diff options
| -rw-r--r-- | configure.ac | 12 | ||||
| -rw-r--r-- | doc/manual/jtag/drivers/remote_bitbang.txt | 53 | ||||
| -rw-r--r-- | doc/openocd.texi | 37 | ||||
| -rw-r--r-- | src/jtag/drivers/Makefile.am | 3 | ||||
| -rw-r--r-- | src/jtag/drivers/remote_bitbang.c | 286 | ||||
| -rw-r--r-- | src/jtag/interfaces.c | 6 |
6 files changed, 397 insertions, 0 deletions
diff --git a/configure.ac b/configure.ac index b6c04ab4..ec51bd7e 100644 --- a/configure.ac +++ b/configure.ac @@ -498,6 +498,10 @@ if test $build_zy1000 = yes; then fi AC_MSG_RESULT($build_zy1000) +AC_ARG_ENABLE(remote-bitbang, + AS_HELP_STRING([--enable-remote-bitbang], [Enable building support for the Remote Bitbang jtag driver]), + [build_remote_bitbang=$enableval], [build_remote_bitbang=no]) + AC_MSG_CHECKING([whether to enable dummy minidriver]) if test $build_minidriver_dummy = yes; then @@ -778,6 +782,13 @@ if test "$use_internal_jimtcl" = yes; then fi fi +if test $build_remote_bitbang = yes; then + build_bitbang=yes + AC_DEFINE(BUILD_REMOTE_BITBANG, 1, [1 if you want the Remote Bitbang JTAG driver.]) +else + AC_DEFINE(BUILD_REMOTE_BITBNAG, 0, [0 if you don't want the Remote Bitbang JTAG driver.]) +fi + #-- Deal with MingW/Cygwin FTD2XX issues if test $is_win32 = yes; then @@ -1075,6 +1086,7 @@ AM_CONDITIONAL(VSLLINK, test $build_vsllink = yes) AM_CONDITIONAL(RLINK, test $build_rlink = yes) AM_CONDITIONAL(ULINK, test $build_ulink = yes) AM_CONDITIONAL(ARMJTAGEW, test $build_armjtagew = yes) +AM_CONDITIONAL(REMOTE_BITBANG, test $build_remote_bitbang = yes) AM_CONDITIONAL(BUSPIRATE, test $build_buspirate = yes) AM_CONDITIONAL(USB, test $build_usb = yes) AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes) diff --git a/doc/manual/jtag/drivers/remote_bitbang.txt b/doc/manual/jtag/drivers/remote_bitbang.txt new file mode 100644 index 00000000..5a800479 --- /dev/null +++ b/doc/manual/jtag/drivers/remote_bitbang.txt @@ -0,0 +1,53 @@ +/** @remote_bitbangpage OpenOCD Developer's Guide + +The remote_bitbang JTAG driver is used to drive JTAG from a remote process. The +remote_bitbang driver communicates via TCP or UNIX sockets with some remote +process using an ASCII encoding of the bitbang interface. The remote process +presumably then drives the JTAG however it pleases. The remote process should +act as a server, listening for connections from the openocd remote_bitbang +driver. + +The remote bitbang driver is useful for debugging software running on +processors which are being simulated. + +The bitbang interface consists of the following functions. + +blink on + Blink a light somewhere. The argument on is either 1 or 0. + +read + Sample the value of tdo. + +write tck tms tdi + Set the value of tck, tms, and tdi. + +reset trst srst + Set the value of trst, srst. + +An additional function, quit, is added to the remote_bitbang interface to +indicate there will be no more requests and the connection with the remote +driver should be closed. + +These five functions are encoded in ascii by assigning a single character to +each possible request. The assignments are: + + B - Blink on + b - Blink off + R - Read request + Q - Quit request + 0 - Write 0 0 0 + 1 - Write 0 0 1 + 2 - Write 0 1 0 + 3 - Write 0 1 1 + 4 - Write 1 0 0 + 5 - Write 1 0 1 + 6 - Write 1 1 0 + 7 - Write 1 1 1 + r - Reset 0 0 + s - Reset 0 1 + t - Reset 1 0 + u - Reset 1 1 + +The read response is encoded in ascii as either digit 0 or 1. + + */ diff --git a/doc/openocd.texi b/doc/openocd.texi index 8b7e5888..05c06b87 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2321,6 +2321,43 @@ ft2232_vid_pid 0x0403 0xbdc8 @end example @end deffn +@deffn {Interface Driver} {remote_bitbang} +Drive JTAG from a remote process. This sets up a UNIX or TCP socket connection +with a remote process and sends ASCII encoded bitbang requests to that process +instead of directly driving JTAG. + +The remote_bitbang driver is useful for debugging software running on +processors which are being simulated. + +@deffn {Config Command} {remote_bitbang_port} number +Specifies the TCP port of the remote process to connect to or 0 to use UNIX +sockets instead of TCP. +@end deffn + +@deffn {Config Command} {remote_bitbang_host} hostname +Specifies the hostname of the remote process to connect to using TCP, or the +name of the UNIX socket to use if remote_bitbang_port is 0. +@end deffn + +For example, to connect remotely via TCP to the host foobar you might have +something like: + +@example +interface remote_bitbang +remote_bitbang_port 3335 +remote_bitbang_host foobar +@end example + +To connect to another process running locally via UNIX sockets with socket +named mysocket: + +@example +interface remote_bitbang +remote_bitbang_port 0 +remote_bitbang_host mysocket +@end example +@end deffn + @deffn {Interface Driver} {usb_blaster} USB JTAG/USB-Blaster compatibles over one of the userspace libraries for FTDI chips. These interfaces have several commands, used to diff --git a/src/jtag/drivers/Makefile.am b/src/jtag/drivers/Makefile.am index 805d1a49..408ea810 100644 --- a/src/jtag/drivers/Makefile.am +++ b/src/jtag/drivers/Makefile.am @@ -81,6 +81,9 @@ endif if BUSPIRATE DRIVERFILES += buspirate.c endif +if REMOTE_BITBANG +DRIVERFILES += remote_bitbang.c +endif noinst_HEADERS = \ bitbang.h \ diff --git a/src/jtag/drivers/remote_bitbang.c b/src/jtag/drivers/remote_bitbang.c new file mode 100644 index 00000000..d3ab1b11 --- /dev/null +++ b/src/jtag/drivers/remote_bitbang.c @@ -0,0 +1,286 @@ +/*************************************************************************** + * Copyright (C) 2011 by Richard Uhler * + * ruhler@mit.edu * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <sys/socket.h> +#include <sys/un.h> +#include <netdb.h> +#include <jtag/interface.h> +#include "bitbang.h" + +// from unix man page and sys/un.h: +#define UNIX_PATH_MAX 108 + +// arbitrary limit on host name length: +#define REMOTE_BITBANG_HOST_MAX 255 + +#define REMOTE_BITBANG_RAISE_ERROR(expr ...) \ + LOG_ERROR(expr); LOG_ERROR("Terminating openocd."); exit(-1); + +static char remote_bitbang_host[REMOTE_BITBANG_HOST_MAX] = "openocd"; +static uint16_t remote_bitbang_port = 0; + +FILE* remote_bitbang_in; +FILE* remote_bitbang_out; + +static void remote_bitbang_putc(int c) +{ + if (EOF == fputc(c, remote_bitbang_out)) { + REMOTE_BITBANG_RAISE_ERROR("remote_bitbang_putc: %s", strerror(errno)); + } +} + +static int remote_bitbang_quit(void) +{ + if (EOF == fputc('Q', remote_bitbang_out)) { + LOG_ERROR("fputs: %s", strerror(errno)); + return ERROR_FAIL; + } + + if (EOF == fflush(remote_bitbang_out)) { + LOG_ERROR("fflush: %s", strerror(errno)); + return ERROR_FAIL; + } + + // We only need to close one of the FILE*s, because they both use the same + // underlying file descriptor. + if (EOF == fclose(remote_bitbang_out)) { + LOG_ERROR("fclose: %s", strerror(errno)); + return ERROR_FAIL; + } + + LOG_INFO("remote_bitbang interface quit"); + return ERROR_OK; +} + +// Get the next read response. +static int remote_bitbang_rread(void) +{ + if (EOF == fflush(remote_bitbang_out)) { + remote_bitbang_quit(); + REMOTE_BITBANG_RAISE_ERROR("fflush: %s", strerror(errno)); + } + + int c = fgetc(remote_bitbang_in); + switch (c) { + case '0': return 0; + case '1': return 1; + default: + remote_bitbang_quit(); + REMOTE_BITBANG_RAISE_ERROR( + "remote_bitbang: invalid read response: %c(%i)", c, c); + } +} + +static int remote_bitbang_read(void) +{ + remote_bitbang_putc('R'); + return remote_bitbang_rread(); +} + +static void remote_bitbang_write(int tck, int tms, int tdi) +{ + char c = '0' + ((tck ? 0x4 : 0x0) | (tms ? 0x2 : 0x0) | (tdi ? 0x1 : 0x0)); + remote_bitbang_putc(c); +} + +static void remote_bitbang_reset(int trst, int srst) +{ + char c = 'r' + ((trst ? 0x2 : 0x0) | (srst ? 0x1 : 0x0)); + remote_bitbang_putc(c); +} + +static void remote_bitbang_blink(int on) +{ + char c = on ? 'B' : 'b'; + remote_bitbang_putc(c); +} + +static struct bitbang_interface remote_bitbang_bitbang = { + .read = &remote_bitbang_read, + .write = &remote_bitbang_write, + .reset = &remote_bitbang_reset, + .blink = &remote_bitbang_blink, +}; + +static int remote_bitbang_speed(int speed) +{ + return ERROR_OK; +} + +static int remote_bitbang_init_tcp(void) +{ + LOG_INFO("Connecting to %s:%i", remote_bitbang_host, remote_bitbang_port); + int fd = socket(PF_INET, SOCK_STREAM, 0); + if (fd < 0) { + LOG_ERROR("socket: %s", strerror(errno)); + return ERROR_FAIL; + } + + struct hostent* hent = gethostbyname(remote_bitbang_host); + if (hent == NULL) { + char* errorstr = "???"; + switch (h_errno) { + case HOST_NOT_FOUND: errorstr = "host not found"; break; + case NO_ADDRESS: errorstr = "no address"; break; + case NO_RECOVERY: errorstr = "no recovery"; break; + case TRY_AGAIN: errorstr = "try again"; break; + } + LOG_ERROR("gethostbyname: %s", errorstr); + return ERROR_FAIL; + } + + struct sockaddr_in addr; + addr.sin_family = AF_INET; + addr.sin_port = htons(remote_bitbang_port); + addr.sin_addr = *(struct in_addr*)hent->h_addr; + if (connect(fd, (struct sockaddr*)&addr, sizeof(struct sockaddr_in)) < 0) { + LOG_ERROR("connect: %s", strerror(errno)); + return ERROR_FAIL; + } + + remote_bitbang_in = fdopen(fd, "r"); + if (remote_bitbang_in == NULL) { + LOG_ERROR("fdopen: failed to open read stream"); + return ERROR_FAIL; + } + + remote_bitbang_out = fdopen(fd, "w"); + if (remote_bitbang_out == NULL) { + LOG_ERROR("fdopen: failed to open write stream"); + return ERROR_FAIL; + } + + LOG_INFO("remote_bitbang driver initialized"); + return ERROR_OK; +} + +static int remote_bitbang_init_unix(void) +{ + LOG_INFO("Connecting to unix socket %s", remote_bitbang_host); + int fd = socket(PF_UNIX, SOCK_STREAM, 0); + if (fd < 0) { + LOG_ERROR("socket: %s", strerror(errno)); + return ERROR_FAIL; + } + + struct sockaddr_un addr; + addr.sun_family = AF_UNIX; + strncpy(addr.sun_path, remote_bitbang_host, UNIX_PATH_MAX); + addr.sun_path[UNIX_PATH_MAX-1] = '\0'; + + if (connect(fd, (struct sockaddr*)&addr, sizeof(struct sockaddr_un)) < 0) { + LOG_ERROR("connect: %s", strerror(errno)); + return ERROR_FAIL; + } + + remote_bitbang_in = fdopen(fd, "r"); + if (remote_bitbang_in == NULL) { + LOG_ERROR("fdopen: failed to open read stream"); + return ERROR_FAIL; + } + + remote_bitbang_out = fdopen(fd, "w"); + if (remote_bitbang_out == NULL) { + LOG_ERROR("fdopen: failed to open write stream"); + return ERROR_FAIL; + } + + LOG_INFO("remote_bitbang driver initialized"); + return ERROR_OK; +} + +static int remote_bitbang_init(void) +{ + bitbang_interface = &remote_bitbang_bitbang; + + LOG_INFO("Initializing remote_bitbang driver"); + if (remote_bitbang_port == 0) { + return remote_bitbang_init_unix(); + } + return remote_bitbang_init_tcp(); +} + +static int remote_bitbang_khz(int khz, int* jtag_speed) +{ + *jtag_speed = 0; + return ERROR_OK; +} + +static int remote_bitbang_speed_div(int speed, int* khz) +{ + // I don't think this really matters any. + *khz = 1; + return ERROR_OK; +} + + +COMMAND_HANDLER(remote_bitbang_handle_remote_bitbang_port_command) +{ + if (CMD_ARGC == 1) { + COMMAND_PARSE_NUMBER(u16, CMD_ARGV[0], remote_bitbang_port); + return ERROR_OK; + } + return ERROR_COMMAND_SYNTAX_ERROR; +} + +COMMAND_HANDLER(remote_bitbang_handle_remote_bitbang_host_command) +{ + if (CMD_ARGC == 1) { + strncpy(remote_bitbang_host, CMD_ARGV[0], REMOTE_BITBANG_HOST_MAX); + remote_bitbang_host[REMOTE_BITBANG_HOST_MAX-1] = '\0'; + return ERROR_OK; + } + return ERROR_COMMAND_SYNTAX_ERROR; +} + + +static const struct command_registration remote_bitbang_command_handlers[] = { + { + .name = "remote_bitbang_port", + .handler = remote_bitbang_handle_remote_bitbang_port_command, + .mode = COMMAND_CONFIG, + .help = "Set the port to use to connect to the remote jtag.\n" + " if 0, use unix sockets to connect to the remote jtag.", + .usage = "port_number", + }, + { + .name = "remote_bitbang_host", + .handler = remote_bitbang_handle_remote_bitbang_host_command, + .mode = COMMAND_CONFIG, + .help = "Set the host to use to connect to the remote jtag.\n" + " if port is 0, this is the name of the unix socket to use.", + .usage = "host_name", + }, + COMMAND_REGISTRATION_DONE, +}; + +struct jtag_interface remote_bitbang_interface = { + .name = "remote_bitbang", + .execute_queue = &bitbang_execute_queue, + .speed = &remote_bitbang_speed, + .commands = remote_bitbang_command_handlers, + .init = &remote_bitbang_init, + .quit = &remote_bitbang_quit, + .khz = &remote_bitbang_khz, + .speed_div = &remote_bitbang_speed_div, +}; diff --git a/src/jtag/interfaces.c b/src/jtag/interfaces.c index dbc69d07..76a4e8d1 100644 --- a/src/jtag/interfaces.c +++ b/src/jtag/interfaces.c @@ -97,6 +97,9 @@ extern struct jtag_interface armjtagew_interface; #if BUILD_BUSPIRATE == 1 extern struct jtag_interface buspirate_interface; #endif +#if BUILD_REMOTE_BITBANG == 1 +extern struct jtag_interface remote_bitbang_interface; +#endif #endif // standard drivers /** @@ -163,6 +166,9 @@ struct jtag_interface *jtag_interfaces[] = { #if BUILD_BUSPIRATE == 1 &buspirate_interface, #endif +#if BUILD_REMOTE_BITBANG == 1 + &remote_bitbang_interface, +#endif #endif // standard drivers NULL, }; |