aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-08configure: Use same case for libjaylink as for other libsAndreas Fritiofson
Change-Id: I60d91a0543d9b8c580254cdc5f04b2e60209b98b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3868 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08target: LS1_SAP: fix "declaration of 'read' shadows a global" warningPaul Fertser
Change-Id: I7070193819cc134f9fe1427c20a11160ec415ccb Reported-by: Jens Bauer <jens-lists@gpio.dk> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3877 Tested-by: jenkins
2016-12-08target: Replace malloc+manual zeroing with callocAndreas Fritiofson
Change-Id: I3c782c34b59cb36b8ca1d36e9c804c67bae5cb45 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3667 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Replace shell constructs with M4sh macrosAndreas Fritiofson
AS_IF and AS_CASE should be used instead of if and case to properly handle macros in conditional branches. Also guard all tests against empty variables and embedded spaces which makes it possible to remove some variable defaults. Change-Id: Ib675177690d406a80ee98dd5d105296a7cdc7b8a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3669 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08jlink: Output libjaylink versionMarc Schink
Output the package version of libjaylink to ease debugging. Change-Id: I3b9da6d046d140ba850056c98e67bed22c885ee0 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3887 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08libjaylink: Update to latest master branchMarc Schink
The changes since the last update are mainly related to the build system, preparations and cleanups for the upcoming release. If there are no bugs reported, this will be the last update before the libjaylink 0.1.0 release. Change-Id: I4cec9bb61159f6153690aaf39c1d12ba0baacf9b Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3886 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08jlink: Add EMUCOM supportMarc Schink
EMUCOM is a way to communicate with a J-Link device via so called channels. A channel can either be read or written in a single operation. Beside the reserved channels for SEGGER, there are channels available to implement vendor and/or device specific functionalities. For example, EMUCOM is used on many starter and development kits from Silicon Labs to access power measurements and various other information and settings. Change-Id: I6094109c043b34aed4a40ceabe71f30ff896bf1d Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3794 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08flash/nor/efm32: Support flash size smaller than 32kkevin
The current implementation fails on devices with less than 32k of flash (such as several devices in the Zero Gecko family) because the 'assert' assumes (incorrectly) that the number of flash banks will always be >= 32. This change ensures that at least one word of lock bits is always read in order to support devices with less than 32k of flash. Signed-off-by: Kevlar Harness <software@klystron.com> Change-Id: I59febe2cb690c893a5057a5f72918e146cf2afe4 Reviewed-on: http://openocd.zylin.com/3806 Tested-by: jenkins Reviewed-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08xscale: Move debug handler to contrib/loadersAndreas Fritiofson
Avoid special rules to generate array at compile time by shipping the generated file. Convert to Makefile build like the other loaders. Change-Id: I5a05edddcfaff3d395086cd3aa33120f8a7aa9dc Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3864 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08cortex_a: fix reset for SWD transportMatthias Welwarsky
Change b0698501b0e789091e9f9f1427b32af304888769 fixed reset for i.MX6 and TI Sitara SoCs but broke reset for cortex-a targets that use SWD. This patch is a work- around that forces asserting SRST when SWD is used. Change-Id: I7e39f2a469b9b4b2b74ad48ba49f2eeb58528921 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3641 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Remove build date from banner for releasesAndreas Fritiofson
In support for reproducible builds, see https://wiki.debian.org/ReproducibleBuilds Fixes Debian bug #834316. Change-Id: Id81ec72a87bf6dd99abfd2a0ae074658111bc9a3 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3866 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Remove unused BUILD_BITQ and BUILD_BITBANG defineAndreas Fritiofson
Change-Id: Ibfb5e414dd77d2ce4b835007722eb18da3820f3a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3668 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Remove conflicting CMSIS_DAP conditionalAndreas Fritiofson
It's already defined by PROCESS_ADAPTERS. Change-Id: I3bbcb0f77c645e9c5a98c2d5069c178358d1516b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3239 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Detect libftdi using pkgconfigAndreas Fritiofson
Auto-enable libftdi adapter drivers if found, just like libusb and hidapi based adapters. Change-Id: I71a10c90c8b999c4cae9b4f8fb5e97971d03083b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3238 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08cortex_m: allow setting debug ap during createMatthias Welwarsky
This patch adds a Cortex-M private configuration option that allows setting the acess point during target creation. This circumvents situations in hybrid systems when the correct access point can not be automatically detected. Change-Id: If313a5250e6e66509bb9080f3498feab7781dced Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3639 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08jtag/drivers/openjtag: Add support for Cypress CY7C65215Vianney le Clément de Saint-Marcq
The Cypress CY7C65215 Dual Channel USB-Serial Bridge Controller [1] understands the OpenJTAG protocol over a proprietary USB interface. This patch adds support for the CY7C65215 to the openjtag interface driver. A new configuration option, `openjtag_variant`, allows to select the transport to use. Libusb (1.x or 0.1) is now a hard dependency of the openjtag driver. This should not be a big issue as libftdi also depends on it. [1] http://www.cypress.com/?rID=82870 Change-Id: I55ffb3fd9e006eb311e405d9fb836bb119644bfd Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: http://openocd.zylin.com/2805 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08helper: Code cleanup for hexify()Marc Schink
Simplify hexify() and do not longer use 0 as special case for the parameter 'count' to determine the string length of the binary input. Instead, use strlen() outside of the function if needed. Additionally, fix the return value and return the length of the converted string. The old function always returned 2 * count. Also, use more appropriate data types for the function parameters and add a small documentation. Change-Id: I133a8ab786b8f7c1296afcaf9c0a0b43881e5112 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3793 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08jtag: drivers: bcm2835gpio: set 4ma drive, slow slew rateSean Cross
Both the drive strength and slew rate are currently set to very high values. This causes the waveforms to overshoot and be less reliable when operating at high speed. This patch lowers the slew rate and sets the drive strength to 4ma, improving the waveform output. Change-Id: I761d35cd64bc54a9e94043904ef00a003b056af0 Signed-off-by: Sean Cross <sean@xobs.io> Reviewed-on: http://openocd.zylin.com/3707 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Philipp Guehring <pg@futureware.at>
2016-12-08gdb_server: support qXfer:threads:read packetSteven Stallion
This patch adds support for the qXfer:threads:read packet. In addition to providing a more efficient method of updating thread state, recent versions of GDB (7.11.1 and up) can also report remote thread names. While thread names are not enabled in this patch due to its limited applicability at the moment, it can be enabled at a later date with little effort. As a part of revamping how threads are presented to GDB, extra info strings for each of the supported RTOSes were updated to match conventions present in the GDB source code. For more information, see remote_threads_extra_info() in remote.c. This results in a much smoother experience when interacting with GDB. It is also worth mentioning that use of qXfer:threads:read works around a number of regressions in older versions of GDB regarding remote thread display. Trust me, it's great. Change-Id: I97dd6a93c342ceb9b9d0023b6359db0e5604c6e6 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3559 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08semihosting: support fileio operationSteven Stallion
This patch adds support for bridging semihosting to GDB's File-I/O remote protocol extension. For the most part operations match up 1:1, however some require a working area to complete successfully, namely operations that devolve to read, stat, and gettimeofday. A new command was added to enable support for fileio named `arm semihosting_fileio`, which ensures that the default behavior remains intact for those that prefer it. Finally, redundant logging was removed from the target_arch_state function; this permits ARM targets to quiesce log output when polling for a fileio reply. This prevents filling the logs with halt/resume messages when using semihosting fileio. Change-Id: Ifbb864fc2373336a501cc0332675b887b552e1ee Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3566 Tested-by: jenkins Reviewed-by: Steven Stallion <sstallion@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08at91sam4: Add missing SAM4S family CHIPIDs and remove FWS=6.Owen Kirby
Add missing CHIPID values for all SAM4S parts listed in revision K of Atmel-11100-32-bit Cortex-M4-Microcontroller-SAM4S_Datasheet.pdf. I have also removed the FWS=6 workaround, as this appears to be a copy-paste error from the SAM3X family. Change-Id: I1ce1d82911f39d6fcb8f04034f5c9c9bf2818466 Signed-off-by: Owen Kirby <oskirby@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3837 Tested-by: jenkins
2016-12-08at91sam4: Add flash description and chipid for SAM4Cxx variants.Owen Kirby
Chip ID and flash layout taken from Atmel-11102F-ATARM-SAM4C32-SAM4C16-SAM4C8-SAM4C4-Datasheet_27-Mar-15 and tested on a SAM4C32-EK (rev A). Change-Id: I68aae5b60994c0b5964ea9031d40bc76ba025675 Signed-off-by: Owen Kirby <oskirby@gmail.com> Reviewed-on: http://openocd.zylin.com/3527 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08jtag: drivers: cmsis-dap: fix operation with SAMD10 Xplained boardPaul Fertser
Change-Id: I9164edeb83c9a9106e74798e98b9517177e83358 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3856 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08helper: Update jep106 database to JEP106ATAndreas Fritiofson
Change-Id: I2dac416189d16938597c073fd35ad654bca7484c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3871 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Cortex-R: Force usage of physical memory read/write since there is no MMUEvan Hunter
Change-Id: I69d6e6301ab66744258fe650a76c7241bebe00a8 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/3203 Tested-by: jenkins Reviewed-by: Girts Folkmanis <opensource@girts.me> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08rtos: add support for uC/OS-IIISteven Stallion
This patch introduces RTOS support for uC/OS-III. Currently, only FPU-less ARM Cortex-M targets are supported. Due to the configurability of the RTOS, an OpenOCD-specific file must be linked along with the project to determine the correct offsets within the OS_TCB structure. In addition to the above, a crash was fixed in rtos_get_gdb_reg_list such that RTOS support could be used between resets without restarting OpenOCD and support for the Hg packet was cleaned up. Change-Id: Ide004a689e6b886185df665c00fb644629eb31d1 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3556 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08target: Add verify_image_checksum commandMatthias Welwarsky
This avoids the secondary binary search if the checksum is different Change-Id: I986ba7687cea76f30e37a6bca58aabde18198263 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/2869 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08tcl/board: Add Infineon XMC4300 Relax EtherCAT Kit configAndreas Färber
Tested with "J-Link Lite-XMC4200 Rev.1 compiled Jul 18 2014 17:28:26". Change-Id: I31482734af7621593a244ffac9dd223408470609 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3876 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08xmc4xxx: Add support for XMC4300Andreas Färber
XMC4300 can reuse the existing XMC4700/XMC4800 sectors support. Add support for XMC4300 AA to the info command. Change-Id: Id929a51d20c73bd869a4457ffedc48ad5fa3f2df Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3875 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08dap_dp_init: remove loopJiri Kastner
current loop sounds to me like 'we don't know what we do, let's do it ten times, maybe we will have luck'. should be enough to 'ping' debug port using reading CRTL_STAT. tested on cortex-a8, snapdragon, jetson k1, cortex-r5, cortex-r4 Change-Id: Ibc62ac1eca06c141f4fccd5de7b11350ca1f35fd Signed-off-by: Jiri Kastner <cz172638@gmail.com> Tested-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/3193 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08cortex_a: remove partnum magic from arp_examine and dbginitMatthias Welwarsky
Depending on the Debug implementation the "OS Lock" feature might be implemented or not. It is not actually depending on the part number of the implemented ARM core but on the DBGOSLSR.OSLM bits. This patch removes querying the part number and implements proper parsing of OSLM. Result is a more generic approach that will work out-of-box on more devices. Change-Id: I79e052869c2f9af1d7fdedef42faddb7292e7332 Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on: http://openocd.zylin.com/3213 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Add -defer-examine option to target create commandMatthias Welwarsky
The '-defer-examine' option to target create allows declaring targets that are present on the chain, but not fully functional. They will be skipped by the initial arp_examine as well as arp_examine after reset. Manual examine using 'arp_examine' is needed to examine them, with the idea that some kind of actions is neeed to bring them to a state where examine will succeed (if at all possible). In order to allow value less options to target command, I had to relax the goi.argc check in jim_target_configure(). Change-Id: I9bf4e8d27eb6476dd9353d15f48965a8cfd5c122 Signed-off-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3076 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08tcl: Support for Analog Devices ADSP-SC58xPeter Lawrence
target tcl to enable debugging of ARM Cortex-A5 on ADSP-SC58x Change-Id: I378f8b94b7d6d6b9d0567985abc0e36aea7c8dea Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/3125 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2016-12-08flash/nor: at91samd protection bits write fixTomas Vanek
Flash protection set on a device with MANW=1 was lost after reset. Since #2903 the driver honored MANW bit and issued Write Page command just for main flash write. This change adds similar technique to samd_modify_user_row(). Minor code improvements: samd_check_error() returns error code corresponding to error type instead of bool. samd_check_error() does not clear STATUS register if no error bit is set. Eliminated double error check in call sequence samd_issue_nvmctrl_command() folowed by samd_check_error(). Missing error code ERROR_FLASH_PROTECTED added to src/flash/common.h. Change-Id: Icf59ab8803305d0cb3170c8a5089b8f9828b99f8 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3550 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-08tcl at91samdXX.cfg: update config to current OpenOCD statusTomas Vanek
Remove comment about workaround of not working 'reset halt' - not needed as 'reset halt' is working as expected @ EDBG with srst_only. Add srst_pulls_trst to reset_config as it no more triggers an error. Change-Id: I47cf445690c46ccfb866900cddbfcaefc8649f82 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3722 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-11-06Remove support for the GPL incompatible FTDI D2XX libraryAndreas Fritiofson
Convert Presto, OpenJTAG and USB-Blaster (I) adapter drivers to libftdi only. Change-Id: Ib28887620a3dcbb754b9dbf87b9731acca3ac600 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3237 Tested-by: jenkins Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-06Remove since long deprecated ft2232 driverAndreas Fritiofson
Purge all legacy interface configurations so there's no more confusion over which one to use. Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just duplicates what INSTALL says. Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3236 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-05Fix autogen.sh invocation of libjaylinkMarc Schink
Move autogen.sh invocation of libjaylink from the configure to the bootstrap script because the configure script is included in tarball releases but autotools are not required to be available on end-user machines. Thanks to Paul Fertser for spotting this. Change-Id: I5489ae83885157a01803eed51a7328e47d67ea6d Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3569 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05configure.ac: Fix J-Link adapter descriptionMarc Schink
The J-Link driver is not JTAG only and the correct spelling of the company is "SEGGER". Change-Id: Ic1062247d3bf0d564960f1ac6dfc86ffb34593e0 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3530 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05drivers/Makefile.am: Fix libjaylink integrationMarc Schink
Include libjaylink in DIST_SUBDIRS only if J-Link driver is enabled. Change-Id: Ib32bb6a5d8fe9bb6e93d968802733eb4973f2c25 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3529 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05configure.ac: Fix libjaylink integrationMarc Schink
Do not configure internal libjaylink if libusb-1.0 is not available or if J-Link driver is disabled (--disable-jlink). Change-Id: I021bca91dbbc33888a997c664f7836225306c3ef Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3528 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05Replace "daemon" with "server" in user-visible stringsPaul Fertser
Since OpenOCD doesn't fit most common definitions of the word "daemon", using it in the documentation is confusing. Reported by IRC user ohsix. Change-Id: I688d722771b084b17c2a7af8e83fd64bab6141b8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3634 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-11-05flash at91samd, at91sam4l: fix improper use of mem_ap_ callTomas Vanek
Since merge of #3149 OpenOCD start with an unresponsive SAMD or SAM4L resulted in segfaults. First was in cortex_m_assert_reset (fixed by #3552), second was in samd_handle_reset_deassert() /sam4l_handle_reset_deassert(). The change replaces mem_ap_write_u32/8 by target_write_u32/8. It also takes better care about examining and polling target before debug control registers are set. It prevents lockup when 'reset halt' is issued on unresponsive cpu. Change-Id: I2516489f4771aebfc1118d174f527497b8a201ad Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3603 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-11-04flash: nor: mdr: do not mass erase when clearing INFO memoryPaul Fertser
The MDR parts have two kinds of memory: main (regular memory-mapped memory for code and data) and "info" (not memory-mapped). When OpenOCD is requested to erase the info memory block, it should do just that, instead of erasing everything including main memory. Change-Id: I498142ca50d4a7b669b7776180b0dbcea63a5328 Reported-by: Eldar Khayrullin <eldar.khayrullin@mail.ru> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3853 Tested-by: jenkins Reviewed-by: Eldar Khayrullin <eldar.khayrullin@mail.ru> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04flash Kinetis: Family K8x addedTomas Vanek
Change-Id: I8c090a6fe6c204ce20622006490f896c2a55292f Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3614 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04flash Kinetis: add cache invalidate for KLx seriesTomas Vanek
Change-Id: I0177a052cbc380e01405dc139538b731b4f0ed62 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3565 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04flash Kinetis: longword programming changed to flash_async_algorithmTomas Vanek
Change-Id: I9c40acfad37760c3dab454f2432817b2d420792d Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3563 Reviewed-by: Steven Stallion <stallion@squareup.com> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04cortex_a/r/m: fix handling of un-examined coresMatthias Welwarsky
On multi-core systems, with some cores in power-down state, examination will fail for these cores. Make sure assert- and deassert_reset functions don't crash due to uninitialized variables. Change-Id: I472f8d19af2cd3c770c05f3e57a31b35a863b687 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3552 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-11-04AM335x: Disable watchdog on 'reset halt'Harald Welte
At least on my (phyCORE-AM335X) system, the AM335x watchdog needs to be disabled to use OpenOCD for more than 6.5 seconds after reset. Change-Id: I3d883a9f572b0ccb92f9864853a00c372e39d7f2 Signed-off-by: Harald Welte <laforge@gnumonks.org> Reviewed-on: http://openocd.zylin.com/3391 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-04semihosting armv7a: Add support for ARMv7-AAndrey Smirnov
Add semihosting support for ARMv7-A based processors. Tested with custom Vybrid VF610 based board and Pandaboard ES (Rev. B1) board (Cortex-A9). Change-Id: I6b896a61c1c6a1c5dcf89de834486f82dd6c80a2 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Tsung-Han Lin <tsunghan.tw@gmail.com> Reviewed-on: http://openocd.zylin.com/2908 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 21:31:46 +0000