| Age | Commit message (Collapse) | Author |
|---|
|
pointer is known positive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181745 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
if and only if we are both KnownSafeBU/KnownSafeTD rather than just either or.
In the presense of a block being initialized, the frontend will emit the
objc_retain on the original pointer and the release on the pointer loaded from
the alloca. The optimizer will through the provenance analysis realize that the
two are related (albiet different), but since we only require KnownSafe in one
direction, will match the inner retain on the original pointer with the guard
release on the original pointer. This is fixed by ensuring that in the presense
of allocas we only unconditionally remove pointers if both our retain and our
release are KnownSafe (i.e. we are KnownSafe in both directions) since we must
deal with the possibility that the frontend will emit what (to the optimizer)
appears to be unbalanced retain/releases.
An example of the miscompile is:
%A = alloca
retain(%x)
retain(%x) <--- Inner Retain
store %x, %A
%y = load %A
... DO STUFF ...
release(%y)
call void @use(%x)
release(%x) <--- Guarding Release
getting optimized to:
%A = alloca
retain(%x)
store %x, %A
%y = load %A
... DO STUFF ...
release(%y)
call void @use(%x)
rdar://13750319
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181743 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Suppresses an unused-variable warning in -Asserts builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181733 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
get{TopDown,BottomUp}PtrState will create a new PtrState object if it does not find a PtrState for Arg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181726 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
OptimizeIndividualCalls.
This makes the statistics gathering completely independent of the actual
optimization occuring, preventing any sort of bleeding over from occuring.
Additionally, it simplifies a switch statement in the non-statistic gathering case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181719 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
constructor enables
Patch by Robert Wilhelm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181138 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the things, and renames it to CBindingWrapping.h. I also moved
CBindingWrapping.h into Support/.
This new file just contains the macros for defining different wrap/unwrap
methods.
The calls to those macros, as well as any custom wrap/unwrap definitions
(like for array of Values for example), are put into corresponding C++
headers.
Doing this required some #include surgery, since some .cpp files relied
on the fact that including Wrap.h implicitly caused the inclusion of a
bunch of other things.
This also now means that the C++ headers will include their corresponding
C API headers; for example Value.h must include llvm-c/Core.h. I think
this is harmless, since the C API headers contain just external function
declarations and some C types, so I don't believe there should be any
nasty dependency issues here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180881 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180700 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ObjCARCContract instead of ObjCARCOpts.
Turning retains into retainRV calls disrupts the data flow analysis in
ObjCARCOpts. Thus we move it as late as we can by moving it into
ObjCARCContract.
We leave in the conversion from retainRV -> retain in ObjCARCOpt since
it enables the dataflow analysis.
rdar://10813093
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180698 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180697 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180696 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180694 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ConnectTDBUTraversals so that I can prevent Changed = true from being set. This prevents an infinite loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180693 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that were once autoreleaseRV instructions."
This reverts commit r180222.
I think this might tie in with a different problem which will require a
different approach potentially. I am reverting this in the case I need to go
down that second path.
My apologies for the noise. = /.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180590 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
were once autoreleaseRV instructions.
Due to the semantics of ARC, we must be extremely conservative with autorelease
calls inserted by the frontend since ARC gaurantees that said object will be in
the autorelease pool after that point, an optimization invariant that the
optimizer must respect.
On the other hand, we are allowed significantly more flexibility with
autoreleaseRV instructions.
Often times though this flexibility is disrupted by early transformations which
transform objc_autoreleaseRV => objc_autorelease if said instruction is no
longer being used as part of an RV pair (generally due to inlining). Since we
can not tell the difference in between an autorelease put into place by the
frontend and one created through said ``strength reduction'' we can not perform
these optimizations.
The addition of this set gets around said issues by allowing us to differentiate
in between said two cases.
rdar://problem/13697741.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180222 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180221 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
or the C++ files themselves. This enables people to use
just a C compiler to interoperate with LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180063 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
NumPeeps and make sure that Changed is set to true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179968 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179967 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179966 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179965 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
large multi-level nested if statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179964 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
progress.
This will make it clearer when we are actually resetting a sequence's progress
vs just changing state. This is an important distinction because the former case
clears any pointers that we are tracking while the later does not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179963 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
outside said for loop in the presense of differing provenance caused by escaping blocks.
This occurs due to an alloca representing a separate ownership from the
original pointer. Thus consider the following pseudo-IR:
objc_retain(%a)
for (...) {
objc_retain(%a)
%block <- %a
F(%block)
objc_release(%block)
}
objc_release(%a)
From the perspective of the optimizer, the %block is a separate
provenance from the original %a. Thus the optimizer pairs up the inner
retain for %a and the outer release from %a, resulting in segfaults.
This is fixed by noting that the signature of a mismatch of
retain/releases inside the for loop is a Use/CanRelease top down with an
None bottom up (since bottom up the Retain-CanRelease-Use-Release
sequence is completed by the inner objc_retain, but top down due to the
differing provenance from the objc_release said sequence is not
completed). In said case in CheckForCFGHazards, we now clear the state
of %a implying that no pairing will occur.
Additionally a test case is included.
rdar://12969722
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179747 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179746 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ssa identifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179729 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179721 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
EnableCheckForCFGHazards, EnableARCOptimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179718 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179717 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179132 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178932 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This is the counterpart to commit r160637, except it performs the action
in the bottomup portion of the data flow analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178922 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The normal dataflow sequence in the ARC optimizer consists of the following
states:
Retain -> CanRelease -> Use -> Release
The optimizer before this patch stored the uses that determine the lifetime of
the retainable object pointer when it bottom up hits a retain or when top down
it hits a release. This is correct for an imprecise lifetime scenario since what
we are trying to do is remove retains/releases while making sure that no
``CanRelease'' (which is usually a call) deallocates the given pointer before we
get to the ``Use'' (since that would cause a segfault).
If we are considering the precise lifetime scenario though, this is not
correct. In such a situation, we *DO* care about the previous sequence, but
additionally, we wish to track the uses resulting from the following incomplete
sequences:
Retain -> CanRelease -> Release (TopDown)
Retain <- Use <- Release (BottomUp)
*NOTE* This patch looks large but the most of it consists of updating
test cases. Additionally this fix exposed an additional bug. I removed
the test case that expressed said bug and will recommit it with the fix
in a little bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178921 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
VisitInstructionsBottomUp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178895 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178893 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ObjCARCOpt::OptimizeReturns.
Now ObjCARCOpt::OptimizeReturns is easy to read and reason about.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178715 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ObjCARCOpt::OptimizeReturns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178714 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Cleaned up trailing whitespace and added extra slashes in front of a
function level comment so that it follow the convention of having 3
slashes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178712 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
HasSafePathToPredecessorCall.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178710 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178709 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
conditional macros that no-op in Release mode instead of #ifdef sections of the code.
This is to follow the example of the DEBUG macro.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178705 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
objc_autoreleaseReturnValue.
The semantics of ARC implies that a pointer passed into an objc_autorelease
must live until some point (potentially down the stack) where an
autorelease pool is popped. On the other hand, an
objc_autoreleaseReturnValue just signifies that the object must live
until the end of the given function at least.
Thus objc_autorelease is stronger than objc_autoreleaseReturnValue in
terms of the semantics of ARC* implying that performing the given
strength reduction without any knowledge of how this relates to
the autorelease pool pop that is further up the stack violates the
semantics of ARC.
*Even though objc_autoreleaseReturnValue if you know that no RV
optimization will occur is more computationally expensive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178612 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178605 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
present in a module.
clang.arc.used is an interesting call for ARC since ObjCARCContract
needs to run to remove said intrinsic to avoid a linker error (since the
call does not exist).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178369 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178329 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
through the ARC Dataflow analysis. By the time we get to the ARC dataflow analysis, any objc_retainBlock calls are not optimizable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178306 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Since we handle optimizable objc_retainBlocks through strength reduction
in OptimizableIndividualCalls, we know that all code after that point
will only see non-optimizable objc_retainBlock calls. IsForwarding is
only called by functions after that point, so it is ok to just classify
objc_retainBlock as non-forwarding.
<rdar://problem/13249661>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178285 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
objc_retainBlock is optimizable.
If an objc_retainBlock has the copy_on_escape metadata attached to it
AND if the block pointer argument only escapes down the stack, we are
allowed to strength reduce the objc_retainBlock to to an objc_retain and
thus optimize it.
Current there is logic in the ARC data flow analysis to handle
this case which is complicated and involved making distinctions in
between objc_retainBlock and objc_retain in certain places and
considering them the same in others.
This patch simplifies said code by:
1. Performing the strength reduction in the initial ARC peephole
analysis (ObjCARCOpts::OptimizeIndividualCalls).
2. Changes the ARC dataflow analysis (which runs after the peephole
analysis) to consider all objc_retainBlock calls to not be optimizable
(since if the call was optimizable, we would have strength reduced it
already).
This patch leaves in the infrastructure in the ARC dataflow analysis to
handle this case, which due to 2 will just be dead code. I am doing this
on purpose to separate the removal of the old code from the testing of
the new code.
<rdar://problem/13249661>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178284 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the bottom/top of BBs of the ARC dataflow analysis for both bottomup and topdown analyses.
This will allow for verification and analysis of the merge function of
the data flow analyses in the ARC optimizer.
The actual implementation of this feature is by introducing calls to
the functions llvm.arc.annotation.{bottomup,topdown}.{bbstart,bbend}
which are only declared. Each such call takes in a pointer to a global
with the same name as the pointer whose provenance is being tracked and
a pointer whose name is one of our Sequence states and points to a
string that contains the same name.
To ensure that the optimizer does not consider these annotations in any
way, I made it so that the annotations are considered to be of IC_None
type.
A test case is included for this commit and the previous
ObjCARCAnnotation commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177952 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
data flow analysis state in the IR via metadata.
Previously the inner works of the data flow analysis in ObjCARCOpts was hard to
get out of the optimizer for analysis of bugs or testing. All of the current ARC
unit tests are based off of testing the effect of the data flow
analysis (i.e. what statements are removed or moved, etc.). This creates
weakness in the current unit testing regimem since we are not actually testing
what effects various instructions have on the modeled pointer state.
Additionally in order to analyze a bug in the optimizer, one would need to track
by hand what the optimizer was actually doing either through use of DEBUG
statements or through the usage of a debugger, both yielding large loses in
developer productivity.
This patch deals with these two issues by providing ARC annotation
metadata that annotates instructions with the state changes that they cause in
various pointers as well as provides metadata to annotate provenance sources.
Specifically, we introduce the following metadata types:
1. llvm.arc.annotation.bottomup.
2. llvm.arc.annotation.topdown.
3. llvm.arc.annotation.provenancesource.
llvm.arc.annotation.{bottomup,topdown}: These annotations describes a state
change in a pointer when we are visiting instructions bottomup/topdown
respectively. The output format for both is the same:
!1 = metadata !{metadata !"(test,%x)", metadata !"S_Release", metadata !"S_Use"}
The first element is a string tuple with the following format:
(function,variable name)
The second two elements of the metadata show the previous state of the
pointer (in this case S_Release) and the new state of the pointer (S_Use). We
write the metadata in such a manner to ensure that it is easy for outside tools
to parse. This is important since I am currently working on a tool for taking
this information and pretty printing it besides the IR and that can be used for
LIT style testing via the generation of an index.
llvm.arc.annotation.provenancesource: This metadata is used to annotate
instructions which act as provenance sources, i.e. ones that introduce a
new (from the optimizer's perspective) non-argument pointer to track. This
enables cross-referencing in between provenance sources and the state changes
that occur to them.
This is still a work in progress. Additionally I plan on committing
later today additions to the annotations that annotate at the top/bottom
of basic blocks the state of the various pointers being tracked.
*NOTE* The metadata support is conditionally compiled into libObjCARCOpts only
when we are producing a debug build of llvm/clang and even so are
disabled by default. To enable the annotation metadata, pass in
-enable-objc-arc-annotations to opt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177951 91177308-0d34-0410-b5e6-96231b3b80d8
|
