diff options
Diffstat (limited to 'tcl/board/glyn_tonga2.cfg')
| -rw-r--r-- | tcl/board/glyn_tonga2.cfg | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/tcl/board/glyn_tonga2.cfg b/tcl/board/glyn_tonga2.cfg index 17ed3cf2..31aa9ff5 100644 --- a/tcl/board/glyn_tonga2.cfg +++ b/tcl/board/glyn_tonga2.cfg @@ -19,12 +19,12 @@ source [find target/tmpa900.cfg] # Initial JTAG speed should not exceed 1/6 of the initial CPU clock # frequency (24MHz). Be conservative and use 1/8 of the frequency. # (24MHz / 8 = 3MHz) -adapter_khz 3000 +adapter speed 3000 $_TARGETNAME configure -event reset-start { # Upon reset, set the JTAG frequency to 3MHz again, see above. echo "Setting JTAG speed to 3MHz until clocks are initialized." - adapter_khz 3000 + adapter speed 3000 # Halt the CPU. halt @@ -41,7 +41,7 @@ $_TARGETNAME configure -event reset-init { # Tests showed that 15MHz works OK, higher speeds can cause problems, # though. Not sure if this is a CPU issue or JTAG adapter issue. echo "Increasing JTAG speed to 15MHz." - adapter_khz 15000 + adapter speed 15000 # Enable faster memory access. arm7_9 fast_memory_access enable |