aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-01at91sam3: Added support for at91sam3sd8a and bUlf Wetzker
This update is untested due to missing hardware. Change-Id: Ibe286b741ebbb1c8ae0bd3dea4b8f3e12320ab34 Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1423 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01flash/nor/at91sam3: fixed lock region sizeUlf Wetzker
According to the "AT91SAM ARM-based Flash MCU SAM3S Series datasheet" (http://www.atmel.com/Images/doc11090s.pdf) p. 30 the lock region size for the at91sam3sd9 family is 32 kbyte. This fix is only based on the datasheet due to missing hardware. Change-Id: Ic47b0642e4f11a60de477eaa0167038103b8ff15 Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1422 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01Support for SST 39VF3201C NOR flashIS2T
* Add Thumb-2 code to write flash memories that don't support DQ5 polling * Make sure default values for unlock commands are set even if there is no PRI information given by the flash * Add a fixup to disable DQ5 polling for the SST 39VF3201C Change-Id: Ib08cf20547d0f500d5f78241521e6b49050c3d40 Signed-off-by: IS2T development team <dev.is2t@gmail.com> Reviewed-on: http://openocd.zylin.com/1449 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01armv4_5: prevent segfault when gdb connects to an underinitialised targetPaul Fertser
This prevents segmentation fault that can occur on cortex_a targets if gdb connection is established before it's halted and CPSR examined. Change-Id: Id996200e0fd95440496509c1fecaabbdbf425e23 Tested-by: Henrik Nordstrom <hno@squid-cache.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1446 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01keep gdb aware of threads if RTOS is set but no threads are createdZied Guermazi
if gdb server (openocd) answers qfThreadInfo with an empty string during boot, gdb will not request thread info anymore. to keep thread awareness in gdb, we have to answer with a non empty string, 'l' indicates an end of list, and is a valid answer here. Change-Id: I7870a5db1090c786f306db16a25871e69b8a9760 Signed-off-by: Zied Guermazi <guermazi.zied@gmail.com> Reviewed-on: http://openocd.zylin.com/1432 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01cortex_m: deprecate soft_reset_haltSpencer Oliver
soft_reset_halt was only really intended for the older arm arch, eg. armv4/5. Newer arch such as armv7m/mips do not need this as they have better alternatives. Change-Id: Ifb360680b7e4bfa5365f3c79d82574bded952b45 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1442 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-01Allow autoscan up to 64 bit IR lengthsAndreas Fritiofson
Change-Id: Ib15ff67b57606fe6c7997f3f9bd90e096acd5f3d Signed-off-by: Evan Hunter <ehunter@broadcom.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/832 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01Add support for 64 bit parameter to irscanEvan Hunter
Change-Id: I89e0422456c59ee86c4b6d9bd3b3ad32051b31ac Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/831 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-29drivers/jtag: usb_blaster add pin controlsRobert Jarzmik
Add pin controls (pin6 and pin8). These pins can be controled either : - with a fixed value (0 or 1) - by TRST or SRST reset signal (driven low when signal activated). Change-Id: Ie6a3e57fc6ba6a38fdb9a009c976e3febab8f578 Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on: http://openocd.zylin.com/1448 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2013-06-21flash/nor/spi: uniform all hex data to lowercaseAntonio Borneo
Change-Id: I3daee7218283e521bf490993dba02a8658540951 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/1453 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-21flash/nor/spi: add flash Micron n25q064Antonio Borneo
Change-Id: Ic39bb6d020767cece2eaa4e194071be8b002ece4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/1452 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-21Bus Pirate driver: Small assorted fixes.R. Diez
Fixes are: - Discard any stale data from the previous connection. - Disable CR/LF translation on the (virtual USB) serial port. - Increase the average USB packet size. The 1 KiB buffer was underutilised. - Option "buspirate_speed fast" now works out of the box. - Some extra comments, error checking, etc. Change-Id: I72c49d943a8ce9c5e5d1644ef90cb1482f93c618 Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/1437 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-21stm32f2x: Correct calculation of number of 128k sectors.Andreas Fritiofson
Fixes regression introduced in 9785f51f that caused write outside allocated memory during probe of devices with <1024K flash. Reported-by: Alexander Pakhomov <ker0sin@yandex.ru> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Change-Id: Ifba8833e436064624efbf678162538fd351a5702 Reviewed-on: http://openocd.zylin.com/1450 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-14build: add missing configure quotesSpencer Oliver
Change-Id: I14abb24292d4c2ff088c7b95773f73ceac3287cd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1445 Tested-by: jenkins
2013-06-14build: fix incorrect configure quotesSpencer Oliver
Change-Id: I427035df1ab2bfb2ec6ac8fafc9683f7d3e3bf06 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1444 Tested-by: jenkins
2013-06-14hla: Add Simulated DCC register for target communicatonBrent Roman
Change-Id: I193be169059caba661e46de8081d7e92f92cafee Signed-off-by: Brent Roman <brent@mbari.org> Reviewed-on: http://openocd.zylin.com/1364 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12[RFC] mips: Enable bulk write optimization for all writesAndreas Fritiofson
mips_m4k_bulk_write_memory was only called from target_write_buffer as an optimization when the word count was large enough. Remove mips_m4k_bulk_write_memory from the target type, causing the default implementation to call the regular mips_m4k_write_memory instead. Perform the dispatch to bulk write in mips_m4k_write_memory, enabling the optimization for target_write_memory() writes with size 4, in addition to target_write_buffer() writes. It also enables making the choice of bulk write vs regular write specifically for the architecture and not relying on the generic target code to make a sensible decision. Change-Id: I295f21a67ceaa195802403f2518ea2e0a025c1c7 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1215 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2013-06-12cfg: add stm32 flash driver aliasSpencer Oliver
This will enable the user to use either name when calling flash driver cmds. For example the stm32f3x family use the same flash driver as the stm32f1x, so the user has to use 'stm32f1x mass_erase 0' which can be confusing. Now the user can also use 'stm32f3x mass_erase 0' with the same result. Change-Id: I14280674c8dfa2ce1c01e327af7f38e36150462c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1428 Tested-by: jenkins
2013-06-12stm32w: add STM32w108xx generic configurationGiuseppe Barba
Add generic TCL configuration for STM STM108Wxx chips. Change-Id: I981cdccb78833f442c3be4188c8c023064067e4e Signed-off-by: Giuseppe Barba <giuseppe.barba@gmail.com> Reviewed-on: http://openocd.zylin.com/1439 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12stm32: add new stm32f0 device idSpencer Oliver
updated from RM0091 rev4. Change-Id: Ic5e46229b85ce3974ef3016724d29a94037ac577 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1435 Tested-by: jenkins
2013-06-12cortex_a: remove memory leak on failureSpencer Oliver
If mem_ap_sel_write_atomic_u32 fails then tmp_buff may not be released. Detected by clang. Change-Id: I3d5416bd47d0eea61f61ec02ac5e43c82f114108 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1433 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-12str9: ignore boundary scan versionSpencer Oliver
Ignore version of Boundary Scan TAP in newer revisions of the str9. Change-Id: I6e205f8c731f07078c469e686025857c180f3a6d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1436 Tested-by: jenkins
2013-06-12Change variable scope.Jim Norris
Change scope of the variable gdb_reg_list_idx from global to module. Change-Id: Ib8273c0769c11c1d5a338e4711efbddb8e8a0243 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/1441 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2013-06-12configure: remove --enable-libusb0 option, rework libusb selectionPaul Fertser
This makes libusb handling more consistent: if any driver requires libusb, first check for libusb-1 availability, if not found and libusb0 is ok for this case, try libusb0. A user-visible bug fixed by this is that when a user was selecting a driver that required libusb-1 but was lacking the necessary dev files or libraries, configure didn't complain (but the build was failing of course). --enable-stlink doesn't really require libusb-1 but since it's using the same automake symbol HLAADAPTER, ti_icdi is getting built too which needs libusb1 unconditionally. Since using libusb-0.1 makes little sense anyway, leave that as is. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Change-Id: I630a4ad9e4583743d45b2233bf5d8f4e5c0aab82 Reviewed-on: http://openocd.zylin.com/1434 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12libusb1_common, ftdi: clarify libusb_open error messagePaul Fertser
Print a user-friendly message when libusb_open() fails, e.g. Error: libusb_open() failed with LIBUSB_ERROR_ACCESS when there's a permissions problem. Also output a configure warning if libusb older than 1.0.9 is detected. Change-Id: I800f71f06672fe06c0a98a4e469f853b5021bcfe Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1430 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12ftdi: config for TUMPAPaul Fertser
Add a config file for TIAO USB Multi-Protocol Adapter. Based on schematics from http://www.mediafire.com/?zv158nnx1gv0cy2 Cc: Volkan K <volkan-k@users.sourceforge.net> Change-Id: I0dfd93b0b1e558e4ccd7c94c005c099947ec94df Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1438 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-10build: fix incorrect GPL address from last commitSpencer Oliver
962b3eb40cc5b69d9b3d6fcc4c5d56c4d204a307 included the old GPL address. Change-Id: I7affbdc3fc1c9251ea90796ab9eeef4d56ba4308 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-06-10Add BCM2835 (as found in Raspberry Pi) interface driverPaul Fertser
This adds support for JTAG programming by bitbanging GPIOs exposed on the RaspberryPi's expansion header. Tested by connecting directly to an STM32VLDiscovery board, without any additional circuity. I observed maximum about 4MHz on the TCK pin with an old analogue 'scope and about 100kHz when setting the speed to 100kHz. Busyloop waiting is needed because even with a single 0ns nanosleep call (with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low to be useful. The speed testing with adapter_khz 2000 gave the following results: sudo chrt -f 1 nice -n -19 ./src/openocd \ -f interface/raspberrypi-native.cfg \ -c "set WORKAREASIZE 0x2000" \ -f target/stm32f1x.cfg -c "adapter_khz 2000" wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s) dumped 131072 bytes in 1.445699s (88.538 KiB/s) This is 3.7 times faster for writing and 14.3 times faster for reading compared to the generic sysfsgpio driver; probably the writing speed is limited by the target itself here and reading speed might be considerably higher too with appropriate connection and a capable target. BCM2835 name is choosen over BCM2708 because the published peripherals datasheet uses the particular model name and not family name. Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/758 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05update files to correct FSF addressSpencer Oliver
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-06-05Added OpenJTAG DriverRyan Corbin
Updated OpenJTAG driver from www.openjtag.org to work with latest version of OpenOCD. Change-Id: I2917f4e5835fb9ca5265e81dc38515fa97ae9503 Signed-off-by: Ryan Corbin <corbin.ryan@gmail.com> Reviewed-on: http://openocd.zylin.com/1406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05nds32: add new target type nds32_v2, nds32_v3, nds32_v3mHsiangkai Wang
Add target code for Andes targets. Change-Id: Ibf0e1b61b06127ca7d9ed502d98d7e2aeebbbe82 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1259 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05aice: add Andes AICE supportHsiangkai Wang
Andes AICE uses USB to transfer packets between OpenOCD and AICE. It uses high-level USB commands to control targets instead of using JTAG signals. I define an interface as aice_port_api_s. It contains all basic operations needed by target-dependent code. Change-Id: I117bc4f938fab2732e44c509ea68b30172d6fdb9 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1256 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-04drivers/jtag: rewrite usb_blaster driverRobert Jarzmik
Rewrite the Altera USB Blaster dongle driver : - make extensive use of byte-shift mode, to improve JTAG speed. This is the main reason of the rewrite. It improves the memory dumps with a factor 3 at least, and upload 100 times, from 1 kBytes/sec to 100 kBytes/sec with a USB-Blaster connected to an Altera Virtual JTAG TAP + OpenRISC CPU. - split the low level API part (between FTDI and FTD2xx) from core driver, so that in the future, if both libftdi and ftd2xx can coexist, the driver will be able to switch dynamically from one access to the other. Change-Id: I2ee9cedf4a5eb27501f337993ee0cdee52517e7c Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Marek Czerski <ma.czerski@gmail.com> Tested-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/467 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Alexandre Becoulet <alexandre.becoulet@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-03cortex_m: print 'Cortex-M' rather than 'Cortex-M3'Spencer Oliver
This file is used by all the Cortex-M family not just Cortex-M3. Change-Id: Ie8680535b220c66bb8fcd862510407a46a73e8a0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1429 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-03cortex_a: fix FTBS on ARM due to alignment issuesAndreas Fritiofson
Native compilation on RaspberryPi with gcc (Debian 4.6.3-1) 4.6.3 Target: arm-linux-gnueabi ends with error: cortex_a.c: In function 'cortex_a8_read_apb_ab_memory': cortex_a.c:2063:40: error: cast increases required alignment of target type [-Werror=cast-align] cc1: all warnings being treated as errors Also check for malloc failure. This patch is compile-tested only. Change-Id: I580c505424d03ac3a565de54182db22277c52ac1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1369 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-03rlink: fix speed table generationPaul Fertser
The speed table generation (by using explicit make -f Makefile.rlink) was broken since 865efd828a267992db0f2a92a731c5ce23a34236 Dec 2 2009 which did a bunch of renaming and included hand-editing of a generated rlink_speed_table.c file. This patch is compile-tested, i.e. the new generated rlink_speed_table.c links fine with the rlink driver. Change-Id: I1789a2f2f5bf20183b772d55c55fe68a0bd05cf5 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1431 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-30user guide: Update the ZY1000 description.William M.A. Traynor
As per request from Peter at Ultimate Solutions, updated the description of the ZY100 Stand-alone JTAG probe. Signed-off-by: Bill Traynor <wmat@alphatroop.com> Change-Id: Ia5c0b9a7261becd524a02aba1b22a98a2e09a4c9 Signed-off-by: William M.A. Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/1357 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-29tools: add sample remote_bitbang sysfsgpio serverPaul Fertser
This adds a sample server that implements remote_bitbang protocol, based on sysfsgpio interface driver. Change-Id: I17633e91f819ab7b806606e1a1c38d5366ab4598 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1403 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-29cortex_m, hla_target: do not try asserting SRST if it's not presentPaul Fertser
This should cover all the cases when RESET_SRST_NO_GATING is set without RESET_HAS_SRST. This might happen when RESET_SRST_NO_GATING is automatically set by a target code (and not from tcl). However, there're some other places (mips_m4k, arm7_9_common) where adding RESET_SRST_PULLS_TRST would lead to trying to use SRST even if it's not present. Currently it's impossible for the user to enable that flag without enabling SRST. Change-Id: Ib1c6f68feed0b8057d55afd5f260bb22ab332ced Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1405 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-29interface/ftdi: remove "untested" warning from DP BusblasterPaul Fertser
This is reported as working by mitsakos on IRC. Change-Id: I26b97779c3e8e237c5b3996aa81183031b12ec0c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1419 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-28targets: fix target_type name for Cortex-A targetsPaul Fertser
Commit d9ba56c295f057e716519a798bf9cdb4898c24f4 did a bunch of renaming of cortex_a8 to cortex_a, including the names in config files. However that introduced a regression as the name in target_type struct remained unchanged. This adds the last missing bit: actual renaming of the target name as understood by OpenOCD. Also change the (hopefully) last instance of using it in the supplied config files, namely from imx6.cfg. Change-Id: Ib9289fc6d946630133ec6e36c20015ccb50acf61 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1420 Tested-by: jenkins Reviewed-by: Chris Johns <chrisj@rtems.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10remote_bitbang: De-duplicate init code and clean up on errorAndreas Fritiofson
Change-Id: I8be413a9e1683f96f835232f9ff25d9bd42099de Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1380 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10remote_bitbang: Convert to use getaddrinfo()Andreas Fritiofson
Since gethostbyname() is deprecated and inconvenient, rewrite to use getaddrinfo() using an implementation more or less copied from its man page. This automatically enables support for IPv6. This also fixes a FTBFS on ARM due to alignment issues. Change-Id: I990a49506cac4b26faf77587937e506138371f7c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1379 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10Added functionality to the SYS_SYSTEM semihosting call.Brandon Warhurst
There seems to be a few missing semihosting calls. I am not sure why this one is actually missing, since it seems simple enough to implement. It was tested using an HTC HD7 connected to openocd through a "home brew" ftdi 4232H board. Change-Id: Ie17dc96c6d48227a3dc9ff1e21201a85498a10b1 Signed-off-by: Brandon Warhurst <roboknight@gmail.com> Reviewed-on: http://openocd.zylin.com/1345 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10Added: RTOS awareness for embKernelRavaz
Change-Id: I98b60f50a5fc486bda83b83ad7ec73826ee11607 Signed-off-by: Ravaz <embkernel@gmail.com> Reviewed-on: http://openocd.zylin.com/1334 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10stm32 configs: use 4kB working area size by defaultPaul Fertser
This is needed for configs that might be used with the cheapest STM32F100 parts that have only 4kB SRAM. Restrictions for the other STM32 families are verified to be set appropriately. Change-Id: I1ad2370435015604db9f27c1a76c153480311a28 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1378 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-08telnet_server: support C-p, C-n for moving through historyPaul Fertser
This modifies telnet server to allow using common readline combinations to move up/down history, without the need to touch cursor keys. Change-Id: Ib659075883e91794b44f391f7c29bbdfdd679d10 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1376 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-08efm32: fix FTBFS on ARM due to alignment issuesPaul Fertser
The following warnings prevent OpenOCD from building: efm32.c: In function 'efm32x_read_lock_data': efm32.c:373:8: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c:386:9: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c:394:9: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c:402:9: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c: In function 'efm32x_get_page_lock': efm32.c:430:17: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c: In function 'efm32x_set_page_lock': efm32.c:441:19: error: cast increases required alignment of target type [-Werror=cast-align] cc1: all warnings being treated as errors This patch is compile-tested only. Change-Id: Ia3a8f342e0f5e30c8ea4de9435c5c7a80bc100e3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1370 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-05-08sysfsgpio: do not try to initialise absent signalsPaul Fertser
When e.g. SRST is not specified, the current code results in assigning 0 to srst_fd and subsequently a stray '1' is output on screen on reset. Avoid this by not doing bogus initialisation. Change-Id: Iadb847a384a927ae746124cf6e4e3c6cc8b11406 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1375 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-06jtag/adapter: add connect_[de]assert_srst to reset_config usagePaul Fertser
Add the connect under reset options to the online help for reset_config. Change-Id: I4b9a87b234de01531390b39b898a848841d1e834 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1377 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 11:36:34 +0000