diff options
author | Freddie Chopin <freddie_chopin@op.pl> | 2010-12-01 22:55:56 +0100 |
---|---|---|
committer | Øyvind Harboe <oyvind.harboe@zylin.com> | 2010-12-02 18:53:03 +0100 |
commit | a1ce28b118e758015a4e8ba1cb74815aa4193ee0 (patch) | |
tree | 73c31a1702864de76af435537a20c5cc764b453e /tcl/target/at91sam7se512.cfg | |
parent | 778b789c8ed44faadfb572c9a0eebb4e4a76a3aa (diff) |
rename some target scripts to be consistent with the rest
Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...)
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
Diffstat (limited to 'tcl/target/at91sam7se512.cfg')
-rw-r--r-- | tcl/target/at91sam7se512.cfg | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/tcl/target/at91sam7se512.cfg b/tcl/target/at91sam7se512.cfg new file mode 100644 index 00000000..c48afeff --- /dev/null +++ b/tcl/target/at91sam7se512.cfg @@ -0,0 +1,40 @@ + +# ATMEL sam7se512 +# Example: the "Elektor Internet Radio" - EIR +# http://www.ethernut.de/en/hardware/eir/index.html + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME sam7se512 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +# The target +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi + +$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>] +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432 + |