diff options
| author | Tarek BOCHKATI <tarek.bouchkati@gmail.com> | 2019-12-04 15:09:51 +0100 |
|---|---|---|
| committer | Antonio Borneo <borneo.antonio@gmail.com> | 2020-03-12 09:46:43 +0000 |
| commit | a154973896576ae59952785e7b2137fb17dac7da (patch) | |
| tree | 130e47514999e9d69fcdc80789fc119e58f21f9f /src | |
| parent | 4845b5437284b964aad40b1cec57324732abb4d5 (diff) | |
target/aarch64: fix soft breakpoint when PE is in AArch32 state
Before this patch aarch64_set_breakpoint was using either A64, or A32
HLT opcode by relying on armv8_opcode helper.
This behaviors ignores the fact that in AArch32 state the core could
execute Thumb-2 instructions, and gdb could request to insert a soft
bkpt in a Thumb-2 code chunk.
In this change, we check the core_state and bkpt length to know the
correct opcode to use.
Note: based on https://sourceware.org/gdb/current/onlinedocs/gdb/ARM-Breakpoint-Kinds.html
if bkpt length/kind == 3, we should replace a 32-bit Thumb-2 opcode,
then we use twice the 16 bits Thumb-2 bkpt opcode and we fix-up the
length to 4 bytes, in order to set correctly the bpkt.
Change-Id: I8f3551124412c61d155eae87761767e9937f917d
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5355
Tested-by: jenkins
Reviewed-by: Muhammad Omair Javaid <omair.javaid@linaro.org>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Diffstat (limited to 'src')
| -rw-r--r-- | src/target/aarch64.c | 25 | ||||
| -rw-r--r-- | src/target/armv8_opcodes.h | 1 |
2 files changed, 25 insertions, 1 deletions
diff --git a/src/target/aarch64.c b/src/target/aarch64.c index 4d3d9819..3918b157 100644 --- a/src/target/aarch64.c +++ b/src/target/aarch64.c @@ -1263,9 +1263,32 @@ static int aarch64_set_breakpoint(struct target *target, brp_list[brp_i].value); } else if (breakpoint->type == BKPT_SOFT) { + uint32_t opcode; uint8_t code[4]; - buf_set_u32(code, 0, 32, armv8_opcode(armv8, ARMV8_OPC_HLT)); + if (armv8_dpm_get_core_state(&armv8->dpm) == ARM_STATE_AARCH64) { + opcode = ARMV8_HLT(11); + + if (breakpoint->length != 4) + LOG_ERROR("bug: breakpoint length should be 4 in AArch64 mode"); + } else { + /** + * core_state is ARM_STATE_ARM + * in that case the opcode depends on breakpoint length: + * - if length == 4 => A32 opcode + * - if length == 2 => T32 opcode + * - if length == 3 => T32 opcode (refer to gdb doc : ARM-Breakpoint-Kinds) + * in that case the length should be changed from 3 to 4 bytes + **/ + opcode = (breakpoint->length == 4) ? ARMV8_HLT_A1(11) : + (uint32_t) (ARMV8_HLT_T1(11) | ARMV8_HLT_T1(11) << 16); + + if (breakpoint->length == 3) + breakpoint->length = 4; + } + + buf_set_u32(code, 0, 32, opcode); + retval = target_read_memory(target, breakpoint->address & 0xFFFFFFFFFFFFFFFE, breakpoint->length, 1, diff --git a/src/target/armv8_opcodes.h b/src/target/armv8_opcodes.h index 3fda2966..217cc64c 100644 --- a/src/target/armv8_opcodes.h +++ b/src/target/armv8_opcodes.h @@ -153,6 +153,7 @@ #define ARMV8_BKPT(Im) (0xD4200000 | ((Im & 0xffff) << 5)) #define ARMV8_HLT(Im) (0x0D4400000 | ((Im & 0xffff) << 5)) #define ARMV8_HLT_A1(Im) (0xE1000070 | ((Im & 0xFFF0) << 4) | (Im & 0xF)) +#define ARMV8_HLT_T1(Im) (0xba80 | (Im & 0x3f)) #define ARMV8_MOVFSP_64(Rt) ((1 << 31) | 0x11000000 | (0x1f << 5) | (Rt)) #define ARMV8_MOVTSP_64(Rt) ((1 << 31) | 0x11000000 | (Rt << 5) | (0x1F)) |