aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2014-01-09command: Fix formatting for empty usage stringAndreas Fritiofson
Introduced by requirement in 54d6330b. Change-Id: If3dba057127b54b15ca7f364f37c6286d34f77e0 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1858 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl/netgear-dg834v3.cfg: add to easy firmware recovery listPaul Fertser
Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1851 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tools: add firmware recovery helpersPaul Fertser
This adds a set of helper functions with the aim to make it possible to flash mass-market devices without RTFMing altogether (i.e. to obsolete GPL-violating proprietary tjtag and other similar software). Real-life tested on an RT-N16 and WRT54GL. Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl/board: add Linksys WRT54GL v1.1 board configPaul Fertser
Tested flashing a real v1.1 device. Change-Id: Ie0d202b9fded8b92e731d93e0ef17be415a75fc8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1852 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl: add bcm47xx config and Asus RT-N16 board using itPaul Fertser
This adds the bcm47xx config with the special undocumented trick to put it into standard EJTAG mode from the mystic "LV mode". The RAM setup is not done as it would require considerable efforts without much practical gain. The only issue I noticed so far is that "reset" doesn't actually reset the chip. Unfortunately, it's unclear how to make it work properly with SRST as OpenOCD asserts it in MIPS-specific code so the device will enter LV mode again but the LV tap is already disabled by that time, so it's not possible to send the magic command again. Anyway, this config is more than enough to "recover" any RT-N16 provided the hardware is not damaged. Change-Id: I0894e339763e6d20d1c93341c597382b479d039b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1849 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Allow "tcl_port" to be run after config to simply display the port.Robert P. J. Day
To be consistent with gdb_port and telnet_port, allow tcl_port to be run to display the configured port number, while still not allowing the user to change it after configuration. Change-Id: Ibe6aedb3bd447f2985e42dd8246358481a047dd6 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1857 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Update URLs and names in amdm37x.cfg, no functional changes.Robert P. J. Day
* openocd.berlios.de -> openocd.sourceforge.net * Update link to AM/DM37x Technical Reference Manual (ver R) * "ICEpick" is properly spelled "ICEPick" according to TI Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1856 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Numerous pedantic fixes to the User's Guide, including typo fixes,Robert P. J. Day
grammar fixes and so on. Change-Id: Iaeb603447ecd9f77f1d49ce77044431442f4f219 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1855 Reviewed-by: Bill Traynor <btraynor@gmail.com> Tested-by: jenkins Reviewed-by: Francois Lorrain <francois.lorrain@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-31jtag_vpi: make the server address configurableFranck Jullien
Change-Id: I58e89c789b79ffb0b54ef94d208be876c271ddf7 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1840 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-30target/image: allow for comments in IHEX filesFranck Jullien
This is not in the Intel hex file format specification but some hex files may include comments (i.e. Altera USB-Blaster II firmware) starting with '#'. This patch makes image_ihex_buffer_complete_inner to skip comment lines. Change-Id: Id1f57d84d75da45e592f1c72b2b8c29193bc14e3 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1842 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-30topic: Added Spansion S25FL128S and S25FL256S spifi devices.Steve Moorby
S25FL256S device tested on mbest LPC4357 EVM, S25S128S untested but from the same data sheet. Change-Id: Idf58416aab08671fe29d22c3c34c2118b25a9d45 Signed-off-by: Steve Moorby <steve.moorby60@gmail.com> Reviewed-on: http://openocd.zylin.com/1844 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-12-22kinetis : Add timeouts to flash status checking in dap_syssec_kinetis_mdmap().Per Ekman
Change-Id: Ifc8fe7aa4c2a40a78fa0655435e82418f549bad3 Signed-off-by: Per Ekman <pekenator@gmail.com> Reviewed-on: http://openocd.zylin.com/1819 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22stlink: remove stlink_api commandMathias K
Remove stlink_api command. Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1760 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22kinetis : Detect MCU flash parameters based on the SDID register.Per Ekman
Try to detect the flash parameters based on the MCU SDID register. The hope is that this works for K and KL series MCUs but it has only been tested on a K21. YMMV. Change-Id: Idfe71383a449065267f393b09ee3c3b24ac6a803 Signed-off-by: Per Ekman <pekenator@gmail.com> Reviewed-on: http://openocd.zylin.com/1823 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Add %APPDATA%\OpenOCD to script search path on winAndreas Fritiofson
Change-Id: I01e9715fe064f3ff41e41a59a4764d6474f82183 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1797 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Remove special handling of script search path on WindowsAndreas Fritiofson
On all platforms, search for scripts in $HOME/.openocd ${run_prefix}${pkgdatadir}/site ${run_prefix}${pkgdatadir}/scripts On Windows, set run_prefix to the runtime path of the executable, minus ${bindir}. This is to enable the install dir to be moved anywhere, as long as the structure of the install dir is kept intact. On all other platforms, run_prefix is empty. The script paths can now be adjusted on Windows builds the normal way; by overriding pkgdatadir at build time. For example, to create a Windows package layout of bin/openocd.exe scripts/interface/... scripts/target/... you can do configure --prefix= --enable-... and then make pkgdatadir= DESTDIR=/some/path clean all install Also, remove the unused PKGLIBDIR define. Change-Id: If2c8228fc80c598d763efad21c5f51695ff9b6cf Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1796 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22target/imx6: Fix typo in setting _SJC_TAPID from SJC_TAPID variableAlex Murray
The set command was missing the $ prefix on the SJC_TAPID variable and so would fail if SJC_TAPID was set Change-Id: Ib9af58f5188bd8a2bc3f888309f203d624476c27 Signed-off-by: Alex Murray <alex.murray@cohdawireless.com> Reviewed-on: http://openocd.zylin.com/1811 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Avoid 'may be used uninitialized' warning from FreeBSD base GCCEd Maste
Change-Id: Ice2472bf7a467652485a5a8c36880c6a47d64c6c Signed-off-by: Ed Maste <emaste@freebsd.org> Reviewed-on: http://openocd.zylin.com/1835 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22build: remove hard coded ftdi and usb librariesMathias K
This patch remove the hardcoded libraries. Also a check for libftdi1 installations was added. This check fix an issue with gentoo and maybe other systems. Change-Id: Ieff9ec4d66ee0f3e6b22261a10e4cab9f26b6b51 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1759 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22jtag_vpi: fix build errors under MinGWFranck Jullien
Change-Id: Ic13f9982014ead811e2f2d737ca1621e0e85577e Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1839 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-19target: add kl25z HLA (stlink) configPaul Fertser
Based on Nemuisan Tokusei's. Untested, but original config was reported to work ok. Change-Id: Ic991dce55bfca266880081fe2bbd9e6e263b0fc0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1803 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17at91sam7sx.cfg: fix use $_TARGETNAME as target identifier, not '0' warningSergey A. Borshch
all other at91 cfg files already has this fix. It also fix "No flash at address 0x...." error when JTAG chain consist of more than one at91sam7sx cores during attempt to flash other than first mcu in chain. Change-Id: I7785d9103d0fc494b6a823e2c73f850373ffe112 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on: http://openocd.zylin.com/1812 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17cfg: Add new BSTAPID for STM32F42xxx and STM32F43xxx seriesNemui Trinomius
STM32F42xxx & STM32F43xxx series boudary scan TAP-ID are differ from STM32F405xx/07xx & STM32F415xx/17xx. And Section number was also fixed for RM0090 rev5. Tested on a STM32F427IIT6 and STM32F429ZIT6. Change-Id: Ie9c54c55b97b9c396ace752d94ea2ad916cc8479 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1808 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17fix flash bank auto_probe() fail with multiple targetsSergey A. Borshch
get_flash_bank_by_addr() iterates through all flash banks trying to auto_probe() every bank, even if bank can belongs to target other than requested, and this other target can be in non-halted state, which leads to error message and operation abort. Same situation in gdb_new_connection() and gdb_memory_map(): get_flash_bank_by_num() tries to auto_probe() requested bank, so first get bank by get_flash_bank_by_num_noprobe(), check if it belongs to current connection's target and skip get_flash_bank_by_num() (actually autoprobing) if not. Change-Id: I48b3f93dddcd9283394f14ad2de3248397c75ab3 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on: http://openocd.zylin.com/1813 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-12-17versaloon: Finish support for serial number matchingAndreas Fritiofson
Add a command to specify the serial string and pass it to the find helper. Actual matching was already supported for both serial and product but was using hard coded string indices. Instead use the indices from the device descriptor. Change-Id: I17c7538e5ad301ef41eace1ee70a202adab23bb4 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1816 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14tcl/target: add config for Milandr's 1986ве1т controllerPaul Fertser
This is a Cortex-M1 controller targetting aviation appliances. Contributed (and live-tested) by 8daemon. Change-Id: I133d6122cf6492b51ddbdbd800c16ba121d51bf3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1818 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14ftdi/neodb.cfg: mark as testedPaul Fertser
Working against openmoko gta02 target, including TRST and SRST (the stupid samsung chip fully resets under trst, so it's actually of little use here). Change-Id: I831124659fc12efbccef536f07d15509c2112f92 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1814 Tested-by: jenkins Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14topic: Support for the Xilinx BSCAN_* Virtual JTAG in OpenriscSergio Chico
This add support to the Xilinx BSCAN_* virtual JTAG interface. This is the Xilinx equivalent of the Altera sld_virtual_jtag interface, it allows a user to connect to the debug unit through the main FPGA JTAG connection. Change-Id: Ia438e910650cff9cbc8f810b719fc1d5de5a8188 Signed-off-by: Sergio Chico <sergio.chico@gmail.com> Reviewed-on: http://openocd.zylin.com/1806 Tested-by: jenkins Reviewed-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14stm32lx_dual_bank.cfg: fix typo in file pathAndrey Yurovsky
s/stm32l1x/stm32lx ...this makes tm32lx_dual_bank.cfg work again. Change-Id: I04dc617523caa6b46c675fe9b700d1bbe88170e6 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1832 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14flash: revert incorrect stm32f1 default_padded_valueSpencer Oliver
Commit 2493671e2d9c352ea70edc8665b4c8f172ef1141 added a default flash padded value to the wrong file, should have been stm32lx.c not stm32f1x.c. Change-Id: Idab634a03ccb28609cc977a92ac2b138d1e8d859 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1833 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-12-01NULL check before dereferencingLuca BRUNO
Check reg_list[i]->feature for NULL pointers before checking feature->name in order to avoid NULL access. Change-Id: If20401a6c5aa5e1e29f0fcf9bb95585b49658832 Signed-off-by: Luca BRUNO <lucab@debian.org> Reviewed-on: http://openocd.zylin.com/1809 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se> Reviewed-by: Jens Bauer <jens@gpio.dk>
2013-12-01[PATCH 1/2]support64: Add functions into types and targetDongxue Zhang
Add functions into types.h, target.c, target.h to operate 64bits data. Prepare for 64bits mips target. Change-Id: I668a8a5ac12ba754ae310fa6e92cfc91af850b1c Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Reviewed-on: http://openocd.zylin.com/1700 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-12-01Add byte-swap helpersAndreas Fritiofson
Change-Id: I970616bb0e2bbc693165a0d311840febbd9134f1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1798 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se> Reviewed-by: Franck Jullien <franck.jullien@gmail.com>
2013-11-08kinetis : Add flash sector size detection for K21 MCU.Per Ekman
The current way of detecting the sector size of the internal flash does not work for all Kinetis MCUs. Add support for the K21 flash by detecting the specific model from the SDID register and picking the correct sector size based on that. Change-Id: I41f678353e45a44561af8a3398bdd4479dfeea4f Signed-off-by: Per Ekman <pekenator@gmail.com> Reviewed-on: http://openocd.zylin.com/1764 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-08kinetis : Add flash read support to the kinetis nor flash driver.Per Ekman
The default_flash_read() function seems to work ok. Change-Id: Ia34c4642405f669ff63310fa8c641098b771a401 Signed-off-by: Per Ekman <pekenator@gmail.com> Reviewed-on: http://openocd.zylin.com/1763 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-08kinetis : Fix broken check for mass erase.Per Ekman
If the flash is not ready (MDM_STAT_FREADY is 0) then dap_syssec_kinetis_mdmap() would act as if the MDM_STAT_SYSSEC bit was set and erase the flash. Wait until MDM_STAT_FREADY is set before checking the MDM_STAT_SYSSEC bit. Change-Id: I5c3352f625599016625ed9be8787033f49bfacea Signed-off-by: Per Ekman <pekenator@gmail.com> Reviewed-on: http://openocd.zylin.com/1762 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-07hla: Make consistent parameter namingMathias K
Rename fd to handle. Change-Id: I98615aed1546976d00b0f20856d4e8e75f83c575 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1761 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-07target: use target_buffer_set_u32_arraySpencer Oliver
Attempt to use target_buffer_set_u32_array to convert to target endian arrays rather reimplementing code. This also removed cfi_fix_code_endian as its functionality is also repeated. Change-Id: I7c359dbe46ea791cd5f6fb18d8b0fb6895c599d3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1783 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-11-06ulink: Fix libusb include changed since pkg-config mergeAndreas Fritiofson
Change-Id: I1556aaf117f99de046e3c16d5386faaaefdfefd8 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1795 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2013-11-06jtag: fix support for really long scansPaul Fertser
When programming large FPGAs the generated SVF files might contain really long SDR scans. They won't fit in the 1MiB jtag scan page at all, so in this case the allocated page needs to be bigger. The current code was silently corrupting memory. One particular example was sent by Volter targetting XC3S4000. It has an SDR 11316992 bits long, that is 1414624 bytes. Change-Id: I39f18d7e0654f2dbdf37df58c837c9ec1fb2aa2a Reported-by: "Voltner, Jiří" <j.voltner@era.aero> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1792 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06stm32l flash: add another device IDAndrey Yurovsky
Add device ID 0x437, a dual-bank part with 512KB total. This one used the Medium+/HD flash size register to read the flash size in Kb rather than the 0/1 code in the Medium+ parts. Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Change-Id: I870fe3bb1b473939b7211c3b2edb44b4b3643648 Reviewed-on: http://openocd.zylin.com/1790 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06add TI TMS570 support scriptsAndrey Yurovsky
Add support for the TMS570 Cortex-R4 MCU from TI and their USB stick development kit, TMDX570LS31USB. Tested attaching, reset/halt/run, and reading and writing memory and registers. Change-Id: I12d779cef0c2b834f9bcf722307f35677cc4bd8f Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1788 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06fm3: fix Fujitsu MB9Ax family supportNemui Trinomius
Some MB9Ax (especially few internal SRAM model) fails programming because of wrong SRAM basic-address on running algorithm. Default SRAM basic-address must be 0x20000000. This patch is fixing default SRAM basic-address and ramcode offset. Tested on a MB9BF618T and MB9AF112K. Change-Id: Ibda9aceb4c317bcae0dcce9f6d0fd1c4b5d81952 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1793 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06Correct argument numbering in trace commandAlan Bowman
The trace command was opening a file named with the source frequency. This change correctly passes the filename that is specified. Change-Id: Ia2eb8eda0e1e0f4f44b05c3a0ce7bef3bda51446 Signed-off-by: Alan Bowman <alan.michael.bowman@gmail.com> Reviewed-on: http://openocd.zylin.com/1800 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-05lpcspifi: Fix byte order bugAndreas Fritiofson
Found by grepping for pointer casts. Change-Id: I42ef3ebcce9fc6391154888b48601ede8377c34e Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1771 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31target: fix mem2array/array2memMathias K
if data size is bigger than transfer buffer, all portions are transferred from/to the same target address - address advance after successful transmission missed. Change-Id: I79a6c388af197ac062d2807e397a2d7947400520 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1679 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2013-10-31smp: Fix byte order bugAndreas Fritiofson
Found by grepping for pointer casts. Also rewrite to reduce scope and allocate the few bytes needed on stack instead of on heap. Change-Id: Ia2a369fb612e807b981ee60ebcfd9c09c2fbdf4c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1779 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31ti_icdi_usb: Remove unnecessary casts and fix byte order bugsAndreas Fritiofson
Found by grepping for pointer casts. Some additional cast can be removed if hexify/unhexify arguments are changed to a more suitable type. Change-Id: I13796b056f00976979bf0e754de3aa7648f7f321 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1778 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31ioutil: Remove unnecessary casts and fix const-discardingAndreas Fritiofson
Using the right parameter type, there's no need to resort to casting. Change-Id: I8aec852431ead26e24793fd6fac8781353963bf2 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1777 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Jens Bauer <jens@gpio.dk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 05:43:57 +0000