diff options
| author | Vivien Didelot <vivien.didelot@savoirfairelinux.com> | 2016-09-21 11:16:47 -0400 |
|---|---|---|
| committer | Andreas Fritiofson <andreas.fritiofson@gmail.com> | 2016-10-17 09:16:33 +0100 |
| commit | 9d98f8b7a7d0a4c1d50c1d5d9df62dc2d0ede26c (patch) | |
| tree | a1e99c37a554add715d417c7df1cd8d44aeefc25 /tcl/tools | |
| parent | 537c019ced7dd91ad1fd9ac58908d94f24650357 (diff) | |
tcl/board: add Linksys WAG200G config
The Linksys WAG200G router has a TI AR7 SoC and a 4MB Flash layout
similar to the Netgear DG834v3 router [1].
Below is an example of a successful flash recovery, using a TUMPA,
connected to the MIPS EJTAG 2.6 header (JP102) of the router.
WAG200G [2] TUMPA [3]
Desc Pin Pin Desc
------------------------
nTRST 1 3 nTRST
TDI 3 5 TDI
TDO 5 13 TDO
TMS 7 7 TMS
TCK 9 9 TCK
nSRST 11 15 RST
GND 2 4 GND
Note that nSRST is optional to halt the CPU, but is required to probe
the flash. For instance, recover the kernel with:
$ sudo ./src/openocd -s tcl \
-f interface/ftdi/tumpa.cfg \
-f tools/firmware-recovery.tcl \
-c 'board linksys-wag200g;
reset_config srst_only;
flash_part kernel /path/to/kernel.bin;
shutdown'
[1] https://wiki.openwrt.org/toh/linksys/wag200g
[2] https://www.linux-mips.org/wiki/JTAG#JTAG_headers
[3] http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User's_Manual#20_PIN_JTAG_Connector
Change-Id: I952ba9f706e2e4f8f95ca03a5fa58f391ca030b6
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-on: http://openocd.zylin.com/3776
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Diffstat (limited to 'tcl/tools')
| -rw-r--r-- | tcl/tools/firmware-recovery.tcl | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/tcl/tools/firmware-recovery.tcl b/tcl/tools/firmware-recovery.tcl index 6e23540f..8e017ce5 100644 --- a/tcl/tools/firmware-recovery.tcl +++ b/tcl/tools/firmware-recovery.tcl @@ -4,6 +4,7 @@ echo "Use -c firmware_help to get help\n" set known_boards { "asus-rt-n16 ASUS RT-N16" "asus-rt-n66u ASUS RT-N66U" + "linksys-wag200g Linksys WAG200G" "linksys-wrt54gl Linksys WRT54GL v1.1" "netgear-dg834v3 Netgear DG834G v3" "tp-link_tl-mr3020 TP-LINK TL-MR3020" |