diff options
author | Spencer Oliver <spen@spen-soft.co.uk> | 2013-09-19 12:07:06 +0100 |
---|---|---|
committer | Spencer Oliver <spen@spen-soft.co.uk> | 2013-10-07 19:28:19 +0000 |
commit | 1f3ca0b5b81d9f9e4565cf177797a17ad37ef2c3 (patch) | |
tree | a5352260d013eb75ee04c864ba2c2ea2c2f6ee56 /doc | |
parent | 53ca124a754fd0d2bb18fb26ac69c5654c81117d (diff) |
flash: add padded_value cmd
This adds support for setting the default value used when padding image
sections. Previously 0xff was used but some targets have an erased value
of 0x00.
Change-Id: If3df6fea3abf95b09daa3ff7be362acf991070ce
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1635
Tested-by: jenkins
Diffstat (limited to 'doc')
-rw-r--r-- | doc/openocd.texi | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 003ec4ff..a2bcaf85 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -4862,6 +4862,12 @@ specifies "to the end of the flash bank". The @var{num} parameter is a value shown by @command{flash banks}. @end deffn +@deffn Command {flash padded_value} num value +Sets the default value used for padding any image sections, This should +normally match the flash bank erased value. If not specified by this +comamnd or the flash driver then it defaults to 0xff. +@end deffn + @anchor{program} @deffn Command {program} filename [verify] [reset] [offset] This is a helper script that simplifies using OpenOCD as a standalone |