aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-18zy1000: fixed link to Zylin ZY1000 JTAG ProbeBill Traynor
This patch fixes the link to the Zylin ZY1000 JTAG Probe webpage. The ZY1000 product line was acquired by Ultimate Solutions, Inc. in May 2011. Change-Id: If68cd45a0c47aa20b2e4bb62939b2c505c8c8c2e Signed-off-by: Bill Traynor <wmat@alphatroop.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/571 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-18pandaboard: add initial TCL support for pandaboard-esDavid Anders
add initial TCL support for the pandaboard-es which is based on the omap4460 from Texas Instruments. Change-Id: Ic63588721487feb95e7cb3d41cfaab0d2f181766 Signed-off-by: David Anders <danders.dev@gmail.com> Reviewed-on: http://openocd.zylin.com/573 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-18omap4460: add initial TCL support for the omap4460 es1.0David Anders
this patch adds the initial support for the omap4460 es1.0 version which is similar to the omap4430 and used on the pandaboard-es. Change-Id: If885f7d9f8809929bd799786b539e4f499fa3478 Signed-off-by: David Anders <danders.dev@gmail.com> Reviewed-on: http://openocd.zylin.com/572 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-18cfg: add stm32f0discovery board configSpencer Oliver
Change-Id: I4fccdbd4e0a3bc70cd425c910ad1007519098e20 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/570 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-04-13Glyn Tonga2: Faster JTAG speed after CPU/RAM init.Uwe Hermann
Change-Id: Ib08dae0035355138c468483a7ee2d73aadedf430 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/564 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-13stlink: correctly format printed hex addressesSpencer Oliver
Change-Id: I4a139989927249bb5e9dcc4804965c85c37cc09b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/559 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-04-13STM32L: Write partial-page flash data after full-page dataMathias K
The target address for the partial data needs to be bumped past the full page data. Otherwise, the partial data overwrites the start of the flash block. Change-Id: I1246b2fa8acbdb8193edcf7029309f11d1c6069c Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/555 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-04-10ft2232: Support for Digilent HS1 USB adapterStephane Bonnet
* Added support to the FT2232 driver for the FT2232H-based Digilent HS1 adapter. Change-Id: Iab6cc15f299badaf115615b5d4d785ecb2273c27 Signed-off-by: Stephane Bonnet <bonnetst@hds.utc.fr> Reviewed-on: http://openocd.zylin.com/558 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10cfg: add icnova_imx53_sodimm board configWjatscheslaw Stoljarski (Slawa)
Add board config for In-Circuit ICnova iMX53 SODIMM Change-Id: I3802ab1695baa75c1f170cf1af0e38ada284c0b8 Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com> Reviewed-on: http://openocd.zylin.com/543 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10cfg: add imx53loco board configWjatscheslaw Stoljarski (Slawa)
Add board config for iMX53QSB (loco) Change-Id: I8659dcd71a56d5fe855eaf62be0a415198b558c5 Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com> Reviewed-on: http://openocd.zylin.com/542 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10contrib/openocd.udev: fix warningAntonio Borneo
Fix following warning message logged by udev at start udevd[421]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/95-openocd.rules:81 Change-Id: I6de935c13a3327e3d718c110f97d19b9847ceca5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/552 Tested-by: jenkins Reviewed-by: Luca Bruno Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10Support for KaRo TX25 CPU Module on a StarterkitV base boardSimon Widmer
This patch adds support for the KaRo TX25 module on a StarterkitV base board. For board details, check http://www.karo-electronics.com/tx25.html Change-Id: I2c80c5467bc476955b55196728aa3c37c8185e6c Author: Simon Widmer <simonxwidmer@gmail.com> Signed-off-by: Mark Vels <mark.vels@team-embedded.nl> Reviewed-on: http://openocd.zylin.com/557 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10topic: add reset functions for SWDSimon Qian
Add swd_init_reset and swd_add_reset. Add adapter_assert_reset and adapter_deassert_reset, and call them instead of JTAG reset functions. Change-Id: Ib2551c6fbb45513e0ae0dc331cfe3ee3f922298a Signed-off-by: Simon Qian <simonqian.openocd@gmail.com> Reviewed-on: http://openocd.zylin.com/526 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10doxygen: remove warningsSpencer Oliver
Change-Id: I020845a8df7b67f3b6c1a233b3ee07a5d14fa685 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/556 Tested-by: jenkins
2012-04-10Finish off functions mips32_pracc_read_mem16() and mips32_pracc_read_mem8()Salvador
This functions are unfinished and work only with parameter count up to 1024. Commands mdh and mdb from pic32mx context show values not related to memory content if parameter count is bigger than 1024. Firt 1024 are ok. Change-Id: Ie3f4d4a0f9d1d1a69bd3a18de2f72dd9249514cb Signed-off-by: Salvador <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/550 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2012-04-10Minor bug fixes in Mips32 codeSalvador
Now the the "Fast" version for memory blank check in pic32mx.c can be called: default_flash_blank_check() instead of the "fallback" default_flash_mem_blank_check(). The command "verify_image", without working area, now don't show: checksum mismatch - attempting binary compare when there are no real errors in flash. Change-Id: I256e8ae949289634e1de5c1c2861e4c4c4b7fdce Signed-off-by: Salvador <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/549 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-04docs: add gerrit server urlSpencer Oliver
Change-Id: If39b522594a4ee3758fb85309af01f7a98c9f939 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/553 Tested-by: jenkins
2012-04-04docs: remove unused primer refSpencer Oliver
we already have a link to the patch primer in the main index. Change-Id: Ib90ade76a17f5d99da8fe481d8f87c68eca38f1c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/546 Tested-by: jenkins
2012-04-04tools/initial.shUlf Samuelsson
Small script to setup Gerrit with the local repository Usage: tools/initial.sh <username> Change-Id: I26527c35cfe040c7752efec06064d5dc9e3ec6a2 Signed-off-by: Ulf Samuelsson <ulf@emagii.com> Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/290 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-02Initial config for the Voltcraft DSO-3062C.Uwe Hermann
This is a digital oscilloscope which uses a Samsung S3C2440 internally. http://randomprojects.org/wiki/Voltcraft_DSO-3062C Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Change-Id: I5e28c3a8f30665a162e34c831294e4e658a16ebb Reviewed-on: http://openocd.zylin.com/548 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-31Add value "openbsd" for ocd_HOSTOS.Wim Lewis
Change-Id: I9b0dd87d85c0792730f507176001d39c44da7117 Signed-off-by: Wim Lewis <wiml@hhhh.org> Reviewed-on: http://openocd.zylin.com/547 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-30jimtcl: update to version 0.73Spencer Oliver
Change-Id: I9c943abb3ec5148b9cb24d0823f7787066948201 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/536 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-30armv7m: fix broken stlink buildSpencer Oliver
The stlink partially supports the cortex-m4 fp regs and requires these defines to build. Change-Id: Id3aa802ecc7006cb6d9f84b79ab3c21af24c1001 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/545 Tested-by: jenkins
2012-03-30stm32: Update register read/write to the register definition.Mathias K
This patch fix the register index on read/write register. Change-Id: I7b52a927a48259d6f497ac0f474aff7ff1529e9a Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/525 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30armv7m: detect floating point featureMathias K
This patch add fp feature detection on cortex-m4. Change-Id: I99e9d1bf5534630a22b8ad9c878165683db2d0ba Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/524 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30build: correctly quote m4 parametersSpencer Oliver
Change-Id: I8fbef892caa78dba5324a8bc28d2a4a4854b1f48 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/544 Tested-by: jenkins
2012-03-30cfg: add support for STM3220G-EVAL onboard STLINKSpencer Oliver
Change-Id: Icd7a1baf6f2623e5b57d29c4602a2762af730936 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/541 Tested-by: jenkins
2012-03-30cfg: add STM32F4x and STM3241G-EVAL config filesSpencer Oliver
This adds support for the STM32F4 target and the STM3241G Eval Board, in both standalone and using the onboard STLINK. Change-Id: I62f8908b5880568b2b36c78a78f94c40861ff335 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/540 Tested-by: jenkins
2012-03-30scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delaySpencer Oliver
Change-Id: Idf98526d64dcba4d8a5b6910bd3c539756753e8e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/539 Tested-by: jenkins
2012-03-30Added tcl config scripts for SAM3A/X targets and devboardOlivier Schonken
The SAM3A/X processors that were released thus far is either a SAM3A/X(4) - 256K, or a SAM3A/X(8) - 512K device. Thus the config files are per variant, and not per device. Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Change-Id: I84d26d044e810eb428b1d6287907ea3bf8364c73 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/522 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30docs: update release docs to use configure.acSpencer Oliver
Change-Id: I7b52ad1c3744a82832c5b55898bf47607e24d03e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/538 Tested-by: jenkins
2012-03-30tools: update release scripts to use configure.acSpencer Oliver
we have already updated autoconf to use configure.ac instead of configure.in, so update release.sh to use the new name. Change-Id: I2dc2beaf2f85058c4627183bc093052677ccba1b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/537 Tested-by: jenkins
2012-03-30topic: Flash support for Pic32mx1xx/2xxSalvador Arroyo
Change-Id: I496cb745fb1eb5c9159471838013b8d19418f5c0 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/500 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30Create a init_board procedure for the ea dev board.Chris Morgan
Signed-off-by: Chris Morgan <chmorgan@gmail.com> Change-Id: I082b0d3092c7f3b2ee6b68af64d48c78b31f1dbf Reviewed-on: http://openocd.zylin.com/510 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30transport: remove interface multiple transport warningSpencer Oliver
Currently if we have multiple transport's defined we receive an warning similar to: must select a transport. allow transport 'jtag' allow transport 'swd This removes that warning and only prints this info if transport_init fails. Change-Id: I87126390f234bc2f705e1f150a0dcc110dcab151 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/532 Tested-by: jenkins
2012-03-30Bug in src/target/mips32_pracc.cSalvador
The bug shows up with the command "mdw addres count" and only if count>1024 (count>0x400). The first 1024 values shows as expected, but the rest of the values are wrong. Name of variable bytesread" is changed to "wordsread" to reflect what really does. Change-Id: Iad79393e72da2637551c5ae6e829e3873605c520 Signed-off-by: Salvador <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/527 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19Add warn message if no flash bank found for the current image address.Mathias K
Add a warn message to inform the user that something is wrong with the flash settings or command parameters. Change-Id: Ia55868b2abf2a17845e51620b0f29b2809d841c2 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/280 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19gdb_server: Simple close the connection and not exit openocd.Mathias K
This patch let openocd running and only close the gdb connection on error. Change-Id: Ifb88e16834b51207cc4c82210eab904ed8d30b71 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/523 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19gdb_server: Fix wrong index/length compare.Mathias K
This patch fix the compare for the list size and the register index. Change-Id: I36d5e078f57d2a9f7823cfdf0d537762e00f6929 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/516 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19rtos: add sanity checking for FreeRTOS's quantity of prioritiesPaul Fertser
On operating systems with opportunistic malloc() (e.g. default setting in GNU/Linux) malloc can sometimes allocate a huge memory region but later the process will get killed on the first attempt to use this memory, so checking for malloc's return value is not enough to prevent a crash. This patch is compile-tested only. Change-Id: I5e21663115c8e9a0ca9f3d71f7ba4bd09e5c3bb1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/521 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19rtos: fix segfault in FreeRTOS handlingPaul Fertser
When gdb loads an elf file of a newer or older version of the firmware being debugged, or when the firmware is not running yet, there's a high probability of FreeRTOS variables to be read incorrectly, thus leading to an attempt to allocate an enourmous amount of memory. Without this check OpenOCD simply crashes and that's mad confusing. Change-Id: I404a072e886d2d47d9d942cfaea8417eb8bd4a5d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/520 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14stlink: fix alignment build warningAlexandre Pereira da Silva
The {read,write}_mem32 interface functions was asking a 32 bits buffer but they don't need 32 bits alignment. This will change the interface to a 8 bits buffer to remove the alignment mismatch warning. This was causing build errors on platforms with strict aliasing rules. Change-Id: I338be8df5686f07a64ddb4f17c1bb494af583999 Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-on: http://openocd.zylin.com/483 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14gdb_server: sanity check the gdb register sizeMathias K
This patch checks the received register length with the local configured register length and disconnect on a length missmatch. Change-Id: I6b112c6b55a9ffb4526f582a384ffa91dc8b792f Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/517 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14armv7m: Add a dummy register at the end of the register list.Mathias K
Signed-off-by: Mathias K <kesmtp@freenet.de> Change-Id: I0bfad091bd8adabd949fc0a74ef3a08a514eb307 Reviewed-on: http://openocd.zylin.com/519 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-03-14stm32: Add floating point register read/write.Mathias K
This patch add floating point register read/write functionality through the SCS debug interface. Change-Id: Id20e109dd7cccba00671d55ca8aabeb4936cceb9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/512 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14stm32: determine all cpu types and use common examineMathias K
This patch determine all cpu types and not only the cortex M3 and the stm32 target use the common target examine function from the cortex_m sources. Change-Id: If689dd994b3855284b927fc4b206f420cf32b6c7 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/511 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14flash: Fix flash write algorithm on pflash only devices.Mathias K
This patch fix the slow flash write issue on pflash only devices. The Family Reference Manual says: For devices with FlexNVM: FlexRAM For devices with program flash only: Programming acceleration RAM So the acceleration RAM is available for the flash section command on this device. Change-Id: If6541a23a4457c5ed8858848a145f35cac63138b Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/509 Tested-by: jenkins Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14Automatically prepend v1 mass storage protocol.Mathias K
This patch prepend the v1 mass storage protocol to the command buffer and simplify the usb read/write handling. Change-Id: I709602600e93cd1eb5848fa9f4d15659ba85eb35 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/506 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14mips: Forced to running state to enable (subsequent) target halt.Drasko DRASKOVIC
Change-Id: I9aff8fb3ac703b50194088dd4e68cec8f9bb2ada Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Reviewed-on: http://openocd.zylin.com/513 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14cfg: correct pic32mx config typo'sSpencer Oliver
Change-Id: Ibe5b6b0efefc7cfc75d789eb7e9c7ee239526ae2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/508 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 01:53:54 +0000