diff options
| author | Antonio Borneo <borneo.antonio@gmail.com> | 2019-08-23 15:51:00 +0200 |
|---|---|---|
| committer | Oleksij Rempel <linux@rempel-privat.de> | 2020-01-29 06:34:43 +0000 |
| commit | 38ac08c1c25adf42cf20e48e10e6ddeab6a12d71 (patch) | |
| tree | 4bfcc09b2f97bb1202aa3a4b4a02f9515ef7ed63 /tcl/target/stm32f7x.cfg | |
| parent | 0d598535a30ea553f5a5d4a0047010807fcc5996 (diff) | |
tcl: replace the deprecated commands with "adapter ..."
Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)
Minor indentation issue fixed manually in
tcl/board/at91sam9g20-ek.cfg
tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Diffstat (limited to 'tcl/target/stm32f7x.cfg')
| -rwxr-xr-x | tcl/target/stm32f7x.cfg | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/tcl/target/stm32f7x.cfg b/tcl/target/stm32f7x.cfg index ba1d12ff..db1794c1 100755 --- a/tcl/target/stm32f7x.cfg +++ b/tcl/target/stm32f7x.cfg @@ -65,9 +65,9 @@ flash bank $_CHIPNAME.otp stm32f2x 0x1ff0f000 0 0 0 $_TARGETNAME flash bank $_CHIPNAME.itcm-flash.alias virtual 0x00200000 0 0 0 $_TARGETNAME $_FLASHNAME # adapter speed should be <= F_CPU/6. F_CPU after reset is 16MHz, so use F_JTAG = 2MHz -adapter_khz 2000 +adapter speed 2000 -adapter_nsrst_delay 100 +adapter srst delay 100 if {[using_jtag]} { jtag_ntrst_delay 100 } @@ -162,12 +162,12 @@ $_TARGETNAME configure -event reset-init { if {[using_jtag]} { [[target current] cget -dap] memaccess 16 } { - adapter_khz 8000 + adapter speed 8000 } } $_TARGETNAME configure -event reset-start { # Reduce speed since CPU speed will slow down to 16MHz with the reset - adapter_khz 2000 + adapter speed 2000 } |