aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-02tcl/target: Switch Renesas R-Car Gen2 boards to new configMarek Vasut
Switch Renesas R-Car Gen2 boards which are currently supported from the old ad-hoc SoC configuration to the new unified configuration. Change-Id: I8a67bceb3ae92d840ae4dbac20868c75e83f7d58 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5398 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02tcl/target: Add unified config for Renesas R-Car Gen2 targetsMarek Vasut
Add configuration for the Renesas R-Car Generation 2 targets. These are SoCs with Cortex A15s and A7s. All cores currently supported by OpenOCD are supported here as well as two new cores, M2N and V2H, for the sake of support completeness. Change-Id: Ib6fe70a91360b4f8bd69822ee28b6dea530cfa0a Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5397 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02tcl/target: Abort on invalid SoC selection on R-Car Gen3Marek Vasut
Instead of printing error message and continue, abort on invalid SoC selection right away. Change-Id: I9c7a7111b590c6c49a0826562380b881a162a8dc Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5439 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02flash/stm32h7x: add support of STM32H7Ax/H7Bx devicesTarek BOCHKATI
this new device has the following features: - single core cortex-M7 - 2MB flash - dual bank - page size 8k - write protection grouped by 4 sectors - write block size 128 bits (16 bytes) the bit definition of FLASH_CR is different than STM32H74x, that's why we introduced a helper to compute the FLASH_CR value Change-Id: I4da10cde8dd215b1b0f2645f0efdba9d198038d1 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5441 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-03-02Add support for SAMD21E17D deviceMichael Stoll
Change-Id: Id0a533f8899b20cc87e3a9143383ddf279c86301 Signed-off-by: Michael Stoll <michael.stoll@meadow-robotics.com> Reviewed-on: http://openocd.zylin.com/5458 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-29target/arc: fix clang static analyzer warningsEvgeniy Didin
Fixes: * Removed typo in *bitfields initializations. * Removed potentional memory leak allocating reg_data_type_struct_field/reg_data_type_flags_field objects. * Initialize buffers with "0" before usage in buf_set_u32(). * Removed memory leak in jim_arc_add_reg(). Change-Id: Iefde57cd4a48c4f3350c376475df8642607f52ff Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5480 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-27Introduce ARCv2 architecture related codeEvgeniy Didin
This patch is an initial bump of ARC-specific code which implements the ARCv2 target(EMSK board) initializing routine and some basic remote connection/load/continue functionality. Changes: 03.12.2019: -Add return value checks. -Using static code analizer next fixes were made: Mem leak in functions: arc_jtag_read_memory,arc_jtag_read_memory, arc_jtag_write_registers, arc_jtag_read_registers, jim_arc_add_reg_type_flags, jim_arc_add_reg_type_struct, arc_build_reg_cache, arc_mem_read. Dead code in "arc_mem_read"; In arc_save_context, arc_restore_context correct arguments in"memset" calls. In "build_bcr_reg_cache", "arc_build_reg_cache" check if list is not empty. 29.12.2019 -Moved code from arc_v2.c to arc.c -Added checks of the result of calloc/malloc calls -Reworked arc_cmd.c: replaced spagetty code with functions -Moved to one style in if statements - to "if(!bla)" -Changed Licence headers 22.01.2020 -Removed unused variables in arc_common -Renamed register operation functions -Introduced arc_deinit_target function -Fixed interrupt handling in halt/resume: * add irq_state field in arc_common * fix irq enable/disable calls ( now STATUS32 register is used) -Switched from buf_set(get)_us32() usage to target_buffer_set(get)_u32() -Made some cleanup 30.01.2020 -Removed redundant arc_register struct, moved target link to arc_reg_desc -Introduced link to BCR reg cache in arc_common for freeing memory. -Now arc_deinit_target frees all arc-related allocated memory. Valgrind shows no memory leaks. -Inroduced arch description in arc.c 01.02.2020 -Remove small memory allocations in arc_init_reg. Instead created reg_value and feature fields in arc_reg_desc. -Add return value for arc_init_reg() func. -Replaced some integer constants(61,62,63) with defines. -Removed redundant conversions in arc_reg_get_field(). -Moved iccm/dccm configuration code from arc_configure() to separate functions. 19.02.2020 -Change sizeof(struct) to sizeof(*ptr) in allocations -Changed if/while(ptr != NULL) to if/while(ptr) -Removed unused variables from struct arc_jtag -Add additional structs to arc_reg_data_type to reduce amount of memory allocations calls and simplifying memory freeing. -Add helper arc_reg_bitfield_t struct which includes reg_data_type_bitfield object and char[] name. Reduces memory allocations calls. -Add limit for reg_type/reg_type_field names(20 symbols). -Add in jim_arc_add_reg_type*() functions additional argnument checks(amount of field/name size). -In jim_arc_add_reg_type*() reduced amount of memory allocations. -Cleanup of jim_arc_add_reg_type*() functions. -For commands update ".usage" fields according docopt. -Cleanup in arc_jtag.c -Renamed functions which require jtag_exeutre_queue() to arc_jtag_enque_*() -Add arc_jtag_enque_register_rw() function, which r/w to jtag ir/dr regs during regiter r/w. 24.02: -Change include guards in arc* files according coding style -Remove _t suffix in struct arc_reg_bitfield_t -Some cleanup Change-Id: I6ab0e82b12e6ddb683c9d13dfb7dd6f49a30cb9f Signed-off-by: Evgeniy Didin <didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5332 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-24coding style: doc: remove empty lines at end of text filesAntonio Borneo
Empty lines at end of text files are useless. Remove them. Change-Id: I30e4d3d03c4ce846aa7bcefa7366f88732275557 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5170 Tested-by: jenkins
2020-02-24coding style: testing: remove empty lines at end of text filesAntonio Borneo
Empty lines at end of text files are useless. Remove them. Change-Id: Id05a7bd944edccaa03ed9eb48599b2e262664cf0 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5169 Tested-by: jenkins
2020-02-24coding style: tools: remove empty lines at end of text filesAntonio Borneo
Empty lines at end of text files are useless. Remove them. Change-Id: Iea4c8425e137d6252fb2e5b62e0b124c73a01cb6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5168 Tested-by: jenkins
2020-02-24coding style: add newline at end of text filesAntonio Borneo
Some text file is missing newline at EOF. Add it. Change-Id: Ieebc790096f40961283c644642e56fde975e957f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5167 Tested-by: jenkins
2020-02-24coding style: fix space around pointer's asteriskAntonio Borneo
The script checkpatch available in new Linux kernel offers an experimental feature for automatically fix the code in place. While still experimental, the feature works quite well for simple fixes, like spacing. This patch has been created automatically with the script under review for inclusion in OpenOCD, using the command find src/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types POINTER_LOCATION --fix-inplace -f {} \; then manually reviewed. OpenOCD coding style does not mention the space around pointer's asterisk, so no check is enforced. This patch only makes the style uniform across the files. The patch only changes amount and position of whitespace, thus the following commands show empty diff git diff -w git log -w -p git log -w --stat Change-Id: Iefb4998e69bebdfe0d1ae65cadfc8d2c4f166d13 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5197 Tested-by: jenkins
2020-02-24log: let command "log_output" to set back its defaultAntonio Borneo
The default log output is stderr. After the command "log_output" has been used to set an output log file, it is possible to return back to stderr only on *NIX hosts specifying a new log output file as "/dev/stderr", but this is not intuitive, not documented and not portable out of *NIX. Make command "log_output" able to set back the default output to stderr when the parameter is either "default" or is missing. While there, add debug message to log the change and make the command return error on incorrect syntax. Change-Id: I8c7c929780f58e2c23936737c8e7274a96734786 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5233 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-24adi_v5_dapdirect: fix connect under resetAntonio Borneo
Deassert the reset only if connect under reset is not required; otherwise, assert the reset. This fix aligns the behavior of connect under reset in dapdirect with the behavior in jtag and swd. Change-Id: I937ef4320b44e51ef6cb0e349e12348dbfbe4abb Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5415 Tested-by: jenkins
2020-02-24flash/nor/stm32l4x: Minor code cleanupsMarc Schink
Change-Id: I3053bbe888ac1f0a0593ef51bf9ca564f1cc27ec Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5449 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-24flash/nor/stm32h7x: Minor code cleanupsMarc Schink
Change-Id: Ia212b1877abeda27f507de29a3aee2b171c1b8c6 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5448 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Christopher Head <chead@zaber.com>
2020-02-24Support bitbanging on 64-bit ARM CPUs.Mara Bos
The configure.ac file restricted this to only 'arm' CPUs, but ${host_cpu} is 'aarch64' (not 'arm') for 64 bit ARM CPUs. Tested on a Raspberry Pi compute module 3. Change-Id: I6cb1d7e7fadc51dbb12419176f1faf0a0cb0b228 Signed-off-by: Mara Bos <m-ou.se@m-ou.se> Reviewed-on: http://openocd.zylin.com/5274 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-23tcl/board: update ST NUCLEO-H745ZI-Q configuration file to use dapdirectTarek BOCHKATI
this board embeds and STLINK DAP capable firmware Change-Id: I276e9f44ad6cf7d1ff664898bbc884676bdbc967 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5316 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-23target/adi_v5_swd: fix clang static analyzer warningTomas Vanek
Change-Id: I24b3e74b62fad469e3150ad97a10a9ab69c2793b Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/5374 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-23flash/nor/tcl.c: add filld command to write double-word with 64-bit valueTarek BOCHKATI
Change-Id: I2eeda7af7d855ed1284083d025994f8fa9531969 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5443 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23flash/nor/stm32l4x: lock flash after errorTomas Vanek
Also add locking after option write, it was missing at all. Change-Id: I0227c6a74866f0fe8e40aa58616f0b3115ad5af0 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/5361 Tested-by: jenkins Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2020-02-23tcl/board: Add imx8mp-evkLeonard Crestez
Board includes an internal adapter (interface/ftdi/imx8mp-evk.cfg) and a standard external ARM-10 connector. Change-Id: Ibb301011665b1edfb95be1213d8100143f6839dd Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5427 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23tcl/interface/ftdi: Add imx8mp-evk internal JTAG interfaceLeonard Crestez
The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23flash/stm32h7x: use alignment infrastructureChristopher Head
Report the 32-byte alignemnt requirement via the bank structure rather than enforcing it ad-hoc in the write routine. This allows people to do non-32-byte-aligned writes if they want, with the infrastructure fixing up the addresses passed to the low-level driver. Change-Id: I2c4f532f2000435954a900224dbc9f2c30d1cc94 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5388 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23flash/nor/stm32f1x: Some small code cleanupsMarc Schink
Change-Id: I1fc08b96b179a1376af233b713ae50d6ad7867a0 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5404 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2020-02-23flash/nor/stm32h7x: check OPTCHANGEERRChristopher Head
Without this, a failed attempt to change option bytes will silently appear to succeed but without actually changing the option bytes (confusingly, the option bytes will still read back as if they had been changed until a reboot as well!). Change-Id: Id529c6c384a8a16be75f5702310670d99d8fac79 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5418 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2020-02-23flash/nor/stm32h7x: fix incorrect array indexingChristopher Head
Change-Id: Iec2246df284953d1442dfefdad8e70041690dfe2 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5417 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2020-02-15stlink: add trace support in DAP direct modeAntonio Borneo
Reuse the existing tracing functionality of HLA mode to support tracing in DAP direct mode. Change-Id: I75a01e88ba5d3e45717e4108b99697ac3225db9e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5409 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-15armv8: check the core state to pass the correct arch to gdbAntonio Borneo
Commit 3799eded6761 ("target/aarch64: add support for multi-architecture gdb") passes the constant string "aarch64" as architecture to gdb. This is not working if the core is running in 32 bits mode; gdb reports: Truncated register 8 in remote 'g' packet then closes the connection with OpenOCD. Make the architecture string dependant from the current state of the core. Change-Id: I16e1614ea02ba29bf87f450b3dfe25c83c9a3612 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5234 Tested-by: jenkins Reviewed-by: Muhammad Omair Javaid <omair.javaid@linaro.org>
2020-02-15coding style: use ARRAY_SIZE() when possibleAntonio Borneo
We have the macro ARRAY_SIZE() already available. Use it! Issue identified by checkpatch script from Linux kernel v5.1 using the command find src/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types ARRAY_SIZE -f {} \; Change-Id: Ic7da9b710edf118eacb08f9e222f34208c580842 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5198 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-15coding style: remove unnecessary parenthesesAntonio Borneo
Identified by checkpatch script from Linux kernel v5.1 using the command find src/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types UNNECESSARY_PARENTHESES -f {} \; then fixed manually. Change-Id: Ia2d9a0953d9b89fc87dc1195aa05c7f63c068c48 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5196 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-15jtag/startup.tcl: remove trailing whitespacesAntonio Borneo
Change-Id: I1d6f4f47ee6f8985c84ddb2647e029c5f4e6a55a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5194 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de>
2020-02-15target/nds32: fix type of magic numberAntonio Borneo
The macro NDS32_COMMON_MAGIC was cast-ed to int to avoid compile time error for comparison type mismatch while comparing it with the field common_magic. This is incorrect because the macro value is a 32 bit unsigned value; better changing the type of the field common_magic to keep the unsigned value. Issue identified by checkpatch script from Linux kernel v5.1 using the command find src/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types TYPECAST_INT_CONSTANT -f {} \; Change-Id: Ib5924b6cecdffe70ab5c78d3b30a9c8e4deb7c7b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5193 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-15flash/nor/stm32lx: Minor code cleanupsMarc Schink
Change-Id: I6440a4eb1f65a2f8ae2914b38f21a59955e85e0d Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5438 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-15jtag_vpi: added an option to stop simulation on exitJan Matyas
Command CMD_STOP_SIMU had been defined in jtag_vpi for a long time (since the beginning?) but has not been utilized until now. Its purpose is to signal to the jtag_vpi server (i.e. the RTL simulation software) that the simulation shall be stopped. This commit adds a TCL configuration command that selects whether CMD_STOP_SIMU will be sent to the jtag_vpi server when OpenOCD is about to exit. This functionality is off by default to maintain identical behavior as in previous OpenOCD versions, unless the user enables it explicitly. Change-Id: If3894af6efa61038ccf6c9191f664e2128f2ef11 Signed-off-by: Jan Matyas <matyas@codasip.com> Reviewed-on: http://openocd.zylin.com/5407 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-15Include start-of-region addressPiotr Kasprzyk
When $ADDRESS == $BASE that address used to be excluded. After this commit $ADDRESS == $BASE is within the range. Now the rule for "iswithin" is: $BASE <= $ADDRESS < ($BASE + $LEN) Thanks to Antonio Borneo <borneo.antonio@gmail.com> for noticing this. Change-Id: I74373c6010e069372d886fa7ecd8120892616834 Signed-off-by: Piotr Kasprzyk <ciri@ciri.pl> Reviewed-on: http://openocd.zylin.com/4799 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-13flash/stm32lx: mention explicitly that this driver covers STM32 L0 and L1Tarek BOCHKATI
this is to avoid confusion with STM32 L4, L4+ and L5 families also: - a warning message is changed to error - stm32l0x and stm32l1x aliases has been created to permit the usage of either names Change-Id: If3f16d2a3b7d1369959aa7407da37a9076ea91d7 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5437 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-13flash/startup.tcl: update stm32 flash driver aliasesTarek BOCHKATI
This will enable us to use either name when calling flash driver commands. For example the stm32wbx family use the same flash driver as the stm32l4x, so the user has to use 'stm32l4x lock 0' which can be confusing. Now the user can also use 'stm32wbx lock 0' with the same result. Change-Id: Ic0d8da9afc202d7cc82d9b9949827e958a1cc824 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5436 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-09jtag: Fix copy-paste error in 'irscan' helpMarek Vasut
Replace "Instruction Register (DR)" with "Instruction Register (IR)", that is sed "s@DR@IR@", which was likely a copy-paste error. Change-Id: I3e625872c855d655485b3efa5f50fe1c00ecbf52 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5446 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2020-02-08tcl: Remove executable bitMarc Schink
Change-Id: Ib452435b13c3cb8d14453d983151936238b9601d Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5419 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-08efm32: add EFR32ZG13P and EFR32ZG14P partsFrank Hunleth
This adds the EFR32 Zen Gecko Family parts. The device family values are found in table 4.7.11 of https://www.silabs.com/documents/public/reference-manuals/efr32xg14-rm.pdf. Change-Id: I3858b7ba815784b1150e2214a2833e8ff7d249e1 Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Reviewed-on: http://openocd.zylin.com/5364 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de>
2020-02-08stlink: fix max packet size for 8 bit R/W on stlink-v3Antonio Borneo
While ST internal documentation for STLINK-V3 reports that 8 bits read/write commands handle 512 bytes of data, a firmware bug makes it crashing on high data size. This is fixed with firmware V3J6 (shipped together with V2J36). Check for firmware version to use the proper data size. Change-Id: Iaba6cd26bbe130097c1c19de610680e0e8b69bfc Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: https://sourceforge.net/p/openocd/tickets/259/ Reviewed-on: http://openocd.zylin.com/5408 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-08jtag: flush jtag queue after jtag_add_tlr()Antonio Borneo
If the TLR sequence is sent as result of the command "adapter assert trst" while polling is off, the TLR sequence is not sent out until a following jtag operation. Flush the jtag queue before return. Change-Id: I20efd7137cb7b1d1c4f73c1362cbe4e57aeaae49 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5405 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-08Switch to HTTPS for submodulesChristopher Head
repo.or.cz already redirects HTTP requests to HTTPS. There is therefore no possible benefit to keeping the submodule URLs using HTTP—anyone who can’t access via HTTPS will fail anyway, immediately after the redirect. Changing the submodule URLs eliminates one unnecessary HTTP request and, more importantly, eliminates SSLStrip-style attacks. Change-Id: I9faf1ec8aa87bcfd1acafe2c445a0baf2abfbd09 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5406 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-06tcl: fix remaining scripts after rework adapter commandsAntonio Borneo
Some script have been added or modified after the patches for reworking the adapter commands were pushed in gerrit. Such scripts use the old command syntax and trigger a "deprecated" warning at runtime. Fix them with the same sed commands used for the other scripts: sed -i 's/^interface /adapter driver /' $(find tcl/ -type f) sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Change-Id: I0824d6c506a9af3eb9129b74c02a92b4eb1b100d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5424 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins
2020-02-06tcl: Add interface config for isodebug isolated JTAG/SWD+UARTAndreas Fritiofson
Currently only used internally at Unjo. Change-Id: I7786e95e1bd755a73156ecad5b6d7f6273d8ddef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5251 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-06jtag: drivers: xlnx-pcie-xvc: fix build on Linux pre v4.10Antonio Borneo
The macro PCI_CFG_SPACE_EXP_SIZE is exposed to userspace from Linux kernel v4.10, with commit cc10385b6fde ("PCI: Move config space size macros to pci_regs.h") http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cc10385b6fde Define the macro in the driver code, if not already defined. Change-Id: I610219a2587eff2c142102b9f7830e3da882af78 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5435 Reviewed-by: Moritz Fischer <moritzf@google.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins
2020-02-06flash/nor: Add Renesas RPC HF driverMarek Vasut
Add driver for the RPC block in HF mode on Renesas R-Car Gen3 SoCs. This driver allows operating the on-SIP HF memory. Note that HF is CFI compliant flash, but it is not memory mapped, hence the need to replace all the memory accessors and read/write functions. The write function is entirely replaced to increase performance and is Spansion/AMD specific, since there is no known SIP with other HF from another vendor. Add the following two lines to board TCL file to bind the driver on R-Car Gen3 SoC using HyperFlash: set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME rpchf 0x08000000 0x4000000 2 2 $_CHIPNAME.a57.0 Change-Id: Ie18729d017eeb46e1363333ffe002d010dfc5ead Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5149 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-06flash/nor: Export various functions from the CFI coreMarek Vasut
Export various functions needed by other driver, specifically the upcoming Renesas RPC HF driver. No functional change. Change-Id: I551258979a7221288fb4f4382f857db5cfe0b0de Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5148 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-29jtag: Fix jtag_reset fallbackLeonard Crestez
The fallback provided for the jtag_reset command always fails with a strange message: 'Error: invalid command name "de"' This is caused by incorrect quoting inside the warning message. Fixes: c07b774e8f49 ("jtag: replace command "jtag_reset" with "adapter [de]assert"") Change-Id: Icd47fca2b5a7b33474bfb0040e88193a0968f301 Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5416 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 22:27:14 +0000