver supports Tiva C too | Paul Fertser |
| 2015-02-12 | README, doc: add mrvlqspi flash driver information | Paul Fertser |
| 2015-02-12 | doc, README: mention all the variants supported by lpc2000 driver | Paul Fertser |
| 2015-02-11 | flash/startup: extend "program" command to accept "exit" | Paul Fertser |
| 2015-02-11 | sim3x: new flash driver for Silabs SiM3 microcontroller family | Andreas Bomholtz |
| 2015-02-11 | J-Link serial number config option | Joerg Fischer |
| 2015-02-11 | doc: document the OCL (on chip flash loader) driver | Paul Fertser |
| 2015-02-11 | psoc4: support for Cypress PSoC 41xx/42xx family | Tomas Vanek |
| 2015-02-04 | flash/nor/stm32lx: use 0 base to autodetect second bank location | Paul Fertser |
| 2015-02-04 | doc: add stm32lx mass_erase description | Paul Fertser |
| 2015-01-15 | docs: update bug tracker URL | Spencer Oliver |
| 2014-11-24 | doc: flash: write_image writes only loadable sections | Alexei Colin |
| 2014-10-16 | cmsis-dap: add serial number support | Spencer Oliver |
| 2014-10-06 | hla: add a way to pass arbitrary commands from user to layout and use for ICDI | Paul Fertser |
