diff options
| author | Peter Lawrence <majbthrd@gmail.com> | 2015-11-27 17:28:16 -0600 |
|---|---|---|
| committer | Paul Fertser <fercerpav@gmail.com> | 2016-12-08 12:22:07 +0000 |
| commit | ab9d92490cf37fb4cbb394f85d7c8385474dff3f (patch) | |
| tree | da8a94e92ddeb10cf6021021e7435f273443800a /tcl | |
| parent | 4732471b2e122357403fbcaa53fb712db0d8235e (diff) | |
tcl: Support for Analog Devices ADSP-SC58x
target tcl to enable debugging of ARM Cortex-A5 on ADSP-SC58x
Change-Id: I378f8b94b7d6d6b9d0567985abc0e36aea7c8dea
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: http://openocd.zylin.com/3125
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Diffstat (limited to 'tcl')
| -rw-r--r-- | tcl/target/adsp-sc58x.cfg | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/tcl/target/adsp-sc58x.cfg b/tcl/target/adsp-sc58x.cfg new file mode 100644 index 00000000..369137ed --- /dev/null +++ b/tcl/target/adsp-sc58x.cfg @@ -0,0 +1,45 @@ +# Analog Devices ADSP-SC58x (ARM Cortex-A5 plus one or two SHARC+ DSPs) + +# evaluation boards by Analog Devices (and designs derived from them) use a non-standard 10-pin 0.05" ARM Cortex Debug Connector +# pin 9 (GND or GNDDetect) has been usurped with JTAG /TRST +# as a result, a standards-compliant debug pod will only force the processor's debug interface into reset, preventing usage +# so, a connector adapter must be employed on these boards to isolate or otherwise prevent /TRST from being asserted + +transport select swd +source [find target/swj-dp.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME ADSP-SC58x +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x3BA02477 +} + +swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_a -endian $_ENDIAN -chain-position $_TARGETNAME + +$_TARGETNAME configure -event examine-end { + global _TARGETNAME + sc58x_enabledebug $_TARGETNAME +} + +proc sc58x_enabledebug {target} { + # Enable debugging functionality by setting relevant bits in the TAPC_DBGCTL register + # the "phys" option is critical; the OpenOCD Cortex-A target code prevents normal mww when the target is not halted + # however, it is not possible to halt the target unless these register bits have been set + $target mww phys 0x31131000 0xFFFF +} + |