Age | Commit message (Collapse) | Author |
|
For some reason the hasPath() test is failing on an archive created the libtool where each file starts with ".libs/". Seems safe enough to just always try to create directories. Not tested on any other archives.
|
|
It was just a less powerful and more confusing version of
MCCFIInstruction. A side effect is that, since MCCFIInstruction uses
dwarf register numbers, calls to getDwarfRegNum are pushed out, which
should allow further simplifications.
I left the MachineModuleInfo::addFrameMove interface unchanged since
this patch was already fairly big.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181680 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181509 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
It was only implemented for ELF where it collected the Addend, so this
patch also renames it to getRelocationAddend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181502 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- requires existing debug information to be present
- fixes up file name and line number information in metadata
- emits a "<orig_filename>-debug.ll" succinct IR file (without !dbg metadata
or debug intrinsics) that can be read by a debugger
- initialize pass in opt tool to enable the "-debug-ir" flag
- lit tests to follow
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181467 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181354 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The alignment is just a byte in the middle of Characteristics, not an
independent flag. Making it an independent field in the yaml
representation makes it more yamlio friendly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181243 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Jun Koi!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181231 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This takes the linking of almost all modules in a clang build from 6:32
to 0:19.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181105 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Update comments, fix * placement, fix method names that are not
used in clang, add a linkInModule that takes a Mode and put it
in Linker.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181099 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The linker is now responsible only for actually linking the modules, it
is up to the clients to create and destroy them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181098 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181096 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181095 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181079 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Build attribute sections can now be read if they exist via ELFObjectFile, and
the llvm-readobj tool has been extended with an option to dump this information
if requested. Regression tests are also included which exercise these features.
Also update the docs with a fixed ARM ABI link and a new link to the Addenda
which provides the build attributes specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181009 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180967 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180949 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
For Mach-O there were 2 implementations for parsing object files. A
standalone llvm/Object/MachOObject.h and llvm/Object/MachO.h which
implements the generic interface in llvm/Object/ObjectFile.h.
This patch adds the missing features to MachO.h, moves macho-dump to
use MachO.h and removes ObjectFile.h.
In addition to making sure that check-all is clean, I checked that the
new version produces exactly the same output in all Mach-O files in a
llvm+clang build directory (including executables and shared
libraries).
To test the performance, I ran macho-dump over all the files in a
llvm+clang build directory again, but this time redirecting the output
to /dev/null. Both the old and new versions take about 4.6 seconds
(2.5 user) to finish.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180624 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
getRelocationAddress is for dynamic libraries and executables,
getRelocationOffset for relocatable objects.
Mark the getRelocationAddress of COFF and MachO as not implemented yet. Add a
test of ELF's. llvm-readobj -r now prints the same values as readelf -r.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180259 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180247 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
While here, don't report a dummy symbol for relocations that don't have symbols.
We used to says such relocations were for the first defined symbol, but now we
return end_symbols(). The llvm-readobj output change agrees with otool.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180214 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
LTO was always creating an empty llvm.compiler.used. With this patch we
now first check if there is anything to be added first.
Unfortunately, there is no good way to test libLTO in isolation as it needs gold
or ld64, but there are bots doing LTO builds that found this problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180202 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180137 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The COFFParser now contains only a COFFYAML::Object and the string table
(which is recomputed, not serialized).
The structs in COFFParser now all begin with a Header field with what is
actually on the COFF object. The other fields are things that are semantically
part of the struct (relocations in a section for exmaple), but are not actually
represented that way in the object file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180134 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180115 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180007 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180006 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180005 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is part of a future patch to use yamlio that incorrectly ended up in a
cleanup patch.
Thanks to Benjamin Kramer for reporting it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179938 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179923 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179922 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179921 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
* using namespace llvm.
* whitespace.
* early return.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179920 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Instead, use MappingNormalization to directly parse COFF::header. Also change
the naming convention of the helper classes to be a bit shorter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179917 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Use MappingNormalization to read a COFF::relocation directly.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179891 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Thanks to Evgeniy Stepanov for reporting this.
It might be a good idea to add a command iterator abstraction to MachO.h, but
this fixes the bug for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179848 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We are still able to handle mixed endian objects by swapping one struct at a
time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179778 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Differential Revision: http://llvm-reviews.chandlerc.com/D598
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179725 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
crashes llvm-objdump on relocated objects with large bss
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179589 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179534 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is a rework of the broken parts in r179373 which were subsequently reverted in r179374 due to incompatibility with C++98 compilers. This version should be ok under C++98.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179520 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
I can fix the testcases here:
http://lab.llvm.org:8011/builders/clang-native-arm-cortex-a9/builds/6952
This reverts commit r179512 due to testcases specifying triples
that they didn't actually mean and causing failures on other platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179513 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179512 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This reverts commit r179497 and the accompanying commit as it broke random platforms that aren't osx.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179499 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
and use that as the default triple for the module and target
data layout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179497 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We are now able to handle big endian macho files in llvm-readobject. Thanks to
David Fang for providing the object files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179440 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
You can't copy an OwningPtr, and move semantics aren't available in C++98.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179374 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179373 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179363 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This option expands shown relocations from single line to a dictionary
format:
Relocation {
Offset: 0x4
Type: R_386_32 (1)
Symbol: sym
Info: 0x0
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179359 91177308-0d34-0410-b5e6-96231b3b80d8
|