diff options
author | Oleksij Rempel <linux@rempel-privat.de> | 2018-12-26 12:47:11 +0100 |
---|---|---|
committer | Tomas Vanek <vanekt@fbl.cz> | 2019-01-02 21:53:41 +0000 |
commit | 8f777bc1a66b5f604fde8bbdbe64206413c8aa1c (patch) | |
tree | 968c75c1e586b5c7a7d841e7033b31d250e52876 /tcl/board/tp-link_wdr4300.cfg | |
parent | 08e64a828c10d5583162aa59266eef9507520401 (diff) |
flash: nor: ath79: remove base calculation
Currently it is impossible to flash ELF with correct offsets. The reason
is a bogus offset calculation extracted from base.
Since any other spi drivers do not care about base, do the same for
ath79 as well.
Change-Id: I9e46e01c9e7a709c2d07da9203c634f302603afd
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4821
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Diffstat (limited to 'tcl/board/tp-link_wdr4300.cfg')
-rw-r--r-- | tcl/board/tp-link_wdr4300.cfg | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/tcl/board/tp-link_wdr4300.cfg b/tcl/board/tp-link_wdr4300.cfg index c3179162..7aa79aba 100644 --- a/tcl/board/tp-link_wdr4300.cfg +++ b/tcl/board/tp-link_wdr4300.cfg @@ -157,4 +157,4 @@ $_TARGETNAME configure -event reset-init { set ram_boot_address 0xa0000000 $_TARGETNAME configure -work-area-phys 0x1d000000 -work-area-size 0x1000 -flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0 +flash bank flash0 ath79 0xbf000000 0 0 0 $_TARGETNAME cs0 |