diff options
| -rw-r--r-- | tcl/board/rigado_bmd300_ek.cfg | 2 | ||||
| -rw-r--r-- | tcl/interface/stlink-dap.cfg | 2 | ||||
| -rw-r--r-- | tcl/target/infineon/tle987x.cfg | 2 | ||||
| -rw-r--r-- | tcl/target/stm32wbx.cfg | 8 | ||||
| -rw-r--r-- | tcl/target/swm050.cfg | 2 |
5 files changed, 8 insertions, 8 deletions
diff --git a/tcl/board/rigado_bmd300_ek.cfg b/tcl/board/rigado_bmd300_ek.cfg index 04e5e1f4..8e1e65ed 100644 --- a/tcl/board/rigado_bmd300_ek.cfg +++ b/tcl/board/rigado_bmd300_ek.cfg @@ -6,6 +6,6 @@ source [find interface/jlink.cfg] transport select swd -adapter_khz 1000 +adapter speed 1000 source [find target/nrf52.cfg] diff --git a/tcl/interface/stlink-dap.cfg b/tcl/interface/stlink-dap.cfg index f889f74e..4576ad38 100644 --- a/tcl/interface/stlink-dap.cfg +++ b/tcl/interface/stlink-dap.cfg @@ -6,7 +6,7 @@ # Old ST-LINK/V1 and ST-LINK/V2 pre version V2J24 don't support this method # -interface st-link +adapter driver st-link st-link vid_pid 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 # transport select dapdirect_jtag diff --git a/tcl/target/infineon/tle987x.cfg b/tcl/target/infineon/tle987x.cfg index 00cb1c03..84cc2380 100644 --- a/tcl/target/infineon/tle987x.cfg +++ b/tcl/target/infineon/tle987x.cfg @@ -33,4 +33,4 @@ if { ![using_hla] } { cortex_m reset_config sysresetreq } -adapter_khz 1000 +adapter speed 1000 diff --git a/tcl/target/stm32wbx.cfg b/tcl/target/stm32wbx.cfg index 138bcf18..90f53bb9 100644 --- a/tcl/target/stm32wbx.cfg +++ b/tcl/target/stm32wbx.cfg @@ -55,9 +55,9 @@ flash bank $_FLASHNAME stm32l4x 0 0 0 0 $_TARGETNAME # # Note that there is a pretty wide band where things are # more or less stable, see http://openocd.zylin.com/#/c/3366/ -adapter_khz 500 +adapter speed 500 -adapter_nsrst_delay 100 +adapter srst delay 100 if {[using_jtag]} { jtag_ntrst_delay 100 } @@ -77,12 +77,12 @@ $_TARGETNAME configure -event reset-init { mmw 0x58004000 0x00000102 0 ;# FLASH_ACR |= PRFTBE | 2(Latency) mmw 0x58000000 0x00000091 0 ;# RCC_CR = MSI_ON | MSI Range 24 MHz # Boost JTAG frequency - adapter_khz 4000 + adapter speed 4000 } $_TARGETNAME configure -event reset-start { # Reset clock is MSI (4 MHz) - adapter_khz 500 + adapter speed 500 } $_TARGETNAME configure -event examine-end { diff --git a/tcl/target/swm050.cfg b/tcl/target/swm050.cfg index 2c4ab34f..e6f2ecbf 100644 --- a/tcl/target/swm050.cfg +++ b/tcl/target/swm050.cfg @@ -29,7 +29,7 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME swm050 0x0 0x2000 0 0 $_TARGETNAME -adapter_khz 1000 +adapter speed 1000 $_TARGETNAME configure -event reset-init { # Stop the watchdog, just to be safe |