Age | Commit message (Collapse) | Author |
|
This patch finally enables the SystemZ target in the default build
(with --enable-targets=all).
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181209 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This patch wires up the SystemZ target in configure, so that it can now be
built using --enable-targets=systemz. It is not yet included in the default
build (--enable-targets=all); this will be done by a follow-up patch.
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181208 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180169 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174054 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167987 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167716 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
as valid triples denote Mips target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166961 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
See: http://en.wikipedia.org/wiki/If_and_only_if Commit 164767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164768 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164767 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160621 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This reverts commit e3013202259ed1e006c21817c63cf25d75982721.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160301 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160272 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158670 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This back-end was deprecated in favor of the NVPTX back-end.
NV_CONTRIB
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157417 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
We might just use symlinks here, but I'm afraid of possible portability issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156235 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
for NVIDIA PTX 3.0. This back-end will (eventually) replace the current PTX back-end, while maintaining compatibility with it.
The new target machines are:
nvptx (old ptx32) => 32-bit PTX
nvptx64 (old ptx64) => 64-bit PTX
The sources are based on the internal NVIDIA NVPTX back-end, and
contain more functionality than the current PTX back-end currently
provides.
NV_CONTRIB
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156196 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This change replaces projects/sample/autoconf/config.sub with a copy of
autoconf/config.sub.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155703 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154117 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154114 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Ojab.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153476 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
--enable-libcpp to projects/sample.
Patch by Dmitri Shubin with additional fixes by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153425 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153307 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
buildsystem doesn't depend on perl anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152234 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
sure we don't use it with compilers that don't support it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151665 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Clang builds. The detection logic for compilers that support the warning
isn't working. Rafael is going to investigate it, but didn't want people
to have to wade through build spam until then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151649 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151609 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
--with-gcc-toolchain
that just uses the new toolchain probing logic. This fixes linking with -m32 on
64 bit systems (the /32 dir was not being added to the search).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149651 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147608 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Get back getHostTriple.
For JIT compilation, use the host triple instead of the default
target: this fixes some JIT testcases that used to fail when the
compiler has been configured as a cross compiler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147542 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146412 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143501 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143500 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143164 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Dimitry Andric!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142995 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142880 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142878 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
so that projects/sample is standalone and not tied to the LLVM build setup.
- This currently just moves over all of the behavior from LLVM. Eventually all of the configure checks that are directly needed by the LLVM build setup should probably go away, and the project should manage their own configuration checks if necessary.
- This is the 1st half of this work, the actual Makefile.common hasn't moved over yet. I've tried to stage this in such a way that incremental builds will properly reconfigure for most active developers (the Makefiles don't handle reconfiguring in a perfectly reliable way, and I haven't found an easy way to make them do so).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142456 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Luis Felipe Strano Moraes!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129558 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
autoconf directory, but these paths need to be relative to the main
source directory. Patch originally by Dan Gohman, r67655.
Also, cause configure.ac to find absolute paths to LLVM source and
object trees. Together, fixes PR1220.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121645 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Patch by Torvald Riegel!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94405 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
not going to persue this further at this time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67666 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
autoconf directory, but these paths need to be relative to the main
source directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67655 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67654 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67647 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37801 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
directories if it can't find them. Then, replace those values into the
configure.ac script and pass them to the LLVM_CONFIG_PROJECT so that the
values become the default for llvm_src and llvm_obj variables. In this way
the user is required to input this exactly once, and the scripts take it
from there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27798 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
avoids version conflict problems with ltmain.sh (libtool), mkinstalldirs
and install-sh. This prevents projects from becoming stale when the LLVM
build system is upgraded or modified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20311 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
* Make the auxilliary directory be llvm/autoconf not the project's
* Use the LLVM_CONFIG_PROJECT macro to get the --with-llvm{src,obj} args
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20310 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20309 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
* Make aclocal look in LLVM's autoconf/m4 directory for macros
* Don't force generation of missing files
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20307 91177308-0d34-0410-b5e6-96231b3b80d8
|