diff options
| author | Oleksij Rempel <linux@rempel-privat.de> | 2018-12-26 12:47:11 +0100 |
|---|---|---|
| committer | Tomas Vanek <vanekt@fbl.cz> | 2019-01-02 21:53:41 +0000 |
| commit | 8f777bc1a66b5f604fde8bbdbe64206413c8aa1c (patch) | |
| tree | 968c75c1e586b5c7a7d841e7033b31d250e52876 /doc | |
| parent | 08e64a828c10d5583162aa59266eef9507520401 (diff) | |
flash: nor: ath79: remove base calculation
Currently it is impossible to flash ELF with correct offsets. The reason
is a bogus offset calculation extracted from base.
Since any other spi drivers do not care about base, do the same for
ath79 as well.
Change-Id: I9e46e01c9e7a709c2d07da9203c634f302603afd
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4821
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 83f60520..21b55dca 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5347,12 +5347,12 @@ since the alternate function must be enabled on the GPIO pin CS1/CS2 is routed to on the given SoC. @example -flash bank $_FLASHNAME ath79 0 0 0 0 $_TARGETNAME +flash bank $_FLASHNAME ath79 0xbf000000 0 0 0 $_TARGETNAME # When using multiple chipselects the base should be different for each, # otherwise the write_image command is not able to distinguish the # banks. -flash bank flash0 ath79 0x00000000 0 0 0 $_TARGETNAME cs0 +flash bank flash0 ath79 0xbf000000 0 0 0 $_TARGETNAME cs0 flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1 flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2 @end example |