From a1ce28b118e758015a4e8ba1cb74815aa4193ee0 Mon Sep 17 00:00:00 2001 From: Freddie Chopin Date: Wed, 1 Dec 2010 22:55:56 +0100 Subject: rename some target scripts to be consistent with the rest Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...) Signed-off-by: Freddie Chopin --- tcl/target/at91sam7se512.cfg | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 tcl/target/at91sam7se512.cfg (limited to 'tcl/target/at91sam7se512.cfg') diff --git a/tcl/target/at91sam7se512.cfg b/tcl/target/at91sam7se512.cfg new file mode 100644 index 00000000..c48afeff --- /dev/null +++ b/tcl/target/at91sam7se512.cfg @@ -0,0 +1,40 @@ + +# ATMEL sam7se512 +# Example: the "Elektor Internet Radio" - EIR +# http://www.ethernut.de/en/hardware/eir/index.html + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME sam7se512 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +# The target +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi + +$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank [ ] +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432 + -- cgit v1.2.3-18-g5258