aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-04x86_32_common: Fix typo in function nameAndreas Färber
pyhs -> phys Change-Id: Ie7edc74f1693b42f26e1e8475a93a7a6b9255cdd Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3672 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-10-04mips: Added #define for scan_delay legacy mode default valueKent Brinkley
Believe in using defines to make maintenance easier. Change-Id: I8edf151352131bbf2b884dfcd67ca5764b11b13c Signed-off-by: Kent Brinkley <jkbrinkley.imgtec@gmail.com> Reviewed-on: http://openocd.zylin.com/2350 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-10-04STM32L433 Flash supportPeter Kuhar
Added new chip id based flash size. Change-Id: I5b5e71074af0e50352443f66f88adfc6e14280bf Signed-off-by: Peter Kuhar <peter@pkuhar.com> Reviewed-on: http://openocd.zylin.com/3732 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-10-04stm32l4x: fix incorrect device id maskSpencer Oliver
Change-Id: I37cf9cbdd07dc3764d2c719b7c6ed5852aea3943 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/3799 Tested-by: jenkins
2016-08-14contrib/loaders: Enforce Little Endian ARM machine codeAndreas Färber
arm-none-eabi target triplet defaults to Little Endian, and so far any submitted machine code snippets have been verified to be Little Endian. However a user might override [ARM_]CROSS_COMPILE with an armeb toolchain, potentially resulting in invalid machine code. Let's be safe and enforce Little Endian mode for assembler and compiler. Change-Id: I9cefe24689eaded25d60ffb1f254b254e8d76f9d Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3498 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14flash Kinetis: Implement flash protection settingTomas Vanek
Kinetis family employs strange concept of Flash Configuration Field at address 0x400 of program flash. Writing incorrect data to FCF may permanently lock the device. The change introduces 'kinetis fcf_source protection' mode. In this mode write of flash image data to FCF is prevented. FCF data build from protection (set by 'flash protect' command) are written instead. FCF data are written also just after erase of relevant sector. It protects device from locking security by reset or power cycle after erase. prot_blocks array is used as protection blocks have bigger size than sectors. Alignment and padding programming sections is rewritten to fix writing with not section boundary aligned begin. Change-Id: I9fc8bd37d6f627fb8ed7abb7f7560e78a740b195 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3562 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-08-14pic32mx: add new device ID, 17x/27x Flash supportSASANO Takayoshi
- add new device ID: 170F256B, 170F256D, 270F256B, 270F256D, 330F064H, 330F064L, 430F064H, 430F064L, 350F128H, 350F128L, 450F128H, 450F128L, 350F256H, 350F256L, 450F256H, 450F256L, 370F512H, 370F512L, 470F512H, 470F512L - add support for PIC32MX17x/27x 256kB Flash Change-Id: I65a304d2114fff80de3a24c1f6d0b5e955b22531 Signed-off-by: SASANO Takayoshi <uaa@uaa.org.uk> Reviewed-on: http://openocd.zylin.com/3186 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-08-14flash Kinetis: refactoring ftfx commands and numerous minor changesTomas Vanek
Add kinetis_ftfx_decode_error() to show flash error type in human readable message. Add kinetis_ftfx_prepare() to prepare flash module just once in command (not each time kinetis_ftfx_command() is called). Change target_read/write_memory() to target_read/write_u8/32(). Make ftfx_fstat parameter of kinetis_ftfx_command() optional. Longword flash write: Fix huge memory leak after write of unaligned block. Check flash address alignment properly. Do not fill whole padding buffer but its end after original data. Remove duplicite padding. Change-Id: Ia5e312909f68d3cc724c8cbffe1cd903b9102124 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3561 Tested-by: jenkins Reviewed-by: Steven Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14flash/nor: implement protection blocks of different size than erase sectorTomas Vanek
Originally flash/nor infrastructure assumed protection blocks identical to erase sectors. This assumption is not valid for many flash types. Driver code fixed the problem either by increasing sector size to size of protection block or by defining more protection block than really existed in device. Both cases had drawbacks. The change retains compatibility with the old driver. Updated driver can set protection blocks table independent of sector table. Change-Id: I27f6d267528ad9ed9fe0a85f05436a8ec17603a4 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3545 Tested-by: jenkins Reviewed-by: Steven Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14flash Kinetis: dynamic status detection before starting mass_eraseTomas Vanek
The change prevents starting mass_erase in unstable state of MCU (RESET/WDOG loop). mass_erase of secured MCU using manual reset button is supported. Timeouts are measured by timeval_ms() instead of iteration count. mass_erase timeout prolonged to 16 seconds because aborting mass_erase in progress (deasserting reset) leaves the device in security locked state. Change-Id: I6605532df56080a54c2a1dfe49094e3db4ce534a Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3551 Tested-by: jenkins Reviewed-by: Steven Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14flash Kinetis: Detect RESET/WDOG loop, fix detection of secured MCUTomas Vanek
Kinetis driver checks MDM STAT register to detect secured state of MCU. Original version often reported a blank device as secured one. Change #3010 has not fixed all false reports. After changes in arm_adi_v5 infrastructure secured devices was not detected at all. New algorithm uses multiple MDM STAT reads and counts MDM_STAT_SYSSEC and MDM_STAT_FREADY bits. Both secured MCU and MCU locked-up in RESET/WDOG loop are detected reliably. Detection is run in both kx.cfg and klx.cfg from examine-start event, not examine-end as before. Event is configured only for non hla adapter. Minor fix in klx.cfg: commented out adapter_khz 24000 in reset-init. Such frequency is not supported in VLPR CPU mode and with JTAG. Change-Id: I2ec2b68c45bde9898159cd15fbdcbcfa538c41d9 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3547 Tested-by: jenkins Reviewed-by: Steven Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14kinetis: support mass erase on boards without SRSTSteven Stallion
NXP (nee Freescale) documents the mass erase procedure using the MDM-AP block in AN4835. Existing support for this feature did not properly handle boards without SRST. This patch updates the mass_erase command such that it works correctly on these boards. Additionally, the core is left in a halted state once complete to prevent reset loops due to the watchdog as reported by some users. Since the MDM-AP provides an additional method of halting and resetting the core that is disconnected from the DAP, additional commands are provided to manage this state. These commands are particularly helpful when connecting to a target with an unknown state. Change-Id: I40f006d5d964befb12b019c5d509988decdd3f91 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3540 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-08-14at91sam7: do not touch flash banks which belong to other targetsAndreas Fritiofson
at91sam7_read_part_info() walks throw all flash banks following current one. I don't know why it has to do it at all (possibly for multi-bank devices like SAM7S512), but if there is more than one target in JTAG chain, this lookup can touch flash bank of another (possibly not halted) target, which cause probe error and current command execution abort. [andreas.fritiofson@gmail.com]: Change to for-loop and reduce indentation Change-Id: Ide50e93578786e1250f7a0fd0e3d296247924814 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2610 Tested-by: jenkins
2016-08-14ftdi: Added a method to read the signal valuesStephen Tridgell
Change-Id: Ie32a372bbc57249b4802d900234a0e8e7d1d1830 Signed-off-by: Stephen Tridgell <stephen.tridgell@exablaze.com> Reviewed-on: http://openocd.zylin.com/2556 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-08-14cmsis-dap: add JTAG pass-through modeMatthias Welwarsky
This change adds JTAG transport in pass-through mode to the cmsis-dap driver. The patch is originally from Phillip Pearson <pp@myelin.co.nz>, with additions by Maksym Hilliaka <oter@frozen-team.com> Change-Id: I88d918d6576e9d875c3b611f29f255581e6a5424 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3568 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-08-14tcl/board: add Marsohod CPLD board configAntony Pavlov
Marsohod is a very cheap CPLD Development and Education board. Please see http://marsohod.org/howtostart/plata for details. Sample usage: openocd -f board/marsohod.cfg -c init -c "svf -tap epm240.tap project.svf" -c shutdown Change-Id: Ia8b7d46cbead15a2a41a2a4e68d7ff4f4ee3e88a Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/3608 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14tcl/cpld: add config file for Altera EPM240 CPLD (MAXII family)Antony Pavlov
Change-Id: I5e589cf9d1d762321b7baa2509a4e78688fe6512 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/3607 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14tcl/board: add Marsohod3 FPGA board configAntony Pavlov
Marsohod3 is a cheap FPGA Development and Education board. Please see http://www.marsohod.org/plata-marsokhod3 for details. Sample usage: openocd -f board/marsohod3.cfg -c init -c "svf -tap 10m50.tap project.svf" -c shutdown Change-Id: Ie5f43e696bbd1f3be2710c3916e808359f6e8d18 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/3606 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14tcl/fpga: add config file for Altera 10M50 FPGA (MAX10 family)Antony Pavlov
Change-Id: I1a9cfa14e5127226af4e4b4bf30e1b5d6feedc34 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/3605 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14tcl/board: add Marsohod2 FPGA board configAntony Pavlov
Marsohod2 is a very cheap FPGA Development and Education board. Please see http://www.marsohod.org/prodmarsohod2 for details. Sample usage: openocd -f board/marsohod2.cfg -c init -c "svf -tap ep3c10.tap project.svf" -c shutdown Change-Id: Ibf39a5d463eeda9d4031fa626f01ea2599396ff2 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2890 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-08-14interface: Add XDS100v3 support.Remco Bloemen
XDS100v3 is software compatible with the XDS100v2, but has a different usb pid. This commit adds `xds100v3.cfg` that sources the v2 one and changes the usb pid. Change-Id: Ie29d325e8992d2de2f97d70862beeb63932ffa80 Signed-off-by: Remco Bloemen <openocd-gerrit@xn--2-umb.com> Reviewed-on: http://openocd.zylin.com/3632 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14tcl/interface/ftdi: add config for the MBFTDI adapterAntony Pavlov
MBFTDI is a very cheap FT2232-based JTAG adapter for programming Marsohod FPGA board. Please see http://www.marsohod.org/prodmbftdi for details. Change-Id: I35f758b49d1566098dc27f9581829cccad93ceeb Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/3604 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14doc: correct and standardize instructions for disabling TCP serversPeter A. Bigot
The instructions to set the port to zero to disable a service has not worked for several years: the effect of doing so is to start the service on a port randomly selected by the bind(2) system call. Update the documentation to reflect the new standard way of disabling network services. Change-Id: Ic5315a80f9956ea195f63e05d30d604a980bbc8f Signed-off-by: Peter A. Bigot <pab@pabigot.com> Reviewed-on: http://openocd.zylin.com/3638 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14gdb_server: support disabling serverPeter A. Bigot
Although the documentation suggested this worked, and it is implemented for tcl_port and telnet_port, the directive was not recognized for gdb_port. Change-Id: I38d95ee879ec3f6d551603b7313749a21e0e498e Signed-off-by: Peter A. Bigot <pab@pabigot.com> Reviewed-on: http://openocd.zylin.com/3637 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14Flash handling for STM32F76x/77x and F446 addedAndreas Bolsch
- added ids for various parts - rewrite of sector allocation to deal with dual-bank F76x/77x - single- / dual-bank mode for F76x/77x - sector protection adapted for F76x/77x in dual-bank mode - handling of additional option bits (28-31) in FLASH_OPTCR in options_read and options_write for F42x/43x/469/479/7xx, options bits 0-1 masked out - check for sensible value of user_options in options_write - some #defines clarified, non-needed ones removed - docs updated (options read, options write) Change-Id: Ie4db80e60baa7d2663e024ab1f278640b1ce901b Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-on: http://openocd.zylin.com/3526 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14rtos: remove display_str memberSteven Stallion
This patch removes the display_str member in the thread_detail struct. This member was not being used and provides no additional benefit over the thread_name_str and extra_info_str members. This change is made in preparation of support for the qXfer:threads:read packet, which will modernize how thread information is shared with GDB. Change-Id: I1f8bc6325e6aa790e02ea6caee9d6f44c5fedf36 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3558 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-08-14target/stm32f4x.cfg: Add STM32F410/F412/F469.Uwe Bonnes
Taken from git://git.ac6.fr/openocd commit e8ed67c42227b7072a1e7 Change-Id: Iac106d4823123eaa96f16a975e7ecbcb24189924 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3377 Tested-by: jenkins Reviewed-by: Stian Skjelstad <stian@nixia.no> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14flash/nor/tcl.c: Less verbose output of flash erase_check.Uwe Bonnes
Only report non-erased or unknown sectors or if bank is fully erased. Change-Id: I94f0bc2a0d6529d1ea5f66b284cefd6a2c61fe39 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3501 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-08-14stm32l4: Handle failing flash_size read like on other devices.Uwe Bonnes
Change-Id: I54d7cd3a8c80d0e4663c3c09457a4ff338a6f1a0 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3503 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-08-14board: add configuration for freescale imx6q sabresd boardMatthias Welwarsky
This configuration file contains jtag, reset and init functions for the Freescale SabreSD board variant with iMX6Q SoC. Change-Id: I2366af6da1d82550eb485f36ad61469305c59ffb Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3357 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-08-13jlink: fix jlink regression introduced by ae8cdc commitSergey A. Borshch
1) wrong last bit was shifted out in the end of IRSHIFT/DRSHIFT in jlink_execute_scan() 2) TDI buffer was not cleared in jlink_tap_init(), results in wrong data shifted out to the TDI and "Bad value '00000000' captured during DR or IR scan" error message. 3) sizeof(tdi_buffer) was used in memset() to clean tms buffer. It is the same as sizeof(tms_buffer), but shoud be fixed to make source code consistent Change-Id: I13f26d1c3e88eefc3856fe2b8542fb0ccea6acb1 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on: http://openocd.zylin.com/3394 Tested-by: jenkins Reviewed-by: Harry Zhurov <harry.zhurov@gmail.com> Reviewed-by: Anton Gusev Reviewed-by: Михаил Цивинский <mtsivinsky@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-13tcl/target/stm32f4x.cfg: Use Workareasize of smallest possible device.Uwe Bonnes
Increase workareasize when it is know we have a larger device. Change-Id: Ieaee92e7cd25cc201989f14de122349698871412 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3378 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-13psoc4: Corrected Silicon IDsGeorge Ioakimedes
Corrected 2 Silicon IDs that were swapped. I've tested with a CY8C4125AXI-483 and confirmed that the device is recognized correctly now. Change-Id: I6fcbee33558d8feec9abf6052df3f15523379c48 Signed-off-by: George Ioakimedes <georgeioak@gmail.com> Reviewed-on: http://openocd.zylin.com/3619 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-08-13target: check late abort from target in async_algorithmTomas Vanek
target_run_flash_async_algorithm() ignored abort from target (rp set to 0) when raised after all data have been written in fifo. I could result e.g. in not reported error during flash write. The change adds rp test after target algorithm has finished. Change-Id: Iadd93371e4a4602737be10079479285d81ae41b2 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3560 Tested-by: jenkins Reviewed-by: Steven Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-13at91samd: Add Atmel SAMD09 family supportOlaf Lüke
Change-Id: I0ee3bb92aa168ed070863ac09e3c457a4b2e2220 Signed-off-by: Olaf Lüke <olaf@tinkerforge.com> Reviewed-on: http://openocd.zylin.com/3428 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Liviu Dudau <liviu@dudau.co.uk>
2016-08-13tcl/target/stm32l4x.cfg: Reduce adapter speed before reset.Uwe Bonnes
Change-Id: I200286c0b980369f74e8f1e497bc5e565ddb616d Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3366 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-08-13rtos: removed chSysInit from detection of ChibiOS (#121)Andy Pomfret
Using the presence of the 'chSysInit' symbol for detection of ChibiOS is dangerous because this symbol may not be available if link-time optimisation is used. This patch removes this reliance, so the symbols 'ch' and 'ch_debug' are the only things required for ChibiOS detection. If 'ch' is present but 'ch_debug' is not, an info message suggests that Chibios might be present without its registry being enabled. This message has been reworded a little to make it slightly more equivocal because the chances of a false positive message are increased. Addresses bug #121, "ChibiOS rtos detection fails with LTO enabled". Change-Id: I5ef224735c06446751adee010ce75be4f30f0403 Signed-off-by: Andy Pomfret <cooperised@gmail.com> Reviewed-on: http://openocd.zylin.com/3381 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-08-13kinetis_ke: Switch to standard build variablesAndreas Färber
Instead of using ARM_ prefixed variables and an "arm" target, use CROSS_COMPILE, AS, OBJCOPY. This requires to switch from ?= to = to avoid the host assembler getting invoked. This allows to handle kinetis_ke subdirectory like fm4 and xmc1xxx. Change-Id: I7ea0bf119f6c4716f4d6002794004730af49eef4 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3505 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-08-13contrib/loaders: Add umbrella MakefileAndreas Färber
Add a Makefile that orchestrates the other loader Makefiles. It assumes that the clean target can be run without cross toolchain. at91sam7x does not successfully build and is not really needed either, therefore left out. Add an exception to .gitignore for any contrib/loaders Makefile. Change-Id: I74456b768472f3190a1721bcf41a777bb8daf973 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3504 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-13psoc4.cfg: fixed typo in message, add a hintTomas Vanek
PSoC4 design prevents reset halt/init with standard/low level SWD adapter if hw reset line configured. Give user hint to use 'reset_config none' in such case. Change-Id: I0ca2c46b8575829b0013fd151f2eb63963d66653 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3617 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-10Cortex-M7 handling.Andreas Bolsch
- FPU detection and FPU register support added for Cortex-M7. There is no apparent difference between FPv4 and FPv5_SP but ... - Autoincrement range for MEM-AP added for Cortex-M7 This patch together with #3526 replaces #3123 except for stm32f7x.cfg. Change-Id: I5ed5392e3835674160563ff37d67622a7bf2c877 Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-on: http://openocd.zylin.com/3531 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-10xilinx-xc7: correct Artix7 15T IDCODEFelix Held
The IDCODE of Artix7 15T in the UG470 is wrong; Artix7 35T and 15T don't have the same IDCODE. I've tested this on real hardware. Change-Id: Iac267dc449c23454dd119126749dbeb8267c18ac Signed-off-by: Felix Held <felix-openocd@felixheld.de> Reviewed-on: http://openocd.zylin.com/3633 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-08-09adi_v5_jtag: clear sticky overrun condition in WAIT timeoutMatthias Welwarsky
If WAIT recovery fails (times out), an ABORT command is issued to the DAP but under some conditions the SSTICKYORUN bit in CTRL/STAT is not cleared as well, which renders the DP unusable. This happens when trying to access e.g. the ROM table of powered-down cores, on many targets. Change-Id: Id0a7ba6180069eee562871314f520f938df9718f Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3476 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-09target: add "phys" argument to mem2array, array2memMatthias Welwarsky
Allow using physical addresses with mem2array and array2mem. In order to minimize the impact on existing scripts, "phys" is added as an optional 5th parameter to both commands. This patch also adds "phys" variants to the memwrite/memread commands in memory.tcl. Change-Id: Ia6307f9d861789e7f3ccf1f98961d666bf8d85d6 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3387 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-09Fix resume when core state has been modifiedMatthias Welwarsky
Sometimes it is necessary to resume into a different state (ARM/Thumb) than at debug state entry. According to the documentation this should be possible with "arm core_state arm|thumb" before the resume command, however the original code also restores the original CPSR, which overrides whatever state the core was set to. This seems to work on some cores (e.g. Cortex-A5) but not on others (e.g. Cortex-A9). Using the "BX" instruction to set resume PC and core state works on Cortex-A9 and ARM11, but is not sufficient on Cortex-A5, where an explicit write to the PC (MOV pc, r0) is required additionally. Change-Id: Ic03153b4b250fbb8cf6c75f8e329fb34829aa35f Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3386 Tested-by: jenkins Reviewed-by: Alexander Stein <alexanders83@web.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-02flash: nor: mdr: fix verification problem with 1986VE1T or 1986VE3TAndrey Skvortsov
1986VE1T and 1986VE3T have issue with flash acceleration engine described in their errata (issue 0007). After programming flash acceleration engine's buffer contains old data, and therefore first read data are wrong. Because of this verification after programming fails always. Recommended workaround for the issue is to flush flash accelerator's buffer. To do so it's necessary to read at least 64 bytes of flash through accelerator. Reading bytes through JTAG using default_flash_read doesn't help. It seems that reading should be done by uC itself. Change-Id: I18ef464a68ad5c5b16d3933f31ca61f8e2e7cca3 Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/3509 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-07-19Fix usage of timeval_ms()Andreas Färber
First, fix the timeval_ms() implementation to not have K&R but ANSI argument semantics by adding a missing void. timeval_ms() returns an int64_t, not uint64_t or long long. Consistently use int64_t for variables and PRI*64 as format string. While at it, change a few related variables to bool for clarity. Note that timeval_ms() may return a negative error code, but not a single caller checks for that. Change-Id: I27cf83e75b3e9a8913f6c43e98a281bea77aac13 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3499 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-07-17arm_adi_v5: add dap apreg command for AP register read/writeTomas Vanek
A developer tool: Direct access to AP registers can be useful for handling vendor specific AP like Freescale Kinetis MDM or Atmel SMAP. Change-Id: Ie2c7160fc6b2e398513eb23e1e52cbb52b88d9bd Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2777 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-07-17tcl: add mrb command to mem_helper.tclMatthias Welwarsky
add "mrb" command to read a byte of memory into a variable Change-Id: I5ddc9fbcc55958a249548627bd15824df6dc0d61 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3542 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-07-17server: support binding to arbitrary interfacesSteven Stallion
Some installations of OpenOCD are used in restricted environments that do not permit binding to public interfaces. This patch does not affect the default behavior to listen on all interfaces, however it does give the option to restrict services by way of the bindto command. Change-Id: Id51bd64b376a8c62dd47b08b4d834872925e6af2 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3534 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-09-23 23:24:14 +0000